|  | /* | 
|  | * Author       Andreas Eversberg ([email protected]) | 
|  | * Based on source code structure by | 
|  | *		Karsten Keil ([email protected]) | 
|  | * | 
|  | *		This file is (c) under GNU PUBLIC LICENSE | 
|  | *		For changes and modifications please read | 
|  | *		../../../Documentation/isdn/mISDN.cert | 
|  | * | 
|  | * Thanks to    Karsten Keil (great drivers) | 
|  | *              Cologne Chip (great chips) | 
|  | * | 
|  | * This module does: | 
|  | *		Real-time tone generation | 
|  | *		DTMF detection | 
|  | *		Real-time cross-connection and conferrence | 
|  | *		Compensate jitter due to system load and hardware fault. | 
|  | *		All features are done in kernel space and will be realized | 
|  | *		using hardware, if available and supported by chip set. | 
|  | *		Blowfish encryption/decryption | 
|  | */ | 
|  |  | 
|  | /* STRUCTURE: | 
|  | * | 
|  | * The dsp module provides layer 2 for b-channels (64kbit). It provides | 
|  | * transparent audio forwarding with special digital signal processing: | 
|  | * | 
|  | * - (1) generation of tones | 
|  | * - (2) detection of dtmf tones | 
|  | * - (3) crossconnecting and conferences (clocking) | 
|  | * - (4) echo generation for delay test | 
|  | * - (5) volume control | 
|  | * - (6) disable receive data | 
|  | * - (7) pipeline | 
|  | * - (8) encryption/decryption | 
|  | * | 
|  | * Look: | 
|  | *             TX            RX | 
|  | *         ------upper layer------ | 
|  | *             |             ^ | 
|  | *             |             |(6) | 
|  | *             v             | | 
|  | *       +-----+-------------+-----+ | 
|  | *       |(3)(4)                   | | 
|  | *       |           CMX           | | 
|  | *       |                         | | 
|  | *       |           +-------------+ | 
|  | *       |           |       ^ | 
|  | *       |           |       | | 
|  | *       |+---------+|  +----+----+ | 
|  | *       ||(1)      ||  |(2)      | | 
|  | *       ||         ||  |         | | 
|  | *       ||  Tones  ||  |  DTMF   | | 
|  | *       ||         ||  |         | | 
|  | *       ||         ||  |         | | 
|  | *       |+----+----+|  +----+----+ | 
|  | *       +-----+-----+       ^ | 
|  | *             |             | | 
|  | *             v             | | 
|  | *        +----+----+   +----+----+ | 
|  | *        |(5)      |   |(5)      | | 
|  | *        |         |   |         | | 
|  | *        |TX Volume|   |RX Volume| | 
|  | *        |         |   |         | | 
|  | *        |         |   |         | | 
|  | *        +----+----+   +----+----+ | 
|  | *             |             ^ | 
|  | *             |             | | 
|  | *             v             | | 
|  | *        +----+-------------+----+ | 
|  | *        |(7)                    | | 
|  | *        |                       | | 
|  | *        |  Pipeline Processing  | | 
|  | *        |                       | | 
|  | *        |                       | | 
|  | *        +----+-------------+----+ | 
|  | *             |             ^ | 
|  | *             |             | | 
|  | *             v             | | 
|  | *        +----+----+   +----+----+ | 
|  | *        |(8)      |   |(8)      | | 
|  | *        |         |   |         | | 
|  | *        | Encrypt |   | Decrypt | | 
|  | *        |         |   |         | | 
|  | *        |         |   |         | | 
|  | *        +----+----+   +----+----+ | 
|  | *             |             ^ | 
|  | *             |             | | 
|  | *             v             | | 
|  | *         ------card  layer------ | 
|  | *             TX            RX | 
|  | * | 
|  | * Above you can see the logical data flow. If software is used to do the | 
|  | * process, it is actually the real data flow. If hardware is used, data | 
|  | * may not flow, but hardware commands to the card, to provide the data flow | 
|  | * as shown. | 
|  | * | 
|  | * NOTE: The channel must be activated in order to make dsp work, even if | 
|  | * no data flow to the upper layer is intended. Activation can be done | 
|  | * after and before controlling the setting using PH_CONTROL requests. | 
|  | * | 
|  | * DTMF: Will be detected by hardware if possible. It is done before CMX | 
|  | * processing. | 
|  | * | 
|  | * Tones: Will be generated via software if endless looped audio fifos are | 
|  | * not supported by hardware. Tones will override all data from CMX. | 
|  | * It is not required to join a conference to use tones at any time. | 
|  | * | 
|  | * CMX: Is transparent when not used. When it is used, it will do | 
|  | * crossconnections and conferences via software if not possible through | 
|  | * hardware. If hardware capability is available, hardware is used. | 
|  | * | 
|  | * Echo: Is generated by CMX and is used to check performane of hard and | 
|  | * software CMX. | 
|  | * | 
|  | * The CMX has special functions for conferences with one, two and more | 
|  | * members. It will allow different types of data flow. Receive and transmit | 
|  | * data to/form upper layer may be swithed on/off individually without loosing | 
|  | * features of CMX, Tones and DTMF. | 
|  | * | 
|  | * Echo Cancellation: Sometimes we like to cancel echo from the interface. | 
|  | * Note that a VoIP call may not have echo caused by the IP phone. The echo | 
|  | * is generated by the telephone line connected to it. Because the delay | 
|  | * is high, it becomes an echo. RESULT: Echo Cachelation is required if | 
|  | * both echo AND delay is applied to an interface. | 
|  | * Remember that software CMX always generates a more or less delay. | 
|  | * | 
|  | * If all used features can be realized in hardware, and if transmit and/or | 
|  | * receive data ist disabled, the card may not send/receive any data at all. | 
|  | * Not receiving is usefull if only announcements are played. Not sending is | 
|  | * usefull if an answering machine records audio. Not sending and receiving is | 
|  | * usefull during most states of the call. If supported by hardware, tones | 
|  | * will be played without cpu load. Small PBXs and NT-Mode applications will | 
|  | * not need expensive hardware when processing calls. | 
|  | * | 
|  | * | 
|  | * LOCKING: | 
|  | * | 
|  | * When data is received from upper or lower layer (card), the complete dsp | 
|  | * module is locked by a global lock.  This lock MUST lock irq, because it | 
|  | * must lock timer events by DSP poll timer. | 
|  | * When data is ready to be transmitted down, the data is queued and sent | 
|  | * outside lock and timer event. | 
|  | * PH_CONTROL must not change any settings, join or split conference members | 
|  | * during process of data. | 
|  | * | 
|  | * HDLC: | 
|  | * | 
|  | * It works quite the same as transparent, except that HDLC data is forwarded | 
|  | * to all other conference members if no hardware bridging is possible. | 
|  | * Send data will be writte to sendq. Sendq will be sent if confirm is received. | 
|  | * Conference cannot join, if one member is not hdlc. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/mISDNif.h> | 
|  | #include <linux/mISDNdsp.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include "core.h" | 
|  | #include "dsp.h" | 
|  |  | 
|  | static const char *mISDN_dsp_revision = "2.0"; | 
|  |  | 
|  | static int debug; | 
|  | static int options; | 
|  | static int poll; | 
|  | static int dtmfthreshold = 100; | 
|  |  | 
|  | MODULE_AUTHOR("Andreas Eversberg"); | 
|  | module_param(debug, uint, S_IRUGO | S_IWUSR); | 
|  | module_param(options, uint, S_IRUGO | S_IWUSR); | 
|  | module_param(poll, uint, S_IRUGO | S_IWUSR); | 
|  | module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | /*int spinnest = 0;*/ | 
|  |  | 
|  | spinlock_t dsp_lock; /* global dsp lock */ | 
|  | struct list_head dsp_ilist; | 
|  | struct list_head conf_ilist; | 
|  | int dsp_debug; | 
|  | int dsp_options; | 
|  | int dsp_poll, dsp_tics; | 
|  |  | 
|  | /* check if rx may be turned off or must be turned on */ | 
|  | static void | 
|  | dsp_rx_off_member(struct dsp *dsp) | 
|  | { | 
|  | struct mISDN_ctrl_req	cq; | 
|  | int rx_off = 1; | 
|  |  | 
|  | memset(&cq, 0, sizeof(cq)); | 
|  |  | 
|  | if (!dsp->features_rx_off) | 
|  | return; | 
|  |  | 
|  | /* not disabled */ | 
|  | if (!dsp->rx_disabled) | 
|  | rx_off = 0; | 
|  | /* software dtmf */ | 
|  | else if (dsp->dtmf.software) | 
|  | rx_off = 0; | 
|  | /* echo in software */ | 
|  | else if (dsp->echo && dsp->pcm_slot_tx < 0) | 
|  | rx_off = 0; | 
|  | /* bridge in software */ | 
|  | else if (dsp->conf) { | 
|  | if (dsp->conf->software) | 
|  | rx_off = 0; | 
|  | } | 
|  |  | 
|  | if (rx_off == dsp->rx_is_off) | 
|  | return; | 
|  |  | 
|  | if (!dsp->ch.peer) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: no peer, no rx_off\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | cq.op = MISDN_CTRL_RX_OFF; | 
|  | cq.p1 = rx_off; | 
|  | if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { | 
|  | printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | dsp->rx_is_off = rx_off; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: %s set rx_off = %d\n", | 
|  | __func__, dsp->name, rx_off); | 
|  | } | 
|  | static void | 
|  | dsp_rx_off(struct dsp *dsp) | 
|  | { | 
|  | struct dsp_conf_member	*member; | 
|  |  | 
|  | if (dsp_options & DSP_OPT_NOHARDWARE) | 
|  | return; | 
|  |  | 
|  | /* no conf */ | 
|  | if (!dsp->conf) { | 
|  | dsp_rx_off_member(dsp); | 
|  | return; | 
|  | } | 
|  | /* check all members in conf */ | 
|  | list_for_each_entry(member, &dsp->conf->mlist, list) { | 
|  | dsp_rx_off_member(member->dsp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* enable "fill empty" feature */ | 
|  | static void | 
|  | dsp_fill_empty(struct dsp *dsp) | 
|  | { | 
|  | struct mISDN_ctrl_req	cq; | 
|  |  | 
|  | memset(&cq, 0, sizeof(cq)); | 
|  |  | 
|  | if (!dsp->ch.peer) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: no peer, no fill_empty\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | cq.op = MISDN_CTRL_FILL_EMPTY; | 
|  | cq.p1 = 1; | 
|  | if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { | 
|  | printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: %s set fill_empty = 1\n", | 
|  | __func__, dsp->name); | 
|  | } | 
|  |  | 
|  | static int | 
|  | dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb) | 
|  | { | 
|  | struct		sk_buff *nskb; | 
|  | int ret = 0; | 
|  | int cont; | 
|  | u8 *data; | 
|  | int len; | 
|  |  | 
|  | if (skb->len < sizeof(int)) | 
|  | printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__); | 
|  | cont = *((int *)skb->data); | 
|  | len = skb->len - sizeof(int); | 
|  | data = skb->data + sizeof(int); | 
|  |  | 
|  | switch (cont) { | 
|  | case DTMF_TONE_START: /* turn on DTMF */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: start dtmf\n", __func__); | 
|  | if (len == sizeof(int)) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_NOTICE "changing DTMF Threshold " | 
|  | "to %d\n", *((int *)data)); | 
|  | dsp->dtmf.treshold = (*(int *)data) * 10000; | 
|  | } | 
|  | /* init goertzel */ | 
|  | dsp_dtmf_goertzel_init(dsp); | 
|  |  | 
|  | /* check dtmf hardware */ | 
|  | dsp_dtmf_hardware(dsp); | 
|  | break; | 
|  | case DTMF_TONE_STOP: /* turn off DTMF */ | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: stop dtmf\n", __func__); | 
|  | dsp->dtmf.hardware = 0; | 
|  | dsp->dtmf.software = 0; | 
|  | break; | 
|  | case DSP_CONF_JOIN: /* join / update conference */ | 
|  | if (len < sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (*((u32 *)data) == 0) | 
|  | goto conf_split; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: join conference %d\n", | 
|  | __func__, *((u32 *)data)); | 
|  | ret = dsp_cmx_conf(dsp, *((u32 *)data)); | 
|  | /* dsp_cmx_hardware will also be called here */ | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_CONF_SPLIT: /* remove from conference */ | 
|  | conf_split: | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: release conference\n", __func__); | 
|  | ret = dsp_cmx_conf(dsp, 0); | 
|  | /* dsp_cmx_hardware will also be called here */ | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | case DSP_TONE_PATT_ON: /* play tone */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len < sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: turn tone 0x%x on\n", | 
|  | __func__, *((int *)skb->data)); | 
|  | ret = dsp_tone(dsp, *((int *)data)); | 
|  | if (!ret) { | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | } | 
|  | if (!dsp->tone.tone) | 
|  | goto tone_off; | 
|  | break; | 
|  | case DSP_TONE_PATT_OFF: /* stop tone */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: turn tone off\n", __func__); | 
|  | dsp_tone(dsp, 0); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | /* reset tx buffers (user space data) */ | 
|  | tone_off: | 
|  | dsp->rx_W = 0; | 
|  | dsp->rx_R = 0; | 
|  | break; | 
|  | case DSP_VOL_CHANGE_TX: /* change volume */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len < sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->tx_volume = *((int *)data); | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: change tx vol to %d\n", | 
|  | __func__, dsp->tx_volume); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | case DSP_VOL_CHANGE_RX: /* change volume */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len < sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->rx_volume = *((int *)data); | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: change rx vol to %d\n", | 
|  | __func__, dsp->tx_volume); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | case DSP_ECHO_ON: /* enable echo */ | 
|  | dsp->echo = 1; /* soft echo */ | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_ECHO_OFF: /* disable echo */ | 
|  | dsp->echo = 0; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_RECEIVE_ON: /* enable receive to user space */ | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: enable receive to user " | 
|  | "space\n", __func__); | 
|  | dsp->rx_disabled = 0; | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | case DSP_RECEIVE_OFF: /* disable receive to user space */ | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: disable receive to " | 
|  | "user space\n", __func__); | 
|  | dsp->rx_disabled = 1; | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | case DSP_MIX_ON: /* enable mixing of tx data */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: enable mixing of " | 
|  | "tx-data with conf mebers\n", __func__); | 
|  | dsp->tx_mix = 1; | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_MIX_OFF: /* disable mixing of tx data */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: disable mixing of " | 
|  | "tx-data with conf mebers\n", __func__); | 
|  | dsp->tx_mix = 0; | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_TXDATA_ON: /* enable txdata */ | 
|  | dsp->tx_data = 1; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: enable tx-data\n", __func__); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_TXDATA_OFF: /* disable txdata */ | 
|  | dsp->tx_data = 0; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: disable tx-data\n", __func__); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | if (dsp_debug & DEBUG_DSP_CMX) | 
|  | dsp_cmx_debug(dsp); | 
|  | break; | 
|  | case DSP_DELAY: /* use delay algorithm instead of dynamic | 
|  | jitter algorithm */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len < sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->cmx_delay = (*((int *)data)) << 3; | 
|  | /* miliseconds to samples */ | 
|  | if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1)) | 
|  | /* clip to half of maximum usable buffer | 
|  | (half of half buffer) */ | 
|  | dsp->cmx_delay = (CMX_BUFF_HALF>>1) - 1; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: use delay algorithm to " | 
|  | "compensate jitter (%d samples)\n", | 
|  | __func__, dsp->cmx_delay); | 
|  | break; | 
|  | case DSP_JITTER: /* use dynamic jitter algorithm instead of | 
|  | delay algorithm */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->cmx_delay = 0; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: use jitter algorithm to " | 
|  | "compensate jitter\n", __func__); | 
|  | break; | 
|  | case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->tx_dejitter = 1; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: use dejitter on TX " | 
|  | "buffer\n", __func__); | 
|  | break; | 
|  | case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | dsp->tx_dejitter = 0; | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: use TX buffer without " | 
|  | "dejittering\n", __func__); | 
|  | break; | 
|  | case DSP_PIPELINE_CFG: | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len > 0 && ((char *)data)[len - 1]) { | 
|  | printk(KERN_DEBUG "%s: pipeline config string " | 
|  | "is not NULL terminated!\n", __func__); | 
|  | ret = -EINVAL; | 
|  | } else { | 
|  | dsp->pipeline.inuse = 1; | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | ret = dsp_pipeline_build(&dsp->pipeline, | 
|  | len > 0 ? (char *)data : NULL); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | } | 
|  | break; | 
|  | case DSP_BF_ENABLE_KEY: /* turn blowfish on */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (len < 4 || len > 56) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: turn blowfish on (key " | 
|  | "not shown)\n", __func__); | 
|  | ret = dsp_bf_init(dsp, (u8 *)data, len); | 
|  | /* set new cont */ | 
|  | if (!ret) | 
|  | cont = DSP_BF_ACCEPT; | 
|  | else | 
|  | cont = DSP_BF_REJECT; | 
|  | /* send indication if it worked to set it */ | 
|  | nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY, | 
|  | sizeof(int), &cont, GFP_ATOMIC); | 
|  | if (nskb) { | 
|  | if (dsp->up) { | 
|  | if (dsp->up->send(dsp->up, nskb)) | 
|  | dev_kfree_skb(nskb); | 
|  | } else | 
|  | dev_kfree_skb(nskb); | 
|  | } | 
|  | if (!ret) { | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | } | 
|  | break; | 
|  | case DSP_BF_DISABLE: /* turn blowfish off */ | 
|  | if (dsp->hdlc) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: turn blowfish off\n", __func__); | 
|  | dsp_bf_cleanup(dsp); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | break; | 
|  | default: | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: ctrl req %x unhandled\n", | 
|  | __func__, cont); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void | 
|  | get_features(struct mISDNchannel *ch) | 
|  | { | 
|  | struct dsp		*dsp = container_of(ch, struct dsp, ch); | 
|  | struct mISDN_ctrl_req	cq; | 
|  |  | 
|  | if (!ch->peer) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: no peer, no features\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | memset(&cq, 0, sizeof(cq)); | 
|  | cq.op = MISDN_CTRL_GETOP; | 
|  | if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) { | 
|  | printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", | 
|  | __func__); | 
|  | return; | 
|  | } | 
|  | if (cq.op & MISDN_CTRL_RX_OFF) | 
|  | dsp->features_rx_off = 1; | 
|  | if (cq.op & MISDN_CTRL_FILL_EMPTY) | 
|  | dsp->features_fill_empty = 1; | 
|  | if (dsp_options & DSP_OPT_NOHARDWARE) | 
|  | return; | 
|  | if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) { | 
|  | cq.op = MISDN_CTRL_HW_FEATURES; | 
|  | *((u_long *)&cq.p1) = (u_long)&dsp->features; | 
|  | if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) { | 
|  | printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", | 
|  | __func__); | 
|  | } | 
|  | } else | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: features not supported for %s\n", | 
|  | __func__, dsp->name); | 
|  | } | 
|  |  | 
|  | static int | 
|  | dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb) | 
|  | { | 
|  | struct dsp			*dsp = container_of(ch, struct dsp, ch); | 
|  | struct mISDNhead	*hh; | 
|  | int			ret = 0; | 
|  | u8			*digits; | 
|  | int			cont; | 
|  | u_long			flags; | 
|  |  | 
|  | hh = mISDN_HEAD_P(skb); | 
|  | switch (hh->prim) { | 
|  | /* FROM DOWN */ | 
|  | case (PH_DATA_CNF): | 
|  | dsp->data_pending = 0; | 
|  | /* trigger next hdlc frame, if any */ | 
|  | if (dsp->hdlc) { | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | if (dsp->b_active) | 
|  | schedule_work(&dsp->workq); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | } | 
|  | break; | 
|  | case (PH_DATA_IND): | 
|  | case (DL_DATA_IND): | 
|  | if (skb->len < 1) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp->rx_is_off) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: rx-data during rx_off" | 
|  | " for %s\n", | 
|  | __func__, dsp->name); | 
|  | } | 
|  | if (dsp->hdlc) { | 
|  | /* hdlc */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp_cmx_hdlc(dsp, skb); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | if (dsp->rx_disabled) { | 
|  | /* if receive is not allowed */ | 
|  | break; | 
|  | } | 
|  | hh->prim = DL_DATA_IND; | 
|  | if (dsp->up) | 
|  | return dsp->up->send(dsp->up, skb); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* decrypt if enabled */ | 
|  | if (dsp->bf_enable) | 
|  | dsp_bf_decrypt(dsp, skb->data, skb->len); | 
|  | /* pipeline */ | 
|  | if (dsp->pipeline.inuse) | 
|  | dsp_pipeline_process_rx(&dsp->pipeline, skb->data, | 
|  | skb->len); | 
|  | /* change volume if requested */ | 
|  | if (dsp->rx_volume) | 
|  | dsp_change_volume(skb, dsp->rx_volume); | 
|  |  | 
|  | /* check if dtmf soft decoding is turned on */ | 
|  | if (dsp->dtmf.software) { | 
|  | digits = dsp_dtmf_goertzel_decode(dsp, skb->data, | 
|  | skb->len, (dsp_options&DSP_OPT_ULAW)?1:0); | 
|  | while (*digits) { | 
|  | struct sk_buff *nskb; | 
|  | if (dsp_debug & DEBUG_DSP_DTMF) | 
|  | printk(KERN_DEBUG "%s: digit" | 
|  | "(%c) to layer %s\n", | 
|  | __func__, *digits, dsp->name); | 
|  | cont = DTMF_TONE_VAL | *digits; | 
|  | nskb = _alloc_mISDN_skb(PH_CONTROL_IND, | 
|  | MISDN_ID_ANY, sizeof(int), &cont, | 
|  | GFP_ATOMIC); | 
|  | if (nskb) { | 
|  | if (dsp->up) { | 
|  | if (dsp->up->send( | 
|  | dsp->up, nskb)) | 
|  | dev_kfree_skb(nskb); | 
|  | } else | 
|  | dev_kfree_skb(nskb); | 
|  | } | 
|  | digits++; | 
|  | } | 
|  | } | 
|  | /* we need to process receive data if software */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | if (dsp->pcm_slot_tx < 0 && dsp->pcm_slot_rx < 0) { | 
|  | /* process data from card at cmx */ | 
|  | dsp_cmx_receive(dsp, skb); | 
|  | } | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  |  | 
|  | if (dsp->rx_disabled) { | 
|  | /* if receive is not allowed */ | 
|  | break; | 
|  | } | 
|  | hh->prim = DL_DATA_IND; | 
|  | if (dsp->up) | 
|  | return dsp->up->send(dsp->up, skb); | 
|  | break; | 
|  | case (PH_CONTROL_IND): | 
|  | if (dsp_debug & DEBUG_DSP_DTMFCOEFF) | 
|  | printk(KERN_DEBUG "%s: PH_CONTROL INDICATION " | 
|  | "received: %x (len %d) %s\n", __func__, | 
|  | hh->id, skb->len, dsp->name); | 
|  | switch (hh->id) { | 
|  | case (DTMF_HFC_COEF): /* getting coefficients */ | 
|  | if (!dsp->dtmf.hardware) { | 
|  | if (dsp_debug & DEBUG_DSP_DTMFCOEFF) | 
|  | printk(KERN_DEBUG "%s: ignoring DTMF " | 
|  | "coefficients from HFC\n", | 
|  | __func__); | 
|  | break; | 
|  | } | 
|  | digits = dsp_dtmf_goertzel_decode(dsp, skb->data, | 
|  | skb->len, 2); | 
|  | while (*digits) { | 
|  | int k; | 
|  | struct sk_buff *nskb; | 
|  | if (dsp_debug & DEBUG_DSP_DTMF) | 
|  | printk(KERN_DEBUG "%s: digit" | 
|  | "(%c) to layer %s\n", | 
|  | __func__, *digits, dsp->name); | 
|  | k = *digits | DTMF_TONE_VAL; | 
|  | nskb = _alloc_mISDN_skb(PH_CONTROL_IND, | 
|  | MISDN_ID_ANY, sizeof(int), &k, | 
|  | GFP_ATOMIC); | 
|  | if (nskb) { | 
|  | if (dsp->up) { | 
|  | if (dsp->up->send( | 
|  | dsp->up, nskb)) | 
|  | dev_kfree_skb(nskb); | 
|  | } else | 
|  | dev_kfree_skb(nskb); | 
|  | } | 
|  | digits++; | 
|  | } | 
|  | break; | 
|  | case (HFC_VOL_CHANGE_TX): /* change volume */ | 
|  | if (skb->len != sizeof(int)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp->tx_volume = *((int *)skb->data); | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: change tx volume to " | 
|  | "%d\n", __func__, dsp->tx_volume); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | break; | 
|  | default: | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: ctrl ind %x unhandled " | 
|  | "%s\n", __func__, hh->id, dsp->name); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | break; | 
|  | case (PH_ACTIVATE_IND): | 
|  | case (PH_ACTIVATE_CNF): | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: b_channel is now active %s\n", | 
|  | __func__, dsp->name); | 
|  | /* bchannel now active */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp->b_active = 1; | 
|  | dsp->data_pending = 0; | 
|  | dsp->rx_init = 1; | 
|  | /* rx_W and rx_R will be adjusted on first frame */ | 
|  | dsp->rx_W = 0; | 
|  | dsp->rx_R = 0; | 
|  | memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff)); | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_dtmf_hardware(dsp); | 
|  | dsp_rx_off(dsp); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: done with activation, sending " | 
|  | "confirm to user space. %s\n", __func__, | 
|  | dsp->name); | 
|  | /* send activation to upper layer */ | 
|  | hh->prim = DL_ESTABLISH_CNF; | 
|  | if (dsp->up) | 
|  | return dsp->up->send(dsp->up, skb); | 
|  | break; | 
|  | case (PH_DEACTIVATE_IND): | 
|  | case (PH_DEACTIVATE_CNF): | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: b_channel is now inactive %s\n", | 
|  | __func__, dsp->name); | 
|  | /* bchannel now inactive */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp->b_active = 0; | 
|  | dsp->data_pending = 0; | 
|  | dsp_cmx_hardware(dsp->conf, dsp); | 
|  | dsp_rx_off(dsp); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | hh->prim = DL_RELEASE_CNF; | 
|  | if (dsp->up) | 
|  | return dsp->up->send(dsp->up, skb); | 
|  | break; | 
|  | /* FROM UP */ | 
|  | case (DL_DATA_REQ): | 
|  | case (PH_DATA_REQ): | 
|  | if (skb->len < 1) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (dsp->hdlc) { | 
|  | /* hdlc */ | 
|  | if (!dsp->b_active) { | 
|  | ret = -EIO; | 
|  | break; | 
|  | } | 
|  | hh->prim = PH_DATA_REQ; | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | skb_queue_tail(&dsp->sendq, skb); | 
|  | schedule_work(&dsp->workq); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | return 0; | 
|  | } | 
|  | /* send data to tx-buffer (if no tone is played) */ | 
|  | if (!dsp->tone.tone) { | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp_cmx_transmit(dsp, skb); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | } | 
|  | break; | 
|  | case (PH_CONTROL_REQ): | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | ret = dsp_control_req(dsp, hh, skb); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | break; | 
|  | case (DL_ESTABLISH_REQ): | 
|  | case (PH_ACTIVATE_REQ): | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: activating b_channel %s\n", | 
|  | __func__, dsp->name); | 
|  | if (dsp->dtmf.hardware || dsp->dtmf.software) | 
|  | dsp_dtmf_goertzel_init(dsp); | 
|  | get_features(ch); | 
|  | /* enable fill_empty feature */ | 
|  | if (dsp->features_fill_empty) | 
|  | dsp_fill_empty(dsp); | 
|  | /* send ph_activate */ | 
|  | hh->prim = PH_ACTIVATE_REQ; | 
|  | if (ch->peer) | 
|  | return ch->recv(ch->peer, skb); | 
|  | break; | 
|  | case (DL_RELEASE_REQ): | 
|  | case (PH_DEACTIVATE_REQ): | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: releasing b_channel %s\n", | 
|  | __func__, dsp->name); | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp->tone.tone = 0; | 
|  | dsp->tone.hardware = 0; | 
|  | dsp->tone.software = 0; | 
|  | if (timer_pending(&dsp->tone.tl)) | 
|  | del_timer(&dsp->tone.tl); | 
|  | if (dsp->conf) | 
|  | dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be | 
|  | called here */ | 
|  | skb_queue_purge(&dsp->sendq); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | hh->prim = PH_DEACTIVATE_REQ; | 
|  | if (ch->peer) | 
|  | return ch->recv(ch->peer, skb); | 
|  | break; | 
|  | default: | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: msg %x unhandled %s\n", | 
|  | __func__, hh->prim, dsp->name); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | if (!ret) | 
|  | dev_kfree_skb(skb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | 
|  | { | 
|  | struct dsp		*dsp = container_of(ch, struct dsp, ch); | 
|  | u_long		flags; | 
|  | int		err = 0; | 
|  |  | 
|  | if (debug & DEBUG_DSP_CTRL) | 
|  | printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case OPEN_CHANNEL: | 
|  | break; | 
|  | case CLOSE_CHANNEL: | 
|  | if (dsp->ch.peer) | 
|  | dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL); | 
|  |  | 
|  | /* wait until workqueue has finished, | 
|  | * must lock here, or we may hit send-process currently | 
|  | * queueing. */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp->b_active = 0; | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  | /* MUST not be locked, because it waits until queue is done. */ | 
|  | cancel_work_sync(&dsp->workq); | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | if (timer_pending(&dsp->tone.tl)) | 
|  | del_timer(&dsp->tone.tl); | 
|  | skb_queue_purge(&dsp->sendq); | 
|  | if (dsp_debug & DEBUG_DSP_CTRL) | 
|  | printk(KERN_DEBUG "%s: releasing member %s\n", | 
|  | __func__, dsp->name); | 
|  | dsp->b_active = 0; | 
|  | dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called | 
|  | here */ | 
|  | dsp_pipeline_destroy(&dsp->pipeline); | 
|  |  | 
|  | if (dsp_debug & DEBUG_DSP_CTRL) | 
|  | printk(KERN_DEBUG "%s: remove & destroy object %s\n", | 
|  | __func__, dsp->name); | 
|  | list_del(&dsp->list); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  |  | 
|  | if (dsp_debug & DEBUG_DSP_CTRL) | 
|  | printk(KERN_DEBUG "%s: dsp instance released\n", | 
|  | __func__); | 
|  | vfree(dsp); | 
|  | module_put(THIS_MODULE); | 
|  | break; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void | 
|  | dsp_send_bh(struct work_struct *work) | 
|  | { | 
|  | struct dsp *dsp = container_of(work, struct dsp, workq); | 
|  | struct sk_buff *skb; | 
|  | struct mISDNhead	*hh; | 
|  |  | 
|  | if (dsp->hdlc && dsp->data_pending) | 
|  | return; /* wait until data has been acknowledged */ | 
|  |  | 
|  | /* send queued data */ | 
|  | while ((skb = skb_dequeue(&dsp->sendq))) { | 
|  | /* in locked date, we must have still data in queue */ | 
|  | if (dsp->data_pending) { | 
|  | if (dsp_debug & DEBUG_DSP_CORE) | 
|  | printk(KERN_DEBUG "%s: fifo full %s, this is " | 
|  | "no bug!\n", __func__, dsp->name); | 
|  | /* flush transparent data, if not acked */ | 
|  | dev_kfree_skb(skb); | 
|  | continue; | 
|  | } | 
|  | hh = mISDN_HEAD_P(skb); | 
|  | if (hh->prim == DL_DATA_REQ) { | 
|  | /* send packet up */ | 
|  | if (dsp->up) { | 
|  | if (dsp->up->send(dsp->up, skb)) | 
|  | dev_kfree_skb(skb); | 
|  | } else | 
|  | dev_kfree_skb(skb); | 
|  | } else { | 
|  | /* send packet down */ | 
|  | if (dsp->ch.peer) { | 
|  | dsp->data_pending = 1; | 
|  | if (dsp->ch.recv(dsp->ch.peer, skb)) { | 
|  | dev_kfree_skb(skb); | 
|  | dsp->data_pending = 0; | 
|  | } | 
|  | } else | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | dspcreate(struct channel_req *crq) | 
|  | { | 
|  | struct dsp		*ndsp; | 
|  | u_long		flags; | 
|  |  | 
|  | if (crq->protocol != ISDN_P_B_L2DSP | 
|  | && crq->protocol != ISDN_P_B_L2DSPHDLC) | 
|  | return -EPROTONOSUPPORT; | 
|  | ndsp = vmalloc(sizeof(struct dsp)); | 
|  | if (!ndsp) { | 
|  | printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memset(ndsp, 0, sizeof(struct dsp)); | 
|  | if (dsp_debug & DEBUG_DSP_CTRL) | 
|  | printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__); | 
|  |  | 
|  | /* default enabled */ | 
|  | INIT_WORK(&ndsp->workq, (void *)dsp_send_bh); | 
|  | skb_queue_head_init(&ndsp->sendq); | 
|  | ndsp->ch.send = dsp_function; | 
|  | ndsp->ch.ctrl = dsp_ctrl; | 
|  | ndsp->up = crq->ch; | 
|  | crq->ch = &ndsp->ch; | 
|  | if (crq->protocol == ISDN_P_B_L2DSP) { | 
|  | crq->protocol = ISDN_P_B_RAW; | 
|  | ndsp->hdlc = 0; | 
|  | } else { | 
|  | crq->protocol = ISDN_P_B_HDLC; | 
|  | ndsp->hdlc = 1; | 
|  | } | 
|  | if (!try_module_get(THIS_MODULE)) | 
|  | printk(KERN_WARNING "%s:cannot get module\n", | 
|  | __func__); | 
|  |  | 
|  | sprintf(ndsp->name, "DSP_C%x(0x%p)", | 
|  | ndsp->up->st->dev->id + 1, ndsp); | 
|  | /* set frame size to start */ | 
|  | ndsp->features.hfc_id = -1; /* current PCM id */ | 
|  | ndsp->features.pcm_id = -1; /* current PCM id */ | 
|  | ndsp->pcm_slot_rx = -1; /* current CPM slot */ | 
|  | ndsp->pcm_slot_tx = -1; | 
|  | ndsp->pcm_bank_rx = -1; | 
|  | ndsp->pcm_bank_tx = -1; | 
|  | ndsp->hfc_conf = -1; /* current conference number */ | 
|  | /* set tone timer */ | 
|  | ndsp->tone.tl.function = (void *)dsp_tone_timeout; | 
|  | ndsp->tone.tl.data = (long) ndsp; | 
|  | init_timer(&ndsp->tone.tl); | 
|  |  | 
|  | if (dtmfthreshold < 20 || dtmfthreshold > 500) | 
|  | dtmfthreshold = 200; | 
|  | ndsp->dtmf.treshold = dtmfthreshold*10000; | 
|  |  | 
|  | /* init pipeline append to list */ | 
|  | spin_lock_irqsave(&dsp_lock, flags); | 
|  | dsp_pipeline_init(&ndsp->pipeline); | 
|  | list_add_tail(&ndsp->list, &dsp_ilist); | 
|  | spin_unlock_irqrestore(&dsp_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct Bprotocol DSP = { | 
|  | .Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK)) | 
|  | | (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)), | 
|  | .name = "dsp", | 
|  | .create = dspcreate | 
|  | }; | 
|  |  | 
|  | static int dsp_init(void) | 
|  | { | 
|  | int err; | 
|  | int tics; | 
|  |  | 
|  | printk(KERN_INFO "DSP modul %s\n", mISDN_dsp_revision); | 
|  |  | 
|  | dsp_options = options; | 
|  | dsp_debug = debug; | 
|  |  | 
|  | /* set packet size */ | 
|  | dsp_poll = poll; | 
|  | if (dsp_poll) { | 
|  | if (dsp_poll > MAX_POLL) { | 
|  | printk(KERN_ERR "%s: Wrong poll value (%d), use %d " | 
|  | "maximum.\n", __func__, poll, MAX_POLL); | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  | if (dsp_poll < 8) { | 
|  | printk(KERN_ERR "%s: Wrong poll value (%d), use 8 " | 
|  | "minimum.\n", __func__, dsp_poll); | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  | dsp_tics = poll * HZ / 8000; | 
|  | if (dsp_tics * 8000 != poll * HZ) { | 
|  | printk(KERN_INFO "mISDN_dsp: Cannot clock every %d " | 
|  | "samples (0,125 ms). It is not a multiple of " | 
|  | "%d HZ.\n", poll, HZ); | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  | } else { | 
|  | poll = 8; | 
|  | while (poll <= MAX_POLL) { | 
|  | tics = (poll * HZ) / 8000; | 
|  | if (tics * 8000 == poll * HZ) { | 
|  | dsp_tics = tics; | 
|  | dsp_poll = poll; | 
|  | if (poll >= 64) | 
|  | break; | 
|  | } | 
|  | poll++; | 
|  | } | 
|  | } | 
|  | if (dsp_poll == 0) { | 
|  | printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel " | 
|  | "clock that equals exactly the duration of 8-256 " | 
|  | "samples. (Choose kernel clock speed like 100, 250, " | 
|  | "300, 1000)\n"); | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  | printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals " | 
|  | "%d jiffies.\n", dsp_poll, dsp_tics); | 
|  |  | 
|  | spin_lock_init(&dsp_lock); | 
|  | INIT_LIST_HEAD(&dsp_ilist); | 
|  | INIT_LIST_HEAD(&conf_ilist); | 
|  |  | 
|  | /* init conversion tables */ | 
|  | dsp_audio_generate_law_tables(); | 
|  | dsp_silence = (dsp_options&DSP_OPT_ULAW)?0xff:0x2a; | 
|  | dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW)?dsp_audio_ulaw_to_s32: | 
|  | dsp_audio_alaw_to_s32; | 
|  | dsp_audio_generate_s2law_table(); | 
|  | dsp_audio_generate_seven(); | 
|  | dsp_audio_generate_mix_table(); | 
|  | if (dsp_options & DSP_OPT_ULAW) | 
|  | dsp_audio_generate_ulaw_samples(); | 
|  | dsp_audio_generate_volume_changes(); | 
|  |  | 
|  | err = dsp_pipeline_module_init(); | 
|  | if (err) { | 
|  | printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, " | 
|  | "error(%d)\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = mISDN_register_Bprotocol(&DSP); | 
|  | if (err) { | 
|  | printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* set sample timer */ | 
|  | dsp_spl_tl.function = (void *)dsp_cmx_send; | 
|  | dsp_spl_tl.data = 0; | 
|  | init_timer(&dsp_spl_tl); | 
|  | dsp_spl_tl.expires = jiffies + dsp_tics; | 
|  | dsp_spl_jiffies = dsp_spl_tl.expires; | 
|  | add_timer(&dsp_spl_tl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void dsp_cleanup(void) | 
|  | { | 
|  | mISDN_unregister_Bprotocol(&DSP); | 
|  |  | 
|  | if (timer_pending(&dsp_spl_tl)) | 
|  | del_timer(&dsp_spl_tl); | 
|  |  | 
|  | if (!list_empty(&dsp_ilist)) { | 
|  | printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not " | 
|  | "empty.\n"); | 
|  | } | 
|  | if (!list_empty(&conf_ilist)) { | 
|  | printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not " | 
|  | "all memory freed.\n"); | 
|  | } | 
|  |  | 
|  | dsp_pipeline_module_exit(); | 
|  | } | 
|  |  | 
|  | module_init(dsp_init); | 
|  | module_exit(dsp_cleanup); | 
|  |  |