|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Device driver for the the HMC5843 multi-chip module designed | 
|  | * for low field magnetic sensing. | 
|  | * | 
|  | * Copyright (C) 2010 Texas Instruments | 
|  | * | 
|  | * Author: Shubhrajyoti Datta <[email protected]> | 
|  | * Acknowledgment: Jonathan Cameron <[email protected]> for valuable inputs. | 
|  | * Support for HMC5883 and HMC5883L by Peter Meerwald <[email protected]>. | 
|  | * Split to multiple files by Josef Gajdusek <[email protected]> - 2014 | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/sysfs.h> | 
|  | #include <linux/iio/trigger_consumer.h> | 
|  | #include <linux/iio/buffer.h> | 
|  | #include <linux/iio/triggered_buffer.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include "hmc5843.h" | 
|  |  | 
|  | /* | 
|  | * Range gain settings in (+-)Ga | 
|  | * Beware: HMC5843 and HMC5883 have different recommended sensor field | 
|  | * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively | 
|  | */ | 
|  | #define HMC5843_RANGE_GAIN_OFFSET		0x05 | 
|  | #define HMC5843_RANGE_GAIN_DEFAULT		0x01 | 
|  | #define HMC5843_RANGE_GAIN_MASK		0xe0 | 
|  |  | 
|  | /* Device status */ | 
|  | #define HMC5843_DATA_READY			0x01 | 
|  | #define HMC5843_DATA_OUTPUT_LOCK		0x02 | 
|  |  | 
|  | /* Mode register configuration */ | 
|  | #define HMC5843_MODE_CONVERSION_CONTINUOUS	0x00 | 
|  | #define HMC5843_MODE_CONVERSION_SINGLE		0x01 | 
|  | #define HMC5843_MODE_IDLE			0x02 | 
|  | #define HMC5843_MODE_SLEEP			0x03 | 
|  | #define HMC5843_MODE_MASK			0x03 | 
|  |  | 
|  | /* | 
|  | * HMC5843: Minimum data output rate | 
|  | * HMC5883: Typical data output rate | 
|  | */ | 
|  | #define HMC5843_RATE_OFFSET			0x02 | 
|  | #define HMC5843_RATE_DEFAULT			0x04 | 
|  | #define HMC5843_RATE_MASK		0x1c | 
|  |  | 
|  | /* Device measurement configuration */ | 
|  | #define HMC5843_MEAS_CONF_NORMAL		0x00 | 
|  | #define HMC5843_MEAS_CONF_POSITIVE_BIAS		0x01 | 
|  | #define HMC5843_MEAS_CONF_NEGATIVE_BIAS		0x02 | 
|  | #define HMC5843_MEAS_CONF_MASK			0x03 | 
|  |  | 
|  | /* | 
|  | * API for setting the measurement configuration to | 
|  | * Normal, Positive bias and Negative bias | 
|  | * | 
|  | * From the datasheet: | 
|  | * 0 - Normal measurement configuration (default): In normal measurement | 
|  | *     configuration the device follows normal measurement flow. Pins BP | 
|  | *     and BN are left floating and high impedance. | 
|  | * | 
|  | * 1 - Positive bias configuration: In positive bias configuration, a | 
|  | *     positive current is forced across the resistive load on pins BP | 
|  | *     and BN. | 
|  | * | 
|  | * 2 - Negative bias configuration. In negative bias configuration, a | 
|  | *     negative current is forced across the resistive load on pins BP | 
|  | *     and BN. | 
|  | * | 
|  | * 3 - Only available on HMC5983. Magnetic sensor is disabled. | 
|  | *     Temperature sensor is enabled. | 
|  | */ | 
|  |  | 
|  | static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias", | 
|  | "negativebias"}; | 
|  |  | 
|  | static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias", | 
|  | "negativebias", | 
|  | "disabled"}; | 
|  | /* Scaling factors: 10000000/Gain */ | 
|  | static const int hmc5843_regval_to_nanoscale[] = { | 
|  | 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 | 
|  | }; | 
|  |  | 
|  | static const int hmc5883_regval_to_nanoscale[] = { | 
|  | 7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662 | 
|  | }; | 
|  |  | 
|  | static const int hmc5883l_regval_to_nanoscale[] = { | 
|  | 7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478 | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * From the datasheet: | 
|  | * Value	| HMC5843		| HMC5883/HMC5883L | 
|  | *		| Data output rate (Hz)	| Data output rate (Hz) | 
|  | * 0		| 0.5			| 0.75 | 
|  | * 1		| 1			| 1.5 | 
|  | * 2		| 2			| 3 | 
|  | * 3		| 5			| 7.5 | 
|  | * 4		| 10 (default)		| 15 | 
|  | * 5		| 20			| 30 | 
|  | * 6		| 50			| 75 | 
|  | * 7		| Not used		| Not used | 
|  | */ | 
|  | static const int hmc5843_regval_to_samp_freq[][2] = { | 
|  | {0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0} | 
|  | }; | 
|  |  | 
|  | static const int hmc5883_regval_to_samp_freq[][2] = { | 
|  | {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, | 
|  | {75, 0} | 
|  | }; | 
|  |  | 
|  | static const int hmc5983_regval_to_samp_freq[][2] = { | 
|  | {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, | 
|  | {75, 0}, {220, 0} | 
|  | }; | 
|  |  | 
|  | /* Describe chip variants */ | 
|  | struct hmc5843_chip_info { | 
|  | const struct iio_chan_spec *channels; | 
|  | const int (*regval_to_samp_freq)[2]; | 
|  | const int n_regval_to_samp_freq; | 
|  | const int *regval_to_nanoscale; | 
|  | const int n_regval_to_nanoscale; | 
|  | }; | 
|  |  | 
|  | /* The lower two bits contain the current conversion mode */ | 
|  | static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG, | 
|  | HMC5843_MODE_MASK, operating_mode); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int hmc5843_wait_measurement(struct hmc5843_data *data) | 
|  | { | 
|  | int tries = 150; | 
|  | unsigned int val; | 
|  | int ret; | 
|  |  | 
|  | while (tries-- > 0) { | 
|  | ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (val & HMC5843_DATA_READY) | 
|  | break; | 
|  | msleep(20); | 
|  | } | 
|  |  | 
|  | if (tries < 0) { | 
|  | dev_err(data->dev, "data not ready\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Return the measurement value from the specified channel */ | 
|  | static int hmc5843_read_measurement(struct hmc5843_data *data, | 
|  | int idx, int *val) | 
|  | { | 
|  | __be16 values[3]; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = hmc5843_wait_measurement(data); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&data->lock); | 
|  | return ret; | 
|  | } | 
|  | ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, | 
|  | values, sizeof(values)); | 
|  | mutex_unlock(&data->lock); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | *val = sign_extend32(be16_to_cpu(values[idx]), 15); | 
|  | return IIO_VAL_INT; | 
|  | } | 
|  |  | 
|  | static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, | 
|  | HMC5843_MEAS_CONF_MASK, meas_conf); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static | 
|  | int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev, | 
|  | const struct iio_chan_spec *chan) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  | unsigned int val; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return val & HMC5843_MEAS_CONF_MASK; | 
|  | } | 
|  |  | 
|  | static | 
|  | int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev, | 
|  | const struct iio_chan_spec *chan, | 
|  | unsigned int meas_conf) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  |  | 
|  | return hmc5843_set_meas_conf(data, meas_conf); | 
|  | } | 
|  |  | 
|  | static const struct iio_mount_matrix * | 
|  | hmc5843_get_mount_matrix(const struct iio_dev *indio_dev, | 
|  | const struct iio_chan_spec *chan) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  |  | 
|  | return &data->orientation; | 
|  | } | 
|  |  | 
|  | static const struct iio_enum hmc5843_meas_conf_enum = { | 
|  | .items = hmc5843_meas_conf_modes, | 
|  | .num_items = ARRAY_SIZE(hmc5843_meas_conf_modes), | 
|  | .get = hmc5843_show_measurement_configuration, | 
|  | .set = hmc5843_set_measurement_configuration, | 
|  | }; | 
|  |  | 
|  | static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = { | 
|  | IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5843_meas_conf_enum), | 
|  | IIO_ENUM_AVAILABLE("meas_conf", &hmc5843_meas_conf_enum), | 
|  | IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix), | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static const struct iio_enum hmc5983_meas_conf_enum = { | 
|  | .items = hmc5983_meas_conf_modes, | 
|  | .num_items = ARRAY_SIZE(hmc5983_meas_conf_modes), | 
|  | .get = hmc5843_show_measurement_configuration, | 
|  | .set = hmc5843_set_measurement_configuration, | 
|  | }; | 
|  |  | 
|  | static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = { | 
|  | IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5983_meas_conf_enum), | 
|  | IIO_ENUM_AVAILABLE("meas_conf", &hmc5983_meas_conf_enum), | 
|  | IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix), | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static | 
|  | ssize_t hmc5843_show_samp_freq_avail(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); | 
|  | size_t len = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) | 
|  | len += scnprintf(buf + len, PAGE_SIZE - len, | 
|  | "%d.%d ", data->variant->regval_to_samp_freq[i][0], | 
|  | data->variant->regval_to_samp_freq[i][1]); | 
|  |  | 
|  | /* replace trailing space by newline */ | 
|  | buf[len - 1] = '\n'; | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail); | 
|  |  | 
|  | static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, | 
|  | HMC5843_RATE_MASK, | 
|  | rate << HMC5843_RATE_OFFSET); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int hmc5843_get_samp_freq_index(struct hmc5843_data *data, | 
|  | int val, int val2) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) | 
|  | if (val == data->variant->regval_to_samp_freq[i][0] && | 
|  | val2 == data->variant->regval_to_samp_freq[i][1]) | 
|  | return i; | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B, | 
|  | HMC5843_RANGE_GAIN_MASK, | 
|  | range << HMC5843_RANGE_GAIN_OFFSET); | 
|  | mutex_unlock(&data->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t hmc5843_show_scale_avail(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); | 
|  |  | 
|  | size_t len = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) | 
|  | len += scnprintf(buf + len, PAGE_SIZE - len, | 
|  | "0.%09d ", data->variant->regval_to_nanoscale[i]); | 
|  |  | 
|  | /* replace trailing space by newline */ | 
|  | buf[len - 1] = '\n'; | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static IIO_DEVICE_ATTR(scale_available, S_IRUGO, | 
|  | hmc5843_show_scale_avail, NULL, 0); | 
|  |  | 
|  | static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (val) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) | 
|  | if (val2 == data->variant->regval_to_nanoscale[i]) | 
|  | return i; | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int hmc5843_read_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int *val, int *val2, long mask) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  | unsigned int rval; | 
|  | int ret; | 
|  |  | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_RAW: | 
|  | return hmc5843_read_measurement(data, chan->scan_index, val); | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | rval >>= HMC5843_RANGE_GAIN_OFFSET; | 
|  | *val = 0; | 
|  | *val2 = data->variant->regval_to_nanoscale[rval]; | 
|  | return IIO_VAL_INT_PLUS_NANO; | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | rval >>= HMC5843_RATE_OFFSET; | 
|  | *val = data->variant->regval_to_samp_freq[rval][0]; | 
|  | *val2 = data->variant->regval_to_samp_freq[rval][1]; | 
|  | return IIO_VAL_INT_PLUS_MICRO; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int hmc5843_write_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int val, int val2, long mask) | 
|  | { | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  | int rate, range; | 
|  |  | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | rate = hmc5843_get_samp_freq_index(data, val, val2); | 
|  | if (rate < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | return hmc5843_set_samp_freq(data, rate); | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | range = hmc5843_get_scale_index(data, val, val2); | 
|  | if (range < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | return hmc5843_set_range_gain(data, range); | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | long mask) | 
|  | { | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_SAMP_FREQ: | 
|  | return IIO_VAL_INT_PLUS_MICRO; | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | return IIO_VAL_INT_PLUS_NANO; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t hmc5843_trigger_handler(int irq, void *p) | 
|  | { | 
|  | struct iio_poll_func *pf = p; | 
|  | struct iio_dev *indio_dev = pf->indio_dev; | 
|  | struct hmc5843_data *data = iio_priv(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->lock); | 
|  | ret = hmc5843_wait_measurement(data); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&data->lock); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, | 
|  | data->buffer, 3 * sizeof(__be16)); | 
|  |  | 
|  | mutex_unlock(&data->lock); | 
|  | if (ret < 0) | 
|  | goto done; | 
|  |  | 
|  | iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, | 
|  | iio_get_time_ns(indio_dev)); | 
|  |  | 
|  | done: | 
|  | iio_trigger_notify_done(indio_dev->trig); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | #define HMC5843_CHANNEL(axis, idx)					\ | 
|  | {								\ | 
|  | .type = IIO_MAGN,					\ | 
|  | .modified = 1,						\ | 
|  | .channel2 = IIO_MOD_##axis,				\ | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\ | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\ | 
|  | BIT(IIO_CHAN_INFO_SAMP_FREQ),			\ | 
|  | .scan_index = idx,					\ | 
|  | .scan_type = {						\ | 
|  | .sign = 's',					\ | 
|  | .realbits = 16,					\ | 
|  | .storagebits = 16,				\ | 
|  | .endianness = IIO_BE,				\ | 
|  | },							\ | 
|  | .ext_info = hmc5843_ext_info,	\ | 
|  | } | 
|  |  | 
|  | #define HMC5983_CHANNEL(axis, idx)					\ | 
|  | {								\ | 
|  | .type = IIO_MAGN,					\ | 
|  | .modified = 1,						\ | 
|  | .channel2 = IIO_MOD_##axis,				\ | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\ | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\ | 
|  | BIT(IIO_CHAN_INFO_SAMP_FREQ),			\ | 
|  | .scan_index = idx,					\ | 
|  | .scan_type = {						\ | 
|  | .sign = 's',					\ | 
|  | .realbits = 16,					\ | 
|  | .storagebits = 16,				\ | 
|  | .endianness = IIO_BE,				\ | 
|  | },							\ | 
|  | .ext_info = hmc5983_ext_info,	\ | 
|  | } | 
|  |  | 
|  | static const struct iio_chan_spec hmc5843_channels[] = { | 
|  | HMC5843_CHANNEL(X, 0), | 
|  | HMC5843_CHANNEL(Y, 1), | 
|  | HMC5843_CHANNEL(Z, 2), | 
|  | IIO_CHAN_SOFT_TIMESTAMP(3), | 
|  | }; | 
|  |  | 
|  | /* Beware: Y and Z are exchanged on HMC5883 and 5983 */ | 
|  | static const struct iio_chan_spec hmc5883_channels[] = { | 
|  | HMC5843_CHANNEL(X, 0), | 
|  | HMC5843_CHANNEL(Z, 1), | 
|  | HMC5843_CHANNEL(Y, 2), | 
|  | IIO_CHAN_SOFT_TIMESTAMP(3), | 
|  | }; | 
|  |  | 
|  | static const struct iio_chan_spec hmc5983_channels[] = { | 
|  | HMC5983_CHANNEL(X, 0), | 
|  | HMC5983_CHANNEL(Z, 1), | 
|  | HMC5983_CHANNEL(Y, 2), | 
|  | IIO_CHAN_SOFT_TIMESTAMP(3), | 
|  | }; | 
|  |  | 
|  | static struct attribute *hmc5843_attributes[] = { | 
|  | &iio_dev_attr_scale_available.dev_attr.attr, | 
|  | &iio_dev_attr_sampling_frequency_available.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group hmc5843_group = { | 
|  | .attrs = hmc5843_attributes, | 
|  | }; | 
|  |  | 
|  | static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = { | 
|  | [HMC5843_ID] = { | 
|  | .channels = hmc5843_channels, | 
|  | .regval_to_samp_freq = hmc5843_regval_to_samp_freq, | 
|  | .n_regval_to_samp_freq = | 
|  | ARRAY_SIZE(hmc5843_regval_to_samp_freq), | 
|  | .regval_to_nanoscale = hmc5843_regval_to_nanoscale, | 
|  | .n_regval_to_nanoscale = | 
|  | ARRAY_SIZE(hmc5843_regval_to_nanoscale), | 
|  | }, | 
|  | [HMC5883_ID] = { | 
|  | .channels = hmc5883_channels, | 
|  | .regval_to_samp_freq = hmc5883_regval_to_samp_freq, | 
|  | .n_regval_to_samp_freq = | 
|  | ARRAY_SIZE(hmc5883_regval_to_samp_freq), | 
|  | .regval_to_nanoscale = hmc5883_regval_to_nanoscale, | 
|  | .n_regval_to_nanoscale = | 
|  | ARRAY_SIZE(hmc5883_regval_to_nanoscale), | 
|  | }, | 
|  | [HMC5883L_ID] = { | 
|  | .channels = hmc5883_channels, | 
|  | .regval_to_samp_freq = hmc5883_regval_to_samp_freq, | 
|  | .n_regval_to_samp_freq = | 
|  | ARRAY_SIZE(hmc5883_regval_to_samp_freq), | 
|  | .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, | 
|  | .n_regval_to_nanoscale = | 
|  | ARRAY_SIZE(hmc5883l_regval_to_nanoscale), | 
|  | }, | 
|  | [HMC5983_ID] = { | 
|  | .channels = hmc5983_channels, | 
|  | .regval_to_samp_freq = hmc5983_regval_to_samp_freq, | 
|  | .n_regval_to_samp_freq = | 
|  | ARRAY_SIZE(hmc5983_regval_to_samp_freq), | 
|  | .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, | 
|  | .n_regval_to_nanoscale = | 
|  | ARRAY_SIZE(hmc5883l_regval_to_nanoscale), | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int hmc5843_init(struct hmc5843_data *data) | 
|  | { | 
|  | int ret; | 
|  | u8 id[3]; | 
|  |  | 
|  | ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG, | 
|  | id, ARRAY_SIZE(id)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (id[0] != 'H' || id[1] != '4' || id[2] != '3') { | 
|  | dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS); | 
|  | } | 
|  |  | 
|  | static const struct iio_info hmc5843_info = { | 
|  | .attrs = &hmc5843_group, | 
|  | .read_raw = &hmc5843_read_raw, | 
|  | .write_raw = &hmc5843_write_raw, | 
|  | .write_raw_get_fmt = &hmc5843_write_raw_get_fmt, | 
|  | }; | 
|  |  | 
|  | static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; | 
|  |  | 
|  | int hmc5843_common_suspend(struct device *dev) | 
|  | { | 
|  | return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), | 
|  | HMC5843_MODE_SLEEP); | 
|  | } | 
|  | EXPORT_SYMBOL(hmc5843_common_suspend); | 
|  |  | 
|  | int hmc5843_common_resume(struct device *dev) | 
|  | { | 
|  | return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), | 
|  | HMC5843_MODE_CONVERSION_CONTINUOUS); | 
|  | } | 
|  | EXPORT_SYMBOL(hmc5843_common_resume); | 
|  |  | 
|  | int hmc5843_common_probe(struct device *dev, struct regmap *regmap, | 
|  | enum hmc5843_ids id, const char *name) | 
|  | { | 
|  | struct hmc5843_data *data; | 
|  | struct iio_dev *indio_dev; | 
|  | int ret; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); | 
|  | if (!indio_dev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dev_set_drvdata(dev, indio_dev); | 
|  |  | 
|  | /* default settings at probe */ | 
|  | data = iio_priv(indio_dev); | 
|  | data->dev = dev; | 
|  | data->regmap = regmap; | 
|  | data->variant = &hmc5843_chip_info_tbl[id]; | 
|  | mutex_init(&data->lock); | 
|  |  | 
|  | ret = iio_read_mount_matrix(dev, "mount-matrix", | 
|  | &data->orientation); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | indio_dev->name = name; | 
|  | indio_dev->info = &hmc5843_info; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  | indio_dev->channels = data->variant->channels; | 
|  | indio_dev->num_channels = 4; | 
|  | indio_dev->available_scan_masks = hmc5843_scan_masks; | 
|  |  | 
|  | ret = hmc5843_init(data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = iio_triggered_buffer_setup(indio_dev, NULL, | 
|  | hmc5843_trigger_handler, NULL); | 
|  | if (ret < 0) | 
|  | goto buffer_setup_err; | 
|  |  | 
|  | ret = iio_device_register(indio_dev); | 
|  | if (ret < 0) | 
|  | goto buffer_cleanup; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | buffer_cleanup: | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  | buffer_setup_err: | 
|  | hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(hmc5843_common_probe); | 
|  |  | 
|  | int hmc5843_common_remove(struct device *dev) | 
|  | { | 
|  | struct iio_dev *indio_dev = dev_get_drvdata(dev); | 
|  |  | 
|  | iio_device_unregister(indio_dev); | 
|  | iio_triggered_buffer_cleanup(indio_dev); | 
|  |  | 
|  | /*  sleep mode to save power */ | 
|  | hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hmc5843_common_remove); | 
|  |  | 
|  | MODULE_AUTHOR("Shubhrajyoti Datta <[email protected]>"); | 
|  | MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver"); | 
|  | MODULE_LICENSE("GPL"); |