|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Driver for Texas Instruments / National Semiconductor LM95234 | 
|  | * | 
|  | * Copyright (c) 2013, 2014 Guenter Roeck <[email protected]> | 
|  | * | 
|  | * Derived from lm95241.c | 
|  | * Copyright (C) 2008, 2010 Davide Rizzo <[email protected]> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/sysfs.h> | 
|  |  | 
|  | #define DRVNAME "lm95234" | 
|  |  | 
|  | enum chips { lm95233, lm95234 }; | 
|  |  | 
|  | static const unsigned short normal_i2c[] = { | 
|  | 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END }; | 
|  |  | 
|  | /* LM95234 registers */ | 
|  | #define LM95234_REG_MAN_ID		0xFE | 
|  | #define LM95234_REG_CHIP_ID		0xFF | 
|  | #define LM95234_REG_STATUS		0x02 | 
|  | #define LM95234_REG_CONFIG		0x03 | 
|  | #define LM95234_REG_CONVRATE		0x04 | 
|  | #define LM95234_REG_STS_FAULT		0x07 | 
|  | #define LM95234_REG_STS_TCRIT1		0x08 | 
|  | #define LM95234_REG_STS_TCRIT2		0x09 | 
|  | #define LM95234_REG_TEMPH(x)		((x) + 0x10) | 
|  | #define LM95234_REG_TEMPL(x)		((x) + 0x20) | 
|  | #define LM95234_REG_UTEMPH(x)		((x) + 0x19)	/* Remote only */ | 
|  | #define LM95234_REG_UTEMPL(x)		((x) + 0x29) | 
|  | #define LM95234_REG_REM_MODEL		0x30 | 
|  | #define LM95234_REG_REM_MODEL_STS	0x38 | 
|  | #define LM95234_REG_OFFSET(x)		((x) + 0x31)	/* Remote only */ | 
|  | #define LM95234_REG_TCRIT1(x)		((x) + 0x40) | 
|  | #define LM95234_REG_TCRIT2(x)		((x) + 0x49)	/* Remote channel 1,2 */ | 
|  | #define LM95234_REG_TCRIT_HYST		0x5a | 
|  |  | 
|  | #define NATSEMI_MAN_ID			0x01 | 
|  | #define LM95233_CHIP_ID			0x89 | 
|  | #define LM95234_CHIP_ID			0x79 | 
|  |  | 
|  | /* Client data (each client gets its own) */ | 
|  | struct lm95234_data { | 
|  | struct i2c_client *client; | 
|  | const struct attribute_group *groups[3]; | 
|  | struct mutex update_lock; | 
|  | unsigned long last_updated, interval;	/* in jiffies */ | 
|  | bool valid;		/* false until following fields are valid */ | 
|  | /* registers values */ | 
|  | int temp[5];		/* temperature (signed) */ | 
|  | u32 status;		/* fault/alarm status */ | 
|  | u8 tcrit1[5];		/* critical temperature limit */ | 
|  | u8 tcrit2[2];		/* high temperature limit */ | 
|  | s8 toffset[4];		/* remote temperature offset */ | 
|  | u8 thyst;		/* common hysteresis */ | 
|  |  | 
|  | u8 sensor_type;		/* temperature sensor type */ | 
|  | }; | 
|  |  | 
|  | static int lm95234_read_temp(struct i2c_client *client, int index, int *t) | 
|  | { | 
|  | int val; | 
|  | u16 temp = 0; | 
|  |  | 
|  | if (index) { | 
|  | val = i2c_smbus_read_byte_data(client, | 
|  | LM95234_REG_UTEMPH(index - 1)); | 
|  | if (val < 0) | 
|  | return val; | 
|  | temp = val << 8; | 
|  | val = i2c_smbus_read_byte_data(client, | 
|  | LM95234_REG_UTEMPL(index - 1)); | 
|  | if (val < 0) | 
|  | return val; | 
|  | temp |= val; | 
|  | *t = temp; | 
|  | } | 
|  | /* | 
|  | * Read signed temperature if unsigned temperature is 0, | 
|  | * or if this is the local sensor. | 
|  | */ | 
|  | if (!temp) { | 
|  | val = i2c_smbus_read_byte_data(client, | 
|  | LM95234_REG_TEMPH(index)); | 
|  | if (val < 0) | 
|  | return val; | 
|  | temp = val << 8; | 
|  | val = i2c_smbus_read_byte_data(client, | 
|  | LM95234_REG_TEMPL(index)); | 
|  | if (val < 0) | 
|  | return val; | 
|  | temp |= val; | 
|  | *t = (s16)temp; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 update_intervals[] = { 143, 364, 1000, 2500 }; | 
|  |  | 
|  | /* Fill value cache. Must be called with update lock held. */ | 
|  |  | 
|  | static int lm95234_fill_cache(struct lm95234_data *data, | 
|  | struct i2c_client *client) | 
|  | { | 
|  | int i, ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) { | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | data->tcrit1[i] = ret; | 
|  | } | 
|  | for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) { | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | data->tcrit2[i] = ret; | 
|  | } | 
|  | for (i = 0; i < ARRAY_SIZE(data->toffset); i++) { | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | data->toffset[i] = ret; | 
|  | } | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | data->thyst = ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | data->sensor_type = ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lm95234_update_device(struct lm95234_data *data) | 
|  | { | 
|  | struct i2c_client *client = data->client; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | if (time_after(jiffies, data->last_updated + data->interval) || | 
|  | !data->valid) { | 
|  | int i; | 
|  |  | 
|  | if (!data->valid) { | 
|  | ret = lm95234_fill_cache(data, client); | 
|  | if (ret < 0) | 
|  | goto abort; | 
|  | } | 
|  |  | 
|  | data->valid = false; | 
|  | for (i = 0; i < ARRAY_SIZE(data->temp); i++) { | 
|  | ret = lm95234_read_temp(client, i, &data->temp[i]); | 
|  | if (ret < 0) | 
|  | goto abort; | 
|  | } | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT); | 
|  | if (ret < 0) | 
|  | goto abort; | 
|  | data->status = ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1); | 
|  | if (ret < 0) | 
|  | goto abort; | 
|  | data->status |= ret << 8; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2); | 
|  | if (ret < 0) | 
|  | goto abort; | 
|  | data->status |= ret << 16; | 
|  |  | 
|  | data->last_updated = jiffies; | 
|  | data->valid = true; | 
|  | } | 
|  | ret = 0; | 
|  | abort: | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t temp_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", | 
|  | DIV_ROUND_CLOSEST(data->temp[index] * 125, 32)); | 
|  | } | 
|  |  | 
|  | static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | u32 mask = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%u", !!(data->status & mask)); | 
|  | } | 
|  |  | 
|  | static ssize_t type_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | u8 mask = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t type_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | unsigned long val; | 
|  | u8 mask = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtoul(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (val != 1 && val != 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | if (val == 1) | 
|  | data->sensor_type |= mask; | 
|  | else | 
|  | data->sensor_type &= ~mask; | 
|  | data->valid = false; | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_REM_MODEL, | 
|  | data->sensor_type); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit2_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%u", data->tcrit2[index] * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit2_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | long val; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtol(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->tcrit2[index] = val; | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT2(index), val); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit2_hyst_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Result can be negative, so be careful with unsigned operands */ | 
|  | return sprintf(buf, "%d", | 
|  | ((int)data->tcrit2[index] - (int)data->thyst) * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit1_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  |  | 
|  | return sprintf(buf, "%u", data->tcrit1[index] * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit1_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  | long val; | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtol(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->tcrit1[index] = val; | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT1(index), val); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit1_hyst_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Result can be negative, so be careful with unsigned operands */ | 
|  | return sprintf(buf, "%d", | 
|  | ((int)data->tcrit1[index] - (int)data->thyst) * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t tcrit1_hyst_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  | long val; | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtol(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = DIV_ROUND_CLOSEST(val, 1000); | 
|  | val = clamp_val((int)data->tcrit1[index] - val, 0, 31); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->thyst = val; | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT_HYST, val); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t offset_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d", data->toffset[index] * 500); | 
|  | } | 
|  |  | 
|  | static ssize_t offset_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int index = to_sensor_dev_attr(attr)->index; | 
|  | int ret = lm95234_update_device(data); | 
|  | long val; | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtol(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Accuracy is 1/2 degrees C */ | 
|  | val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->toffset[index] = val; | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_OFFSET(index), val); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t update_interval_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int ret = lm95234_update_device(data); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%lu\n", | 
|  | DIV_ROUND_CLOSEST(data->interval * 1000, HZ)); | 
|  | } | 
|  |  | 
|  | static ssize_t update_interval_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct lm95234_data *data = dev_get_drvdata(dev); | 
|  | int ret = lm95234_update_device(data); | 
|  | unsigned long val; | 
|  | u8 regval; | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = kstrtoul(buf, 10, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | for (regval = 0; regval < 3; regval++) { | 
|  | if (val <= update_intervals[regval]) | 
|  | break; | 
|  | } | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->interval = msecs_to_jiffies(update_intervals[regval]); | 
|  | i2c_smbus_write_byte_data(data->client, LM95234_REG_CONVRATE, regval); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, BIT(0) | BIT(1)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, BIT(2) | BIT(3)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp4_fault, alarm, BIT(4) | BIT(5)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp5_fault, alarm, BIT(6) | BIT(7)); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_type, type, BIT(1)); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp3_type, type, BIT(2)); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp4_type, type, BIT(3)); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp5_type, type, BIT(4)); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(temp1_max, tcrit1, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_max, tcrit2, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp3_max, tcrit2, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp4_max, tcrit1, 3); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp5_max, tcrit1, 4); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, tcrit1_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, tcrit2_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, tcrit2_hyst, 1); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, tcrit1_hyst, 3); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp5_max_hyst, tcrit1_hyst, 4); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, BIT(0 + 8)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, BIT(1 + 16)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, BIT(2 + 16)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, alarm, BIT(3 + 8)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp5_max_alarm, alarm, BIT(4 + 8)); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_crit, tcrit1, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp3_crit, tcrit1, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, tcrit1_hyst, 1); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, tcrit1_hyst, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, BIT(1 + 8)); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, BIT(2 + 8)); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 2); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 3); | 
|  |  | 
|  | static DEVICE_ATTR_RW(update_interval); | 
|  |  | 
|  | static struct attribute *lm95234_common_attrs[] = { | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_fault.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_fault.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_crit.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_offset.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_offset.dev_attr.attr, | 
|  | &dev_attr_update_interval.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lm95234_common_group = { | 
|  | .attrs = lm95234_common_attrs, | 
|  | }; | 
|  |  | 
|  | static struct attribute *lm95234_attrs[] = { | 
|  | &sensor_dev_attr_temp4_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_fault.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_fault.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp4_offset.dev_attr.attr, | 
|  | &sensor_dev_attr_temp5_offset.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lm95234_group = { | 
|  | .attrs = lm95234_attrs, | 
|  | }; | 
|  |  | 
|  | static int lm95234_detect(struct i2c_client *client, | 
|  | struct i2c_board_info *info) | 
|  | { | 
|  | struct i2c_adapter *adapter = client->adapter; | 
|  | int address = client->addr; | 
|  | u8 config_mask, model_mask; | 
|  | int mfg_id, chip_id, val; | 
|  | const char *name; | 
|  |  | 
|  | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID); | 
|  | if (mfg_id != NATSEMI_MAN_ID) | 
|  | return -ENODEV; | 
|  |  | 
|  | chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID); | 
|  | switch (chip_id) { | 
|  | case LM95233_CHIP_ID: | 
|  | if (address != 0x18 && address != 0x2a && address != 0x2b) | 
|  | return -ENODEV; | 
|  | config_mask = 0xbf; | 
|  | model_mask = 0xf9; | 
|  | name = "lm95233"; | 
|  | break; | 
|  | case LM95234_CHIP_ID: | 
|  | if (address != 0x18 && address != 0x4d && address != 0x4e) | 
|  | return -ENODEV; | 
|  | config_mask = 0xbc; | 
|  | model_mask = 0xe1; | 
|  | name = "lm95234"; | 
|  | break; | 
|  | default: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS); | 
|  | if (val & 0x30) | 
|  | return -ENODEV; | 
|  |  | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); | 
|  | if (val & config_mask) | 
|  | return -ENODEV; | 
|  |  | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); | 
|  | if (val & 0xfc) | 
|  | return -ENODEV; | 
|  |  | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | 
|  | if (val & model_mask) | 
|  | return -ENODEV; | 
|  |  | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); | 
|  | if (val & model_mask) | 
|  | return -ENODEV; | 
|  |  | 
|  | strlcpy(info->type, name, I2C_NAME_SIZE); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lm95234_init_client(struct i2c_client *client) | 
|  | { | 
|  | int val, model; | 
|  |  | 
|  | /* start conversion if necessary */ | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); | 
|  | if (val < 0) | 
|  | return val; | 
|  | if (val & 0x40) | 
|  | i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG, | 
|  | val & ~0x40); | 
|  |  | 
|  | /* If diode type status reports an error, try to fix it */ | 
|  | val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); | 
|  | if (val < 0) | 
|  | return val; | 
|  | model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); | 
|  | if (model < 0) | 
|  | return model; | 
|  | if (model & val) { | 
|  | dev_notice(&client->dev, | 
|  | "Fixing remote diode type misconfiguration (0x%x)\n", | 
|  | val); | 
|  | i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL, | 
|  | model & ~val); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id lm95234_id[]; | 
|  |  | 
|  | static int lm95234_probe(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct lm95234_data *data; | 
|  | struct device *hwmon_dev; | 
|  | int err; | 
|  |  | 
|  | data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data->client = client; | 
|  | mutex_init(&data->update_lock); | 
|  |  | 
|  | /* Initialize the LM95234 chip */ | 
|  | err = lm95234_init_client(client); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | data->groups[0] = &lm95234_common_group; | 
|  | if (i2c_match_id(lm95234_id, client)->driver_data == lm95234) | 
|  | data->groups[1] = &lm95234_group; | 
|  |  | 
|  | hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, | 
|  | data, data->groups); | 
|  | return PTR_ERR_OR_ZERO(hwmon_dev); | 
|  | } | 
|  |  | 
|  | /* Driver data (common to all clients) */ | 
|  | static const struct i2c_device_id lm95234_id[] = { | 
|  | { "lm95233", lm95233 }, | 
|  | { "lm95234", lm95234 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, lm95234_id); | 
|  |  | 
|  | static struct i2c_driver lm95234_driver = { | 
|  | .class		= I2C_CLASS_HWMON, | 
|  | .driver = { | 
|  | .name	= DRVNAME, | 
|  | }, | 
|  | .probe_new	= lm95234_probe, | 
|  | .id_table	= lm95234_id, | 
|  | .detect		= lm95234_detect, | 
|  | .address_list	= normal_i2c, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(lm95234_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Guenter Roeck <[email protected]>"); | 
|  | MODULE_DESCRIPTION("LM95233/LM95234 sensor driver"); | 
|  | MODULE_LICENSE("GPL"); |