|  | /* | 
|  | * Block driver for media (i.e., flash cards) | 
|  | * | 
|  | * Copyright 2002 Hewlett-Packard Company | 
|  | * Copyright 2005-2008 Pierre Ossman | 
|  | * | 
|  | * Use consistent with the GNU GPL is permitted, | 
|  | * provided that this copyright notice is | 
|  | * preserved in its entirety in all copies and derived works. | 
|  | * | 
|  | * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, | 
|  | * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS | 
|  | * FITNESS FOR ANY PARTICULAR PURPOSE. | 
|  | * | 
|  | * Many thanks to Alessandro Rubini and Jonathan Corbet! | 
|  | * | 
|  | * Author:  Andrew Christian | 
|  | *          28 May 2002 | 
|  | */ | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/hdreg.h> | 
|  | #include <linux/kdev_t.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/cdev.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/scatterlist.h> | 
|  | #include <linux/string_helpers.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/compat.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/debugfs.h> | 
|  |  | 
|  | #include <linux/mmc/ioctl.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/mmc.h> | 
|  | #include <linux/mmc/sd.h> | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  |  | 
|  | #include "queue.h" | 
|  | #include "block.h" | 
|  | #include "core.h" | 
|  | #include "card.h" | 
|  | #include "host.h" | 
|  | #include "bus.h" | 
|  | #include "mmc_ops.h" | 
|  | #include "quirks.h" | 
|  | #include "sd_ops.h" | 
|  |  | 
|  | MODULE_ALIAS("mmc:block"); | 
|  | #ifdef MODULE_PARAM_PREFIX | 
|  | #undef MODULE_PARAM_PREFIX | 
|  | #endif | 
|  | #define MODULE_PARAM_PREFIX "mmcblk." | 
|  |  | 
|  | /* | 
|  | * Set a 10 second timeout for polling write request busy state. Note, mmc core | 
|  | * is setting a 3 second timeout for SD cards, and SDHCI has long had a 10 | 
|  | * second software timer to timeout the whole request, so 10 seconds should be | 
|  | * ample. | 
|  | */ | 
|  | #define MMC_BLK_TIMEOUT_MS  (10 * 1000) | 
|  | #define MMC_SANITIZE_REQ_TIMEOUT 240000 | 
|  | #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) | 
|  | #define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8) | 
|  |  | 
|  | #define mmc_req_rel_wr(req)	((req->cmd_flags & REQ_FUA) && \ | 
|  | (rq_data_dir(req) == WRITE)) | 
|  | static DEFINE_MUTEX(block_mutex); | 
|  |  | 
|  | /* | 
|  | * The defaults come from config options but can be overriden by module | 
|  | * or bootarg options. | 
|  | */ | 
|  | static int perdev_minors = CONFIG_MMC_BLOCK_MINORS; | 
|  |  | 
|  | /* | 
|  | * We've only got one major, so number of mmcblk devices is | 
|  | * limited to (1 << 20) / number of minors per device.  It is also | 
|  | * limited by the MAX_DEVICES below. | 
|  | */ | 
|  | static int max_devices; | 
|  |  | 
|  | #define MAX_DEVICES 256 | 
|  |  | 
|  | static DEFINE_IDA(mmc_blk_ida); | 
|  | static DEFINE_IDA(mmc_rpmb_ida); | 
|  |  | 
|  | /* | 
|  | * There is one mmc_blk_data per slot. | 
|  | */ | 
|  | struct mmc_blk_data { | 
|  | struct device	*parent; | 
|  | struct gendisk	*disk; | 
|  | struct mmc_queue queue; | 
|  | struct list_head part; | 
|  | struct list_head rpmbs; | 
|  |  | 
|  | unsigned int	flags; | 
|  | #define MMC_BLK_CMD23	(1 << 0)	/* Can do SET_BLOCK_COUNT for multiblock */ | 
|  | #define MMC_BLK_REL_WR	(1 << 1)	/* MMC Reliable write support */ | 
|  |  | 
|  | unsigned int	usage; | 
|  | unsigned int	read_only; | 
|  | unsigned int	part_type; | 
|  | unsigned int	reset_done; | 
|  | #define MMC_BLK_READ		BIT(0) | 
|  | #define MMC_BLK_WRITE		BIT(1) | 
|  | #define MMC_BLK_DISCARD		BIT(2) | 
|  | #define MMC_BLK_SECDISCARD	BIT(3) | 
|  | #define MMC_BLK_CQE_RECOVERY	BIT(4) | 
|  |  | 
|  | /* | 
|  | * Only set in main mmc_blk_data associated | 
|  | * with mmc_card with dev_set_drvdata, and keeps | 
|  | * track of the current selected device partition. | 
|  | */ | 
|  | unsigned int	part_curr; | 
|  | struct device_attribute force_ro; | 
|  | struct device_attribute power_ro_lock; | 
|  | int	area_type; | 
|  |  | 
|  | /* debugfs files (only in main mmc_blk_data) */ | 
|  | struct dentry *status_dentry; | 
|  | struct dentry *ext_csd_dentry; | 
|  | }; | 
|  |  | 
|  | /* Device type for RPMB character devices */ | 
|  | static dev_t mmc_rpmb_devt; | 
|  |  | 
|  | /* Bus type for RPMB character devices */ | 
|  | static struct bus_type mmc_rpmb_bus_type = { | 
|  | .name = "mmc_rpmb", | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct mmc_rpmb_data - special RPMB device type for these areas | 
|  | * @dev: the device for the RPMB area | 
|  | * @chrdev: character device for the RPMB area | 
|  | * @id: unique device ID number | 
|  | * @part_index: partition index (0 on first) | 
|  | * @md: parent MMC block device | 
|  | * @node: list item, so we can put this device on a list | 
|  | */ | 
|  | struct mmc_rpmb_data { | 
|  | struct device dev; | 
|  | struct cdev chrdev; | 
|  | int id; | 
|  | unsigned int part_index; | 
|  | struct mmc_blk_data *md; | 
|  | struct list_head node; | 
|  | }; | 
|  |  | 
|  | static DEFINE_MUTEX(open_lock); | 
|  |  | 
|  | module_param(perdev_minors, int, 0444); | 
|  | MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); | 
|  |  | 
|  | static inline int mmc_blk_part_switch(struct mmc_card *card, | 
|  | unsigned int part_type); | 
|  |  | 
|  | static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) | 
|  | { | 
|  | struct mmc_blk_data *md; | 
|  |  | 
|  | mutex_lock(&open_lock); | 
|  | md = disk->private_data; | 
|  | if (md && md->usage == 0) | 
|  | md = NULL; | 
|  | if (md) | 
|  | md->usage++; | 
|  | mutex_unlock(&open_lock); | 
|  |  | 
|  | return md; | 
|  | } | 
|  |  | 
|  | static inline int mmc_get_devidx(struct gendisk *disk) | 
|  | { | 
|  | int devidx = disk->first_minor / perdev_minors; | 
|  | return devidx; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_put(struct mmc_blk_data *md) | 
|  | { | 
|  | mutex_lock(&open_lock); | 
|  | md->usage--; | 
|  | if (md->usage == 0) { | 
|  | int devidx = mmc_get_devidx(md->disk); | 
|  | blk_put_queue(md->queue.queue); | 
|  | ida_simple_remove(&mmc_blk_ida, devidx); | 
|  | put_disk(md->disk); | 
|  | kfree(md); | 
|  | } | 
|  | mutex_unlock(&open_lock); | 
|  | } | 
|  |  | 
|  | static ssize_t power_ro_lock_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int ret; | 
|  | struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
|  | struct mmc_card *card = md->queue.card; | 
|  | int locked = 0; | 
|  |  | 
|  | if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN) | 
|  | locked = 2; | 
|  | else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN) | 
|  | locked = 1; | 
|  |  | 
|  | ret = snprintf(buf, PAGE_SIZE, "%d\n", locked); | 
|  |  | 
|  | mmc_blk_put(md); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t power_ro_lock_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | int ret; | 
|  | struct mmc_blk_data *md, *part_md; | 
|  | struct mmc_queue *mq; | 
|  | struct request *req; | 
|  | unsigned long set; | 
|  |  | 
|  | if (kstrtoul(buf, 0, &set)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (set != 1) | 
|  | return count; | 
|  |  | 
|  | md = mmc_blk_get(dev_to_disk(dev)); | 
|  | mq = &md->queue; | 
|  |  | 
|  | /* Dispatch locking to the block layer */ | 
|  | req = blk_get_request(mq->queue, REQ_OP_DRV_OUT, 0); | 
|  | if (IS_ERR(req)) { | 
|  | count = PTR_ERR(req); | 
|  | goto out_put; | 
|  | } | 
|  | req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_BOOT_WP; | 
|  | blk_execute_rq(mq->queue, NULL, req, 0); | 
|  | ret = req_to_mmc_queue_req(req)->drv_op_result; | 
|  | blk_put_request(req); | 
|  |  | 
|  | if (!ret) { | 
|  | pr_info("%s: Locking boot partition ro until next power on\n", | 
|  | md->disk->disk_name); | 
|  | set_disk_ro(md->disk, 1); | 
|  |  | 
|  | list_for_each_entry(part_md, &md->part, part) | 
|  | if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) { | 
|  | pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name); | 
|  | set_disk_ro(part_md->disk, 1); | 
|  | } | 
|  | } | 
|  | out_put: | 
|  | mmc_blk_put(md); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int ret; | 
|  | struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
|  |  | 
|  | ret = snprintf(buf, PAGE_SIZE, "%d\n", | 
|  | get_disk_ro(dev_to_disk(dev)) ^ | 
|  | md->read_only); | 
|  | mmc_blk_put(md); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int ret; | 
|  | char *end; | 
|  | struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
|  | unsigned long set = simple_strtoul(buf, &end, 0); | 
|  | if (end == buf) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | set_disk_ro(dev_to_disk(dev), set || md->read_only); | 
|  | ret = count; | 
|  | out: | 
|  | mmc_blk_put(md); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_open(struct block_device *bdev, fmode_t mode) | 
|  | { | 
|  | struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); | 
|  | int ret = -ENXIO; | 
|  |  | 
|  | mutex_lock(&block_mutex); | 
|  | if (md) { | 
|  | if (md->usage == 2) | 
|  | check_disk_change(bdev); | 
|  | ret = 0; | 
|  |  | 
|  | if ((mode & FMODE_WRITE) && md->read_only) { | 
|  | mmc_blk_put(md); | 
|  | ret = -EROFS; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&block_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_release(struct gendisk *disk, fmode_t mode) | 
|  | { | 
|  | struct mmc_blk_data *md = disk->private_data; | 
|  |  | 
|  | mutex_lock(&block_mutex); | 
|  | mmc_blk_put(md); | 
|  | mutex_unlock(&block_mutex); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | 
|  | { | 
|  | geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); | 
|  | geo->heads = 4; | 
|  | geo->sectors = 16; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct mmc_blk_ioc_data { | 
|  | struct mmc_ioc_cmd ic; | 
|  | unsigned char *buf; | 
|  | u64 buf_bytes; | 
|  | struct mmc_rpmb_data *rpmb; | 
|  | }; | 
|  |  | 
|  | static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( | 
|  | struct mmc_ioc_cmd __user *user) | 
|  | { | 
|  | struct mmc_blk_ioc_data *idata; | 
|  | int err; | 
|  |  | 
|  | idata = kmalloc(sizeof(*idata), GFP_KERNEL); | 
|  | if (!idata) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) { | 
|  | err = -EFAULT; | 
|  | goto idata_err; | 
|  | } | 
|  |  | 
|  | idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks; | 
|  | if (idata->buf_bytes > MMC_IOC_MAX_BYTES) { | 
|  | err = -EOVERFLOW; | 
|  | goto idata_err; | 
|  | } | 
|  |  | 
|  | if (!idata->buf_bytes) { | 
|  | idata->buf = NULL; | 
|  | return idata; | 
|  | } | 
|  |  | 
|  | idata->buf = memdup_user((void __user *)(unsigned long) | 
|  | idata->ic.data_ptr, idata->buf_bytes); | 
|  | if (IS_ERR(idata->buf)) { | 
|  | err = PTR_ERR(idata->buf); | 
|  | goto idata_err; | 
|  | } | 
|  |  | 
|  | return idata; | 
|  |  | 
|  | idata_err: | 
|  | kfree(idata); | 
|  | out: | 
|  | return ERR_PTR(err); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr, | 
|  | struct mmc_blk_ioc_data *idata) | 
|  | { | 
|  | struct mmc_ioc_cmd *ic = &idata->ic; | 
|  |  | 
|  | if (copy_to_user(&(ic_ptr->response), ic->response, | 
|  | sizeof(ic->response))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (!idata->ic.write_flag) { | 
|  | if (copy_to_user((void __user *)(unsigned long)ic->data_ptr, | 
|  | idata->buf, idata->buf_bytes)) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status, | 
|  | u32 retries_max) | 
|  | { | 
|  | int err; | 
|  | u32 retry_count = 0; | 
|  |  | 
|  | if (!status || !retries_max) | 
|  | return -EINVAL; | 
|  |  | 
|  | do { | 
|  | err = __mmc_send_status(card, status, 5); | 
|  | if (err) | 
|  | break; | 
|  |  | 
|  | if (!R1_STATUS(*status) && | 
|  | (R1_CURRENT_STATE(*status) != R1_STATE_PRG)) | 
|  | break; /* RPMB programming operation complete */ | 
|  |  | 
|  | /* | 
|  | * Rechedule to give the MMC device a chance to continue | 
|  | * processing the previous command without being polled too | 
|  | * frequently. | 
|  | */ | 
|  | usleep_range(1000, 5000); | 
|  | } while (++retry_count < retries_max); | 
|  |  | 
|  | if (retry_count == retries_max) | 
|  | err = -EPERM; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ioctl_do_sanitize(struct mmc_card *card) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (!mmc_can_sanitize(card)) { | 
|  | pr_warn("%s: %s - SANITIZE is not supported\n", | 
|  | mmc_hostname(card->host), __func__); | 
|  | err = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: %s - SANITIZE IN PROGRESS...\n", | 
|  | mmc_hostname(card->host), __func__); | 
|  |  | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | EXT_CSD_SANITIZE_START, 1, | 
|  | MMC_SANITIZE_REQ_TIMEOUT); | 
|  |  | 
|  | if (err) | 
|  | pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n", | 
|  | mmc_hostname(card->host), __func__, err); | 
|  |  | 
|  | pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host), | 
|  | __func__); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, | 
|  | struct mmc_blk_ioc_data *idata) | 
|  | { | 
|  | struct mmc_command cmd = {}, sbc = {}; | 
|  | struct mmc_data data = {}; | 
|  | struct mmc_request mrq = {}; | 
|  | struct scatterlist sg; | 
|  | int err; | 
|  | unsigned int target_part; | 
|  | u32 status = 0; | 
|  |  | 
|  | if (!card || !md || !idata) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * The RPMB accesses comes in from the character device, so we | 
|  | * need to target these explicitly. Else we just target the | 
|  | * partition type for the block device the ioctl() was issued | 
|  | * on. | 
|  | */ | 
|  | if (idata->rpmb) { | 
|  | /* Support multiple RPMB partitions */ | 
|  | target_part = idata->rpmb->part_index; | 
|  | target_part |= EXT_CSD_PART_CONFIG_ACC_RPMB; | 
|  | } else { | 
|  | target_part = md->part_type; | 
|  | } | 
|  |  | 
|  | cmd.opcode = idata->ic.opcode; | 
|  | cmd.arg = idata->ic.arg; | 
|  | cmd.flags = idata->ic.flags; | 
|  |  | 
|  | if (idata->buf_bytes) { | 
|  | data.sg = &sg; | 
|  | data.sg_len = 1; | 
|  | data.blksz = idata->ic.blksz; | 
|  | data.blocks = idata->ic.blocks; | 
|  |  | 
|  | sg_init_one(data.sg, idata->buf, idata->buf_bytes); | 
|  |  | 
|  | if (idata->ic.write_flag) | 
|  | data.flags = MMC_DATA_WRITE; | 
|  | else | 
|  | data.flags = MMC_DATA_READ; | 
|  |  | 
|  | /* data.flags must already be set before doing this. */ | 
|  | mmc_set_data_timeout(&data, card); | 
|  |  | 
|  | /* Allow overriding the timeout_ns for empirical tuning. */ | 
|  | if (idata->ic.data_timeout_ns) | 
|  | data.timeout_ns = idata->ic.data_timeout_ns; | 
|  |  | 
|  | if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { | 
|  | /* | 
|  | * Pretend this is a data transfer and rely on the | 
|  | * host driver to compute timeout.  When all host | 
|  | * drivers support cmd.cmd_timeout for R1B, this | 
|  | * can be changed to: | 
|  | * | 
|  | *     mrq.data = NULL; | 
|  | *     cmd.cmd_timeout = idata->ic.cmd_timeout_ms; | 
|  | */ | 
|  | data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000; | 
|  | } | 
|  |  | 
|  | mrq.data = &data; | 
|  | } | 
|  |  | 
|  | mrq.cmd = &cmd; | 
|  |  | 
|  | err = mmc_blk_part_switch(card, target_part); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (idata->ic.is_acmd) { | 
|  | err = mmc_app_cmd(card->host, card); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (idata->rpmb) { | 
|  | sbc.opcode = MMC_SET_BLOCK_COUNT; | 
|  | /* | 
|  | * We don't do any blockcount validation because the max size | 
|  | * may be increased by a future standard. We just copy the | 
|  | * 'Reliable Write' bit here. | 
|  | */ | 
|  | sbc.arg = data.blocks | (idata->ic.write_flag & BIT(31)); | 
|  | sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; | 
|  | mrq.sbc = &sbc; | 
|  | } | 
|  |  | 
|  | if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) && | 
|  | (cmd.opcode == MMC_SWITCH)) { | 
|  | err = ioctl_do_sanitize(card); | 
|  |  | 
|  | if (err) | 
|  | pr_err("%s: ioctl_do_sanitize() failed. err = %d", | 
|  | __func__, err); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | mmc_wait_for_req(card->host, &mrq); | 
|  |  | 
|  | if (cmd.error) { | 
|  | dev_err(mmc_dev(card->host), "%s: cmd error %d\n", | 
|  | __func__, cmd.error); | 
|  | return cmd.error; | 
|  | } | 
|  | if (data.error) { | 
|  | dev_err(mmc_dev(card->host), "%s: data error %d\n", | 
|  | __func__, data.error); | 
|  | return data.error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Make sure the cache of the PARTITION_CONFIG register and | 
|  | * PARTITION_ACCESS bits is updated in case the ioctl ext_csd write | 
|  | * changed it successfully. | 
|  | */ | 
|  | if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_PART_CONFIG) && | 
|  | (cmd.opcode == MMC_SWITCH)) { | 
|  | struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev); | 
|  | u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg); | 
|  |  | 
|  | /* | 
|  | * Update cache so the next mmc_blk_part_switch call operates | 
|  | * on up-to-date data. | 
|  | */ | 
|  | card->ext_csd.part_config = value; | 
|  | main_md->part_curr = value & EXT_CSD_PART_CONFIG_ACC_MASK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * According to the SD specs, some commands require a delay after | 
|  | * issuing the command. | 
|  | */ | 
|  | if (idata->ic.postsleep_min_us) | 
|  | usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); | 
|  |  | 
|  | memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp)); | 
|  |  | 
|  | if (idata->rpmb) { | 
|  | /* | 
|  | * Ensure RPMB command has completed by polling CMD13 | 
|  | * "Send Status". | 
|  | */ | 
|  | err = ioctl_rpmb_card_status_poll(card, &status, 5); | 
|  | if (err) | 
|  | dev_err(mmc_dev(card->host), | 
|  | "%s: Card Status=0x%08X, error %d\n", | 
|  | __func__, status, err); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md, | 
|  | struct mmc_ioc_cmd __user *ic_ptr, | 
|  | struct mmc_rpmb_data *rpmb) | 
|  | { | 
|  | struct mmc_blk_ioc_data *idata; | 
|  | struct mmc_blk_ioc_data *idatas[1]; | 
|  | struct mmc_queue *mq; | 
|  | struct mmc_card *card; | 
|  | int err = 0, ioc_err = 0; | 
|  | struct request *req; | 
|  |  | 
|  | idata = mmc_blk_ioctl_copy_from_user(ic_ptr); | 
|  | if (IS_ERR(idata)) | 
|  | return PTR_ERR(idata); | 
|  | /* This will be NULL on non-RPMB ioctl():s */ | 
|  | idata->rpmb = rpmb; | 
|  |  | 
|  | card = md->queue.card; | 
|  | if (IS_ERR(card)) { | 
|  | err = PTR_ERR(card); | 
|  | goto cmd_done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Dispatch the ioctl() into the block request queue. | 
|  | */ | 
|  | mq = &md->queue; | 
|  | req = blk_get_request(mq->queue, | 
|  | idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0); | 
|  | if (IS_ERR(req)) { | 
|  | err = PTR_ERR(req); | 
|  | goto cmd_done; | 
|  | } | 
|  | idatas[0] = idata; | 
|  | req_to_mmc_queue_req(req)->drv_op = | 
|  | rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; | 
|  | req_to_mmc_queue_req(req)->drv_op_data = idatas; | 
|  | req_to_mmc_queue_req(req)->ioc_count = 1; | 
|  | blk_execute_rq(mq->queue, NULL, req, 0); | 
|  | ioc_err = req_to_mmc_queue_req(req)->drv_op_result; | 
|  | err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata); | 
|  | blk_put_request(req); | 
|  |  | 
|  | cmd_done: | 
|  | kfree(idata->buf); | 
|  | kfree(idata); | 
|  | return ioc_err ? ioc_err : err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md, | 
|  | struct mmc_ioc_multi_cmd __user *user, | 
|  | struct mmc_rpmb_data *rpmb) | 
|  | { | 
|  | struct mmc_blk_ioc_data **idata = NULL; | 
|  | struct mmc_ioc_cmd __user *cmds = user->cmds; | 
|  | struct mmc_card *card; | 
|  | struct mmc_queue *mq; | 
|  | int i, err = 0, ioc_err = 0; | 
|  | __u64 num_of_cmds; | 
|  | struct request *req; | 
|  |  | 
|  | if (copy_from_user(&num_of_cmds, &user->num_of_cmds, | 
|  | sizeof(num_of_cmds))) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (!num_of_cmds) | 
|  | return 0; | 
|  |  | 
|  | if (num_of_cmds > MMC_IOC_MAX_CMDS) | 
|  | return -EINVAL; | 
|  |  | 
|  | idata = kcalloc(num_of_cmds, sizeof(*idata), GFP_KERNEL); | 
|  | if (!idata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < num_of_cmds; i++) { | 
|  | idata[i] = mmc_blk_ioctl_copy_from_user(&cmds[i]); | 
|  | if (IS_ERR(idata[i])) { | 
|  | err = PTR_ERR(idata[i]); | 
|  | num_of_cmds = i; | 
|  | goto cmd_err; | 
|  | } | 
|  | /* This will be NULL on non-RPMB ioctl():s */ | 
|  | idata[i]->rpmb = rpmb; | 
|  | } | 
|  |  | 
|  | card = md->queue.card; | 
|  | if (IS_ERR(card)) { | 
|  | err = PTR_ERR(card); | 
|  | goto cmd_err; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Dispatch the ioctl()s into the block request queue. | 
|  | */ | 
|  | mq = &md->queue; | 
|  | req = blk_get_request(mq->queue, | 
|  | idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0); | 
|  | if (IS_ERR(req)) { | 
|  | err = PTR_ERR(req); | 
|  | goto cmd_err; | 
|  | } | 
|  | req_to_mmc_queue_req(req)->drv_op = | 
|  | rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; | 
|  | req_to_mmc_queue_req(req)->drv_op_data = idata; | 
|  | req_to_mmc_queue_req(req)->ioc_count = num_of_cmds; | 
|  | blk_execute_rq(mq->queue, NULL, req, 0); | 
|  | ioc_err = req_to_mmc_queue_req(req)->drv_op_result; | 
|  |  | 
|  | /* copy to user if data and response */ | 
|  | for (i = 0; i < num_of_cmds && !err; i++) | 
|  | err = mmc_blk_ioctl_copy_to_user(&cmds[i], idata[i]); | 
|  |  | 
|  | blk_put_request(req); | 
|  |  | 
|  | cmd_err: | 
|  | for (i = 0; i < num_of_cmds; i++) { | 
|  | kfree(idata[i]->buf); | 
|  | kfree(idata[i]); | 
|  | } | 
|  | kfree(idata); | 
|  | return ioc_err ? ioc_err : err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_check_blkdev(struct block_device *bdev) | 
|  | { | 
|  | /* | 
|  | * The caller must have CAP_SYS_RAWIO, and must be calling this on the | 
|  | * whole block device, not on a partition.  This prevents overspray | 
|  | * between sibling partitions. | 
|  | */ | 
|  | if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains)) | 
|  | return -EPERM; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct mmc_blk_data *md; | 
|  | int ret; | 
|  |  | 
|  | switch (cmd) { | 
|  | case MMC_IOC_CMD: | 
|  | ret = mmc_blk_check_blkdev(bdev); | 
|  | if (ret) | 
|  | return ret; | 
|  | md = mmc_blk_get(bdev->bd_disk); | 
|  | if (!md) | 
|  | return -EINVAL; | 
|  | ret = mmc_blk_ioctl_cmd(md, | 
|  | (struct mmc_ioc_cmd __user *)arg, | 
|  | NULL); | 
|  | mmc_blk_put(md); | 
|  | return ret; | 
|  | case MMC_IOC_MULTI_CMD: | 
|  | ret = mmc_blk_check_blkdev(bdev); | 
|  | if (ret) | 
|  | return ret; | 
|  | md = mmc_blk_get(bdev->bd_disk); | 
|  | if (!md) | 
|  | return -EINVAL; | 
|  | ret = mmc_blk_ioctl_multi_cmd(md, | 
|  | (struct mmc_ioc_multi_cmd __user *)arg, | 
|  | NULL); | 
|  | mmc_blk_put(md); | 
|  | return ret; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_COMPAT | 
|  | static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static const struct block_device_operations mmc_bdops = { | 
|  | .open			= mmc_blk_open, | 
|  | .release		= mmc_blk_release, | 
|  | .getgeo			= mmc_blk_getgeo, | 
|  | .owner			= THIS_MODULE, | 
|  | .ioctl			= mmc_blk_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl		= mmc_blk_compat_ioctl, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int mmc_blk_part_switch_pre(struct mmc_card *card, | 
|  | unsigned int part_type) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) { | 
|  | if (card->ext_csd.cmdq_en) { | 
|  | ret = mmc_cmdq_disable(card); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | mmc_retune_pause(card->host); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_part_switch_post(struct mmc_card *card, | 
|  | unsigned int part_type) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) { | 
|  | mmc_retune_unpause(card->host); | 
|  | if (card->reenable_cmdq && !card->ext_csd.cmdq_en) | 
|  | ret = mmc_cmdq_enable(card); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int mmc_blk_part_switch(struct mmc_card *card, | 
|  | unsigned int part_type) | 
|  | { | 
|  | int ret = 0; | 
|  | struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev); | 
|  |  | 
|  | if (main_md->part_curr == part_type) | 
|  | return 0; | 
|  |  | 
|  | if (mmc_card_mmc(card)) { | 
|  | u8 part_config = card->ext_csd.part_config; | 
|  |  | 
|  | ret = mmc_blk_part_switch_pre(card, part_type); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; | 
|  | part_config |= part_type; | 
|  |  | 
|  | ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | EXT_CSD_PART_CONFIG, part_config, | 
|  | card->ext_csd.part_time); | 
|  | if (ret) { | 
|  | mmc_blk_part_switch_post(card, part_type); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | card->ext_csd.part_config = part_config; | 
|  |  | 
|  | ret = mmc_blk_part_switch_post(card, main_md->part_curr); | 
|  | } | 
|  |  | 
|  | main_md->part_curr = part_type; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) | 
|  | { | 
|  | int err; | 
|  | u32 result; | 
|  | __be32 *blocks; | 
|  |  | 
|  | struct mmc_request mrq = {}; | 
|  | struct mmc_command cmd = {}; | 
|  | struct mmc_data data = {}; | 
|  |  | 
|  | struct scatterlist sg; | 
|  |  | 
|  | cmd.opcode = MMC_APP_CMD; | 
|  | cmd.arg = card->rca << 16; | 
|  | cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | 
|  |  | 
|  | err = mmc_wait_for_cmd(card->host, &cmd, 0); | 
|  | if (err) | 
|  | return err; | 
|  | if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD)) | 
|  | return -EIO; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(struct mmc_command)); | 
|  |  | 
|  | cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; | 
|  | cmd.arg = 0; | 
|  | cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | 
|  |  | 
|  | data.blksz = 4; | 
|  | data.blocks = 1; | 
|  | data.flags = MMC_DATA_READ; | 
|  | data.sg = &sg; | 
|  | data.sg_len = 1; | 
|  | mmc_set_data_timeout(&data, card); | 
|  |  | 
|  | mrq.cmd = &cmd; | 
|  | mrq.data = &data; | 
|  |  | 
|  | blocks = kmalloc(4, GFP_KERNEL); | 
|  | if (!blocks) | 
|  | return -ENOMEM; | 
|  |  | 
|  | sg_init_one(&sg, blocks, 4); | 
|  |  | 
|  | mmc_wait_for_req(card->host, &mrq); | 
|  |  | 
|  | result = ntohl(*blocks); | 
|  | kfree(blocks); | 
|  |  | 
|  | if (cmd.error || data.error) | 
|  | return -EIO; | 
|  |  | 
|  | *written_blocks = result; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned int mmc_blk_clock_khz(struct mmc_host *host) | 
|  | { | 
|  | if (host->actual_clock) | 
|  | return host->actual_clock / 1000; | 
|  |  | 
|  | /* Clock may be subject to a divisor, fudge it by a factor of 2. */ | 
|  | if (host->ios.clock) | 
|  | return host->ios.clock / 2000; | 
|  |  | 
|  | /* How can there be no clock */ | 
|  | WARN_ON_ONCE(1); | 
|  | return 100; /* 100 kHz is minimum possible value */ | 
|  | } | 
|  |  | 
|  | static unsigned int mmc_blk_data_timeout_ms(struct mmc_host *host, | 
|  | struct mmc_data *data) | 
|  | { | 
|  | unsigned int ms = DIV_ROUND_UP(data->timeout_ns, 1000000); | 
|  | unsigned int khz; | 
|  |  | 
|  | if (data->timeout_clks) { | 
|  | khz = mmc_blk_clock_khz(host); | 
|  | ms += DIV_ROUND_UP(data->timeout_clks, khz); | 
|  | } | 
|  |  | 
|  | return ms; | 
|  | } | 
|  |  | 
|  | static inline bool mmc_blk_in_tran_state(u32 status) | 
|  | { | 
|  | /* | 
|  | * Some cards mishandle the status bits, so make sure to check both the | 
|  | * busy indication and the card state. | 
|  | */ | 
|  | return status & R1_READY_FOR_DATA && | 
|  | (R1_CURRENT_STATE(status) == R1_STATE_TRAN); | 
|  | } | 
|  |  | 
|  | static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, | 
|  | struct request *req, u32 *resp_errs) | 
|  | { | 
|  | unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); | 
|  | int err = 0; | 
|  | u32 status; | 
|  |  | 
|  | do { | 
|  | bool done = time_after(jiffies, timeout); | 
|  |  | 
|  | err = __mmc_send_status(card, &status, 5); | 
|  | if (err) { | 
|  | pr_err("%s: error %d requesting status\n", | 
|  | req->rq_disk->disk_name, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* Accumulate any response error bits seen */ | 
|  | if (resp_errs) | 
|  | *resp_errs |= status; | 
|  |  | 
|  | /* | 
|  | * Timeout if the device never becomes ready for data and never | 
|  | * leaves the program state. | 
|  | */ | 
|  | if (done) { | 
|  | pr_err("%s: Card stuck in wrong state! %s %s status: %#x\n", | 
|  | mmc_hostname(card->host), | 
|  | req->rq_disk->disk_name, __func__, status); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some cards mishandle the status bits, | 
|  | * so make sure to check both the busy | 
|  | * indication and the card state. | 
|  | */ | 
|  | } while (!mmc_blk_in_tran_state(status)); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, | 
|  | int type) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (md->reset_done & type) | 
|  | return -EEXIST; | 
|  |  | 
|  | md->reset_done |= type; | 
|  | err = mmc_hw_reset(host); | 
|  | /* Ensure we switch back to the correct partition */ | 
|  | if (err != -EOPNOTSUPP) { | 
|  | struct mmc_blk_data *main_md = | 
|  | dev_get_drvdata(&host->card->dev); | 
|  | int part_err; | 
|  |  | 
|  | main_md->part_curr = main_md->part_type; | 
|  | part_err = mmc_blk_part_switch(host->card, md->part_type); | 
|  | if (part_err) { | 
|  | /* | 
|  | * We have failed to get back into the correct | 
|  | * partition, so we need to abort the whole request. | 
|  | */ | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) | 
|  | { | 
|  | md->reset_done &= ~type; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The non-block commands come back from the block layer after it queued it and | 
|  | * processed it with all other requests and then they get issued in this | 
|  | * function. | 
|  | */ | 
|  | static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mq_rq; | 
|  | struct mmc_card *card = mq->card; | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_blk_ioc_data **idata; | 
|  | bool rpmb_ioctl; | 
|  | u8 **ext_csd; | 
|  | u32 status; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | mq_rq = req_to_mmc_queue_req(req); | 
|  | rpmb_ioctl = (mq_rq->drv_op == MMC_DRV_OP_IOCTL_RPMB); | 
|  |  | 
|  | switch (mq_rq->drv_op) { | 
|  | case MMC_DRV_OP_IOCTL: | 
|  | case MMC_DRV_OP_IOCTL_RPMB: | 
|  | idata = mq_rq->drv_op_data; | 
|  | for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) { | 
|  | ret = __mmc_blk_ioctl_cmd(card, md, idata[i]); | 
|  | if (ret) | 
|  | break; | 
|  | } | 
|  | /* Always switch back to main area after RPMB access */ | 
|  | if (rpmb_ioctl) | 
|  | mmc_blk_part_switch(card, 0); | 
|  | break; | 
|  | case MMC_DRV_OP_BOOT_WP: | 
|  | ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, | 
|  | card->ext_csd.boot_ro_lock | | 
|  | EXT_CSD_BOOT_WP_B_PWR_WP_EN, | 
|  | card->ext_csd.part_time); | 
|  | if (ret) | 
|  | pr_err("%s: Locking boot partition ro until next power on failed: %d\n", | 
|  | md->disk->disk_name, ret); | 
|  | else | 
|  | card->ext_csd.boot_ro_lock |= | 
|  | EXT_CSD_BOOT_WP_B_PWR_WP_EN; | 
|  | break; | 
|  | case MMC_DRV_OP_GET_CARD_STATUS: | 
|  | ret = mmc_send_status(card, &status); | 
|  | if (!ret) | 
|  | ret = status; | 
|  | break; | 
|  | case MMC_DRV_OP_GET_EXT_CSD: | 
|  | ext_csd = mq_rq->drv_op_data; | 
|  | ret = mmc_get_ext_csd(card, ext_csd); | 
|  | break; | 
|  | default: | 
|  | pr_err("%s: unknown driver specific operation\n", | 
|  | md->disk->disk_name); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | mq_rq->drv_op_result = ret; | 
|  | blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = md->queue.card; | 
|  | unsigned int from, nr; | 
|  | int err = 0, type = MMC_BLK_DISCARD; | 
|  | blk_status_t status = BLK_STS_OK; | 
|  |  | 
|  | if (!mmc_can_erase(card)) { | 
|  | status = BLK_STS_NOTSUPP; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | from = blk_rq_pos(req); | 
|  | nr = blk_rq_sectors(req); | 
|  |  | 
|  | do { | 
|  | err = 0; | 
|  | if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | INAND_CMD38_ARG_EXT_CSD, | 
|  | card->erase_arg == MMC_TRIM_ARG ? | 
|  | INAND_CMD38_ARG_TRIM : | 
|  | INAND_CMD38_ARG_ERASE, | 
|  | 0); | 
|  | } | 
|  | if (!err) | 
|  | err = mmc_erase(card, from, nr, card->erase_arg); | 
|  | } while (err == -EIO && !mmc_blk_reset(md, card->host, type)); | 
|  | if (err) | 
|  | status = BLK_STS_IOERR; | 
|  | else | 
|  | mmc_blk_reset_success(md, type); | 
|  | fail: | 
|  | blk_mq_end_request(req, status); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, | 
|  | struct request *req) | 
|  | { | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = md->queue.card; | 
|  | unsigned int from, nr, arg; | 
|  | int err = 0, type = MMC_BLK_SECDISCARD; | 
|  | blk_status_t status = BLK_STS_OK; | 
|  |  | 
|  | if (!(mmc_can_secure_erase_trim(card))) { | 
|  | status = BLK_STS_NOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | from = blk_rq_pos(req); | 
|  | nr = blk_rq_sectors(req); | 
|  |  | 
|  | if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) | 
|  | arg = MMC_SECURE_TRIM1_ARG; | 
|  | else | 
|  | arg = MMC_SECURE_ERASE_ARG; | 
|  |  | 
|  | retry: | 
|  | if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | INAND_CMD38_ARG_EXT_CSD, | 
|  | arg == MMC_SECURE_TRIM1_ARG ? | 
|  | INAND_CMD38_ARG_SECTRIM1 : | 
|  | INAND_CMD38_ARG_SECERASE, | 
|  | 0); | 
|  | if (err) | 
|  | goto out_retry; | 
|  | } | 
|  |  | 
|  | err = mmc_erase(card, from, nr, arg); | 
|  | if (err == -EIO) | 
|  | goto out_retry; | 
|  | if (err) { | 
|  | status = BLK_STS_IOERR; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (arg == MMC_SECURE_TRIM1_ARG) { | 
|  | if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | INAND_CMD38_ARG_EXT_CSD, | 
|  | INAND_CMD38_ARG_SECTRIM2, | 
|  | 0); | 
|  | if (err) | 
|  | goto out_retry; | 
|  | } | 
|  |  | 
|  | err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); | 
|  | if (err == -EIO) | 
|  | goto out_retry; | 
|  | if (err) { | 
|  | status = BLK_STS_IOERR; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out_retry: | 
|  | if (err && !mmc_blk_reset(md, card->host, type)) | 
|  | goto retry; | 
|  | if (!err) | 
|  | mmc_blk_reset_success(md, type); | 
|  | out: | 
|  | blk_mq_end_request(req, status); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = md->queue.card; | 
|  | int ret = 0; | 
|  |  | 
|  | ret = mmc_flush_cache(card); | 
|  | blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reformat current write as a reliable write, supporting | 
|  | * both legacy and the enhanced reliable write MMC cards. | 
|  | * In each transfer we'll handle only as much as a single | 
|  | * reliable write can handle, thus finish the request in | 
|  | * partial completions. | 
|  | */ | 
|  | static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, | 
|  | struct mmc_card *card, | 
|  | struct request *req) | 
|  | { | 
|  | if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) { | 
|  | /* Legacy mode imposes restrictions on transfers. */ | 
|  | if (!IS_ALIGNED(blk_rq_pos(req), card->ext_csd.rel_sectors)) | 
|  | brq->data.blocks = 1; | 
|  |  | 
|  | if (brq->data.blocks > card->ext_csd.rel_sectors) | 
|  | brq->data.blocks = card->ext_csd.rel_sectors; | 
|  | else if (brq->data.blocks < card->ext_csd.rel_sectors) | 
|  | brq->data.blocks = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define CMD_ERRORS_EXCL_OOR						\ | 
|  | (R1_ADDRESS_ERROR |	/* Misaligned address */		\ | 
|  | R1_BLOCK_LEN_ERROR |	/* Transferred block length incorrect */\ | 
|  | R1_WP_VIOLATION |	/* Tried to write to protected block */	\ | 
|  | R1_CARD_ECC_FAILED |	/* Card ECC failed */			\ | 
|  | R1_CC_ERROR |		/* Card controller error */		\ | 
|  | R1_ERROR)		/* General/unknown error */ | 
|  |  | 
|  | #define CMD_ERRORS							\ | 
|  | (CMD_ERRORS_EXCL_OOR |						\ | 
|  | R1_OUT_OF_RANGE)	/* Command argument out of range */	\ | 
|  |  | 
|  | static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | /* | 
|  | * Per the SD specification(physical layer version 4.10)[1], | 
|  | * section 4.3.3, it explicitly states that "When the last | 
|  | * block of user area is read using CMD18, the host should | 
|  | * ignore OUT_OF_RANGE error that may occur even the sequence | 
|  | * is correct". And JESD84-B51 for eMMC also has a similar | 
|  | * statement on section 6.8.3. | 
|  | * | 
|  | * Multiple block read/write could be done by either predefined | 
|  | * method, namely CMD23, or open-ending mode. For open-ending mode, | 
|  | * we should ignore the OUT_OF_RANGE error as it's normal behaviour. | 
|  | * | 
|  | * However the spec[1] doesn't tell us whether we should also | 
|  | * ignore that for predefined method. But per the spec[1], section | 
|  | * 4.15 Set Block Count Command, it says"If illegal block count | 
|  | * is set, out of range error will be indicated during read/write | 
|  | * operation (For example, data transfer is stopped at user area | 
|  | * boundary)." In another word, we could expect a out of range error | 
|  | * in the response for the following CMD18/25. And if argument of | 
|  | * CMD23 + the argument of CMD18/25 exceed the max number of blocks, | 
|  | * we could also expect to get a -ETIMEDOUT or any error number from | 
|  | * the host drivers due to missing data response(for write)/data(for | 
|  | * read), as the cards will stop the data transfer by itself per the | 
|  | * spec. So we only need to check R1_OUT_OF_RANGE for open-ending mode. | 
|  | */ | 
|  |  | 
|  | if (!brq->stop.error) { | 
|  | bool oor_with_open_end; | 
|  | /* If there is no error yet, check R1 response */ | 
|  |  | 
|  | val = brq->stop.resp[0] & CMD_ERRORS; | 
|  | oor_with_open_end = val & R1_OUT_OF_RANGE && !brq->mrq.sbc; | 
|  |  | 
|  | if (val && !oor_with_open_end) | 
|  | brq->stop.error = -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, | 
|  | int disable_multi, bool *do_rel_wr_p, | 
|  | bool *do_data_tag_p) | 
|  | { | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = md->queue.card; | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  | struct request *req = mmc_queue_req_to_req(mqrq); | 
|  | bool do_rel_wr, do_data_tag; | 
|  |  | 
|  | /* | 
|  | * Reliable writes are used to implement Forced Unit Access and | 
|  | * are supported only on MMCs. | 
|  | */ | 
|  | do_rel_wr = (req->cmd_flags & REQ_FUA) && | 
|  | rq_data_dir(req) == WRITE && | 
|  | (md->flags & MMC_BLK_REL_WR); | 
|  |  | 
|  | memset(brq, 0, sizeof(struct mmc_blk_request)); | 
|  |  | 
|  | brq->mrq.data = &brq->data; | 
|  | brq->mrq.tag = req->tag; | 
|  |  | 
|  | brq->stop.opcode = MMC_STOP_TRANSMISSION; | 
|  | brq->stop.arg = 0; | 
|  |  | 
|  | if (rq_data_dir(req) == READ) { | 
|  | brq->data.flags = MMC_DATA_READ; | 
|  | brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | 
|  | } else { | 
|  | brq->data.flags = MMC_DATA_WRITE; | 
|  | brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; | 
|  | } | 
|  |  | 
|  | brq->data.blksz = 512; | 
|  | brq->data.blocks = blk_rq_sectors(req); | 
|  | brq->data.blk_addr = blk_rq_pos(req); | 
|  |  | 
|  | /* | 
|  | * The command queue supports 2 priorities: "high" (1) and "simple" (0). | 
|  | * The eMMC will give "high" priority tasks priority over "simple" | 
|  | * priority tasks. Here we always set "simple" priority by not setting | 
|  | * MMC_DATA_PRIO. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * The block layer doesn't support all sector count | 
|  | * restrictions, so we need to be prepared for too big | 
|  | * requests. | 
|  | */ | 
|  | if (brq->data.blocks > card->host->max_blk_count) | 
|  | brq->data.blocks = card->host->max_blk_count; | 
|  |  | 
|  | if (brq->data.blocks > 1) { | 
|  | /* | 
|  | * Some SD cards in SPI mode return a CRC error or even lock up | 
|  | * completely when trying to read the last block using a | 
|  | * multiblock read command. | 
|  | */ | 
|  | if (mmc_host_is_spi(card->host) && (rq_data_dir(req) == READ) && | 
|  | (blk_rq_pos(req) + blk_rq_sectors(req) == | 
|  | get_capacity(md->disk))) | 
|  | brq->data.blocks--; | 
|  |  | 
|  | /* | 
|  | * After a read error, we redo the request one sector | 
|  | * at a time in order to accurately determine which | 
|  | * sectors can be read successfully. | 
|  | */ | 
|  | if (disable_multi) | 
|  | brq->data.blocks = 1; | 
|  |  | 
|  | /* | 
|  | * Some controllers have HW issues while operating | 
|  | * in multiple I/O mode | 
|  | */ | 
|  | if (card->host->ops->multi_io_quirk) | 
|  | brq->data.blocks = card->host->ops->multi_io_quirk(card, | 
|  | (rq_data_dir(req) == READ) ? | 
|  | MMC_DATA_READ : MMC_DATA_WRITE, | 
|  | brq->data.blocks); | 
|  | } | 
|  |  | 
|  | if (do_rel_wr) { | 
|  | mmc_apply_rel_rw(brq, card, req); | 
|  | brq->data.flags |= MMC_DATA_REL_WR; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Data tag is used only during writing meta data to speed | 
|  | * up write and any subsequent read of this meta data | 
|  | */ | 
|  | do_data_tag = card->ext_csd.data_tag_unit_size && | 
|  | (req->cmd_flags & REQ_META) && | 
|  | (rq_data_dir(req) == WRITE) && | 
|  | ((brq->data.blocks * brq->data.blksz) >= | 
|  | card->ext_csd.data_tag_unit_size); | 
|  |  | 
|  | if (do_data_tag) | 
|  | brq->data.flags |= MMC_DATA_DAT_TAG; | 
|  |  | 
|  | mmc_set_data_timeout(&brq->data, card); | 
|  |  | 
|  | brq->data.sg = mqrq->sg; | 
|  | brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); | 
|  |  | 
|  | /* | 
|  | * Adjust the sg list so it is the same size as the | 
|  | * request. | 
|  | */ | 
|  | if (brq->data.blocks != blk_rq_sectors(req)) { | 
|  | int i, data_size = brq->data.blocks << 9; | 
|  | struct scatterlist *sg; | 
|  |  | 
|  | for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { | 
|  | data_size -= sg->length; | 
|  | if (data_size <= 0) { | 
|  | sg->length += data_size; | 
|  | i++; | 
|  | break; | 
|  | } | 
|  | } | 
|  | brq->data.sg_len = i; | 
|  | } | 
|  |  | 
|  | if (do_rel_wr_p) | 
|  | *do_rel_wr_p = do_rel_wr; | 
|  |  | 
|  | if (do_data_tag_p) | 
|  | *do_data_tag_p = do_data_tag; | 
|  | } | 
|  |  | 
|  | #define MMC_CQE_RETRIES 2 | 
|  |  | 
|  | static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_request *mrq = &mqrq->brq.mrq; | 
|  | struct request_queue *q = req->q; | 
|  | struct mmc_host *host = mq->card->host; | 
|  | unsigned long flags; | 
|  | bool put_card; | 
|  | int err; | 
|  |  | 
|  | mmc_cqe_post_req(host, mrq); | 
|  |  | 
|  | if (mrq->cmd && mrq->cmd->error) | 
|  | err = mrq->cmd->error; | 
|  | else if (mrq->data && mrq->data->error) | 
|  | err = mrq->data->error; | 
|  | else | 
|  | err = 0; | 
|  |  | 
|  | if (err) { | 
|  | if (mqrq->retries++ < MMC_CQE_RETRIES) | 
|  | blk_mq_requeue_request(req, true); | 
|  | else | 
|  | blk_mq_end_request(req, BLK_STS_IOERR); | 
|  | } else if (mrq->data) { | 
|  | if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered)) | 
|  | blk_mq_requeue_request(req, true); | 
|  | else | 
|  | __blk_mq_end_request(req, BLK_STS_OK); | 
|  | } else { | 
|  | blk_mq_end_request(req, BLK_STS_OK); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&mq->lock, flags); | 
|  |  | 
|  | mq->in_flight[mmc_issue_type(mq, req)] -= 1; | 
|  |  | 
|  | put_card = (mmc_tot_in_flight(mq) == 0); | 
|  |  | 
|  | mmc_cqe_check_busy(mq); | 
|  |  | 
|  | spin_unlock_irqrestore(&mq->lock, flags); | 
|  |  | 
|  | if (!mq->cqe_busy) | 
|  | blk_mq_run_hw_queues(q, true); | 
|  |  | 
|  | if (put_card) | 
|  | mmc_put_card(mq->card, &mq->ctx); | 
|  | } | 
|  |  | 
|  | void mmc_blk_cqe_recovery(struct mmc_queue *mq) | 
|  | { | 
|  | struct mmc_card *card = mq->card; | 
|  | struct mmc_host *host = card->host; | 
|  | int err; | 
|  |  | 
|  | pr_debug("%s: CQE recovery start\n", mmc_hostname(host)); | 
|  |  | 
|  | err = mmc_cqe_recovery(host); | 
|  | if (err) | 
|  | mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY); | 
|  | else | 
|  | mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY); | 
|  |  | 
|  | pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_cqe_req_done(struct mmc_request *mrq) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, | 
|  | brq.mrq); | 
|  | struct request *req = mmc_queue_req_to_req(mqrq); | 
|  | struct request_queue *q = req->q; | 
|  | struct mmc_queue *mq = q->queuedata; | 
|  |  | 
|  | /* | 
|  | * Block layer timeouts race with completions which means the normal | 
|  | * completion path cannot be used during recovery. | 
|  | */ | 
|  | if (mq->in_recovery) | 
|  | mmc_blk_cqe_complete_rq(mq, req); | 
|  | else | 
|  | blk_mq_complete_request(req); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) | 
|  | { | 
|  | mrq->done		= mmc_blk_cqe_req_done; | 
|  | mrq->recovery_notifier	= mmc_cqe_recovery_notifier; | 
|  |  | 
|  | return mmc_cqe_start_req(host, mrq); | 
|  | } | 
|  |  | 
|  | static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq, | 
|  | struct request *req) | 
|  | { | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  |  | 
|  | memset(brq, 0, sizeof(*brq)); | 
|  |  | 
|  | brq->mrq.cmd = &brq->cmd; | 
|  | brq->mrq.tag = req->tag; | 
|  |  | 
|  | return &brq->mrq; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req); | 
|  |  | 
|  | mrq->cmd->opcode = MMC_SWITCH; | 
|  | mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | | 
|  | (EXT_CSD_FLUSH_CACHE << 16) | | 
|  | (1 << 8) | | 
|  | EXT_CSD_CMD_SET_NORMAL; | 
|  | mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B; | 
|  |  | 
|  | return mmc_blk_cqe_start_req(mq->card->host, mrq); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  |  | 
|  | mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL); | 
|  |  | 
|  | return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, | 
|  | struct mmc_card *card, | 
|  | int disable_multi, | 
|  | struct mmc_queue *mq) | 
|  | { | 
|  | u32 readcmd, writecmd; | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  | struct request *req = mmc_queue_req_to_req(mqrq); | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | bool do_rel_wr, do_data_tag; | 
|  |  | 
|  | mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag); | 
|  |  | 
|  | brq->mrq.cmd = &brq->cmd; | 
|  |  | 
|  | brq->cmd.arg = blk_rq_pos(req); | 
|  | if (!mmc_card_blockaddr(card)) | 
|  | brq->cmd.arg <<= 9; | 
|  | brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | 
|  |  | 
|  | if (brq->data.blocks > 1 || do_rel_wr) { | 
|  | /* SPI multiblock writes terminate using a special | 
|  | * token, not a STOP_TRANSMISSION request. | 
|  | */ | 
|  | if (!mmc_host_is_spi(card->host) || | 
|  | rq_data_dir(req) == READ) | 
|  | brq->mrq.stop = &brq->stop; | 
|  | readcmd = MMC_READ_MULTIPLE_BLOCK; | 
|  | writecmd = MMC_WRITE_MULTIPLE_BLOCK; | 
|  | } else { | 
|  | brq->mrq.stop = NULL; | 
|  | readcmd = MMC_READ_SINGLE_BLOCK; | 
|  | writecmd = MMC_WRITE_BLOCK; | 
|  | } | 
|  | brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd; | 
|  |  | 
|  | /* | 
|  | * Pre-defined multi-block transfers are preferable to | 
|  | * open ended-ones (and necessary for reliable writes). | 
|  | * However, it is not sufficient to just send CMD23, | 
|  | * and avoid the final CMD12, as on an error condition | 
|  | * CMD12 (stop) needs to be sent anyway. This, coupled | 
|  | * with Auto-CMD23 enhancements provided by some | 
|  | * hosts, means that the complexity of dealing | 
|  | * with this is best left to the host. If CMD23 is | 
|  | * supported by card and host, we'll fill sbc in and let | 
|  | * the host deal with handling it correctly. This means | 
|  | * that for hosts that don't expose MMC_CAP_CMD23, no | 
|  | * change of behavior will be observed. | 
|  | * | 
|  | * N.B: Some MMC cards experience perf degradation. | 
|  | * We'll avoid using CMD23-bounded multiblock writes for | 
|  | * these, while retaining features like reliable writes. | 
|  | */ | 
|  | if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && | 
|  | (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || | 
|  | do_data_tag)) { | 
|  | brq->sbc.opcode = MMC_SET_BLOCK_COUNT; | 
|  | brq->sbc.arg = brq->data.blocks | | 
|  | (do_rel_wr ? (1 << 31) : 0) | | 
|  | (do_data_tag ? (1 << 29) : 0); | 
|  | brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; | 
|  | brq->mrq.sbc = &brq->sbc; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define MMC_MAX_RETRIES		5 | 
|  | #define MMC_DATA_RETRIES	2 | 
|  | #define MMC_NO_RETRIES		(MMC_MAX_RETRIES + 1) | 
|  |  | 
|  | static int mmc_blk_send_stop(struct mmc_card *card, unsigned int timeout) | 
|  | { | 
|  | struct mmc_command cmd = { | 
|  | .opcode = MMC_STOP_TRANSMISSION, | 
|  | .flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC, | 
|  | /* Some hosts wait for busy anyway, so provide a busy timeout */ | 
|  | .busy_timeout = timeout, | 
|  | }; | 
|  |  | 
|  | return mmc_wait_for_cmd(card->host, &cmd, 5); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  | unsigned int timeout = mmc_blk_data_timeout_ms(card->host, &brq->data); | 
|  | int err; | 
|  |  | 
|  | mmc_retune_hold_now(card->host); | 
|  |  | 
|  | mmc_blk_send_stop(card, timeout); | 
|  |  | 
|  | err = card_busy_detect(card, timeout, req, NULL); | 
|  |  | 
|  | mmc_retune_release(card->host); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #define MMC_READ_SINGLE_RETRIES	2 | 
|  |  | 
|  | /* Single sector read during recovery */ | 
|  | static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_request *mrq = &mqrq->brq.mrq; | 
|  | struct mmc_card *card = mq->card; | 
|  | struct mmc_host *host = card->host; | 
|  | blk_status_t error = BLK_STS_OK; | 
|  | int retries = 0; | 
|  |  | 
|  | do { | 
|  | u32 status; | 
|  | int err; | 
|  |  | 
|  | mmc_blk_rw_rq_prep(mqrq, card, 1, mq); | 
|  |  | 
|  | mmc_wait_for_req(host, mrq); | 
|  |  | 
|  | err = mmc_send_status(card, &status); | 
|  | if (err) | 
|  | goto error_exit; | 
|  |  | 
|  | if (!mmc_host_is_spi(host) && | 
|  | !mmc_blk_in_tran_state(status)) { | 
|  | err = mmc_blk_fix_state(card, req); | 
|  | if (err) | 
|  | goto error_exit; | 
|  | } | 
|  |  | 
|  | if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES) | 
|  | continue; | 
|  |  | 
|  | retries = 0; | 
|  |  | 
|  | if (mrq->cmd->error || | 
|  | mrq->data->error || | 
|  | (!mmc_host_is_spi(host) && | 
|  | (mrq->cmd->resp[0] & CMD_ERRORS || status & CMD_ERRORS))) | 
|  | error = BLK_STS_IOERR; | 
|  | else | 
|  | error = BLK_STS_OK; | 
|  |  | 
|  | } while (blk_update_request(req, error, 512)); | 
|  |  | 
|  | return; | 
|  |  | 
|  | error_exit: | 
|  | mrq->data->bytes_xfered = 0; | 
|  | blk_update_request(req, BLK_STS_IOERR, 512); | 
|  | /* Let it try the remaining request again */ | 
|  | if (mqrq->retries > MMC_MAX_RETRIES - 1) | 
|  | mqrq->retries = MMC_MAX_RETRIES - 1; | 
|  | } | 
|  |  | 
|  | static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq) | 
|  | { | 
|  | return !!brq->mrq.sbc; | 
|  | } | 
|  |  | 
|  | static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq) | 
|  | { | 
|  | return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for errors the host controller driver might not have seen such as | 
|  | * response mode errors or invalid card state. | 
|  | */ | 
|  | static bool mmc_blk_status_error(struct request *req, u32 status) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  | struct mmc_queue *mq = req->q->queuedata; | 
|  | u32 stop_err_bits; | 
|  |  | 
|  | if (mmc_host_is_spi(mq->card->host)) | 
|  | return false; | 
|  |  | 
|  | stop_err_bits = mmc_blk_stop_err_bits(brq); | 
|  |  | 
|  | return brq->cmd.resp[0]  & CMD_ERRORS    || | 
|  | brq->stop.resp[0] & stop_err_bits || | 
|  | status            & stop_err_bits || | 
|  | (rq_data_dir(req) == WRITE && !mmc_blk_in_tran_state(status)); | 
|  | } | 
|  |  | 
|  | static inline bool mmc_blk_cmd_started(struct mmc_blk_request *brq) | 
|  | { | 
|  | return !brq->sbc.error && !brq->cmd.error && | 
|  | !(brq->cmd.resp[0] & CMD_ERRORS); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Requests are completed by mmc_blk_mq_complete_rq() which sets simple | 
|  | * policy: | 
|  | * 1. A request that has transferred at least some data is considered | 
|  | * successful and will be requeued if there is remaining data to | 
|  | * transfer. | 
|  | * 2. Otherwise the number of retries is incremented and the request | 
|  | * will be requeued if there are remaining retries. | 
|  | * 3. Otherwise the request will be errored out. | 
|  | * That means mmc_blk_mq_complete_rq() is controlled by bytes_xfered and | 
|  | * mqrq->retries. So there are only 4 possible actions here: | 
|  | *	1. do not accept the bytes_xfered value i.e. set it to zero | 
|  | *	2. change mqrq->retries to determine the number of retries | 
|  | *	3. try to reset the card | 
|  | *	4. read one sector at a time | 
|  | */ | 
|  | static void mmc_blk_mq_rw_recovery(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_blk_request *brq = &mqrq->brq; | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = mq->card; | 
|  | u32 status; | 
|  | u32 blocks; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * Some errors the host driver might not have seen. Set the number of | 
|  | * bytes transferred to zero in that case. | 
|  | */ | 
|  | err = __mmc_send_status(card, &status, 0); | 
|  | if (err || mmc_blk_status_error(req, status)) | 
|  | brq->data.bytes_xfered = 0; | 
|  |  | 
|  | mmc_retune_release(card->host); | 
|  |  | 
|  | /* | 
|  | * Try again to get the status. This also provides an opportunity for | 
|  | * re-tuning. | 
|  | */ | 
|  | if (err) | 
|  | err = __mmc_send_status(card, &status, 0); | 
|  |  | 
|  | /* | 
|  | * Nothing more to do after the number of bytes transferred has been | 
|  | * updated and there is no card. | 
|  | */ | 
|  | if (err && mmc_detect_card_removed(card->host)) | 
|  | return; | 
|  |  | 
|  | /* Try to get back to "tran" state */ | 
|  | if (!mmc_host_is_spi(mq->card->host) && | 
|  | (err || !mmc_blk_in_tran_state(status))) | 
|  | err = mmc_blk_fix_state(mq->card, req); | 
|  |  | 
|  | /* | 
|  | * Special case for SD cards where the card might record the number of | 
|  | * blocks written. | 
|  | */ | 
|  | if (!err && mmc_blk_cmd_started(brq) && mmc_card_sd(card) && | 
|  | rq_data_dir(req) == WRITE) { | 
|  | if (mmc_sd_num_wr_blocks(card, &blocks)) | 
|  | brq->data.bytes_xfered = 0; | 
|  | else | 
|  | brq->data.bytes_xfered = blocks << 9; | 
|  | } | 
|  |  | 
|  | /* Reset if the card is in a bad state */ | 
|  | if (!mmc_host_is_spi(mq->card->host) && | 
|  | err && mmc_blk_reset(md, card->host, type)) { | 
|  | pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); | 
|  | mqrq->retries = MMC_NO_RETRIES; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If anything was done, just return and if there is anything remaining | 
|  | * on the request it will get requeued. | 
|  | */ | 
|  | if (brq->data.bytes_xfered) | 
|  | return; | 
|  |  | 
|  | /* Reset before last retry */ | 
|  | if (mqrq->retries + 1 == MMC_MAX_RETRIES) | 
|  | mmc_blk_reset(md, card->host, type); | 
|  |  | 
|  | /* Command errors fail fast, so use all MMC_MAX_RETRIES */ | 
|  | if (brq->sbc.error || brq->cmd.error) | 
|  | return; | 
|  |  | 
|  | /* Reduce the remaining retries for data errors */ | 
|  | if (mqrq->retries < MMC_MAX_RETRIES - MMC_DATA_RETRIES) { | 
|  | mqrq->retries = MMC_MAX_RETRIES - MMC_DATA_RETRIES; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* FIXME: Missing single sector read for large sector size */ | 
|  | if (!mmc_large_sector(card) && rq_data_dir(req) == READ && | 
|  | brq->data.blocks > 1) { | 
|  | /* Read one sector at a time */ | 
|  | mmc_blk_read_single(mq, req); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq) | 
|  | { | 
|  | mmc_blk_eval_resp_error(brq); | 
|  |  | 
|  | return brq->sbc.error || brq->cmd.error || brq->stop.error || | 
|  | brq->data.error || brq->cmd.resp[0] & CMD_ERRORS; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_card_busy(struct mmc_card *card, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | u32 status = 0; | 
|  | int err; | 
|  |  | 
|  | if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ) | 
|  | return 0; | 
|  |  | 
|  | err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, req, &status); | 
|  |  | 
|  | /* | 
|  | * Do not assume data transferred correctly if there are any error bits | 
|  | * set. | 
|  | */ | 
|  | if (status & mmc_blk_stop_err_bits(&mqrq->brq)) { | 
|  | mqrq->brq.data.bytes_xfered = 0; | 
|  | err = err ? err : -EIO; | 
|  | } | 
|  |  | 
|  | /* Copy the exception bit so it will be seen later on */ | 
|  | if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT) | 
|  | mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static inline void mmc_blk_rw_reset_success(struct mmc_queue *mq, | 
|  | struct request *req) | 
|  | { | 
|  | int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; | 
|  |  | 
|  | mmc_blk_reset_success(mq->blkdata, type); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_complete_rq(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | unsigned int nr_bytes = mqrq->brq.data.bytes_xfered; | 
|  |  | 
|  | if (nr_bytes) { | 
|  | if (blk_update_request(req, BLK_STS_OK, nr_bytes)) | 
|  | blk_mq_requeue_request(req, true); | 
|  | else | 
|  | __blk_mq_end_request(req, BLK_STS_OK); | 
|  | } else if (!blk_rq_bytes(req)) { | 
|  | __blk_mq_end_request(req, BLK_STS_IOERR); | 
|  | } else if (mqrq->retries++ < MMC_MAX_RETRIES) { | 
|  | blk_mq_requeue_request(req, true); | 
|  | } else { | 
|  | if (mmc_card_removed(mq->card)) | 
|  | req->rq_flags |= RQF_QUIET; | 
|  | blk_mq_end_request(req, BLK_STS_IOERR); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool mmc_blk_urgent_bkops_needed(struct mmc_queue *mq, | 
|  | struct mmc_queue_req *mqrq) | 
|  | { | 
|  | return mmc_card_mmc(mq->card) && !mmc_host_is_spi(mq->card->host) && | 
|  | (mqrq->brq.cmd.resp[0] & R1_EXCEPTION_EVENT || | 
|  | mqrq->brq.stop.resp[0] & R1_EXCEPTION_EVENT); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_urgent_bkops(struct mmc_queue *mq, | 
|  | struct mmc_queue_req *mqrq) | 
|  | { | 
|  | if (mmc_blk_urgent_bkops_needed(mq, mqrq)) | 
|  | mmc_run_bkops(mq->card); | 
|  | } | 
|  |  | 
|  | void mmc_blk_mq_complete(struct request *req) | 
|  | { | 
|  | struct mmc_queue *mq = req->q->queuedata; | 
|  |  | 
|  | if (mq->use_cqe) | 
|  | mmc_blk_cqe_complete_rq(mq, req); | 
|  | else | 
|  | mmc_blk_mq_complete_rq(mq, req); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_poll_completion(struct mmc_queue *mq, | 
|  | struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_host *host = mq->card->host; | 
|  |  | 
|  | if (mmc_blk_rq_error(&mqrq->brq) || | 
|  | mmc_blk_card_busy(mq->card, req)) { | 
|  | mmc_blk_mq_rw_recovery(mq, req); | 
|  | } else { | 
|  | mmc_blk_rw_reset_success(mq, req); | 
|  | mmc_retune_release(host); | 
|  | } | 
|  |  | 
|  | mmc_blk_urgent_bkops(mq, mqrq); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_dec_in_flight(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | unsigned long flags; | 
|  | bool put_card; | 
|  |  | 
|  | spin_lock_irqsave(&mq->lock, flags); | 
|  |  | 
|  | mq->in_flight[mmc_issue_type(mq, req)] -= 1; | 
|  |  | 
|  | put_card = (mmc_tot_in_flight(mq) == 0); | 
|  |  | 
|  | spin_unlock_irqrestore(&mq->lock, flags); | 
|  |  | 
|  | if (put_card) | 
|  | mmc_put_card(mq->card, &mq->ctx); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_post_req(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_request *mrq = &mqrq->brq.mrq; | 
|  | struct mmc_host *host = mq->card->host; | 
|  |  | 
|  | mmc_post_req(host, mrq, 0); | 
|  |  | 
|  | /* | 
|  | * Block layer timeouts race with completions which means the normal | 
|  | * completion path cannot be used during recovery. | 
|  | */ | 
|  | if (mq->in_recovery) | 
|  | mmc_blk_mq_complete_rq(mq, req); | 
|  | else | 
|  | blk_mq_complete_request(req); | 
|  |  | 
|  | mmc_blk_mq_dec_in_flight(mq, req); | 
|  | } | 
|  |  | 
|  | void mmc_blk_mq_recovery(struct mmc_queue *mq) | 
|  | { | 
|  | struct request *req = mq->recovery_req; | 
|  | struct mmc_host *host = mq->card->host; | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  |  | 
|  | mq->recovery_req = NULL; | 
|  | mq->rw_wait = false; | 
|  |  | 
|  | if (mmc_blk_rq_error(&mqrq->brq)) { | 
|  | mmc_retune_hold_now(host); | 
|  | mmc_blk_mq_rw_recovery(mq, req); | 
|  | } | 
|  |  | 
|  | mmc_blk_urgent_bkops(mq, mqrq); | 
|  |  | 
|  | mmc_blk_mq_post_req(mq, req); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_complete_prev_req(struct mmc_queue *mq, | 
|  | struct request **prev_req) | 
|  | { | 
|  | if (mmc_host_done_complete(mq->card->host)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&mq->complete_lock); | 
|  |  | 
|  | if (!mq->complete_req) | 
|  | goto out_unlock; | 
|  |  | 
|  | mmc_blk_mq_poll_completion(mq, mq->complete_req); | 
|  |  | 
|  | if (prev_req) | 
|  | *prev_req = mq->complete_req; | 
|  | else | 
|  | mmc_blk_mq_post_req(mq, mq->complete_req); | 
|  |  | 
|  | mq->complete_req = NULL; | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&mq->complete_lock); | 
|  | } | 
|  |  | 
|  | void mmc_blk_mq_complete_work(struct work_struct *work) | 
|  | { | 
|  | struct mmc_queue *mq = container_of(work, struct mmc_queue, | 
|  | complete_work); | 
|  |  | 
|  | mmc_blk_mq_complete_prev_req(mq, NULL); | 
|  | } | 
|  |  | 
|  | static void mmc_blk_mq_req_done(struct mmc_request *mrq) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, | 
|  | brq.mrq); | 
|  | struct request *req = mmc_queue_req_to_req(mqrq); | 
|  | struct request_queue *q = req->q; | 
|  | struct mmc_queue *mq = q->queuedata; | 
|  | struct mmc_host *host = mq->card->host; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!mmc_host_done_complete(host)) { | 
|  | bool waiting; | 
|  |  | 
|  | /* | 
|  | * We cannot complete the request in this context, so record | 
|  | * that there is a request to complete, and that a following | 
|  | * request does not need to wait (although it does need to | 
|  | * complete complete_req first). | 
|  | */ | 
|  | spin_lock_irqsave(&mq->lock, flags); | 
|  | mq->complete_req = req; | 
|  | mq->rw_wait = false; | 
|  | waiting = mq->waiting; | 
|  | spin_unlock_irqrestore(&mq->lock, flags); | 
|  |  | 
|  | /* | 
|  | * If 'waiting' then the waiting task will complete this | 
|  | * request, otherwise queue a work to do it. Note that | 
|  | * complete_work may still race with the dispatch of a following | 
|  | * request. | 
|  | */ | 
|  | if (waiting) | 
|  | wake_up(&mq->wait); | 
|  | else | 
|  | queue_work(mq->card->complete_wq, &mq->complete_work); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Take the recovery path for errors or urgent background operations */ | 
|  | if (mmc_blk_rq_error(&mqrq->brq) || | 
|  | mmc_blk_urgent_bkops_needed(mq, mqrq)) { | 
|  | spin_lock_irqsave(&mq->lock, flags); | 
|  | mq->recovery_needed = true; | 
|  | mq->recovery_req = req; | 
|  | spin_unlock_irqrestore(&mq->lock, flags); | 
|  | wake_up(&mq->wait); | 
|  | schedule_work(&mq->recovery_work); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mmc_blk_rw_reset_success(mq, req); | 
|  |  | 
|  | mq->rw_wait = false; | 
|  | wake_up(&mq->wait); | 
|  |  | 
|  | mmc_blk_mq_post_req(mq, req); | 
|  | } | 
|  |  | 
|  | static bool mmc_blk_rw_wait_cond(struct mmc_queue *mq, int *err) | 
|  | { | 
|  | unsigned long flags; | 
|  | bool done; | 
|  |  | 
|  | /* | 
|  | * Wait while there is another request in progress, but not if recovery | 
|  | * is needed. Also indicate whether there is a request waiting to start. | 
|  | */ | 
|  | spin_lock_irqsave(&mq->lock, flags); | 
|  | if (mq->recovery_needed) { | 
|  | *err = -EBUSY; | 
|  | done = true; | 
|  | } else { | 
|  | done = !mq->rw_wait; | 
|  | } | 
|  | mq->waiting = !done; | 
|  | spin_unlock_irqrestore(&mq->lock, flags); | 
|  |  | 
|  | return done; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_rw_wait(struct mmc_queue *mq, struct request **prev_req) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | wait_event(mq->wait, mmc_blk_rw_wait_cond(mq, &err)); | 
|  |  | 
|  | /* Always complete the previous request if there is one */ | 
|  | mmc_blk_mq_complete_prev_req(mq, prev_req); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq, | 
|  | struct request *req) | 
|  | { | 
|  | struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); | 
|  | struct mmc_host *host = mq->card->host; | 
|  | struct request *prev_req = NULL; | 
|  | int err = 0; | 
|  |  | 
|  | mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); | 
|  |  | 
|  | mqrq->brq.mrq.done = mmc_blk_mq_req_done; | 
|  |  | 
|  | mmc_pre_req(host, &mqrq->brq.mrq); | 
|  |  | 
|  | err = mmc_blk_rw_wait(mq, &prev_req); | 
|  | if (err) | 
|  | goto out_post_req; | 
|  |  | 
|  | mq->rw_wait = true; | 
|  |  | 
|  | err = mmc_start_request(host, &mqrq->brq.mrq); | 
|  |  | 
|  | if (prev_req) | 
|  | mmc_blk_mq_post_req(mq, prev_req); | 
|  |  | 
|  | if (err) | 
|  | mq->rw_wait = false; | 
|  |  | 
|  | /* Release re-tuning here where there is no synchronization required */ | 
|  | if (err || mmc_host_done_complete(host)) | 
|  | mmc_retune_release(host); | 
|  |  | 
|  | out_post_req: | 
|  | if (err) | 
|  | mmc_post_req(host, &mqrq->brq.mrq, err); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host) | 
|  | { | 
|  | if (mq->use_cqe) | 
|  | return host->cqe_ops->cqe_wait_for_idle(host); | 
|  |  | 
|  | return mmc_blk_rw_wait(mq, NULL); | 
|  | } | 
|  |  | 
|  | enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req) | 
|  | { | 
|  | struct mmc_blk_data *md = mq->blkdata; | 
|  | struct mmc_card *card = md->queue.card; | 
|  | struct mmc_host *host = card->host; | 
|  | int ret; | 
|  |  | 
|  | ret = mmc_blk_part_switch(card, md->part_type); | 
|  | if (ret) | 
|  | return MMC_REQ_FAILED_TO_START; | 
|  |  | 
|  | switch (mmc_issue_type(mq, req)) { | 
|  | case MMC_ISSUE_SYNC: | 
|  | ret = mmc_blk_wait_for_idle(mq, host); | 
|  | if (ret) | 
|  | return MMC_REQ_BUSY; | 
|  | switch (req_op(req)) { | 
|  | case REQ_OP_DRV_IN: | 
|  | case REQ_OP_DRV_OUT: | 
|  | mmc_blk_issue_drv_op(mq, req); | 
|  | break; | 
|  | case REQ_OP_DISCARD: | 
|  | mmc_blk_issue_discard_rq(mq, req); | 
|  | break; | 
|  | case REQ_OP_SECURE_ERASE: | 
|  | mmc_blk_issue_secdiscard_rq(mq, req); | 
|  | break; | 
|  | case REQ_OP_FLUSH: | 
|  | mmc_blk_issue_flush(mq, req); | 
|  | break; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | return MMC_REQ_FAILED_TO_START; | 
|  | } | 
|  | return MMC_REQ_FINISHED; | 
|  | case MMC_ISSUE_DCMD: | 
|  | case MMC_ISSUE_ASYNC: | 
|  | switch (req_op(req)) { | 
|  | case REQ_OP_FLUSH: | 
|  | ret = mmc_blk_cqe_issue_flush(mq, req); | 
|  | break; | 
|  | case REQ_OP_READ: | 
|  | case REQ_OP_WRITE: | 
|  | if (mq->use_cqe) | 
|  | ret = mmc_blk_cqe_issue_rw_rq(mq, req); | 
|  | else | 
|  | ret = mmc_blk_mq_issue_rw_rq(mq, req); | 
|  | break; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | ret = -EINVAL; | 
|  | } | 
|  | if (!ret) | 
|  | return MMC_REQ_STARTED; | 
|  | return ret == -EBUSY ? MMC_REQ_BUSY : MMC_REQ_FAILED_TO_START; | 
|  | default: | 
|  | WARN_ON_ONCE(1); | 
|  | return MMC_REQ_FAILED_TO_START; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int mmc_blk_readonly(struct mmc_card *card) | 
|  | { | 
|  | return mmc_card_readonly(card) || | 
|  | !(card->csd.cmdclass & CCC_BLOCK_WRITE); | 
|  | } | 
|  |  | 
|  | static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, | 
|  | struct device *parent, | 
|  | sector_t size, | 
|  | bool default_ro, | 
|  | const char *subname, | 
|  | int area_type) | 
|  | { | 
|  | struct mmc_blk_data *md; | 
|  | int devidx, ret; | 
|  |  | 
|  | devidx = ida_simple_get(&mmc_blk_ida, 0, max_devices, GFP_KERNEL); | 
|  | if (devidx < 0) { | 
|  | /* | 
|  | * We get -ENOSPC because there are no more any available | 
|  | * devidx. The reason may be that, either userspace haven't yet | 
|  | * unmounted the partitions, which postpones mmc_blk_release() | 
|  | * from being called, or the device has more partitions than | 
|  | * what we support. | 
|  | */ | 
|  | if (devidx == -ENOSPC) | 
|  | dev_err(mmc_dev(card->host), | 
|  | "no more device IDs available\n"); | 
|  |  | 
|  | return ERR_PTR(devidx); | 
|  | } | 
|  |  | 
|  | md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); | 
|  | if (!md) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | md->area_type = area_type; | 
|  |  | 
|  | /* | 
|  | * Set the read-only status based on the supported commands | 
|  | * and the write protect switch. | 
|  | */ | 
|  | md->read_only = mmc_blk_readonly(card); | 
|  |  | 
|  | md->disk = alloc_disk(perdev_minors); | 
|  | if (md->disk == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto err_kfree; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&md->part); | 
|  | INIT_LIST_HEAD(&md->rpmbs); | 
|  | md->usage = 1; | 
|  |  | 
|  | ret = mmc_init_queue(&md->queue, card); | 
|  | if (ret) | 
|  | goto err_putdisk; | 
|  |  | 
|  | md->queue.blkdata = md; | 
|  |  | 
|  | /* | 
|  | * Keep an extra reference to the queue so that we can shutdown the | 
|  | * queue (i.e. call blk_cleanup_queue()) while there are still | 
|  | * references to the 'md'. The corresponding blk_put_queue() is in | 
|  | * mmc_blk_put(). | 
|  | */ | 
|  | if (!blk_get_queue(md->queue.queue)) { | 
|  | mmc_cleanup_queue(&md->queue); | 
|  | ret = -ENODEV; | 
|  | goto err_putdisk; | 
|  | } | 
|  |  | 
|  | md->disk->major	= MMC_BLOCK_MAJOR; | 
|  | md->disk->first_minor = devidx * perdev_minors; | 
|  | md->disk->fops = &mmc_bdops; | 
|  | md->disk->private_data = md; | 
|  | md->disk->queue = md->queue.queue; | 
|  | md->parent = parent; | 
|  | set_disk_ro(md->disk, md->read_only || default_ro); | 
|  | md->disk->flags = GENHD_FL_EXT_DEVT; | 
|  | if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT)) | 
|  | md->disk->flags |= GENHD_FL_NO_PART_SCAN | 
|  | | GENHD_FL_SUPPRESS_PARTITION_INFO; | 
|  |  | 
|  | /* | 
|  | * As discussed on lkml, GENHD_FL_REMOVABLE should: | 
|  | * | 
|  | * - be set for removable media with permanent block devices | 
|  | * - be unset for removable block devices with permanent media | 
|  | * | 
|  | * Since MMC block devices clearly fall under the second | 
|  | * case, we do not set GENHD_FL_REMOVABLE.  Userspace | 
|  | * should use the block device creation/destruction hotplug | 
|  | * messages to tell when the card is present. | 
|  | */ | 
|  |  | 
|  | snprintf(md->disk->disk_name, sizeof(md->disk->disk_name), | 
|  | "mmcblk%u%s", card->host->index, subname ? subname : ""); | 
|  |  | 
|  | set_capacity(md->disk, size); | 
|  |  | 
|  | if (mmc_host_cmd23(card->host)) { | 
|  | if ((mmc_card_mmc(card) && | 
|  | card->csd.mmca_vsn >= CSD_SPEC_VER_3) || | 
|  | (mmc_card_sd(card) && | 
|  | card->scr.cmds & SD_SCR_CMD23_SUPPORT)) | 
|  | md->flags |= MMC_BLK_CMD23; | 
|  | } | 
|  |  | 
|  | if (mmc_card_mmc(card) && | 
|  | md->flags & MMC_BLK_CMD23 && | 
|  | ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) || | 
|  | card->ext_csd.rel_sectors)) { | 
|  | md->flags |= MMC_BLK_REL_WR; | 
|  | blk_queue_write_cache(md->queue.queue, true, true); | 
|  | } | 
|  |  | 
|  | return md; | 
|  |  | 
|  | err_putdisk: | 
|  | put_disk(md->disk); | 
|  | err_kfree: | 
|  | kfree(md); | 
|  | out: | 
|  | ida_simple_remove(&mmc_blk_ida, devidx); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) | 
|  | { | 
|  | sector_t size; | 
|  |  | 
|  | if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { | 
|  | /* | 
|  | * The EXT_CSD sector count is in number or 512 byte | 
|  | * sectors. | 
|  | */ | 
|  | size = card->ext_csd.sectors; | 
|  | } else { | 
|  | /* | 
|  | * The CSD capacity field is in units of read_blkbits. | 
|  | * set_capacity takes units of 512 bytes. | 
|  | */ | 
|  | size = (typeof(sector_t))card->csd.capacity | 
|  | << (card->csd.read_blkbits - 9); | 
|  | } | 
|  |  | 
|  | return mmc_blk_alloc_req(card, &card->dev, size, false, NULL, | 
|  | MMC_BLK_DATA_AREA_MAIN); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_alloc_part(struct mmc_card *card, | 
|  | struct mmc_blk_data *md, | 
|  | unsigned int part_type, | 
|  | sector_t size, | 
|  | bool default_ro, | 
|  | const char *subname, | 
|  | int area_type) | 
|  | { | 
|  | char cap_str[10]; | 
|  | struct mmc_blk_data *part_md; | 
|  |  | 
|  | part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro, | 
|  | subname, area_type); | 
|  | if (IS_ERR(part_md)) | 
|  | return PTR_ERR(part_md); | 
|  | part_md->part_type = part_type; | 
|  | list_add(&part_md->part, &md->part); | 
|  |  | 
|  | string_get_size((u64)get_capacity(part_md->disk), 512, STRING_UNITS_2, | 
|  | cap_str, sizeof(cap_str)); | 
|  | pr_info("%s: %s %s partition %u %s\n", | 
|  | part_md->disk->disk_name, mmc_card_id(card), | 
|  | mmc_card_name(card), part_md->part_type, cap_str); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mmc_rpmb_ioctl() - ioctl handler for the RPMB chardev | 
|  | * @filp: the character device file | 
|  | * @cmd: the ioctl() command | 
|  | * @arg: the argument from userspace | 
|  | * | 
|  | * This will essentially just redirect the ioctl()s coming in over to | 
|  | * the main block device spawning the RPMB character device. | 
|  | */ | 
|  | static long mmc_rpmb_ioctl(struct file *filp, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | struct mmc_rpmb_data *rpmb = filp->private_data; | 
|  | int ret; | 
|  |  | 
|  | switch (cmd) { | 
|  | case MMC_IOC_CMD: | 
|  | ret = mmc_blk_ioctl_cmd(rpmb->md, | 
|  | (struct mmc_ioc_cmd __user *)arg, | 
|  | rpmb); | 
|  | break; | 
|  | case MMC_IOC_MULTI_CMD: | 
|  | ret = mmc_blk_ioctl_multi_cmd(rpmb->md, | 
|  | (struct mmc_ioc_multi_cmd __user *)arg, | 
|  | rpmb); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_COMPAT | 
|  | static long mmc_rpmb_ioctl_compat(struct file *filp, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | return mmc_rpmb_ioctl(filp, cmd, (unsigned long)compat_ptr(arg)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, | 
|  | struct mmc_rpmb_data, chrdev); | 
|  |  | 
|  | get_device(&rpmb->dev); | 
|  | filp->private_data = rpmb; | 
|  | mmc_blk_get(rpmb->md->disk); | 
|  |  | 
|  | return nonseekable_open(inode, filp); | 
|  | } | 
|  |  | 
|  | static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, | 
|  | struct mmc_rpmb_data, chrdev); | 
|  |  | 
|  | put_device(&rpmb->dev); | 
|  | mmc_blk_put(rpmb->md); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct file_operations mmc_rpmb_fileops = { | 
|  | .release = mmc_rpmb_chrdev_release, | 
|  | .open = mmc_rpmb_chrdev_open, | 
|  | .owner = THIS_MODULE, | 
|  | .llseek = no_llseek, | 
|  | .unlocked_ioctl = mmc_rpmb_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl = mmc_rpmb_ioctl_compat, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static void mmc_blk_rpmb_device_release(struct device *dev) | 
|  | { | 
|  | struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev); | 
|  |  | 
|  | ida_simple_remove(&mmc_rpmb_ida, rpmb->id); | 
|  | kfree(rpmb); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, | 
|  | struct mmc_blk_data *md, | 
|  | unsigned int part_index, | 
|  | sector_t size, | 
|  | const char *subname) | 
|  | { | 
|  | int devidx, ret; | 
|  | char rpmb_name[DISK_NAME_LEN]; | 
|  | char cap_str[10]; | 
|  | struct mmc_rpmb_data *rpmb; | 
|  |  | 
|  | /* This creates the minor number for the RPMB char device */ | 
|  | devidx = ida_simple_get(&mmc_rpmb_ida, 0, max_devices, GFP_KERNEL); | 
|  | if (devidx < 0) | 
|  | return devidx; | 
|  |  | 
|  | rpmb = kzalloc(sizeof(*rpmb), GFP_KERNEL); | 
|  | if (!rpmb) { | 
|  | ida_simple_remove(&mmc_rpmb_ida, devidx); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | snprintf(rpmb_name, sizeof(rpmb_name), | 
|  | "mmcblk%u%s", card->host->index, subname ? subname : ""); | 
|  |  | 
|  | rpmb->id = devidx; | 
|  | rpmb->part_index = part_index; | 
|  | rpmb->dev.init_name = rpmb_name; | 
|  | rpmb->dev.bus = &mmc_rpmb_bus_type; | 
|  | rpmb->dev.devt = MKDEV(MAJOR(mmc_rpmb_devt), rpmb->id); | 
|  | rpmb->dev.parent = &card->dev; | 
|  | rpmb->dev.release = mmc_blk_rpmb_device_release; | 
|  | device_initialize(&rpmb->dev); | 
|  | dev_set_drvdata(&rpmb->dev, rpmb); | 
|  | rpmb->md = md; | 
|  |  | 
|  | cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops); | 
|  | rpmb->chrdev.owner = THIS_MODULE; | 
|  | ret = cdev_device_add(&rpmb->chrdev, &rpmb->dev); | 
|  | if (ret) { | 
|  | pr_err("%s: could not add character device\n", rpmb_name); | 
|  | goto out_put_device; | 
|  | } | 
|  |  | 
|  | list_add(&rpmb->node, &md->rpmbs); | 
|  |  | 
|  | string_get_size((u64)size, 512, STRING_UNITS_2, | 
|  | cap_str, sizeof(cap_str)); | 
|  |  | 
|  | pr_info("%s: %s %s partition %u %s, chardev (%d:%d)\n", | 
|  | rpmb_name, mmc_card_id(card), | 
|  | mmc_card_name(card), EXT_CSD_PART_CONFIG_ACC_RPMB, cap_str, | 
|  | MAJOR(mmc_rpmb_devt), rpmb->id); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_put_device: | 
|  | put_device(&rpmb->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove_rpmb_part(struct mmc_rpmb_data *rpmb) | 
|  |  | 
|  | { | 
|  | cdev_device_del(&rpmb->chrdev, &rpmb->dev); | 
|  | put_device(&rpmb->dev); | 
|  | } | 
|  |  | 
|  | /* MMC Physical partitions consist of two boot partitions and | 
|  | * up to four general purpose partitions. | 
|  | * For each partition enabled in EXT_CSD a block device will be allocatedi | 
|  | * to provide access to the partition. | 
|  | */ | 
|  |  | 
|  | static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md) | 
|  | { | 
|  | int idx, ret; | 
|  |  | 
|  | if (!mmc_card_mmc(card)) | 
|  | return 0; | 
|  |  | 
|  | for (idx = 0; idx < card->nr_parts; idx++) { | 
|  | if (card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB) { | 
|  | /* | 
|  | * RPMB partitions does not provide block access, they | 
|  | * are only accessed using ioctl():s. Thus create | 
|  | * special RPMB block devices that do not have a | 
|  | * backing block queue for these. | 
|  | */ | 
|  | ret = mmc_blk_alloc_rpmb_part(card, md, | 
|  | card->part[idx].part_cfg, | 
|  | card->part[idx].size >> 9, | 
|  | card->part[idx].name); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else if (card->part[idx].size) { | 
|  | ret = mmc_blk_alloc_part(card, md, | 
|  | card->part[idx].part_cfg, | 
|  | card->part[idx].size >> 9, | 
|  | card->part[idx].force_ro, | 
|  | card->part[idx].name, | 
|  | card->part[idx].area_type); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove_req(struct mmc_blk_data *md) | 
|  | { | 
|  | struct mmc_card *card; | 
|  |  | 
|  | if (md) { | 
|  | /* | 
|  | * Flush remaining requests and free queues. It | 
|  | * is freeing the queue that stops new requests | 
|  | * from being accepted. | 
|  | */ | 
|  | card = md->queue.card; | 
|  | if (md->disk->flags & GENHD_FL_UP) { | 
|  | device_remove_file(disk_to_dev(md->disk), &md->force_ro); | 
|  | if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && | 
|  | card->ext_csd.boot_ro_lockable) | 
|  | device_remove_file(disk_to_dev(md->disk), | 
|  | &md->power_ro_lock); | 
|  |  | 
|  | del_gendisk(md->disk); | 
|  | } | 
|  | mmc_cleanup_queue(&md->queue); | 
|  | mmc_blk_put(md); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove_parts(struct mmc_card *card, | 
|  | struct mmc_blk_data *md) | 
|  | { | 
|  | struct list_head *pos, *q; | 
|  | struct mmc_blk_data *part_md; | 
|  | struct mmc_rpmb_data *rpmb; | 
|  |  | 
|  | /* Remove RPMB partitions */ | 
|  | list_for_each_safe(pos, q, &md->rpmbs) { | 
|  | rpmb = list_entry(pos, struct mmc_rpmb_data, node); | 
|  | list_del(pos); | 
|  | mmc_blk_remove_rpmb_part(rpmb); | 
|  | } | 
|  | /* Remove block partitions */ | 
|  | list_for_each_safe(pos, q, &md->part) { | 
|  | part_md = list_entry(pos, struct mmc_blk_data, part); | 
|  | list_del(pos); | 
|  | mmc_blk_remove_req(part_md); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int mmc_add_disk(struct mmc_blk_data *md) | 
|  | { | 
|  | int ret; | 
|  | struct mmc_card *card = md->queue.card; | 
|  |  | 
|  | device_add_disk(md->parent, md->disk, NULL); | 
|  | md->force_ro.show = force_ro_show; | 
|  | md->force_ro.store = force_ro_store; | 
|  | sysfs_attr_init(&md->force_ro.attr); | 
|  | md->force_ro.attr.name = "force_ro"; | 
|  | md->force_ro.attr.mode = S_IRUGO | S_IWUSR; | 
|  | ret = device_create_file(disk_to_dev(md->disk), &md->force_ro); | 
|  | if (ret) | 
|  | goto force_ro_fail; | 
|  |  | 
|  | if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && | 
|  | card->ext_csd.boot_ro_lockable) { | 
|  | umode_t mode; | 
|  |  | 
|  | if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS) | 
|  | mode = S_IRUGO; | 
|  | else | 
|  | mode = S_IRUGO | S_IWUSR; | 
|  |  | 
|  | md->power_ro_lock.show = power_ro_lock_show; | 
|  | md->power_ro_lock.store = power_ro_lock_store; | 
|  | sysfs_attr_init(&md->power_ro_lock.attr); | 
|  | md->power_ro_lock.attr.mode = mode; | 
|  | md->power_ro_lock.attr.name = | 
|  | "ro_lock_until_next_power_on"; | 
|  | ret = device_create_file(disk_to_dev(md->disk), | 
|  | &md->power_ro_lock); | 
|  | if (ret) | 
|  | goto power_ro_lock_fail; | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | power_ro_lock_fail: | 
|  | device_remove_file(disk_to_dev(md->disk), &md->force_ro); | 
|  | force_ro_fail: | 
|  | del_gendisk(md->disk); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  |  | 
|  | static int mmc_dbg_card_status_get(void *data, u64 *val) | 
|  | { | 
|  | struct mmc_card *card = data; | 
|  | struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
|  | struct mmc_queue *mq = &md->queue; | 
|  | struct request *req; | 
|  | int ret; | 
|  |  | 
|  | /* Ask the block layer about the card status */ | 
|  | req = blk_get_request(mq->queue, REQ_OP_DRV_IN, 0); | 
|  | if (IS_ERR(req)) | 
|  | return PTR_ERR(req); | 
|  | req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_CARD_STATUS; | 
|  | blk_execute_rq(mq->queue, NULL, req, 0); | 
|  | ret = req_to_mmc_queue_req(req)->drv_op_result; | 
|  | if (ret >= 0) { | 
|  | *val = ret; | 
|  | ret = 0; | 
|  | } | 
|  | blk_put_request(req); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | DEFINE_DEBUGFS_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, | 
|  | NULL, "%08llx\n"); | 
|  |  | 
|  | /* That is two digits * 512 + 1 for newline */ | 
|  | #define EXT_CSD_STR_LEN 1025 | 
|  |  | 
|  | static int mmc_ext_csd_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct mmc_card *card = inode->i_private; | 
|  | struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
|  | struct mmc_queue *mq = &md->queue; | 
|  | struct request *req; | 
|  | char *buf; | 
|  | ssize_t n = 0; | 
|  | u8 *ext_csd; | 
|  | int err, i; | 
|  |  | 
|  | buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Ask the block layer for the EXT CSD */ | 
|  | req = blk_get_request(mq->queue, REQ_OP_DRV_IN, 0); | 
|  | if (IS_ERR(req)) { | 
|  | err = PTR_ERR(req); | 
|  | goto out_free; | 
|  | } | 
|  | req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_EXT_CSD; | 
|  | req_to_mmc_queue_req(req)->drv_op_data = &ext_csd; | 
|  | blk_execute_rq(mq->queue, NULL, req, 0); | 
|  | err = req_to_mmc_queue_req(req)->drv_op_result; | 
|  | blk_put_request(req); | 
|  | if (err) { | 
|  | pr_err("FAILED %d\n", err); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 512; i++) | 
|  | n += sprintf(buf + n, "%02x", ext_csd[i]); | 
|  | n += sprintf(buf + n, "\n"); | 
|  |  | 
|  | if (n != EXT_CSD_STR_LEN) { | 
|  | err = -EINVAL; | 
|  | kfree(ext_csd); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | filp->private_data = buf; | 
|  | kfree(ext_csd); | 
|  | return 0; | 
|  |  | 
|  | out_free: | 
|  | kfree(buf); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf, | 
|  | size_t cnt, loff_t *ppos) | 
|  | { | 
|  | char *buf = filp->private_data; | 
|  |  | 
|  | return simple_read_from_buffer(ubuf, cnt, ppos, | 
|  | buf, EXT_CSD_STR_LEN); | 
|  | } | 
|  |  | 
|  | static int mmc_ext_csd_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | kfree(file->private_data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct file_operations mmc_dbg_ext_csd_fops = { | 
|  | .open		= mmc_ext_csd_open, | 
|  | .read		= mmc_ext_csd_read, | 
|  | .release	= mmc_ext_csd_release, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  | static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md) | 
|  | { | 
|  | struct dentry *root; | 
|  |  | 
|  | if (!card->debugfs_root) | 
|  | return 0; | 
|  |  | 
|  | root = card->debugfs_root; | 
|  |  | 
|  | if (mmc_card_mmc(card) || mmc_card_sd(card)) { | 
|  | md->status_dentry = | 
|  | debugfs_create_file_unsafe("status", 0400, root, | 
|  | card, | 
|  | &mmc_dbg_card_status_fops); | 
|  | if (!md->status_dentry) | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (mmc_card_mmc(card)) { | 
|  | md->ext_csd_dentry = | 
|  | debugfs_create_file("ext_csd", S_IRUSR, root, card, | 
|  | &mmc_dbg_ext_csd_fops); | 
|  | if (!md->ext_csd_dentry) | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove_debugfs(struct mmc_card *card, | 
|  | struct mmc_blk_data *md) | 
|  | { | 
|  | if (!card->debugfs_root) | 
|  | return; | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(md->status_dentry)) { | 
|  | debugfs_remove(md->status_dentry); | 
|  | md->status_dentry = NULL; | 
|  | } | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(md->ext_csd_dentry)) { | 
|  | debugfs_remove(md->ext_csd_dentry); | 
|  | md->ext_csd_dentry = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove_debugfs(struct mmc_card *card, | 
|  | struct mmc_blk_data *md) | 
|  | { | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_DEBUG_FS */ | 
|  |  | 
|  | static int mmc_blk_probe(struct mmc_card *card) | 
|  | { | 
|  | struct mmc_blk_data *md, *part_md; | 
|  | char cap_str[10]; | 
|  |  | 
|  | /* | 
|  | * Check that the card supports the command class(es) we need. | 
|  | */ | 
|  | if (!(card->csd.cmdclass & CCC_BLOCK_READ)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mmc_fixup_device(card, mmc_blk_fixups); | 
|  |  | 
|  | card->complete_wq = alloc_workqueue("mmc_complete", | 
|  | WQ_MEM_RECLAIM | WQ_HIGHPRI, 0); | 
|  | if (unlikely(!card->complete_wq)) { | 
|  | pr_err("Failed to create mmc completion workqueue"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | md = mmc_blk_alloc(card); | 
|  | if (IS_ERR(md)) | 
|  | return PTR_ERR(md); | 
|  |  | 
|  | string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, | 
|  | cap_str, sizeof(cap_str)); | 
|  | pr_info("%s: %s %s %s %s\n", | 
|  | md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), | 
|  | cap_str, md->read_only ? "(ro)" : ""); | 
|  |  | 
|  | if (mmc_blk_alloc_parts(card, md)) | 
|  | goto out; | 
|  |  | 
|  | dev_set_drvdata(&card->dev, md); | 
|  |  | 
|  | if (mmc_add_disk(md)) | 
|  | goto out; | 
|  |  | 
|  | list_for_each_entry(part_md, &md->part, part) { | 
|  | if (mmc_add_disk(part_md)) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Add two debugfs entries */ | 
|  | mmc_blk_add_debugfs(card, md); | 
|  |  | 
|  | pm_runtime_set_autosuspend_delay(&card->dev, 3000); | 
|  | pm_runtime_use_autosuspend(&card->dev); | 
|  |  | 
|  | /* | 
|  | * Don't enable runtime PM for SD-combo cards here. Leave that | 
|  | * decision to be taken during the SDIO init sequence instead. | 
|  | */ | 
|  | if (card->type != MMC_TYPE_SD_COMBO) { | 
|  | pm_runtime_set_active(&card->dev); | 
|  | pm_runtime_enable(&card->dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | mmc_blk_remove_parts(card, md); | 
|  | mmc_blk_remove_req(md); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_remove(struct mmc_card *card) | 
|  | { | 
|  | struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
|  |  | 
|  | mmc_blk_remove_debugfs(card, md); | 
|  | mmc_blk_remove_parts(card, md); | 
|  | pm_runtime_get_sync(&card->dev); | 
|  | if (md->part_curr != md->part_type) { | 
|  | mmc_claim_host(card->host); | 
|  | mmc_blk_part_switch(card, md->part_type); | 
|  | mmc_release_host(card->host); | 
|  | } | 
|  | if (card->type != MMC_TYPE_SD_COMBO) | 
|  | pm_runtime_disable(&card->dev); | 
|  | pm_runtime_put_noidle(&card->dev); | 
|  | mmc_blk_remove_req(md); | 
|  | dev_set_drvdata(&card->dev, NULL); | 
|  | destroy_workqueue(card->complete_wq); | 
|  | } | 
|  |  | 
|  | static int _mmc_blk_suspend(struct mmc_card *card) | 
|  | { | 
|  | struct mmc_blk_data *part_md; | 
|  | struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
|  |  | 
|  | if (md) { | 
|  | mmc_queue_suspend(&md->queue); | 
|  | list_for_each_entry(part_md, &md->part, part) { | 
|  | mmc_queue_suspend(&part_md->queue); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_blk_shutdown(struct mmc_card *card) | 
|  | { | 
|  | _mmc_blk_suspend(card); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int mmc_blk_suspend(struct device *dev) | 
|  | { | 
|  | struct mmc_card *card = mmc_dev_to_card(dev); | 
|  |  | 
|  | return _mmc_blk_suspend(card); | 
|  | } | 
|  |  | 
|  | static int mmc_blk_resume(struct device *dev) | 
|  | { | 
|  | struct mmc_blk_data *part_md; | 
|  | struct mmc_blk_data *md = dev_get_drvdata(dev); | 
|  |  | 
|  | if (md) { | 
|  | /* | 
|  | * Resume involves the card going into idle state, | 
|  | * so current partition is always the main one. | 
|  | */ | 
|  | md->part_curr = md->part_type; | 
|  | mmc_queue_resume(&md->queue); | 
|  | list_for_each_entry(part_md, &md->part, part) { | 
|  | mmc_queue_resume(&part_md->queue); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume); | 
|  |  | 
|  | static struct mmc_driver mmc_driver = { | 
|  | .drv		= { | 
|  | .name	= "mmcblk", | 
|  | .pm	= &mmc_blk_pm_ops, | 
|  | }, | 
|  | .probe		= mmc_blk_probe, | 
|  | .remove		= mmc_blk_remove, | 
|  | .shutdown	= mmc_blk_shutdown, | 
|  | }; | 
|  |  | 
|  | static int __init mmc_blk_init(void) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | res  = bus_register(&mmc_rpmb_bus_type); | 
|  | if (res < 0) { | 
|  | pr_err("mmcblk: could not register RPMB bus type\n"); | 
|  | return res; | 
|  | } | 
|  | res = alloc_chrdev_region(&mmc_rpmb_devt, 0, MAX_DEVICES, "rpmb"); | 
|  | if (res < 0) { | 
|  | pr_err("mmcblk: failed to allocate rpmb chrdev region\n"); | 
|  | goto out_bus_unreg; | 
|  | } | 
|  |  | 
|  | if (perdev_minors != CONFIG_MMC_BLOCK_MINORS) | 
|  | pr_info("mmcblk: using %d minors per device\n", perdev_minors); | 
|  |  | 
|  | max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors); | 
|  |  | 
|  | res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
|  | if (res) | 
|  | goto out_chrdev_unreg; | 
|  |  | 
|  | res = mmc_register_driver(&mmc_driver); | 
|  | if (res) | 
|  | goto out_blkdev_unreg; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_blkdev_unreg: | 
|  | unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
|  | out_chrdev_unreg: | 
|  | unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES); | 
|  | out_bus_unreg: | 
|  | bus_unregister(&mmc_rpmb_bus_type); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void __exit mmc_blk_exit(void) | 
|  | { | 
|  | mmc_unregister_driver(&mmc_driver); | 
|  | unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
|  | unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES); | 
|  | bus_unregister(&mmc_rpmb_bus_type); | 
|  | } | 
|  |  | 
|  | module_init(mmc_blk_init); | 
|  | module_exit(mmc_blk_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); | 
|  |  |