|  | #include <net/tcp.h> | 
|  |  | 
|  | /* The bandwidth estimator estimates the rate at which the network | 
|  | * can currently deliver outbound data packets for this flow. At a high | 
|  | * level, it operates by taking a delivery rate sample for each ACK. | 
|  | * | 
|  | * A rate sample records the rate at which the network delivered packets | 
|  | * for this flow, calculated over the time interval between the transmission | 
|  | * of a data packet and the acknowledgment of that packet. | 
|  | * | 
|  | * Specifically, over the interval between each transmit and corresponding ACK, | 
|  | * the estimator generates a delivery rate sample. Typically it uses the rate | 
|  | * at which packets were acknowledged. However, the approach of using only the | 
|  | * acknowledgment rate faces a challenge under the prevalent ACK decimation or | 
|  | * compression: packets can temporarily appear to be delivered much quicker | 
|  | * than the bottleneck rate. Since it is physically impossible to do that in a | 
|  | * sustained fashion, when the estimator notices that the ACK rate is faster | 
|  | * than the transmit rate, it uses the latter: | 
|  | * | 
|  | *    send_rate = #pkts_delivered/(last_snd_time - first_snd_time) | 
|  | *    ack_rate  = #pkts_delivered/(last_ack_time - first_ack_time) | 
|  | *    bw = min(send_rate, ack_rate) | 
|  | * | 
|  | * Notice the estimator essentially estimates the goodput, not always the | 
|  | * network bottleneck link rate when the sending or receiving is limited by | 
|  | * other factors like applications or receiver window limits.  The estimator | 
|  | * deliberately avoids using the inter-packet spacing approach because that | 
|  | * approach requires a large number of samples and sophisticated filtering. | 
|  | * | 
|  | * TCP flows can often be application-limited in request/response workloads. | 
|  | * The estimator marks a bandwidth sample as application-limited if there | 
|  | * was some moment during the sampled window of packets when there was no data | 
|  | * ready to send in the write queue. | 
|  | */ | 
|  |  | 
|  | /* Snapshot the current delivery information in the skb, to generate | 
|  | * a rate sample later when the skb is (s)acked in tcp_rate_skb_delivered(). | 
|  | */ | 
|  | void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb) | 
|  | { | 
|  | struct tcp_sock *tp = tcp_sk(sk); | 
|  |  | 
|  | /* In general we need to start delivery rate samples from the | 
|  | * time we received the most recent ACK, to ensure we include | 
|  | * the full time the network needs to deliver all in-flight | 
|  | * packets. If there are no packets in flight yet, then we | 
|  | * know that any ACKs after now indicate that the network was | 
|  | * able to deliver those packets completely in the sampling | 
|  | * interval between now and the next ACK. | 
|  | * | 
|  | * Note that we use packets_out instead of tcp_packets_in_flight(tp) | 
|  | * because the latter is a guess based on RTO and loss-marking | 
|  | * heuristics. We don't want spurious RTOs or loss markings to cause | 
|  | * a spuriously small time interval, causing a spuriously high | 
|  | * bandwidth estimate. | 
|  | */ | 
|  | if (!tp->packets_out) { | 
|  | tp->first_tx_mstamp  = skb->skb_mstamp; | 
|  | tp->delivered_mstamp = skb->skb_mstamp; | 
|  | } | 
|  |  | 
|  | TCP_SKB_CB(skb)->tx.first_tx_mstamp	= tp->first_tx_mstamp; | 
|  | TCP_SKB_CB(skb)->tx.delivered_mstamp	= tp->delivered_mstamp; | 
|  | TCP_SKB_CB(skb)->tx.delivered		= tp->delivered; | 
|  | TCP_SKB_CB(skb)->tx.is_app_limited	= tp->app_limited ? 1 : 0; | 
|  | } | 
|  |  | 
|  | /* When an skb is sacked or acked, we fill in the rate sample with the (prior) | 
|  | * delivery information when the skb was last transmitted. | 
|  | * | 
|  | * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is | 
|  | * called multiple times. We favor the information from the most recently | 
|  | * sent skb, i.e., the skb with the highest prior_delivered count. | 
|  | */ | 
|  | void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb, | 
|  | struct rate_sample *rs) | 
|  | { | 
|  | struct tcp_sock *tp = tcp_sk(sk); | 
|  | struct tcp_skb_cb *scb = TCP_SKB_CB(skb); | 
|  |  | 
|  | if (!scb->tx.delivered_mstamp) | 
|  | return; | 
|  |  | 
|  | if (!rs->prior_delivered || | 
|  | after(scb->tx.delivered, rs->prior_delivered)) { | 
|  | rs->prior_delivered  = scb->tx.delivered; | 
|  | rs->prior_mstamp     = scb->tx.delivered_mstamp; | 
|  | rs->is_app_limited   = scb->tx.is_app_limited; | 
|  | rs->is_retrans	     = scb->sacked & TCPCB_RETRANS; | 
|  |  | 
|  | /* Find the duration of the "send phase" of this window: */ | 
|  | rs->interval_us      = tcp_stamp_us_delta( | 
|  | skb->skb_mstamp, | 
|  | scb->tx.first_tx_mstamp); | 
|  |  | 
|  | /* Record send time of most recently ACKed packet: */ | 
|  | tp->first_tx_mstamp  = skb->skb_mstamp; | 
|  | } | 
|  | /* Mark off the skb delivered once it's sacked to avoid being | 
|  | * used again when it's cumulatively acked. For acked packets | 
|  | * we don't need to reset since it'll be freed soon. | 
|  | */ | 
|  | if (scb->sacked & TCPCB_SACKED_ACKED) | 
|  | scb->tx.delivered_mstamp = 0; | 
|  | } | 
|  |  | 
|  | /* Update the connection delivery information and generate a rate sample. */ | 
|  | void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost, | 
|  | bool is_sack_reneg, struct rate_sample *rs) | 
|  | { | 
|  | struct tcp_sock *tp = tcp_sk(sk); | 
|  | u32 snd_us, ack_us; | 
|  |  | 
|  | /* Clear app limited if bubble is acked and gone. */ | 
|  | if (tp->app_limited && after(tp->delivered, tp->app_limited)) | 
|  | tp->app_limited = 0; | 
|  |  | 
|  | /* TODO: there are multiple places throughout tcp_ack() to get | 
|  | * current time. Refactor the code using a new "tcp_acktag_state" | 
|  | * to carry current time, flags, stats like "tcp_sacktag_state". | 
|  | */ | 
|  | if (delivered) | 
|  | tp->delivered_mstamp = tp->tcp_mstamp; | 
|  |  | 
|  | rs->acked_sacked = delivered;	/* freshly ACKed or SACKed */ | 
|  | rs->losses = lost;		/* freshly marked lost */ | 
|  | /* Return an invalid sample if no timing information is available or | 
|  | * in recovery from loss with SACK reneging. Rate samples taken during | 
|  | * a SACK reneging event may overestimate bw by including packets that | 
|  | * were SACKed before the reneg. | 
|  | */ | 
|  | if (!rs->prior_mstamp || is_sack_reneg) { | 
|  | rs->delivered = -1; | 
|  | rs->interval_us = -1; | 
|  | return; | 
|  | } | 
|  | rs->delivered   = tp->delivered - rs->prior_delivered; | 
|  |  | 
|  | /* Model sending data and receiving ACKs as separate pipeline phases | 
|  | * for a window. Usually the ACK phase is longer, but with ACK | 
|  | * compression the send phase can be longer. To be safe we use the | 
|  | * longer phase. | 
|  | */ | 
|  | snd_us = rs->interval_us;				/* send phase */ | 
|  | ack_us = tcp_stamp_us_delta(tp->tcp_mstamp, | 
|  | rs->prior_mstamp); /* ack phase */ | 
|  | rs->interval_us = max(snd_us, ack_us); | 
|  |  | 
|  | /* Normally we expect interval_us >= min-rtt. | 
|  | * Note that rate may still be over-estimated when a spuriously | 
|  | * retransmistted skb was first (s)acked because "interval_us" | 
|  | * is under-estimated (up to an RTT). However continuously | 
|  | * measuring the delivery rate during loss recovery is crucial | 
|  | * for connections suffer heavy or prolonged losses. | 
|  | */ | 
|  | if (unlikely(rs->interval_us < tcp_min_rtt(tp))) { | 
|  | if (!rs->is_retrans) | 
|  | pr_debug("tcp rate: %ld %d %u %u %u\n", | 
|  | rs->interval_us, rs->delivered, | 
|  | inet_csk(sk)->icsk_ca_state, | 
|  | tp->rx_opt.sack_ok, tcp_min_rtt(tp)); | 
|  | rs->interval_us = -1; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Record the last non-app-limited or the highest app-limited bw */ | 
|  | if (!rs->is_app_limited || | 
|  | ((u64)rs->delivered * tp->rate_interval_us >= | 
|  | (u64)tp->rate_delivered * rs->interval_us)) { | 
|  | tp->rate_delivered = rs->delivered; | 
|  | tp->rate_interval_us = rs->interval_us; | 
|  | tp->rate_app_limited = rs->is_app_limited; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If a gap is detected between sends, mark the socket application-limited. */ | 
|  | void tcp_rate_check_app_limited(struct sock *sk) | 
|  | { | 
|  | struct tcp_sock *tp = tcp_sk(sk); | 
|  |  | 
|  | if (/* We have less than one packet to send. */ | 
|  | tp->write_seq - tp->snd_nxt < tp->mss_cache && | 
|  | /* Nothing in sending host's qdisc queues or NIC tx queue. */ | 
|  | sk_wmem_alloc_get(sk) < SKB_TRUESIZE(1) && | 
|  | /* We are not limited by CWND. */ | 
|  | tcp_packets_in_flight(tp) < tp->snd_cwnd && | 
|  | /* All lost packets have been retransmitted. */ | 
|  | tp->lost_out <= tp->retrans_out) | 
|  | tp->app_limited = | 
|  | (tp->delivered + tcp_packets_in_flight(tp)) ? : 1; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(tcp_rate_check_app_limited); |