| /* | |
| * Author Andreas Eversberg ([email protected]) | |
| * Based on source code structure by | |
| * Karsten Keil ([email protected]) | |
| * | |
| * This file is (c) under GNU PUBLIC LICENSE | |
| * For changes and modifications please read | |
| * ../../../Documentation/isdn/mISDN.cert | |
| * | |
| * Thanks to Karsten Keil (great drivers) | |
| * Cologne Chip (great chips) | |
| * | |
| * This module does: | |
| * Real-time tone generation | |
| * DTMF detection | |
| * Real-time cross-connection and conferrence | |
| * Compensate jitter due to system load and hardware fault. | |
| * All features are done in kernel space and will be realized | |
| * using hardware, if available and supported by chip set. | |
| * Blowfish encryption/decryption | |
| */ | |
| /* STRUCTURE: | |
| * | |
| * The dsp module provides layer 2 for b-channels (64kbit). It provides | |
| * transparent audio forwarding with special digital signal processing: | |
| * | |
| * - (1) generation of tones | |
| * - (2) detection of dtmf tones | |
| * - (3) crossconnecting and conferences (clocking) | |
| * - (4) echo generation for delay test | |
| * - (5) volume control | |
| * - (6) disable receive data | |
| * - (7) pipeline | |
| * - (8) encryption/decryption | |
| * | |
| * Look: | |
| * TX RX | |
| * ------upper layer------ | |
| * | ^ | |
| * | |(6) | |
| * v | | |
| * +-----+-------------+-----+ | |
| * |(3)(4) | | |
| * | CMX | | |
| * | | | |
| * | +-------------+ | |
| * | | ^ | |
| * | | | | |
| * |+---------+| +----+----+ | |
| * ||(1) || |(2) | | |
| * || || | | | |
| * || Tones || | DTMF | | |
| * || || | | | |
| * || || | | | |
| * |+----+----+| +----+----+ | |
| * +-----+-----+ ^ | |
| * | | | |
| * v | | |
| * +----+----+ +----+----+ | |
| * |(5) | |(5) | | |
| * | | | | | |
| * |TX Volume| |RX Volume| | |
| * | | | | | |
| * | | | | | |
| * +----+----+ +----+----+ | |
| * | ^ | |
| * | | | |
| * v | | |
| * +----+-------------+----+ | |
| * |(7) | | |
| * | | | |
| * | Pipeline Processing | | |
| * | | | |
| * | | | |
| * +----+-------------+----+ | |
| * | ^ | |
| * | | | |
| * v | | |
| * +----+----+ +----+----+ | |
| * |(8) | |(8) | | |
| * | | | | | |
| * | Encrypt | | Decrypt | | |
| * | | | | | |
| * | | | | | |
| * +----+----+ +----+----+ | |
| * | ^ | |
| * | | | |
| * v | | |
| * ------card layer------ | |
| * TX RX | |
| * | |
| * Above you can see the logical data flow. If software is used to do the | |
| * process, it is actually the real data flow. If hardware is used, data | |
| * may not flow, but hardware commands to the card, to provide the data flow | |
| * as shown. | |
| * | |
| * NOTE: The channel must be activated in order to make dsp work, even if | |
| * no data flow to the upper layer is intended. Activation can be done | |
| * after and before controlling the setting using PH_CONTROL requests. | |
| * | |
| * DTMF: Will be detected by hardware if possible. It is done before CMX | |
| * processing. | |
| * | |
| * Tones: Will be generated via software if endless looped audio fifos are | |
| * not supported by hardware. Tones will override all data from CMX. | |
| * It is not required to join a conference to use tones at any time. | |
| * | |
| * CMX: Is transparent when not used. When it is used, it will do | |
| * crossconnections and conferences via software if not possible through | |
| * hardware. If hardware capability is available, hardware is used. | |
| * | |
| * Echo: Is generated by CMX and is used to check performance of hard and | |
| * software CMX. | |
| * | |
| * The CMX has special functions for conferences with one, two and more | |
| * members. It will allow different types of data flow. Receive and transmit | |
| * data to/form upper layer may be swithed on/off individually without losing | |
| * features of CMX, Tones and DTMF. | |
| * | |
| * Echo Cancellation: Sometimes we like to cancel echo from the interface. | |
| * Note that a VoIP call may not have echo caused by the IP phone. The echo | |
| * is generated by the telephone line connected to it. Because the delay | |
| * is high, it becomes an echo. RESULT: Echo Cachelation is required if | |
| * both echo AND delay is applied to an interface. | |
| * Remember that software CMX always generates a more or less delay. | |
| * | |
| * If all used features can be realized in hardware, and if transmit and/or | |
| * receive data ist disabled, the card may not send/receive any data at all. | |
| * Not receiving is useful if only announcements are played. Not sending is | |
| * useful if an answering machine records audio. Not sending and receiving is | |
| * useful during most states of the call. If supported by hardware, tones | |
| * will be played without cpu load. Small PBXs and NT-Mode applications will | |
| * not need expensive hardware when processing calls. | |
| * | |
| * | |
| * LOCKING: | |
| * | |
| * When data is received from upper or lower layer (card), the complete dsp | |
| * module is locked by a global lock. This lock MUST lock irq, because it | |
| * must lock timer events by DSP poll timer. | |
| * When data is ready to be transmitted down, the data is queued and sent | |
| * outside lock and timer event. | |
| * PH_CONTROL must not change any settings, join or split conference members | |
| * during process of data. | |
| * | |
| * HDLC: | |
| * | |
| * It works quite the same as transparent, except that HDLC data is forwarded | |
| * to all other conference members if no hardware bridging is possible. | |
| * Send data will be writte to sendq. Sendq will be sent if confirm is received. | |
| * Conference cannot join, if one member is not hdlc. | |
| * | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gfp.h> | |
| #include <linux/mISDNif.h> | |
| #include <linux/mISDNdsp.h> | |
| #include <linux/module.h> | |
| #include <linux/vmalloc.h> | |
| #include "core.h" | |
| #include "dsp.h" | |
| static const char *mISDN_dsp_revision = "2.0"; | |
| static int debug; | |
| static int options; | |
| static int poll; | |
| static int dtmfthreshold = 100; | |
| MODULE_AUTHOR("Andreas Eversberg"); | |
| module_param(debug, uint, S_IRUGO | S_IWUSR); | |
| module_param(options, uint, S_IRUGO | S_IWUSR); | |
| module_param(poll, uint, S_IRUGO | S_IWUSR); | |
| module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR); | |
| MODULE_LICENSE("GPL"); | |
| /*int spinnest = 0;*/ | |
| spinlock_t dsp_lock; /* global dsp lock */ | |
| struct list_head dsp_ilist; | |
| struct list_head conf_ilist; | |
| int dsp_debug; | |
| int dsp_options; | |
| int dsp_poll, dsp_tics; | |
| /* check if rx may be turned off or must be turned on */ | |
| static void | |
| dsp_rx_off_member(struct dsp *dsp) | |
| { | |
| struct mISDN_ctrl_req cq; | |
| int rx_off = 1; | |
| memset(&cq, 0, sizeof(cq)); | |
| if (!dsp->features_rx_off) | |
| return; | |
| /* not disabled */ | |
| if (!dsp->rx_disabled) | |
| rx_off = 0; | |
| /* software dtmf */ | |
| else if (dsp->dtmf.software) | |
| rx_off = 0; | |
| /* echo in software */ | |
| else if (dsp->echo.software) | |
| rx_off = 0; | |
| /* bridge in software */ | |
| else if (dsp->conf && dsp->conf->software) | |
| rx_off = 0; | |
| /* data is not required by user space and not required | |
| * for echo dtmf detection, soft-echo, soft-bridging */ | |
| if (rx_off == dsp->rx_is_off) | |
| return; | |
| if (!dsp->ch.peer) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: no peer, no rx_off\n", | |
| __func__); | |
| return; | |
| } | |
| cq.op = MISDN_CTRL_RX_OFF; | |
| cq.p1 = rx_off; | |
| if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { | |
| printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", | |
| __func__); | |
| return; | |
| } | |
| dsp->rx_is_off = rx_off; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: %s set rx_off = %d\n", | |
| __func__, dsp->name, rx_off); | |
| } | |
| static void | |
| dsp_rx_off(struct dsp *dsp) | |
| { | |
| struct dsp_conf_member *member; | |
| if (dsp_options & DSP_OPT_NOHARDWARE) | |
| return; | |
| /* no conf */ | |
| if (!dsp->conf) { | |
| dsp_rx_off_member(dsp); | |
| return; | |
| } | |
| /* check all members in conf */ | |
| list_for_each_entry(member, &dsp->conf->mlist, list) { | |
| dsp_rx_off_member(member->dsp); | |
| } | |
| } | |
| /* enable "fill empty" feature */ | |
| static void | |
| dsp_fill_empty(struct dsp *dsp) | |
| { | |
| struct mISDN_ctrl_req cq; | |
| memset(&cq, 0, sizeof(cq)); | |
| if (!dsp->ch.peer) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: no peer, no fill_empty\n", | |
| __func__); | |
| return; | |
| } | |
| cq.op = MISDN_CTRL_FILL_EMPTY; | |
| cq.p1 = 1; | |
| cq.p2 = dsp_silence; | |
| if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { | |
| printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", | |
| __func__); | |
| return; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: %s set fill_empty = 1\n", | |
| __func__, dsp->name); | |
| } | |
| static int | |
| dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb) | |
| { | |
| struct sk_buff *nskb; | |
| int ret = 0; | |
| int cont; | |
| u8 *data; | |
| int len; | |
| if (skb->len < sizeof(int)) { | |
| printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__); | |
| return -EINVAL; | |
| } | |
| cont = *((int *)skb->data); | |
| len = skb->len - sizeof(int); | |
| data = skb->data + sizeof(int); | |
| switch (cont) { | |
| case DTMF_TONE_START: /* turn on DTMF */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: start dtmf\n", __func__); | |
| if (len == sizeof(int)) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_NOTICE "changing DTMF Threshold " | |
| "to %d\n", *((int *)data)); | |
| dsp->dtmf.treshold = (*(int *)data) * 10000; | |
| } | |
| dsp->dtmf.enable = 1; | |
| /* init goertzel */ | |
| dsp_dtmf_goertzel_init(dsp); | |
| /* check dtmf hardware */ | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| break; | |
| case DTMF_TONE_STOP: /* turn off DTMF */ | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: stop dtmf\n", __func__); | |
| dsp->dtmf.enable = 0; | |
| dsp->dtmf.hardware = 0; | |
| dsp->dtmf.software = 0; | |
| break; | |
| case DSP_CONF_JOIN: /* join / update conference */ | |
| if (len < sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (*((u32 *)data) == 0) | |
| goto conf_split; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: join conference %d\n", | |
| __func__, *((u32 *)data)); | |
| ret = dsp_cmx_conf(dsp, *((u32 *)data)); | |
| /* dsp_cmx_hardware will also be called here */ | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_CONF_SPLIT: /* remove from conference */ | |
| conf_split: | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: release conference\n", __func__); | |
| ret = dsp_cmx_conf(dsp, 0); | |
| /* dsp_cmx_hardware will also be called here */ | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| dsp_rx_off(dsp); | |
| break; | |
| case DSP_TONE_PATT_ON: /* play tone */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len < sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: turn tone 0x%x on\n", | |
| __func__, *((int *)skb->data)); | |
| ret = dsp_tone(dsp, *((int *)data)); | |
| if (!ret) { | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| } | |
| if (!dsp->tone.tone) | |
| goto tone_off; | |
| break; | |
| case DSP_TONE_PATT_OFF: /* stop tone */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: turn tone off\n", __func__); | |
| dsp_tone(dsp, 0); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| /* reset tx buffers (user space data) */ | |
| tone_off: | |
| dsp->rx_W = 0; | |
| dsp->rx_R = 0; | |
| break; | |
| case DSP_VOL_CHANGE_TX: /* change volume */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len < sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->tx_volume = *((int *)data); | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: change tx vol to %d\n", | |
| __func__, dsp->tx_volume); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| break; | |
| case DSP_VOL_CHANGE_RX: /* change volume */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len < sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->rx_volume = *((int *)data); | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: change rx vol to %d\n", | |
| __func__, dsp->tx_volume); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| break; | |
| case DSP_ECHO_ON: /* enable echo */ | |
| dsp->echo.software = 1; /* soft echo */ | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_ECHO_OFF: /* disable echo */ | |
| dsp->echo.software = 0; | |
| dsp->echo.hardware = 0; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_RECEIVE_ON: /* enable receive to user space */ | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: enable receive to user " | |
| "space\n", __func__); | |
| dsp->rx_disabled = 0; | |
| dsp_rx_off(dsp); | |
| break; | |
| case DSP_RECEIVE_OFF: /* disable receive to user space */ | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: disable receive to " | |
| "user space\n", __func__); | |
| dsp->rx_disabled = 1; | |
| dsp_rx_off(dsp); | |
| break; | |
| case DSP_MIX_ON: /* enable mixing of tx data */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: enable mixing of " | |
| "tx-data with conf members\n", __func__); | |
| dsp->tx_mix = 1; | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_MIX_OFF: /* disable mixing of tx data */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: disable mixing of " | |
| "tx-data with conf members\n", __func__); | |
| dsp->tx_mix = 0; | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_TXDATA_ON: /* enable txdata */ | |
| dsp->tx_data = 1; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: enable tx-data\n", __func__); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_TXDATA_OFF: /* disable txdata */ | |
| dsp->tx_data = 0; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: disable tx-data\n", __func__); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| if (dsp_debug & DEBUG_DSP_CMX) | |
| dsp_cmx_debug(dsp); | |
| break; | |
| case DSP_DELAY: /* use delay algorithm instead of dynamic | |
| jitter algorithm */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len < sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->cmx_delay = (*((int *)data)) << 3; | |
| /* milliseconds to samples */ | |
| if (dsp->cmx_delay >= (CMX_BUFF_HALF >> 1)) | |
| /* clip to half of maximum usable buffer | |
| (half of half buffer) */ | |
| dsp->cmx_delay = (CMX_BUFF_HALF >> 1) - 1; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: use delay algorithm to " | |
| "compensate jitter (%d samples)\n", | |
| __func__, dsp->cmx_delay); | |
| break; | |
| case DSP_JITTER: /* use dynamic jitter algorithm instead of | |
| delay algorithm */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->cmx_delay = 0; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: use jitter algorithm to " | |
| "compensate jitter\n", __func__); | |
| break; | |
| case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->tx_dejitter = 1; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: use dejitter on TX " | |
| "buffer\n", __func__); | |
| break; | |
| case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| dsp->tx_dejitter = 0; | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: use TX buffer without " | |
| "dejittering\n", __func__); | |
| break; | |
| case DSP_PIPELINE_CFG: | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len > 0 && ((char *)data)[len - 1]) { | |
| printk(KERN_DEBUG "%s: pipeline config string " | |
| "is not NULL terminated!\n", __func__); | |
| ret = -EINVAL; | |
| } else { | |
| dsp->pipeline.inuse = 1; | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| ret = dsp_pipeline_build(&dsp->pipeline, | |
| len > 0 ? data : NULL); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| } | |
| break; | |
| case DSP_BF_ENABLE_KEY: /* turn blowfish on */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (len < 4 || len > 56) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: turn blowfish on (key " | |
| "not shown)\n", __func__); | |
| ret = dsp_bf_init(dsp, (u8 *)data, len); | |
| /* set new cont */ | |
| if (!ret) | |
| cont = DSP_BF_ACCEPT; | |
| else | |
| cont = DSP_BF_REJECT; | |
| /* send indication if it worked to set it */ | |
| nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY, | |
| sizeof(int), &cont, GFP_ATOMIC); | |
| if (nskb) { | |
| if (dsp->up) { | |
| if (dsp->up->send(dsp->up, nskb)) | |
| dev_kfree_skb(nskb); | |
| } else | |
| dev_kfree_skb(nskb); | |
| } | |
| if (!ret) { | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| } | |
| break; | |
| case DSP_BF_DISABLE: /* turn blowfish off */ | |
| if (dsp->hdlc) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: turn blowfish off\n", __func__); | |
| dsp_bf_cleanup(dsp); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| break; | |
| default: | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: ctrl req %x unhandled\n", | |
| __func__, cont); | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static void | |
| get_features(struct mISDNchannel *ch) | |
| { | |
| struct dsp *dsp = container_of(ch, struct dsp, ch); | |
| struct mISDN_ctrl_req cq; | |
| if (!ch->peer) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: no peer, no features\n", | |
| __func__); | |
| return; | |
| } | |
| memset(&cq, 0, sizeof(cq)); | |
| cq.op = MISDN_CTRL_GETOP; | |
| if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) { | |
| printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", | |
| __func__); | |
| return; | |
| } | |
| if (cq.op & MISDN_CTRL_RX_OFF) | |
| dsp->features_rx_off = 1; | |
| if (cq.op & MISDN_CTRL_FILL_EMPTY) | |
| dsp->features_fill_empty = 1; | |
| if (dsp_options & DSP_OPT_NOHARDWARE) | |
| return; | |
| if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) { | |
| cq.op = MISDN_CTRL_HW_FEATURES; | |
| *((u_long *)&cq.p1) = (u_long)&dsp->features; | |
| if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) { | |
| printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", | |
| __func__); | |
| } | |
| } else | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: features not supported for %s\n", | |
| __func__, dsp->name); | |
| } | |
| static int | |
| dsp_function(struct mISDNchannel *ch, struct sk_buff *skb) | |
| { | |
| struct dsp *dsp = container_of(ch, struct dsp, ch); | |
| struct mISDNhead *hh; | |
| int ret = 0; | |
| u8 *digits = NULL; | |
| u_long flags; | |
| hh = mISDN_HEAD_P(skb); | |
| switch (hh->prim) { | |
| /* FROM DOWN */ | |
| case (PH_DATA_CNF): | |
| dsp->data_pending = 0; | |
| /* trigger next hdlc frame, if any */ | |
| if (dsp->hdlc) { | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| if (dsp->b_active) | |
| schedule_work(&dsp->workq); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| } | |
| break; | |
| case (PH_DATA_IND): | |
| case (DL_DATA_IND): | |
| if (skb->len < 1) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp->rx_is_off) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: rx-data during rx_off" | |
| " for %s\n", | |
| __func__, dsp->name); | |
| } | |
| if (dsp->hdlc) { | |
| /* hdlc */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp_cmx_hdlc(dsp, skb); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if (dsp->rx_disabled) { | |
| /* if receive is not allowed */ | |
| break; | |
| } | |
| hh->prim = DL_DATA_IND; | |
| if (dsp->up) | |
| return dsp->up->send(dsp->up, skb); | |
| break; | |
| } | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| /* decrypt if enabled */ | |
| if (dsp->bf_enable) | |
| dsp_bf_decrypt(dsp, skb->data, skb->len); | |
| /* pipeline */ | |
| if (dsp->pipeline.inuse) | |
| dsp_pipeline_process_rx(&dsp->pipeline, skb->data, | |
| skb->len, hh->id); | |
| /* change volume if requested */ | |
| if (dsp->rx_volume) | |
| dsp_change_volume(skb, dsp->rx_volume); | |
| /* check if dtmf soft decoding is turned on */ | |
| if (dsp->dtmf.software) { | |
| digits = dsp_dtmf_goertzel_decode(dsp, skb->data, | |
| skb->len, (dsp_options & DSP_OPT_ULAW) ? 1 : 0); | |
| } | |
| /* we need to process receive data if software */ | |
| if (dsp->conf && dsp->conf->software) { | |
| /* process data from card at cmx */ | |
| dsp_cmx_receive(dsp, skb); | |
| } | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* send dtmf result, if any */ | |
| if (digits) { | |
| while (*digits) { | |
| int k; | |
| struct sk_buff *nskb; | |
| if (dsp_debug & DEBUG_DSP_DTMF) | |
| printk(KERN_DEBUG "%s: digit" | |
| "(%c) to layer %s\n", | |
| __func__, *digits, dsp->name); | |
| k = *digits | DTMF_TONE_VAL; | |
| nskb = _alloc_mISDN_skb(PH_CONTROL_IND, | |
| MISDN_ID_ANY, sizeof(int), &k, | |
| GFP_ATOMIC); | |
| if (nskb) { | |
| if (dsp->up) { | |
| if (dsp->up->send( | |
| dsp->up, nskb)) | |
| dev_kfree_skb(nskb); | |
| } else | |
| dev_kfree_skb(nskb); | |
| } | |
| digits++; | |
| } | |
| } | |
| if (dsp->rx_disabled) { | |
| /* if receive is not allowed */ | |
| break; | |
| } | |
| hh->prim = DL_DATA_IND; | |
| if (dsp->up) | |
| return dsp->up->send(dsp->up, skb); | |
| break; | |
| case (PH_CONTROL_IND): | |
| if (dsp_debug & DEBUG_DSP_DTMFCOEFF) | |
| printk(KERN_DEBUG "%s: PH_CONTROL INDICATION " | |
| "received: %x (len %d) %s\n", __func__, | |
| hh->id, skb->len, dsp->name); | |
| switch (hh->id) { | |
| case (DTMF_HFC_COEF): /* getting coefficients */ | |
| if (!dsp->dtmf.hardware) { | |
| if (dsp_debug & DEBUG_DSP_DTMFCOEFF) | |
| printk(KERN_DEBUG "%s: ignoring DTMF " | |
| "coefficients from HFC\n", | |
| __func__); | |
| break; | |
| } | |
| digits = dsp_dtmf_goertzel_decode(dsp, skb->data, | |
| skb->len, 2); | |
| while (*digits) { | |
| int k; | |
| struct sk_buff *nskb; | |
| if (dsp_debug & DEBUG_DSP_DTMF) | |
| printk(KERN_DEBUG "%s: digit" | |
| "(%c) to layer %s\n", | |
| __func__, *digits, dsp->name); | |
| k = *digits | DTMF_TONE_VAL; | |
| nskb = _alloc_mISDN_skb(PH_CONTROL_IND, | |
| MISDN_ID_ANY, sizeof(int), &k, | |
| GFP_ATOMIC); | |
| if (nskb) { | |
| if (dsp->up) { | |
| if (dsp->up->send( | |
| dsp->up, nskb)) | |
| dev_kfree_skb(nskb); | |
| } else | |
| dev_kfree_skb(nskb); | |
| } | |
| digits++; | |
| } | |
| break; | |
| case (HFC_VOL_CHANGE_TX): /* change volume */ | |
| if (skb->len != sizeof(int)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp->tx_volume = *((int *)skb->data); | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: change tx volume to " | |
| "%d\n", __func__, dsp->tx_volume); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| break; | |
| default: | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: ctrl ind %x unhandled " | |
| "%s\n", __func__, hh->id, dsp->name); | |
| ret = -EINVAL; | |
| } | |
| break; | |
| case (PH_ACTIVATE_IND): | |
| case (PH_ACTIVATE_CNF): | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: b_channel is now active %s\n", | |
| __func__, dsp->name); | |
| /* bchannel now active */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp->b_active = 1; | |
| dsp->data_pending = 0; | |
| dsp->rx_init = 1; | |
| /* rx_W and rx_R will be adjusted on first frame */ | |
| dsp->rx_W = 0; | |
| dsp->rx_R = 0; | |
| memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff)); | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_dtmf_hardware(dsp); | |
| dsp_rx_off(dsp); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: done with activation, sending " | |
| "confirm to user space. %s\n", __func__, | |
| dsp->name); | |
| /* send activation to upper layer */ | |
| hh->prim = DL_ESTABLISH_CNF; | |
| if (dsp->up) | |
| return dsp->up->send(dsp->up, skb); | |
| break; | |
| case (PH_DEACTIVATE_IND): | |
| case (PH_DEACTIVATE_CNF): | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: b_channel is now inactive %s\n", | |
| __func__, dsp->name); | |
| /* bchannel now inactive */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp->b_active = 0; | |
| dsp->data_pending = 0; | |
| dsp_cmx_hardware(dsp->conf, dsp); | |
| dsp_rx_off(dsp); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| hh->prim = DL_RELEASE_CNF; | |
| if (dsp->up) | |
| return dsp->up->send(dsp->up, skb); | |
| break; | |
| /* FROM UP */ | |
| case (DL_DATA_REQ): | |
| case (PH_DATA_REQ): | |
| if (skb->len < 1) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (dsp->hdlc) { | |
| /* hdlc */ | |
| if (!dsp->b_active) { | |
| ret = -EIO; | |
| break; | |
| } | |
| hh->prim = PH_DATA_REQ; | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| skb_queue_tail(&dsp->sendq, skb); | |
| schedule_work(&dsp->workq); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| return 0; | |
| } | |
| /* send data to tx-buffer (if no tone is played) */ | |
| if (!dsp->tone.tone) { | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp_cmx_transmit(dsp, skb); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| } | |
| break; | |
| case (PH_CONTROL_REQ): | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| ret = dsp_control_req(dsp, hh, skb); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| break; | |
| case (DL_ESTABLISH_REQ): | |
| case (PH_ACTIVATE_REQ): | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: activating b_channel %s\n", | |
| __func__, dsp->name); | |
| if (dsp->dtmf.hardware || dsp->dtmf.software) | |
| dsp_dtmf_goertzel_init(dsp); | |
| get_features(ch); | |
| /* enable fill_empty feature */ | |
| if (dsp->features_fill_empty) | |
| dsp_fill_empty(dsp); | |
| /* send ph_activate */ | |
| hh->prim = PH_ACTIVATE_REQ; | |
| if (ch->peer) | |
| return ch->recv(ch->peer, skb); | |
| break; | |
| case (DL_RELEASE_REQ): | |
| case (PH_DEACTIVATE_REQ): | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: releasing b_channel %s\n", | |
| __func__, dsp->name); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp->tone.tone = 0; | |
| dsp->tone.hardware = 0; | |
| dsp->tone.software = 0; | |
| if (timer_pending(&dsp->tone.tl)) | |
| del_timer(&dsp->tone.tl); | |
| if (dsp->conf) | |
| dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be | |
| called here */ | |
| skb_queue_purge(&dsp->sendq); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| hh->prim = PH_DEACTIVATE_REQ; | |
| if (ch->peer) | |
| return ch->recv(ch->peer, skb); | |
| break; | |
| default: | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: msg %x unhandled %s\n", | |
| __func__, hh->prim, dsp->name); | |
| ret = -EINVAL; | |
| } | |
| if (!ret) | |
| dev_kfree_skb(skb); | |
| return ret; | |
| } | |
| static int | |
| dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | |
| { | |
| struct dsp *dsp = container_of(ch, struct dsp, ch); | |
| u_long flags; | |
| int err = 0; | |
| if (debug & DEBUG_DSP_CTRL) | |
| printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd); | |
| switch (cmd) { | |
| case OPEN_CHANNEL: | |
| break; | |
| case CLOSE_CHANNEL: | |
| if (dsp->ch.peer) | |
| dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL); | |
| /* wait until workqueue has finished, | |
| * must lock here, or we may hit send-process currently | |
| * queueing. */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp->b_active = 0; | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* MUST not be locked, because it waits until queue is done. */ | |
| cancel_work_sync(&dsp->workq); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| if (timer_pending(&dsp->tone.tl)) | |
| del_timer(&dsp->tone.tl); | |
| skb_queue_purge(&dsp->sendq); | |
| if (dsp_debug & DEBUG_DSP_CTRL) | |
| printk(KERN_DEBUG "%s: releasing member %s\n", | |
| __func__, dsp->name); | |
| dsp->b_active = 0; | |
| dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called | |
| here */ | |
| dsp_pipeline_destroy(&dsp->pipeline); | |
| if (dsp_debug & DEBUG_DSP_CTRL) | |
| printk(KERN_DEBUG "%s: remove & destroy object %s\n", | |
| __func__, dsp->name); | |
| list_del(&dsp->list); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if (dsp_debug & DEBUG_DSP_CTRL) | |
| printk(KERN_DEBUG "%s: dsp instance released\n", | |
| __func__); | |
| vfree(dsp); | |
| module_put(THIS_MODULE); | |
| break; | |
| } | |
| return err; | |
| } | |
| static void | |
| dsp_send_bh(struct work_struct *work) | |
| { | |
| struct dsp *dsp = container_of(work, struct dsp, workq); | |
| struct sk_buff *skb; | |
| struct mISDNhead *hh; | |
| if (dsp->hdlc && dsp->data_pending) | |
| return; /* wait until data has been acknowledged */ | |
| /* send queued data */ | |
| while ((skb = skb_dequeue(&dsp->sendq))) { | |
| /* in locked date, we must have still data in queue */ | |
| if (dsp->data_pending) { | |
| if (dsp_debug & DEBUG_DSP_CORE) | |
| printk(KERN_DEBUG "%s: fifo full %s, this is " | |
| "no bug!\n", __func__, dsp->name); | |
| /* flush transparent data, if not acked */ | |
| dev_kfree_skb(skb); | |
| continue; | |
| } | |
| hh = mISDN_HEAD_P(skb); | |
| if (hh->prim == DL_DATA_REQ) { | |
| /* send packet up */ | |
| if (dsp->up) { | |
| if (dsp->up->send(dsp->up, skb)) | |
| dev_kfree_skb(skb); | |
| } else | |
| dev_kfree_skb(skb); | |
| } else { | |
| /* send packet down */ | |
| if (dsp->ch.peer) { | |
| dsp->data_pending = 1; | |
| if (dsp->ch.recv(dsp->ch.peer, skb)) { | |
| dev_kfree_skb(skb); | |
| dsp->data_pending = 0; | |
| } | |
| } else | |
| dev_kfree_skb(skb); | |
| } | |
| } | |
| } | |
| static int | |
| dspcreate(struct channel_req *crq) | |
| { | |
| struct dsp *ndsp; | |
| u_long flags; | |
| if (crq->protocol != ISDN_P_B_L2DSP | |
| && crq->protocol != ISDN_P_B_L2DSPHDLC) | |
| return -EPROTONOSUPPORT; | |
| ndsp = vzalloc(sizeof(struct dsp)); | |
| if (!ndsp) { | |
| printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__); | |
| return -ENOMEM; | |
| } | |
| if (dsp_debug & DEBUG_DSP_CTRL) | |
| printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__); | |
| /* default enabled */ | |
| INIT_WORK(&ndsp->workq, (void *)dsp_send_bh); | |
| skb_queue_head_init(&ndsp->sendq); | |
| ndsp->ch.send = dsp_function; | |
| ndsp->ch.ctrl = dsp_ctrl; | |
| ndsp->up = crq->ch; | |
| crq->ch = &ndsp->ch; | |
| if (crq->protocol == ISDN_P_B_L2DSP) { | |
| crq->protocol = ISDN_P_B_RAW; | |
| ndsp->hdlc = 0; | |
| } else { | |
| crq->protocol = ISDN_P_B_HDLC; | |
| ndsp->hdlc = 1; | |
| } | |
| if (!try_module_get(THIS_MODULE)) | |
| printk(KERN_WARNING "%s:cannot get module\n", | |
| __func__); | |
| sprintf(ndsp->name, "DSP_C%x(0x%p)", | |
| ndsp->up->st->dev->id + 1, ndsp); | |
| /* set frame size to start */ | |
| ndsp->features.hfc_id = -1; /* current PCM id */ | |
| ndsp->features.pcm_id = -1; /* current PCM id */ | |
| ndsp->pcm_slot_rx = -1; /* current CPM slot */ | |
| ndsp->pcm_slot_tx = -1; | |
| ndsp->pcm_bank_rx = -1; | |
| ndsp->pcm_bank_tx = -1; | |
| ndsp->hfc_conf = -1; /* current conference number */ | |
| /* set tone timer */ | |
| ndsp->tone.tl.function = (void *)dsp_tone_timeout; | |
| ndsp->tone.tl.data = (long) ndsp; | |
| init_timer(&ndsp->tone.tl); | |
| if (dtmfthreshold < 20 || dtmfthreshold > 500) | |
| dtmfthreshold = 200; | |
| ndsp->dtmf.treshold = dtmfthreshold * 10000; | |
| /* init pipeline append to list */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| dsp_pipeline_init(&ndsp->pipeline); | |
| list_add_tail(&ndsp->list, &dsp_ilist); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| return 0; | |
| } | |
| static struct Bprotocol DSP = { | |
| .Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK)) | |
| | (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)), | |
| .name = "dsp", | |
| .create = dspcreate | |
| }; | |
| static int __init dsp_init(void) | |
| { | |
| int err; | |
| int tics; | |
| printk(KERN_INFO "DSP module %s\n", mISDN_dsp_revision); | |
| dsp_options = options; | |
| dsp_debug = debug; | |
| /* set packet size */ | |
| dsp_poll = poll; | |
| if (dsp_poll) { | |
| if (dsp_poll > MAX_POLL) { | |
| printk(KERN_ERR "%s: Wrong poll value (%d), use %d " | |
| "maximum.\n", __func__, poll, MAX_POLL); | |
| err = -EINVAL; | |
| return err; | |
| } | |
| if (dsp_poll < 8) { | |
| printk(KERN_ERR "%s: Wrong poll value (%d), use 8 " | |
| "minimum.\n", __func__, dsp_poll); | |
| err = -EINVAL; | |
| return err; | |
| } | |
| dsp_tics = poll * HZ / 8000; | |
| if (dsp_tics * 8000 != poll * HZ) { | |
| printk(KERN_INFO "mISDN_dsp: Cannot clock every %d " | |
| "samples (0,125 ms). It is not a multiple of " | |
| "%d HZ.\n", poll, HZ); | |
| err = -EINVAL; | |
| return err; | |
| } | |
| } else { | |
| poll = 8; | |
| while (poll <= MAX_POLL) { | |
| tics = (poll * HZ) / 8000; | |
| if (tics * 8000 == poll * HZ) { | |
| dsp_tics = tics; | |
| dsp_poll = poll; | |
| if (poll >= 64) | |
| break; | |
| } | |
| poll++; | |
| } | |
| } | |
| if (dsp_poll == 0) { | |
| printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel " | |
| "clock that equals exactly the duration of 8-256 " | |
| "samples. (Choose kernel clock speed like 100, 250, " | |
| "300, 1000)\n"); | |
| err = -EINVAL; | |
| return err; | |
| } | |
| printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals " | |
| "%d jiffies.\n", dsp_poll, dsp_tics); | |
| spin_lock_init(&dsp_lock); | |
| INIT_LIST_HEAD(&dsp_ilist); | |
| INIT_LIST_HEAD(&conf_ilist); | |
| /* init conversion tables */ | |
| dsp_audio_generate_law_tables(); | |
| dsp_silence = (dsp_options & DSP_OPT_ULAW) ? 0xff : 0x2a; | |
| dsp_audio_law_to_s32 = (dsp_options & DSP_OPT_ULAW) ? | |
| dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32; | |
| dsp_audio_generate_s2law_table(); | |
| dsp_audio_generate_seven(); | |
| dsp_audio_generate_mix_table(); | |
| if (dsp_options & DSP_OPT_ULAW) | |
| dsp_audio_generate_ulaw_samples(); | |
| dsp_audio_generate_volume_changes(); | |
| err = dsp_pipeline_module_init(); | |
| if (err) { | |
| printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, " | |
| "error(%d)\n", err); | |
| return err; | |
| } | |
| err = mISDN_register_Bprotocol(&DSP); | |
| if (err) { | |
| printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err); | |
| return err; | |
| } | |
| /* set sample timer */ | |
| dsp_spl_tl.function = (void *)dsp_cmx_send; | |
| dsp_spl_tl.data = 0; | |
| init_timer(&dsp_spl_tl); | |
| dsp_spl_tl.expires = jiffies + dsp_tics; | |
| dsp_spl_jiffies = dsp_spl_tl.expires; | |
| add_timer(&dsp_spl_tl); | |
| return 0; | |
| } | |
| static void __exit dsp_cleanup(void) | |
| { | |
| mISDN_unregister_Bprotocol(&DSP); | |
| del_timer_sync(&dsp_spl_tl); | |
| if (!list_empty(&dsp_ilist)) { | |
| printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not " | |
| "empty.\n"); | |
| } | |
| if (!list_empty(&conf_ilist)) { | |
| printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not " | |
| "all memory freed.\n"); | |
| } | |
| dsp_pipeline_module_exit(); | |
| } | |
| module_init(dsp_init); | |
| module_exit(dsp_cleanup); |