| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _LINUX_HIGHMEM_H |
| #define _LINUX_HIGHMEM_H |
| |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/bug.h> |
| #include <linux/cacheflush.h> |
| #include <linux/kmsan.h> |
| #include <linux/mm.h> |
| #include <linux/uaccess.h> |
| #include <linux/hardirq.h> |
| |
| #include "highmem-internal.h" |
| |
| /** |
| * kmap - Map a page for long term usage |
| * @page: Pointer to the page to be mapped |
| * |
| * Returns: The virtual address of the mapping |
| * |
| * Can only be invoked from preemptible task context because on 32bit |
| * systems with CONFIG_HIGHMEM enabled this function might sleep. |
| * |
| * For systems with CONFIG_HIGHMEM=n and for pages in the low memory area |
| * this returns the virtual address of the direct kernel mapping. |
| * |
| * The returned virtual address is globally visible and valid up to the |
| * point where it is unmapped via kunmap(). The pointer can be handed to |
| * other contexts. |
| * |
| * For highmem pages on 32bit systems this can be slow as the mapping space |
| * is limited and protected by a global lock. In case that there is no |
| * mapping slot available the function blocks until a slot is released via |
| * kunmap(). |
| */ |
| static inline void *kmap(struct page *page); |
| |
| /** |
| * kunmap - Unmap the virtual address mapped by kmap() |
| * @page: Pointer to the page which was mapped by kmap() |
| * |
| * Counterpart to kmap(). A NOOP for CONFIG_HIGHMEM=n and for mappings of |
| * pages in the low memory area. |
| */ |
| static inline void kunmap(struct page *page); |
| |
| /** |
| * kmap_to_page - Get the page for a kmap'ed address |
| * @addr: The address to look up |
| * |
| * Returns: The page which is mapped to @addr. |
| */ |
| static inline struct page *kmap_to_page(void *addr); |
| |
| /** |
| * kmap_flush_unused - Flush all unused kmap mappings in order to |
| * remove stray mappings |
| */ |
| static inline void kmap_flush_unused(void); |
| |
| /** |
| * kmap_local_page - Map a page for temporary usage |
| * @page: Pointer to the page to be mapped |
| * |
| * Returns: The virtual address of the mapping |
| * |
| * Can be invoked from any context, including interrupts. |
| * |
| * Requires careful handling when nesting multiple mappings because the map |
| * management is stack based. The unmap has to be in the reverse order of |
| * the map operation: |
| * |
| * addr1 = kmap_local_page(page1); |
| * addr2 = kmap_local_page(page2); |
| * ... |
| * kunmap_local(addr2); |
| * kunmap_local(addr1); |
| * |
| * Unmapping addr1 before addr2 is invalid and causes malfunction. |
| * |
| * Contrary to kmap() mappings the mapping is only valid in the context of |
| * the caller and cannot be handed to other contexts. |
| * |
| * On CONFIG_HIGHMEM=n kernels and for low memory pages this returns the |
| * virtual address of the direct mapping. Only real highmem pages are |
| * temporarily mapped. |
| * |
| * While kmap_local_page() is significantly faster than kmap() for the highmem |
| * case it comes with restrictions about the pointer validity. |
| * |
| * On HIGHMEM enabled systems mapping a highmem page has the side effect of |
| * disabling migration in order to keep the virtual address stable across |
| * preemption. No caller of kmap_local_page() can rely on this side effect. |
| */ |
| static inline void *kmap_local_page(struct page *page); |
| |
| /** |
| * kmap_local_folio - Map a page in this folio for temporary usage |
| * @folio: The folio containing the page. |
| * @offset: The byte offset within the folio which identifies the page. |
| * |
| * Requires careful handling when nesting multiple mappings because the map |
| * management is stack based. The unmap has to be in the reverse order of |
| * the map operation:: |
| * |
| * addr1 = kmap_local_folio(folio1, offset1); |
| * addr2 = kmap_local_folio(folio2, offset2); |
| * ... |
| * kunmap_local(addr2); |
| * kunmap_local(addr1); |
| * |
| * Unmapping addr1 before addr2 is invalid and causes malfunction. |
| * |
| * Contrary to kmap() mappings the mapping is only valid in the context of |
| * the caller and cannot be handed to other contexts. |
| * |
| * On CONFIG_HIGHMEM=n kernels and for low memory pages this returns the |
| * virtual address of the direct mapping. Only real highmem pages are |
| * temporarily mapped. |
| * |
| * While it is significantly faster than kmap() for the highmem case it |
| * comes with restrictions about the pointer validity. |
| * |
| * On HIGHMEM enabled systems mapping a highmem page has the side effect of |
| * disabling migration in order to keep the virtual address stable across |
| * preemption. No caller of kmap_local_folio() can rely on this side effect. |
| * |
| * Context: Can be invoked from any context. |
| * Return: The virtual address of @offset. |
| */ |
| static inline void *kmap_local_folio(struct folio *folio, size_t offset); |
| |
| /** |
| * kmap_atomic - Atomically map a page for temporary usage - Deprecated! |
| * @page: Pointer to the page to be mapped |
| * |
| * Returns: The virtual address of the mapping |
| * |
| * In fact a wrapper around kmap_local_page() which also disables pagefaults |
| * and, depending on PREEMPT_RT configuration, also CPU migration and |
| * preemption. Therefore users should not count on the latter two side effects. |
| * |
| * Mappings should always be released by kunmap_atomic(). |
| * |
| * Do not use in new code. Use kmap_local_page() instead. |
| * |
| * It is used in atomic context when code wants to access the contents of a |
| * page that might be allocated from high memory (see __GFP_HIGHMEM), for |
| * example a page in the pagecache. The API has two functions, and they |
| * can be used in a manner similar to the following:: |
| * |
| * // Find the page of interest. |
| * struct page *page = find_get_page(mapping, offset); |
| * |
| * // Gain access to the contents of that page. |
| * void *vaddr = kmap_atomic(page); |
| * |
| * // Do something to the contents of that page. |
| * memset(vaddr, 0, PAGE_SIZE); |
| * |
| * // Unmap that page. |
| * kunmap_atomic(vaddr); |
| * |
| * Note that the kunmap_atomic() call takes the result of the kmap_atomic() |
| * call, not the argument. |
| * |
| * If you need to map two pages because you want to copy from one page to |
| * another you need to keep the kmap_atomic calls strictly nested, like: |
| * |
| * vaddr1 = kmap_atomic(page1); |
| * vaddr2 = kmap_atomic(page2); |
| * |
| * memcpy(vaddr1, vaddr2, PAGE_SIZE); |
| * |
| * kunmap_atomic(vaddr2); |
| * kunmap_atomic(vaddr1); |
| */ |
| static inline void *kmap_atomic(struct page *page); |
| |
| /* Highmem related interfaces for management code */ |
| static inline unsigned long nr_free_highpages(void); |
| static inline unsigned long totalhigh_pages(void); |
| |
| #ifndef ARCH_HAS_FLUSH_ANON_PAGE |
| static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) |
| { |
| } |
| #endif |
| |
| #ifndef ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE |
| static inline void flush_kernel_vmap_range(void *vaddr, int size) |
| { |
| } |
| static inline void invalidate_kernel_vmap_range(void *vaddr, int size) |
| { |
| } |
| #endif |
| |
| /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */ |
| #ifndef clear_user_highpage |
| static inline void clear_user_highpage(struct page *page, unsigned long vaddr) |
| { |
| void *addr = kmap_local_page(page); |
| clear_user_page(addr, vaddr, page); |
| kunmap_local(addr); |
| } |
| #endif |
| |
| #ifndef vma_alloc_zeroed_movable_folio |
| /** |
| * vma_alloc_zeroed_movable_folio - Allocate a zeroed page for a VMA. |
| * @vma: The VMA the page is to be allocated for. |
| * @vaddr: The virtual address the page will be inserted into. |
| * |
| * This function will allocate a page suitable for inserting into this |
| * VMA at this virtual address. It may be allocated from highmem or |
| * the movable zone. An architecture may provide its own implementation. |
| * |
| * Return: A folio containing one allocated and zeroed page or NULL if |
| * we are out of memory. |
| */ |
| static inline |
| struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma, |
| unsigned long vaddr) |
| { |
| struct folio *folio; |
| |
| folio = vma_alloc_folio(GFP_HIGHUSER_MOVABLE, 0, vma, vaddr); |
| if (folio && user_alloc_needs_zeroing()) |
| clear_user_highpage(&folio->page, vaddr); |
| |
| return folio; |
| } |
| #endif |
| |
| static inline void clear_highpage(struct page *page) |
| { |
| void *kaddr = kmap_local_page(page); |
| clear_page(kaddr); |
| kunmap_local(kaddr); |
| } |
| |
| static inline void clear_highpage_kasan_tagged(struct page *page) |
| { |
| void *kaddr = kmap_local_page(page); |
| |
| clear_page(kasan_reset_tag(kaddr)); |
| kunmap_local(kaddr); |
| } |
| |
| #ifndef __HAVE_ARCH_TAG_CLEAR_HIGHPAGE |
| |
| static inline void tag_clear_highpage(struct page *page) |
| { |
| } |
| |
| #endif |
| |
| /* |
| * If we pass in a base or tail page, we can zero up to PAGE_SIZE. |
| * If we pass in a head page, we can zero up to the size of the compound page. |
| */ |
| #ifdef CONFIG_HIGHMEM |
| void zero_user_segments(struct page *page, unsigned start1, unsigned end1, |
| unsigned start2, unsigned end2); |
| #else |
| static inline void zero_user_segments(struct page *page, |
| unsigned start1, unsigned end1, |
| unsigned start2, unsigned end2) |
| { |
| void *kaddr = kmap_local_page(page); |
| unsigned int i; |
| |
| BUG_ON(end1 > page_size(page) || end2 > page_size(page)); |
| |
| if (end1 > start1) |
| memset(kaddr + start1, 0, end1 - start1); |
| |
| if (end2 > start2) |
| memset(kaddr + start2, 0, end2 - start2); |
| |
| kunmap_local(kaddr); |
| for (i = 0; i < compound_nr(page); i++) |
| flush_dcache_page(page + i); |
| } |
| #endif |
| |
| static inline void zero_user_segment(struct page *page, |
| unsigned start, unsigned end) |
| { |
| zero_user_segments(page, start, end, 0, 0); |
| } |
| |
| static inline void zero_user(struct page *page, |
| unsigned start, unsigned size) |
| { |
| zero_user_segments(page, start, start + size, 0, 0); |
| } |
| |
| #ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE |
| |
| static inline void copy_user_highpage(struct page *to, struct page *from, |
| unsigned long vaddr, struct vm_area_struct *vma) |
| { |
| char *vfrom, *vto; |
| |
| vfrom = kmap_local_page(from); |
| vto = kmap_local_page(to); |
| copy_user_page(vto, vfrom, vaddr, to); |
| kmsan_unpoison_memory(page_address(to), PAGE_SIZE); |
| kunmap_local(vto); |
| kunmap_local(vfrom); |
| } |
| |
| #endif |
| |
| #ifndef __HAVE_ARCH_COPY_HIGHPAGE |
| |
| static inline void copy_highpage(struct page *to, struct page *from) |
| { |
| char *vfrom, *vto; |
| |
| vfrom = kmap_local_page(from); |
| vto = kmap_local_page(to); |
| copy_page(vto, vfrom); |
| kmsan_copy_page_meta(to, from); |
| kunmap_local(vto); |
| kunmap_local(vfrom); |
| } |
| |
| #endif |
| |
| #ifdef copy_mc_to_kernel |
| /* |
| * If architecture supports machine check exception handling, define the |
| * #MC versions of copy_user_highpage and copy_highpage. They copy a memory |
| * page with #MC in source page (@from) handled, and return the number |
| * of bytes not copied if there was a #MC, otherwise 0 for success. |
| */ |
| static inline int copy_mc_user_highpage(struct page *to, struct page *from, |
| unsigned long vaddr, struct vm_area_struct *vma) |
| { |
| unsigned long ret; |
| char *vfrom, *vto; |
| |
| vfrom = kmap_local_page(from); |
| vto = kmap_local_page(to); |
| ret = copy_mc_to_kernel(vto, vfrom, PAGE_SIZE); |
| if (!ret) |
| kmsan_unpoison_memory(page_address(to), PAGE_SIZE); |
| kunmap_local(vto); |
| kunmap_local(vfrom); |
| |
| if (ret) |
| memory_failure_queue(page_to_pfn(from), 0); |
| |
| return ret; |
| } |
| |
| static inline int copy_mc_highpage(struct page *to, struct page *from) |
| { |
| unsigned long ret; |
| char *vfrom, *vto; |
| |
| vfrom = kmap_local_page(from); |
| vto = kmap_local_page(to); |
| ret = copy_mc_to_kernel(vto, vfrom, PAGE_SIZE); |
| if (!ret) |
| kmsan_copy_page_meta(to, from); |
| kunmap_local(vto); |
| kunmap_local(vfrom); |
| |
| if (ret) |
| memory_failure_queue(page_to_pfn(from), 0); |
| |
| return ret; |
| } |
| #else |
| static inline int copy_mc_user_highpage(struct page *to, struct page *from, |
| unsigned long vaddr, struct vm_area_struct *vma) |
| { |
| copy_user_highpage(to, from, vaddr, vma); |
| return 0; |
| } |
| |
| static inline int copy_mc_highpage(struct page *to, struct page *from) |
| { |
| copy_highpage(to, from); |
| return 0; |
| } |
| #endif |
| |
| static inline void memcpy_page(struct page *dst_page, size_t dst_off, |
| struct page *src_page, size_t src_off, |
| size_t len) |
| { |
| char *dst = kmap_local_page(dst_page); |
| char *src = kmap_local_page(src_page); |
| |
| VM_BUG_ON(dst_off + len > PAGE_SIZE || src_off + len > PAGE_SIZE); |
| memcpy(dst + dst_off, src + src_off, len); |
| kunmap_local(src); |
| kunmap_local(dst); |
| } |
| |
| static inline void memset_page(struct page *page, size_t offset, int val, |
| size_t len) |
| { |
| char *addr = kmap_local_page(page); |
| |
| VM_BUG_ON(offset + len > PAGE_SIZE); |
| memset(addr + offset, val, len); |
| kunmap_local(addr); |
| } |
| |
| static inline void memcpy_from_page(char *to, struct page *page, |
| size_t offset, size_t len) |
| { |
| char *from = kmap_local_page(page); |
| |
| VM_BUG_ON(offset + len > PAGE_SIZE); |
| memcpy(to, from + offset, len); |
| kunmap_local(from); |
| } |
| |
| static inline void memcpy_to_page(struct page *page, size_t offset, |
| const char *from, size_t len) |
| { |
| char *to = kmap_local_page(page); |
| |
| VM_BUG_ON(offset + len > PAGE_SIZE); |
| memcpy(to + offset, from, len); |
| flush_dcache_page(page); |
| kunmap_local(to); |
| } |
| |
| static inline void memzero_page(struct page *page, size_t offset, size_t len) |
| { |
| char *addr = kmap_local_page(page); |
| |
| VM_BUG_ON(offset + len > PAGE_SIZE); |
| memset(addr + offset, 0, len); |
| flush_dcache_page(page); |
| kunmap_local(addr); |
| } |
| |
| /** |
| * memcpy_from_folio - Copy a range of bytes from a folio. |
| * @to: The memory to copy to. |
| * @folio: The folio to read from. |
| * @offset: The first byte in the folio to read. |
| * @len: The number of bytes to copy. |
| */ |
| static inline void memcpy_from_folio(char *to, struct folio *folio, |
| size_t offset, size_t len) |
| { |
| VM_BUG_ON(offset + len > folio_size(folio)); |
| |
| do { |
| const char *from = kmap_local_folio(folio, offset); |
| size_t chunk = len; |
| |
| if (folio_test_highmem(folio) && |
| chunk > PAGE_SIZE - offset_in_page(offset)) |
| chunk = PAGE_SIZE - offset_in_page(offset); |
| memcpy(to, from, chunk); |
| kunmap_local(from); |
| |
| to += chunk; |
| offset += chunk; |
| len -= chunk; |
| } while (len > 0); |
| } |
| |
| /** |
| * memcpy_to_folio - Copy a range of bytes to a folio. |
| * @folio: The folio to write to. |
| * @offset: The first byte in the folio to store to. |
| * @from: The memory to copy from. |
| * @len: The number of bytes to copy. |
| */ |
| static inline void memcpy_to_folio(struct folio *folio, size_t offset, |
| const char *from, size_t len) |
| { |
| VM_BUG_ON(offset + len > folio_size(folio)); |
| |
| do { |
| char *to = kmap_local_folio(folio, offset); |
| size_t chunk = len; |
| |
| if (folio_test_highmem(folio) && |
| chunk > PAGE_SIZE - offset_in_page(offset)) |
| chunk = PAGE_SIZE - offset_in_page(offset); |
| memcpy(to, from, chunk); |
| kunmap_local(to); |
| |
| from += chunk; |
| offset += chunk; |
| len -= chunk; |
| } while (len > 0); |
| |
| flush_dcache_folio(folio); |
| } |
| |
| /** |
| * folio_zero_tail - Zero the tail of a folio. |
| * @folio: The folio to zero. |
| * @offset: The byte offset in the folio to start zeroing at. |
| * @kaddr: The address the folio is currently mapped to. |
| * |
| * If you have already used kmap_local_folio() to map a folio, written |
| * some data to it and now need to zero the end of the folio (and flush |
| * the dcache), you can use this function. If you do not have the |
| * folio kmapped (eg the folio has been partially populated by DMA), |
| * use folio_zero_range() or folio_zero_segment() instead. |
| * |
| * Return: An address which can be passed to kunmap_local(). |
| */ |
| static inline __must_check void *folio_zero_tail(struct folio *folio, |
| size_t offset, void *kaddr) |
| { |
| size_t len = folio_size(folio) - offset; |
| |
| if (folio_test_highmem(folio)) { |
| size_t max = PAGE_SIZE - offset_in_page(offset); |
| |
| while (len > max) { |
| memset(kaddr, 0, max); |
| kunmap_local(kaddr); |
| len -= max; |
| offset += max; |
| max = PAGE_SIZE; |
| kaddr = kmap_local_folio(folio, offset); |
| } |
| } |
| |
| memset(kaddr, 0, len); |
| flush_dcache_folio(folio); |
| |
| return kaddr; |
| } |
| |
| /** |
| * folio_fill_tail - Copy some data to a folio and pad with zeroes. |
| * @folio: The destination folio. |
| * @offset: The offset into @folio at which to start copying. |
| * @from: The data to copy. |
| * @len: How many bytes of data to copy. |
| * |
| * This function is most useful for filesystems which support inline data. |
| * When they want to copy data from the inode into the page cache, this |
| * function does everything for them. It supports large folios even on |
| * HIGHMEM configurations. |
| */ |
| static inline void folio_fill_tail(struct folio *folio, size_t offset, |
| const char *from, size_t len) |
| { |
| char *to = kmap_local_folio(folio, offset); |
| |
| VM_BUG_ON(offset + len > folio_size(folio)); |
| |
| if (folio_test_highmem(folio)) { |
| size_t max = PAGE_SIZE - offset_in_page(offset); |
| |
| while (len > max) { |
| memcpy(to, from, max); |
| kunmap_local(to); |
| len -= max; |
| from += max; |
| offset += max; |
| max = PAGE_SIZE; |
| to = kmap_local_folio(folio, offset); |
| } |
| } |
| |
| memcpy(to, from, len); |
| to = folio_zero_tail(folio, offset + len, to + len); |
| kunmap_local(to); |
| } |
| |
| /** |
| * memcpy_from_file_folio - Copy some bytes from a file folio. |
| * @to: The destination buffer. |
| * @folio: The folio to copy from. |
| * @pos: The position in the file. |
| * @len: The maximum number of bytes to copy. |
| * |
| * Copy up to @len bytes from this folio. This may be limited by PAGE_SIZE |
| * if the folio comes from HIGHMEM, and by the size of the folio. |
| * |
| * Return: The number of bytes copied from the folio. |
| */ |
| static inline size_t memcpy_from_file_folio(char *to, struct folio *folio, |
| loff_t pos, size_t len) |
| { |
| size_t offset = offset_in_folio(folio, pos); |
| char *from = kmap_local_folio(folio, offset); |
| |
| if (folio_test_highmem(folio)) { |
| offset = offset_in_page(offset); |
| len = min_t(size_t, len, PAGE_SIZE - offset); |
| } else |
| len = min(len, folio_size(folio) - offset); |
| |
| memcpy(to, from, len); |
| kunmap_local(from); |
| |
| return len; |
| } |
| |
| /** |
| * folio_zero_segments() - Zero two byte ranges in a folio. |
| * @folio: The folio to write to. |
| * @start1: The first byte to zero. |
| * @xend1: One more than the last byte in the first range. |
| * @start2: The first byte to zero in the second range. |
| * @xend2: One more than the last byte in the second range. |
| */ |
| static inline void folio_zero_segments(struct folio *folio, |
| size_t start1, size_t xend1, size_t start2, size_t xend2) |
| { |
| zero_user_segments(&folio->page, start1, xend1, start2, xend2); |
| } |
| |
| /** |
| * folio_zero_segment() - Zero a byte range in a folio. |
| * @folio: The folio to write to. |
| * @start: The first byte to zero. |
| * @xend: One more than the last byte to zero. |
| */ |
| static inline void folio_zero_segment(struct folio *folio, |
| size_t start, size_t xend) |
| { |
| zero_user_segments(&folio->page, start, xend, 0, 0); |
| } |
| |
| /** |
| * folio_zero_range() - Zero a byte range in a folio. |
| * @folio: The folio to write to. |
| * @start: The first byte to zero. |
| * @length: The number of bytes to zero. |
| */ |
| static inline void folio_zero_range(struct folio *folio, |
| size_t start, size_t length) |
| { |
| zero_user_segments(&folio->page, start, start + length, 0, 0); |
| } |
| |
| /** |
| * folio_release_kmap - Unmap a folio and drop a refcount. |
| * @folio: The folio to release. |
| * @addr: The address previously returned by a call to kmap_local_folio(). |
| * |
| * It is common, eg in directory handling to kmap a folio. This function |
| * unmaps the folio and drops the refcount that was being held to keep the |
| * folio alive while we accessed it. |
| */ |
| static inline void folio_release_kmap(struct folio *folio, void *addr) |
| { |
| kunmap_local(addr); |
| folio_put(folio); |
| } |
| |
| static inline void unmap_and_put_page(struct page *page, void *addr) |
| { |
| folio_release_kmap(page_folio(page), addr); |
| } |
| |
| #endif /* _LINUX_HIGHMEM_H */ |