| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  *  Copyright (c) by Uros Bizjak <[email protected]> | 
 |  *                    | 
 |  *  Routines for OPL2/OPL3/OPL4 control | 
 |  */ | 
 |  | 
 | #include <linux/slab.h> | 
 | #include <linux/export.h> | 
 | #include <linux/nospec.h> | 
 | #include <sound/opl3.h> | 
 | #include <sound/asound_fm.h> | 
 | #include "opl3_voice.h" | 
 |  | 
 | #if IS_ENABLED(CONFIG_SND_SEQUENCER) | 
 | #define OPL3_SUPPORT_SYNTH | 
 | #endif | 
 |  | 
 | /* | 
 |  *    There is 18 possible 2 OP voices | 
 |  *      (9 in the left and 9 in the right). | 
 |  *      The first OP is the modulator and 2nd is the carrier. | 
 |  * | 
 |  *      The first three voices in the both sides may be connected | 
 |  *      with another voice to a 4 OP voice. For example voice 0 | 
 |  *      can be connected with voice 3. The operators of voice 3 are | 
 |  *      used as operators 3 and 4 of the new 4 OP voice. | 
 |  *      In this case the 2 OP voice number 0 is the 'first half' and | 
 |  *      voice 3 is the second. | 
 |  */ | 
 |  | 
 |  | 
 | /* | 
 |  *    Register offset table for OPL2/3 voices, | 
 |  *    OPL2 / one OPL3 register array side only | 
 |  */ | 
 |  | 
 | char snd_opl3_regmap[MAX_OPL2_VOICES][4] = | 
 | { | 
 | /*	  OP1   OP2   OP3   OP4		*/ | 
 | /*	 ------------------------	*/ | 
 | 	{ 0x00, 0x03, 0x08, 0x0b }, | 
 | 	{ 0x01, 0x04, 0x09, 0x0c }, | 
 | 	{ 0x02, 0x05, 0x0a, 0x0d }, | 
 |  | 
 | 	{ 0x08, 0x0b, 0x00, 0x00 }, | 
 | 	{ 0x09, 0x0c, 0x00, 0x00 }, | 
 | 	{ 0x0a, 0x0d, 0x00, 0x00 }, | 
 |  | 
 | 	{ 0x10, 0x13, 0x00, 0x00 },	/* used by percussive voices */ | 
 | 	{ 0x11, 0x14, 0x00, 0x00 },	/* if the percussive mode */ | 
 | 	{ 0x12, 0x15, 0x00, 0x00 }	/* is selected (only left reg block) */ | 
 | }; | 
 |  | 
 | EXPORT_SYMBOL(snd_opl3_regmap); | 
 |  | 
 | /* | 
 |  * prototypes | 
 |  */ | 
 | static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note); | 
 | static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice); | 
 | static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params); | 
 | static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode); | 
 | static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection); | 
 |  | 
 | /* ------------------------------ */ | 
 |  | 
 | /* | 
 |  * open the device exclusively | 
 |  */ | 
 | int snd_opl3_open(struct snd_hwdep * hw, struct file *file) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * ioctl for hwdep device: | 
 |  */ | 
 | int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, | 
 | 		   unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct snd_opl3 *opl3 = hw->private_data; | 
 | 	void __user *argp = (void __user *)arg; | 
 |  | 
 | 	if (snd_BUG_ON(!opl3)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	switch (cmd) { | 
 | 		/* get information */ | 
 | 	case SNDRV_DM_FM_IOCTL_INFO: | 
 | 		{ | 
 | 			struct snd_dm_fm_info info; | 
 |  | 
 | 			memset(&info, 0, sizeof(info)); | 
 |  | 
 | 			info.fm_mode = opl3->fm_mode; | 
 | 			info.rhythm = opl3->rhythm; | 
 | 			if (copy_to_user(argp, &info, sizeof(struct snd_dm_fm_info))) | 
 | 				return -EFAULT; | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_RESET: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_RESET: | 
 | #endif | 
 | 		snd_opl3_reset(opl3); | 
 | 		return 0; | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_PLAY_NOTE: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE: | 
 | #endif | 
 | 		{ | 
 | 			struct snd_dm_fm_note note; | 
 | 			if (copy_from_user(¬e, argp, sizeof(struct snd_dm_fm_note))) | 
 | 				return -EFAULT; | 
 | 			return snd_opl3_play_note(opl3, ¬e); | 
 | 		} | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_SET_VOICE: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_SET_VOICE: | 
 | #endif | 
 | 		{ | 
 | 			struct snd_dm_fm_voice voice; | 
 | 			if (copy_from_user(&voice, argp, sizeof(struct snd_dm_fm_voice))) | 
 | 				return -EFAULT; | 
 | 			return snd_opl3_set_voice(opl3, &voice); | 
 | 		} | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_SET_PARAMS: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS: | 
 | #endif | 
 | 		{ | 
 | 			struct snd_dm_fm_params params; | 
 | 			if (copy_from_user(¶ms, argp, sizeof(struct snd_dm_fm_params))) | 
 | 				return -EFAULT; | 
 | 			return snd_opl3_set_params(opl3, ¶ms); | 
 | 		} | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_SET_MODE: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_SET_MODE: | 
 | #endif | 
 | 		return snd_opl3_set_mode(opl3, (int) arg); | 
 |  | 
 | 	case SNDRV_DM_FM_IOCTL_SET_CONNECTION: | 
 | #ifdef CONFIG_SND_OSSEMUL | 
 | 	case SNDRV_DM_FM_OSS_IOCTL_SET_OPL: | 
 | #endif | 
 | 		return snd_opl3_set_connection(opl3, (int) arg); | 
 |  | 
 | #ifdef OPL3_SUPPORT_SYNTH | 
 | 	case SNDRV_DM_FM_IOCTL_CLEAR_PATCHES: | 
 | 		snd_opl3_clear_patches(opl3); | 
 | 		return 0; | 
 | #endif | 
 |  | 
 | 	default: | 
 | 		dev_dbg(opl3->card->dev, "unknown IOCTL: 0x%x\n", cmd); | 
 | 	} | 
 | 	return -ENOTTY; | 
 | } | 
 |  | 
 | /* | 
 |  * close the device | 
 |  */ | 
 | int snd_opl3_release(struct snd_hwdep * hw, struct file *file) | 
 | { | 
 | 	struct snd_opl3 *opl3 = hw->private_data; | 
 |  | 
 | 	snd_opl3_reset(opl3); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef OPL3_SUPPORT_SYNTH | 
 | /* | 
 |  * write the device - load patches | 
 |  */ | 
 | long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, | 
 | 		    loff_t *offset) | 
 | { | 
 | 	struct snd_opl3 *opl3 = hw->private_data; | 
 | 	long result = 0; | 
 | 	int err = 0; | 
 | 	struct sbi_patch inst; | 
 |  | 
 | 	while (count >= sizeof(inst)) { | 
 | 		unsigned char type; | 
 | 		if (copy_from_user(&inst, buf, sizeof(inst))) | 
 | 			return -EFAULT; | 
 | 		if (!memcmp(inst.key, FM_KEY_SBI, 4) || | 
 | 		    !memcmp(inst.key, FM_KEY_2OP, 4)) | 
 | 			type = FM_PATCH_OPL2; | 
 | 		else if (!memcmp(inst.key, FM_KEY_4OP, 4)) | 
 | 			type = FM_PATCH_OPL3; | 
 | 		else /* invalid type */ | 
 | 			break; | 
 | 		err = snd_opl3_load_patch(opl3, inst.prog, inst.bank, type, | 
 | 					  inst.name, inst.extension, | 
 | 					  inst.data); | 
 | 		if (err < 0) | 
 | 			break; | 
 | 		result += sizeof(inst); | 
 | 		count -= sizeof(inst); | 
 | 	} | 
 | 	return result > 0 ? result : err; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Patch management | 
 |  */ | 
 |  | 
 | /* offsets for SBI params */ | 
 | #define AM_VIB		0 | 
 | #define KSL_LEVEL	2 | 
 | #define ATTACK_DECAY	4 | 
 | #define SUSTAIN_RELEASE	6 | 
 | #define WAVE_SELECT	8 | 
 |  | 
 | /* offset for SBI instrument */ | 
 | #define CONNECTION	10 | 
 | #define OFFSET_4OP	11 | 
 |  | 
 | /* | 
 |  * load a patch, obviously. | 
 |  * | 
 |  * loaded on the given program and bank numbers with the given type | 
 |  * (FM_PATCH_OPLx). | 
 |  * data is the pointer of SBI record _without_ header (key and name). | 
 |  * name is the name string of the patch. | 
 |  * ext is the extension data of 7 bytes long (stored in name of SBI | 
 |  * data up to offset 25), or NULL to skip. | 
 |  * return 0 if successful or a negative error code. | 
 |  */ | 
 | int snd_opl3_load_patch(struct snd_opl3 *opl3, | 
 | 			int prog, int bank, int type, | 
 | 			const char *name, | 
 | 			const unsigned char *ext, | 
 | 			const unsigned char *data) | 
 | { | 
 | 	struct fm_patch *patch; | 
 | 	int i; | 
 |  | 
 | 	patch = snd_opl3_find_patch(opl3, prog, bank, 1); | 
 | 	if (!patch) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	patch->type = type; | 
 |  | 
 | 	for (i = 0; i < 2; i++) { | 
 | 		patch->inst.op[i].am_vib = data[AM_VIB + i]; | 
 | 		patch->inst.op[i].ksl_level = data[KSL_LEVEL + i]; | 
 | 		patch->inst.op[i].attack_decay = data[ATTACK_DECAY + i]; | 
 | 		patch->inst.op[i].sustain_release = data[SUSTAIN_RELEASE + i]; | 
 | 		patch->inst.op[i].wave_select = data[WAVE_SELECT + i]; | 
 | 	} | 
 | 	patch->inst.feedback_connection[0] = data[CONNECTION]; | 
 |  | 
 | 	if (type == FM_PATCH_OPL3) { | 
 | 		for (i = 0; i < 2; i++) { | 
 | 			patch->inst.op[i+2].am_vib = | 
 | 				data[OFFSET_4OP + AM_VIB + i]; | 
 | 			patch->inst.op[i+2].ksl_level = | 
 | 				data[OFFSET_4OP + KSL_LEVEL + i]; | 
 | 			patch->inst.op[i+2].attack_decay = | 
 | 				data[OFFSET_4OP + ATTACK_DECAY + i]; | 
 | 			patch->inst.op[i+2].sustain_release = | 
 | 				data[OFFSET_4OP + SUSTAIN_RELEASE + i]; | 
 | 			patch->inst.op[i+2].wave_select = | 
 | 				data[OFFSET_4OP + WAVE_SELECT + i]; | 
 | 		} | 
 | 		patch->inst.feedback_connection[1] = | 
 | 			data[OFFSET_4OP + CONNECTION]; | 
 | 	} | 
 |  | 
 | 	if (ext) { | 
 | 		patch->inst.echo_delay = ext[0]; | 
 | 		patch->inst.echo_atten = ext[1]; | 
 | 		patch->inst.chorus_spread = ext[2]; | 
 | 		patch->inst.trnsps = ext[3]; | 
 | 		patch->inst.fix_dur = ext[4]; | 
 | 		patch->inst.modes = ext[5]; | 
 | 		patch->inst.fix_key = ext[6]; | 
 | 	} | 
 |  | 
 | 	if (name) | 
 | 		strscpy(patch->name, name, sizeof(patch->name)); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(snd_opl3_load_patch); | 
 |  | 
 | /* | 
 |  * find a patch with the given program and bank numbers, returns its pointer | 
 |  * if no matching patch is found and create_patch is set, it creates a | 
 |  * new patch object. | 
 |  */ | 
 | struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, | 
 | 				     int create_patch) | 
 | { | 
 | 	/* pretty dumb hash key */ | 
 | 	unsigned int key = (prog + bank) % OPL3_PATCH_HASH_SIZE; | 
 | 	struct fm_patch *patch; | 
 |  | 
 | 	for (patch = opl3->patch_table[key]; patch; patch = patch->next) { | 
 | 		if (patch->prog == prog && patch->bank == bank) | 
 | 			return patch; | 
 | 	} | 
 | 	if (!create_patch) | 
 | 		return NULL; | 
 |  | 
 | 	patch = kzalloc(sizeof(*patch), GFP_KERNEL); | 
 | 	if (!patch) | 
 | 		return NULL; | 
 | 	patch->prog = prog; | 
 | 	patch->bank = bank; | 
 | 	patch->next = opl3->patch_table[key]; | 
 | 	opl3->patch_table[key] = patch; | 
 | 	return patch; | 
 | } | 
 | EXPORT_SYMBOL(snd_opl3_find_patch); | 
 |  | 
 | /* | 
 |  * Clear all patches of the given OPL3 instance | 
 |  */ | 
 | void snd_opl3_clear_patches(struct snd_opl3 *opl3) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i <  OPL3_PATCH_HASH_SIZE; i++) { | 
 | 		struct fm_patch *patch, *next; | 
 | 		for (patch = opl3->patch_table[i]; patch; patch = next) { | 
 | 			next = patch->next; | 
 | 			kfree(patch); | 
 | 		} | 
 | 	} | 
 | 	memset(opl3->patch_table, 0, sizeof(opl3->patch_table)); | 
 | } | 
 | #endif /* OPL3_SUPPORT_SYNTH */ | 
 |  | 
 | /* ------------------------------ */ | 
 |  | 
 | void snd_opl3_reset(struct snd_opl3 * opl3) | 
 | { | 
 | 	unsigned short opl3_reg; | 
 |  | 
 | 	unsigned short reg_side; | 
 | 	unsigned char voice_offset; | 
 |  | 
 | 	int max_voices, i; | 
 |  | 
 | 	max_voices = (opl3->hardware < OPL3_HW_OPL3) ? | 
 | 		MAX_OPL2_VOICES : MAX_OPL3_VOICES; | 
 |  | 
 | 	for (i = 0; i < max_voices; i++) { | 
 | 		/* Get register array side and offset of voice */ | 
 | 		if (i < MAX_OPL2_VOICES) { | 
 | 			/* Left register block for voices 0 .. 8 */ | 
 | 			reg_side = OPL3_LEFT; | 
 | 			voice_offset = i; | 
 | 		} else { | 
 | 			/* Right register block for voices 9 .. 17 */ | 
 | 			reg_side = OPL3_RIGHT; | 
 | 			voice_offset = i - MAX_OPL2_VOICES; | 
 | 		} | 
 | 		opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][0]); | 
 | 		opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 1 volume */ | 
 | 		opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][1]); | 
 | 		opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 2 volume */ | 
 |  | 
 | 		opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); | 
 | 		opl3->command(opl3, opl3_reg, 0x00);	/* Note off */ | 
 | 	} | 
 |  | 
 | 	opl3->max_voices = MAX_OPL2_VOICES; | 
 | 	opl3->fm_mode = SNDRV_DM_FM_MODE_OPL2; | 
 |  | 
 | 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT); | 
 | 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);	/* Melodic mode */ | 
 | 	opl3->rhythm = 0; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(snd_opl3_reset); | 
 |  | 
 | static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note) | 
 | { | 
 | 	unsigned short reg_side; | 
 | 	unsigned char voice_offset; | 
 |  | 
 | 	unsigned short opl3_reg; | 
 | 	unsigned char reg_val; | 
 |  | 
 | 	/* Voices 0 -  8 in OPL2 mode */ | 
 | 	/* Voices 0 - 17 in OPL3 mode */ | 
 | 	if (note->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? | 
 | 			    MAX_OPL3_VOICES : MAX_OPL2_VOICES)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Get register array side and offset of voice */ | 
 | 	if (note->voice < MAX_OPL2_VOICES) { | 
 | 		/* Left register block for voices 0 .. 8 */ | 
 | 		reg_side = OPL3_LEFT; | 
 | 		voice_offset = note->voice; | 
 | 	} else { | 
 | 		/* Right register block for voices 9 .. 17 */ | 
 | 		reg_side = OPL3_RIGHT; | 
 | 		voice_offset = note->voice - MAX_OPL2_VOICES; | 
 | 	} | 
 |  | 
 | 	/* Set lower 8 bits of note frequency */ | 
 | 	reg_val = (unsigned char) note->fnum; | 
 | 	opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 | 	 | 
 | 	reg_val = 0x00; | 
 | 	/* Set output sound flag */ | 
 | 	if (note->key_on) | 
 | 		reg_val |= OPL3_KEYON_BIT; | 
 | 	/* Set octave */ | 
 | 	reg_val |= (note->octave << 2) & OPL3_BLOCKNUM_MASK; | 
 | 	/* Set higher 2 bits of note frequency */ | 
 | 	reg_val |= (unsigned char) (note->fnum >> 8) & OPL3_FNUM_HIGH_MASK; | 
 |  | 
 | 	/* Set OPL3 KEYON_BLOCK register of requested voice */  | 
 | 	opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice) | 
 | { | 
 | 	unsigned short reg_side; | 
 | 	unsigned char op_offset; | 
 | 	unsigned char voice_offset, voice_op; | 
 |  | 
 | 	unsigned short opl3_reg; | 
 | 	unsigned char reg_val; | 
 |  | 
 | 	/* Only operators 1 and 2 */ | 
 | 	if (voice->op > 1) | 
 | 		return -EINVAL; | 
 | 	/* Voices 0 -  8 in OPL2 mode */ | 
 | 	/* Voices 0 - 17 in OPL3 mode */ | 
 | 	if (voice->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? | 
 | 			     MAX_OPL3_VOICES : MAX_OPL2_VOICES)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Get register array side and offset of voice */ | 
 | 	if (voice->voice < MAX_OPL2_VOICES) { | 
 | 		/* Left register block for voices 0 .. 8 */ | 
 | 		reg_side = OPL3_LEFT; | 
 | 		voice_offset = voice->voice; | 
 | 	} else { | 
 | 		/* Right register block for voices 9 .. 17 */ | 
 | 		reg_side = OPL3_RIGHT; | 
 | 		voice_offset = voice->voice - MAX_OPL2_VOICES; | 
 | 	} | 
 | 	/* Get register offset of operator */ | 
 | 	voice_offset = array_index_nospec(voice_offset, MAX_OPL2_VOICES); | 
 | 	voice_op = array_index_nospec(voice->op, 4); | 
 | 	op_offset = snd_opl3_regmap[voice_offset][voice_op]; | 
 |  | 
 | 	reg_val = 0x00; | 
 | 	/* Set amplitude modulation (tremolo) effect */ | 
 | 	if (voice->am) | 
 | 		reg_val |= OPL3_TREMOLO_ON; | 
 | 	/* Set vibrato effect */ | 
 | 	if (voice->vibrato) | 
 | 		reg_val |= OPL3_VIBRATO_ON; | 
 | 	/* Set sustaining sound phase */ | 
 | 	if (voice->do_sustain) | 
 | 		reg_val |= OPL3_SUSTAIN_ON; | 
 | 	/* Set keyboard scaling bit */  | 
 | 	if (voice->kbd_scale) | 
 | 		reg_val |= OPL3_KSR; | 
 | 	/* Set harmonic or frequency multiplier */ | 
 | 	reg_val |= voice->harmonic & OPL3_MULTIPLE_MASK; | 
 |  | 
 | 	/* Set OPL3 AM_VIB register of requested voice/operator */  | 
 | 	opl3_reg = reg_side | (OPL3_REG_AM_VIB + op_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	/* Set decreasing volume of higher notes */ | 
 | 	reg_val = (voice->scale_level << 6) & OPL3_KSL_MASK; | 
 | 	/* Set output volume */ | 
 | 	reg_val |= ~voice->volume & OPL3_TOTAL_LEVEL_MASK; | 
 |  | 
 | 	/* Set OPL3 KSL_LEVEL register of requested voice/operator */  | 
 | 	opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + op_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	/* Set attack phase level */ | 
 | 	reg_val = (voice->attack << 4) & OPL3_ATTACK_MASK; | 
 | 	/* Set decay phase level */ | 
 | 	reg_val |= voice->decay & OPL3_DECAY_MASK; | 
 |  | 
 | 	/* Set OPL3 ATTACK_DECAY register of requested voice/operator */  | 
 | 	opl3_reg = reg_side | (OPL3_REG_ATTACK_DECAY + op_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	/* Set sustain phase level */ | 
 | 	reg_val = (voice->sustain << 4) & OPL3_SUSTAIN_MASK; | 
 | 	/* Set release phase level */ | 
 | 	reg_val |= voice->release & OPL3_RELEASE_MASK; | 
 |  | 
 | 	/* Set OPL3 SUSTAIN_RELEASE register of requested voice/operator */  | 
 | 	opl3_reg = reg_side | (OPL3_REG_SUSTAIN_RELEASE + op_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	/* Set inter-operator feedback */ | 
 | 	reg_val = (voice->feedback << 1) & OPL3_FEEDBACK_MASK; | 
 | 	/* Set inter-operator connection */ | 
 | 	if (voice->connection) | 
 | 		reg_val |= OPL3_CONNECTION_BIT; | 
 | 	/* OPL-3 only */ | 
 | 	if (opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) { | 
 | 		if (voice->left) | 
 | 			reg_val |= OPL3_VOICE_TO_LEFT; | 
 | 		if (voice->right) | 
 | 			reg_val |= OPL3_VOICE_TO_RIGHT; | 
 | 	} | 
 | 	/* Feedback/connection bits are applicable to voice */ | 
 | 	opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	/* Select waveform */ | 
 | 	reg_val = voice->waveform & OPL3_WAVE_SELECT_MASK; | 
 | 	opl3_reg = reg_side | (OPL3_REG_WAVE_SELECT + op_offset); | 
 | 	opl3->command(opl3, opl3_reg, reg_val); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params) | 
 | { | 
 | 	unsigned char reg_val; | 
 |  | 
 | 	reg_val = 0x00; | 
 | 	/* Set keyboard split method */ | 
 | 	if (params->kbd_split) | 
 | 		reg_val |= OPL3_KEYBOARD_SPLIT; | 
 | 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_KBD_SPLIT, reg_val); | 
 |  | 
 | 	reg_val = 0x00; | 
 | 	/* Set amplitude modulation (tremolo) depth */ | 
 | 	if (params->am_depth) | 
 | 		reg_val |= OPL3_TREMOLO_DEPTH; | 
 | 	/* Set vibrato depth */ | 
 | 	if (params->vib_depth) | 
 | 		reg_val |= OPL3_VIBRATO_DEPTH; | 
 | 	/* Set percussion mode */ | 
 | 	if (params->rhythm) { | 
 | 		reg_val |= OPL3_PERCUSSION_ENABLE; | 
 | 		opl3->rhythm = 1; | 
 | 	} else { | 
 | 		opl3->rhythm = 0; | 
 | 	} | 
 | 	/* Play percussion instruments */ | 
 | 	if (params->bass) | 
 | 		reg_val |= OPL3_BASSDRUM_ON; | 
 | 	if (params->snare) | 
 | 		reg_val |= OPL3_SNAREDRUM_ON; | 
 | 	if (params->tomtom) | 
 | 		reg_val |= OPL3_TOMTOM_ON; | 
 | 	if (params->cymbal) | 
 | 		reg_val |= OPL3_CYMBAL_ON; | 
 | 	if (params->hihat) | 
 | 		reg_val |= OPL3_HIHAT_ON; | 
 |  | 
 | 	opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, reg_val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode) | 
 | { | 
 | 	if ((mode == SNDRV_DM_FM_MODE_OPL3) && (opl3->hardware < OPL3_HW_OPL3)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	opl3->fm_mode = mode; | 
 | 	if (opl3->hardware >= OPL3_HW_OPL3) | 
 | 		opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, 0x00);	/* Clear 4-op connections */ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection) | 
 | { | 
 | 	unsigned char reg_val; | 
 |  | 
 | 	/* OPL-3 only */ | 
 | 	if (opl3->fm_mode != SNDRV_DM_FM_MODE_OPL3) | 
 | 		return -EINVAL; | 
 |  | 
 | 	reg_val = connection & (OPL3_RIGHT_4OP_0 | OPL3_RIGHT_4OP_1 | OPL3_RIGHT_4OP_2 | | 
 | 				OPL3_LEFT_4OP_0 | OPL3_LEFT_4OP_1 | OPL3_LEFT_4OP_2); | 
 | 	/* Set 4-op connections */ | 
 | 	opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, reg_val); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  |