Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Danilo Krummrich | 9ee0a05 | 2017-08-28 09:59:20 -0700 | [diff] [blame] | 2 | /* |
| 3 | * GPIO based serio bus driver for bit banging the PS/2 protocol |
| 4 | * |
| 5 | * Author: Danilo Krummrich <danilokrummrich@dk-develop.de> |
Danilo Krummrich | 9ee0a05 | 2017-08-28 09:59:20 -0700 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <linux/gpio/consumer.h> |
| 9 | #include <linux/interrupt.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/serio.h> |
| 12 | #include <linux/slab.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/workqueue.h> |
| 15 | #include <linux/completion.h> |
| 16 | #include <linux/mutex.h> |
| 17 | #include <linux/preempt.h> |
| 18 | #include <linux/property.h> |
| 19 | #include <linux/of.h> |
| 20 | #include <linux/jiffies.h> |
| 21 | #include <linux/delay.h> |
| 22 | |
| 23 | #define DRIVER_NAME "ps2-gpio" |
| 24 | |
| 25 | #define PS2_MODE_RX 0 |
| 26 | #define PS2_MODE_TX 1 |
| 27 | |
| 28 | #define PS2_START_BIT 0 |
| 29 | #define PS2_DATA_BIT0 1 |
| 30 | #define PS2_DATA_BIT1 2 |
| 31 | #define PS2_DATA_BIT2 3 |
| 32 | #define PS2_DATA_BIT3 4 |
| 33 | #define PS2_DATA_BIT4 5 |
| 34 | #define PS2_DATA_BIT5 6 |
| 35 | #define PS2_DATA_BIT6 7 |
| 36 | #define PS2_DATA_BIT7 8 |
| 37 | #define PS2_PARITY_BIT 9 |
| 38 | #define PS2_STOP_BIT 10 |
| 39 | #define PS2_TX_TIMEOUT 11 |
| 40 | #define PS2_ACK_BIT 12 |
| 41 | |
| 42 | #define PS2_DEV_RET_ACK 0xfa |
| 43 | #define PS2_DEV_RET_NACK 0xfe |
| 44 | |
| 45 | #define PS2_CMD_RESEND 0xfe |
| 46 | |
| 47 | struct ps2_gpio_data { |
| 48 | struct device *dev; |
| 49 | struct serio *serio; |
| 50 | unsigned char mode; |
| 51 | struct gpio_desc *gpio_clk; |
| 52 | struct gpio_desc *gpio_data; |
| 53 | bool write_enable; |
| 54 | int irq; |
| 55 | unsigned char rx_cnt; |
| 56 | unsigned char rx_byte; |
| 57 | unsigned char tx_cnt; |
| 58 | unsigned char tx_byte; |
| 59 | struct completion tx_done; |
| 60 | struct mutex tx_mutex; |
| 61 | struct delayed_work tx_work; |
| 62 | }; |
| 63 | |
| 64 | static int ps2_gpio_open(struct serio *serio) |
| 65 | { |
| 66 | struct ps2_gpio_data *drvdata = serio->port_data; |
| 67 | |
| 68 | enable_irq(drvdata->irq); |
| 69 | return 0; |
| 70 | } |
| 71 | |
| 72 | static void ps2_gpio_close(struct serio *serio) |
| 73 | { |
| 74 | struct ps2_gpio_data *drvdata = serio->port_data; |
| 75 | |
Dmitry Torokhov | 33a841c | 2019-02-07 14:22:42 -0800 | [diff] [blame] | 76 | flush_delayed_work(&drvdata->tx_work); |
Danilo Krummrich | 9ee0a05 | 2017-08-28 09:59:20 -0700 | [diff] [blame] | 77 | disable_irq(drvdata->irq); |
| 78 | } |
| 79 | |
| 80 | static int __ps2_gpio_write(struct serio *serio, unsigned char val) |
| 81 | { |
| 82 | struct ps2_gpio_data *drvdata = serio->port_data; |
| 83 | |
| 84 | disable_irq_nosync(drvdata->irq); |
| 85 | gpiod_direction_output(drvdata->gpio_clk, 0); |
| 86 | |
| 87 | drvdata->mode = PS2_MODE_TX; |
| 88 | drvdata->tx_byte = val; |
| 89 | |
| 90 | schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); |
| 91 | |
| 92 | return 0; |
| 93 | } |
| 94 | |
| 95 | static int ps2_gpio_write(struct serio *serio, unsigned char val) |
| 96 | { |
| 97 | struct ps2_gpio_data *drvdata = serio->port_data; |
| 98 | int ret = 0; |
| 99 | |
| 100 | if (in_task()) { |
| 101 | mutex_lock(&drvdata->tx_mutex); |
| 102 | __ps2_gpio_write(serio, val); |
| 103 | if (!wait_for_completion_timeout(&drvdata->tx_done, |
| 104 | msecs_to_jiffies(10000))) |
| 105 | ret = SERIO_TIMEOUT; |
| 106 | mutex_unlock(&drvdata->tx_mutex); |
| 107 | } else { |
| 108 | __ps2_gpio_write(serio, val); |
| 109 | } |
| 110 | |
| 111 | return ret; |
| 112 | } |
| 113 | |
| 114 | static void ps2_gpio_tx_work_fn(struct work_struct *work) |
| 115 | { |
| 116 | struct delayed_work *dwork = to_delayed_work(work); |
| 117 | struct ps2_gpio_data *drvdata = container_of(dwork, |
| 118 | struct ps2_gpio_data, |
| 119 | tx_work); |
| 120 | |
| 121 | enable_irq(drvdata->irq); |
| 122 | gpiod_direction_output(drvdata->gpio_data, 0); |
| 123 | gpiod_direction_input(drvdata->gpio_clk); |
| 124 | } |
| 125 | |
| 126 | static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) |
| 127 | { |
| 128 | unsigned char byte, cnt; |
| 129 | int data; |
| 130 | int rxflags = 0; |
| 131 | static unsigned long old_jiffies; |
| 132 | |
| 133 | byte = drvdata->rx_byte; |
| 134 | cnt = drvdata->rx_cnt; |
| 135 | |
| 136 | if (old_jiffies == 0) |
| 137 | old_jiffies = jiffies; |
| 138 | |
| 139 | if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { |
| 140 | dev_err(drvdata->dev, |
| 141 | "RX: timeout, probably we missed an interrupt\n"); |
| 142 | goto err; |
| 143 | } |
| 144 | old_jiffies = jiffies; |
| 145 | |
| 146 | data = gpiod_get_value(drvdata->gpio_data); |
| 147 | if (unlikely(data < 0)) { |
| 148 | dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n", |
| 149 | data); |
| 150 | goto err; |
| 151 | } |
| 152 | |
| 153 | switch (cnt) { |
| 154 | case PS2_START_BIT: |
| 155 | /* start bit should be low */ |
| 156 | if (unlikely(data)) { |
| 157 | dev_err(drvdata->dev, "RX: start bit should be low\n"); |
| 158 | goto err; |
| 159 | } |
| 160 | break; |
| 161 | case PS2_DATA_BIT0: |
| 162 | case PS2_DATA_BIT1: |
| 163 | case PS2_DATA_BIT2: |
| 164 | case PS2_DATA_BIT3: |
| 165 | case PS2_DATA_BIT4: |
| 166 | case PS2_DATA_BIT5: |
| 167 | case PS2_DATA_BIT6: |
| 168 | case PS2_DATA_BIT7: |
| 169 | /* processing data bits */ |
| 170 | if (data) |
| 171 | byte |= (data << (cnt - 1)); |
| 172 | break; |
| 173 | case PS2_PARITY_BIT: |
| 174 | /* check odd parity */ |
| 175 | if (!((hweight8(byte) & 1) ^ data)) { |
| 176 | rxflags |= SERIO_PARITY; |
| 177 | dev_warn(drvdata->dev, "RX: parity error\n"); |
| 178 | if (!drvdata->write_enable) |
| 179 | goto err; |
| 180 | } |
| 181 | |
| 182 | /* Do not send spurious ACK's and NACK's when write fn is |
| 183 | * not provided. |
| 184 | */ |
| 185 | if (!drvdata->write_enable) { |
| 186 | if (byte == PS2_DEV_RET_NACK) |
| 187 | goto err; |
| 188 | else if (byte == PS2_DEV_RET_ACK) |
| 189 | break; |
| 190 | } |
| 191 | |
| 192 | /* Let's send the data without waiting for the stop bit to be |
| 193 | * sent. It may happen that we miss the stop bit. When this |
| 194 | * happens we have no way to recover from this, certainly |
| 195 | * missing the parity bit would be recognized when processing |
| 196 | * the stop bit. When missing both, data is lost. |
| 197 | */ |
| 198 | serio_interrupt(drvdata->serio, byte, rxflags); |
| 199 | dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); |
| 200 | break; |
| 201 | case PS2_STOP_BIT: |
| 202 | /* stop bit should be high */ |
| 203 | if (unlikely(!data)) { |
| 204 | dev_err(drvdata->dev, "RX: stop bit should be high\n"); |
| 205 | goto err; |
| 206 | } |
| 207 | cnt = byte = 0; |
| 208 | old_jiffies = 0; |
| 209 | goto end; /* success */ |
| 210 | default: |
| 211 | dev_err(drvdata->dev, "RX: got out of sync with the device\n"); |
| 212 | goto err; |
| 213 | } |
| 214 | |
| 215 | cnt++; |
| 216 | goto end; /* success */ |
| 217 | |
| 218 | err: |
| 219 | cnt = byte = 0; |
| 220 | old_jiffies = 0; |
| 221 | __ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); |
| 222 | end: |
| 223 | drvdata->rx_cnt = cnt; |
| 224 | drvdata->rx_byte = byte; |
| 225 | return IRQ_HANDLED; |
| 226 | } |
| 227 | |
| 228 | static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) |
| 229 | { |
| 230 | unsigned char byte, cnt; |
| 231 | int data; |
| 232 | static unsigned long old_jiffies; |
| 233 | |
| 234 | cnt = drvdata->tx_cnt; |
| 235 | byte = drvdata->tx_byte; |
| 236 | |
| 237 | if (old_jiffies == 0) |
| 238 | old_jiffies = jiffies; |
| 239 | |
| 240 | if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { |
| 241 | dev_err(drvdata->dev, |
| 242 | "TX: timeout, probably we missed an interrupt\n"); |
| 243 | goto err; |
| 244 | } |
| 245 | old_jiffies = jiffies; |
| 246 | |
| 247 | switch (cnt) { |
| 248 | case PS2_START_BIT: |
| 249 | /* should never happen */ |
| 250 | dev_err(drvdata->dev, |
| 251 | "TX: start bit should have been sent already\n"); |
| 252 | goto err; |
| 253 | case PS2_DATA_BIT0: |
| 254 | case PS2_DATA_BIT1: |
| 255 | case PS2_DATA_BIT2: |
| 256 | case PS2_DATA_BIT3: |
| 257 | case PS2_DATA_BIT4: |
| 258 | case PS2_DATA_BIT5: |
| 259 | case PS2_DATA_BIT6: |
| 260 | case PS2_DATA_BIT7: |
| 261 | data = byte & BIT(cnt - 1); |
| 262 | gpiod_set_value(drvdata->gpio_data, data); |
| 263 | break; |
| 264 | case PS2_PARITY_BIT: |
| 265 | /* do odd parity */ |
| 266 | data = !(hweight8(byte) & 1); |
| 267 | gpiod_set_value(drvdata->gpio_data, data); |
| 268 | break; |
| 269 | case PS2_STOP_BIT: |
| 270 | /* release data line to generate stop bit */ |
| 271 | gpiod_direction_input(drvdata->gpio_data); |
| 272 | break; |
| 273 | case PS2_TX_TIMEOUT: |
| 274 | /* Devices generate one extra clock pulse before sending the |
| 275 | * acknowledgment. |
| 276 | */ |
| 277 | break; |
| 278 | case PS2_ACK_BIT: |
| 279 | gpiod_direction_input(drvdata->gpio_data); |
| 280 | data = gpiod_get_value(drvdata->gpio_data); |
| 281 | if (data) { |
| 282 | dev_warn(drvdata->dev, "TX: received NACK, retry\n"); |
| 283 | goto err; |
| 284 | } |
| 285 | |
| 286 | drvdata->mode = PS2_MODE_RX; |
| 287 | complete(&drvdata->tx_done); |
| 288 | |
| 289 | cnt = 1; |
| 290 | old_jiffies = 0; |
| 291 | goto end; /* success */ |
| 292 | default: |
| 293 | /* Probably we missed the stop bit. Therefore we release data |
| 294 | * line and try again. |
| 295 | */ |
| 296 | gpiod_direction_input(drvdata->gpio_data); |
| 297 | dev_err(drvdata->dev, "TX: got out of sync with the device\n"); |
| 298 | goto err; |
| 299 | } |
| 300 | |
| 301 | cnt++; |
| 302 | goto end; /* success */ |
| 303 | |
| 304 | err: |
| 305 | cnt = 1; |
| 306 | old_jiffies = 0; |
| 307 | gpiod_direction_input(drvdata->gpio_data); |
| 308 | __ps2_gpio_write(drvdata->serio, drvdata->tx_byte); |
| 309 | end: |
| 310 | drvdata->tx_cnt = cnt; |
| 311 | return IRQ_HANDLED; |
| 312 | } |
| 313 | |
| 314 | static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) |
| 315 | { |
| 316 | struct ps2_gpio_data *drvdata = dev_id; |
| 317 | |
| 318 | return drvdata->mode ? ps2_gpio_irq_tx(drvdata) : |
| 319 | ps2_gpio_irq_rx(drvdata); |
| 320 | } |
| 321 | |
| 322 | static int ps2_gpio_get_props(struct device *dev, |
| 323 | struct ps2_gpio_data *drvdata) |
| 324 | { |
| 325 | drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); |
| 326 | if (IS_ERR(drvdata->gpio_data)) { |
| 327 | dev_err(dev, "failed to request data gpio: %ld", |
| 328 | PTR_ERR(drvdata->gpio_data)); |
| 329 | return PTR_ERR(drvdata->gpio_data); |
| 330 | } |
| 331 | |
| 332 | drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); |
| 333 | if (IS_ERR(drvdata->gpio_clk)) { |
| 334 | dev_err(dev, "failed to request clock gpio: %ld", |
| 335 | PTR_ERR(drvdata->gpio_clk)); |
| 336 | return PTR_ERR(drvdata->gpio_clk); |
| 337 | } |
| 338 | |
| 339 | drvdata->write_enable = device_property_read_bool(dev, |
| 340 | "write-enable"); |
| 341 | |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | static int ps2_gpio_probe(struct platform_device *pdev) |
| 346 | { |
| 347 | struct ps2_gpio_data *drvdata; |
| 348 | struct serio *serio; |
| 349 | struct device *dev = &pdev->dev; |
| 350 | int error; |
| 351 | |
| 352 | drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL); |
| 353 | serio = kzalloc(sizeof(struct serio), GFP_KERNEL); |
| 354 | if (!drvdata || !serio) { |
| 355 | error = -ENOMEM; |
| 356 | goto err_free_serio; |
| 357 | } |
| 358 | |
| 359 | error = ps2_gpio_get_props(dev, drvdata); |
| 360 | if (error) |
| 361 | goto err_free_serio; |
| 362 | |
| 363 | if (gpiod_cansleep(drvdata->gpio_data) || |
| 364 | gpiod_cansleep(drvdata->gpio_clk)) { |
| 365 | dev_err(dev, "GPIO data or clk are connected via slow bus\n"); |
| 366 | error = -EINVAL; |
Dmitry Torokhov | 6a3eafe | 2017-10-23 16:40:42 -0700 | [diff] [blame] | 367 | goto err_free_serio; |
Danilo Krummrich | 9ee0a05 | 2017-08-28 09:59:20 -0700 | [diff] [blame] | 368 | } |
| 369 | |
| 370 | drvdata->irq = platform_get_irq(pdev, 0); |
| 371 | if (drvdata->irq < 0) { |
Danilo Krummrich | 9ee0a05 | 2017-08-28 09:59:20 -0700 | [diff] [blame] | 372 | error = drvdata->irq; |
| 373 | goto err_free_serio; |
| 374 | } |
| 375 | |
| 376 | error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, |
| 377 | IRQF_NO_THREAD, DRIVER_NAME, drvdata); |
| 378 | if (error) { |
| 379 | dev_err(dev, "failed to request irq %d: %d\n", |
| 380 | drvdata->irq, error); |
| 381 | goto err_free_serio; |
| 382 | } |
| 383 | |
| 384 | /* Keep irq disabled until serio->open is called. */ |
| 385 | disable_irq(drvdata->irq); |
| 386 | |
| 387 | serio->id.type = SERIO_8042; |
| 388 | serio->open = ps2_gpio_open; |
| 389 | serio->close = ps2_gpio_close; |
| 390 | /* Write can be enabled in platform/dt data, but possibly it will not |
| 391 | * work because of the tough timings. |
| 392 | */ |
| 393 | serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; |
| 394 | serio->port_data = drvdata; |
| 395 | serio->dev.parent = dev; |
| 396 | strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); |
| 397 | strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); |
| 398 | |
| 399 | drvdata->serio = serio; |
| 400 | drvdata->dev = dev; |
| 401 | drvdata->mode = PS2_MODE_RX; |
| 402 | |
| 403 | /* Tx count always starts at 1, as the start bit is sent implicitly by |
| 404 | * host-to-device communication initialization. |
| 405 | */ |
| 406 | drvdata->tx_cnt = 1; |
| 407 | |
| 408 | INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); |
| 409 | init_completion(&drvdata->tx_done); |
| 410 | mutex_init(&drvdata->tx_mutex); |
| 411 | |
| 412 | serio_register_port(serio); |
| 413 | platform_set_drvdata(pdev, drvdata); |
| 414 | |
| 415 | return 0; /* success */ |
| 416 | |
| 417 | err_free_serio: |
| 418 | kfree(serio); |
| 419 | return error; |
| 420 | } |
| 421 | |
| 422 | static int ps2_gpio_remove(struct platform_device *pdev) |
| 423 | { |
| 424 | struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev); |
| 425 | |
| 426 | serio_unregister_port(drvdata->serio); |
| 427 | return 0; |
| 428 | } |
| 429 | |
| 430 | #if defined(CONFIG_OF) |
| 431 | static const struct of_device_id ps2_gpio_match[] = { |
| 432 | { .compatible = "ps2-gpio", }, |
| 433 | { }, |
| 434 | }; |
| 435 | MODULE_DEVICE_TABLE(of, ps2_gpio_match); |
| 436 | #endif |
| 437 | |
| 438 | static struct platform_driver ps2_gpio_driver = { |
| 439 | .probe = ps2_gpio_probe, |
| 440 | .remove = ps2_gpio_remove, |
| 441 | .driver = { |
| 442 | .name = DRIVER_NAME, |
| 443 | .of_match_table = of_match_ptr(ps2_gpio_match), |
| 444 | }, |
| 445 | }; |
| 446 | module_platform_driver(ps2_gpio_driver); |
| 447 | |
| 448 | MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>"); |
| 449 | MODULE_DESCRIPTION("GPIO PS2 driver"); |
| 450 | MODULE_LICENSE("GPL v2"); |