| /* |
| * SDIO host client driver interface of Broadcom HNBU |
| * export functions to client drivers |
| * abstract OS and BUS specific details of SDIO |
| * |
| * Copyright (C) 2024, Broadcom. |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * |
| * <<Broadcom-WL-IPTag/Dual:>> |
| */ |
| |
| /** |
| * @file bcmsdh.h |
| */ |
| |
| #ifndef _bcmsdh_h_ |
| #define _bcmsdh_h_ |
| |
| #define BCMSDH_ERROR_VAL 0x0001 /* Error */ |
| #define BCMSDH_INFO_VAL 0x0002 /* Info */ |
| extern const uint bcmsdh_msglevel; |
| |
| #ifdef BCMDBG |
| #define BCMSDH_ERROR(x) do { if (bcmsdh_msglevel & BCMSDH_ERROR_VAL) printf x; } while (0) |
| #define BCMSDH_INFO(x) do { if (bcmsdh_msglevel & BCMSDH_INFO_VAL) printf x; } while (0) |
| #else /* BCMDBG */ |
| #define BCMSDH_ERROR(x) |
| #define BCMSDH_INFO(x) |
| #endif /* BCMDBG */ |
| |
| #if defined(BCMSDIO) && (defined(BCMSDIOH_STD) || defined(BCMSDIOH_BCM) || defined(BCMSDIOH_SPI)) |
| #define BCMSDH_ADAPTER |
| #endif /* BCMSDIO && (BCMSDIOH_STD || BCMSDIOH_BCM || BCMSDIOH_SPI) */ |
| |
| /* forward declarations */ |
| typedef struct bcmsdh_info bcmsdh_info_t; |
| typedef void (*bcmsdh_cb_fn_t)(void *); |
| |
| #if defined(NDIS) && (NDISVER >= 0x0630) && defined(BCMDONGLEHOST) |
| extern bcmsdh_info_t *bcmsdh_attach(osl_t *osh, void *cfghdl, |
| void **regsva, uint irq, shared_info_t *sh); |
| #else |
| |
| #if defined(BT_OVER_SDIO) |
| typedef enum { |
| NO_HANG_STATE = 0, |
| HANG_START_STATE = 1, |
| HANG_RECOVERY_STATE = 2 |
| } dhd_hang_state_t; |
| #endif |
| |
| extern bcmsdh_info_t *bcmsdh_attach(osl_t *osh, void *sdioh, ulong *regsva); |
| /** |
| * BCMSDH API context |
| */ |
| struct bcmsdh_info |
| { |
| bool init_success; /* underlying driver successfully attached */ |
| void *sdioh; /* handler for sdioh */ |
| uint32 vendevid; /* Target Vendor and Device ID on SD bus */ |
| osl_t *osh; |
| bool regfail; /* Save status of last reg_read/reg_write call */ |
| uint32 sbwad; /* Save backplane window address */ |
| void *os_cxt; /* Pointer to per-OS private data */ |
| bool force_sbwad_calc; /* forces calculation of sbwad instead of using cached value */ |
| }; |
| #endif /* defined(NDIS) && (NDISVER >= 0x0630) && defined(BCMDONGLEHOST) */ |
| |
| /* Detach - freeup resources allocated in attach */ |
| extern int bcmsdh_detach(osl_t *osh, void *sdh); |
| |
| /* Query if SD device interrupts are enabled */ |
| extern bool bcmsdh_intr_query(void *sdh); |
| |
| /* Enable/disable SD interrupt */ |
| extern int bcmsdh_intr_enable(void *sdh); |
| extern int bcmsdh_intr_disable(void *sdh); |
| |
| /* Register/deregister device interrupt handler. */ |
| extern int bcmsdh_intr_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh); |
| extern int bcmsdh_intr_dereg(void *sdh); |
| /* Enable/disable SD card interrupt forward */ |
| extern void bcmsdh_intr_forward(void *sdh, bool pass); |
| |
| #if defined(DHD_DEBUG) || defined(BCMDBG) |
| /* Query pending interrupt status from the host controller */ |
| extern bool bcmsdh_intr_pending(void *sdh); |
| #endif |
| |
| /* Register a callback to be called if and when bcmsdh detects |
| * device removal. No-op in the case of non-removable/hardwired devices. |
| */ |
| extern int bcmsdh_devremove_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh); |
| |
| /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface). |
| * fn: function number |
| * addr: unmodified SDIO-space address |
| * data: data byte to write |
| * err: pointer to error code (or NULL) |
| */ |
| extern uint8 bcmsdh_cfg_read(void *sdh, uint func, uint32 addr, int *err); |
| extern void bcmsdh_cfg_write(void *sdh, uint func, uint32 addr, uint8 data, int *err); |
| |
| /* Read/Write 4bytes from/to cfg space */ |
| extern uint32 bcmsdh_cfg_read_word(void *sdh, uint fnc_num, uint32 addr, int *err); |
| extern void bcmsdh_cfg_write_word(void *sdh, uint fnc_num, uint32 addr, uint32 data, int *err); |
| |
| /* Read CIS content for specified function. |
| * fn: function whose CIS is being requested (0 is common CIS) |
| * cis: pointer to memory location to place results |
| * length: number of bytes to read |
| * Internally, this routine uses the values from the cis base regs (0x9-0xB) |
| * to form an SDIO-space address to read the data from. |
| */ |
| extern int bcmsdh_cis_read(void *sdh, uint func, uint8 *cis, uint length); |
| |
| /* Synchronous access to device (client) core registers via CMD53 to F1. |
| * addr: backplane address (i.e. >= regsva from attach) |
| * size: register width in bytes (2 or 4) |
| * data: data for register write |
| */ |
| extern uint32 bcmsdh_reg_read(void *sdh, uintptr addr, uint size); |
| extern uint32 bcmsdh_reg_write(void *sdh, uintptr addr, uint size, uint32 data); |
| |
| /* set sb address window */ |
| extern int bcmsdhsdio_set_sbaddr_window(void *sdh, uint32 address, bool force_set); |
| |
| /* Indicate if last reg read/write failed */ |
| /* Replace this with status pointers in reg_read/write */ |
| extern bool bcmsdh_regfail(void *sdh); |
| |
| /* Buffer transfer to/from device (client) core via cmd53. |
| * fn: function number |
| * addr: backplane address (i.e. >= regsva from attach) |
| * flags: backplane width, address increment, sync/async |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * pkt: pointer to packet associated with buf (if any) |
| * complete: callback function for command completion (async only) |
| * handle: handle for completion callback (first arg in callback) |
| * Returns 0 or error code. |
| * NOTE: Async operation is not currently supported. |
| */ |
| |
| typedef void (*bcmsdh_cmplt_fn_t)(void *handle, int status, bool sync_waiting); |
| extern int bcmsdh_send_buf(void *sdh, uint32 addr, uint fn, uint flags, |
| uint8 *buf, uint nbytes, void *pkt, |
| bcmsdh_cmplt_fn_t complete_fn, void *handle); |
| extern int bcmsdh_recv_buf(void *sdh, uint32 addr, uint fn, uint flags, |
| uint8 *buf, uint nbytes, void *pkt, |
| bcmsdh_cmplt_fn_t complete_fn, void *handle); |
| |
| extern void bcmsdh_glom_post(void *sdh, uint8 *frame, void *pkt, uint len); |
| extern void bcmsdh_glom_clear(void *sdh); |
| extern uint bcmsdh_set_mode(void *sdh, uint mode); |
| extern bool bcmsdh_glom_enabled(void); |
| /* Flags bits */ |
| #define SDIO_REQ_4BYTE 0x1 /* Four-byte target (backplane) width (vs. two-byte) */ |
| #define SDIO_REQ_FIXED 0x2 /* Fixed address (FIFO) (vs. incrementing address) */ |
| #define SDIO_REQ_ASYNC 0x4 /* Async request (vs. sync request) */ |
| #define SDIO_BYTE_MODE 0x8 /* Byte mode request(non-block mode) */ |
| |
| /* Pending (non-error) return code */ |
| #define BCME_PENDING 1 |
| |
| /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). |
| * rw: read or write (0/1) |
| * addr: direct SDIO address |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * Returns 0 or error code. |
| */ |
| extern int bcmsdh_rwdata(void *sdh, uint rw, uint32 addr, uint8 *buf, uint nbytes); |
| |
| /* Issue an abort to the specified function */ |
| extern int bcmsdh_abort(void *sdh, uint fn); |
| |
| /* Start SDIO Host Controller communication */ |
| extern int bcmsdh_start(void *sdh, int stage); |
| |
| /* Stop SDIO Host Controller communication */ |
| extern int bcmsdh_stop(void *sdh); |
| |
| /* Wait system lock free */ |
| extern int bcmsdh_waitlockfree(void *sdh); |
| |
| /* Bogosity alert. This should only know about devids gleaned through |
| * the standard CIS (versus some client dependent method), and we already |
| * have an interface for the CIS. |
| * Remove me. |
| */ |
| /* Returns the "Device ID" of target device on the SDIO bus. */ |
| extern int bcmsdh_query_device(void *sdh); |
| |
| /* Returns the number of IO functions reported by the device */ |
| extern uint bcmsdh_query_iofnum(void *sdh); |
| |
| /* Miscellaneous knob tweaker. */ |
| extern int bcmsdh_iovar_op(void *sdh, const char *name, |
| void *params, uint plen, void *arg, uint len, bool set); |
| |
| /* Reset and reinitialize the device */ |
| extern int bcmsdh_reset(bcmsdh_info_t *sdh); |
| |
| /* helper functions */ |
| |
| /* callback functions */ |
| typedef struct { |
| /* probe the device */ |
| void *(*probe)(uint16 vend_id, uint16 dev_id, uint16 bus, uint16 slot, |
| uint16 func, uint bustype, void * regsva, osl_t * osh, |
| void * param); |
| /* remove the device */ |
| void (*remove)(void *context); |
| /* can we suspend now */ |
| int (*suspend)(void *context); |
| /* resume from suspend */ |
| int (*resume)(void *context); |
| } bcmsdh_driver_t; |
| |
| /* platform specific/high level functions */ |
| extern int bcmsdh_register(bcmsdh_driver_t *driver); |
| extern void bcmsdh_unregister(void); |
| extern bool bcmsdh_chipmatch(uint16 vendor, uint16 device); |
| extern void bcmsdh_device_remove(void * sdh); |
| |
| extern int bcmsdh_reg_sdio_notify(void* semaphore); |
| extern void bcmsdh_unreg_sdio_notify(void); |
| |
| #if defined(OOB_INTR_ONLY) || defined(BCMSPI_ANDROID) |
| extern int bcmsdh_oob_intr_register(bcmsdh_info_t *bcmsdh, bcmsdh_cb_fn_t oob_irq_handler, |
| void* oob_irq_handler_context); |
| extern void bcmsdh_oob_intr_unregister(bcmsdh_info_t *sdh); |
| extern void bcmsdh_oob_intr_set(bcmsdh_info_t *sdh, bool enable); |
| extern int bcmsdh_get_oob_intr_num(bcmsdh_info_t *bcmsdh); |
| #endif /* defined(OOB_INTR_ONLY) || defined(BCMSPI_ANDROID) */ |
| extern void *bcmsdh_get_dev(bcmsdh_info_t *sdh); |
| extern void bcmsdh_dev_pm_stay_awake(bcmsdh_info_t *sdh); |
| extern void bcmsdh_dev_relax(bcmsdh_info_t *sdh); |
| extern bool bcmsdh_dev_pm_enabled(bcmsdh_info_t *sdh); |
| |
| int bcmsdh_suspend(bcmsdh_info_t *bcmsdh); |
| int bcmsdh_resume(bcmsdh_info_t *bcmsdh); |
| |
| /* Function to pass device-status bits to DHD. */ |
| extern uint32 bcmsdh_get_dstatus(void *sdh); |
| |
| /* Function to return current window addr */ |
| extern uint32 bcmsdh_cur_sbwad(void *sdh); |
| |
| /* function to force sbwad calculation instead of using cached value */ |
| extern void bcmsdh_force_sbwad_calc(void *sdh, bool force); |
| |
| /* Function to pass chipid and rev to lower layers for controlling pr's */ |
| extern void bcmsdh_chipinfo(void *sdh, uint32 chip, uint32 chiprev); |
| |
| #ifdef BCMSPI |
| extern void bcmsdh_dwordmode(void *sdh, bool set); |
| #endif /* BCMSPI */ |
| |
| extern int bcmsdh_sleep(void *sdh, bool enab); |
| |
| /* GPIO support */ |
| extern int bcmsdh_gpio_init(void *sd); |
| extern bool bcmsdh_gpioin(void *sd, uint32 gpio); |
| extern int bcmsdh_gpioouten(void *sd, uint32 gpio); |
| extern int bcmsdh_gpioout(void *sd, uint32 gpio, bool enab); |
| |
| #endif /* _bcmsdh_h_ */ |