Google Git
Sign in
android / kernel / google-modules / wlan / bcmdhd / bcm4390 / refs/heads/android-gs-caimito-6.1-android15-dp / . / include / wlioctl_defs.h
blob: 13867b8bcba7c08edcd9c541d3ddf9590b911d95 [file] [log] [blame] [edit]
/*
* Custom OID/ioctl definitions for
* Broadcom 802.11abg Networking Device Driver
*
* Definitions subject to change without notice.
*
* Copyright (C) 2024, Broadcom.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
*
* <<Broadcom-WL-IPTag/Dual:>>
*/
#ifndef wlioctl_defs_h
#define wlioctl_defs_h
#ifdef EFI
/*
* This is the Broadcom-specific guid selector for IOCTL handler in the 80211 Protocol
* define for EFI. However, we use last 4 nibbles to communicate 'cmd' from tool to
* driver.
*/
#define BCMWL_IOCTL_GUID \
{0xB4910A35, 0x88C5, 0x4328, { 0x90, 0x08, 0x9F, 0xB2, 0x00, 0x00, 0x0, 0x0 } }
#endif /* EFI */
/* All builds use the new 11ac ratespec/chanspec */
#undef D11AC_IOTYPES
#define D11AC_IOTYPES
#ifdef USE_LEGACY_RSPEC_DEFS
typedef uint32 ratespec_t;
/* Remove when no referencing branches exist.
* These macros will be used only in older branches (prior to K branch).
* Wl layer in newer branches and trunk use those defined in bcmwifi_rspec.h.
* Non-wl layer in newer branches and trunk may use these as well
* until they are removed.
*/
/* WL_RSPEC defines for rate information */
#define WL_RSPEC_RATE_MASK 0x000000FF /* rate or HT MCS value */
#define WL_RSPEC_VHT_MCS_MASK 0x0000000F /* VHT MCS value */
#define WL_RSPEC_VHT_NSS_MASK 0x000000F0 /* VHT Nss value */
#define WL_RSPEC_VHT_NSS_SHIFT 4 /* VHT Nss value shift */
#define WL_RSPEC_TXEXP_MASK 0x00000300
#define WL_RSPEC_TXEXP_SHIFT 8
#define WL_RSPEC_BW_MASK 0x00070000 /* bandwidth mask */
#define WL_RSPEC_BW_SHIFT 16 /* bandwidth shift */
#define WL_RSPEC_STBC 0x00100000 /* STBC encoding, Nsts = 2 x Nss */
#define WL_RSPEC_TXBF 0x00200000 /* bit indicates TXBF mode */
#define WL_RSPEC_LDPC 0x00400000 /* bit indicates adv coding in use */
#define WL_RSPEC_SGI 0x00800000 /* Short GI mode */
#define WL_RSPEC_ENCODING_MASK 0x03000000 /* Encoding of Rate/MCS field */
#define WL_RSPEC_OVERRIDE_RATE 0x40000000 /* bit indicate to override mcs only */
#define WL_RSPEC_OVERRIDE_MODE 0x80000000 /* bit indicates override rate & mode */
/* WL_RSPEC_ENCODING field defs */
#define WL_RSPEC_ENCODE_RATE 0x00000000 /* Legacy rate is stored in RSPEC_RATE_MASK */
#define WL_RSPEC_ENCODE_HT 0x01000000 /* HT MCS is stored in RSPEC_RATE_MASK */
#define WL_RSPEC_ENCODE_VHT 0x02000000 /* VHT MCS and Nss is stored in RSPEC_RATE_MASK */
/* WL_RSPEC_BW field defs */
#define WL_RSPEC_BW_UNSPECIFIED 0
#define WL_RSPEC_BW_20MHZ 0x00010000
#define WL_RSPEC_BW_40MHZ 0x00020000
#define WL_RSPEC_BW_80MHZ 0x00030000
#define WL_RSPEC_BW_160MHZ 0x00040000
#define WL_RSPEC_BW_10MHZ 0x00050000
#define WL_RSPEC_BW_5MHZ 0x00060000
#define WL_RSPEC_BW_2P5MHZ 0x00070000
#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */
#ifndef OEM_ANDROID
/* 'proprietary' string should not exist in open source(OEM_ANDROID) */
/* given a proprietary MCS, get number of spatial streams */
#define GET_PROPRIETARY_11N_MCS_NSS(mcs) (1 + ((mcs) - 85) / 8)
#define GET_11N_MCS_NSS(mcs) ((mcs) < 32 ? (1 + ((mcs) / 8)) \
: ((mcs) == 32 ? 1 : GET_PROPRIETARY_11N_MCS_NSS(mcs)))
#endif /* !OEM_ANDROID */
#endif /* USE_LEGACY_RSPEC_DEFS */
/* Legacy defines for the nrate iovar */
#define OLD_NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
#define OLD_NRATE_RATE_MASK 0x0000007f /* rate/mcs value */
#define OLD_NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
#define OLD_NRATE_STF_SHIFT 8 /* stf mode shift */
#define OLD_NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */
#define OLD_NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */
#define OLD_NRATE_SGI 0x00800000 /* sgi mode */
#define OLD_NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */
#define OLD_NRATE_STF_SISO 0 /* stf mode SISO */
#define OLD_NRATE_STF_CDD 1 /* stf mode CDD */
#define OLD_NRATE_STF_STBC 2 /* stf mode STBC */
#define OLD_NRATE_STF_SDM 3 /* stf mode SDM */
#define WLC_11N_N_PROP_MCS 6 /* number of proprietary 11n MCS'es */
#define WLC_11N_FIRST_PROP_MCS 87 /* first Broadcom proprietary MCS */
#define WLC_11N_LAST_PROP_MCS 102
#define MAX_CCA_SECS 1 /* CCA keeps this many seconds history - trimmed for dongle */
#define IBSS_MED 15 /* Mediom in-bss congestion percentage */
#define IBSS_HI 25 /* Hi in-bss congestion percentage */
#define OBSS_MED 12
#define OBSS_HI 25
#define INTERFER_MED 5
#define INTERFER_HI 10
#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */
#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
#define CCA_FLAGS_PREFER_1_6_11 0x10
#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exclude channel based on interfer level */
#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */
#define WL_STA_AID(a) ((a) &~ 0xc000)
/* Flags for sta_info_t indicating properties of STA */
#define WL_STA_BRCM 0x00000001 /* Running a Broadcom driver */
#define WL_STA_WME 0x00000002 /* WMM association */
#define WL_STA_NONERP 0x00000004 /* No ERP */
#define WL_STA_AUTHE 0x00000008 /* Authenticated */
#define WL_STA_ASSOC 0x00000010 /* Associated */
#define WL_STA_AUTHO 0x00000020 /* Authorized */
#define WL_STA_WDS 0x00000040 /* Wireless Distribution System */
#define WL_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */
#define WL_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */
#define WL_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */
#define WL_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */
#define WL_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */
#define WL_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */
#define WL_STA_N_CAP 0x00002000 /* STA 802.11n capable */
#define WL_STA_SCBSTATS 0x00004000 /* Per STA debug stats */
#define WL_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */
#define WL_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */
#define WL_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */
#define WL_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */
#define WL_STA_RIFS_CAP 0x00080000 /* rifs enabled */
#define WL_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */
#define WL_STA_WPS 0x00200000 /* WPS state */
#define WL_STA_DWDS_CAP 0x01000000 /* DWDS CAP */
#define WL_STA_DWDS 0x02000000 /* DWDS active */
#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */
#define WL_STA_IS_2G 0x04000000 /* 2G channels supported */
#define WL_STA_IS_5G 0x08000000 /* 5G channels supported */
#define WL_STA_IS_6G 0x10000000 /* 6G channels supported */
/* STA HT cap fields */
#define WL_STA_CAP_LDPC_CODING 0x0001 /* Support for rx of LDPC coded pkts */
#define WL_STA_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE:20/40MHZ supported */
#define WL_STA_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */
#define WL_STA_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */
#define WL_STA_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */
#define WL_STA_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */
#define WL_STA_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */
#define WL_STA_CAP_GF 0x0010 /* Greenfield preamble support */
#define WL_STA_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */
#define WL_STA_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */
#define WL_STA_CAP_TX_STBC 0x0080 /* Tx STBC support */
#define WL_STA_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */
#define WL_STA_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */
#define WL_STA_CAP_DELAYED_BA 0x0400 /* delayed BA support */
#define WL_STA_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */
#define WL_STA_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */
#define WL_STA_CAP_PSMP 0x2000 /* Power Save Multi Poll support */
#define WL_STA_CAP_40MHZ_INTOLERANT 0x4000 /* 40MHz Intolerant */
#define WL_STA_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */
#define WL_STA_CAP_RX_STBC_NO 0x0 /* no rx STBC support */
#define WL_STA_CAP_RX_STBC_ONE_STREAM 0x1 /* rx STBC support of 1 spatial stream */
#define WL_STA_CAP_RX_STBC_TWO_STREAM 0x2 /* rx STBC support of 1-2 spatial streams */
#define WL_STA_CAP_RX_STBC_THREE_STREAM 0x3 /* rx STBC support of 1-3 spatial streams */
/* scb vht flags */
#define WL_STA_VHT_LDPCCAP 0x0001
#define WL_STA_SGI80 0x0002
#define WL_STA_SGI160 0x0004
#define WL_STA_VHT_TX_STBCCAP 0x0008
#define WL_STA_VHT_RX_STBCCAP 0x0010
#define WL_STA_SU_BEAMFORMER 0x0020
#define WL_STA_SU_BEAMFORMEE 0x0040
#define WL_STA_MU_BEAMFORMER 0x0080
#define WL_STA_MU_BEAMFORMEE 0x0100
#define WL_STA_VHT_TXOP_PS 0x0200
#define WL_STA_HTC_VHT_CAP 0x0400
/* Values for TX Filter override mode */
#define WLC_TXFILTER_OVERRIDE_DISABLED 0
#define WLC_TXFILTER_OVERRIDE_ENABLED 1
#define WL_IOCTL_ACTION_GET 0x0
#define WL_IOCTL_ACTION_SET 0x1
#define WL_IOCTL_ACTION_OVL_IDX_MASK 0x1e
#define WL_IOCTL_ACTION_OVL_RSV 0x20
#define WL_IOCTL_ACTION_OVL 0x40
#define WL_IOCTL_ACTION_MASK 0x7e
#define WL_IOCTL_ACTION_OVL_SHIFT 1
/* For WLC_SET_INFRA ioctl & infra_configuration iovar SET/GET operations */
#define WL_BSSTYPE_INDEP 0
#define WL_BSSTYPE_INFRA 1
#define WL_BSSTYPE_ANY 2 /* deprecated */
#define WL_BSSTYPE_MESH 3
/* Bit definitions of mws_active_scan_throttle iovar */
#define WL_SCAN_THROTTLE_MASK 0xF
#define WL_SCAN_THROTTLE_ASSOCSCAN (1U << 0)
#define WL_SCAN_THROTTLE_ROAMSCAN (1U << 1)
#define WL_SCAN_THROTTLE_OTHER_FW_SCAN (1U << 2) /* for other scans like pno etc */
#define WL_SCAN_THROTTLE_HOSTSCAN (1U << 3)
/* Mask bit for LOW power scan, High accuracy scan, LOW span scan bit defines */
#define WL_SCANFLAGS_SCAN_MODE_MASK 0x7000u
#define WL_SCANFLAGS_SCAN_MODE_SHIFT 12u
/* Bitmask for scan_type */
/* Reserved flag precludes the use of 0xff for scan_type which is
* interpreted as default for backward compatibility.
* Low priority scan uses currently reserved bit,
* this should be changed as scan_type extended.
* So, reserved flag definition removed.
*/
/* Use lower 16 bit for scan flags, the upper 16 bits are for internal use */
#define WL_SCANFLAGS_PASSIVE 0x01U /* force passive scan */
#define WL_SCANFLAGS_LOW_PRIO 0x02U /* Low priority scan */
#define WL_SCANFLAGS_PROHIBITED 0x04U /* allow scanning prohibited channels */
#define WL_SCANFLAGS_OFFCHAN 0x08U /* allow scanning/reporting off-channel
* APs.
*/
#define WL_SCANFLAGS_HOTSPOT 0x10U /* automatic ANQP to hotspot APs */
#define WL_SCANFLAGS_SWTCHAN 0x20U /* Force channel switch for differerent
* bandwidth.
*/
#define WL_SCANFLAGS_FORCE_PARALLEL 0x40U /* Force parallel scan even when actcb_fn_t
* is on.By default parallel scan will be
* disabled if actcb_fn_t is provided.
*/
#define WL_SCANFLAGS_SISO 0x40U /* Use 1 RX chain for scanning */
#define WL_SCANFLAGS_MIMO 0x80U /* Force MIMO scanning */
#define WL_SCANFLAGS_NO_6GHZ_FOLLOWUP 0x100U /* No 6G active scan due to RNR or FILS */
#define WL_SCANFLAGS_INCL_FILS_DISC_FRAMES 0x200U /* Include Fils info as well in
* escan results.
*/
#define WL_SCANFLAGS_FORCE_SCAN_CORE_6G_SCAN 0x400U /* Force 6G scan on Scan core. */
#define WL_SCANFLAGS_INCL_ORIG_RNR 0x800U /* Include scan results with
* matching RNR BSS
*/
/* This is to re purpose the definition to firmware internal use.
* By repurposing these bit values can be used for host.
* These are moved to higher bits and defined in firmware.
*/
#ifndef WL_SCANFLAGS_INT_SCANTYPE_HAS_ALIAS
/* Mask bit for Assoc scan, Roam scan, Other FW scan, Host scan bit defines */
#define WL_SCANFLAGS_CLIENT_MASK 0xF00u
#define WL_SCANFLAGS_CLIENT_SHIFT 8
#define WL_SCANFLAGS_ASSOCSCAN 0x100U /* Assoc scan */
#define WL_SCANFLAGS_ROAMSCAN 0x200U /* Roam scan */
#define WL_SCANFLAGS_FWSCAN 0x400U /* Other FW scan */
#define WL_SCANFLAGS_HOSTSCAN 0x800U /* Host scan */
#endif /* WL_SCANFLAGS_INT_SCANTYPE_HAS_ALIAS */
#define WL_SCANFLAGS_LOW_POWER_SCAN 0x1000U /* LOW power scan, scheduled scan
* only on scancore
*/
#define WL_SCANFLAGS_HIGH_ACCURACY 0x2000U /* High accuracy scan, which needs
* reliable scan results
*/
#define WL_SCANFLAGS_LOW_SPAN 0x4000U /* LOW span scan, which expects
* scan to be completed ASAP
*/
#define WL_SCANFLAGS_LISTEN 0x8000U /* Listen option in escan
* enable LISTEN along with PASSIVE flag
*/
/* Use lower 16 bit for scan flags, the upper 16 bits are for internal use */
/* WL_SCANFLAGS_EXT_ flags */
#define WL_SCANFLAGS_EXT_LOWPOWER_PARALLEL_2G_SCAN 0x1U /* Lowpower parallel 2G scan */
#define WL_SCANFLAGS_EXT_NOMLOFOLLOWUP 0x2U /* No 2G or 5G band active
* scan due to RNR
*/
/* BIT MASK for 6G_SCAN_TYPE */
#define WL_SCAN_SSIDFLAGS_SHORT_SSID 0x01U /* include short ssid */
#define WL_SCAN_INC_RNR 0x02U /* Include RNR channels for scan */
#define WL_SCAN_SKIP_FILS_DISCOVERY_PERIOD 0x04U /* Skip FILS Discovery Period for 6G chans */
#define WL_SCAN_ACTIVE_6GHZ 0x08U /* Force active scan for 6GHZ channel */
#define WL_SCAN_LPSC_DISABLE_2G 0x10U /* Disable 2G scan on scan core */
#define WL_SCAN_LPSC_DISABLE_5G_6G 0x20U /* Disable 5G scan on scan core */
#define WL_SCAN_LPSC_AVOID_TRUE_SLICE 0x40U /* Avoid scans on true slice when set */
/* Value to decide scan type based on scqs */
#define WL_SC_RETRY_SCAN_MODE_NO_SCAN 0x0u /* Do not reschedule scan */
#define WL_SC_RETRY_SCAN_MODE_HIGH_ACC 0x1u /* Reschedule scan as HighAccuracy */
#define WL_SC_RETRY_SCAN_MODE_LOWPOWER 0x2u /* Reschedule scan as LOWPOWER */
#define WL_SC_RETRY_SCAN_MODE_AUTO 0x3u /* Scan rescheduling type is decided
* dynamically.
*/
/* wl_iscan_results status values */
#define WL_SCAN_RESULTS_SUCCESS 0
#define WL_SCAN_RESULTS_PARTIAL 1
#define WL_SCAN_RESULTS_PENDING 2
#define WL_SCAN_RESULTS_ABORTED 3
#define WL_SCAN_RESULTS_NO_MEM 4
/* Flags for parallel scan */
/* Bitmap to enable/disable rsdb parallel scan, 5g-5g/2g-2g parallel scan
* SCAN_PARALLEL_PASSIVE_5G ==> 5g-5g parallel scan
* SCAN_PARALLEL_PASSIVE_2G ==> 2g-2g parallel scan
*/
#define SCAN_PARALLEL_PASSIVE_5G (0x40)
#define SCAN_PARALLEL_PASSIVE_2G (0x80)
#define SCANOL_ENABLED (1 << 0)
#define SCANOL_BCAST_SSID (1 << 1)
#define SCANOL_NOTIFY_BCAST_SSID (1 << 2)
#define SCANOL_RESULTS_PER_CYCLE (1 << 3)
/* scan times in milliseconds */
#define SCANOL_HOME_TIME 45 /* for home channel processing */
#define SCANOL_ASSOC_TIME 20 /* dwell on a channel while associated */
#define SCANOL_UNASSOC_TIME 40 /* dwell on a channel while unassociated */
#define SCANOL_PASSIVE_TIME 110 /* listen on a channelfor passive scan */
#define SCANOL_AWAY_LIMIT 100 /* max time to be away from home channel */
#define SCANOL_IDLE_REST_TIME 40
#define SCANOL_IDLE_REST_MULTIPLIER 0
#define SCANOL_ACTIVE_REST_TIME 20
#define SCANOL_ACTIVE_REST_MULTIPLIER 0
#define SCANOL_CYCLE_IDLE_REST_TIME 300000 /* Idle Rest Time between Scan Cycle (msec) */
#define SCANOL_CYCLE_IDLE_REST_MULTIPLIER 0 /* Idle Rest Time Multiplier */
#define SCANOL_CYCLE_ACTIVE_REST_TIME 200
#define SCANOL_CYCLE_ACTIVE_REST_MULTIPLIER 0
#define SCANOL_MAX_REST_TIME 3600000 /* max rest time between scan cycle (msec) */
#define SCANOL_CYCLE_DEFAULT 0 /* default for Max Scan Cycle, 0 = forever */
#define SCANOL_CYCLE_MAX 864000 /* Max Scan Cycle */
/* 10 sec/scan cycle => 100 days */
#define SCANOL_NPROBES 2 /* for Active scan; send n probes on each channel */
#define SCANOL_NPROBES_MAX 5 /* for Active scan; send n probes on each channel */
#define SCANOL_SCAN_START_DLY 10 /* delay start of offload scan (sec) */
#define SCANOL_SCAN_START_DLY_MAX 240 /* delay start of offload scan (sec) */
#define SCANOL_MULTIPLIER_MAX 10 /* Max Multiplier */
#define SCANOL_UNASSOC_TIME_MAX 100 /* max dwell on a channel while unassociated */
#define SCANOL_PASSIVE_TIME_MAX 500 /* max listen on a channel for passive scan */
#define SCANOL_SSID_MAX 16 /* max supported preferred SSID */
/* masks for channel and ssid count */
#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define WL_SCAN_PARAMS_NSSID_SHIFT 16
#define WL_SCAN_ACTION_START 1
#define WL_SCAN_ACTION_CONTINUE 2
#define WL_SCAN_ACTION_ABORT 3
#if defined(SIMPLE_ISCAN)
#define ISCAN_RETRY_CNT 5
#define ISCAN_STATE_IDLE 0
#define ISCAN_STATE_SCANING 1
#define ISCAN_STATE_PENDING 2
#endif /* SIMPLE_ISCAN */
#define ANTENNA_NUM_1 1 /* total number of antennas to be used */
#define ANTENNA_NUM_2 2
#define ANTENNA_NUM_3 3
#define ANTENNA_NUM_4 4
#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */
#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */
#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */
#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */
#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */
#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */
/* interference source detection and identification mode */
#define ITFR_MODE_DISABLE 0 /* disable feature */
#define ITFR_MODE_MANUAL_ENABLE 1 /* enable manual detection */
#define ITFR_MODE_AUTO_ENABLE 2 /* enable auto detection */
/* bit definitions for flags in interference source report */
#define ITFR_INTERFERENCED 1 /* interference detected */
#define ITFR_HOME_CHANNEL 2 /* home channel has interference */
#define ITFR_NOISY_ENVIRONMENT 4 /* noisy environemnt so feature stopped */
#define WL_NUM_RPI_BINS 8
#define WL_RM_TYPE_BASIC 1
#define WL_RM_TYPE_CCA 2
#define WL_RM_TYPE_RPI 3
#define WL_RM_TYPE_ABORT -1 /* ABORT any in-progress RM request */
#define WL_RM_FLAG_PARALLEL (1<<0)
#define WL_RM_FLAG_LATE (1<<1)
#define WL_RM_FLAG_INCAPABLE (1<<2)
#define WL_RM_FLAG_REFUSED (1<<3)
/* flags */
#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
#define WLC_CIS_DEFAULT 0 /* built-in default */
#define WLC_CIS_SROM 1 /* source is sprom */
#define WLC_CIS_OTP 2 /* source is otp */
/* PCL - Power Control Loop */
/* current gain setting is replaced by user input */
#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */
#define WL_ATTEN_PCL_ON 1 /* turn on PCL */
/* current gain setting is maintained */
#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */
/* defines used by poweridx iovar - it controls power in a-band */
/* current gain setting is maintained */
#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */
#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */
#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */
#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */
/* value >= 0 causes
* - input to be set to that value
* - PCL to be off
*/
#define BCM_MAC_STATUS_INDICATION (0x40010200L)
/* Values for TX Filter override mode */
#define WLC_TXFILTER_OVERRIDE_DISABLED 0
#define WLC_TXFILTER_OVERRIDE_ENABLED 1
/* magic pattern used for mismatch driver and wl */
#define WL_TXFIFO_SZ_MAGIC 0xa5a5
/* check this magic number */
#define WLC_IOCTL_MAGIC 0x14e46c77
/* bss_info_cap_t flags */
#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */
#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */
#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info received on channel (vs offchannel) */
#define WL_BSS_FLAGS_HS20 0x08 /* hotspot 2.0 capable */
#define WL_BSS_FLAGS_RSSI_INVALID 0x10 /* BSS contains invalid RSSI */
#define WL_BSS_FLAGS_RSSI_INACCURATE 0x20 /* BSS contains inaccurate RSSI */
#define WL_BSS_FLAGS_SNR_INVALID 0x40 /* BSS contains invalid SNR */
#define WL_BSS_FLAGS_NF_INVALID 0x80 /* BSS contains invalid noise floor */
/* bss_info_cap_t flags_2 */
#define WL_BSS_FLAGS_THRU_LPSC 0x01 /* bss_info obtained thru' LPSC */
#define WL_BSS_FLAGS_QBSS_LOAD 0x02 /* QBSS load value present */
#define WL_BSS2_FLAGS_FROM_FILS 0x04 /* values are based on FILS frame */
#define WL_BSS2_FLAGS_SHORT_SSID 0x08 /* values ssid is indicating as short ssid */
#define WL_BSS2_FLAGS_RNR_MATCH 0x10 /* To report original BSS that has RNR match */
#define WL_BSS2_FLAGS_HE_BCN_PRBRSP 0x20 /* BSS update to indiacte HE bcn or prb rsp. */
#define WL_BSS2_FLAGS_HE_6G_DUP 0x40 /* non-HT dup'ed beacon indicator */
#define WL_BSS2_FLAGS_FROM_SS 0x80 /* bss_info from results on slim scan */
/* bit definitions for bcnflags in wl_bss_info */
#define WL_BSS_BCNFLAGS_INTERWORK_PRESENT 0x01 /* beacon had IE, accessnet valid */
#define WL_BSS_BCNFLAGS_INTERWORK_PRESENT_VALID 0x02 /* on indicates support for this API */
#define WL_BSS_BCNFLAGS_MULTIPLE_BSSID_SET 0x4 /* this AP belongs to a multiple BSSID set */
#define WL_BSS_BCNFLAGS_NONTRANSMITTED_BSSID 0x8 /* this AP is the transmitted BSSID */
/* bssinfo flag for nbss_cap */
#define VHT_BI_SGI_80MHZ 0x00000100
#define VHT_BI_80MHZ 0x00000200
#define VHT_BI_160MHZ 0x00000400
#define VHT_BI_8080MHZ 0x00000800
/* reference to wl_ioctl_t struct used by usermode driver */
#define ioctl_subtype set /* subtype param */
#define ioctl_pid used /* pid param */
#define ioctl_status needed /* status param */
/* Enumerate crypto algorithms */
#define CRYPTO_ALGO_OFF 0
#define CRYPTO_ALGO_WEP1 1
#define CRYPTO_ALGO_TKIP 2
#define CRYPTO_ALGO_WEP128 3
#define CRYPTO_ALGO_AES_CCM 4
#define CRYPTO_ALGO_AES_OCB_MSDU 5
#define CRYPTO_ALGO_AES_OCB_MPDU 6
#if !defined(BCMCCX) && !defined(BCMEXTCCX)
#define CRYPTO_ALGO_NALG 7
#else
#define CRYPTO_ALGO_CKIP 7
#define CRYPTO_ALGO_CKIP_MMH 8
#define CRYPTO_ALGO_WEP_MMH 9
#define CRYPTO_ALGO_NALG 10
#endif /* !BCMCCX && !BCMEXTCCX */
#define CRYPTO_ALGO_SMS4 11
#define CRYPTO_ALGO_PMK 12 /* for 802.1x supp to set PMK before 4-way */
#define CRYPTO_ALGO_BIP 13 /* 802.11w BIP (aes cmac) */
#define CRYPTO_ALGO_AES_GCM 14 /* 128 bit GCM */
#define CRYPTO_ALGO_AES_CCM256 15 /* 256 bit CCM */
#define CRYPTO_ALGO_AES_GCM256 16 /* 256 bit GCM */
#define CRYPTO_ALGO_BIP_CMAC256 17 /* 256 bit BIP CMAC */
#define CRYPTO_ALGO_BIP_GMAC 18 /* 128 bit BIP GMAC */
#define CRYPTO_ALGO_BIP_GMAC256 19 /* 256 bit BIP GMAC */
#define CRYPTO_ALGO_NONE CRYPTO_ALGO_OFF
/* algo bit vector */
#define KEY_ALGO_MASK(_algo) (1 << _algo)
#if defined(BCMCCX) || defined(BCMEXTCCX)
#define KEY_ALGO_MASK_CCX (KEY_ALGO_MASK(CRYPTO_ALGO_CKIP) | \
KEY_ALGO_MASK(CRYPTO_ALGO_CKIP_MMH) | \
KEY_ALGO_MASK(CRYPTO_ALGO_WEP_MMH))
#endif /* defined(BCMCCX) || defined(BCMEXTCCX) */
#define KEY_ALGO_MASK_WEP (KEY_ALGO_MASK(CRYPTO_ALGO_WEP1) | \
KEY_ALGO_MASK(CRYPTO_ALGO_WEP128) | \
KEY_ALGO_MASK(CRYPTO_ALGO_NALG))
#define KEY_ALGO_MASK_AES (KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM) | \
KEY_ALGO_MASK(CRYPTO_ALGO_AES_CCM256) | \
KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM) | \
KEY_ALGO_MASK(CRYPTO_ALGO_AES_GCM256))
#define KEY_ALGO_MASK_TKIP (KEY_ALGO_MASK(CRYPTO_ALGO_TKIP))
#define KEY_ALGO_MASK_WAPI (KEY_ALGO_MASK(CRYPTO_ALGO_SMS4))
#define WSEC_GEN_MIC_ERROR 0x0001
#define WSEC_GEN_REPLAY 0x0002
#define WSEC_GEN_ICV_ERROR 0x0004
#define WSEC_GEN_MFP_ACT_ERROR 0x0008
#define WSEC_GEN_MFP_DISASSOC_ERROR 0x0010
#define WSEC_GEN_MFP_DEAUTH_ERROR 0x0020
#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
#if defined(BCMCCX) || defined(BCMEXTCCX)
#define WL_CKIP_KP (1 << 4) /* CMIC */
#define WL_CKIP_MMH (1 << 5) /* CKIP */
#else
#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
#endif /* BCMCCX || BCMEXTCCX */
#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */
#define WL_LINK_KEY (1 << 7) /* For linking keys of both cores */
#define WL_UNLINK_KEY (1 << 8) /* For unlinking keys of both cores */
/* wireless security bitvec */
#define WSEC_NONE 0x0
#define WEP_ENABLED 0x0001
#define TKIP_ENABLED 0x0002
#define AES_ENABLED 0x0004
#define WSEC_SWFLAG 0x0008
#ifdef BCMCCX
#define CKIP_KP_ENABLED 0x0010
#define CKIP_MIC_ENABLED 0x0020
#endif /* BCMCCX */
#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
#ifdef WLFIPS
#define FIPS_ENABLED 0x0080
#endif /* WLFIPS */
/* wsec macros for operating on the above definitions */
#ifdef WLWSEC
#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
#else /* WLWSEC */
#define WSEC_WEP_ENABLED(wsec) (FALSE)
#define WSEC_TKIP_ENABLED(wsec) (FALSE)
#define WSEC_AES_ENABLED(wsec) (FALSE)
#endif /* WLWSEC */
/* Macros to check if algorithm is enabled */
#define WSEC_INFO_ALGO_ENABLED(_wi, _algo) \
(_wi).cur_algos & (1 << CRYPTO_ALGO_##_algo)
#define WSEC_INFO_ALGO_NONE(_wi) (((_wi).cur_algos) == 0)
#ifdef WLWSEC
#ifdef BCMCCX
#define WSEC_CKIP_KP_ENABLED(wsec) ((wsec) & CKIP_KP_ENABLED)
#define WSEC_CKIP_MIC_ENABLED(wsec) ((wsec) & CKIP_MIC_ENABLED)
#define WSEC_CKIP_ENABLED(wsec) ((wsec) & (CKIP_KP_ENABLED|CKIP_MIC_ENABLED))
#ifndef BCMWAPI_WPI /* BCMWAPI_WPI */
#define WSEC_ENABLED(wsec) \
((wsec) & \
(WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | CKIP_KP_ENABLED | CKIP_MIC_ENABLED))
#endif /* BCMWAPI_WPI */
#else /* defined BCMCCX */
#ifndef BCMWAPI_WPI /* BCMWAPI_WPI */
#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
#endif /* BCMWAPI_WPI */
#endif /* BCMCCX */
#else /* WLWSEC */
#define WSEC_ENABLED(wsec) (FALSE)
#endif /* WLWSEC */
#define WSEC_SES_OW_ENABLED(wsec) ((wsec) & SES_OW_ENABLED)
/* Following macros are not used any more. Just kept here to
* avoid build issue in BISON/CARIBOU branch
*/
#define MFP_CAPABLE 0x0200
#define MFP_REQUIRED 0x0400
#define MFP_SHA256 0x0800 /* a special configuration for STA for WIFI test tool */
/* WPA authentication mode bitvec */
#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
#if defined(BCMCCX) || defined(BCMEXTCCX)
#define WPA_AUTH_CCKM 0x0008 /* CCKM */
#define WPA2_AUTH_CCKM 0x0010 /* CCKM2 */
#endif /* BCMCCX || BCMEXTCCX */
/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */
#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
#define BRCM_AUTH_PSK 0x0100 /* BRCM specific PSK */
#define BRCM_AUTH_DPT 0x0200 /* DPT PSK without group keys */
#if defined(BCMWAPI_WAI) || defined(BCMWAPI_WPI)
#define WPA_AUTH_WAPI 0x0400 /* why it is same as WAPI_AUTH_UNSPECIFIED */
#define WAPI_AUTH_NONE WPA_AUTH_NONE /* none (IBSS) */
#define WAPI_AUTH_UNSPECIFIED 0x0400 /* over AS */
#define WAPI_AUTH_PSK 0x0800 /* Pre-shared key */
#endif /* BCMWAPI_WAI || BCMWAPI_WPI */
#define WPA2_AUTH_1X_SHA256 0x1000 /* 1X with SHA256 key derivation */
#define WPA2_AUTH_TPK 0x2000 /* TDLS Peer Key */
#define WPA2_AUTH_FT 0x4000 /* Fast Transition. */
#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
#define WPA2_AUTH_FILS_SHA256 0x10000 /* FILS with SHA256 key derivation */
#define WPA2_AUTH_FILS_SHA384 0x20000 /* FILS with SHA384 key derivation */
#define WPA2_AUTH_IS_FILS(auth) ((auth) & (WPA2_AUTH_FILS_SHA256 | WPA2_AUTH_FILS_SHA384))
#define WPA3_AUTH_SAE_PSK 0x40000 /* SAE with 4-way handshake */
#define WPA3_AUTH_DPP_AKM 0x80000 /* Device Provisioning Protocol (DPP) */
#define WPA3_AUTH_OWE 0x100000 /* OWE */
#define WPA3_AUTH_1X_SUITE_B_SHA256 0x200000 /* Suite B SHA256 */
#define WPA3_AUTH_1X_SUITE_B_SHA384 0x400000 /* Suite B-192 SHA384 */
#define WPA3_AUTH_PSK_SHA384 0x800000 /* PSK with SHA384 key derivation */
#define WPA3_AUTH_SAE_AP_ONLY 0x1000000 /* SAE restriction to connect to pure SAE APs */
#define WPA3_AUTH_SAE_EXT_PSK 0x2000000 /* SAE (variable length PMK) 4-way handshake */
/* WPA2_AUTH_SHA256 not used anymore. Just kept here to avoid build issue in DINGO */
#define WPA2_AUTH_SHA256 0x8000
#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */
/* pmkid */
#define MAXPMKID 16 /* max # PMKID cache entries NDIS */
#ifdef MACOSX
/* Macos limits ioctl maxlen for TX to 1864 and for RX to 2004 */
#define WLC_IOCTL_MAXLEN 2000 /* "max" length ioctl buffer */
#else
#define WLC_IOCTL_MAXLEN 8192u /* "max" length ioctl buffer */
#endif /* MACOSX */
#define WLC_IOCTL_MEDLEN 1936u /* "med" length ioctl buffer */
#define WLC_IOCTL_SMLEN 256u /* "small" length ioctl buffer */
#define WLC_SAMPLECOLLECT_MAXLEN 10240u /* Max Sample Collect buffer for two cores */
#define WLC_IOCTL_NANRESP_MAXLEN 4096u /* "max" length nan ioctl resp buffer */
#define WLC_IOCTL_NANRESP_MEDLEN WLC_IOCTL_MEDLEN /* "med" length nan ioctl resp buffer */
/* common ioctl definitions */
#define WLC_GET_MAGIC 0
#define WLC_GET_VERSION 1
#define WLC_UP 2
#define WLC_DOWN 3
#define WLC_GET_LOOP 4
#define WLC_SET_LOOP 5
#define WLC_DUMP 6
#define WLC_GET_MSGLEVEL 7
#define WLC_SET_MSGLEVEL 8
#define WLC_GET_PROMISC 9
#define WLC_SET_PROMISC 10
/* #define WLC_OVERLAY_IOCTL 11 */ /* not supported */
#define WLC_GET_RATE 12
#define WLC_GET_MAX_RATE 13
#define WLC_GET_INSTANCE 14
/* #define WLC_GET_FRAG 15 */ /* no longer supported */
/* #define WLC_SET_FRAG 16 */ /* no longer supported */
/* #define WLC_GET_RTS 17 */ /* no longer supported */
/* #define WLC_SET_RTS 18 */ /* no longer supported */
#define WLC_GET_INFRA 19
#define WLC_SET_INFRA 20
#define WLC_GET_AUTH 21
#define WLC_SET_AUTH 22
#define WLC_GET_BSSID 23
#define WLC_SET_BSSID 24
#define WLC_GET_SSID 25
#define WLC_SET_SSID 26
#define WLC_RESTART 27
#define WLC_TERMINATED 28
/* #define WLC_DUMP_SCB 28 */ /* no longer supported */
#define WLC_GET_CHANNEL 29
#define WLC_SET_CHANNEL 30
#define WLC_GET_SRL 31
#define WLC_SET_SRL 32
#define WLC_GET_LRL 33
#define WLC_SET_LRL 34
#define WLC_GET_PLCPHDR 35
#define WLC_SET_PLCPHDR 36
#define WLC_GET_RADIO 37
#define WLC_SET_RADIO 38
#define WLC_GET_PHYTYPE 39
#define WLC_DUMP_RATE 40
#define WLC_SET_RATE_PARAMS 41
#define WLC_GET_FIXRATE 42
#define WLC_SET_FIXRATE 43
/* #define WLC_GET_WEP 42 */ /* no longer supported */
/* #define WLC_SET_WEP 43 */ /* no longer supported */
#define WLC_GET_KEY 44
#define WLC_SET_KEY 45
#define WLC_GET_REGULATORY 46
#define WLC_SET_REGULATORY 47
#define WLC_GET_PASSIVE_SCAN 48
#define WLC_SET_PASSIVE_SCAN 49
#define WLC_SCAN 50
#define WLC_SCAN_RESULTS 51
#define WLC_DISASSOC 52
#define WLC_REASSOC 53
#define WLC_GET_ROAM_TRIGGER 54
#define WLC_SET_ROAM_TRIGGER 55
#define WLC_GET_ROAM_DELTA 56
#define WLC_SET_ROAM_DELTA 57
#define WLC_GET_ROAM_SCAN_PERIOD 58
#define WLC_SET_ROAM_SCAN_PERIOD 59
#define WLC_EVM 60 /* diag */
#define WLC_GET_TXANT 61
#define WLC_SET_TXANT 62
#define WLC_GET_ANTDIV 63
#define WLC_SET_ANTDIV 64
/* #define WLC_GET_TXPWR 65 */ /* no longer supported */
/* #define WLC_SET_TXPWR 66 */ /* no longer supported */
#define WLC_GET_CLOSED 67
#define WLC_SET_CLOSED 68
#define WLC_GET_MACLIST 69
#define WLC_SET_MACLIST 70
#define WLC_GET_RATESET 71
#define WLC_SET_RATESET 72
/* #define WLC_GET_LOCALE 73 */ /* no longer supported */
#define WLC_LONGTRAIN 74
#define WLC_GET_BCNPRD 75
#define WLC_SET_BCNPRD 76
#define WLC_GET_DTIMPRD 77
#define WLC_SET_DTIMPRD 78
#define WLC_GET_SROM 79
#define WLC_SET_SROM 80
#define WLC_GET_WEP_RESTRICT 81
#define WLC_SET_WEP_RESTRICT 82
#define WLC_GET_COUNTRY 83
#define WLC_SET_COUNTRY 84
#define WLC_GET_PM 85
#define WLC_SET_PM 86
#define WLC_GET_WAKE 87
#define WLC_SET_WAKE 88
/* #define WLC_GET_D11CNTS 89 */ /* -> "counters" iovar */
#define WLC_GET_FORCELINK 90 /* ndis only */
#define WLC_SET_FORCELINK 91 /* ndis only */
#define WLC_FREQ_ACCURACY 92 /* diag */
#define WLC_CARRIER_SUPPRESS 93 /* diag */
#define WLC_GET_PHYREG 94
#define WLC_SET_PHYREG 95
#define WLC_GET_RADIOREG 96
#define WLC_SET_RADIOREG 97
#define WLC_GET_REVINFO 98
#define WLC_GET_UCANTDIV 99
#define WLC_SET_UCANTDIV 100
#define WLC_R_REG 101
#define WLC_W_REG 102
/* #define WLC_DIAG_LOOPBACK 103 old tray diag */
/* #define WLC_RESET_D11CNTS 104 */ /* -> "reset_d11cnts" iovar */
#define WLC_GET_MACMODE 105
#define WLC_SET_MACMODE 106
#define WLC_GET_MONITOR 107
#define WLC_SET_MONITOR 108
#define WLC_GET_GMODE 109
#define WLC_SET_GMODE 110
#define WLC_GET_LEGACY_ERP 111
#define WLC_SET_LEGACY_ERP 112
#define WLC_GET_RX_ANT 113
#define WLC_GET_CURR_RATESET 114 /* current rateset */
#define WLC_GET_SCANSUPPRESS 115
#define WLC_SET_SCANSUPPRESS 116
#define WLC_GET_AP 117
#define WLC_SET_AP 118
#define WLC_GET_EAP_RESTRICT 119
#define WLC_SET_EAP_RESTRICT 120
#define WLC_SCB_AUTHORIZE 121
#define WLC_SCB_DEAUTHORIZE 122
#define WLC_GET_WDSLIST 123
#define WLC_SET_WDSLIST 124
#define WLC_GET_ATIM 125
#define WLC_SET_ATIM 126
#define WLC_GET_RSSI 127
#define WLC_GET_PHYANTDIV 128
#define WLC_SET_PHYANTDIV 129
#define WLC_AP_RX_ONLY 130
#define WLC_GET_TX_PATH_PWR 131
#define WLC_SET_TX_PATH_PWR 132
#define WLC_GET_WSEC 133
#define WLC_SET_WSEC 134
#define WLC_GET_PHY_NOISE 135
#define WLC_GET_BSS_INFO 136
#define WLC_GET_PKTCNTS 137
#define WLC_GET_LAZYWDS 138
#define WLC_SET_LAZYWDS 139
#define WLC_GET_BANDLIST 140
#define WLC_GET_BAND 141
#define WLC_SET_BAND 142
#define WLC_SCB_DEAUTHENTICATE 143
#define WLC_GET_SHORTSLOT 144
#define WLC_GET_SHORTSLOT_OVERRIDE 145
#define WLC_SET_SHORTSLOT_OVERRIDE 146
#define WLC_GET_SHORTSLOT_RESTRICT 147
#define WLC_SET_SHORTSLOT_RESTRICT 148
#define WLC_GET_GMODE_PROTECTION 149
#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
#define WLC_UPGRADE 152
/* #define WLC_GET_MRATE 153 */ /* no longer supported */
/* #define WLC_SET_MRATE 154 */ /* no longer supported */
#define WLC_GET_IGNORE_BCNS 155
#define WLC_SET_IGNORE_BCNS 156
#define WLC_GET_SCB_TIMEOUT 157
#define WLC_SET_SCB_TIMEOUT 158
#define WLC_GET_ASSOCLIST 159
#define WLC_GET_CLK 160
#define WLC_SET_CLK 161
#define WLC_GET_UP 162
#define WLC_OUT 163
#define WLC_GET_WPA_AUTH 164
#define WLC_SET_WPA_AUTH 165
#define WLC_GET_UCFLAGS 166
#define WLC_SET_UCFLAGS 167
#define WLC_GET_PWRIDX 168
#define WLC_SET_PWRIDX 169
#define WLC_GET_TSSI 170
#define WLC_GET_SUP_RATESET_OVERRIDE 171
#define WLC_SET_SUP_RATESET_OVERRIDE 172
/* #define WLC_SET_FAST_TIMER 173 */ /* no longer supported */
/* #define WLC_GET_FAST_TIMER 174 */ /* no longer supported */
/* #define WLC_SET_SLOW_TIMER 175 */ /* no longer supported */
/* #define WLC_GET_SLOW_TIMER 176 */ /* no longer supported */
/* #define WLC_DUMP_PHYREGS 177 */ /* no longer supported */
#define WLC_GET_PROTECTION_CONTROL 178
#define WLC_SET_PROTECTION_CONTROL 179
#define WLC_GET_PHYLIST 180
#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
#define WLC_DECRYPT_STATUS 182 /* ndis only */
#define WLC_GET_KEY_SEQ 183
#define WLC_GET_SCAN_CHANNEL_TIME 184
#define WLC_SET_SCAN_CHANNEL_TIME 185
#define WLC_GET_SCAN_UNASSOC_TIME 186
#define WLC_SET_SCAN_UNASSOC_TIME 187
#define WLC_GET_SCAN_HOME_TIME 188
#define WLC_SET_SCAN_HOME_TIME 189
#define WLC_GET_SCAN_NPROBES 190
#define WLC_SET_SCAN_NPROBES 191
#define WLC_GET_PRB_RESP_TIMEOUT 192
#define WLC_SET_PRB_RESP_TIMEOUT 193
#define WLC_GET_ATTEN 194
#define WLC_SET_ATTEN 195
#define WLC_GET_SHMEM 196 /* diag */
#define WLC_SET_SHMEM 197 /* diag */
/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */
/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */
#define WLC_SET_WSEC_TEST 200
#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
#define WLC_TKIP_COUNTERMEASURES 202
#define WLC_GET_PIOMODE 203
#define WLC_SET_PIOMODE 204
#define WLC_SET_ASSOC_PREFER 205
#define WLC_GET_ASSOC_PREFER 206
#define WLC_SET_ROAM_PREFER 207
#define WLC_GET_ROAM_PREFER 208
/* #define WLC_SET_LED 209 */ /* no longer supported */
/* #define WLC_GET_LED 210 */ /* no longer supported */
#define WLC_GET_INTERFERENCE_MODE 211
#define WLC_SET_INTERFERENCE_MODE 212
#define WLC_GET_CHANNEL_QA 213
#define WLC_START_CHANNEL_QA 214
#define WLC_GET_CHANNEL_SEL 215
#define WLC_START_CHANNEL_SEL 216
#define WLC_GET_VALID_CHANNELS 217
#define WLC_GET_FAKEFRAG 218
#define WLC_SET_FAKEFRAG 219
#define WLC_GET_PWROUT_PERCENTAGE 220
#define WLC_SET_PWROUT_PERCENTAGE 221
#define WLC_SET_BAD_FRAME_PREEMPT 222
#define WLC_GET_BAD_FRAME_PREEMPT 223
#define WLC_SET_LEAP_LIST 224
#define WLC_GET_LEAP_LIST 225
#define WLC_GET_CWMIN 226
#define WLC_SET_CWMIN 227
#define WLC_GET_CWMAX 228
#define WLC_SET_CWMAX 229
#define WLC_GET_WET 230
#define WLC_SET_WET 231
#define WLC_GET_PUB 232
/* #define WLC_SET_GLACIAL_TIMER 233 */ /* no longer supported */
/* #define WLC_GET_GLACIAL_TIMER 234 */ /* no longer supported */
#define WLC_GET_KEY_PRIMARY 235
#define WLC_SET_KEY_PRIMARY 236
/* #define WLC_DUMP_RADIOREGS 237 */ /* no longer supported */
#define WLC_GET_ACI_ARGS 238
#define WLC_SET_ACI_ARGS 239
#define WLC_UNSET_CALLBACK 240
#define WLC_SET_CALLBACK 241
#define WLC_GET_RADAR 242
#define WLC_SET_RADAR 243
#define WLC_SET_SPECT_MANAGMENT 244
#define WLC_GET_SPECT_MANAGMENT 245
#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */
#define WLC_WDS_GET_WPA_SUP 247
#define WLC_SET_CS_SCAN_TIMER 248
#define WLC_GET_CS_SCAN_TIMER 249
#define WLC_MEASURE_REQUEST 250
#define WLC_INIT 251
#define WLC_SEND_QUIET 252
#define WLC_KEEPALIVE 253
#define WLC_SEND_PWR_CONSTRAINT 254
#define WLC_UPGRADE_STATUS 255
#define WLC_CURRENT_PWR 256
#define WLC_GET_SCAN_PASSIVE_TIME 257
#define WLC_SET_SCAN_PASSIVE_TIME 258
#define WLC_LEGACY_LINK_BEHAVIOR 259
#define WLC_GET_CHANNELS_IN_COUNTRY 260
#define WLC_GET_COUNTRY_LIST 261
#define WLC_GET_VAR 262 /* get value of named variable */
#define WLC_SET_VAR 263 /* set named variable to value */
#define WLC_NVRAM_GET 264 /* deprecated */
#define WLC_NVRAM_SET 265
#define WLC_NVRAM_DUMP 266
#define WLC_REBOOT 267
#define WLC_SET_WSEC_PMK 268
#define WLC_GET_AUTH_MODE 269
#define WLC_SET_AUTH_MODE 270
#define WLC_GET_WAKEENTRY 271
#define WLC_SET_WAKEENTRY 272
#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
#define WLC_NVOTPW 274
#define WLC_OTPW 275
#define WLC_IOV_BLOCK_GET 276
#define WLC_IOV_MODULES_GET 277
#define WLC_SOFT_RESET 278
#define WLC_GET_ALLOW_MODE 279
#define WLC_SET_ALLOW_MODE 280
#define WLC_GET_DESIRED_BSSID 281
#define WLC_SET_DESIRED_BSSID 282
#define WLC_DISASSOC_MYAP 283
#define WLC_GET_NBANDS 284 /* for Dongle EXT_STA support */
#define WLC_GET_BANDSTATES 285 /* for Dongle EXT_STA support */
#define WLC_GET_WLC_BSS_INFO 286 /* for Dongle EXT_STA support */
#define WLC_GET_ASSOC_INFO 287 /* for Dongle EXT_STA support */
#define WLC_GET_OID_PHY 288 /* for Dongle EXT_STA support */
#define WLC_SET_OID_PHY 289 /* for Dongle EXT_STA support */
#define WLC_SET_ASSOC_TIME 290 /* for Dongle EXT_STA support */
#define WLC_GET_DESIRED_SSID 291 /* for Dongle EXT_STA support */
#define WLC_GET_CHANSPEC 292 /* for Dongle EXT_STA support */
#define WLC_GET_ASSOC_STATE 293 /* for Dongle EXT_STA support */
#define WLC_SET_PHY_STATE 294 /* for Dongle EXT_STA support */
#define WLC_GET_SCAN_PENDING 295 /* for Dongle EXT_STA support */
#define WLC_GET_SCANREQ_PENDING 296 /* for Dongle EXT_STA support */
#define WLC_GET_PREV_ROAM_REASON 297 /* for Dongle EXT_STA support */
#define WLC_SET_PREV_ROAM_REASON 298 /* for Dongle EXT_STA support */
#define WLC_GET_BANDSTATES_PI 299 /* for Dongle EXT_STA support */
#define WLC_GET_PHY_STATE 300 /* for Dongle EXT_STA support */
#define WLC_GET_BSS_WPA_RSN 301 /* for Dongle EXT_STA support */
#define WLC_GET_BSS_WPA2_RSN 302 /* for Dongle EXT_STA support */
#define WLC_GET_BSS_BCN_TS 303 /* for Dongle EXT_STA support */
#define WLC_GET_INT_DISASSOC 304 /* for Dongle EXT_STA support */
#define WLC_SET_NUM_PEERS 305 /* for Dongle EXT_STA support */
#define WLC_GET_NUM_BSS 306 /* for Dongle EXT_STA support */
#define WLC_PHY_SAMPLE_COLLECT 307 /* phy sample collect mode */
/* #define WLC_UM_PRIV 308 */ /* Deprecated: usermode driver */
#define WLC_GET_CMD 309
/* #define WLC_LAST 310 */ /* Never used - can be reused */
#define WLC_SET_INTERFERENCE_OVERRIDE_MODE 311 /* set inter mode override */
#define WLC_GET_INTERFERENCE_OVERRIDE_MODE 312 /* get inter mode override */
/* #define WLC_GET_WAI_RESTRICT 313 */ /* for WAPI, deprecated use iovar instead */
/* #define WLC_SET_WAI_RESTRICT 314 */ /* for WAPI, deprecated use iovar instead */
/* #define WLC_SET_WAI_REKEY 315 */ /* for WAPI, deprecated use iovar instead */
#define WLC_SET_NAT_CONFIG 316 /* for configuring NAT filter driver */
#define WLC_GET_NAT_STATE 317
#define WLC_GET_TXBF_RATESET 318
#define WLC_SET_TXBF_RATESET 319
#define WLC_SCAN_CQ 320
#define WLC_GET_RSSI_QDB 321 /* qdB portion of the RSSI */
#define WLC_DUMP_RATESET 322
#define WLC_ECHO 323
#define WLC_LAST 324 /* The last ioctl. Also push this
* number when adding new ioctls
*/
/*
* Alert:
* Duplicate a few definitions that irelay requires from epiioctl.h here
* so caller doesn't have to include this file and epiioctl.h .
* If this grows any more, it would be time to move these irelay-specific
* definitions out of the epiioctl.h and into a separate driver common file.
*/
#ifndef EPICTRL_COOKIE
#define EPICTRL_COOKIE 0xABADCEDE
#endif
/* vx wlc ioctl's offset */
#define CMN_IOCTL_OFF 0x180
/*
* custom OID support
*
* 0xFF - implementation specific OID
* 0xE4 - first byte of Broadcom PCI vendor ID
* 0x14 - second byte of Broadcom PCI vendor ID
* 0xXX - the custom OID number
*/
/* begin 0x1f values beyond the start of the ET driver range. */
#define WL_OID_BASE 0xFFE41420
/* NDIS overrides */
#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
#define OID_LEGACY_LINK_BEHAVIOR (WL_OID_BASE + WLC_LEGACY_LINK_BEHAVIOR)
#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
/* EXT_STA Dongle suuport */
#define OID_STA_CHANSPEC (WL_OID_BASE + WLC_GET_CHANSPEC)
#define OID_STA_NBANDS (WL_OID_BASE + WLC_GET_NBANDS)
#define OID_STA_GET_PHY (WL_OID_BASE + WLC_GET_OID_PHY)
#define OID_STA_SET_PHY (WL_OID_BASE + WLC_SET_OID_PHY)
#define OID_STA_ASSOC_TIME (WL_OID_BASE + WLC_SET_ASSOC_TIME)
#define OID_STA_DESIRED_SSID (WL_OID_BASE + WLC_GET_DESIRED_SSID)
#define OID_STA_SET_PHY_STATE (WL_OID_BASE + WLC_SET_PHY_STATE)
#define OID_STA_SCAN_PENDING (WL_OID_BASE + WLC_GET_SCAN_PENDING)
#define OID_STA_SCANREQ_PENDING (WL_OID_BASE + WLC_GET_SCANREQ_PENDING)
#define OID_STA_GET_ROAM_REASON (WL_OID_BASE + WLC_GET_PREV_ROAM_REASON)
#define OID_STA_SET_ROAM_REASON (WL_OID_BASE + WLC_SET_PREV_ROAM_REASON)
#define OID_STA_GET_PHY_STATE (WL_OID_BASE + WLC_GET_PHY_STATE)
#define OID_STA_INT_DISASSOC (WL_OID_BASE + WLC_GET_INT_DISASSOC)
#define OID_STA_SET_NUM_PEERS (WL_OID_BASE + WLC_SET_NUM_PEERS)
#define OID_STA_GET_NUM_BSS (WL_OID_BASE + WLC_GET_NUM_BSS)
/* NAT filter driver support */
#define OID_NAT_SET_CONFIG (WL_OID_BASE + WLC_SET_NAT_CONFIG)
#define OID_NAT_GET_STATE (WL_OID_BASE + WLC_GET_NAT_STATE)
#define WL_DECRYPT_STATUS_SUCCESS 1
#define WL_DECRYPT_STATUS_FAILURE 2
#define WL_DECRYPT_STATUS_UNKNOWN 3
/* allows user-mode app to poll the status of USB image upgrade */
#define WLC_UPGRADE_SUCCESS 0
#define WLC_UPGRADE_PENDING 1
/* WLC_GET_AUTH, WLC_SET_AUTH values */
#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */
#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */
#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */
#define WL_AUTH_SAE_KEY 3 /* d11 sae authentication */
#define WL_AUTH_FILS_SHARED 4 /* d11 fils shared key authentication */
#define WL_AUTH_FILS_SHARED_PFS 5 /* d11 fils shared key w/ pfs authentication */
#define WL_AUTH_FILS_PUBLIC 6 /* d11 fils public key authentication */
/* Some branch use different define for WL_AUTH_OPEN_SHARED
* for example, PHOENIX2 Branch defined WL_AUTH_OPEN_SHARED as 3
* But other branch defined WL_AUTH_OPEN_SHARED as 2
* if it is mismatch, WEP association can be failed.
* More information - RB:5320
*/
/* a large TX Power as an init value to factor out of MIN() calculations,
* keep low enough to fit in an int8, units are .25 dBm
*/
#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */
/* "diag" iovar argument and error code */
#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */
#define WL_DIAG_MEMORY 3 /* d11 memory test */
#define WL_DIAG_LED 4 /* LED test */
#define WL_DIAG_REG 5 /* d11/phy register test */
#define WL_DIAG_SROM 6 /* srom read/crc test */
#define WL_DIAG_DMA 7 /* DMA test */
#define WL_DIAG_LOOPBACK_EXT 8 /* enhenced d11 loopback data test */
#define WL_DIAGERR_SUCCESS 0
#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */
#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */
/* band types */
#define WLC_BAND_AUTO 0 /* auto-select */
#define WLC_BAND_5G 1 /* 5 Ghz */
#define WLC_BAND_2G 2 /* 2.4 Ghz */
#define WLC_BAND_ALL 3 /* all bands */
#define WLC_BAND_6G 4 /* 6 Ghz */
#define WLC_BAND_INVALID -1 /* Invalid band */
#define WL_BAND_MAX_CNT 3 /* max number of bands supported */
/* band range returned by band_range iovar */
#define WL_CHAN_FREQ_RANGE_2G 0
#define WL_CHAN_FREQ_RANGE_5GL 1
#define WL_CHAN_FREQ_RANGE_5GM 2
#define WL_CHAN_FREQ_RANGE_5GH 3
#define WL_CHAN_FREQ_RANGE_5GLL_5BAND 4
#define WL_CHAN_FREQ_RANGE_5GLH_5BAND 5
#define WL_CHAN_FREQ_RANGE_5GML_5BAND 6
#define WL_CHAN_FREQ_RANGE_5GMH_5BAND 7
#define WL_CHAN_FREQ_RANGE_5GH_5BAND 8
#define WL_CHAN_FREQ_RANGE_5G_BAND0 1
#define WL_CHAN_FREQ_RANGE_5G_BAND1 2
#define WL_CHAN_FREQ_RANGE_5G_BAND2 3
#define WL_CHAN_FREQ_RANGE_5G_BAND3 4
#define WL_CHAN_FREQ_RANGE_5G_4BAND 5
#define WL_CHAN_FREQ_RANGE_6G_6BAND 6
/* SROM12 */
#define WL_CHAN_FREQ_RANGE_5G_BAND4 5
#define WL_CHAN_FREQ_RANGE_2G_40 6
#define WL_CHAN_FREQ_RANGE_5G_BAND0_40 7
#define WL_CHAN_FREQ_RANGE_5G_BAND1_40 8
#define WL_CHAN_FREQ_RANGE_5G_BAND2_40 9
#define WL_CHAN_FREQ_RANGE_5G_BAND3_40 10
#define WL_CHAN_FREQ_RANGE_5G_BAND4_40 11
#define WL_CHAN_FREQ_RANGE_5G_BAND0_80 12
#define WL_CHAN_FREQ_RANGE_5G_BAND1_80 13
#define WL_CHAN_FREQ_RANGE_5G_BAND2_80 14
#define WL_CHAN_FREQ_RANGE_5G_BAND3_80 15
#define WL_CHAN_FREQ_RANGE_5G_BAND4_80 16
#define WL_CHAN_FREQ_RANGE_5G_5BAND 18
#define WL_CHAN_FREQ_RANGE_5G_5BAND_40 19
#define WL_CHAN_FREQ_RANGE_5G_5BAND_80 20
#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
#define WLC_MACMODE_AVOID 3 /* Avoid specified (i.e. conditionally avoid unspecified) */
/*
* 54g modes (basic bits may still be overridden)
*
* GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11
* Preamble: Long
* Shortslot: Off
* GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
* Extended Rateset: 6, 9, 12, 48
* Preamble: Long
* Shortslot: Auto
* GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
* Extended Rateset: 6b, 9, 12b, 48
* Preamble: Short required
* Shortslot: Auto
* GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
* Extended Rateset: 6, 9, 12, 48
* Preamble: Long
* Shortslot: On
* GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
* Preamble: Short required
* Shortslot: On and required
* GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b
* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
* Preamble: Long
* Shortslot: Auto
*/
#define GMODE_LEGACY_B 0
#define GMODE_AUTO 1
#define GMODE_ONLY 2
#define GMODE_B_DEFERRED 3
#define GMODE_PERFORMANCE 4
#define GMODE_LRS 5
#define GMODE_MAX 6
/* values for PLCPHdr_override */
#define WLC_PLCP_AUTO -1
#define WLC_PLCP_SHORT 0
#define WLC_PLCP_LONG 1
/* values for g_protection_override and n_protection_override */
#define WLC_PROTECTION_AUTO -1
#define WLC_PROTECTION_OFF 0
#define WLC_PROTECTION_ON 1
#define WLC_PROTECTION_MMHDR_ONLY 2
#define WLC_PROTECTION_CTS_ONLY 3
/* values for g_protection_control and n_protection_control */
#define WLC_PROTECTION_CTL_OFF 0
#define WLC_PROTECTION_CTL_LOCAL 1
#define WLC_PROTECTION_CTL_OVERLAP 2
/* values for n_protection */
#define WLC_N_PROTECTION_OFF 0
#define WLC_N_PROTECTION_OPTIONAL 1
#define WLC_N_PROTECTION_20IN40 2
#define WLC_N_PROTECTION_MIXEDMODE 3
/* values for n_preamble_type */
#define WLC_N_PREAMBLE_MIXEDMODE 0
#define WLC_N_PREAMBLE_GF 1
#define WLC_N_PREAMBLE_GF_BRCM 2
/* values for band specific 40MHz capabilities (deprecated) */
#define WLC_N_BW_20ALL 0
#define WLC_N_BW_40ALL 1
#define WLC_N_BW_20IN2G_40IN5G 2
#define WLC_BW_20MHZ_BIT (1<<0)
#define WLC_BW_40MHZ_BIT (1<<1)
#define WLC_BW_80MHZ_BIT (1<<2)
#define WLC_BW_160MHZ_BIT (1<<3)
#define WLC_BW_320MHZ_BIT (1u<<4u)
/* Bandwidth capabilities */
#define WLC_BW_CAP_20MHZ (WLC_BW_20MHZ_BIT)
#define WLC_BW_CAP_40MHZ (WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
#define WLC_BW_CAP_80MHZ (WLC_BW_80MHZ_BIT|WLC_BW_40MHZ_BIT| \
WLC_BW_20MHZ_BIT)
#define WLC_BW_CAP_160MHZ (WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \
WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
#define WLC_BW_CAP_320MHZ (WLC_BW_320MHZ_BIT| \
WLC_BW_160MHZ_BIT|WLC_BW_80MHZ_BIT| \
WLC_BW_40MHZ_BIT|WLC_BW_20MHZ_BIT)
#define WLC_BW_CAP_UNRESTRICTED 0xFF
#define WL_BW_CAP_20MHZ(bw_cap) (((bw_cap) & WLC_BW_20MHZ_BIT) ? TRUE : FALSE)
#define WL_BW_CAP_40MHZ(bw_cap) (((bw_cap) & WLC_BW_40MHZ_BIT) ? TRUE : FALSE)
#define WL_BW_CAP_80MHZ(bw_cap) (((bw_cap) & WLC_BW_80MHZ_BIT) ? TRUE : FALSE)
#define WL_BW_CAP_160MHZ(bw_cap) (((bw_cap) & WLC_BW_160MHZ_BIT) ? TRUE : FALSE)
#define WL_BW_CAP_320MHZ(bw_cap) (((bw_cap) & WLC_BW_320MHZ_BIT) ? TRUE : FALSE)
/* values to force tx/rx chain */
#define WLC_N_TXRX_CHAIN0 0
#define WLC_N_TXRX_CHAIN1 1
/* bitflags for SGI support (sgi_rx iovar) */
#define WLC_N_SGI_20 0x01
#define WLC_N_SGI_40 0x02
#define WLC_VHT_SGI_80 0x04
#define WLC_VHT_SGI_160 0x08
/* when sgi_tx==WLC_SGI_ALL, bypass rate selection, enable sgi for all mcs */
#define WLC_SGI_ALL 0x02
#define LISTEN_INTERVAL 10
/* interference mitigation options */
#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */
#define INTERFERE_NONE 0 /* off */
#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
#define WLAN_MANUAL 2 /* ACI: no auto detection */
#define WLAN_AUTO 3 /* ACI: auto detect */
#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */
#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */
/* interfernece mode bit-masks (ACPHY) */
#define ACPHY_ACI_GLITCHBASED_DESENSE 1 /* bit 0 */
#define ACPHY_ACI_HWACI_PKTGAINLMT 2 /* bit 1 */
#define ACPHY_ACI_W2NB_PKTGAINLMT 4 /* bit 2 */
#define ACPHY_ACI_PREEMPTION 8 /* bit 3 */
#define ACPHY_HWACI_MITIGATION 16 /* bit 4 */
#define ACPHY_LPD_PREEMPTION 32 /* bit 5 */
#define ACPHY_HWOBSS_MITIGATION 64 /* bit 6 */
#define ACPHY_ACI_MAX_MODE 127
/* AP environment */
#define AP_ENV_DETECT_NOT_USED 0 /* We aren't using AP environment detection */
#define AP_ENV_DENSE 1 /* "Corporate" or other AP dense environment */
#define AP_ENV_SPARSE 2 /* "Home" or other sparse environment */
#define AP_ENV_INDETERMINATE 3 /* AP environment hasn't been identified */
/* WL_OTA START */
#define WL_OTA_ARG_PARSE_BLK_SIZE 1200
#define WL_OTA_TEST_MAX_NUM_RATE 30
#define WL_OTA_TEST_MAX_NUM_SEQ 100
#define WL_OTA_TEST_MAX_NUM_RSSI 85
#define WL_THRESHOLD_LO_BAND 70 /* range from 5250MHz - 5350MHz */
/* radar iovar SET defines */
#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */
#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */
#define WL_RADAR_SIMULATED 2 /* force radar detector to declare
* detection once
*/
#define WL_RADAR_SIMULATED_SC 3 /* force radar detector to declare
* detection once on scan core
* if available and active
*/
#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */
#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */
#define WL_ANT_HT_RX_MAX 4 /* max 4 receive antennas/cores */
#define WL_ANT_IDX_1 0 /* antenna index 1 */
#define WL_ANT_IDX_2 1 /* antenna index 2 */
#ifndef WL_RSSI_ANT_MAX
#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
#elif WL_RSSI_ANT_MAX != 4
#error "WL_RSSI_ANT_MAX does not match"
#endif
/* dfs_status iovar-related defines */
/* cac - channel availability check,
* ism - in-service monitoring
* csa - channel switching announcement
*/
/* cac state values */
#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */
#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */
#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */
#define WL_DFS_CACSTATE_CSA 3 /* csa */
#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */
#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */
#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */
#define WL_DFS_CACSTATES 7 /* this many states exist */
/* Defines used with channel_bandwidth for curpower */
#define WL_BW_20MHZ 0
#define WL_BW_40MHZ 1
#define WL_BW_80MHZ 2
#define WL_BW_160MHZ 3
#define WL_BW_8080MHZ 4
#define WL_BW_2P5MHZ 5
#define WL_BW_5MHZ 6
#define WL_BW_10MHZ 7
#define WL_BW_320MHZ 8u
/* tx_power_t.flags bits */
#define WL_TX_POWER_F_ENABLED 1
#define WL_TX_POWER_F_HW 2
#define WL_TX_POWER_F_MIMO 4
#define WL_TX_POWER_F_SISO 8
#define WL_TX_POWER_F_HT 0x10
#define WL_TX_POWER_F_VHT 0x20
#define WL_TX_POWER_F_OPENLOOP 0x40
#define WL_TX_POWER_F_PROP11NRATES 0x80
#define WL_TX_POWER_F_UNIT_QDBM 0x100
#define WL_TX_POWER_F_TXCAP 0x200
#define WL_TX_POWER_F_HE 0x400
#define WL_TX_POWER_F_RU_RATE 0x800
#define WL_TX_POWER_TPE_PSD 0x1000
#define WL_TX_POWER_TPE_LOC 0x2000
/* Message levels */
#define WL_ERROR_VAL 0x00000001
#define WL_TRACE_VAL 0x00000002
#define WL_PRHDRS_VAL 0x00000004
#define WL_PRPKT_VAL 0x00000008
#define WL_INFORM_VAL 0x00000010
#define WL_TMP_VAL 0x00000020
#define WL_OID_VAL 0x00000040
#define WL_RATE_VAL 0x00000080
#define WL_ASSOC_VAL 0x00000100
#define WL_PRUSR_VAL 0x00000200
#define WL_PS_VAL 0x00000400
#define WL_TXPWR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
#define WL_MODE_SWITCH_VAL 0x00000800 /* Using retired TXPWR val */
#define WL_PORT_VAL 0x00001000
#define WL_DUAL_VAL 0x00002000
#define WL_WSEC_VAL 0x00004000
#define WL_WSEC_DUMP_VAL 0x00008000
#define WL_LOG_VAL 0x00010000
#define WL_NRSSI_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
#define WL_BCNTRIM_VAL 0x00020000 /* Using retired NRSSI VAL */
#define WL_LOFT_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
#define WL_PFN_VAL 0x00040000 /* Using retired LOFT_VAL */
#define WL_REGULATORY_VAL 0x00080000
#define WL_CSA_VAL 0x00080000 /* Reusing REGULATORY_VAL due to lackof bits */
#define WL_TAF_VAL 0x00100000
#define WL_RADAR_VAL 0x00000000 /* retired in TOT on 6/10/2009 */
#define WL_WDI_VAL 0x00200000 /* Using retired WL_RADAR_VAL VAL */
#define WL_MPC_VAL 0x00400000
#define WL_APSTA_VAL 0x00800000
#define WL_DFS_VAL 0x01000000
#define WL_BA_VAL 0x00000000 /* retired in TOT on 6/14/2010 */
#define WL_MUMIMO_VAL 0x02000000 /* Using retired WL_BA_VAL */
#define WL_ACI_VAL 0x04000000
#define WL_PRMAC_VAL 0x04000000
#define WL_MBSS_VAL 0x04000000
#define WL_CAC_VAL 0x08000000
#define WL_AMSDU_VAL 0x10000000
#define WL_AMPDU_VAL 0x20000000
#define WL_FFPLD_VAL 0x40000000
#define WL_ROAM_EXP_VAL 0x80000000
/* wl_msg_level is full. For new bits take the next one and AND with
* wl_msg_level2 in wl_dbg.h
*/
#define WL_DPT_VAL 0x00000001
/* re-using WL_DPT_VAL */
/* re-using WL_MESH_VAL */
#define WL_NATOE_VAL 0x00000001
#define WL_MESH_VAL 0x00000001
#define WL_SCAN_VAL 0x00000002
#define WL_WOWL_VAL 0x00000004
#define WL_COEX_VAL 0x00000008
#define WL_RTDC_VAL 0x00000010
#define WL_PROTO_VAL 0x00000020
#define WL_SWDIV_VAL 0x00000040
#define WL_CHANINT_VAL 0x00000080
#define WL_WMF_VAL 0x00000100
#define WL_P2P_VAL 0x00000200
#define WL_ITFR_VAL 0x00000400
#define WL_MCHAN_VAL 0x00000800
#define WL_TDLS_VAL 0x00001000
#define WL_MCNX_VAL 0x00002000
#define WL_PROT_VAL 0x00004000
#define WL_TSO_VAL 0x00010000
#define WL_TRF_MGMT_VAL 0x00020000
#define WL_LPC_VAL 0x00040000
#define WL_L2FILTER_VAL 0x00080000
#define WL_TXBF_VAL 0x00100000
#define WL_P2PO_VAL 0x00200000
#define WL_TBTT_VAL 0x00400000
#define WL_FBT_VAL 0x00800000
#define WL_RRM_VAL 0x00800000 /* reuse */
#define WL_MQ_VAL 0x01000000
#define WL_RANDMAC_VAL 0x02000000
#define WL_WNM_VAL 0x04000000
/* re-using WL_WNM_VAL for MBO */
#define WL_MBO_VAL 0x04000000
#define WL_NET_DETECT_VAL 0x20000000
#define WL_OCE_VAL 0x20000000 /* reuse */
#define WL_PCIE_VAL 0x40000000
#define WL_PMDUR_VAL 0x80000000
/* use top-bit for WL_TIME_STAMP_VAL because this is a modifier
* rather than a message-type of its own
*/
#define WL_TIMESTAMP_VAL 0x80000000
/* wl_msg_level2 is full. For new bits take the next one and AND with
* wl_msg_level3 in wl_dbg.h
*/
#define WL_ASSOC_AP_VAL 0x00000001
#define WL_FILS_VAL 0x00000002
#define WL_LATENCY_VAL 0x00000004
#define WL_WBUS_VAL 0x00000008
#define WL_DTPC_DBG_VAL 0x00000010
#define WL_DYNBW_DBG_VAL 0x00000020
#define WL_RATE_INFO_VAL 0x00000040
#define WL_RATE_TRACE_VAL 0x00000080
#define WL_KM_INFO_VAL 0x00000100
/* number of bytes needed to define a proper bit mask for MAC event reporting */
#define BCMIO_ROUNDUP(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define BCMIO_NBBY 8
#define WL_EVENTING_MASK_LEN 16 /* Don't increase this without wl review */
#define WL_EVENTING_MASK_EXT_LEN ROUNDUP(WLC_E_LAST, NBBY)/NBBY
/* join preference types */
#define WL_JOIN_PREF_RSSI 1u /* by RSSI */
#define WL_JOIN_PREF_WPA 2u /* by akm and ciphers */
#define WL_JOIN_PREF_BAND 3u /* by 802.11 band */
#define WL_JOIN_PREF_RSSI_DELTA 4u /* by 802.11 band only if RSSI
* delta condition matches
*/
#define WL_JOIN_PREF_TRANS_PREF 5u /* defined by requesting AP */
#define WL_JOIN_PREF_RSN_PRIO 6u /* by RSNE/RSNXE related
* security priority
*/
#define WL_JOIN_PREF_RSSI_PER_BAND 7u /* RSSI boost value per band */
#define WL_JOIN_PREF_SKIP_PSC 8u /* Used to set flag to filter
* PSC channel scan
*/
#define WL_JOIN_PREF_6G_DISABLE 9u /* Used to disable join/roam
* 6G BSS target
*/
#define WL_JOIN_PREF_ML_LINK_RSSI_BOOST 10u /* Used to configure boost
* for MLO targets
*/
#define WL_JOIN_PREF_ML_SUB_LINK_WEIGHTAGE 11u /* Percent weightage for
* subsidary link
*/
/* Join preference 6G disable Flag definition */
#define WL_JP_6G_DISABLE_ROAM (1u << 0u) /* Used to set flag to disable join/roam to
6G BSS target
*/
/* Join preference skip PSC Flag definition */
#define WL_JP_SKIP_PSC_ROAM (1u << 0u) /* Used to set flag to filter PSC channel
during full band roam scan
*/
/* Join preference RSN priority */
#define WL_JP_RSN_SAE_PK 1u /* SAE-PK higher priority over non SAE-PK APs */
/* band preference */
#define WLJP_BAND_ASSOC_PREF 255 /* use what WLC_SET_ASSOC_PREFER ioctl specifies */
/* any multicast cipher suite */
#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
/* 802.11h measurement types */
#define WLC_MEASURE_TPC 1
#define WLC_MEASURE_CHANNEL_BASIC 2
#define WLC_MEASURE_CHANNEL_CCA 3
#define WLC_MEASURE_CHANNEL_RPI 4
/* regulatory enforcement levels */
#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */
#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */
#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */
#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */
/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
* adoption is done regardless of capability spectrum_management
*/
#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */
/* bit position in per_chan_info; these depend on current country/regulatory domain */
#define WL_CHAN_VALID_HW (1u << 0) /* valid with current HW */
#define WL_CHAN_VALID_SW (1u << 1) /* valid with current country setting */
#define WL_CHAN_BAND_5G (1u << 2) /* 5GHz-band channel */
#define WL_CHAN_RADAR (1u << 3) /* radar sensitive channel */
#define WL_CHAN_INACTIVE (1u << 4) /* temporarily inactive due to radar */
#define WL_CHAN_PASSIVE (1u << 5) /* channel is in passive mode */
#define WL_CHAN_RESTRICTED (1u << 6) /* restricted use channel */
#define WL_CHAN_RADAR_EU_WEATHER (1u << 7) /* EU Radar weather channel.
* Implies an EU Radar channel.
*/
#define WL_CHAN_CLM_RESTRICTED (1u << 8) /* channel restricted in CLM (i.e. by default) */
#define WL_CHAN_BAND_6G (1u << 9) /* 6GHz-band channel */
#define WL_CHAN_BAND_6G_VLP (1u << 10u) /* 6GHz VLP channel */
#define WL_CHAN_BAND_6G_PSC (1u << 11u) /* 6GHz PSC channel */
#define WL_CHAN_BAND_6G_LPI (1u << 12u) /* 6GHz LPI channel */
#define WL_CHAN_BAND_6G_SP (1u << 13u) /* 6GHz SP channel */
#define WL_CHAN_INDOOR_ONLY (1u << 14u) /* indoor only channel */
#define WL_CHAN_P2P_PROHIBITED (1u << 15u) /* p2p restricted channel */
#define WL_CHAN_OOS_SHIFT 24u /* shift for OOS field */
#define WL_CHAN_OOS_MASK 0xFF000000u /* field specifying minutes remaining for this
* channel's out-of-service period due to radar
* detection
*/
/* BTC mode used by "btc_mode" iovar */
#define WL_BTC_DISABLE 0 /* disable BT coexistence */
#define WL_BTC_FULLTDM 1 /* full TDM COEX */
#define WL_BTC_ENABLE 1 /* full TDM COEX to maintain backward compatiblity */
#define WL_BTC_PREMPT 2 /* full TDM COEX with preemption */
#define WL_BTC_LITE 3 /* light weight coex for large isolation platform */
#define WL_BTC_PARALLEL 4 /* BT and WLAN run in parallel with separate antenna */
#define WL_BTC_HYBRID 5 /* hybrid coex, only ack allowed to transmit in BT slot */
#define WL_BTC_HYBRID_WLTX 6 /* hybrid coex HPP mode w WL data Tx during BT grant */
#define WL_BTC_DEFAULT 8 /* set the default mode for the device */
#define WL_INF_BTC_DISABLE 0
#define WL_INF_BTC_ENABLE 1
#define WL_INF_BTC_AUTO 3
#define WL_BTC_MODE_IOV_2G_MASK 0xFFu
#define WL_BTC_MODE_IOV_5G_MASK 0xFF00u
#define WL_BTC_MODE_IOV_5G_SHIFT 0x8u
/* BTC wire used by "btc_wire" iovar */
#define WL_BTC_DEFWIRE 0 /* use default wire setting */
#define WL_BTC_2WIRE 2 /* use 2-wire BTC */
#define WL_BTC_3WIRE 3 /* use 3-wire BTC */
#define WL_BTC_4WIRE 4 /* use 4-wire BTC */
/* BTC flags: BTC configuration that can be set by host */
#define WL_BTC_FLAG_PREMPT (1 << 0)
#define WL_BTC_FLAG_BT_DEF (1 << 1)
#define WL_BTC_FLAG_ACTIVE_PROT (1 << 2)
#define WL_BTC_FLAG_SIM_RSP (1 << 3)
#define WL_BTC_FLAG_PS_PROTECT (1 << 4)
#define WL_BTC_FLAG_SIM_TX_LP (1 << 5)
#define WL_BTC_FLAG_ECI (1 << 6)
#define WL_BTC_FLAG_LIGHT (1 << 7)
#define WL_BTC_FLAG_PARALLEL (1 << 8)
#define WL_BTC_FLAG_MAC_SUSP_GRANT_DENY (1 << 9)
/* maximum channels returned by the get valid channels iovar */
#define WL_NUMCHANNELS 64
/* This constant is obsolete, not part of ioctl/iovar interface and should never be used
* It is preserved only for compatibility with older branches that use it
*/
#ifdef WL_BAND6G
#ifdef WL_BAND5P9G
#ifdef WL11AC_80P80
#define WL_NUMCHANSPECS 466
#else
#define WL_NUMCHANSPECS 370
#endif
#else
#ifdef WL11AC_80P80
#define WL_NUMCHANSPECS 446
#else
#define WL_NUMCHANSPECS 350
#endif
#endif /* WL_BAND5P9G */
#else
#if defined(WL11AC_80P80)
#define WL_NUMCHANSPECS 206
#elif defined(WL_BW160MHZ)
#define WL_NUMCHANSPECS 140
#else
#define WL_NUMCHANSPECS 110
#endif
#endif /* WL_BAND6G */
/* WDS link local endpoint WPA role */
#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
/* Base offset values */
#define WL_PKT_FILTER_BASE_PKT 0
#define WL_PKT_FILTER_BASE_END 1
#define WL_PKT_FILTER_BASE_D11_H 2 /* May be removed */
#define WL_PKT_FILTER_BASE_D11_D 3 /* May be removed */
#define WL_PKT_FILTER_BASE_ETH_H 4
#define WL_PKT_FILTER_BASE_ETH_D 5
#define WL_PKT_FILTER_BASE_ARP_H 6
#define WL_PKT_FILTER_BASE_ARP_D 7 /* May be removed */
#define WL_PKT_FILTER_BASE_IP4_H 8
#define WL_PKT_FILTER_BASE_IP4_D 9
#define WL_PKT_FILTER_BASE_IP6_H 10
#define WL_PKT_FILTER_BASE_IP6_D 11
#define WL_PKT_FILTER_BASE_TCP_H 12
#define WL_PKT_FILTER_BASE_TCP_D 13 /* May be removed */
#define WL_PKT_FILTER_BASE_UDP_H 14
#define WL_PKT_FILTER_BASE_UDP_D 15
#define WL_PKT_FILTER_BASE_IP6_P 16
#define WL_PKT_FILTER_BASE_COUNT 17 /* May be removed */
/* String mapping for bases that may be used by applications or debug */
#define WL_PKT_FILTER_BASE_NAMES \
{ "START", WL_PKT_FILTER_BASE_PKT }, \
{ "END", WL_PKT_FILTER_BASE_END }, \
{ "ETH_H", WL_PKT_FILTER_BASE_ETH_H }, \
{ "ETH_D", WL_PKT_FILTER_BASE_ETH_D }, \
{ "D11_H", WL_PKT_FILTER_BASE_D11_H }, \
{ "D11_D", WL_PKT_FILTER_BASE_D11_D }, \
{ "ARP_H", WL_PKT_FILTER_BASE_ARP_H }, \
{ "IP4_H", WL_PKT_FILTER_BASE_IP4_H }, \
{ "IP4_D", WL_PKT_FILTER_BASE_IP4_D }, \
{ "IP6_H", WL_PKT_FILTER_BASE_IP6_H }, \
{ "IP6_D", WL_PKT_FILTER_BASE_IP6_D }, \
{ "IP6_P", WL_PKT_FILTER_BASE_IP6_P }, \
{ "TCP_H", WL_PKT_FILTER_BASE_TCP_H }, \
{ "TCP_D", WL_PKT_FILTER_BASE_TCP_D }, \
{ "UDP_H", WL_PKT_FILTER_BASE_UDP_H }, \
{ "UDP_D", WL_PKT_FILTER_BASE_UDP_D }
/* Flags for a pattern list element */
#define WL_PKT_FILTER_MFLAG_NEG 0x0001
/*
* Packet engine interface
*/
#define WL_PKTENG_PER_TX_START 0x01
#define WL_PKTENG_PER_TX_STOP 0x02
#define WL_PKTENG_PER_RX_START 0x04
#define WL_PKTENG_PER_RX_WITH_ACK_START 0x05
#define WL_PKTENG_PER_TX_WITH_ACK_START 0x06
#define WL_PKTENG_PER_RX_STOP 0x08
#define WL_PKTENG_PER_RU_TX_START 0x09
#define WL_PKTENG_PER_TRIG_TX_START 0x0a
#define WL_PKTENG_PER_MASK 0xff
#define WL_PKTENG_SYNCHRONOUS 0x100 /* synchronous flag */
#define WL_PKTENG_SYNCHRONOUS_UNBLK 0x200 /* synchronous unblock flag */
#define WL_PKTENG_COLLECT 0x400 /* Save last Rx'ed packet */
#ifdef PKTENG_LONGPKTSZ
/* max pktsz limit for pkteng */
#define WL_PKTENG_MAXPKTSZ PKTENG_LONGPKTSZ
#else
#define WL_PKTENG_MAXPKTSZ 16384
#endif
#define NUM_80211b_RATES 4
#define NUM_80211ag_RATES 8
#define NUM_80211n_RATES 32
#define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES)
/*
* WOWL capability/override settings
*/
#define WL_WOWL_MAGIC (1 << 0) /* Wakeup on Magic packet */
#define WL_WOWL_NET (1 << 1) /* Wakeup on Netpattern */
#define WL_WOWL_DIS (1 << 2) /* Wakeup on loss-of-link due to Disassoc/Deauth */
#define WL_WOWL_RETR (1 << 3) /* Wakeup on retrograde TSF */
#define WL_WOWL_BCN (1 << 4) /* Wakeup on loss of beacon */
#define WL_WOWL_TST (1 << 5) /* Wakeup after test */
#define WL_WOWL_M1 (1 << 6) /* Wakeup after PTK refresh */
#define WL_WOWL_EAPID (1 << 7) /* Wakeup after receipt of EAP-Identity Req */
#define WL_WOWL_PME_GPIO (1 << 8) /* Wakeind via PME(0) or GPIO(1) */
#define WL_WOWL_ULP_BAILOUT (1 << 8) /* wakeind via unknown pkt by basic ULP-offloads -
* WL_WOWL_ULP_BAILOUT - same as WL_WOWL_PME_GPIO used only for DONGLE BUILDS
*/
#define WL_WOWL_NEEDTKIP1 (1 << 9) /* need tkip phase 1 key to be updated by the driver */
#define WL_WOWL_GTK_FAILURE (1 << 10) /* enable wakeup if GTK fails */
#define WL_WOWL_EXTMAGPAT (1 << 11) /* support extended magic packets */
#define WL_WOWL_ARPOFFLOAD (1 << 12) /* support ARP/NS/keepalive offloading */
#define WL_WOWL_WPA2 (1 << 13) /* read protocol version for EAPOL frames */
#define WL_WOWL_KEYROT (1 << 14) /* If the bit is set, use key rotaton */
#define WL_WOWL_BCAST (1 << 15) /* If the bit is set, frm received was bcast frame */
#define WL_WOWL_SCANOL (1 << 16) /* If the bit is set, scan offload is enabled */
#define WL_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on tcpkeep alive timeout */
#define WL_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Conflict Resolution */
#define WL_WOWL_MDNS_SERVICE (1 << 19) /* Wakeup on mDNS Service Connect */
#define WL_WOWL_TCPKEEP_DATA (1 << 20) /* tcp keepalive got data */
#define WL_WOWL_FW_HALT (1 << 21) /* Firmware died in wowl mode */
#define WL_WOWL_ENAB_HWRADIO (1 << 22) /* Enable detection of radio button changes */
#define WL_WOWL_MIC_FAIL (1 << 23) /* Offloads detected MIC failure(s) */
#define WL_WOWL_UNASSOC (1 << 24) /* Wakeup in Unassociated state (Net/Magic Pattern) */
#define WL_WOWL_SECURE (1 << 25) /* Wakeup if received matched secured pattern */
#define WL_WOWL_EXCESS_WAKE (1 << 26) /* Excess wake */
#define WL_WOWL_LINKDOWN (1 << 31) /* Link Down indication in WoWL mode */
#define WL_WOWL_TCPKEEP (1 << 20) /* temp copy to satisfy automerger */
#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
#define WOWL_PATTEN_TYPE_ARP (1 << 0) /* ARP offload Pattern */
#define WOWL_PATTEN_TYPE_NA (1 << 1) /* NA offload Pattern */
#define MAGIC_PKT_MINLEN 102 /* Magic pkt min length is 6 * 0xFF + 16 * ETHER_ADDR_LEN */
#define MAGIC_PKT_NUM_MAC_ADDRS 16
/* Overlap BSS Scan parameters default, minimum, maximum */
#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 20 /* unit TU */
#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5 /* unit TU */
#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 10 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000 /* unit TU */
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300 /* unit Sec */
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10 /* unit Sec */
#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900 /* unit Sec */
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5
#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200 /* unit TU */
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200 /* unit TU */
#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000 /* unit TU */
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25 /* unit percent */
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0 /* unit percent */
#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100 /* unit percent */
#define WL_MIN_NUM_OBSS_SCAN_ARG 7 /* minimum number of arguments required for OBSS Scan */
#define WL_COEX_INFO_MASK 0x07
#define WL_COEX_INFO_REQ 0x01
#define WL_COEX_40MHZ_INTOLERANT 0x02
#define WL_COEX_WIDTH20 0x04
#define WLC_RSSI_INVALID 0 /* invalid RSSI value */
#define MAX_RSSI_LEVELS 8
#define MAX_ARGSTR_LEN 18 /* At least big enough for storing ETHER_ADDR_STR_LEN */
/* log modules (bitmap) */
#define LOG_MODULE_COMMON 0x0001
#define LOG_MODULE_ASSOC 0x0002
#define LOG_MODULE_EVENT 0x0004
#define LOG_MODULE_MAX 3 /* Update when adding module */
/* log levels */
#define WL_LOG_LEVEL_DISABLE 0
#define WL_LOG_LEVEL_ERR 1
#define WL_LOG_LEVEL_WARN 2
#define WL_LOG_LEVEL_INFO 3
#define WL_LOG_LEVEL_MAX WL_LOG_LEVEL_INFO /* Update when adding level */
/* flag */
#define LOG_FLAG_EVENT 1
/* log arg_type */
#define LOG_ARGTYPE_NULL 0
#define LOG_ARGTYPE_STR 1 /* %s */
#define LOG_ARGTYPE_INT 2 /* %d */
#define LOG_ARGTYPE_INT_STR 3 /* %d...%s */
#define LOG_ARGTYPE_STR_INT 4 /* %s...%d */
/* 802.11 Mgmt Packet flags */
#define VNDR_IE_BEACON_FLAG 0x1
#define VNDR_IE_PRBRSP_FLAG 0x2
#define VNDR_IE_ASSOCRSP_FLAG 0x4
#define VNDR_IE_AUTHRSP_FLAG 0x8
#define VNDR_IE_PRBREQ_FLAG 0x10
#define VNDR_IE_ASSOCREQ_FLAG 0x20
#define VNDR_IE_IWAPID_FLAG 0x40 /* vendor IE in IW advertisement protocol ID field */
#define VNDR_IE_AUTHREQ_FLAG 0x80
#define VNDR_IE_CUSTOM_FLAG 0x100 /* allow custom IE id */
#define VNDR_IE_DISASSOC_FLAG 0x200
#if defined(WLP2P)
/* P2P Action Frames flags (spec ordered) */
#define VNDR_IE_GONREQ_FLAG 0x001000
#define VNDR_IE_GONRSP_FLAG 0x002000
#define VNDR_IE_GONCFM_FLAG 0x004000
#define VNDR_IE_INVREQ_FLAG 0x008000
#define VNDR_IE_INVRSP_FLAG 0x010000
#define VNDR_IE_DISREQ_FLAG 0x020000
#define VNDR_IE_DISRSP_FLAG 0x040000
#define VNDR_IE_PRDREQ_FLAG 0x080000
#define VNDR_IE_PRDRSP_FLAG 0x100000
#define VNDR_IE_P2PAF_SHIFT 12
#endif /* WLP2P */
/* channel interference measurement (chanim) related defines */
/* chanim mode */
#define CHANIM_DISABLE 0 /* disabled */
#define CHANIM_DETECT 1 /* detection only */
#define CHANIM_EXT 2 /* external state machine */
#define CHANIM_ACT 3 /* full internal state machine, detect + act */
#define CHANIM_MODE_MAX 4
/* define for apcs reason code */
#define APCS_INIT 0
#define APCS_IOCTL 1
#define APCS_CHANIM 2
#define APCS_CSTIMER 3
#define APCS_TXDLY 5
#define APCS_NONACSD 6
#define APCS_DFS_REENTRY 7
#define APCS_TXFAIL 8
#define APCS_MAX 9
/* number of ACS record entries */
#define CHANIM_ACS_RECORD 10
/* CHANIM */
#define CCASTATS_TXDUR 0
#define CCASTATS_INBSS 1
#define CCASTATS_OBSS 2
#define CCASTATS_NOCTG 3
#define CCASTATS_NOPKT 4
#define CCASTATS_DOZE 5
#define CCASTATS_TXOP 6
#define CCASTATS_GDTXDUR 7
#define CCASTATS_BDTXDUR 8
/* FIXME: CCASTATS_MAX is 9 for existing chips and 10 for new ones.
* This is to avoid rom invalidation of existing chips.
*/
#ifndef WLCHANIM_V2
#define CCASTATS_MAX 9
#else /* WLCHANIM_V2 */
#define CCASTATS_MYRX 9
#define CCASTATS_MAX 10
#endif /* WLCHANIM_V2 */
#define WL_CHANIM_COUNT_ALL 0xff
#define WL_CHANIM_COUNT_ONE 0x1
/* flags used in scandb, indicates bss attributes of interest */
#define WLC_SCANDB_CACHE_FLAG_NONE (0u) /* None */
#define WLC_SCANDB_CACHE_FLAG_HT_CAP (1u << 0u) /* HT capable */
#define WLC_SCANDB_CACHE_FLAG_VHT_CAP (1u << 1u) /* VHT capable */
#define WLC_SCANDB_CACHE_FLAG_HE_CAP (1u << 2u) /* HE capable */
#define WLC_SCANDB_CACHE_FLAG_EHT_CAP (1u << 3u) /* EHT capable */
#define WLC_SCANDB_CACHE_FLAG_FTM_RESP (1u << 4u) /* FTM responder */
/* Module id: to know which module has sent the stats */
#define SC_CHANIM_ID_NULL 0u
#define SC_CHANIM_ID_SCAN 1u /* Module Id of scan, used to report scqs */
#define SC_CHANIM_ID_STA 2u /* Module Id of STA, used tp report scqs */
/* ap tpc modes */
#define AP_TPC_OFF 0
#define AP_TPC_BSS_PWR 1 /* BSS power control */
#define AP_TPC_AP_PWR 2 /* AP power control */
#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */
#define AP_TPC_MAX_LINK_MARGIN 127
/* ap tpc modes */
#define AP_TPC_OFF 0
#define AP_TPC_BSS_PWR 1 /* BSS power control */
#define AP_TPC_AP_PWR 2 /* AP power control */
#define AP_TPC_AP_BSS_PWR 3 /* Both AP and BSS power control */
#define AP_TPC_MAX_LINK_MARGIN 127
/* tpc option bits */
#define TPC_OPT_NO_11DH_TXPWR 1 /* Do not adopt 11d+11h AP power constraints when
* autocountry is 0
*/
/* state */
#define WL_P2P_DISC_ST_SCAN 0
#define WL_P2P_DISC_ST_LISTEN 1
#define WL_P2P_DISC_ST_SEARCH 2
/* i/f type */
#define WL_P2P_IF_CLIENT 0
#define WL_P2P_IF_GO 1
#define WL_P2P_IF_DYNBCN_GO 2
#define WL_P2P_IF_DEV 3
/* p2p GO configuration */
#define WL_P2P_ENABLE_CONF 1 /* configure */
#define WL_P2P_DISABLE_CONF 0 /* un-configure */
/* count */
#define WL_P2P_SCHED_RSVD 0
#define WL_P2P_SCHED_REPEAT 255 /* anything > 255 will be treated as 255 */
#define WL_P2P_SCHED_FIXED_LEN 3
/* schedule type */
#define WL_P2P_SCHED_TYPE_ABS 0 /* Scheduled Absence */
#define WL_P2P_SCHED_TYPE_REQ_ABS 1 /* Requested Absence */
/* at some point we may need bitvec here (combination of actions) */
/* schedule action during absence periods (for WL_P2P_SCHED_ABS type) */
#define WL_P2P_SCHED_ACTION_NONE 0 /* no action */
#define WL_P2P_SCHED_ACTION_DOZE 1 /* doze */
/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
#define WL_P2P_SCHED_ACTION_GOOFF 2 /* turn off GO beacon/prbrsp functions */
/* schedule option - WL_P2P_SCHED_TYPE_XXX */
#define WL_P2P_SCHED_ACTION_RESET 255 /* reset */
/* at some point we may need bitvec here (combination of options) */
/* schedule option - WL_P2P_SCHED_TYPE_ABS */
#define WL_P2P_SCHED_OPTION_NORMAL 0 /* normal start/interval/duration/count */
#define WL_P2P_SCHED_OPTION_BCNPCT 1 /* percentage of beacon interval */
/* schedule option - WL_P2P_SCHED_TYPE_REQ_ABS */
#define WL_P2P_SCHED_OPTION_TSFOFS 2 /* normal start/internal/duration/count with
* start being an offset of the 'current' TSF
*/
/* feature flags */
#define WL_P2P_FEAT_GO_CSA (1 << 0) /* GO moves with the STA using CSA method */
#define WL_P2P_FEAT_GO_NOLEGACY (1 << 1) /* GO does not probe respond to non-p2p probe
* requests
*/
#define WL_P2P_FEAT_RESTRICT_DEV_RESP (1 << 2) /* Restrict p2p dev interface from responding */
/* n-mode support capability */
/* 2x2 includes both 1x1 & 2x2 devices
* reserved #define 2 for future when we want to separate 1x1 & 2x2 and
* control it independently
*/
#define WL_11N_2x2 1
#define WL_11N_3x3 3
#define WL_11N_4x4 4
/* define 11n feature disable flags */
#define WLFEATURE_DISABLE_11N 0x00000001
#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002
#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004
#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008
#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010
#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020
#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040
#define WLFEATURE_DISABLE_11N_GF 0x00000080
/* op code in nat_cfg */
#define NAT_OP_ENABLE 1 /* enable NAT on given interface */
#define NAT_OP_DISABLE 2 /* disable NAT on given interface */
#define NAT_OP_DISABLE_ALL 3 /* disable NAT on all interfaces */
/* NAT state */
#define NAT_STATE_ENABLED 1 /* NAT is enabled */
#define NAT_STATE_DISABLED 2 /* NAT is disabled */
#define CHANNEL_5G_LOW_START 36 /* 5G low (36..48) CDD enable/disable bit mask */
#define CHANNEL_5G_MID_START 52 /* 5G mid (52..64) CDD enable/disable bit mask */
#define CHANNEL_5G_HIGH_START 100 /* 5G high (100..140) CDD enable/disable bit mask */
#define CHANNEL_5G_UPPER_START 149 /* 5G upper (149..161) CDD enable/disable bit mask */
/* D0 Coalescing */
#define IPV4_ARP_FILTER 0x0001
#define IPV4_NETBT_FILTER 0x0002
#define IPV4_LLMNR_FILTER 0x0004
#define IPV4_SSDP_FILTER 0x0008
#define IPV4_WSD_FILTER 0x0010
#define IPV6_NETBT_FILTER 0x0200
#define IPV6_LLMNR_FILTER 0x0400
#define IPV6_SSDP_FILTER 0x0800
#define IPV6_WSD_FILTER 0x1000
/* Network Offload Engine */
#define NWOE_OL_ENABLE 0x00000001
/*
* Traffic management structures/defines.
*/
/* Traffic management bandwidth parameters */
#define TRF_MGMT_MAX_PRIORITIES 3
#define TRF_MGMT_FLAG_ADD_DSCP 0x0001 /* Add DSCP to IP TOS field */
#define TRF_MGMT_FLAG_DISABLE_SHAPING 0x0002 /* Don't shape traffic */
#define TRF_MGMT_FLAG_MANAGE_LOCAL_TRAFFIC 0x0008 /* Manage traffic over our local subnet */
#define TRF_MGMT_FLAG_FILTER_ON_MACADDR 0x0010 /* filter on MAC address */
#define TRF_MGMT_FLAG_NO_RX 0x0020 /* do not apply fiters to rx packets */
#define TRF_FILTER_MAC_ADDR 0x0001 /* L2 filter use dst mac address for filtering */
#define TRF_FILTER_IP_ADDR 0x0002 /* L3 filter use ip ddress for filtering */
#define TRF_FILTER_L4 0x0004 /* L4 filter use tcp/udp for filtering */
#define TRF_FILTER_DWM 0x0008 /* L3 filter use DSCP for filtering */
#define TRF_FILTER_FAVORED 0x0010 /* Tag the packet FAVORED */
/* WNM/NPS subfeatures mask */
#define WL_WNM_BSSTRANS 0x00000001
#define WL_WNM_PROXYARP 0x00000002
#define WL_WNM_MAXIDLE 0x00000004
#define WL_WNM_TIMBC 0x00000008
#define WL_WNM_TFS 0x00000010
#define WL_WNM_SLEEP 0x00000020
#define WL_WNM_DMS 0x00000040
#define WL_WNM_FMS 0x00000080
#define WL_WNM_NOTIF 0x00000100
#define WL_WNM_WBTEXT 0x00000200
#define WL_WNM_ESTM 0x00000400
#define WL_WNM_MAX 0x00000800
#ifdef WLWNM_BRCM
#define BRCM_WNM_FEATURE_SET\
(WL_WNM_PROXYARP | \
WL_WNM_SLEEP | \
WL_WNM_FMS | \
WL_WNM_TFS | \
WL_WNM_TIMBC | \
WL_WNM_BSSTRANS | \
WL_WNM_DMS | \
WL_WNM_NOTIF | \
0)
#endif /* WLWNM_BRCM */
#ifndef ETHER_MAX_DATA
#define ETHER_MAX_DATA 1500
#endif /* ETHER_MAX_DATA */
/* Different discovery modes for dpt */
#define DPT_DISCOVERY_MANUAL 0x01 /* manual discovery mode */
#define DPT_DISCOVERY_AUTO 0x02 /* auto discovery mode */
#define DPT_DISCOVERY_SCAN 0x04 /* scan-based discovery mode */
/* different path selection values */
#define DPT_PATHSEL_AUTO 0 /* auto mode for path selection */
#define DPT_PATHSEL_DIRECT 1 /* always use direct DPT path */
#define DPT_PATHSEL_APPATH 2 /* always use AP path */
/* different ops for deny list */
#define DPT_DENY_LIST_ADD 1 /* add to dpt deny list */
#define DPT_DENY_LIST_REMOVE 2 /* remove from dpt deny list */
/* different ops for manual end point */
#define DPT_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */
#define DPT_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */
#define DPT_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */
/* flags to indicate DPT status */
#define DPT_STATUS_ACTIVE 0x01 /* link active (though may be suspended) */
#define DPT_STATUS_AES 0x02 /* link secured through AES encryption */
#define DPT_STATUS_FAILED 0x04 /* DPT link failed */
#ifdef WLTDLS
/* different ops for manual end point */
#define TDLS_MANUAL_EP_CREATE 1 /* create manual dpt endpoint */
#define TDLS_MANUAL_EP_MODIFY 2 /* modify manual dpt endpoint */
#define TDLS_MANUAL_EP_DELETE 3 /* delete manual dpt endpoint */
#define TDLS_MANUAL_EP_PM 4 /* put dpt endpoint in PM mode */
#define TDLS_MANUAL_EP_WAKE 5 /* wake up dpt endpoint from PM */
#define TDLS_MANUAL_EP_DISCOVERY 6 /* discover if endpoint is TDLS capable */
#define TDLS_MANUAL_EP_CHSW 7 /* channel switch */
#define TDLS_MANUAL_EP_WFD_TPQ 8 /* WiFi-Display Tunneled Probe reQuest */
/* modes */
#define TDLS_WFD_IE_TX 0
#define TDLS_WFD_IE_RX 1
#define TDLS_WFD_PROBE_IE_TX 2
#define TDLS_WFD_PROBE_IE_RX 3
#endif /* WLTDLS */
/* define for flag */
#define TSPEC_PENDING 0 /* TSPEC pending */
#define TSPEC_ACCEPTED 1 /* TSPEC accepted */
#define TSPEC_REJECTED 2 /* TSPEC rejected */
#define TSPEC_UNKNOWN 3 /* TSPEC unknown */
#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */
#ifdef BCMCCX
/* "wlan_reason" iovar interface */
#define WL_WLAN_ASSOC_REASON_NORMAL_NETWORK 0 /* normal WLAN network setup */
#define WL_WLAN_ASSOC_REASON_ROAM_FROM_CELLULAR_NETWORK 1 /* roam from Cellular network */
#define WL_WLAN_ASSOC_REASON_ROAM_FROM_LAN 2 /* roam from LAN */
#define WL_WLAN_ASSOC_REASON_MAX 2 /* largest value allowed */
#endif /* BCMCCX */
/* Software feature flag defines used by wlfeatureflag */
#ifdef WLAFTERBURNER
#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */
#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */
#endif /* WLAFTERBURNER */
#define WL_SWFL_NOHWRADIO 0x0004 /* Disable HW Radio monitor (e.g., Cust Spec) */
#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */
#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */
#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
#define CSA_BROADCAST_ACTION_FRAME 0 /* csa broadcast action frame */
#define CSA_UNICAST_ACTION_FRAME 1 /* csa unicast action frame */
/* Roaming trigger definitions for WLC_SET_ROAM_TRIGGER.
*
* (-100 < value < 0) value is used directly as a roaming trigger in dBm
* (0 <= value) value specifies a logical roaming trigger level from
* the list below
*
* WLC_GET_ROAM_TRIGGER always returns roaming trigger value in dBm, never
* the logical roam trigger value.
*/
#define WLC_ROAM_TRIGGER_DEFAULT 0 /* default roaming trigger */
#define WLC_ROAM_TRIGGER_BANDWIDTH 1 /* optimize for bandwidth roaming trigger */
#define WLC_ROAM_TRIGGER_DISTANCE 2 /* optimize for distance roaming trigger */
#define WLC_ROAM_TRIGGER_AUTO 3 /* auto-detect environment */
#define WLC_ROAM_TRIGGER_MAX_VALUE 3 /* max. valid value */
#define WLC_ROAM_NEVER_ROAM_TRIGGER (-100) /* Avoid Roaming by setting a large value */
/* Preferred Network Offload (PNO, formerly PFN) defines */
#define WPA_AUTH_PFN_ANY 0xffffffff /* for PFN, match only ssid */
#define SORT_CRITERIA_BIT 0
#define AUTO_NET_SWITCH_BIT 1
#define ENABLE_BKGRD_SCAN_BIT 2
#define IMMEDIATE_SCAN_BIT 3
#define AUTO_CONNECT_BIT 4
#define ENABLE_BD_SCAN_BIT 5
#define ENABLE_ADAPTSCAN_BIT 6
#define IMMEDIATE_EVENT_BIT 8
#define SUPPRESS_SSID_BIT 9
#define ENABLE_NET_OFFLOAD_BIT 10
/* report found/lost events for SSID and BSSID networks seperately */
#define REPORT_SEPERATELY_BIT 11
#define BESTN_BSSID_ONLY_BIT 12
#define BESTN_BSSID_ASSOC_BIT 13
#define SORT_CRITERIA_MASK 0x0001
#define AUTO_NET_SWITCH_MASK 0x0002
#define ENABLE_BKGRD_SCAN_MASK 0x0004
#define IMMEDIATE_SCAN_MASK 0x0008
#define AUTO_CONNECT_MASK 0x0010
#define ENABLE_BD_SCAN_MASK 0x0020
#define ENABLE_ADAPTSCAN_MASK 0x00c0
#define IMMEDIATE_EVENT_MASK 0x0100
#define SUPPRESS_SSID_MASK 0x0200
#define ENABLE_NET_OFFLOAD_MASK 0x0400
/* report found/lost events for SSID and BSSID networks seperately */
#define REPORT_SEPARATELY_MASK 0x0800
#define REPORT_SEPERATELY_MASK REPORT_SEPARATELY_MASK // Legacy typo
#define BESTN_BSSID_ONLY_MASK 0x1000
#define BESTN_BSSID_ASSOC_MASK 0x2000
#ifdef PFN_SCANRESULT_2
#define PFN_SCANRESULT_VERSION 2
#else
#define PFN_SCANRESULT_VERSION 1
#endif /* PFN_SCANRESULT_2 */
#ifndef MAX_PFN_LIST_COUNT
#define MAX_PFN_LIST_COUNT 64
#endif /* MAX_PFN_LIST_COUNT */
#define PFN_COMPLETE 1
#define PFN_INCOMPLETE 0
#define DEFAULT_BESTN 2
#define DEFAULT_MSCAN 0
#define DEFAULT_REPEAT 10
#define DEFAULT_EXP 2
/* Results flags for pfn scan history */
#define PFN_PARTIAL_SCAN_BIT 0u
#define PFN_PARTIAL_SCAN_MASK 0x1u
#define PFN_ASSOCIATED_AP_BIT 1u
#define PFN_ASSOCIATED_AP_MASK 0x2u
#define WL_PFN_SUPPRESSFOUND_MASK 0x08
#define WL_PFN_SUPPRESSLOST_MASK 0x10
#define WL_PFN_SSID_A_BAND_TRIG 0x20
#define WL_PFN_SSID_BG_BAND_TRIG 0x40
#define WL_PFN_SSID_IMPRECISE_MATCH 0x80
#define WL_PFN_SSID_SAME_NETWORK 0x10000
#define WL_PFN_SUPPRESS_AGING_MASK 0x20000
#define WL_PFN_FLUSH_ALL_SSIDS 0x40000
#define WL_PFN_RSSI_MASK 0xff00
#define WL_PFN_RSSI_SHIFT 8
#define WL_PFN_REPORT_ALLNET 0
#define WL_PFN_REPORT_SSIDNET 1
#define WL_PFN_REPORT_BSSIDNET 2
#define WL_PFN_CFG_FLAGS_PROHIBITED 0x00000001 /* Accept and use prohibited channels */
#define WL_PFN_CFG_FLAGS_HISTORY_OFF 0x00000002 /* Scan history suppressed */
/* Set to avoid sending direct probe in 6G channels */
#define WL_PFN_CFG_FLAGS_NO_6GHZ_FOLLOWUP 0x00000004
#define WL_PFN_HIDDEN_BIT 2
#define PNO_SCAN_MAX_FW 508*1000 /* max time scan time in msec */
#define PNO_SCAN_MAX_FW_SEC PNO_SCAN_MAX_FW/1000 /* max time scan time in SEC */
#define PNO_SCAN_MIN_FW_SEC 10 /* min time scan time in SEC */
#define WL_PFN_HIDDEN_MASK 0x4
#define MAX_BSSID_PREF_LIST_NUM 32
#ifdef CUSTOM_SSID_WHITELIST_NUM
#define MAX_SSID_WHITELIST_NUM CUSTOM_SSID_WHITELIST_NUM
#else
#define MAX_SSID_WHITELIST_NUM 4
#endif /* CUSTOM_SSID_WHITELIST_NUM */
#ifdef CUSTOM_BSSID_BLACKLIST_NUM
#define MAX_BSSID_BLACKLIST_NUM CUSTOM_BSSID_BLACKLIST_NUM
#else
#define MAX_BSSID_BLACKLIST_NUM 32
#endif /* CUSTOM_BSSID_BLACKLIST_NUM */
/* TCP Checksum Offload error injection for testing */
#define TOE_ERRTEST_TX_CSUM 0x00000001
#define TOE_ERRTEST_RX_CSUM 0x00000002
#define TOE_ERRTEST_RX_CSUM2 0x00000004
/* ARP Offload feature flags for arp_ol iovar */
#define ARP_OL_AGENT 0x00000001 /* enable processing of rx ARP packets */
#define ARP_OL_SNOOP 0x00000002 /* populate using ARP pkts from host */
#define ARP_OL_HOST_AUTO_REPLY 0x00000004 /* reply to ARP request from host */
#define ARP_OL_PEER_AUTO_REPLY 0x00000008 /* reply to ARP request from peer */
#define ARP_OL_UPDATE_HOST_CACHE 0x00000010 /* forward new ARP request to host */
/* ARP Offload error injection */
#define ARP_ERRTEST_REPLY_PEER 0x1
#define ARP_ERRTEST_REPLY_HOST 0x2
#define ARP_MULTIHOMING_MAX 8 /* Maximum local host IP addresses */
#if defined(WL_PKT_FLTR_EXT) && !defined(WL_PKT_FLTR_EXT_DISABLED)
#define ND_MULTIHOMING_MAX 32 /* Maximum local host IP addresses */
#else
#define ND_MULTIHOMING_MAX 10 /* Maximum local host IP addresses */
#endif /* WL_PKT_FLTR_EXT && !WL_PKT_FLTR_EXT_DISABLED */
#define ND_REQUEST_MAX 5 /* Max set of offload params */
/* AOAC wake event flag */
#define WAKE_EVENT_NLO_DISCOVERY_BIT 1
#define WAKE_EVENT_AP_ASSOCIATION_LOST_BIT 2
#define WAKE_EVENT_GTK_HANDSHAKE_ERROR_BIT 4
#define WAKE_EVENT_4WAY_HANDSHAKE_REQUEST_BIT 8
#define WAKE_EVENT_NET_PACKET_BIT 0x10
#define MAX_NUM_WOL_PATTERN 22 /* LOGO requirements min 22 */
/* Packet filter operation mode */
/* True: 1; False: 0 */
#define PKT_FILTER_MODE_FORWARD_ON_MATCH 1
/* Enable and disable pkt_filter as a whole */
#define PKT_FILTER_MODE_DISABLE 2
/* Cache first matched rx pkt(be queried by host later) */
#define PKT_FILTER_MODE_PKT_CACHE_ON_MATCH 4
/* If pkt_filter is enabled and no filter is set, don't forward anything */
#define PKT_FILTER_MODE_PKT_FORWARD_OFF_DEFAULT 8
#ifdef DONGLEOVERLAYS
#define OVERLAY_IDX_MASK 0x000000ff
#define OVERLAY_IDX_SHIFT 0
#define OVERLAY_FLAGS_MASK 0xffffff00
#define OVERLAY_FLAGS_SHIFT 8
/* overlay written to device memory immediately after loading the base image */
#define OVERLAY_FLAG_POSTLOAD 0x100
/* defer overlay download until the device responds w/WLC_E_OVL_DOWNLOAD event */
#define OVERLAY_FLAG_DEFER_DL 0x200
/* overlay downloaded prior to the host going to sleep */
#define OVERLAY_FLAG_PRESLEEP 0x400
#define OVERLAY_DOWNLOAD_CHUNKSIZE 1024
#endif /* DONGLEOVERLAYS */
/* reuse two number in the sc/rc space */
#define SMFS_CODE_MALFORMED 0xFFFE
#define SMFS_CODE_IGNORED 0xFFFD
/* RFAWARE def */
#define BCM_ACTION_RFAWARE 0x77
#define BCM_ACTION_RFAWARE_DCS 0x01
/* DCS reason code define */
#define BCM_DCS_IOVAR 0x1
#define BCM_DCS_UNKNOWN 0xFF
#define WL_CHAN_CC_INDOOR_EXT (1u << 0u) /* policy to extend sta indoor chan to peer role */
#define WL_CHAN_CC_DFS_EXT (1u << 1u) /* policy to extend sta DFS chan to peer role */
#define WL_CHAN_CC_POLICY_MASK 0x3u /* supported chan concurrency policy mask */
#ifdef EXT_STA
#define IHV_OID_BCM 0x00181000 /* based on BRCM_OUI value */
/* ---------------------------------------------------------------------------
* Event codes
* ---------------------------------------------------------------------------
*/
#ifdef BCMCCX
#define IHV_CCX_EVENT_STATUS_INDICATION 0x00000001L /* from driver */
#define IHV_CCX_EVENT_PACKET_RECEIVED 0x00000002L /* from driver */
#define IHV_CCX_EVENT_PACKET_TRANSMITTED 0x00000003L /* from driver */
#define IHV_CCX_EVENT_OID 0x00000004L /* to driver */
#define IHV_CCX_EVENT_OK_TO_ASSOCIATE 0x00000005L /* to driver */
#define IHV_CCX_EVENT_SEND_PACKET 0x00000006L /* to driver */
#endif /* BCMCCX */
#define IHV_DRIVER_EVENT_GEN_INDICATION 0x00000011L /* from driver */
#endif /* EXT_STA */
#ifdef PROP_TXSTATUS
/* Bit definitions for tlv iovar */
/*
* enable RSSI signals:
* WLFC_CTL_TYPE_RSSI
*/
#define WLFC_FLAGS_RSSI_SIGNALS 0x0001
/* enable (if/mac_open, if/mac_close,, mac_add, mac_del) signals:
*
* WLFC_CTL_TYPE_MAC_OPEN
* WLFC_CTL_TYPE_MAC_CLOSE
*
* WLFC_CTL_TYPE_INTERFACE_OPEN
* WLFC_CTL_TYPE_INTERFACE_CLOSE
*
* WLFC_CTL_TYPE_MACDESC_ADD
* WLFC_CTL_TYPE_MACDESC_DEL
*
*/
#define WLFC_FLAGS_XONXOFF_SIGNALS 0x0002
/* enable (status, fifo_credit, mac_credit) signals
* WLFC_CTL_TYPE_MAC_REQUEST_CREDIT
* WLFC_CTL_TYPE_TXSTATUS
* WLFC_CTL_TYPE_FIFO_CREDITBACK
*/
#define WLFC_FLAGS_CREDIT_STATUS_SIGNALS 0x0004
#define WLFC_FLAGS_HOST_PROPTXSTATUS_ACTIVE 0x0008
#define WLFC_FLAGS_PSQ_GENERATIONFSM_ENABLE 0x0010
#define WLFC_FLAGS_PSQ_ZERO_BUFFER_ENABLE 0x0020
#define WLFC_FLAGS_HOST_RXRERODER_ACTIVE 0x0040
#define WLFC_FLAGS_PKT_STAMP_SIGNALS 0x0080
#endif /* PROP_TXSTATUS */
#define WL_TIMBC_STATUS_AP_UNKNOWN 255 /* AP status for internal use only */
#define WL_DFRTS_LOGIC_OFF 0 /* Feature is disabled */
#define WL_DFRTS_LOGIC_OR 1 /* OR all non-zero threshold conditions */
#define WL_DFRTS_LOGIC_AND 2 /* AND all non-zero threshold conditions */
/* Definitions for Reliable Multicast */
#define WL_RELMCAST_MAX_CLIENT 32
#define WL_RELMCAST_FLAG_INBLACKLIST 1
#define WL_RELMCAST_FLAG_ACTIVEACKER 2
#define WL_RELMCAST_FLAG_RELMCAST 4
/* structures for proximity detection device role */
#define WL_PROXD_MODE_DISABLE 0
#define WL_PROXD_MODE_NEUTRAL 1
#define WL_PROXD_MODE_INITIATOR 2
#define WL_PROXD_MODE_TARGET 3
#define WL_PROXD_RANDOM_WAKEUP 0x8000
#ifdef NET_DETECT
#define NET_DETECT_MAX_WAKE_DATA_SIZE 2048
#define NET_DETECT_MAX_PROFILES 16
#define NET_DETECT_MAX_CHANNELS 50
#endif /* NET_DETECT */
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
#define WL_RADIO_SW_DISABLE (1<<0)
#define WL_RADIO_HW_DISABLE (1<<1)
#define WL_RADIO_MPC_DISABLE (1<<2)
#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
#define WL_RADIO_PERCORE_DISABLE (1<<4) /* Radio diable per core for DVT */
#define WL_RADIO_TSYNC_PWRSAVE_DISABLE (1<<5) /* Disable Radio in tsync mode for power saving */
#define WL_SPURAVOID_OFF 0
#define WL_SPURAVOID_ON1 1
#define WL_SPURAVOID_ON2 2
#define WL_4335_SPURAVOID_ON1 1
#define WL_4335_SPURAVOID_ON2 2
#define WL_4335_SPURAVOID_ON3 3
#define WL_4335_SPURAVOID_ON4 4
#define WL_4335_SPURAVOID_ON5 5
#define WL_4335_SPURAVOID_ON6 6
#define WL_4335_SPURAVOID_ON7 7
#define WL_4335_SPURAVOID_ON8 8
#define WL_4335_SPURAVOID_ON9 9
/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
#define WL_TXPWR_OVERRIDE (1U<<31)
#define WL_TXPWR_NEG (1U<<28)
#define WL_TXPWR_DEV_CAT_MASK 0xC000000
#define WL_TXPWR_DEV_CAT_SHIFT (26u)
#define WL_TXPWR_DEV_CAT_MAX (3u) /* Max dev cat is SP */
/* phy types (returned by WLC_GET_PHYTPE) */
#define WLC_PHY_TYPE_A 0
#define WLC_PHY_TYPE_B 1
#define WLC_PHY_TYPE_G 2
#define WLC_PHY_TYPE_N 4
#define WLC_PHY_TYPE_LP 5
#define WLC_PHY_TYPE_SSN 6
#define WLC_PHY_TYPE_HT 7
#define WLC_PHY_TYPE_LCN 8
#define WLC_PHY_TYPE_LCN40 10
#define WLC_PHY_TYPE_AC 11
#define WLC_PHY_TYPE_LCN20 12
#define WLC_PHY_TYPE_NULL 0xf
/* Values for PM */
#define PM_OFF 0
#define PM_MAX 1
#define PM_FAST 2
#define PM_FORCE_OFF 3 /* use this bit to force PM off even bt is active */
#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */
/* fbt_cap: FBT assoc / reassoc modes. */
#define WLC_FBT_CAP_DRV_4WAY_AND_REASSOC 1 /* Driver 4-way handshake & reassoc (WLFBT). */
/* monitor_promisc_level bits */
#define WL_MONPROMISC_PROMISC 0x0001
#define WL_MONPROMISC_CTRL 0x0002
#define WL_MONPROMISC_FCS 0x0004
/* TCP Checksum Offload defines */
#define TOE_TX_CSUM_OL 0x00000001
#define TOE_RX_CSUM_OL 0x00000002
/* Wi-Fi Display Services (WFDS) */
#define WL_P2P_SOCIAL_CHANNELS_MAX WL_NUMCHANNELS
#define MAX_WFDS_SEEK_SVC 4 /* Max # of wfds services to seek */
#define MAX_WFDS_ADVERT_SVC 4 /* Max # of wfds services to advertise */
#define MAX_WFDS_SVC_NAME_LEN 200 /* maximum service_name length */
#define MAX_WFDS_ADV_SVC_INFO_LEN 65000 /* maximum adv service_info length */
#define P2P_WFDS_HASH_LEN 6 /* Length of a WFDS service hash */
#define MAX_WFDS_SEEK_SVC_INFO_LEN 255 /* maximum seek service_info req length */
#define MAX_WFDS_SEEK_SVC_NAME_LEN 200 /* maximum service_name length */
/* ap_isolate bitmaps */
#define AP_ISOLATE_DISABLED 0x0
#define AP_ISOLATE_SENDUP_ALL 0x01
#define AP_ISOLATE_SENDUP_MCAST 0x02
/* Type values for the wl_pwrstats_t data field */
#define WL_PWRSTATS_TYPE_PHY 0 /**< struct wl_pwr_phy_stats */
#define WL_PWRSTATS_TYPE_SCAN 1 /**< struct wl_pwr_scan_stats */
#define WL_PWRSTATS_TYPE_USB_HSIC 2 /**< struct wl_pwr_usb_hsic_stats */
#define WL_PWRSTATS_TYPE_PM_AWAKE1 3 /**< struct wl_pwr_pm_awake_stats_v1 */
#define WL_PWRSTATS_TYPE_CONNECTION 4 /* struct wl_pwr_connect_stats; assoc and key-exch time */
#define WL_PWRSTATS_TYPE_PCIE 6 /**< struct wl_pwr_pcie_stats */
#define WL_PWRSTATS_TYPE_PM_AWAKE2 7 /**< struct wl_pwr_pm_awake_stats_v2 */
#define WL_PWRSTATS_TYPE_SDIO 8 /* struct wl_pwr_sdio_stats */
#define WL_PWRSTATS_TYPE_MIMO_PS_METRICS 9 /* struct wl_mimo_meas_metrics_t */
#define WL_PWRSTATS_TYPE_SLICE_INDEX 10 /* slice index for which this report is meant for */
#define WL_PWRSTATS_TYPE_TSYNC 11 /**< struct wl_pwr_tsync_stats */
#define WL_PWRSTATS_TYPE_OPS_STATS 12 /* struct wl_pwr_ops_stats_t */
#define WL_PWRSTATS_TYPE_BCNTRIM_STATS 13 /* struct wl_pwr_bcntrim_stats_t */
#define WL_PWRSTATS_TYPE_SLICE_INDEX_BAND_INFO 14 /* wl_pwr_slice_index_band_t */
#define WL_PWRSTATS_TYPE_PSBW_STATS 15 /* struct wl_pwr_psbw_stats_t */
#define WL_PWRSTATS_TYPE_PM_ACCUMUL 16 /* struct wl_pwr_pm_accum_stats_v1_t */
#define WL_PWRSTATS_TYPE_SCAN_6E 17 /* struct wl_pwr_scan_6E_stats_v1 */
#define WL_PWRSTATS_TYPE_SCAN_EXT 18 /**< struct wl_pwr_scan_stats_v1 */
/* IOV AWD DATA */
#define AWD_DATA_JOIN_INFO 0
#define AWD_DATA_VERSION_V1 1
/* IOV ETD DATA */
#define ETD_DATA_JOIN_INFO 0
#define ETD_DATA_VERSION_V1 1
/* CTMODE DBG */
/* input param: [31:16] => MPDU_THRESHOLD
* [15:03] => RESERVED
* [02] => enable UFP
* [01] => enable UFC
* [00] => enalbe CTMODE
*/
#define CTMODE_DBG_CTMODE_EN (0x1u)
#define CTMODE_DBG_UFC_EN (0x2u)
#define CTMODE_DBG_UFP_EN (0x4u)
#define CTMODE_DBG_MPDU_THRESHOLD_SHIFT (7u)
#define CTMODE_DBG_MPDU_THRESHOLD_MASK ((0x1FFu) << CTMODE_DBG_MPDU_THRESHOLD_SHIFT)
#define CTMODE_DBG_BYTES_THRESHOLD_SHIFT (16u)
#define CTMODE_DBG_BYTES_THRESHOLD_MASK ((0xFFFu) << CTMODE_DBG_BYTES_THRESHOLD_SHIFT)
/* ====== SC use case configs ========= */
/* SC user/use case request */
#define WL_SC_REQ_SCAN 0u /* user scan */
#define WL_SC_REQ_CNX 1u /* associated idle */
#define WL_SC_REQ_NAN 2u /* NAN synchronization and discovery offload */
/* === Per use case configuration === */
/* scan cfgs */
#define SC_SCAN_CFG_PASSIVE_MASK 0x01u /* Enable passive scan on sc */
#define SC_SCAN_CFG_PASSIVE_SHIFT 0u
#define SC_SCAN_CFG_LP_SCAN_MASK 0x02u /* Enable low prio scan on sc */
#define SC_SCAN_CFG_LP_SCAN_SHIFT 1u
#define SC_SCAN_CFG_REG_SCAN_MASK 0x04u /* Enable split scan using sc */
#define SC_SCAN_CFG_REG_SCAN_SHIFT 2u
#define SC_SCAN_CFG_FULL_SCAN_MASK 0x08u /* Enable full scan on sc */
#define SC_SCAN_CFG_FULL_SCAN_SHIFT 3u
/* Add get and set macros for each of the configs? */
/* === Place holder for cnx and nan cfgs === */
/* Timeout checks to disable. Bits in mask, returned by hnd_get_dbg_disable_to_mask() */
/* Disables H2D DMA stall health check */
#define DBG_DISABLE_PCIE_H2D_DMA_TO_MASK 0x00000001
/* Disables D2H DMA stall health check */
#define DBG_DISABLE_PCIE_D2H_DMA_TO_MASK 0x00000002
/* Disables IOCTL timeout health check */
#define DBG_DISABLE_PCIE_IOCTL_TO_MASK 0x00000004
/* Disables flowring timeout health check */
#define DBG_DISABLE_PCIE_FLOWRING_TO_MASK 0x00000008
/* Disables rxpost timeout health check */
#define DBG_DISABLE_PCIE_RXPOST_TO_MASK 0x00000010
/* Disables D3ACK timeout health check */
#define DBG_DISABLE_PCIE_D3ACK_TO_MASK 0x00000020
/* Disables DS ACK timeout health check */
#define DBG_DISABLE_PCIE_DSACK_TO_MASK 0x00000040
/* Disables host wake assert timeout health check */
#define DBG_DISABLE_PCIE_HOST_WAKE_TO_MASK 0x00000080
/* Disables deep sleep wake timeout health check */
#define DBG_DISABLE_DS_NO_SLEEP_TO_MASK 0x00000100
/* Disables RX DMA stall health check */
#define DBG_DISABLE_RX_STALL_TO_MASK 0x00000200
/* Disables TX DMA stall health check */
#define DBG_DISABLE_TX_STALL_TO_MASK 0x00000400
#define NFIFO 6 /**< # tx/rx fifopairs */
#ifndef NFIFO_EXT
#if defined(BCM_AQM_DMA_DESC) && !defined(BCM_AQM_DMA_DESC_DISABLED)
#if (defined(LLW) && !defined(SWLLW)) || defined(BCM_SAQM_FOR_ALL_TX_QUEUES)
#ifdef SAQM_STATIC_QUEUE_CONFIG_2
#define NFIFO_EXT 9 /* 4 EDCA + 1 Mcast/Bcast + 4 Trigger */
#else
#define NFIFO_EXT 11 /* 4EDCA + 4 TWT + 1 Mcast/Bcast + 1 Spare + 1 LLQ */
#endif /* SAQM_STATIC_QUEUE_CONFIG_2 */
#else
#define NFIFO_EXT 10 /* 4EDCA + 4 TWT + 1 Mcast/Bcast + 1 Spare */
#endif /* (LLW && !SWLLW) || BCM_SAQM_FOR_ALL_TX_QUEUES */
#elif defined(WL11AX_TRIGGERQ) && !defined(WL11AX_TRIGGERQ_DISABLED)
#define NFIFO_EXT 10
#else
#define NFIFO_EXT NFIFO
#endif /* BCM_AQM_DMA_DESC && !BCM_AQM_DMA_DESC_DISABLED */
#endif /* NFIFO_EXT */
/* When new reason codes are added to list, Please update wl_reinit_names also */
/* Reinit reason codes */
enum {
WL_REINIT_RC_NONE = 0,
WL_REINIT_RC_PS_SYNC = 1,
WL_REINIT_RC_PSM_WD = 2,
WL_REINIT_RC_MAC_WAKE = 3,
WL_REINIT_RC_MAC_SUSPEND = 4,
WL_REINIT_RC_MAC_SPIN_WAIT = 5,
WL_REINIT_RC_AXI_BUS_ERROR = 6,
WL_REINIT_RC_DEVICE_REMOVED = 7,
WL_REINIT_RC_PCIE_FATAL_ERROR = 8,
WL_REINIT_RC_OL_FW_TRAP = 9,
WL_REINIT_RC_FIFO_ERR = 10,
WL_REINIT_RC_INV_TX_STATUS = 11,
WL_REINIT_RC_MQ_ERROR = 12,
WL_REINIT_RC_PHYTXERR_THRESH = 13,
WL_REINIT_RC_USER_FORCED = 14,
WL_REINIT_RC_FULL_RESET = 15,
WL_REINIT_RC_AP_BEACON = 16,
WL_REINIT_RC_PM_EXCESSED = 17,
WL_REINIT_RC_NO_CLK = 18,
WL_REINIT_RC_SW_ASSERT = 19,
WL_REINIT_RC_PSM_JMP0 = 20,
WL_REINIT_RC_PSM_RUN = 21,
WL_REINIT_RC_ENABLE_MAC = 22,
WL_REINIT_RC_SCAN_TIMEOUT = 23,
WL_REINIT_RC_JOIN_TIMEOUT = 24,
/* Below error codes are generated during D3 exit validation */
WL_REINIT_RC_LINK_NOT_ACTIVE = 25,
WL_REINIT_RC_PCI_CFG_RD_FAIL = 26,
WL_REINIT_RC_INV_VEN_ID = 27,
WL_REINIT_RC_INV_DEV_ID = 28,
WL_REINIT_RC_INV_BAR0 = 29,
WL_REINIT_RC_INV_BAR2 = 30,
WL_REINIT_RC_AER_UC_FATAL = 31,
WL_REINIT_RC_AER_UC_NON_FATAL = 32,
WL_REINIT_RC_AER_CORR = 33,
WL_REINIT_RC_AER_DEV_STS = 34,
WL_REINIT_RC_PCIe_STS = 35,
WL_REINIT_RC_MMIO_RD_FAIL = 36,
WL_REINIT_RC_MMIO_RD_INVAL = 37,
WL_REINIT_RC_MMIO_ARM_MEM_RD_FAIL = 38,
WL_REINIT_RC_MMIO_ARM_MEM_INVAL = 39,
WL_REINIT_RC_SROM_LOAD_FAILED = 40,
WL_REINIT_RC_PHY_CRASH = 41,
WL_REINIT_TX_STALL = 42,
WL_REINIT_RC_TX_FLOW_CONTROL_BLOCKED = 43,
WL_REINIT_RC_RX_HC_FAIL = 44,
WL_REINIT_RC_RX_DMA_STALL = 45,
WL_REINIT_UTRACE_BUF_OVERLAP_SR = 46,
WL_REINIT_UTRACE_TPL_OUT_BOUNDS = 47,
WL_REINIT_UTRACE_TPL_OSET_STRT0 = 48,
WL_REINIT_RC_PHYTXERR = 49,
WL_REINIT_RC_PSM_FATAL_SUSP = 50,
WL_REINIT_RC_TX_FIFO_SUSP = 51,
WL_REINIT_RC_MAC_ENABLE = 52,
WL_REINIT_RC_SCAN_STALLED = 53,
WL_REINIT_RC_PHY_HC = 54,
WL_REINIT_RC_LAST, /* DONOT use this any more, kept for legacy reasons */
WL_REINIT_RC_RADIO_CRASH = 55,
WL_REINIT_RC_BM_IDLE_FAIL_TO = 56, /* BM idle fail timeout */
WL_REINIT_RC_URB_CBM_ERROR = 57, /* URB CBM error */
WL_REINIT_RC_TXE_SHARED_ERR = 58, /* TXE shared error */
WL_REINIT_RC_TXDMA_ERR = 59, /* Tx DMA errors */
WL_REINIT_RC_RX_HW_ERR = 60, /* Rx HW error */
WL_REINIT_RC_URB_LEN_ERROR = 61, /* URB LEN error */
WL_REINIT_RC_SUPPORTED_LAST /* Use for app ONLY, DONOT use this in wlc code.
* For wlc, use WL_REINIT_RC_VERSIONED_LAST
*/
};
#define WL_REINIT_RC_V2 (2u)
#define WL_REINIT_RC_LAST_V2 (WL_REINIT_RC_RADIO_CRASH)
#define WL_REINIT_RC_INVALID 255
#define NREINITREASONCOUNT 8
/* NREINITREASONCOUNT is 8 in other branches.
* Any change to this will break wl tool compatibility with other branches
* #define NREINITREASONCOUNT WL_REINIT_RC_LAST
*/
/* REINITRSNIDX is kept for legacy reasons. Use REINIT_RSN_IDX for new versioned structure */
#define REINITRSNIDX(_x) (((_x) < WL_REINIT_RC_LAST) ? (_x) : 0)
#define REINIT_RSN_IDX(_x) (((_x) < WL_REINIT_RC_SUPPORTED_LAST) ? (_x) : 0) /* TBD: move
* this to src
*/
#define REINIT_RSN_IDX_V2(_x) (((_x) <= WL_REINIT_RC_LAST_V2) ? (_x) : 0)
#define WL_CNT_VERSION_6 6
#define WL_CNT_VERSION_7 7
#define WL_CNT_VERSION_11 11
#define WL_CNT_VERSION_XTLV 30
#define WL_CNT_VERSION_XTLV_ML 31
#define WL_COUNTERS_IOV_VERSION_1 1
#define WL_SUBCNTR_IOV_VER WL_COUNTERS_IOV_VERSION_1
/* First two uint16 are version and length fields. So offset of the first counter will be 4 */
#define FIRST_COUNTER_OFFSET 0x04
/* need for now due to src/wl/ndis automerged to other branches. e.g. BISON */
#define WLC_WITH_XTLV_CNT
/* Number of xtlv info as required to calculate subcounter offsets */
#define WL_CNT_XTLV_ID_NUM 15
#define WL_TLV_IOV_VERSION_1 1u
#define WL_TLV_IOV_VERSION_2 2u
#define WL_TLV_DATASET_V2_LEN 2u /* First 32 bit - TLV type
* Second 32 bit - TLV Len
*/
#define SUBC_SUBFLD_NUMTLV_MASK 0x00ff
#define SUBC_SUBFLD_NUMTLV_GET(val) (val & SUBC_SUBFLD_NUMTLV_MASK)
#define SUBC_SUBFLD_NUMLINKS_MASK 0x0f00
#define SUBC_SUBFLD_NUMLINKS_SHIFT 8
#define SUBC_SUBFLD_NUMLINKS_UPD(val, nl) \
(val) |= (((((uint16)nl)) << SUBC_SUBFLD_NUMLINKS_SHIFT) & \
SUBC_SUBFLD_NUMLINKS_MASK)
#define SUBC_SUBFLD_NUMLINKS_GET(val) \
(val & SUBC_SUBFLD_NUMLINKS_MASK) >> SUBC_SUBFLD_NUMLINKS_SHIFT
#define SUBC_SUBFLD_SLICEIX_MASK 0x7000
#define SUBC_SUBFLD_SLICEIX_SHIFT 12
#define SUBC_SUBFLD_SLICEIX_UPD(val, slix) \
(val) |= (((((uint16)slix)) << SUBC_SUBFLD_SLICEIX_SHIFT) & \
SUBC_SUBFLD_SLICEIX_MASK)
#define SUBC_SUBFLD_SLICEIX_GET(val) \
(val & SUBC_SUBFLD_SLICEIX_MASK) >> SUBC_SUBFLD_SLICEIX_SHIFT
/**
* tlv IDs uniquely identifies counter component
* packed into wl_cmd_t container
*/
enum wl_cnt_xtlv_id {
WL_CNT_XTLV_SLICE_IDX = 0x1, /**< Slice index */
WL_CNT_XTLV_COUNTERS_REPORT_STATUS = 0x2, /* IOV Counter Reporting */
WL_CNT_XTLV_WLC = 0x100, /**< WLC layer counters */
WL_CNT_XTLV_WLC_RINIT_RSN = 0x101, /**< WLC layer reinitreason extension: LEGACY */
WL_CNT_XTLV_WLC_HE = 0x102, /* he counters */
WL_CNT_XTLV_WLC_SECVLN = 0x103, /* security vulnerabilities counters */
WL_CNT_XTLV_WLC_HE_OMI = 0x104, /* he omi counters */
WL_CNT_XTLV_WLC_RINIT_RSN_V2 = 0x105, /**< WLC layer reinitreason extension */
WL_CNT_XTLV_WLC_MESH_PKT_V1 = 0x106, /**< WLC layer Mesh pkt counters */
WL_CNT_XTLV_WLC_HE_TX = 0x107, /* HE Tx counters for WL counters */
WL_CNT_XTLV_WLC_HE_RX = 0x108, /* HE Rx counters for WL counters */
WL_CNT_XTLV_CNTV_LE10_UCODE = 0x200, /**< wl counter ver < 11 UCODE MACSTAT */
WL_CNT_XTLV_LT40_UCODE_V1 = 0x300, /**< corerev < 40 UCODE MACSTAT */
WL_CNT_XTLV_GE40_UCODE_V1 = 0x400, /**< corerev >= 40 UCODE MACSTAT */
WL_CNT_XTLV_GE64_UCODEX_V1 = 0x800, /* corerev >= 64 UCODEX MACSTAT */
WL_CNT_XTLV_GE80_UCODE_V1 = 0x900, /* corerev >= 80 UCODEX MACSTAT */
WL_CNT_XTLV_GE80_RXERR_UCODE_V1 = 0x901, /* corerev >= 80 UCODE RXERR mac stat */
WL_CNT_XTLV_GE80_TXFUNFL_UCODE_V1 = 0x1000, /* corerev >= 80 UCODEX MACSTAT */
WL_CNT_XTLV_GE88_UCODE_TX_V1 = 0x1001, /* corerev >= 88 ucode macstats V1 - tx */
WL_CNT_XTLV_GE88_UCODE_RX_V1 = 0x1002, /* corerev >= 88 ucode macstats V1 - rx */
WL_CNT_XTLV_GE88_UCODE_TX_V2 = 0x1003, /* corerev >= 88 ucode macstats V2 - tx */
WL_CNT_XTLV_GE88_UCODE_RX_V2 = 0x1004, /* corerev >= 88 ucode macstats V2 - rx */
WL_CNT_XTLV_GE88_UCODE_TX_U32_V1 = 0x1005, /* corerev >= 88 ucode macstats V1 - tx */
WL_CNT_XTLV_GE88_UCODE_RX_U32_V1 = 0x1006, /* corerev >= 88 ucode macstats V1 - rx */
WL_CNT_XTLV_GE88_UCODE_TX_V3 = 0x1007, /* corerev >= 88 ucode macstats V3 - tx */
WL_CNT_XTLV_GE88_UCODE_RX_V3 = 0x1008, /* corerev >= 88 ucode macstats V3 - rx */
WL_CNT_XTLV_GE88_UCODE_TX_U32_V2 = 0x1009, /* corerev >= 88 ucode macstats V2 - tx */
WL_CNT_XTLV_GE88_UCODE_RX_U32_V2 = 0x100a, /* corerev >= 88 ucode macstats V2 - rx */
WL_CNT_XTLV_DYN_BW_STATS_V1 = 0x100b, /* Deprecated */
WL_CNT_XTLV_DYN_BW_STATS = 0x100c, /* corerev >= 88 DynBW stats */
WL_CNT_XTLV_SLIM_SCAN_STATS = 0x100d, /* Slim Scan stats */
WL_CNT_XTLV_DATA_BW_STATS = 0x100e, /* corerev >= 89 DataBW stats */
WL_CNT_XTLV_MACST_TX_V4 = 0x100f, /* corerev >= 88 ucode macstats V4 - tx */
WL_CNT_XTLV_MULTI_SCAN_STATS = 0x1010, /* Multi Scan stats */
WL_CNT_XTLV_PHY_RX_STATS = 0x1011, /* PHY RX stats */
/* XLTVs in this gap are available for use */
/* scan aux core related additional counters */
WL_CNT_XTLV_SCANAUX_UCODE_V1 = 0x1012,
/* For use in ecounters */
WL_CNT_XTLV_UCODE_TX_BLK0 = 0x1013,
WL_CNT_XTLV_UCODE_RX_BLK0 = 0x1014,
WL_CNT_XTLV_UCODE_RXERR_BLK0 = 0x1015,
WL_CNT_XTLV_WLC_HE_OMI_BLK0 = 0x1016,
WL_CNT_XTLV_WLC_HE_RX_BLK0 = 0x1017,
WL_CNT_XTLV_WLC_HE_TX_BLK0 = 0x1018,
WL_CNT_XTLV_DYN_BW_BLK0 = 0x1019,
WL_CNT_XTLV_DATA_BW_BLK0 = 0x101a,
WL_CNT_XTLV_WLC_HE_UNIFIED_BLK0 = 0x101b,
/* 13 XTLVs reserved for new counters that may need to be added */
WL_CNT_XTLV_UCODE_TX_BLK1 = 0x1028,
WL_CNT_XTLV_UCODE_RX_BLK1 = 0x1029,
WL_CNT_XTLV_UCODE_RXERR_BLK1 = 0x102a,
WL_CNT_XTLV_WLC_HE_OMI_BLK1 = 0x102b,
WL_CNT_XTLV_WLC_HE_RX_BLK1 = 0x102c,
WL_CNT_XTLV_WLC_HE_TX_BLK1 = 0x102d,
WL_CNT_XTLV_DYN_BW_BLK1 = 0x102e,
WL_CNT_XTLV_DATA_BW_BLK1 = 0x102f,
WL_CNT_XTLV_WLC_HE_UNIFIED_BLK1 = 0x1030,
/* 13 XTLVs reserved for new counters that may need to be added */
};
/* bitmap for clm_flags iovar */
#define WL_CLM_TXBF 0x01u /**< Flag for Tx beam forming */
#define WL_CLM_RED_EU 0x02u /* Flag for EU RED */
#define WL_CLM_EDCRS_EU 0x04u /**< Use EU post-2015 energy detect */
#define WL_CLM_DFS_TPC 0x08u /**< Flag for DFS TPC */
#define WL_CLM_RADAR_TYPE_EU 0x10u /**< Flag for EU */
#define WL_CLM_DSA 0x20u /**< Flag for DSA */
#define WL_CLM_PER_ANTENNA 0x40u /**< Flag for PER_ANTENNA */
#define WL_CLM_LO_GAIN_NBCAL 0x20u /**< Flag for LO_GAIN_NBCAL */
#define WL_CLM_PSD 0x80u /**< Flag for PSD */
#define WL_CLM_HE 0x100u /**< Flag for HE */
#define WL_CLM_NO_80MHZ 0x200u /**< Flag for NO_80MHZ */
#define WL_CLM_NO_40MHZ 0x400u /**< Flag for NO_40MHZ */
#define WL_CLM_NO_MIMO 0x800u /**< Flag for NO_MIMO */
#define WL_CLM_HAS_DSSS_EIRP 0x1000u /**< Flag for HAS_DSSS_EIRP */
#define WL_CLM_HAS_OFDM_EIRP 0x2000u /**< Flag for HAS_OFDM_EIRP */
#define WL_CLM_NO_160MHZ 0x4000u /**< Flag for NO_160MHZ */
#define WL_CLM_NO_80_80MHZ 0x8000u /**< Flag for NO_80_80MHZ */
#define WL_CLM_NO_320MHZ 0x200000u /**< Flag for NO_320MHZ */
#define WL_CLM_NO_160_160MHZ 0x400000u /**< Flag for NO_160_160MHZ */
#define WL_CLM_CBP_FCC 0x800000u /**< Flag for CBP_FCC */
#define WL_CLM_6G_P2P_FLAGS_MASK 0x7000000u /**< 3 bits to represent 6GHz p2p releated flags
* 0x3 ~ 0x6 are reserved for now
*/
#define WL_CLM_C2C_DISABLED 0x0u /**< No C2C related flags */
#define WL_CLM_C2C_EU 0x1000000u /**< Flag for C2C_EU */
#define WL_CLM_C2C_US 0x2000000u /**< Flag for C2C_US */
#define WL_CLM_VLP_P2P_DISABLE 0x7000000u /**< Flag VLP_P2P_DISABLE */
#define WL_CLM_DFS_FCC WL_CLM_DFS_TPC /**< Flag for DFS FCC */
#define WL_CLM_DFS_EU (WL_CLM_DFS_TPC | WL_CLM_RADAR_TYPE_EU) /**< Flag for DFS EU */
#define WL_CLM_PP 0x8000000u /**< Flag for Punctured bandwidth allowed */
typedef enum sup_auth_status {
/* Basic supplicant authentication states */
WLC_SUP_DISCONNECTED = 0,
WLC_SUP_CONNECTING,
WLC_SUP_IDREQUIRED,
WLC_SUP_AUTHENTICATING,
WLC_SUP_AUTHENTICATED,
WLC_SUP_KEYXCHANGE,
WLC_SUP_KEYED,
WLC_SUP_TIMEOUT,
WLC_SUP_LAST_BASIC_STATE,
/* Extended supplicant authentication states */
/** Waiting to receive handshake msg M1 */
WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
/** Preparing to send handshake msg M2 */
WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
/* Waiting to receive handshake msg M3 */
WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
WLC_SUP_KEYXCHANGE_PREP_M4, /**< Preparing to send handshake msg M4 */
WLC_SUP_KEYXCHANGE_WAIT_G1, /**< Waiting to receive handshake msg G1 */
WLC_SUP_KEYXCHANGE_PREP_G2 /**< Preparing to send handshake msg G2 */
} sup_auth_status_t;
#ifndef BCMUTILS_ERR_CODES
/* SAE (Simultaneous Authentication of Equals) error codes.
* These error codes are local.
*/
/* SAE status codes are reserved from -3072 to -4095 (1K) */
enum wl_sae_status {
WL_SAE_E_AUTH_FAILURE = -3072,
/* Discard silently */
WL_SAE_E_AUTH_DISCARD = -3073,
/* Authentication in progress */
WL_SAE_E_AUTH_CONTINUE = -3074,
/* Invalid scalar/elt */
WL_SAE_E_AUTH_COMMIT_INVALID = -3075,
/* Invalid confirm token */
WL_SAE_E_AUTH_CONFIRM_INVALID = -3076,
/* Peer scalar validation failure */
WL_SAE_E_CRYPTO_SCALAR_VALIDATION = -3077,
/* Peer element prime validation failure */
WL_SAE_E_CRYPTO_ELE_PRIME_VALIDATION = -3078,
/* Peer element is not on the curve */
WL_SAE_E_CRYPTO_ELE_NOT_ON_CURVE = -3079,
/* Generic EC error (eliptic curve related) */
WL_SAE_E_CRYPTO_EC_ERROR = -3080,
/* Both local and peer mac addrs are same */
WL_SAE_E_CRYPTO_EQUAL_MACADDRS = -3081,
/* Loop exceeded in deriving the scalar */
WL_SAE_E_CRYPTO_SCALAR_ITER_EXCEEDED = -3082,
/* ECC group is unsupported */
WL_SAE_E_CRYPTO_UNSUPPORTED_GROUP = -3083,
/* Exceeded the hunting-and-pecking counter */
WL_SAE_E_CRYPTO_PWE_COUNTER_EXCEEDED = -3084,
/* SAE crypto component is not initialized */
WL_SAE_E_CRYPTO_NOT_INITED = -3085,
/* bn_get has failed */
WL_SAE_E_CRYPTO_BN_GET_ERROR = -3086,
/* bn_set has failed */
WL_SAE_E_CRYPTO_BN_SET_ERROR = -3087,
/* PMK is not computed yet */
WL_SAE_E_CRYPTO_PMK_UNAVAILABLE = -3088,
/* Peer confirm did not match */
WL_SAE_E_CRYPTO_CONFIRM_MISMATCH = -3089,
/* Element K is at infinity no the curve */
WL_SAE_E_CRYPTO_KEY_AT_INFINITY = -3090,
/* SAE Crypto private data magic number mismatch */
WL_SAE_E_CRYPTO_PRIV_MAGIC_MISMATCH = -3091,
/* Max retry exhausted */
WL_SAE_E_MAX_RETRY_LIMIT_REACHED = -3092,
/* peer sent password ID mismatch to local */
WL_SAE_E_AUTH_PEER_PWDID_MISMATCH = -3093,
/* user not configured password */
WL_SAE_E_AUTH_PASSWORD_NOT_CONFIGURED = -3094,
/* user not configured password ID */
WL_SAE_E_AUTH_PWDID_NOT_CONFIGURED = -3095,
/* Anti-clogging token mismatch */
WL_SAE_E_AUTH_ANTI_CLOG_MISMATCH = -3096,
/* SAE PWE method mismatch */
WL_SAE_E_AUTH_PWE_MISMATCH = -3097,
/* SAE-PK validation failed */
WL_SAE_E_AUTH_PK_VALIDATION = -3098
};
/* PMK manager block. Event codes from -5120 to -6143 */
/* PSK hashing event codes */
typedef enum wlc_pmk_psk_hash_status {
WL_PMK_E_PSK_HASH_FAILED = -5120,
WL_PMK_E_PSK_HASH_DONE = -5121,
WL_PMK_E_PSK_HASH_RUNNING = -5122,
WL_PMK_E_PSK_INVALID = -5123,
WL_PMK_E_PSK_NOMEM = -5124
} wlc_pmk_psk_hash_status_t;
#endif /* BCMUTILS_ERR_CODES */
/* Per-interface reportable stats types */
enum wl_ifstats_xtlv_id {
/* global */
WL_IFSTATS_XTLV_SLICE_INDEX = 1,
WL_IFSTATS_XTLV_IF_INDEX = 2,
WL_IFSTATS_XTLV_MAC_ADDR = 3,
WL_IFSTATS_XTLV_REPORT_CMD = 4, /* Comes in an iovar */
WL_IFSTATS_XTLV_BUS_PCIE = 5,
WL_STATS_XTLV_BUS_PCIE_TX_HISTOGRAMS = 6,
WL_STATS_XTLV_BUS_PCIE_TX_QUEUE_DEPTH = 7,
/* history of blocks freed most recently */
WL_STATS_XTLV_FBINFO_STATS = 8,
/* Report data across all SCBs using ecounters */
/* STA_info ecounters */
WL_IFSTATS_XTLV_WL_STA_INFO_ECOUNTERS = 0x100,
/* For AMPDU stat sub-types requested in a different format */
/* these could be sum and report stats across slices. OR
* report sub-types in pairs so host can sum and add.
* Information sent here is across slices, therefore global
*/
WL_IFSTATS_XTLV_TX_AMPDU_STATS = 0x101,
WL_IFSTATS_XTLV_RX_AMPDU_STATS = 0x102,
/* scb ecounter statistics */
WL_IFSTATS_XTLV_SCB_ECOUNTERS = 0x103,
/* Global NAN stats */
WL_IFSTATS_XTLV_NAN_STATS = 0x104,
WL_IFSTATS_XTLV_CHAN_STATS = 0x105,
/* TDLS state */
WL_IFSTATS_XTLV_IF_TDLS_STATE = 0x106,
WL_IFSTATS_XTLV_KEY_PLUMB_INFO = 0x107,
/* HE TX related stats */
WL_IFSTATS_XTLV_HE_TXMU_STATS = 0x108,
WL_IFSTATS_XTLV_SC_PERIODIC_STATE = 0x109,
WL_IFSTATS_XTLV_WBUS_PERIODIC_STATE = 0x10A,
/* PHY ecounters */
WL_STATS_XTLV_PHY_ECOUNTER = 0x10B,
/* PHYCAL ecounters */
WL_STATS_XTLV_PHYCAL_ECOUNTER = 0x10C,
/* missed dtim eCounter */
WL_STATS_XTLV_MISSED_DTIM_COUNTER = 0x10D,
/* GCR-UR ecounters */
WL_STATS_XTLV_GCR_UR_ECOUNTERS = 0x10E,
/* Per-slice information
* Per-interface reporting could also include slice specific data
*/
/* xtlv container for reporting */
WL_IFSTATS_XTLV_WL_SLICE = 0x301,
/* Per-slice AMPDU stats */
WL_IFSTATS_XTLV_WL_SLICE_TX_AMPDU_DUMP = 0x302,
WL_IFSTATS_XTLV_WL_SLICE_RX_AMPDU_DUMP = 0x303,
/* Per-slice BTCOEX stats */
WL_IFSTATS_XTLV_WL_SLICE_BTCOEX = 0x304,
/* V11_WLCNTRS used in ecounters */
WL_IFSTATS_XTLV_WL_SLICE_V11_WLCNTRS = 0x305,
/* V30_WLCNTRS Used in ecounters */
WL_IFSTATS_XTLV_WL_SLICE_V30_WLCNTRS = 0x306,
/* phy,ucode,scan pwrstats */
WL_IFSTATS_XTLV_WL_SLICE_PWRSTATS_PHY = 0x307,
WL_IFSTATS_XTLV_WL_SLICE_PWRSTATS_SCAN = 0x308,
WL_IFSTATS_XTLV_WL_SLICE_PWRSTATS_WAKE_V2 = 0x309,
/* Per-slice LTECOEX stats */
WL_IFSTATS_XTLV_WL_SLICE_LTECOEX = 0x30A,
/* TVPM ecounters */
WL_IFSTATS_XTLV_WL_SLICE_TVPM = 0x30B,
/* TDMTX ecounters */
WL_IFSTATS_XTLV_WL_SLICE_TDMTX = 0x30C,
/* Slice specific state capture in periodic fasion */
WL_SLICESTATS_XTLV_PERIODIC_STATE = 0x30D,
WL_SLICESTATS_XTLV_HIST_TX_STATS = 0x30E,
WL_SLICESTATS_XTLV_HIST_RX_STATS = 0x30F,
/* TX histograms */
WL_STATS_XTLV_WL_SLICE_TX_HISTOGRAMS = 0x310,
/* TX queue depth */
WL_STATS_XTLV_WL_SLICE_TX_QUEUE_DEPTH = 0x311,
/* Latency instrumentation debug */
WL_STATS_XTLV_WL_QUEUE_STOP = 0x312,
/* Beamforming counters */
WL_IFSTATS_XTLV_WL_SLICE_TXBF = 0x313,
/* Per-slice BTCOEX task duration stats */
WL_IFSTATS_XTLV_WL_SLICE_BTCOEX_TSKDUR_STATS = 0x314,
/* Per-slice RC1 COEX (NR5G Coex) stats */
WL_IFSTATS_XTLV_WL_SLICE_NR5GCX = 0x315,
/* Per-slice RC1 COEX (RC1 Coex) stats for trunk and future branches */
WL_IFSTATS_XTLV_WL_SLICE_RC1CX = 0x315,
/* Per-slice sta offload stats */
WL_IFSTATS_XTLV_WL_SLICE_STA_OFLD_STATS = 0x316,
/* Per-Slice [only aux] btcec sc stats */
WL_IFSTATS_XTLV_WL_SLICE_BTCEC_PERIODIC_STATS = 0x317,
/* Per-Slice sc lq stats */
WL_IFSTATS_XTLV_SC_CHANIM_PERIODIC_STATS = 0x318,
/* Per-slice RC2 COEX stats */
WL_IFSTATS_XTLV_WL_SLICE_RC2CX = 0x319,
/* Rx MPDU lost counter per-slice */
WL_STATS_XTLV_WL_SLICE_RX_LOST_CNT = 0x31A,
/* per slice tx mpdu cnt eCounters */
WL_STATS_XTLV_WME_TX_CNT_WL_SLICE = 0x31B,
/* per slice rx mpdu cnt eCounters */
WL_STATS_XTLV_WME_RX_CNT_WL_SLICE = 0x31C,
/* Per-slice UWBCX stats */
WL_IFSTATS_XTLV_WL_SLICE_UWBCX = 0x31D,
/* Per-slice UWBCX stats */
WL_IFSTATS_XTLV_WL_SLICE_PWRSTATS_SCAN_6E = 0x31E,
/* Per-interface */
/* XTLV container for reporting */
WL_IFSTATS_XTLV_IF = 0x501,
/* Generic stats applicable to all IFs */
WL_IFSTATS_XTLV_GENERIC = 0x502,
/* Infra specific */
WL_IFSTATS_XTLV_INFRA_SPECIFIC = 0x503,
/* MGT counters infra and softAP */
WL_IFSTATS_XTLV_MGT_CNT = 0x504,
/* AMPDU stats on per-IF */
WL_IFSTATS_XTLV_AMPDU_DUMP = 0x505,
WL_IFSTATS_XTLV_IF_SPECIFIC = 0x506,
WL_IFSTATS_XTLV_IF_LQM = 0x508,
/* Interface specific state capture in periodic fashion */
WL_IFSTATS_XTLV_IF_PERIODIC_STATE = 0x509,
/* Event statistics on per-IF */
WL_IFSTATS_XTLV_IF_EVENT_STATS = 0x50A,
/* Infra HE specific */
WL_IFSTATS_XTLV_INFRA_SPECIFIC_HE = 0x50B,
/* Roam statistics */
WL_IFSTATS_XTLV_ROAM_STATS_PERIODIC = 0x50C,
WL_IFSTATS_XTLV_ROAM_STATS_EVENT = 0x50D,
WL_IFSTATS_XTLV_IF_PEER_STATS = 0x50E,
/* ecounters for nan */
/* nan slot stats */
WL_IFSTATS_XTLV_NAN_SLOT_STATS = 0x601,
/* Ecounters for NDP session status */
WL_STATS_XTLV_NDP_SESSION_STATUS = 0x602,
/* NAN disc frame status ecounters */
WL_STATS_XTLV_NAN_DISC_FRM_STATUS = 0x603
};
/* Sub-XTLV IDs for GCR-UR stats */
enum wl_gcr_ur_xtlv_id {
/* Generix RX info */
WL_XTLV_GCR_UR_RX_INFO = 0x1,
/* RSSI histogram of received AMPDUs */
WL_XTLV_GCR_UR_RX_RSSI = 0x2,
/* SNR histogram of received AMPDUs */
WL_XTLV_GCR_UR_RX_SNR = 0x3,
/* MCS histogram of received AMPDUs */
WL_XTLV_GCR_UR_RX_MCS = 0x4,
/* NSS histogram of received AMPDUs */
WL_XTLV_GCR_UR_RX_NSS = 0x5,
/* BW histogram of received AMPDUs */
WL_XTLV_GCR_UR_RX_BW = 0x6
};
/* CAPEXT WL partition */
/* The features listed in the enumeration below have subfeatures
* If a new feature is added and that feature has sub-features that need to be reported,
* add that feature here
*/
#define CAPEXT_WL_FEATURE_ID_BASE (2048u)
enum capext_wl_feature_id {
CAPEXT_WL_FEATURE_RSVD = (CAPEXT_WL_FEATURE_ID_BASE + 0),
/* WL top level feature id to hold and report bitmaps of features with and
* without sub-features.
*/
CAPEXT_WL_FEATURE_WL_FEATURES = (CAPEXT_WL_FEATURE_ID_BASE + 1),
/* other wl features with sub-features that need to be reported */
CAPEXT_WL_FEATURE_AMPDU = (CAPEXT_WL_FEATURE_ID_BASE + 2),
CAPEXT_WL_FEATURE_AMSDU = (CAPEXT_WL_FEATURE_ID_BASE + 3),
CAPEXT_WL_FEATURE_STBC = (CAPEXT_WL_FEATURE_ID_BASE + 4),
CAPEXT_WL_FEATURE_NAN = (CAPEXT_WL_FEATURE_ID_BASE + 5),
CAPEXT_WL_FEATURE_COEX = (CAPEXT_WL_FEATURE_ID_BASE + 6),
CAPEXT_WL_FEATURE_FBT = (CAPEXT_WL_FEATURE_ID_BASE + 7),
CAPEXT_WL_FEATURE_MBSS = (CAPEXT_WL_FEATURE_ID_BASE + 8),
CAPEXT_WL_FEATURE_TXPWRCAP = (CAPEXT_WL_FEATURE_ID_BASE + 9),
CAPEXT_WL_FEATURE_PPR = (CAPEXT_WL_FEATURE_ID_BASE + 10),
CAPEXT_WL_FEATURE_PKT_FILTER = (CAPEXT_WL_FEATURE_ID_BASE + 11),
CAPEXT_WL_FEATURE_EHT = (CAPEXT_WL_FEATURE_ID_BASE + 12),
CAPEXT_WL_FEATURE_AP = (CAPEXT_WL_FEATURE_ID_BASE + 13),
CAPEXT_WL_FEATURE_MAX
};
/* MBSS cap sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_mbss_subfeature_bitpos {
WLC_CAPEXT_MBSS_BITPOS_UCODE_BSS_0 = 0,
WLC_CAPEXT_MBSS_BITPOS_UCODE_BSS_1 = 1,
WLC_CAPEXT_MBSS_BITPOS_UCODE_BSS_2 = 2,
WLC_CAPEXT_MBSS_BITPOS_MAX
};
/* AMPDU cap sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_ampdu_subfeature_bitpos {
WLC_CAPEXT_AMPDU_BITPOS_RX = 0,
WLC_CAPEXT_AMPDU_BITPOS_TX = 1,
WLC_CAPEXT_AMPDU_BITPOS_MAX
};
/* AMSDU cap sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_amsdu_subfeature_bitpos {
WLC_CAPEXT_AMSDU_BITPOS_RX = 0,
WLC_CAPEXT_AMSDU_BITPOS_TX = 1,
WLC_CAPEXT_AMSDU_BITPOS_DYNLEN = 2,
WLC_CAPEXT_AMSDU_BITPOS_MAX
};
/* STBC cap sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_stbc_subfeature_bitpos {
WLC_CAPEXT_STBC_BITPOS_TX = 0,
WLC_CAPEXT_STBC_BITPOS_RX_1SS = 1,
WLC_CAPEXT_STBC_BITPOS_MAX
};
/* TX power cap sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_txpwrcap_subfeature_bitpos {
WLC_CAPEXT_TXPWRCAP_BITPOS_RSVD = 0,
WLC_CAPEXT_TXPWRCAP_BITPOS_TXPWRCAP_1 = 1,
WLC_CAPEXT_TXPWRCAP_BITPOS_TXPWRCAP_2 = 2,
WLC_CAPEXT_TXPWRCAP_BITPOS_TXPWRCAP_3 = 3,
WLC_CAPEXT_TXPWRCAP_BITPOS_TXPWRCAP_4 = 4,
WLC_CAPEXT_TXPWRCAP_BITPOS_MAX
};
/* PPR sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_ppr_subfeature_bitpos {
WLC_CAPEXT_PPR_BITPOS_RSVD = 0,
WLC_CAPEXT_PPR_BITPOS_TLV_VER_1 = 1,
WLC_CAPEXT_PPR_BITPOS_TLV_VER_2 = 2,
WLC_CAPEXT_PPR_BITPOS_TLV_VER_3 = 3,
WLC_CAPEXT_PPR_BITPOS_TLV_VER_4 = 4,
WLC_CAPEXT_PPR_BITPOS_MAX
};
/* COEX sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_coex_subfeature_bitpos {
WLC_CAPEXT_COEX_BITPOS_LTE = 0,
WLC_CAPEXT_COEX_BITPOS_LTECX_LBT = 1,
WLC_CAPEXT_COEX_BITPOS_BTC_WIFI_PROT = 2,
WLC_CAPEXT_COEX_BITPOS_RC1 = 3,
WLC_CAPEXT_COEX_BITPOS_SIB = 5,
WLC_CAPEXT_COEX_BITPOS_BT2G = 7,
WLC_CAPEXT_COEX_BITPOS_BT5G = 8,
WLC_CAPEXT_COEX_BITPOS_MAX
};
/* NAN sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_nan_subfeature_bitpos {
#ifdef NAN_DAM_ANDROID
WLC_CAPEXT_NAN_BITPOS_AUTODAM = 0,
WLC_CAPEXT_NAN_BITPOS_P2P = 1,
#endif
WLC_CAPEXT_NAN_BITPOS_RANGE = 2,
WLC_CAPEXT_NAN_BITPOS_MESH = 3,
WLC_CAPEXT_NAN_BITPOS_MAX
};
/* FBT sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_fbt_subfeature_bitpos {
WLC_CAPEXT_FBT_BITPOS_OVERDS = 0,
WLC_CAPEXT_FBT_BITPOS_ADPT = 1,
WLC_CAPEXT_FBT_BITPOS_MAX
};
/* Packet filter sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_pkt_filter_subfeature_bitpos {
WLC_CAPEXT_PKT_FILTER_BITPOS_PKT_FILTER2 = 0,
WLC_CAPEXT_PKT_FILTER_BITPOS_PKT_FILTER6 = 1,
WLC_CAPEXT_PKT_FILTER_BITPOS_MAX
};
/* AP sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_ap_subfeature_bitpos {
WLC_CAPEXT_AP_BITPOS_NONAX = 0,
WLC_CAPEXT_AP_BITPOS_AX_5G_ONLY = 1,
WLC_CAPEXT_AP_BITPOS_SAE = 2,
WLC_CAPEXT_AP_BITPOS_BCNPROT_AP = 3,
WLC_CAPEXT_AP_BITPOS_MAX
};
/* EHT sub-feature bit positions. These sub-features need to be reported */
enum wlc_capext_eht_subfeature_bitpos {
WLC_CAPEXT_EHT_BITPOS_320MHZ = 0,
WLC_CAPEXT_EHT_BITPOS_MLO = 1,
WLC_CAPEXT_EHT_BITPOS_MAX
};
/* WLC features bit positions in top level WLC feature id. Features mentioned below are reported */
enum wlc_capext_feature_bitpos {
WLC_CAPEXT_FEATURE_BITPOS_AP = 0, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_STA = 1,
WLC_CAPEXT_FEATURE_BITPOS_TOE = 2,
WLC_CAPEXT_FEATURE_BITPOS_WME = 3,
WLC_CAPEXT_FEATURE_BITPOS_802_11d = 4,
WLC_CAPEXT_FEATURE_BITPOS_802_11h = 5,
WLC_CAPEXT_FEATURE_BITPOS_RM = 6,
WLC_CAPEXT_FEATURE_BITPOS_CQA = 7,
WLC_CAPEXT_FEATURE_BITPOS_CAC = 8,
WLC_CAPEXT_FEATURE_BITPOS_MBSS = 9, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_DUALBAND = 10,
WLC_CAPEXT_FEATURE_BITPOS_AMPDU = 11, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_AMSDU = 12, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_TDLS = 13,
WLC_CAPEXT_FEATURE_BITPOS_WMF = 14,
WLC_CAPEXT_FEATURE_BITPOS_RXCHAIN_PWRSAVE = 15,
WLC_CAPEXT_FEATURE_BITPOS_RADIO_PWRSAVE = 16,
WLC_CAPEXT_FEATURE_BITPOS_P2P = 17,
WLC_CAPEXT_FEATURE_BITPOS_BCMDCS = 18,
WLC_CAPEXT_FEATURE_BITPOS_PROP_TXSTATUS = 19,
WLC_CAPEXT_FEATURE_BITPOS_MCHAN = 20,
WLC_CAPEXT_FEATURE_BITPOS_WDS = 21,
WLC_CAPEXT_FEATURE_BITPOS_DWDS = 22,
WLC_CAPEXT_FEATURE_BITPOS_CSO = 23,
WLC_CAPEXT_FEATURE_BITPOS_P2P0 = 24,
WLC_CAPEXT_FEATURE_BITPOS_ANQPO = 25,
WLC_CAPEXT_FEATURE_BITPOS_PROXD = 26,
WLC_CAPEXT_FEATURE_BITPOS_VHT_PROP_RATES = 27,
WLC_CAPEXT_FEATURE_BITPOS_MU_BEAMFORMER = 28,
WLC_CAPEXT_FEATURE_BITPOS_SU_BEAMFORMER = 29,
WLC_CAPEXT_FEATURE_BITPOS_MU_BEAMFORMEE = 30,
WLC_CAPEXT_FEATURE_BITPOS_SU_BEAMFORMEE = 31,
WLC_CAPEXT_FEATURE_BITPOS_160MHZ_SUPPORT = 32,
WLC_CAPEXT_FEATURE_BITPOS_HE = 33,
WLC_CAPEXT_FEATURE_BITPOS_EHT = 34, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_DFRTS = 35,
WLC_CAPEXT_FEATURE_BITPOS_LPAS = 36,
WLC_CAPEXT_FEATURE_BITPOS_TXPWRCACHE = 37,
WLC_CAPEXT_FEATURE_BITPOS_STBC = 38, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_PS_PRETEND = 39,
WLC_CAPEXT_FEATURE_BITPOS_MP2P = 40,
WLC_CAPEXT_FEATURE_BITPOS_RSDB = 41,
WLC_CAPEXT_FEATURE_BITPOS_PRBRESP_MAC_FLTR = 42,
WLC_CAPEXT_FEATURE_BITPOS_MFP = 43,
WLC_CAPEXT_FEATURE_BITPOS_NDOE = 44,
WLC_CAPEXT_FEATURE_BITPOS_RSSI_MON = 45,
WLC_CAPEXT_FEATURE_BITPOS_WNM = 46,
WLC_CAPEXT_FEATURE_BITPOS_BSSTRANS = 47,
WLC_CAPEXT_FEATURE_BITPOS_EPNO = 48,
WLC_CAPEXT_FEATURE_BITPOS_PFNX = 49,
WLC_CAPEXT_FEATURE_BITPOS_SCANMAC = 51,
WLC_CAPEXT_FEATURE_BITPOS_BDO = 52,
WLC_CAPEXT_FEATURE_BITPOS_PPR = 53, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_VE = 54,
WLC_CAPEXT_FEATURE_BITPOS_FBT = 55, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_CDEF = 56,
WLC_CAPEXT_FEATURE_BITPOS_TXPWRCAP = 58, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_MIMO_PS = 59,
WLC_CAPEXT_FEATURE_BITPOS_ARB = 60,
WLC_CAPEXT_FEATURE_BITPOS_OCL = 61,
WLC_CAPEXT_FEATURE_BITPOS_D11STATUS = 62,
WLC_CAPEXT_FEATURE_BITPOS_SCANCACHE = 63,
WLC_CAPEXT_FEATURE_BITPOS_APF = 64,
WLC_CAPEXT_FEATURE_BITPOS_ICMP = 65,
WLC_CAPEXT_FEATURE_BITPOS_IFVER = 66,
WLC_CAPEXT_FEATURE_BITPOS_TKO = 67,
WLC_CAPEXT_FEATURE_BITPOS_BGDFS = 68,
WLC_CAPEXT_FEATURE_BITPOS_IDAUTH = 69,
WLC_CAPEXT_FEATURE_BITPOS_IFST = 70,
WLC_CAPEXT_FEATURE_BITPOS_NAP = 71,
WLC_CAPEXT_FEATURE_BITPOS_UCM = 72,
WLC_CAPEXT_FEATURE_BITPOS_FIE = 73,
WLC_CAPEXT_FEATURE_BITPOS_TVPM = 74,
WLC_CAPEXT_FEATURE_BITPOS_TSYNC = 75,
WLC_CAPEXT_FEATURE_BITPOS_BCNTRIM = 76,
WLC_CAPEXT_FEATURE_BITPOS_LPR_SCAN = 77,
WLC_CAPEXT_FEATURE_BITPOS_BKOFF_EVT = 78,
WLC_CAPEXT_FEATURE_BITPOS_OPS = 79,
WLC_CAPEXT_FEATURE_BITPOS_CLM_RESTRICT = 80,
WLC_CAPEXT_FEATURE_BITPOS_EVT_EXT = 81,
WLC_CAPEXT_FEATURE_BITPOS_TDMTX = 83,
WLC_CAPEXT_FEATURE_BITPOS_NATOE = 84,
WLC_CAPEXT_FEATURE_BITPOS_MONITOR = 85,
WLC_CAPEXT_FEATURE_BITPOS_PSBW = 86,
WLC_CAPEXT_FEATURE_BITPOS_ROAMSTATS = 87,
WLC_CAPEXT_FEATURE_BITPOS_IDSUP = 88,
WLC_CAPEXT_FEATURE_BITPOS_GCMP = 89,
WLC_CAPEXT_FEATURE_BITPOS_MBO = 90,
WLC_CAPEXT_FEATURE_BITPOS_ESTM = 91,
WLC_CAPEXT_FEATURE_BITPOS_SC = 92,
WLC_CAPEXT_FEATURE_BITPOS_6G = 93,
WLC_CAPEXT_FEATURE_BITPOS_TX_PROF = 94,
WLC_CAPEXT_FEATURE_BITPOS_DSA = 95,
WLC_CAPEXT_FEATURE_BITPOS_ARPOE = 96,
WLC_CAPEXT_FEATURE_BITPOS_BCNPROT = 97,
WLC_CAPEXT_FEATURE_BITPOS_AVOID_BSSID = 98,
WLC_CAPEXT_FEATURE_BITPOS_IOT_BM = 99,
WLC_CAPEXT_FEATURE_BITPOS_IOT_BD = 100,
WLC_CAPEXT_FEATURE_BITPOS_HOST_SFHLLC = 101,
WLC_CAPEXT_FEATURE_BITPOS_RCO = 102,
WLC_CAPEXT_FEATURE_BITPOS_PMR = 103,
WLC_CAPEXT_FEATURE_BITPOS_SCR = 104,
WLC_CAPEXT_FEATURE_BITPOS_DTPC = 105,
WLC_CAPEXT_FEATURE_BITPOS_PASN = 106,
WLC_CAPEXT_FEATURE_BITPOS_QOS_MGMT = 107,
WLC_CAPEXT_FEATURE_BITPOS_LPC = 108,
WLC_CAPEXT_FEATURE_BITPOS_SAE = 109,
WLC_CAPEXT_FEATURE_BITPOS_EXTSAE = 110,
WLC_CAPEXT_FEATURE_BITPOS_D3CBUF = 111,
WLC_CAPEXT_FEATURE_BITPOS_PKT_FILTER = 112, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_COEX = 113, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_NAN = 114, /* feature with sub-features */
WLC_CAPEXT_FEATURE_BITPOS_IGMPOE = 115,
WLC_CAPEXT_FEATURE_BITPOS_OWE = 116,
WLC_CAPEXT_FEATURE_BITPOS_CSI = 117,
WLC_CAPEXT_FEATURE_BITPOS_SAE_H2E = 118,
WLC_CAPEXT_FEATURE_BITPOS_SAE_PK = 119,
WLC_CAPEXT_FEATURE_BITPOS_OBSS_HW = 120,
WLC_CAPEXT_FEATURE_BITPOS_DYN_BW = 121,
WLC_CAPEXT_FEATURE_BITPOS_OCT = 122,
WLC_CAPEXT_FEATURE_BITPOS_MBO_MIN = 123,
WLC_CAPEXT_FEATURE_BITPOS_OCV = 124,
WLC_CAPEXT_FEATURE_BITPOS_OCV_AP = 125,
WLC_CAPEXT_FEATURE_BITPOS_WIFI_BT5G = 126,
WLC_CAPEXT_FEATURE_BITPOS_SAE_EXT = 127,
WLC_CAPEXT_FEATURE_BITPOS_11AZ = 128,
WLC_CAPEXT_FEATURE_BITPOS_PRUNE_WPA = 129,
WLC_CAPEXT_FEATURE_BITPOS_SCCA = 130,
WLC_CAPEXT_FEATURE_BITPOS_SC_6G_HE = 131,
WLC_CAPEXT_FEATURE_BITPOS_SPMI_SCAN_FWD = 132,
WLC_CAPEXT_FEATURE_BITPOS_OWE_AP = 133,
WLC_CAPEXT_FEATURE_BITPOS_EDS = 134,
WLC_CAPEXT_FEATURE_BITPOS_PLATCFG = 135,
WLC_CAPEXT_FEATURE_BITPOS_ANTGAIN6G = 136,
WLC_CAPEXT_FEATURE_BITPOS_MONITOR_MULTI = 137,
WLC_CAPEXT_FEATURE_BITPOS_MPF_SCAN = 138,
WLC_CAPEXT_FEATURE_BITPOS_MAX
};
/* Debug Crash types */
#define WL_DBG_CRSH_TYPE_RD_RANDOM 0x00u
#define WL_DBG_CRSH_TYPE_RD_INV_CORE 0x01u
#define WL_DBG_CRSH_TYPE_WR_INV_CORE 0x02u
#define WL_DBG_CRSH_TYPE_RD_INV_WRAP 0x03u
#define WL_DBG_CRSH_TYPE_WR_INV_WRAP 0x04u
#define WL_DBG_CRSH_TYPE_RD_RES_CORE 0x05u
#define WL_DBG_CRSH_TYPE_WR_RES_CORE 0x06u
#define WL_DBG_CRSH_TYPE_RD_RES_WRAP 0x07u
#define WL_DBG_CRSH_TYPE_WR_RES_WRAP 0x08u
#define WL_DBG_CRSH_TYPE_RD_CORE_NO_CLK 0x09u
#define WL_DBG_CRSH_TYPE_WR_CORE_NO_CLK 0x0Au
#define WL_DBG_CRSH_TYPE_RD_CORE_NO_PWR 0x0Bu
#define WL_DBG_CRSH_TYPE_WR_CORE_NO_PWR 0x0Cu
#define WL_DBG_CRSH_TYPE_PCIe_AER 0x0Du
#define WL_DBG_CRSH_TYPE_POWERCYCLE 0x0Eu
#define WL_DBG_CRSH_TYPE_TRAP 0x0Eu
#define WL_DBG_CRSH_TYPE_HANG 0x0Fu
#define WL_DBG_CRSH_TYPE_PHYTXERR 0x10u
#define WL_DBG_CRSH_TYPE_PHYREAD 0x11u
#define WL_DBG_CRSH_TYPE_PHYWRITE 0x12u
#define WL_DBG_CRSH_TYPE_INV_PHYREAD 0x13u
#define WL_DBG_CRSH_TYPE_INV_PHYWRITE 0x14u
#define WL_DBG_CRSH_TYPE_DUMP_STATE 0x15u
/* Radio/PHY health check crash scenarios - reserved 0x16 to 0x30 */
#define WL_DBG_CRSH_TYPE_RADIO_HEALTHCHECK_START 0x16u
#define WL_DBG_CRSH_TYPE_DESENSE_LIMITS 0x17u
#define WL_DBG_CRSH_TYPE_BASEINDEX_LIMITS 0x18u
#define WL_DBG_CRSH_TYPE_TXCHAIN_INVALID 0x19u
#define WL_DBG_CRSH_TYPE_CRITICAL_MALLOC_FAIL 0x1au
#define WL_DBG_CRSH_TYPE_TEMPSENSE_LIMITS 0x20u
#define WL_DBG_CRSH_TYPE_TXPOWER_LIMITS 0x21u
#define WL_DBG_CRSH_TYPE_VCOCAL_FAILED 0x22u
#define WL_DBG_CRSH_TYPE_PLL_NOTLOCKED 0x23u
#define WL_DBG_CRSH_TYPE_RADIO_HEALTHCHECK_LAST 0x30u
#define WL_DBG_CRSH_TYPE_BTCOEX_RFACTIVE 0x31u
#define WL_DBG_CRSH_TYPE_BTCOEX_TXCONF_DELAY 0x32u
#define WL_DBG_CRSH_TYPE_BTCOEX_ANT_DELAY 0x33u
#define WL_DBG_CRSH_TYPE_BTCOEX_INVLD_TASKID 0x34u
#define WL_DBG_CRSH_TYPE_STACK_OVERRUN 0x35u
#define WL_DBG_CRSH_TYPE_MPU_HCHK 0x36u
#define WL_DBG_CRSH_TYPE_STACK_CORRUPTION 0x38u
/* To maintain uniformity with other branches, leaving 0x37 & 0x38 unused */
#define WL_DBG_CRSH_TYPE_ARM_DBG_REG_ACCESS 0x39u
#define WL_DBG_CRSH_TYPE_WLREGON 0x3au
#define WL_DBG_CRSH_TYPE_SR_DCCAL0 0x40u
#define WL_DBG_CRSH_TYPE_SR_DCCAL1 0x41u
#define WL_DBG_CRSH_TYPE_SR_RXIQCAL0 0x50u
#define WL_DBG_CRSH_TYPE_SR_RXIQCAL1 0x51u
#define WL_DBG_CRSH_TYPE_SR_TEMP0 0x60u
#define WL_DBG_CRSH_TYPE_SR_TEMP1 0x61u
#define WL_DBG_CRSH_TYPE_SR_TEMP2 0x62u
#define WL_DBG_CRSH_TYPE_SR_FULLCAL0 0x70u
#define WL_DBG_CRSH_TYPE_SR_FULLCAL1 0x71u
#define WL_DBG_CRSH_TYPE_SR_MPCAL0 0x80u
#define WL_DBG_CRSH_TYPE_SR_MPCAL1 0x81u
#define WL_DBG_CRSH_TYPE_SR_SEM 0x90u
#define WL_DBG_CRSH_TYPE_SR_AXI 0x91u
#define WL_DBG_CRSH_TYPE_SR_TEMPREQ_NORSP 0xa0u
#define WL_DBG_CRSH_TYPE_SR_CALREQ_NORSP 0xa1u
#define WL_DBG_CRSH_TYPE_LAST 0xa2u
#endif /* wlioctl_defs_h */