| /* | |
| * Renesas R-Car GPIO Support | |
| * | |
| * Copyright (C) 2013 Magnus Damm | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/ioport.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/module.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/platform_data/gpio-rcar.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| struct gpio_rcar_priv { | |
| void __iomem *base; | |
| spinlock_t lock; | |
| struct gpio_rcar_config config; | |
| struct platform_device *pdev; | |
| struct gpio_chip gpio_chip; | |
| struct irq_chip irq_chip; | |
| struct irq_domain *irq_domain; | |
| }; | |
| #define IOINTSEL 0x00 | |
| #define INOUTSEL 0x04 | |
| #define OUTDT 0x08 | |
| #define INDT 0x0c | |
| #define INTDT 0x10 | |
| #define INTCLR 0x14 | |
| #define INTMSK 0x18 | |
| #define MSKCLR 0x1c | |
| #define POSNEG 0x20 | |
| #define EDGLEVEL 0x24 | |
| #define FILONOFF 0x28 | |
| static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) | |
| { | |
| return ioread32(p->base + offs); | |
| } | |
| static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, | |
| u32 value) | |
| { | |
| iowrite32(value, p->base + offs); | |
| } | |
| static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, | |
| int bit, bool value) | |
| { | |
| u32 tmp = gpio_rcar_read(p, offs); | |
| if (value) | |
| tmp |= BIT(bit); | |
| else | |
| tmp &= ~BIT(bit); | |
| gpio_rcar_write(p, offs, tmp); | |
| } | |
| static void gpio_rcar_irq_disable(struct irq_data *d) | |
| { | |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); | |
| gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); | |
| } | |
| static void gpio_rcar_irq_enable(struct irq_data *d) | |
| { | |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); | |
| gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); | |
| } | |
| static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, | |
| unsigned int hwirq, | |
| bool active_high_rising_edge, | |
| bool level_trigger) | |
| { | |
| unsigned long flags; | |
| /* follow steps in the GPIO documentation for | |
| * "Setting Edge-Sensitive Interrupt Input Mode" and | |
| * "Setting Level-Sensitive Interrupt Input Mode" | |
| */ | |
| spin_lock_irqsave(&p->lock, flags); | |
| /* Configure postive or negative logic in POSNEG */ | |
| gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); | |
| /* Configure edge or level trigger in EDGLEVEL */ | |
| gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); | |
| /* Select "Interrupt Input Mode" in IOINTSEL */ | |
| gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); | |
| /* Write INTCLR in case of edge trigger */ | |
| if (!level_trigger) | |
| gpio_rcar_write(p, INTCLR, BIT(hwirq)); | |
| spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| struct gpio_rcar_priv *p = irq_data_get_irq_chip_data(d); | |
| unsigned int hwirq = irqd_to_hwirq(d); | |
| dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); | |
| switch (type & IRQ_TYPE_SENSE_MASK) { | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); | |
| break; | |
| case IRQ_TYPE_LEVEL_LOW: | |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); | |
| break; | |
| case IRQ_TYPE_EDGE_RISING: | |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) | |
| { | |
| struct gpio_rcar_priv *p = dev_id; | |
| u32 pending; | |
| unsigned int offset, irqs_handled = 0; | |
| while ((pending = gpio_rcar_read(p, INTDT))) { | |
| offset = __ffs(pending); | |
| gpio_rcar_write(p, INTCLR, BIT(offset)); | |
| generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); | |
| irqs_handled++; | |
| } | |
| return irqs_handled ? IRQ_HANDLED : IRQ_NONE; | |
| } | |
| static inline struct gpio_rcar_priv *gpio_to_priv(struct gpio_chip *chip) | |
| { | |
| return container_of(chip, struct gpio_rcar_priv, gpio_chip); | |
| } | |
| static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, | |
| unsigned int gpio, | |
| bool output) | |
| { | |
| struct gpio_rcar_priv *p = gpio_to_priv(chip); | |
| unsigned long flags; | |
| /* follow steps in the GPIO documentation for | |
| * "Setting General Output Mode" and | |
| * "Setting General Input Mode" | |
| */ | |
| spin_lock_irqsave(&p->lock, flags); | |
| /* Configure postive logic in POSNEG */ | |
| gpio_rcar_modify_bit(p, POSNEG, gpio, false); | |
| /* Select "General Input/Output Mode" in IOINTSEL */ | |
| gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); | |
| /* Select Input Mode or Output Mode in INOUTSEL */ | |
| gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); | |
| spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| return pinctrl_request_gpio(chip->base + offset); | |
| } | |
| static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| pinctrl_free_gpio(chip->base + offset); | |
| /* Set the GPIO as an input to ensure that the next GPIO request won't | |
| * drive the GPIO pin as an output. | |
| */ | |
| gpio_rcar_config_general_input_output_mode(chip, offset, false); | |
| } | |
| static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| gpio_rcar_config_general_input_output_mode(chip, offset, false); | |
| return 0; | |
| } | |
| static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| return (int)(gpio_rcar_read(gpio_to_priv(chip), INDT) & BIT(offset)); | |
| } | |
| static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct gpio_rcar_priv *p = gpio_to_priv(chip); | |
| unsigned long flags; | |
| spin_lock_irqsave(&p->lock, flags); | |
| gpio_rcar_modify_bit(p, OUTDT, offset, value); | |
| spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, | |
| int value) | |
| { | |
| /* write GPIO value to output before selecting output mode of pin */ | |
| gpio_rcar_set(chip, offset, value); | |
| gpio_rcar_config_general_input_output_mode(chip, offset, true); | |
| return 0; | |
| } | |
| static int gpio_rcar_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset); | |
| } | |
| static int gpio_rcar_irq_domain_map(struct irq_domain *h, unsigned int virq, | |
| irq_hw_number_t hw) | |
| { | |
| struct gpio_rcar_priv *p = h->host_data; | |
| dev_dbg(&p->pdev->dev, "map hw irq = %d, virq = %d\n", (int)hw, virq); | |
| irq_set_chip_data(virq, h->host_data); | |
| irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); | |
| set_irq_flags(virq, IRQF_VALID); /* kill me now */ | |
| return 0; | |
| } | |
| static struct irq_domain_ops gpio_rcar_irq_domain_ops = { | |
| .map = gpio_rcar_irq_domain_map, | |
| }; | |
| static int gpio_rcar_probe(struct platform_device *pdev) | |
| { | |
| struct gpio_rcar_config *pdata = pdev->dev.platform_data; | |
| struct gpio_rcar_priv *p; | |
| struct resource *io, *irq; | |
| struct gpio_chip *gpio_chip; | |
| struct irq_chip *irq_chip; | |
| const char *name = dev_name(&pdev->dev); | |
| int ret; | |
| p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); | |
| if (!p) { | |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); | |
| ret = -ENOMEM; | |
| goto err0; | |
| } | |
| /* deal with driver instance configuration */ | |
| if (pdata) | |
| p->config = *pdata; | |
| p->pdev = pdev; | |
| platform_set_drvdata(pdev, p); | |
| spin_lock_init(&p->lock); | |
| io = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| if (!io || !irq) { | |
| dev_err(&pdev->dev, "missing IRQ or IOMEM\n"); | |
| ret = -EINVAL; | |
| goto err0; | |
| } | |
| p->base = devm_ioremap_nocache(&pdev->dev, io->start, | |
| resource_size(io)); | |
| if (!p->base) { | |
| dev_err(&pdev->dev, "failed to remap I/O memory\n"); | |
| ret = -ENXIO; | |
| goto err0; | |
| } | |
| gpio_chip = &p->gpio_chip; | |
| gpio_chip->request = gpio_rcar_request; | |
| gpio_chip->free = gpio_rcar_free; | |
| gpio_chip->direction_input = gpio_rcar_direction_input; | |
| gpio_chip->get = gpio_rcar_get; | |
| gpio_chip->direction_output = gpio_rcar_direction_output; | |
| gpio_chip->set = gpio_rcar_set; | |
| gpio_chip->to_irq = gpio_rcar_to_irq; | |
| gpio_chip->label = name; | |
| gpio_chip->owner = THIS_MODULE; | |
| gpio_chip->base = p->config.gpio_base; | |
| gpio_chip->ngpio = p->config.number_of_pins; | |
| irq_chip = &p->irq_chip; | |
| irq_chip->name = name; | |
| irq_chip->irq_mask = gpio_rcar_irq_disable; | |
| irq_chip->irq_unmask = gpio_rcar_irq_enable; | |
| irq_chip->irq_enable = gpio_rcar_irq_enable; | |
| irq_chip->irq_disable = gpio_rcar_irq_disable; | |
| irq_chip->irq_set_type = gpio_rcar_irq_set_type; | |
| irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED; | |
| p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, | |
| p->config.number_of_pins, | |
| p->config.irq_base, | |
| &gpio_rcar_irq_domain_ops, p); | |
| if (!p->irq_domain) { | |
| ret = -ENXIO; | |
| dev_err(&pdev->dev, "cannot initialize irq domain\n"); | |
| goto err0; | |
| } | |
| if (devm_request_irq(&pdev->dev, irq->start, | |
| gpio_rcar_irq_handler, IRQF_SHARED, name, p)) { | |
| dev_err(&pdev->dev, "failed to request IRQ\n"); | |
| ret = -ENOENT; | |
| goto err1; | |
| } | |
| ret = gpiochip_add(gpio_chip); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to add GPIO controller\n"); | |
| goto err1; | |
| } | |
| dev_info(&pdev->dev, "driving %d GPIOs\n", p->config.number_of_pins); | |
| /* warn in case of mismatch if irq base is specified */ | |
| if (p->config.irq_base) { | |
| ret = irq_find_mapping(p->irq_domain, 0); | |
| if (p->config.irq_base != ret) | |
| dev_warn(&pdev->dev, "irq base mismatch (%u/%u)\n", | |
| p->config.irq_base, ret); | |
| } | |
| ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, | |
| gpio_chip->base, gpio_chip->ngpio); | |
| if (ret < 0) | |
| dev_warn(&pdev->dev, "failed to add pin range\n"); | |
| return 0; | |
| err1: | |
| irq_domain_remove(p->irq_domain); | |
| err0: | |
| return ret; | |
| } | |
| static int gpio_rcar_remove(struct platform_device *pdev) | |
| { | |
| struct gpio_rcar_priv *p = platform_get_drvdata(pdev); | |
| int ret; | |
| ret = gpiochip_remove(&p->gpio_chip); | |
| if (ret) | |
| return ret; | |
| irq_domain_remove(p->irq_domain); | |
| return 0; | |
| } | |
| static struct platform_driver gpio_rcar_device_driver = { | |
| .probe = gpio_rcar_probe, | |
| .remove = gpio_rcar_remove, | |
| .driver = { | |
| .name = "gpio_rcar", | |
| } | |
| }; | |
| module_platform_driver(gpio_rcar_device_driver); | |
| MODULE_AUTHOR("Magnus Damm"); | |
| MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); | |
| MODULE_LICENSE("GPL v2"); |