| * Freescale i.MX UART controller | |
| Required properties: | |
| - compatible : should be "fsl,imx21-uart" | |
| - reg : Address and length of the register set for the device | |
| - interrupts : Should contain UART interrupt number | |
| Optional properties: | |
| - fsl,uart-has-rtscts: indicate that RTS/CTS signals are used | |
| Note: Each uart controller should have an alias correctly numbered | |
| in "aliases" node. | |
| Example: | |
| - From imx51.dtsi: | |
| aliases { | |
| serial0 = &uart1; | |
| serial1 = &uart2; | |
| serial2 = &uart3; | |
| }; | |
| uart1: serial@73fbc000 { | |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; | |
| reg = <0x73fbc000 0x4000>; | |
| interrupts = <31>; | |
| status = "disabled"; | |
| } | |
| - From imx51-babbage.dts: | |
| uart1: serial@73fbc000 { | |
| fsl,uart-has-rtscts; | |
| status = "okay"; | |
| }; | |