| #ifndef __ASM_SPINLOCK_H |
| #define __ASM_SPINLOCK_H |
| |
| #if __LINUX_ARM_ARCH__ < 6 |
| #error SMP not supported on pre-ARMv6 CPUs |
| #endif |
| |
| #include <asm/processor.h> |
| |
| extern int msm_krait_need_wfe_fixup; |
| |
| /* |
| * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K |
| * extensions, so when running on UP, we have to patch these instructions away. |
| */ |
| #define ALT_SMP(smp, up) \ |
| "9998: " smp "\n" \ |
| " .pushsection \".alt.smp.init\", \"a\"\n" \ |
| " .long 9998b\n" \ |
| " " up "\n" \ |
| " .popsection\n" |
| |
| #ifdef CONFIG_THUMB2_KERNEL |
| #define SEV ALT_SMP("sev.w", "nop.w") |
| /* |
| * Both instructions given to the ALT_SMP macro need to be the same size, to |
| * allow the SMP_ON_UP fixups to function correctly. Hence the explicit encoding |
| * specifications. |
| */ |
| #define WFE() ALT_SMP( \ |
| "wfe.w", \ |
| "nop.w" \ |
| ) |
| #else |
| #define SEV ALT_SMP("sev", "nop") |
| #define WFE() ALT_SMP("wfe", "nop") |
| #endif |
| |
| /* |
| * The fixup involves disabling FIQs during execution of the WFE instruction. |
| * This could potentially lead to deadlock if a thread is trying to acquire a |
| * spinlock which is being released from an FIQ. This should not be a problem |
| * because FIQs are handled by the secure environment and do not directly |
| * manipulate spinlocks. |
| */ |
| #ifdef CONFIG_MSM_KRAIT_WFE_FIXUP |
| #define WFE_SAFE(fixup, tmp) \ |
| " mrs " tmp ", cpsr\n" \ |
| " cmp " fixup ", #0\n" \ |
| " wfeeq\n" \ |
| " beq 10f\n" \ |
| " cpsid f\n" \ |
| " mrc p15, 7, " fixup ", c15, c0, 5\n" \ |
| " bic " fixup ", " fixup ", #0x10000\n" \ |
| " mcr p15, 7, " fixup ", c15, c0, 5\n" \ |
| " isb\n" \ |
| " wfe\n" \ |
| " orr " fixup ", " fixup ", #0x10000\n" \ |
| " mcr p15, 7, " fixup ", c15, c0, 5\n" \ |
| " isb\n" \ |
| "10: msr cpsr_cf, " tmp "\n" |
| #else |
| #define WFE_SAFE(fixup, tmp) " wfe\n" |
| #endif |
| |
| static inline void dsb_sev(void) |
| { |
| #if __LINUX_ARM_ARCH__ >= 7 |
| __asm__ __volatile__ ( |
| "dsb\n" |
| SEV |
| ); |
| #else |
| __asm__ __volatile__ ( |
| "mcr p15, 0, %0, c7, c10, 4\n" |
| SEV |
| : : "r" (0) |
| ); |
| #endif |
| } |
| |
| /* |
| * ARMv6 ticket-based spin-locking. |
| * |
| * A memory barrier is required after we get a lock, and before we |
| * release it, because V6 CPUs are assumed to have weakly ordered |
| * memory. |
| */ |
| |
| #define arch_spin_unlock_wait(lock) \ |
| do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) |
| |
| #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) |
| |
| static inline void arch_spin_lock(arch_spinlock_t *lock) |
| { |
| unsigned long tmp, flags = 0; |
| u32 newval; |
| arch_spinlock_t lockval; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%3]\n" |
| " add %1, %0, %4\n" |
| " strex %2, %1, [%3]\n" |
| " teq %2, #0\n" |
| " bne 1b" |
| : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) |
| : "cc"); |
| |
| while (lockval.tickets.next != lockval.tickets.owner) { |
| if (msm_krait_need_wfe_fixup) { |
| local_save_flags(flags); |
| local_fiq_disable(); |
| __asm__ __volatile__( |
| "mrc p15, 7, %0, c15, c0, 5\n" |
| : "=r" (tmp) |
| : |
| : "cc"); |
| tmp &= ~(0x10000); |
| __asm__ __volatile__( |
| "mcr p15, 7, %0, c15, c0, 5\n" |
| : |
| : "r" (tmp) |
| : "cc"); |
| isb(); |
| } |
| wfe(); |
| if (msm_krait_need_wfe_fixup) { |
| tmp |= 0x10000; |
| __asm__ __volatile__( |
| "mcr p15, 7, %0, c15, c0, 5\n" |
| : |
| : "r" (tmp) |
| : "cc"); |
| isb(); |
| local_irq_restore(flags); |
| } |
| lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); |
| } |
| |
| smp_mb(); |
| } |
| |
| static inline int arch_spin_trylock(arch_spinlock_t *lock) |
| { |
| unsigned long tmp; |
| u32 slock; |
| |
| __asm__ __volatile__( |
| " ldrex %0, [%2]\n" |
| " subs %1, %0, %0, ror #16\n" |
| " addeq %0, %0, %3\n" |
| " strexeq %1, %0, [%2]" |
| : "=&r" (slock), "=&r" (tmp) |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) |
| : "cc"); |
| |
| if (tmp == 0) { |
| smp_mb(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static inline void arch_spin_unlock(arch_spinlock_t *lock) |
| { |
| smp_mb(); |
| lock->tickets.owner++; |
| dsb_sev(); |
| } |
| |
| static inline int arch_spin_is_locked(arch_spinlock_t *lock) |
| { |
| struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); |
| return tickets.owner != tickets.next; |
| } |
| |
| static inline int arch_spin_is_contended(arch_spinlock_t *lock) |
| { |
| struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets); |
| return (tickets.next - tickets.owner) > 1; |
| } |
| #define arch_spin_is_contended arch_spin_is_contended |
| |
| /* |
| * RWLOCKS |
| * |
| * |
| * Write locks are easy - we just set bit 31. When unlocking, we can |
| * just write zero since the lock is exclusively held. |
| */ |
| |
| static inline void arch_write_lock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, fixup = msm_krait_need_wfe_fixup; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%2]\n" |
| " teq %0, #0\n" |
| " beq 2f\n" |
| WFE_SAFE("%1", "%0") |
| "2:\n" |
| " strexeq %0, %3, [%2]\n" |
| " teq %0, #0\n" |
| " bne 1b" |
| : "=&r" (tmp), "+r" (fixup) |
| : "r" (&rw->lock), "r" (0x80000000) |
| : "cc"); |
| |
| smp_mb(); |
| } |
| |
| static inline int arch_write_trylock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp; |
| |
| __asm__ __volatile__( |
| " ldrex %0, [%1]\n" |
| " teq %0, #0\n" |
| " strexeq %0, %2, [%1]" |
| : "=&r" (tmp) |
| : "r" (&rw->lock), "r" (0x80000000) |
| : "cc"); |
| |
| if (tmp == 0) { |
| smp_mb(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static inline void arch_write_unlock(arch_rwlock_t *rw) |
| { |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "str %1, [%0]\n" |
| : |
| : "r" (&rw->lock), "r" (0) |
| : "cc"); |
| |
| dsb_sev(); |
| } |
| |
| /* write_can_lock - would write_trylock() succeed? */ |
| #define arch_write_can_lock(x) ((x)->lock == 0) |
| |
| /* |
| * Read locks are a bit more hairy: |
| * - Exclusively load the lock value. |
| * - Increment it. |
| * - Store new lock value if positive, and we still own this location. |
| * If the value is negative, we've already failed. |
| * - If we failed to store the value, we want a negative result. |
| * - If we failed, try again. |
| * Unlocking is similarly hairy. We may have multiple read locks |
| * currently active. However, we know we won't have any write |
| * locks. |
| */ |
| static inline void arch_read_lock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, tmp2, fixup = msm_krait_need_wfe_fixup; |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%3]\n" |
| " adds %0, %0, #1\n" |
| " strexpl %1, %0, [%3]\n" |
| " bpl 2f\n" |
| WFE_SAFE("%2", "%0") |
| "2:\n" |
| " rsbpls %0, %1, #0\n" |
| " bmi 1b" |
| : "=&r" (tmp), "=&r" (tmp2), "+r" (fixup) |
| : "r" (&rw->lock) |
| : "cc"); |
| |
| smp_mb(); |
| } |
| |
| static inline void arch_read_unlock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, tmp2; |
| |
| smp_mb(); |
| |
| __asm__ __volatile__( |
| "1: ldrex %0, [%2]\n" |
| " sub %0, %0, #1\n" |
| " strex %1, %0, [%2]\n" |
| " teq %1, #0\n" |
| " bne 1b" |
| : "=&r" (tmp), "=&r" (tmp2) |
| : "r" (&rw->lock) |
| : "cc"); |
| |
| if (tmp == 0) |
| dsb_sev(); |
| } |
| |
| static inline int arch_read_trylock(arch_rwlock_t *rw) |
| { |
| unsigned long tmp, tmp2 = 1; |
| |
| __asm__ __volatile__( |
| " ldrex %0, [%2]\n" |
| " adds %0, %0, #1\n" |
| " strexpl %1, %0, [%2]\n" |
| : "=&r" (tmp), "+r" (tmp2) |
| : "r" (&rw->lock) |
| : "cc"); |
| |
| smp_mb(); |
| return tmp2 == 0; |
| } |
| |
| /* read_can_lock - would read_trylock() succeed? */ |
| #define arch_read_can_lock(x) ((x)->lock < 0x80000000) |
| |
| #define arch_read_lock_flags(lock, flags) arch_read_lock(lock) |
| #define arch_write_lock_flags(lock, flags) arch_write_lock(lock) |
| |
| #define arch_spin_relax(lock) cpu_relax() |
| #define arch_read_relax(lock) cpu_relax() |
| #define arch_write_relax(lock) cpu_relax() |
| |
| #endif /* __ASM_SPINLOCK_H */ |