|  | /* | 
|  | * smdk_spdif.c  --  S/PDIF audio for SMDK | 
|  | * | 
|  | * Copyright 2010 Samsung Electronics Co. Ltd. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of the | 
|  | * License, or (at your option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/clk.h> | 
|  |  | 
|  | #include <plat/devs.h> | 
|  |  | 
|  | #include <sound/soc.h> | 
|  |  | 
|  | #include "s3c-dma.h" | 
|  | #include "spdif.h" | 
|  |  | 
|  | /* Audio clock settings are belonged to board specific part. Every | 
|  | * board can set audio source clock setting which is matched with H/W | 
|  | * like this function-'set_audio_clock_heirachy'. | 
|  | */ | 
|  | static int set_audio_clock_heirachy(struct platform_device *pdev) | 
|  | { | 
|  | struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif; | 
|  | int ret; | 
|  |  | 
|  | fout_epll = clk_get(NULL, "fout_epll"); | 
|  | if (IS_ERR(fout_epll)) { | 
|  | printk(KERN_WARNING "%s: Cannot find fout_epll.\n", | 
|  | __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mout_epll = clk_get(NULL, "mout_epll"); | 
|  | if (IS_ERR(mout_epll)) { | 
|  | printk(KERN_WARNING "%s: Cannot find mout_epll.\n", | 
|  | __func__); | 
|  | ret = -EINVAL; | 
|  | goto out1; | 
|  | } | 
|  |  | 
|  | sclk_audio0 = clk_get(&pdev->dev, "sclk_audio"); | 
|  | if (IS_ERR(sclk_audio0)) { | 
|  | printk(KERN_WARNING "%s: Cannot find sclk_audio.\n", | 
|  | __func__); | 
|  | ret = -EINVAL; | 
|  | goto out2; | 
|  | } | 
|  |  | 
|  | sclk_spdif = clk_get(NULL, "sclk_spdif"); | 
|  | if (IS_ERR(sclk_spdif)) { | 
|  | printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", | 
|  | __func__); | 
|  | ret = -EINVAL; | 
|  | goto out3; | 
|  | } | 
|  |  | 
|  | /* Set audio clock heirachy for S/PDIF */ | 
|  | clk_set_parent(mout_epll, fout_epll); | 
|  | clk_set_parent(sclk_audio0, mout_epll); | 
|  | clk_set_parent(sclk_spdif, sclk_audio0); | 
|  |  | 
|  | clk_put(sclk_spdif); | 
|  | out3: | 
|  | clk_put(sclk_audio0); | 
|  | out2: | 
|  | clk_put(mout_epll); | 
|  | out1: | 
|  | clk_put(fout_epll); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* We should haved to set clock directly on this part because of clock | 
|  | * scheme of Samsudng SoCs did not support to set rates from abstrct | 
|  | * clock of it's heirachy. | 
|  | */ | 
|  | static int set_audio_clock_rate(unsigned long epll_rate, | 
|  | unsigned long audio_rate) | 
|  | { | 
|  | struct clk *fout_epll, *sclk_spdif; | 
|  |  | 
|  | fout_epll = clk_get(NULL, "fout_epll"); | 
|  | if (IS_ERR(fout_epll)) { | 
|  | printk(KERN_ERR "%s: failed to get fout_epll\n", __func__); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | clk_set_rate(fout_epll, epll_rate); | 
|  | clk_put(fout_epll); | 
|  |  | 
|  | sclk_spdif = clk_get(NULL, "sclk_spdif"); | 
|  | if (IS_ERR(sclk_spdif)) { | 
|  | printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | clk_set_rate(sclk_spdif, audio_rate); | 
|  | clk_put(sclk_spdif); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int smdk_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_dai *cpu_dai = rtd->cpu_dai; | 
|  | unsigned long pll_out, rclk_rate; | 
|  | int ret, ratio; | 
|  |  | 
|  | switch (params_rate(params)) { | 
|  | case 44100: | 
|  | pll_out = 45158400; | 
|  | break; | 
|  | case 32000: | 
|  | case 48000: | 
|  | case 96000: | 
|  | pll_out = 49152000; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Setting ratio to 512fs helps to use S/PDIF with HDMI without | 
|  | * modify S/PDIF ASoC machine driver. | 
|  | */ | 
|  | ratio = 512; | 
|  | rclk_rate = params_rate(params) * ratio; | 
|  |  | 
|  | /* Set audio source clock rates */ | 
|  | ret = set_audio_clock_rate(pll_out, rclk_rate); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* Set S/PDIF uses internal source clock */ | 
|  | ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK, | 
|  | rclk_rate, SND_SOC_CLOCK_IN); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct snd_soc_ops smdk_spdif_ops = { | 
|  | .hw_params = smdk_hw_params, | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_card smdk; | 
|  |  | 
|  | static struct snd_soc_dai_link smdk_dai = { | 
|  | .name = "S/PDIF", | 
|  | .stream_name = "S/PDIF PCM Playback", | 
|  | .platform_name = "s3c24xx-pcm-audio", | 
|  | .cpu_dai_name = "samsung-spdif", | 
|  | .codec_dai_name = "dit-hifi", | 
|  | .codec_name = "spdif-dit", | 
|  | .ops = &smdk_spdif_ops, | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_card smdk = { | 
|  | .name = "SMDK-S/PDIF", | 
|  | .dai_link = &smdk_dai, | 
|  | .num_links = 1, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *smdk_snd_spdif_dit_device; | 
|  | static struct platform_device *smdk_snd_spdif_device; | 
|  |  | 
|  | static int __init smdk_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1); | 
|  | if (!smdk_snd_spdif_dit_device) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = platform_device_add(smdk_snd_spdif_dit_device); | 
|  | if (ret) | 
|  | goto err2; | 
|  |  | 
|  | smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1); | 
|  | if (!smdk_snd_spdif_device) { | 
|  | ret = -ENOMEM; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(smdk_snd_spdif_device, &smdk); | 
|  |  | 
|  | ret = platform_device_add(smdk_snd_spdif_device); | 
|  | if (ret) | 
|  | goto err1; | 
|  |  | 
|  | /* Set audio clock heirachy manually */ | 
|  | ret = set_audio_clock_heirachy(smdk_snd_spdif_device); | 
|  | if (ret) | 
|  | goto err1; | 
|  |  | 
|  | return 0; | 
|  | err1: | 
|  | platform_device_put(smdk_snd_spdif_device); | 
|  | err2: | 
|  | platform_device_put(smdk_snd_spdif_dit_device); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit smdk_exit(void) | 
|  | { | 
|  | platform_device_unregister(smdk_snd_spdif_device); | 
|  | } | 
|  |  | 
|  | module_init(smdk_init); | 
|  | module_exit(smdk_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Seungwhan Youn, <[email protected]>"); | 
|  | MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF"); | 
|  | MODULE_LICENSE("GPL"); |