en/devices/sensors/index.html - platform/docs/source.android.com - Git at Google

 <html devsite>
   <head>
     <title>Sensors</title>
     <meta name="project_path" value="/_project.yaml" />
     <meta name="book_path" value="/_book.yaml" />
   </head>
   <body>
   <!--
       Copyright 2017 The Android Open Source Project

       Licensed under the Apache License, Version 2.0 (the "License");
       you may not use this file except in compliance with the License.
       You may obtain a copy of the License at

           http://www.apache.org/licenses/LICENSE-2.0

       Unless required by applicable law or agreed to in writing, software
       distributed under the License is distributed on an "AS IS" BASIS,
       WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
       See the License for the specific language governing permissions and
       limitations under the License.
   -->


 <img style="float: right; margin: 0px 15px 15px 15px;" src="images/ape_fwk_hal_sensors.png" alt="Android Sensors HAL icon"/>

 <p>Android sensors give applications access to a mobile device's underlying physical sensors. They are data-providing virtual devices defined by <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">sensors.h</a>, the sensor Hardware Abstraction Layer (HAL).</p>

 <h2 id="what_are_“android_sensors”">What are Android sensors?</h2>
 <p>Android sensors are virtual devices that provide data coming from a set of physical sensors: accelerometers, gyroscopes, magnetometers, barometer, humidity, pressure, light, proximity and heart rate sensors.</p>
 <p>Not included in the list of physical devices providing data are camera, fingerprint sensor, microphone, and touch screen. These devices have their own reporting mechanism; the separation is arbitrary, but in general, Android sensors provide lower bandwidth data. For example, “100hz x 3 channels” for an accelerometer versus “25hz x 8 MP x 3 channels” for a camera or “44kHz x 1 channel” for a microphone.</p>
     <p>Android does not define how the different physical sensors are connected to the system on chip (SoC).</p>
     <ul>
       <li> Often, sensor chips are connected to the SoC through a <a href="sensor-stack.html#sensor_hub">sensor hub</a>, allowing some low-power monitoring and processing of the data. </li>
       <li> Often, Inter-Integrated Circuit (I2C) or Serial Peripheral Interface
         (SPI) is used as the transport mechanism. </li>
       <li> To reduce power consumption, some architectures are hierarchical, with some
 	minimal processing being done in the application-specific integrated
 	circuit (ASIC - like motion detection on the accelerometer chip), and
         more is done in a microcontroller (like step detection
         in a sensor hub). </li>
       <li> It is up to the device manufacturer to choose an architecture based on
 	accuracy, power, price and package-size characteristics. See <a
         href="sensor-stack.html">Sensor stack</a> for more information. </li>
       <li> Batching capabilities are an important consideration for power optimization.
         See <a href="batching.html">Batching</a> for more information. </li>
     </ul>
     <p>Each Android sensor has a “type” representing how the sensor behaves and what
       data it provides.</p>
     <ul>
       <li> The official Android <a href="sensor-types.html">Sensor types</a> are defined in <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">sensors.h</a> under the names SENSOR_TYPE_…
         <ul>
           <li> The vast majority of sensors have an official sensor type. </li>
           <li> Those types are documented in the Android SDK. </li>
 	  <li> Behavior of sensors with those types are tested in the Android
                Compatibility Test Suite (CTS). </li>
         </ul>
       </li>
       <li> If a manufacturer integrates a new kind of sensor on an Android device, the
         manufacturer can define its own temporary type to refer to it.
         <ul>
           <li> Those types are undocumented, so application developers are unlikely to use
             them, either because they don’t know about them, or know that they are rarely
             present (only on some devices from this specific manufacturer). </li>
           <li> They are not tested by CTS. </li>
 	  <li> Once Android defines an official sensor type for this kind of
 	       sensor, manufacturers must stop using their own temporary type
 	       and use the official type instead. This way, the sensor will be
                used by more application developers. </li>
         </ul>
       </li>
       <li> The list of all sensors present on the device is reported by the HAL
         implementation.
         <ul>
           <li> There can be several sensors of the same type. For example, two proximity
             sensors or two accelerometers. </li>
           <li> The vast majority of applications request only a single sensor of a given type.
             For example, an application requesting the default accelerometer will get the
             first accelerometer in the list. </li>
           <li> Sensors are often defined by <a href="suspend-mode.html#wake-up_sensors">wake-up</a> and <a href="suspend-mode.html#non-wake-up_sensors">non-wake-up</a> pairs, both sensors sharing the same type, but differing by their wake-up
             characteristic. </li>
         </ul>
       </li>
     </ul>
 <p>Android sensors provide data as a series of sensor events.</p>
       <p> Each <a href="hal-interface.html#sensors_event_t">event</a> contains:</p>
         <ul>
           <li> a handle to the sensor that generated it </li>
           <li> the timestamp at which the event was detected or measured </li>
           <li> and some data </li>
         </ul>
       <p>The interpretation of the reported data depends on the sensor type.
           See the <a href="sensor-types.html">sensor type</a> definitions for details on
           what data is reported for each sensor type.</p>

 <h2 id="existing_documentation2">Existing documentation</h2>
     <h3 id="targeted_at_developers">Targeted at developers</h3>
     <ul>
       <li> Overview
         <ul>
           <li><a href="https://developer.android.com/guide/topics/sensors/sensors_overview.html"> https://developer.android.com/guide/topics/sensors/sensors_overview.html </a></li>
         </ul>
       </li>
       <li> SDK reference
         <ul>
           <li> <a href="https://developer.android.com/reference/android/hardware/SensorManager.html">https://developer.android.com/reference/android/hardware/SensorManager.html</a></li>
           <li><a href="https://developer.android.com/reference/android/hardware/SensorEventListener.html"> https://developer.android.com/reference/android/hardware/SensorEventListener.html</a></li>
           <li> <a href="https://developer.android.com/reference/android/hardware/SensorEvent.html">https://developer.android.com/reference/android/hardware/SensorEvent.html</a></li>
           <li><a href="https://developer.android.com/reference/android/hardware/Sensor.html"> https://developer.android.com/reference/android/hardware/Sensor.html</a></li>
         </ul>
       </li>
       <li> StackOverflow and tutorial websites
         <ul>
           <li> Because sensors documentation was sometimes lacking, developers resorted to Q&amp;A
             websites like StackOverflow to find answers. </li>
           <li> Some tutorial websites exist as well, but do not cover the latest features like
             batching, significant motion and game rotation vectors. </li>
           <li> The answers over there are not always right, and show where more documentation
             is needed. </li>
         </ul>
       </li>
     </ul>
 <h3 id="targeted_at_manufacturers_public">Targeted at manufacturers</h3>
     <ul>
       <li> Overview
         <ul>
 	  <li>This <a href="/devices/sensors/index.html">Sensors</a>
             page and its sub-pages. </li>
         </ul>
       </li>
       <li> Hardware abstraction layer (HAL)
         <ul>
           <li> <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h</a></li>
           <li> Also known as “sensors.h” </li>
           <li> The source of truth. First document to be updated when new features are
             developed. </li>
         </ul>
       </li>
       <li> Android CDD (Compatibility Definition Document)
         <ul>
           <li><a href="/compatibility/android-cdd.pdf">https://source.android.com/compatibility/android-cdd.pdf</a></li>
           <li> See sections relative to sensors. </li>
           <li> The CDD is lenient, so satisfying the CDD requirements is not enough to ensure
             high quality sensors. </li>
         </ul>
       </li>
     </ul>

   </body>
 </html>
	<html devsite>
	<head>
	<title>Sensors</title>
	<meta name="project_path" value="/_project.yaml" />
	<meta name="book_path" value="/_book.yaml" />
	</head>
	<body>
	<!--
	Copyright 2017 The Android Open Source Project

	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	-->


	<img style="float: right; margin: 0px 15px 15px 15px;" src="images/ape_fwk_hal_sensors.png" alt="Android Sensors HAL icon"/>

	<p>Android sensors give applications access to a mobile device's underlying physical sensors. They are data-providing virtual devices defined by <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">sensors.h</a>, the sensor Hardware Abstraction Layer (HAL).</p>

	<h2 id="what_are_“android_sensors”">What are Android sensors?</h2>
	<p>Android sensors are virtual devices that provide data coming from a set of physical sensors: accelerometers, gyroscopes, magnetometers, barometer, humidity, pressure, light, proximity and heart rate sensors.</p>
	<p>Not included in the list of physical devices providing data are camera, fingerprint sensor, microphone, and touch screen. These devices have their own reporting mechanism; the separation is arbitrary, but in general, Android sensors provide lower bandwidth data. For example, “100hz x 3 channels” for an accelerometer versus “25hz x 8 MP x 3 channels” for a camera or “44kHz x 1 channel” for a microphone.</p>
	<p>Android does not define how the different physical sensors are connected to the system on chip (SoC).</p>
	<ul>
	<li> Often, sensor chips are connected to the SoC through a <a href="sensor-stack.html#sensor_hub">sensor hub</a>, allowing some low-power monitoring and processing of the data. </li>
	<li> Often, Inter-Integrated Circuit (I2C) or Serial Peripheral Interface
	(SPI) is used as the transport mechanism. </li>
	<li> To reduce power consumption, some architectures are hierarchical, with some
	minimal processing being done in the application-specific integrated
	circuit (ASIC - like motion detection on the accelerometer chip), and
	more is done in a microcontroller (like step detection
	in a sensor hub). </li>
	<li> It is up to the device manufacturer to choose an architecture based on
	accuracy, power, price and package-size characteristics. See <a
	href="sensor-stack.html">Sensor stack</a> for more information. </li>
	<li> Batching capabilities are an important consideration for power optimization.
	See <a href="batching.html">Batching</a> for more information. </li>
	</ul>
	<p>Each Android sensor has a “type” representing how the sensor behaves and what
	data it provides.</p>
	<ul>
	<li> The official Android <a href="sensor-types.html">Sensor types</a> are defined in <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">sensors.h</a> under the names SENSOR_TYPE_…
	<ul>
	<li> The vast majority of sensors have an official sensor type. </li>
	<li> Those types are documented in the Android SDK. </li>
	<li> Behavior of sensors with those types are tested in the Android
	Compatibility Test Suite (CTS). </li>
	</ul>
	</li>
	<li> If a manufacturer integrates a new kind of sensor on an Android device, the
	manufacturer can define its own temporary type to refer to it.
	<ul>
	<li> Those types are undocumented, so application developers are unlikely to use
	them, either because they don’t know about them, or know that they are rarely
	present (only on some devices from this specific manufacturer). </li>
	<li> They are not tested by CTS. </li>
	<li> Once Android defines an official sensor type for this kind of
	sensor, manufacturers must stop using their own temporary type
	and use the official type instead. This way, the sensor will be
	used by more application developers. </li>
	</ul>
	</li>
	<li> The list of all sensors present on the device is reported by the HAL
	implementation.
	<ul>
	<li> There can be several sensors of the same type. For example, two proximity
	sensors or two accelerometers. </li>
	<li> The vast majority of applications request only a single sensor of a given type.
	For example, an application requesting the default accelerometer will get the
	first accelerometer in the list. </li>
	<li> Sensors are often defined by <a href="suspend-mode.html#wake-up_sensors">wake-up</a> and <a href="suspend-mode.html#non-wake-up_sensors">non-wake-up</a> pairs, both sensors sharing the same type, but differing by their wake-up
	characteristic. </li>
	</ul>
	</li>
	</ul>
	<p>Android sensors provide data as a series of sensor events.</p>
	<p> Each <a href="hal-interface.html#sensors_event_t">event</a> contains:</p>
	<ul>
	<li> a handle to the sensor that generated it </li>
	<li> the timestamp at which the event was detected or measured </li>
	<li> and some data </li>
	</ul>
	<p>The interpretation of the reported data depends on the sensor type.
	See the <a href="sensor-types.html">sensor type</a> definitions for details on
	what data is reported for each sensor type.</p>

	<h2 id="existing_documentation2">Existing documentation</h2>
	<h3 id="targeted_at_developers">Targeted at developers</h3>
	<ul>
	<li> Overview
	<ul>
	<li><a href="https://developer.android.com/guide/topics/sensors/sensors_overview.html"> https://developer.android.com/guide/topics/sensors/sensors_overview.html </a></li>
	</ul>
	</li>
	<li> SDK reference
	<ul>
	<li> <a href="https://developer.android.com/reference/android/hardware/SensorManager.html">https://developer.android.com/reference/android/hardware/SensorManager.html</a></li>
	<li><a href="https://developer.android.com/reference/android/hardware/SensorEventListener.html"> https://developer.android.com/reference/android/hardware/SensorEventListener.html</a></li>
	<li> <a href="https://developer.android.com/reference/android/hardware/SensorEvent.html">https://developer.android.com/reference/android/hardware/SensorEvent.html</a></li>
	<li><a href="https://developer.android.com/reference/android/hardware/Sensor.html"> https://developer.android.com/reference/android/hardware/Sensor.html</a></li>
	</ul>
	</li>
	<li> StackOverflow and tutorial websites
	<ul>
	<li> Because sensors documentation was sometimes lacking, developers resorted to Q&A
	websites like StackOverflow to find answers. </li>
	<li> Some tutorial websites exist as well, but do not cover the latest features like
	batching, significant motion and game rotation vectors. </li>
	<li> The answers over there are not always right, and show where more documentation
	is needed. </li>
	</ul>
	</li>
	</ul>
	<h3 id="targeted_at_manufacturers_public">Targeted at manufacturers</h3>
	<ul>
	<li> Overview
	<ul>
	<li>This <a href="/devices/sensors/index.html">Sensors</a>
	page and its sub-pages. </li>
	</ul>
	</li>
	<li> Hardware abstraction layer (HAL)
	<ul>
	<li> <a href="https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h">https://android.googlesource.com/platform/hardware/libhardware/+/master/include/hardware/sensors.h</a></li>
	<li> Also known as “sensors.h” </li>
	<li> The source of truth. First document to be updated when new features are
	developed. </li>
	</ul>
	</li>
	<li> Android CDD (Compatibility Definition Document)
	<ul>
	<li><a href="/compatibility/android-cdd.pdf">https://source.android.com/compatibility/android-cdd.pdf</a></li>
	<li> See sections relative to sensors. </li>
	<li> The CDD is lenient, so satisfying the CDD requirements is not enough to ensure
	high quality sensors. </li>
	</ul>
	</li>
	</ul>

	</body>
	</html>