| # Copyright (c) 2020 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| |
| from autotest_lib.client.common_lib import global_config |
| _CONFIG = global_config.global_config |
| |
| # Names of the host attributes in the database that represent the values for |
| # the servo_host and servo_port for a servo connected to the DUT. |
| SERVO_HOST_ATTR = 'servo_host' |
| SERVO_PORT_ATTR = 'servo_port' |
| SERVO_BOARD_ATTR = 'servo_board' |
| # Model is inferred from host labels. |
| SERVO_MODEL_ATTR = 'servo_model' |
| SERVO_SERIAL_ATTR = 'servo_serial' |
| # Indicates what type of servo setup, example value: REGULAR or DUAL_V4. |
| SERVO_SETUP_ATTR = 'servo_setup' |
| SERVO_SETUP_VALUE_DUAL_V4 = 'DUAL_V4' |
| SERVO_ATTR_KEYS = ( |
| SERVO_BOARD_ATTR, |
| SERVO_HOST_ATTR, |
| SERVO_PORT_ATTR, |
| SERVO_SERIAL_ATTR, |
| SERVO_SETUP_ATTR, |
| ) |
| |
| # Additional args that will be appended to servod start command. |
| ADDITIONAL_SERVOD_ARGS = 'additional_servod_args' |
| |
| # Timeout value for stop/start servod process. |
| SERVOD_TEARDOWN_TIMEOUT = 3 |
| SERVOD_QUICK_STARTUP_TIMEOUT = 20 |
| SERVOD_STARTUP_TIMEOUT = 60 |
| |
| # Prefix of pools that require servod cr50 config. |
| CR50_CONFIG_POOL_PREFIX = 'faft-cr50' |
| |
| ENABLE_SSH_TUNNEL_FOR_SERVO = _CONFIG.get_config_value( |
| 'CROS', 'enable_ssh_tunnel_for_servo', type=bool, default=False) |
| |
| SERVO_TYPE_LABEL_PREFIX = 'servo_type' |
| SERVO_STATE_LABEL_PREFIX = 'servo_state' |
| |
| # constants to support whole list of states for servo |
| SERVO_STATE_UNKNOWN = 'UNKNOWN' |
| SERVO_STATE_MISSING_CONFIG = 'MISSING_CONFIG' |
| SERVO_STATE_WRONG_CONFIG = 'WRONG_CONFIG' |
| SERVO_STATE_NO_SSH = 'NO_SSH' |
| SERVO_STATE_NOT_CONNECTED = 'NOT_CONNECTED' |
| SERVO_STATE_NEED_REPLACEMENT = 'NEED_REPLACEMENT' |
| SERVO_STATE_CR50_CONSOLE_MISSING = 'CR50_CONSOLE_MISSING' |
| SERVO_STATE_CCD_TESTLAB_ISSUE = 'CCD_TESTLAB_ISSUE' |
| SERVO_STATE_SERVOD_ISSUE = 'SERVOD_ISSUE' |
| SERVO_STATE_LID_OPEN_FAILED = 'LID_OPEN_FAILED' |
| SERVO_STATE_BAD_RIBBON_CABLE = 'BAD_RIBBON_CABLE' |
| SERVO_STATE_TOPOLOGY_ISSUE = 'TOPOLOGY_ISSUE' |
| SERVO_STATE_DUT_NOT_CONNECTED = 'DUT_NOT_CONNECTED' |
| SERVO_STATE_EC_BROKEN = 'EC_BROKEN' |
| SERVO_STATE_BROKEN = 'BROKEN' |
| SERVO_STATE_WORKING = 'WORKING' |
| |
| # constants to support reset servo via smart usbhub. |
| SMART_USBHUB_LABEL = 'smart_usbhub' |
| SERVO_RESET_TIMEOUT_SECONDS = 20 |
| ERROR_MESSAGE_USB_HUB_NOT_COMPATIBLE = ('Be sure the hub is a supported' |
| ' smart hub') |
| # a servo serial number should be fed to this constant |
| ERROR_MESSAGE_DEVICE_NOT_FOUND = 'Device with serial \'%s\' not found.' |
