| This example shows a unique way to use a BPF program to demux any ethernet |
| traffic into a pool of worker veth+namespaces (or any ifindex-based |
| destination) depending on a configurable mapping of src-mac to ifindex. As |
| part of the ingress processing, the program will dynamically learn the source |
| ifindex of the matched source mac. |
| |
| Simulate a physical network with a vlan aware switch and clients that may |
| connect to any vlan. The program will detect the known clients and pass the |
| traffic through to a dedicated namespace for processing. Clients may have |
| overlapping IP spaces and the traffic will still work. |
| |
| | bpf program | |
| cli0 --| | /--|-- worker0 | |
| cli1 --| trunk | +->--->-handle_p2v(pkt)-> /---|-- worker1 | |
| cli2 --|=======|=+ /----|-- worker2 | |
| ... --| | +-<---<-handle_v2p(pkt)-<-----|-- ... | |
| cliN --| | \----|-- workerM | |
| | | ^ | |
| phys | veth | |
| switch | | |
| |
| To run the example, simply: |
| |
| sudo /path/to/vlan_learning/vlan_learning.py |
| |
| Serving HTTP on 0.0.0.0 port 80 ... |
| Serving HTTP on 0.0.0.0 port 80 ... |
| Serving HTTP on 0.0.0.0 port 80 ... |
| % Total % Received % Xferd Average Speed Time Time Time Current |
| Dload Upload Total Spent Left Speed |
| 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0172.16.1.100 - - [04/Nov/2015 10:54:47] "GET / HTTP/1.1" 200 - |
| 100 574 100 574 0 0 45580 0 --:--:-- --:--:-- --:--:-- 47833 |
| |
| ... |
| |
| Press enter to exit: |
| mac 020000000000 rx pkts = 95, rx bytes = 7022 |
| tx pkts = 0, tx bytes = 0 |
| mac 020000000001 rx pkts = 95, rx bytes = 7022 |
| tx pkts = 0, tx bytes = 0 |
| mac 020000000002 rx pkts = 97, rx bytes = 7154 |
| tx pkts = 0, tx bytes = 0 |
| |
