| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 1998 - 2021, Daniel Stenberg, <[email protected]>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at https://curl.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ***************************************************************************/ |
| |
| /* |
| * Source file for all GnuTLS-specific code for the TLS/SSL layer. No code |
| * but vtls.c should ever call or use these functions. |
| * |
| * Note: don't use the GnuTLS' *_t variable type names in this source code, |
| * since they were not present in 1.0.X. |
| */ |
| |
| #include "curl_setup.h" |
| |
| #ifdef USE_GNUTLS |
| |
| #include <gnutls/abstract.h> |
| #include <gnutls/gnutls.h> |
| #include <gnutls/x509.h> |
| #include <gnutls/crypto.h> |
| #include <nettle/sha2.h> |
| |
| #include "urldata.h" |
| #include "sendf.h" |
| #include "inet_pton.h" |
| #include "gtls.h" |
| #include "vtls.h" |
| #include "parsedate.h" |
| #include "connect.h" /* for the connect timeout */ |
| #include "select.h" |
| #include "strcase.h" |
| #include "warnless.h" |
| #include "x509asn1.h" |
| #include "multiif.h" |
| #include "curl_printf.h" |
| #include "curl_memory.h" |
| /* The last #include file should be: */ |
| #include "memdebug.h" |
| |
| /* Enable GnuTLS debugging by defining GTLSDEBUG */ |
| /*#define GTLSDEBUG */ |
| |
| #ifdef GTLSDEBUG |
| static void tls_log_func(int level, const char *str) |
| { |
| fprintf(stderr, "|<%d>| %s", level, str); |
| } |
| #endif |
| static bool gtls_inited = FALSE; |
| |
| #if !defined(GNUTLS_VERSION_NUMBER) || (GNUTLS_VERSION_NUMBER < 0x03010a) |
| #error "too old GnuTLS version" |
| #endif |
| |
| # include <gnutls/ocsp.h> |
| |
| struct ssl_backend_data { |
| gnutls_session_t session; |
| gnutls_certificate_credentials_t cred; |
| #ifdef HAVE_GNUTLS_SRP |
| gnutls_srp_client_credentials_t srp_client_cred; |
| #endif |
| }; |
| |
| static ssize_t gtls_push(void *s, const void *buf, size_t len) |
| { |
| curl_socket_t sock = *(curl_socket_t *)s; |
| ssize_t ret = swrite(sock, buf, len); |
| return ret; |
| } |
| |
| static ssize_t gtls_pull(void *s, void *buf, size_t len) |
| { |
| curl_socket_t sock = *(curl_socket_t *)s; |
| ssize_t ret = sread(sock, buf, len); |
| return ret; |
| } |
| |
| static ssize_t gtls_push_ssl(void *s, const void *buf, size_t len) |
| { |
| return gnutls_record_send((gnutls_session_t) s, buf, len); |
| } |
| |
| static ssize_t gtls_pull_ssl(void *s, void *buf, size_t len) |
| { |
| return gnutls_record_recv((gnutls_session_t) s, buf, len); |
| } |
| |
| /* gtls_init() |
| * |
| * Global GnuTLS init, called from Curl_ssl_init(). This calls functions that |
| * are not thread-safe and thus this function itself is not thread-safe and |
| * must only be called from within curl_global_init() to keep the thread |
| * situation under control! |
| */ |
| static int gtls_init(void) |
| { |
| int ret = 1; |
| if(!gtls_inited) { |
| ret = gnutls_global_init()?0:1; |
| #ifdef GTLSDEBUG |
| gnutls_global_set_log_function(tls_log_func); |
| gnutls_global_set_log_level(2); |
| #endif |
| gtls_inited = TRUE; |
| } |
| return ret; |
| } |
| |
| static void gtls_cleanup(void) |
| { |
| if(gtls_inited) { |
| gnutls_global_deinit(); |
| gtls_inited = FALSE; |
| } |
| } |
| |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| static void showtime(struct Curl_easy *data, |
| const char *text, |
| time_t stamp) |
| { |
| struct tm buffer; |
| const struct tm *tm = &buffer; |
| char str[96]; |
| CURLcode result = Curl_gmtime(stamp, &buffer); |
| if(result) |
| return; |
| |
| msnprintf(str, |
| sizeof(str), |
| " %s: %s, %02d %s %4d %02d:%02d:%02d GMT", |
| text, |
| Curl_wkday[tm->tm_wday?tm->tm_wday-1:6], |
| tm->tm_mday, |
| Curl_month[tm->tm_mon], |
| tm->tm_year + 1900, |
| tm->tm_hour, |
| tm->tm_min, |
| tm->tm_sec); |
| infof(data, "%s", str); |
| } |
| #endif |
| |
| static gnutls_datum_t load_file(const char *file) |
| { |
| FILE *f; |
| gnutls_datum_t loaded_file = { NULL, 0 }; |
| long filelen; |
| void *ptr; |
| |
| f = fopen(file, "rb"); |
| if(!f) |
| return loaded_file; |
| if(fseek(f, 0, SEEK_END) != 0 |
| || (filelen = ftell(f)) < 0 |
| || fseek(f, 0, SEEK_SET) != 0 |
| || !(ptr = malloc((size_t)filelen))) |
| goto out; |
| if(fread(ptr, 1, (size_t)filelen, f) < (size_t)filelen) { |
| free(ptr); |
| goto out; |
| } |
| |
| loaded_file.data = ptr; |
| loaded_file.size = (unsigned int)filelen; |
| out: |
| fclose(f); |
| return loaded_file; |
| } |
| |
| static void unload_file(gnutls_datum_t data) |
| { |
| free(data.data); |
| } |
| |
| |
| /* this function does a SSL/TLS (re-)handshake */ |
| static CURLcode handshake(struct Curl_easy *data, |
| struct connectdata *conn, |
| int sockindex, |
| bool duringconnect, |
| bool nonblocking) |
| { |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| struct ssl_backend_data *backend = connssl->backend; |
| gnutls_session_t session = backend->session; |
| curl_socket_t sockfd = conn->sock[sockindex]; |
| |
| for(;;) { |
| timediff_t timeout_ms; |
| int rc; |
| |
| /* check allowed time left */ |
| timeout_ms = Curl_timeleft(data, NULL, duringconnect); |
| |
| if(timeout_ms < 0) { |
| /* no need to continue if time already is up */ |
| failf(data, "SSL connection timeout"); |
| return CURLE_OPERATION_TIMEDOUT; |
| } |
| |
| /* if ssl is expecting something, check if it's available. */ |
| if(connssl->connecting_state == ssl_connect_2_reading |
| || connssl->connecting_state == ssl_connect_2_writing) { |
| int what; |
| curl_socket_t writefd = ssl_connect_2_writing == |
| connssl->connecting_state?sockfd:CURL_SOCKET_BAD; |
| curl_socket_t readfd = ssl_connect_2_reading == |
| connssl->connecting_state?sockfd:CURL_SOCKET_BAD; |
| |
| what = Curl_socket_check(readfd, CURL_SOCKET_BAD, writefd, |
| nonblocking?0: |
| timeout_ms?timeout_ms:1000); |
| if(what < 0) { |
| /* fatal error */ |
| failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else if(0 == what) { |
| if(nonblocking) |
| return CURLE_OK; |
| else if(timeout_ms) { |
| /* timeout */ |
| failf(data, "SSL connection timeout at %ld", (long)timeout_ms); |
| return CURLE_OPERATION_TIMEDOUT; |
| } |
| } |
| /* socket is readable or writable */ |
| } |
| |
| rc = gnutls_handshake(session); |
| |
| if((rc == GNUTLS_E_AGAIN) || (rc == GNUTLS_E_INTERRUPTED)) { |
| connssl->connecting_state = |
| gnutls_record_get_direction(session)? |
| ssl_connect_2_writing:ssl_connect_2_reading; |
| continue; |
| } |
| else if((rc < 0) && !gnutls_error_is_fatal(rc)) { |
| const char *strerr = NULL; |
| |
| if(rc == GNUTLS_E_WARNING_ALERT_RECEIVED) { |
| int alert = gnutls_alert_get(session); |
| strerr = gnutls_alert_get_name(alert); |
| } |
| |
| if(!strerr) |
| strerr = gnutls_strerror(rc); |
| |
| infof(data, "gnutls_handshake() warning: %s", strerr); |
| continue; |
| } |
| else if(rc < 0) { |
| const char *strerr = NULL; |
| |
| if(rc == GNUTLS_E_FATAL_ALERT_RECEIVED) { |
| int alert = gnutls_alert_get(session); |
| strerr = gnutls_alert_get_name(alert); |
| } |
| |
| if(!strerr) |
| strerr = gnutls_strerror(rc); |
| |
| failf(data, "gnutls_handshake() failed: %s", strerr); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| /* Reset our connect state machine */ |
| connssl->connecting_state = ssl_connect_1; |
| return CURLE_OK; |
| } |
| } |
| |
| static gnutls_x509_crt_fmt_t do_file_type(const char *type) |
| { |
| if(!type || !type[0]) |
| return GNUTLS_X509_FMT_PEM; |
| if(strcasecompare(type, "PEM")) |
| return GNUTLS_X509_FMT_PEM; |
| if(strcasecompare(type, "DER")) |
| return GNUTLS_X509_FMT_DER; |
| return GNUTLS_X509_FMT_PEM; /* default to PEM */ |
| } |
| |
| #define GNUTLS_CIPHERS "NORMAL:-ARCFOUR-128:-CTYPE-ALL:+CTYPE-X509" |
| /* If GnuTLS was compiled without support for SRP it will error out if SRP is |
| requested in the priority string, so treat it specially |
| */ |
| #define GNUTLS_SRP "+SRP" |
| |
| static CURLcode |
| set_ssl_version_min_max(struct Curl_easy *data, |
| const char **prioritylist, |
| const char *tls13support) |
| { |
| struct connectdata *conn = data->conn; |
| long ssl_version = SSL_CONN_CONFIG(version); |
| long ssl_version_max = SSL_CONN_CONFIG(version_max); |
| |
| if((ssl_version == CURL_SSLVERSION_DEFAULT) || |
| (ssl_version == CURL_SSLVERSION_TLSv1)) |
| ssl_version = CURL_SSLVERSION_TLSv1_0; |
| if(ssl_version_max == CURL_SSLVERSION_MAX_NONE) |
| ssl_version_max = CURL_SSLVERSION_MAX_DEFAULT; |
| if(!tls13support) { |
| /* If the running GnuTLS doesn't support TLS 1.3, we must not specify a |
| prioritylist involving that since it will make GnuTLS return an en |
| error back at us */ |
| if((ssl_version_max == CURL_SSLVERSION_MAX_TLSv1_3) || |
| (ssl_version_max == CURL_SSLVERSION_MAX_DEFAULT)) { |
| ssl_version_max = CURL_SSLVERSION_MAX_TLSv1_2; |
| } |
| } |
| else if(ssl_version_max == CURL_SSLVERSION_MAX_DEFAULT) { |
| ssl_version_max = CURL_SSLVERSION_MAX_TLSv1_3; |
| } |
| |
| switch(ssl_version | ssl_version_max) { |
| case CURL_SSLVERSION_TLSv1_0 | CURL_SSLVERSION_MAX_TLSv1_0: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.0"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_0 | CURL_SSLVERSION_MAX_TLSv1_1: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.1:+VERS-TLS1.0"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_0 | CURL_SSLVERSION_MAX_TLSv1_2: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.2:+VERS-TLS1.1:+VERS-TLS1.0"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_1 | CURL_SSLVERSION_MAX_TLSv1_1: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.1"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_1 | CURL_SSLVERSION_MAX_TLSv1_2: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.2:+VERS-TLS1.1"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_2 | CURL_SSLVERSION_MAX_TLSv1_2: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.2"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_3 | CURL_SSLVERSION_MAX_TLSv1_3: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.3"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_0 | CURL_SSLVERSION_MAX_TLSv1_3: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_1 | CURL_SSLVERSION_MAX_TLSv1_3: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.3:+VERS-TLS1.2:+VERS-TLS1.1"; |
| return CURLE_OK; |
| case CURL_SSLVERSION_TLSv1_2 | CURL_SSLVERSION_MAX_TLSv1_3: |
| *prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:" |
| "+VERS-TLS1.3:+VERS-TLS1.2"; |
| return CURLE_OK; |
| } |
| |
| failf(data, "GnuTLS: cannot set ssl protocol"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| static CURLcode |
| gtls_connect_step1(struct Curl_easy *data, |
| struct connectdata *conn, |
| int sockindex) |
| { |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| struct ssl_backend_data *backend = connssl->backend; |
| unsigned int init_flags; |
| gnutls_session_t session; |
| int rc; |
| bool sni = TRUE; /* default is SNI enabled */ |
| void *transport_ptr = NULL; |
| gnutls_push_func gnutls_transport_push = NULL; |
| gnutls_pull_func gnutls_transport_pull = NULL; |
| #ifdef ENABLE_IPV6 |
| struct in6_addr addr; |
| #else |
| struct in_addr addr; |
| #endif |
| const char *prioritylist; |
| const char *err = NULL; |
| const char * const hostname = SSL_HOST_NAME(); |
| long * const certverifyresult = &SSL_SET_OPTION_LVALUE(certverifyresult); |
| const char *tls13support; |
| |
| if(connssl->state == ssl_connection_complete) |
| /* to make us tolerant against being called more than once for the |
| same connection */ |
| return CURLE_OK; |
| |
| if(!gtls_inited) |
| gtls_init(); |
| |
| /* Initialize certverifyresult to OK */ |
| *certverifyresult = 0; |
| |
| if(SSL_CONN_CONFIG(version) == CURL_SSLVERSION_SSLv2) { |
| failf(data, "GnuTLS does not support SSLv2"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else if(SSL_CONN_CONFIG(version) == CURL_SSLVERSION_SSLv3) |
| sni = FALSE; /* SSLv3 has no SNI */ |
| |
| /* allocate a cred struct */ |
| rc = gnutls_certificate_allocate_credentials(&backend->cred); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_cert_all_cred() failed: %s", gnutls_strerror(rc)); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| #ifdef HAVE_GNUTLS_SRP |
| if(SSL_SET_OPTION(authtype) == CURL_TLSAUTH_SRP) { |
| infof(data, "Using TLS-SRP username: %s", SSL_SET_OPTION(username)); |
| |
| rc = gnutls_srp_allocate_client_credentials( |
| &backend->srp_client_cred); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_srp_allocate_client_cred() failed: %s", |
| gnutls_strerror(rc)); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| rc = gnutls_srp_set_client_credentials(backend->srp_client_cred, |
| SSL_SET_OPTION(username), |
| SSL_SET_OPTION(password)); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_srp_set_client_cred() failed: %s", |
| gnutls_strerror(rc)); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| } |
| #endif |
| |
| if(SSL_CONN_CONFIG(CAfile)) { |
| /* set the trusted CA cert bundle file */ |
| gnutls_certificate_set_verify_flags(backend->cred, |
| GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT); |
| |
| rc = gnutls_certificate_set_x509_trust_file(backend->cred, |
| SSL_CONN_CONFIG(CAfile), |
| GNUTLS_X509_FMT_PEM); |
| if(rc < 0) { |
| infof(data, "error reading ca cert file %s (%s)", |
| SSL_CONN_CONFIG(CAfile), gnutls_strerror(rc)); |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| *certverifyresult = rc; |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| } |
| else |
| infof(data, "found %d certificates in %s", rc, |
| SSL_CONN_CONFIG(CAfile)); |
| } |
| |
| if(SSL_CONN_CONFIG(CApath)) { |
| /* set the trusted CA cert directory */ |
| rc = gnutls_certificate_set_x509_trust_dir(backend->cred, |
| SSL_CONN_CONFIG(CApath), |
| GNUTLS_X509_FMT_PEM); |
| if(rc < 0) { |
| infof(data, "error reading ca cert file %s (%s)", |
| SSL_CONN_CONFIG(CApath), gnutls_strerror(rc)); |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| *certverifyresult = rc; |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| } |
| else |
| infof(data, "found %d certificates in %s", |
| rc, SSL_CONN_CONFIG(CApath)); |
| } |
| |
| #ifdef CURL_CA_FALLBACK |
| /* use system ca certificate store as fallback */ |
| if(SSL_CONN_CONFIG(verifypeer) && |
| !(SSL_CONN_CONFIG(CAfile) || SSL_CONN_CONFIG(CApath))) { |
| gnutls_certificate_set_x509_system_trust(backend->cred); |
| } |
| #endif |
| |
| if(SSL_SET_OPTION(CRLfile)) { |
| /* set the CRL list file */ |
| rc = gnutls_certificate_set_x509_crl_file(backend->cred, |
| SSL_SET_OPTION(CRLfile), |
| GNUTLS_X509_FMT_PEM); |
| if(rc < 0) { |
| failf(data, "error reading crl file %s (%s)", |
| SSL_SET_OPTION(CRLfile), gnutls_strerror(rc)); |
| return CURLE_SSL_CRL_BADFILE; |
| } |
| else |
| infof(data, "found %d CRL in %s", |
| rc, SSL_SET_OPTION(CRLfile)); |
| } |
| |
| /* Initialize TLS session as a client */ |
| init_flags = GNUTLS_CLIENT; |
| |
| #if defined(GNUTLS_FORCE_CLIENT_CERT) |
| init_flags |= GNUTLS_FORCE_CLIENT_CERT; |
| #endif |
| |
| #if defined(GNUTLS_NO_TICKETS) |
| /* Disable TLS session tickets */ |
| init_flags |= GNUTLS_NO_TICKETS; |
| #endif |
| |
| rc = gnutls_init(&backend->session, init_flags); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_init() failed: %d", rc); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| /* convenient assign */ |
| session = backend->session; |
| |
| if((0 == Curl_inet_pton(AF_INET, hostname, &addr)) && |
| #ifdef ENABLE_IPV6 |
| (0 == Curl_inet_pton(AF_INET6, hostname, &addr)) && |
| #endif |
| sni && |
| (gnutls_server_name_set(session, GNUTLS_NAME_DNS, hostname, |
| strlen(hostname)) < 0)) |
| infof(data, "WARNING: failed to configure server name indication (SNI) " |
| "TLS extension"); |
| |
| /* Use default priorities */ |
| rc = gnutls_set_default_priority(session); |
| if(rc != GNUTLS_E_SUCCESS) |
| return CURLE_SSL_CONNECT_ERROR; |
| |
| /* "In GnuTLS 3.6.5, TLS 1.3 is enabled by default" */ |
| tls13support = gnutls_check_version("3.6.5"); |
| |
| /* Ensure +SRP comes at the *end* of all relevant strings so that it can be |
| * removed if a run-time error indicates that SRP is not supported by this |
| * GnuTLS version */ |
| switch(SSL_CONN_CONFIG(version)) { |
| case CURL_SSLVERSION_TLSv1_3: |
| if(!tls13support) { |
| failf(data, "This GnuTLS installation does not support TLS 1.3"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| /* FALLTHROUGH */ |
| case CURL_SSLVERSION_DEFAULT: |
| case CURL_SSLVERSION_TLSv1: |
| case CURL_SSLVERSION_TLSv1_0: |
| case CURL_SSLVERSION_TLSv1_1: |
| case CURL_SSLVERSION_TLSv1_2: { |
| CURLcode result = set_ssl_version_min_max(data, &prioritylist, |
| tls13support); |
| if(result) |
| return result; |
| break; |
| } |
| case CURL_SSLVERSION_SSLv2: |
| case CURL_SSLVERSION_SSLv3: |
| default: |
| failf(data, "GnuTLS does not support SSLv2 or SSLv3"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| #ifdef HAVE_GNUTLS_SRP |
| /* Only add SRP to the cipher list if SRP is requested. Otherwise |
| * GnuTLS will disable TLS 1.3 support. */ |
| if(SSL_SET_OPTION(authtype) == CURL_TLSAUTH_SRP) { |
| size_t len = strlen(prioritylist); |
| |
| char *prioritysrp = malloc(len + sizeof(GNUTLS_SRP) + 1); |
| if(!prioritysrp) |
| return CURLE_OUT_OF_MEMORY; |
| strcpy(prioritysrp, prioritylist); |
| strcpy(prioritysrp + len, ":" GNUTLS_SRP); |
| rc = gnutls_priority_set_direct(session, prioritysrp, &err); |
| free(prioritysrp); |
| |
| if((rc == GNUTLS_E_INVALID_REQUEST) && err) { |
| infof(data, "This GnuTLS does not support SRP"); |
| } |
| } |
| else { |
| #endif |
| infof(data, "GnuTLS ciphers: %s", prioritylist); |
| rc = gnutls_priority_set_direct(session, prioritylist, &err); |
| #ifdef HAVE_GNUTLS_SRP |
| } |
| #endif |
| |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "Error %d setting GnuTLS cipher list starting with %s", |
| rc, err); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| if(conn->bits.tls_enable_alpn) { |
| int cur = 0; |
| gnutls_datum_t protocols[2]; |
| |
| #ifdef USE_HTTP2 |
| if(data->state.httpwant >= CURL_HTTP_VERSION_2 |
| #ifndef CURL_DISABLE_PROXY |
| && (!SSL_IS_PROXY() || !conn->bits.tunnel_proxy) |
| #endif |
| ) { |
| protocols[cur].data = (unsigned char *)ALPN_H2; |
| protocols[cur].size = ALPN_H2_LENGTH; |
| cur++; |
| infof(data, "ALPN, offering %.*s", ALPN_H2_LENGTH, ALPN_H2); |
| } |
| #endif |
| |
| protocols[cur].data = (unsigned char *)ALPN_HTTP_1_1; |
| protocols[cur].size = ALPN_HTTP_1_1_LENGTH; |
| cur++; |
| infof(data, "ALPN, offering %s", ALPN_HTTP_1_1); |
| |
| gnutls_alpn_set_protocols(session, protocols, cur, 0); |
| } |
| |
| if(SSL_SET_OPTION(primary.clientcert)) { |
| if(SSL_SET_OPTION(key_passwd)) { |
| const unsigned int supported_key_encryption_algorithms = |
| GNUTLS_PKCS_USE_PKCS12_3DES | GNUTLS_PKCS_USE_PKCS12_ARCFOUR | |
| GNUTLS_PKCS_USE_PKCS12_RC2_40 | GNUTLS_PKCS_USE_PBES2_3DES | |
| GNUTLS_PKCS_USE_PBES2_AES_128 | GNUTLS_PKCS_USE_PBES2_AES_192 | |
| GNUTLS_PKCS_USE_PBES2_AES_256; |
| rc = gnutls_certificate_set_x509_key_file2( |
| backend->cred, |
| SSL_SET_OPTION(primary.clientcert), |
| SSL_SET_OPTION(key) ? |
| SSL_SET_OPTION(key) : SSL_SET_OPTION(primary.clientcert), |
| do_file_type(SSL_SET_OPTION(cert_type)), |
| SSL_SET_OPTION(key_passwd), |
| supported_key_encryption_algorithms); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, |
| "error reading X.509 potentially-encrypted key file: %s", |
| gnutls_strerror(rc)); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| else { |
| if(gnutls_certificate_set_x509_key_file( |
| backend->cred, |
| SSL_SET_OPTION(primary.clientcert), |
| SSL_SET_OPTION(key) ? |
| SSL_SET_OPTION(key) : SSL_SET_OPTION(primary.clientcert), |
| do_file_type(SSL_SET_OPTION(cert_type)) ) != |
| GNUTLS_E_SUCCESS) { |
| failf(data, "error reading X.509 key or certificate file"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| } |
| |
| #ifdef HAVE_GNUTLS_SRP |
| /* put the credentials to the current session */ |
| if(SSL_SET_OPTION(authtype) == CURL_TLSAUTH_SRP) { |
| rc = gnutls_credentials_set(session, GNUTLS_CRD_SRP, |
| backend->srp_client_cred); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc)); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| else |
| #endif |
| { |
| rc = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE, |
| backend->cred); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc)); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| |
| #ifndef CURL_DISABLE_PROXY |
| if(conn->proxy_ssl[sockindex].use) { |
| transport_ptr = conn->proxy_ssl[sockindex].backend->session; |
| gnutls_transport_push = gtls_push_ssl; |
| gnutls_transport_pull = gtls_pull_ssl; |
| } |
| else |
| #endif |
| { |
| /* file descriptor for the socket */ |
| transport_ptr = &conn->sock[sockindex]; |
| gnutls_transport_push = gtls_push; |
| gnutls_transport_pull = gtls_pull; |
| } |
| |
| /* set the connection handle */ |
| gnutls_transport_set_ptr(session, transport_ptr); |
| |
| /* register callback functions to send and receive data. */ |
| gnutls_transport_set_push_function(session, gnutls_transport_push); |
| gnutls_transport_set_pull_function(session, gnutls_transport_pull); |
| |
| if(SSL_CONN_CONFIG(verifystatus)) { |
| rc = gnutls_ocsp_status_request_enable_client(session, NULL, 0, NULL); |
| if(rc != GNUTLS_E_SUCCESS) { |
| failf(data, "gnutls_ocsp_status_request_enable_client() failed: %d", rc); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| |
| /* This might be a reconnect, so we check for a session ID in the cache |
| to speed up things */ |
| if(SSL_SET_OPTION(primary.sessionid)) { |
| void *ssl_sessionid; |
| size_t ssl_idsize; |
| |
| Curl_ssl_sessionid_lock(data); |
| if(!Curl_ssl_getsessionid(data, conn, |
| SSL_IS_PROXY() ? TRUE : FALSE, |
| &ssl_sessionid, &ssl_idsize, sockindex)) { |
| /* we got a session id, use it! */ |
| gnutls_session_set_data(session, ssl_sessionid, ssl_idsize); |
| |
| /* Informational message */ |
| infof(data, "SSL re-using session ID"); |
| } |
| Curl_ssl_sessionid_unlock(data); |
| } |
| |
| return CURLE_OK; |
| } |
| |
| static CURLcode pkp_pin_peer_pubkey(struct Curl_easy *data, |
| gnutls_x509_crt_t cert, |
| const char *pinnedpubkey) |
| { |
| /* Scratch */ |
| size_t len1 = 0, len2 = 0; |
| unsigned char *buff1 = NULL; |
| |
| gnutls_pubkey_t key = NULL; |
| |
| /* Result is returned to caller */ |
| CURLcode result = CURLE_SSL_PINNEDPUBKEYNOTMATCH; |
| |
| /* if a path wasn't specified, don't pin */ |
| if(NULL == pinnedpubkey) |
| return CURLE_OK; |
| |
| if(NULL == cert) |
| return result; |
| |
| do { |
| int ret; |
| |
| /* Begin Gyrations to get the public key */ |
| gnutls_pubkey_init(&key); |
| |
| ret = gnutls_pubkey_import_x509(key, cert, 0); |
| if(ret < 0) |
| break; /* failed */ |
| |
| ret = gnutls_pubkey_export(key, GNUTLS_X509_FMT_DER, NULL, &len1); |
| if(ret != GNUTLS_E_SHORT_MEMORY_BUFFER || len1 == 0) |
| break; /* failed */ |
| |
| buff1 = malloc(len1); |
| if(NULL == buff1) |
| break; /* failed */ |
| |
| len2 = len1; |
| |
| ret = gnutls_pubkey_export(key, GNUTLS_X509_FMT_DER, buff1, &len2); |
| if(ret < 0 || len1 != len2) |
| break; /* failed */ |
| |
| /* End Gyrations */ |
| |
| /* The one good exit point */ |
| result = Curl_pin_peer_pubkey(data, pinnedpubkey, buff1, len1); |
| } while(0); |
| |
| if(NULL != key) |
| gnutls_pubkey_deinit(key); |
| |
| Curl_safefree(buff1); |
| |
| return result; |
| } |
| |
| static Curl_recv gtls_recv; |
| static Curl_send gtls_send; |
| |
| static CURLcode |
| gtls_connect_step3(struct Curl_easy *data, |
| struct connectdata *conn, |
| int sockindex) |
| { |
| unsigned int cert_list_size; |
| const gnutls_datum_t *chainp; |
| unsigned int verify_status = 0; |
| gnutls_x509_crt_t x509_cert, x509_issuer; |
| gnutls_datum_t issuerp; |
| gnutls_datum_t certfields; |
| char certname[65] = ""; /* limited to 64 chars by ASN.1 */ |
| size_t size; |
| time_t certclock; |
| const char *ptr; |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| struct ssl_backend_data *backend = connssl->backend; |
| gnutls_session_t session = backend->session; |
| int rc; |
| gnutls_datum_t proto; |
| CURLcode result = CURLE_OK; |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| unsigned int algo; |
| unsigned int bits; |
| gnutls_protocol_t version = gnutls_protocol_get_version(session); |
| #endif |
| const char * const hostname = SSL_HOST_NAME(); |
| long * const certverifyresult = &SSL_SET_OPTION_LVALUE(certverifyresult); |
| |
| /* the name of the cipher suite used, e.g. ECDHE_RSA_AES_256_GCM_SHA384. */ |
| ptr = gnutls_cipher_suite_get_name(gnutls_kx_get(session), |
| gnutls_cipher_get(session), |
| gnutls_mac_get(session)); |
| |
| infof(data, "SSL connection using %s / %s", |
| gnutls_protocol_get_name(version), ptr); |
| |
| /* This function will return the peer's raw certificate (chain) as sent by |
| the peer. These certificates are in raw format (DER encoded for |
| X.509). In case of a X.509 then a certificate list may be present. The |
| first certificate in the list is the peer's certificate, following the |
| issuer's certificate, then the issuer's issuer etc. */ |
| |
| chainp = gnutls_certificate_get_peers(session, &cert_list_size); |
| if(!chainp) { |
| if(SSL_CONN_CONFIG(verifypeer) || |
| SSL_CONN_CONFIG(verifyhost) || |
| SSL_CONN_CONFIG(issuercert)) { |
| #ifdef HAVE_GNUTLS_SRP |
| if(SSL_SET_OPTION(authtype) == CURL_TLSAUTH_SRP |
| && SSL_SET_OPTION(username) != NULL |
| && !SSL_CONN_CONFIG(verifypeer) |
| && gnutls_cipher_get(session)) { |
| /* no peer cert, but auth is ok if we have SRP user and cipher and no |
| peer verify */ |
| } |
| else { |
| #endif |
| failf(data, "failed to get server cert"); |
| *certverifyresult = GNUTLS_E_NO_CERTIFICATE_FOUND; |
| return CURLE_PEER_FAILED_VERIFICATION; |
| #ifdef HAVE_GNUTLS_SRP |
| } |
| #endif |
| } |
| infof(data, " common name: WARNING couldn't obtain"); |
| } |
| |
| if(data->set.ssl.certinfo && chainp) { |
| unsigned int i; |
| |
| result = Curl_ssl_init_certinfo(data, cert_list_size); |
| if(result) |
| return result; |
| |
| for(i = 0; i < cert_list_size; i++) { |
| const char *beg = (const char *) chainp[i].data; |
| const char *end = beg + chainp[i].size; |
| |
| result = Curl_extract_certinfo(data, i, beg, end); |
| if(result) |
| return result; |
| } |
| } |
| |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| /* This function will try to verify the peer's certificate and return its |
| status (trusted, invalid etc.). The value of status should be one or |
| more of the gnutls_certificate_status_t enumerated elements bitwise |
| or'd. To avoid denial of service attacks some default upper limits |
| regarding the certificate key size and chain size are set. To override |
| them use gnutls_certificate_set_verify_limits(). */ |
| |
| rc = gnutls_certificate_verify_peers2(session, &verify_status); |
| if(rc < 0) { |
| failf(data, "server cert verify failed: %d", rc); |
| *certverifyresult = rc; |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| *certverifyresult = verify_status; |
| |
| /* verify_status is a bitmask of gnutls_certificate_status bits */ |
| if(verify_status & GNUTLS_CERT_INVALID) { |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| failf(data, "server certificate verification failed. CAfile: %s " |
| "CRLfile: %s", SSL_CONN_CONFIG(CAfile) ? SSL_CONN_CONFIG(CAfile): |
| "none", |
| SSL_SET_OPTION(CRLfile)?SSL_SET_OPTION(CRLfile):"none"); |
| return CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else |
| infof(data, " server certificate verification FAILED"); |
| } |
| else |
| infof(data, " server certificate verification OK"); |
| } |
| else |
| infof(data, " server certificate verification SKIPPED"); |
| |
| if(SSL_CONN_CONFIG(verifystatus)) { |
| if(gnutls_ocsp_status_request_is_checked(session, 0) == 0) { |
| gnutls_datum_t status_request; |
| gnutls_ocsp_resp_t ocsp_resp; |
| |
| gnutls_ocsp_cert_status_t status; |
| gnutls_x509_crl_reason_t reason; |
| |
| rc = gnutls_ocsp_status_request_get(session, &status_request); |
| |
| infof(data, " server certificate status verification FAILED"); |
| |
| if(rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE) { |
| failf(data, "No OCSP response received"); |
| return CURLE_SSL_INVALIDCERTSTATUS; |
| } |
| |
| if(rc < 0) { |
| failf(data, "Invalid OCSP response received"); |
| return CURLE_SSL_INVALIDCERTSTATUS; |
| } |
| |
| gnutls_ocsp_resp_init(&ocsp_resp); |
| |
| rc = gnutls_ocsp_resp_import(ocsp_resp, &status_request); |
| if(rc < 0) { |
| failf(data, "Invalid OCSP response received"); |
| return CURLE_SSL_INVALIDCERTSTATUS; |
| } |
| |
| (void)gnutls_ocsp_resp_get_single(ocsp_resp, 0, NULL, NULL, NULL, NULL, |
| &status, NULL, NULL, NULL, &reason); |
| |
| switch(status) { |
| case GNUTLS_OCSP_CERT_GOOD: |
| break; |
| |
| case GNUTLS_OCSP_CERT_REVOKED: { |
| const char *crl_reason; |
| |
| switch(reason) { |
| default: |
| case GNUTLS_X509_CRLREASON_UNSPECIFIED: |
| crl_reason = "unspecified reason"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_KEYCOMPROMISE: |
| crl_reason = "private key compromised"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_CACOMPROMISE: |
| crl_reason = "CA compromised"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_AFFILIATIONCHANGED: |
| crl_reason = "affiliation has changed"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_SUPERSEDED: |
| crl_reason = "certificate superseded"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_CESSATIONOFOPERATION: |
| crl_reason = "operation has ceased"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_CERTIFICATEHOLD: |
| crl_reason = "certificate is on hold"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_REMOVEFROMCRL: |
| crl_reason = "will be removed from delta CRL"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_PRIVILEGEWITHDRAWN: |
| crl_reason = "privilege withdrawn"; |
| break; |
| |
| case GNUTLS_X509_CRLREASON_AACOMPROMISE: |
| crl_reason = "AA compromised"; |
| break; |
| } |
| |
| failf(data, "Server certificate was revoked: %s", crl_reason); |
| break; |
| } |
| |
| default: |
| case GNUTLS_OCSP_CERT_UNKNOWN: |
| failf(data, "Server certificate status is unknown"); |
| break; |
| } |
| |
| gnutls_ocsp_resp_deinit(ocsp_resp); |
| |
| return CURLE_SSL_INVALIDCERTSTATUS; |
| } |
| else |
| infof(data, " server certificate status verification OK"); |
| } |
| else |
| infof(data, " server certificate status verification SKIPPED"); |
| |
| /* initialize an X.509 certificate structure. */ |
| gnutls_x509_crt_init(&x509_cert); |
| |
| if(chainp) |
| /* convert the given DER or PEM encoded Certificate to the native |
| gnutls_x509_crt_t format */ |
| gnutls_x509_crt_import(x509_cert, chainp, GNUTLS_X509_FMT_DER); |
| |
| if(SSL_CONN_CONFIG(issuercert)) { |
| gnutls_x509_crt_init(&x509_issuer); |
| issuerp = load_file(SSL_CONN_CONFIG(issuercert)); |
| gnutls_x509_crt_import(x509_issuer, &issuerp, GNUTLS_X509_FMT_PEM); |
| rc = gnutls_x509_crt_check_issuer(x509_cert, x509_issuer); |
| gnutls_x509_crt_deinit(x509_issuer); |
| unload_file(issuerp); |
| if(rc <= 0) { |
| failf(data, "server certificate issuer check failed (IssuerCert: %s)", |
| SSL_CONN_CONFIG(issuercert)?SSL_CONN_CONFIG(issuercert):"none"); |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_SSL_ISSUER_ERROR; |
| } |
| infof(data, " server certificate issuer check OK (Issuer Cert: %s)", |
| SSL_CONN_CONFIG(issuercert)?SSL_CONN_CONFIG(issuercert):"none"); |
| } |
| |
| size = sizeof(certname); |
| rc = gnutls_x509_crt_get_dn_by_oid(x509_cert, GNUTLS_OID_X520_COMMON_NAME, |
| 0, /* the first and only one */ |
| FALSE, |
| certname, |
| &size); |
| if(rc) { |
| infof(data, "error fetching CN from cert:%s", |
| gnutls_strerror(rc)); |
| } |
| |
| /* This function will check if the given certificate's subject matches the |
| given hostname. This is a basic implementation of the matching described |
| in RFC2818 (HTTPS), which takes into account wildcards, and the subject |
| alternative name PKIX extension. Returns non zero on success, and zero on |
| failure. */ |
| rc = gnutls_x509_crt_check_hostname(x509_cert, hostname); |
| #if GNUTLS_VERSION_NUMBER < 0x030306 |
| /* Before 3.3.6, gnutls_x509_crt_check_hostname() didn't check IP |
| addresses. */ |
| if(!rc) { |
| #ifdef ENABLE_IPV6 |
| #define use_addr in6_addr |
| #else |
| #define use_addr in_addr |
| #endif |
| unsigned char addrbuf[sizeof(struct use_addr)]; |
| size_t addrlen = 0; |
| |
| if(Curl_inet_pton(AF_INET, hostname, addrbuf) > 0) |
| addrlen = 4; |
| #ifdef ENABLE_IPV6 |
| else if(Curl_inet_pton(AF_INET6, hostname, addrbuf) > 0) |
| addrlen = 16; |
| #endif |
| |
| if(addrlen) { |
| unsigned char certaddr[sizeof(struct use_addr)]; |
| int i; |
| |
| for(i = 0; ; i++) { |
| size_t certaddrlen = sizeof(certaddr); |
| int ret = gnutls_x509_crt_get_subject_alt_name(x509_cert, i, certaddr, |
| &certaddrlen, NULL); |
| /* If this happens, it wasn't an IP address. */ |
| if(ret == GNUTLS_E_SHORT_MEMORY_BUFFER) |
| continue; |
| if(ret < 0) |
| break; |
| if(ret != GNUTLS_SAN_IPADDRESS) |
| continue; |
| if(certaddrlen == addrlen && !memcmp(addrbuf, certaddr, addrlen)) { |
| rc = 1; |
| break; |
| } |
| } |
| } |
| } |
| #endif |
| if(!rc) { |
| if(SSL_CONN_CONFIG(verifyhost)) { |
| failf(data, "SSL: certificate subject name (%s) does not match " |
| "target host name '%s'", certname, SSL_HOST_DISPNAME()); |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else |
| infof(data, " common name: %s (does not match '%s')", |
| certname, SSL_HOST_DISPNAME()); |
| } |
| else |
| infof(data, " common name: %s (matched)", certname); |
| |
| /* Check for time-based validity */ |
| certclock = gnutls_x509_crt_get_expiration_time(x509_cert); |
| |
| if(certclock == (time_t)-1) { |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| failf(data, "server cert expiration date verify failed"); |
| *certverifyresult = GNUTLS_CERT_EXPIRED; |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else |
| infof(data, " server certificate expiration date verify FAILED"); |
| } |
| else { |
| if(certclock < time(NULL)) { |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| failf(data, "server certificate expiration date has passed."); |
| *certverifyresult = GNUTLS_CERT_EXPIRED; |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else |
| infof(data, " server certificate expiration date FAILED"); |
| } |
| else |
| infof(data, " server certificate expiration date OK"); |
| } |
| |
| certclock = gnutls_x509_crt_get_activation_time(x509_cert); |
| |
| if(certclock == (time_t)-1) { |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| failf(data, "server cert activation date verify failed"); |
| *certverifyresult = GNUTLS_CERT_NOT_ACTIVATED; |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else |
| infof(data, " server certificate activation date verify FAILED"); |
| } |
| else { |
| if(certclock > time(NULL)) { |
| if(SSL_CONN_CONFIG(verifypeer)) { |
| failf(data, "server certificate not activated yet."); |
| *certverifyresult = GNUTLS_CERT_NOT_ACTIVATED; |
| gnutls_x509_crt_deinit(x509_cert); |
| return CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else |
| infof(data, " server certificate activation date FAILED"); |
| } |
| else |
| infof(data, " server certificate activation date OK"); |
| } |
| |
| ptr = SSL_PINNED_PUB_KEY(); |
| if(ptr) { |
| result = pkp_pin_peer_pubkey(data, x509_cert, ptr); |
| if(result != CURLE_OK) { |
| failf(data, "SSL: public key does not match pinned public key!"); |
| gnutls_x509_crt_deinit(x509_cert); |
| return result; |
| } |
| } |
| |
| /* Show: |
| |
| - subject |
| - start date |
| - expire date |
| - common name |
| - issuer |
| |
| */ |
| |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| /* public key algorithm's parameters */ |
| algo = gnutls_x509_crt_get_pk_algorithm(x509_cert, &bits); |
| infof(data, " certificate public key: %s", |
| gnutls_pk_algorithm_get_name(algo)); |
| |
| /* version of the X.509 certificate. */ |
| infof(data, " certificate version: #%d", |
| gnutls_x509_crt_get_version(x509_cert)); |
| |
| |
| rc = gnutls_x509_crt_get_dn2(x509_cert, &certfields); |
| if(rc) |
| infof(data, "Failed to get certificate name"); |
| else { |
| infof(data, " subject: %s", certfields.data); |
| |
| certclock = gnutls_x509_crt_get_activation_time(x509_cert); |
| showtime(data, "start date", certclock); |
| |
| certclock = gnutls_x509_crt_get_expiration_time(x509_cert); |
| showtime(data, "expire date", certclock); |
| |
| gnutls_free(certfields.data); |
| } |
| |
| rc = gnutls_x509_crt_get_issuer_dn2(x509_cert, &certfields); |
| if(rc) |
| infof(data, "Failed to get certificate issuer"); |
| else { |
| infof(data, " issuer: %s", certfields.data); |
| |
| gnutls_free(certfields.data); |
| } |
| #endif |
| |
| gnutls_x509_crt_deinit(x509_cert); |
| |
| if(conn->bits.tls_enable_alpn) { |
| rc = gnutls_alpn_get_selected_protocol(session, &proto); |
| if(rc == 0) { |
| infof(data, "ALPN, server accepted to use %.*s", proto.size, |
| proto.data); |
| |
| #ifdef USE_HTTP2 |
| if(proto.size == ALPN_H2_LENGTH && |
| !memcmp(ALPN_H2, proto.data, |
| ALPN_H2_LENGTH)) { |
| conn->negnpn = CURL_HTTP_VERSION_2; |
| } |
| else |
| #endif |
| if(proto.size == ALPN_HTTP_1_1_LENGTH && |
| !memcmp(ALPN_HTTP_1_1, proto.data, ALPN_HTTP_1_1_LENGTH)) { |
| conn->negnpn = CURL_HTTP_VERSION_1_1; |
| } |
| } |
| else |
| infof(data, "ALPN, server did not agree to a protocol"); |
| |
| Curl_multiuse_state(data, conn->negnpn == CURL_HTTP_VERSION_2 ? |
| BUNDLE_MULTIPLEX : BUNDLE_NO_MULTIUSE); |
| } |
| |
| conn->ssl[sockindex].state = ssl_connection_complete; |
| conn->recv[sockindex] = gtls_recv; |
| conn->send[sockindex] = gtls_send; |
| |
| if(SSL_SET_OPTION(primary.sessionid)) { |
| /* we always unconditionally get the session id here, as even if we |
| already got it from the cache and asked to use it in the connection, it |
| might've been rejected and then a new one is in use now and we need to |
| detect that. */ |
| void *connect_sessionid; |
| size_t connect_idsize = 0; |
| |
| /* get the session ID data size */ |
| gnutls_session_get_data(session, NULL, &connect_idsize); |
| connect_sessionid = malloc(connect_idsize); /* get a buffer for it */ |
| |
| if(connect_sessionid) { |
| bool incache; |
| void *ssl_sessionid; |
| |
| /* extract session ID to the allocated buffer */ |
| gnutls_session_get_data(session, connect_sessionid, &connect_idsize); |
| |
| Curl_ssl_sessionid_lock(data); |
| incache = !(Curl_ssl_getsessionid(data, conn, |
| SSL_IS_PROXY() ? TRUE : FALSE, |
| &ssl_sessionid, NULL, sockindex)); |
| if(incache) { |
| /* there was one before in the cache, so instead of risking that the |
| previous one was rejected, we just kill that and store the new */ |
| Curl_ssl_delsessionid(data, ssl_sessionid); |
| } |
| |
| /* store this session id */ |
| result = Curl_ssl_addsessionid(data, conn, |
| SSL_IS_PROXY() ? TRUE : FALSE, |
| connect_sessionid, connect_idsize, |
| sockindex); |
| Curl_ssl_sessionid_unlock(data); |
| if(result) { |
| free(connect_sessionid); |
| result = CURLE_OUT_OF_MEMORY; |
| } |
| } |
| else |
| result = CURLE_OUT_OF_MEMORY; |
| } |
| |
| return result; |
| } |
| |
| |
| /* |
| * This function is called after the TCP connect has completed. Setup the TLS |
| * layer and do all necessary magic. |
| */ |
| /* We use connssl->connecting_state to keep track of the connection status; |
| there are three states: 'ssl_connect_1' (not started yet or complete), |
| 'ssl_connect_2_reading' (waiting for data from server), and |
| 'ssl_connect_2_writing' (waiting to be able to write). |
| */ |
| static CURLcode |
| gtls_connect_common(struct Curl_easy *data, |
| struct connectdata *conn, |
| int sockindex, |
| bool nonblocking, |
| bool *done) |
| { |
| int rc; |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| |
| /* Initiate the connection, if not already done */ |
| if(ssl_connect_1 == connssl->connecting_state) { |
| rc = gtls_connect_step1(data, conn, sockindex); |
| if(rc) |
| return rc; |
| } |
| |
| rc = handshake(data, conn, sockindex, TRUE, nonblocking); |
| if(rc) |
| /* handshake() sets its own error message with failf() */ |
| return rc; |
| |
| /* Finish connecting once the handshake is done */ |
| if(ssl_connect_1 == connssl->connecting_state) { |
| rc = gtls_connect_step3(data, conn, sockindex); |
| if(rc) |
| return rc; |
| } |
| |
| *done = ssl_connect_1 == connssl->connecting_state; |
| |
| return CURLE_OK; |
| } |
| |
| static CURLcode gtls_connect_nonblocking(struct Curl_easy *data, |
| struct connectdata *conn, |
| int sockindex, bool *done) |
| { |
| return gtls_connect_common(data, conn, sockindex, TRUE, done); |
| } |
| |
| static CURLcode gtls_connect(struct Curl_easy *data, struct connectdata *conn, |
| int sockindex) |
| { |
| CURLcode result; |
| bool done = FALSE; |
| |
| result = gtls_connect_common(data, conn, sockindex, FALSE, &done); |
| if(result) |
| return result; |
| |
| DEBUGASSERT(done); |
| |
| return CURLE_OK; |
| } |
| |
| static bool gtls_data_pending(const struct connectdata *conn, |
| int connindex) |
| { |
| const struct ssl_connect_data *connssl = &conn->ssl[connindex]; |
| bool res = FALSE; |
| struct ssl_backend_data *backend = connssl->backend; |
| if(backend->session && |
| 0 != gnutls_record_check_pending(backend->session)) |
| res = TRUE; |
| |
| #ifndef CURL_DISABLE_PROXY |
| connssl = &conn->proxy_ssl[connindex]; |
| backend = connssl->backend; |
| if(backend->session && |
| 0 != gnutls_record_check_pending(backend->session)) |
| res = TRUE; |
| #endif |
| |
| return res; |
| } |
| |
| static ssize_t gtls_send(struct Curl_easy *data, |
| int sockindex, |
| const void *mem, |
| size_t len, |
| CURLcode *curlcode) |
| { |
| struct connectdata *conn = data->conn; |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| struct ssl_backend_data *backend = connssl->backend; |
| ssize_t rc = gnutls_record_send(backend->session, mem, len); |
| |
| if(rc < 0) { |
| *curlcode = (rc == GNUTLS_E_AGAIN) |
| ? CURLE_AGAIN |
| : CURLE_SEND_ERROR; |
| |
| rc = -1; |
| } |
| |
| return rc; |
| } |
| |
| static void close_one(struct ssl_connect_data *connssl) |
| { |
| struct ssl_backend_data *backend = connssl->backend; |
| if(backend->session) { |
| char buf[32]; |
| /* Maybe the server has already sent a close notify alert. |
| Read it to avoid an RST on the TCP connection. */ |
| (void)gnutls_record_recv(backend->session, buf, sizeof(buf)); |
| gnutls_bye(backend->session, GNUTLS_SHUT_WR); |
| gnutls_deinit(backend->session); |
| backend->session = NULL; |
| } |
| if(backend->cred) { |
| gnutls_certificate_free_credentials(backend->cred); |
| backend->cred = NULL; |
| } |
| #ifdef HAVE_GNUTLS_SRP |
| if(backend->srp_client_cred) { |
| gnutls_srp_free_client_credentials(backend->srp_client_cred); |
| backend->srp_client_cred = NULL; |
| } |
| #endif |
| } |
| |
| static void gtls_close(struct Curl_easy *data, struct connectdata *conn, |
| int sockindex) |
| { |
| (void) data; |
| close_one(&conn->ssl[sockindex]); |
| #ifndef CURL_DISABLE_PROXY |
| close_one(&conn->proxy_ssl[sockindex]); |
| #endif |
| } |
| |
| /* |
| * This function is called to shut down the SSL layer but keep the |
| * socket open (CCC - Clear Command Channel) |
| */ |
| static int gtls_shutdown(struct Curl_easy *data, struct connectdata *conn, |
| int sockindex) |
| { |
| struct ssl_connect_data *connssl = &conn->ssl[sockindex]; |
| struct ssl_backend_data *backend = connssl->backend; |
| int retval = 0; |
| |
| #ifndef CURL_DISABLE_FTP |
| /* This has only been tested on the proftpd server, and the mod_tls code |
| sends a close notify alert without waiting for a close notify alert in |
| response. Thus we wait for a close notify alert from the server, but |
| we do not send one. Let's hope other servers do the same... */ |
| |
| if(data->set.ftp_ccc == CURLFTPSSL_CCC_ACTIVE) |
| gnutls_bye(backend->session, GNUTLS_SHUT_WR); |
| #endif |
| |
| if(backend->session) { |
| ssize_t result; |
| bool done = FALSE; |
| char buf[120]; |
| |
| while(!done) { |
| int what = SOCKET_READABLE(conn->sock[sockindex], |
| SSL_SHUTDOWN_TIMEOUT); |
| if(what > 0) { |
| /* Something to read, let's do it and hope that it is the close |
| notify alert from the server */ |
| result = gnutls_record_recv(backend->session, |
| buf, sizeof(buf)); |
| switch(result) { |
| case 0: |
| /* This is the expected response. There was no data but only |
| the close notify alert */ |
| done = TRUE; |
| break; |
| case GNUTLS_E_AGAIN: |
| case GNUTLS_E_INTERRUPTED: |
| infof(data, "GNUTLS_E_AGAIN || GNUTLS_E_INTERRUPTED"); |
| break; |
| default: |
| retval = -1; |
| done = TRUE; |
| break; |
| } |
| } |
| else if(0 == what) { |
| /* timeout */ |
| failf(data, "SSL shutdown timeout"); |
| done = TRUE; |
| } |
| else { |
| /* anything that gets here is fatally bad */ |
| failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); |
| retval = -1; |
| done = TRUE; |
| } |
| } |
| gnutls_deinit(backend->session); |
| } |
| gnutls_certificate_free_credentials(backend->cred); |
| |
| #ifdef HAVE_GNUTLS_SRP |
| if(SSL_SET_OPTION(authtype) == CURL_TLSAUTH_SRP |
| && SSL_SET_OPTION(username) != NULL) |
| gnutls_srp_free_client_credentials(backend->srp_client_cred); |
| #endif |
| |
| backend->cred = NULL; |
| backend->session = NULL; |
| |
| return retval; |
| } |
| |
| static ssize_t gtls_recv(struct Curl_easy *data, /* connection data */ |
| int num, /* socketindex */ |
| char *buf, /* store read data here */ |
| size_t buffersize, /* max amount to read */ |
| CURLcode *curlcode) |
| { |
| struct connectdata *conn = data->conn; |
| struct ssl_connect_data *connssl = &conn->ssl[num]; |
| struct ssl_backend_data *backend = connssl->backend; |
| ssize_t ret; |
| |
| ret = gnutls_record_recv(backend->session, buf, buffersize); |
| if((ret == GNUTLS_E_AGAIN) || (ret == GNUTLS_E_INTERRUPTED)) { |
| *curlcode = CURLE_AGAIN; |
| return -1; |
| } |
| |
| if(ret == GNUTLS_E_REHANDSHAKE) { |
| /* BLOCKING call, this is bad but a work-around for now. Fixing this "the |
| proper way" takes a whole lot of work. */ |
| CURLcode result = handshake(data, conn, num, FALSE, FALSE); |
| if(result) |
| /* handshake() writes error message on its own */ |
| *curlcode = result; |
| else |
| *curlcode = CURLE_AGAIN; /* then return as if this was a wouldblock */ |
| return -1; |
| } |
| |
| if(ret < 0) { |
| failf(data, "GnuTLS recv error (%d): %s", |
| |
| (int)ret, gnutls_strerror((int)ret)); |
| *curlcode = CURLE_RECV_ERROR; |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| static void gtls_session_free(void *ptr) |
| { |
| free(ptr); |
| } |
| |
| static size_t gtls_version(char *buffer, size_t size) |
| { |
| return msnprintf(buffer, size, "GnuTLS/%s", gnutls_check_version(NULL)); |
| } |
| |
| /* data might be NULL! */ |
| static CURLcode gtls_random(struct Curl_easy *data, |
| unsigned char *entropy, size_t length) |
| { |
| int rc; |
| (void)data; |
| rc = gnutls_rnd(GNUTLS_RND_RANDOM, entropy, length); |
| return rc?CURLE_FAILED_INIT:CURLE_OK; |
| } |
| |
| static CURLcode gtls_sha256sum(const unsigned char *tmp, /* input */ |
| size_t tmplen, |
| unsigned char *sha256sum, /* output */ |
| size_t sha256len) |
| { |
| struct sha256_ctx SHA256pw; |
| sha256_init(&SHA256pw); |
| sha256_update(&SHA256pw, (unsigned int)tmplen, tmp); |
| sha256_digest(&SHA256pw, (unsigned int)sha256len, sha256sum); |
| return CURLE_OK; |
| } |
| |
| static bool gtls_cert_status_request(void) |
| { |
| return TRUE; |
| } |
| |
| static void *gtls_get_internals(struct ssl_connect_data *connssl, |
| CURLINFO info UNUSED_PARAM) |
| { |
| struct ssl_backend_data *backend = connssl->backend; |
| (void)info; |
| return backend->session; |
| } |
| |
| const struct Curl_ssl Curl_ssl_gnutls = { |
| { CURLSSLBACKEND_GNUTLS, "gnutls" }, /* info */ |
| |
| SSLSUPP_CA_PATH | |
| SSLSUPP_CERTINFO | |
| SSLSUPP_PINNEDPUBKEY | |
| SSLSUPP_HTTPS_PROXY, |
| |
| sizeof(struct ssl_backend_data), |
| |
| gtls_init, /* init */ |
| gtls_cleanup, /* cleanup */ |
| gtls_version, /* version */ |
| Curl_none_check_cxn, /* check_cxn */ |
| gtls_shutdown, /* shutdown */ |
| gtls_data_pending, /* data_pending */ |
| gtls_random, /* random */ |
| gtls_cert_status_request, /* cert_status_request */ |
| gtls_connect, /* connect */ |
| gtls_connect_nonblocking, /* connect_nonblocking */ |
| Curl_ssl_getsock, /* getsock */ |
| gtls_get_internals, /* get_internals */ |
| gtls_close, /* close_one */ |
| Curl_none_close_all, /* close_all */ |
| gtls_session_free, /* session_free */ |
| Curl_none_set_engine, /* set_engine */ |
| Curl_none_set_engine_default, /* set_engine_default */ |
| Curl_none_engines_list, /* engines_list */ |
| Curl_none_false_start, /* false_start */ |
| gtls_sha256sum, /* sha256sum */ |
| NULL, /* associate_connection */ |
| NULL /* disassociate_connection */ |
| }; |
| |
| #endif /* USE_GNUTLS */ |
