| /* |
| * Copyright (c) 2006 Stefan Traby <[email protected]> |
| * |
| * Redistribution and use in source and binary forms, with or without modifica- |
| * tion, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER- |
| * CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO |
| * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE- |
| * CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH- |
| * ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * the GNU General Public License ("GPL") version 2 or any later version, |
| * in which case the provisions of the GPL are applicable instead of |
| * the above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use your |
| * version of this file under the BSD license, indicate your decision |
| * by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL. If you do not delete the |
| * provisions above, a recipient may use your version of this file under |
| * either the BSD or the GPL. |
| */ |
| |
| #include "config.h" |
| #include <stdio.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| #include <limits.h> |
| #include "lzf.h" |
| |
| #ifdef HAVE_GETOPT_H |
| # include <getopt.h> |
| #endif |
| |
| #define BLOCKSIZE (1024 * 64 - 1) |
| #define MAX_BLOCKSIZE BLOCKSIZE |
| |
| typedef unsigned char u8; |
| |
| static off_t nr_read, nr_written; |
| |
| static const char *imagename; |
| static enum { compress, uncompress, lzcat } mode = compress; |
| static int verbose = 0; |
| static int force = 0; |
| static long blocksize = BLOCKSIZE; |
| |
| #ifdef HAVE_GETOPT_LONG |
| |
| struct option longopts[] = { |
| {"compress", 0, 0, 'c'}, |
| {"decompress", 0, 0, 'd'}, |
| {"uncompress", 0, 0, 'd'}, |
| {"force", 0, 0, 'f'}, |
| {"help", 0, 0, 'h'}, |
| {"verbose", 0, 0, 'v'}, |
| {"blocksize", 1, 0, 'b'}, |
| {0, 0, 0, 0} |
| }; |
| |
| static const char *opt = |
| "-c --compress compress\n" |
| "-d --decompress decompress\n" |
| "-f --force force overwrite of output file\n" |
| "-h --help give this help\n" "-v --verbose verbose mode\n" "-b # --blocksize # set blocksize\n" "\n"; |
| |
| #else |
| |
| static const char *opt = |
| "-c compress\n" |
| "-d decompress\n" |
| "-f force overwrite of output file\n" |
| "-h give this help\n" |
| "-v verbose mode\n" |
| "-b # set blocksize\n" |
| "\n"; |
| |
| #endif |
| |
| static void |
| usage (int rc) |
| { |
| fprintf (stderr, "\n" |
| "lzf, a very lightweight compression/decompression utility written by Stefan Traby.\n" |
| "uses liblzf written by Marc Lehmann <[email protected]> You can find more info at\n" |
| "http://liblzf.plan9.de/\n" |
| "\n" |
| "usage: lzf [-dufhvb] [file ...]\n" |
| " unlzf [file ...]\n" |
| " lzcat [file ...]\n" |
| "\n%s", |
| opt); |
| |
| exit (rc); |
| } |
| |
| static inline ssize_t |
| rread (int fd, void *buf, size_t len) |
| { |
| ssize_t rc = 0, offset = 0; |
| char *p = buf; |
| |
| while (len && (rc = read (fd, &p[offset], len)) > 0) |
| { |
| offset += rc; |
| len -= rc; |
| } |
| |
| nr_read += offset; |
| |
| if (rc < 0) |
| return rc; |
| |
| return offset; |
| } |
| |
| /* returns 0 if all written else -1 */ |
| static inline ssize_t |
| wwrite (int fd, void *buf, size_t len) |
| { |
| ssize_t rc; |
| char *b = buf; |
| size_t l = len; |
| |
| while (l) |
| { |
| rc = write (fd, b, l); |
| if (rc < 0) |
| { |
| fprintf (stderr, "%s: write error: ", imagename); |
| perror (""); |
| return -1; |
| } |
| |
| l -= rc; |
| b += rc; |
| } |
| |
| nr_written += len; |
| return 0; |
| } |
| |
| /* |
| * Anatomy: an lzf file consists of any number of blocks in the following format: |
| * |
| * \x00 EOF (optional) |
| * "ZV\0" 2-byte-usize <uncompressed data> |
| * "ZV\1" 2-byte-csize 2-byte-usize <compressed data> |
| * "ZV\2" 4-byte-crc32-0xdebb20e3 (NYI) |
| */ |
| |
| |
| #define TYPE0_HDR_SIZE 5 |
| #define TYPE1_HDR_SIZE 7 |
| #define MAX_HDR_SIZE 7 |
| #define MIN_HDR_SIZE 5 |
| |
| static int |
| compress_fd (int from, int to) |
| { |
| ssize_t us, cs, len; |
| u8 buf1[MAX_BLOCKSIZE + MAX_HDR_SIZE + 16]; |
| u8 buf2[MAX_BLOCKSIZE + MAX_HDR_SIZE + 16]; |
| u8 *header; |
| |
| nr_read = nr_written = 0; |
| while ((us = rread (from, &buf1[MAX_HDR_SIZE], blocksize)) > 0) |
| { |
| cs = lzf_compress (&buf1[MAX_HDR_SIZE], us, &buf2[MAX_HDR_SIZE], us > 4 ? us - 4 : us); |
| if (cs) |
| { |
| header = &buf2[MAX_HDR_SIZE - TYPE1_HDR_SIZE]; |
| header[0] = 'Z'; |
| header[1] = 'V'; |
| header[2] = 1; |
| header[3] = cs >> 8; |
| header[4] = cs & 0xff; |
| header[5] = us >> 8; |
| header[6] = us & 0xff; |
| len = cs + TYPE1_HDR_SIZE; |
| } |
| else |
| { // write uncompressed |
| header = &buf1[MAX_HDR_SIZE - TYPE0_HDR_SIZE]; |
| header[0] = 'Z'; |
| header[1] = 'V'; |
| header[2] = 0; |
| header[3] = us >> 8; |
| header[4] = us & 0xff; |
| len = us + TYPE0_HDR_SIZE; |
| } |
| |
| if (wwrite (to, header, len) == -1) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| uncompress_fd (int from, int to) |
| { |
| u8 header[MAX_HDR_SIZE]; |
| u8 buf1[MAX_BLOCKSIZE + MAX_HDR_SIZE + 16]; |
| u8 buf2[MAX_BLOCKSIZE + MAX_HDR_SIZE + 16]; |
| u8 *p; |
| int l, rd; |
| ssize_t rc, cs, us, bytes, over = 0; |
| |
| nr_read = nr_written = 0; |
| while (1) |
| { |
| rc = rread (from, header + over, MAX_HDR_SIZE - over); |
| if (rc < 0) |
| { |
| fprintf (stderr, "%s: read error: ", imagename); |
| perror (""); |
| return -1; |
| } |
| |
| rc += over; |
| over = 0; |
| if (!rc || header[0] == 0) |
| return 0; |
| |
| if (rc < MIN_HDR_SIZE || header[0] != 'Z' || header[1] != 'V') |
| { |
| fprintf (stderr, "%s: invalid data stream - magic not found or short header\n", imagename); |
| return -1; |
| } |
| |
| switch (header[2]) |
| { |
| case 0: |
| cs = -1; |
| us = (header[3] << 8) | header[4]; |
| p = &header[TYPE0_HDR_SIZE]; |
| break; |
| case 1: |
| if (rc < TYPE1_HDR_SIZE) |
| { |
| goto short_read; |
| } |
| cs = (header[3] << 8) | header[4]; |
| us = (header[5] << 8) | header[6]; |
| p = &header[TYPE1_HDR_SIZE]; |
| break; |
| default: |
| fprintf (stderr, "%s: unknown blocktype\n", imagename); |
| return -1; |
| } |
| |
| bytes = cs == -1 ? us : cs; |
| l = &header[rc] - p; |
| |
| if (l > 0) |
| memcpy (buf1, p, l); |
| |
| if (l > bytes) |
| { |
| over = l - bytes; |
| memmove (header, &p[bytes], over); |
| } |
| |
| p = &buf1[l]; |
| rd = bytes - l; |
| if (rd > 0) |
| if ((rc = rread (from, p, rd)) != rd) |
| goto short_read; |
| |
| if (cs == -1) |
| { |
| if (wwrite (to, buf1, us)) |
| return -1; |
| } |
| else |
| { |
| if (lzf_decompress (buf1, cs, buf2, us) != us) |
| { |
| fprintf (stderr, "%s: decompress: invalid stream - data corrupted\n", imagename); |
| return -1; |
| } |
| |
| if (wwrite (to, buf2, us)) |
| return -1; |
| } |
| } |
| |
| return 0; |
| |
| short_read: |
| fprintf (stderr, "%s: short data\n", imagename); |
| return -1; |
| } |
| |
| static int |
| open_out (const char *name) |
| { |
| int fd; |
| int m = O_EXCL; |
| |
| if (force) |
| m = 0; |
| |
| fd = open (name, O_CREAT | O_WRONLY | O_TRUNC | m, 600); |
| #if defined(__MINGW32__) |
| _setmode(fd, _O_BINARY); |
| #endif |
| return fd; |
| } |
| |
| static int |
| compose_name (const char *fname, char *oname) |
| { |
| char *p; |
| |
| if (mode == compress) |
| { |
| if (strlen (fname) > PATH_MAX - 4) |
| { |
| fprintf (stderr, "%s: %s.lzf: name too long", imagename, fname); |
| return -1; |
| } |
| |
| strcpy (oname, fname); |
| strcat (oname, ".lzf"); |
| } |
| else |
| { |
| if (strlen (fname) > PATH_MAX) |
| { |
| fprintf (stderr, "%s: %s: name too long\n", imagename, fname); |
| return -1; |
| } |
| |
| strcpy (oname, fname); |
| p = &oname[strlen (oname)] - 4; |
| if (p < oname || strcmp (p, ".lzf")) |
| { |
| fprintf (stderr, "%s: %s: unknown suffix\n", imagename, fname); |
| return -1; |
| } |
| |
| *p = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| run_file (const char *fname) |
| { |
| int fd, fd2; |
| int rc; |
| struct stat mystat; |
| char oname[PATH_MAX + 1]; |
| |
| if (mode != lzcat) |
| if (compose_name (fname, oname)) |
| return -1; |
| |
| #if !defined(__MINGW32__) |
| rc = lstat (fname, &mystat); |
| #else |
| rc = stat (fname, &mystat); |
| #endif |
| fd = open (fname, O_RDONLY); |
| #if defined(__MINGW32__) |
| _setmode(fd, _O_BINARY); |
| #endif |
| if (rc || fd == -1) |
| { |
| fprintf (stderr, "%s: %s: ", imagename, fname); |
| perror (""); |
| return -1; |
| } |
| |
| if (!S_ISREG (mystat.st_mode)) |
| { |
| fprintf (stderr, "%s: %s: not a regular file.\n", imagename, fname); |
| close (fd); |
| return -1; |
| } |
| |
| if (mode == lzcat) |
| { |
| rc = uncompress_fd (fd, 1); |
| close (fd); |
| return rc; |
| } |
| |
| fd2 = open_out (oname); |
| if (fd2 == -1) |
| { |
| fprintf (stderr, "%s: %s: ", imagename, oname); |
| perror (""); |
| close (fd); |
| return -1; |
| } |
| |
| if (mode == compress) |
| { |
| rc = compress_fd (fd, fd2); |
| if (!rc && verbose) |
| fprintf (stderr, "%s: %5.1f%% -- replaced with %s\n", |
| fname, nr_read == 0 ? 0 : 100.0 - nr_written / ((double) nr_read / 100.0), oname); |
| } |
| else |
| { |
| rc = uncompress_fd (fd, fd2); |
| if (!rc && verbose) |
| fprintf (stderr, "%s: %5.1f%% -- replaced with %s\n", |
| fname, nr_written == 0 ? 0 : 100.0 - nr_read / ((double) nr_written / 100.0), oname); |
| } |
| |
| #if !defined(__MINGW32__) |
| fchmod (fd2, mystat.st_mode); |
| #else |
| chmod (oname, mystat.st_mode); |
| #endif |
| close (fd); |
| close (fd2); |
| |
| if (!rc) |
| unlink (fname); |
| |
| return rc; |
| } |
| |
| int |
| main (int argc, char *argv[]) |
| { |
| char *p = argv[0]; |
| int optc; |
| int rc = 0; |
| |
| errno = 0; |
| p = getenv ("LZF_BLOCKSIZE"); |
| if (p) |
| { |
| blocksize = strtoul (p, 0, 0); |
| if (errno || !blocksize || blocksize > MAX_BLOCKSIZE) |
| blocksize = BLOCKSIZE; |
| } |
| |
| p = strrchr (argv[0], '/'); |
| imagename = p ? ++p : argv[0]; |
| |
| if (!strncmp (imagename, "un", 2) || !strncmp (imagename, "de", 2)) |
| mode = uncompress; |
| |
| if (strstr (imagename, "cat")) |
| mode = lzcat; |
| |
| #ifdef HAVE_GETOPT_LONG |
| while ((optc = getopt_long (argc, argv, "cdfhvb:", longopts, 0)) != -1) |
| #else |
| while ((optc = getopt (argc, argv, "cdfhvb:")) != -1) |
| #endif |
| { |
| switch (optc) |
| { |
| case 'c': |
| mode = compress; |
| break; |
| case 'd': |
| mode = uncompress; |
| break; |
| case 'f': |
| force = 1; |
| break; |
| case 'h': |
| usage (0); |
| break; |
| case 'v': |
| verbose = 1; |
| break; |
| case 'b': |
| errno = 0; |
| blocksize = strtoul (optarg, 0, 0); |
| if (errno || !blocksize || blocksize > MAX_BLOCKSIZE) |
| blocksize = BLOCKSIZE; |
| break; |
| default: |
| usage (1); |
| break; |
| } |
| } |
| |
| if (optind == argc) |
| { // stdin stdout |
| if (!force) |
| { |
| if ((mode == uncompress || mode == lzcat) && isatty (0)) |
| { |
| fprintf (stderr, "%s: compressed data not read from a terminal. Use -f to force decompression.\n", imagename); |
| exit (1); |
| } |
| if (mode == compress && isatty (1)) |
| { |
| fprintf (stderr, "%s: compressed data not written to a terminal. Use -f to force compression.\n", imagename); |
| exit (1); |
| } |
| } |
| |
| if (mode == compress) |
| rc = compress_fd (0, 1); |
| else |
| rc = uncompress_fd (0, 1); |
| |
| exit (rc ? 1 : 0); |
| } |
| |
| while (optind < argc) |
| rc |= run_file (argv[optind++]); |
| |
| exit (rc ? 1 : 0); |
| } |
| |