| /*- |
| * Copyright (c) 1998 Brian Somers <[email protected]> |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * $FreeBSD: src/usr.sbin/ppp/bundle.c,v 1.136.26.1 2010/12/21 17:10:29 kensmith Exp $ |
| */ |
| |
| #include <sys/param.h> |
| #include <sys/socket.h> |
| #include <netinet/in.h> |
| #include <net/if.h> |
| #include <net/if_tun.h> /* For TUNS* ioctls */ |
| #include <net/route.h> |
| #include <netinet/in_systm.h> |
| #include <netinet/ip.h> |
| #include <sys/un.h> |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #ifdef __OpenBSD__ |
| #include <util.h> |
| #else |
| #include <libutil.h> |
| #endif |
| #include <paths.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/uio.h> |
| #include <sys/wait.h> |
| #include <termios.h> |
| #include <unistd.h> |
| |
| #include "layer.h" |
| #include "defs.h" |
| #include "command.h" |
| #include "mbuf.h" |
| #include "log.h" |
| #include "id.h" |
| #include "timer.h" |
| #include "fsm.h" |
| #include "iplist.h" |
| #include "lqr.h" |
| #include "hdlc.h" |
| #include "throughput.h" |
| #include "slcompress.h" |
| #include "ncpaddr.h" |
| #include "ip.h" |
| #include "ipcp.h" |
| #include "filter.h" |
| #include "descriptor.h" |
| #include "route.h" |
| #include "lcp.h" |
| #include "ccp.h" |
| #include "link.h" |
| #include "mp.h" |
| #ifndef NORADIUS |
| #include "radius.h" |
| #endif |
| #include "ipv6cp.h" |
| #include "ncp.h" |
| #include "bundle.h" |
| #include "async.h" |
| #include "physical.h" |
| #include "auth.h" |
| #include "proto.h" |
| #include "chap.h" |
| #include "tun.h" |
| #include "prompt.h" |
| #include "chat.h" |
| #include "cbcp.h" |
| #include "datalink.h" |
| #include "iface.h" |
| #include "server.h" |
| #include "probe.h" |
| #ifndef NODES |
| #include "mppe.h" |
| #endif |
| |
| #define SCATTER_SEGMENTS 7 /* version, datalink, name, physical, |
| throughput, throughput, device */ |
| |
| #define SEND_MAXFD 3 /* Max file descriptors passed through |
| the local domain socket */ |
| |
| static int bundle_RemainingIdleTime(struct bundle *); |
| |
| static const char * const PhaseNames[] = { |
| "Dead", "Establish", "Authenticate", "Network", "Terminate" |
| }; |
| |
| const char * |
| bundle_PhaseName(struct bundle *bundle) |
| { |
| return bundle->phase <= PHASE_TERMINATE ? |
| PhaseNames[bundle->phase] : "unknown"; |
| } |
| |
| void |
| bundle_NewPhase(struct bundle *bundle, u_int new) |
| { |
| if (new == bundle->phase) |
| return; |
| |
| if (new <= PHASE_TERMINATE) |
| log_Printf(LogPHASE, "bundle: %s\n", PhaseNames[new]); |
| |
| switch (new) { |
| case PHASE_DEAD: |
| bundle->phase = new; |
| #ifndef NODES |
| MPPE_MasterKeyValid = 0; |
| #endif |
| log_DisplayPrompts(); |
| break; |
| |
| case PHASE_ESTABLISH: |
| bundle->phase = new; |
| break; |
| |
| case PHASE_AUTHENTICATE: |
| bundle->phase = new; |
| log_DisplayPrompts(); |
| break; |
| |
| case PHASE_NETWORK: |
| if (ncp_fsmStart(&bundle->ncp, bundle)) { |
| bundle->phase = new; |
| log_DisplayPrompts(); |
| } else { |
| log_Printf(LogPHASE, "bundle: All NCPs are disabled\n"); |
| bundle_Close(bundle, NULL, CLOSE_STAYDOWN); |
| } |
| break; |
| |
| case PHASE_TERMINATE: |
| bundle->phase = new; |
| mp_Down(&bundle->ncp.mp); |
| log_DisplayPrompts(); |
| break; |
| } |
| } |
| |
| static void |
| bundle_LayerStart(void *v __unused, struct fsm *fp __unused) |
| { |
| /* The given FSM is about to start up ! */ |
| } |
| |
| |
| void |
| bundle_Notify(struct bundle *bundle, char c) |
| { |
| if (bundle->notify.fd != -1) { |
| int ret; |
| |
| ret = write(bundle->notify.fd, &c, 1); |
| if (c != EX_REDIAL && c != EX_RECONNECT) { |
| if (ret == 1) |
| log_Printf(LogCHAT, "Parent notified of %s\n", |
| c == EX_NORMAL ? "success" : "failure"); |
| else |
| log_Printf(LogERROR, "Failed to notify parent of success\n"); |
| close(bundle->notify.fd); |
| bundle->notify.fd = -1; |
| } else if (ret == 1) |
| log_Printf(LogCHAT, "Parent notified of %s\n", ex_desc(c)); |
| else |
| log_Printf(LogERROR, "Failed to notify parent of %s\n", ex_desc(c)); |
| } |
| } |
| |
| static void |
| bundle_ClearQueues(void *v) |
| { |
| struct bundle *bundle = (struct bundle *)v; |
| struct datalink *dl; |
| |
| log_Printf(LogPHASE, "Clearing choked output queue\n"); |
| timer_Stop(&bundle->choked.timer); |
| |
| /* |
| * Emergency time: |
| * |
| * We've had a full queue for PACKET_DEL_SECS seconds without being |
| * able to get rid of any of the packets. We've probably given up |
| * on the redials at this point, and the queued data has almost |
| * definitely been timed out by the layer above. As this is preventing |
| * us from reading the TUN_NAME device (we don't want to buffer stuff |
| * indefinitely), we may as well nuke this data and start with a clean |
| * slate ! |
| * |
| * Unfortunately, this has the side effect of shafting any compression |
| * dictionaries in use (causing the relevant RESET_REQ/RESET_ACK). |
| */ |
| |
| ncp_DeleteQueues(&bundle->ncp); |
| for (dl = bundle->links; dl; dl = dl->next) |
| physical_DeleteQueue(dl->physical); |
| } |
| |
| static void |
| bundle_LinkAdded(struct bundle *bundle, struct datalink *dl) |
| { |
| bundle->phys_type.all |= dl->physical->type; |
| if (dl->state == DATALINK_OPEN) |
| bundle->phys_type.open |= dl->physical->type; |
| |
| #ifndef NORADIUS |
| if ((bundle->phys_type.open & (PHYS_DEDICATED|PHYS_DDIAL)) |
| != bundle->phys_type.open && bundle->session.timer.state == TIMER_STOPPED) |
| if (bundle->radius.sessiontime) |
| bundle_StartSessionTimer(bundle, 0); |
| #endif |
| |
| if ((bundle->phys_type.open & (PHYS_DEDICATED|PHYS_DDIAL)) |
| != bundle->phys_type.open && bundle->idle.timer.state == TIMER_STOPPED) |
| /* We may need to start our idle timer */ |
| bundle_StartIdleTimer(bundle, 0); |
| } |
| |
| void |
| bundle_LinksRemoved(struct bundle *bundle) |
| { |
| struct datalink *dl; |
| |
| bundle->phys_type.all = bundle->phys_type.open = 0; |
| for (dl = bundle->links; dl; dl = dl->next) |
| bundle_LinkAdded(bundle, dl); |
| |
| bundle_CalculateBandwidth(bundle); |
| mp_CheckAutoloadTimer(&bundle->ncp.mp); |
| |
| if ((bundle->phys_type.open & (PHYS_DEDICATED|PHYS_DDIAL)) |
| == bundle->phys_type.open) { |
| #ifndef NORADIUS |
| if (bundle->radius.sessiontime) |
| bundle_StopSessionTimer(bundle); |
| #endif |
| bundle_StopIdleTimer(bundle); |
| } |
| } |
| |
| static void |
| bundle_LayerUp(void *v, struct fsm *fp) |
| { |
| /* |
| * The given fsm is now up |
| * If it's an LCP, adjust our phys_mode.open value and check the |
| * autoload timer. |
| * If it's the first NCP, calculate our bandwidth |
| * If it's the first NCP, set our ``upat'' time |
| * If it's the first NCP, start the idle timer. |
| * If it's an NCP, tell our -background parent to go away. |
| * If it's the first NCP, start the autoload timer |
| */ |
| struct bundle *bundle = (struct bundle *)v; |
| |
| if (fp->proto == PROTO_LCP) { |
| struct physical *p = link2physical(fp->link); |
| |
| bundle_LinkAdded(bundle, p->dl); |
| mp_CheckAutoloadTimer(&bundle->ncp.mp); |
| } else if (isncp(fp->proto)) { |
| if (ncp_LayersOpen(&fp->bundle->ncp) == 1) { |
| bundle_CalculateBandwidth(fp->bundle); |
| time(&bundle->upat); |
| #ifndef NORADIUS |
| if (bundle->radius.sessiontime) |
| bundle_StartSessionTimer(bundle, 0); |
| #endif |
| bundle_StartIdleTimer(bundle, 0); |
| mp_CheckAutoloadTimer(&fp->bundle->ncp.mp); |
| } |
| bundle_Notify(bundle, EX_NORMAL); |
| } else if (fp->proto == PROTO_CCP) |
| bundle_CalculateBandwidth(fp->bundle); /* Against ccp_MTUOverhead */ |
| } |
| |
| static void |
| bundle_LayerDown(void *v, struct fsm *fp) |
| { |
| /* |
| * The given FSM has been told to come down. |
| * If it's our last NCP, stop the idle timer. |
| * If it's our last NCP, clear our ``upat'' value. |
| * If it's our last NCP, stop the autoload timer |
| * If it's an LCP, adjust our phys_type.open value and any timers. |
| * If it's an LCP and we're in multilink mode, adjust our tun |
| * If it's the last LCP, down all NCPs |
| * speed and make sure our minimum sequence number is adjusted. |
| */ |
| |
| struct bundle *bundle = (struct bundle *)v; |
| |
| if (isncp(fp->proto)) { |
| if (ncp_LayersOpen(&fp->bundle->ncp) == 0) { |
| #ifndef NORADIUS |
| if (bundle->radius.sessiontime) |
| bundle_StopSessionTimer(bundle); |
| #endif |
| bundle_StopIdleTimer(bundle); |
| bundle->upat = 0; |
| mp_StopAutoloadTimer(&bundle->ncp.mp); |
| } |
| } else if (fp->proto == PROTO_LCP) { |
| struct datalink *dl; |
| struct datalink *lost; |
| int others_active; |
| |
| bundle_LinksRemoved(bundle); /* adjust timers & phys_type values */ |
| |
| lost = NULL; |
| others_active = 0; |
| for (dl = bundle->links; dl; dl = dl->next) { |
| if (fp == &dl->physical->link.lcp.fsm) |
| lost = dl; |
| else if (dl->state != DATALINK_CLOSED && dl->state != DATALINK_HANGUP) |
| others_active++; |
| } |
| |
| if (bundle->ncp.mp.active) { |
| bundle_CalculateBandwidth(bundle); |
| |
| if (lost) |
| mp_LinkLost(&bundle->ncp.mp, lost); |
| else |
| log_Printf(LogALERT, "Oops, lost an unrecognised datalink (%s) !\n", |
| fp->link->name); |
| } |
| |
| if (!others_active) { |
| /* Down the NCPs. We don't expect to get fsm_Close()d ourself ! */ |
| ncp2initial(&bundle->ncp); |
| mp_Down(&bundle->ncp.mp); |
| } |
| } |
| } |
| |
| static void |
| bundle_LayerFinish(void *v, struct fsm *fp) |
| { |
| /* The given fsm is now down (fp cannot be NULL) |
| * |
| * If it's the last NCP, fsm_Close all LCPs |
| * If it's the last NCP, bring any MP layer down |
| */ |
| |
| struct bundle *bundle = (struct bundle *)v; |
| struct datalink *dl; |
| |
| if (isncp(fp->proto) && !ncp_LayersUnfinished(&bundle->ncp)) { |
| if (bundle_Phase(bundle) != PHASE_DEAD) |
| bundle_NewPhase(bundle, PHASE_TERMINATE); |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (dl->state == DATALINK_OPEN) |
| datalink_Close(dl, CLOSE_STAYDOWN); |
| fsm2initial(fp); |
| mp_Down(&bundle->ncp.mp); |
| } |
| } |
| |
| void |
| bundle_Close(struct bundle *bundle, const char *name, int how) |
| { |
| /* |
| * Please close the given datalink. |
| * If name == NULL or name is the last datalink, fsm_Close all NCPs |
| * (except our MP) |
| * If it isn't the last datalink, just Close that datalink. |
| */ |
| |
| struct datalink *dl, *this_dl; |
| int others_active; |
| |
| others_active = 0; |
| this_dl = NULL; |
| |
| for (dl = bundle->links; dl; dl = dl->next) { |
| if (name && !strcasecmp(name, dl->name)) |
| this_dl = dl; |
| if (name == NULL || this_dl == dl) { |
| switch (how) { |
| case CLOSE_LCP: |
| datalink_DontHangup(dl); |
| break; |
| case CLOSE_STAYDOWN: |
| datalink_StayDown(dl); |
| break; |
| } |
| } else if (dl->state != DATALINK_CLOSED && dl->state != DATALINK_HANGUP) |
| others_active++; |
| } |
| |
| if (name && this_dl == NULL) { |
| log_Printf(LogWARN, "%s: Invalid datalink name\n", name); |
| return; |
| } |
| |
| if (!others_active) { |
| #ifndef NORADIUS |
| if (bundle->radius.sessiontime) |
| bundle_StopSessionTimer(bundle); |
| #endif |
| bundle_StopIdleTimer(bundle); |
| if (ncp_LayersUnfinished(&bundle->ncp)) |
| ncp_Close(&bundle->ncp); |
| else { |
| ncp2initial(&bundle->ncp); |
| mp_Down(&bundle->ncp.mp); |
| for (dl = bundle->links; dl; dl = dl->next) |
| datalink_Close(dl, how); |
| } |
| } else if (this_dl && this_dl->state != DATALINK_CLOSED && |
| this_dl->state != DATALINK_HANGUP) |
| datalink_Close(this_dl, how); |
| } |
| |
| void |
| bundle_Down(struct bundle *bundle, int how) |
| { |
| struct datalink *dl; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| datalink_Down(dl, how); |
| } |
| |
| static int |
| bundle_UpdateSet(struct fdescriptor *d, fd_set *r, fd_set *w, fd_set *e, int *n) |
| { |
| struct bundle *bundle = descriptor2bundle(d); |
| struct datalink *dl; |
| int result, nlinks; |
| u_short ifqueue; |
| size_t queued; |
| |
| result = 0; |
| |
| /* If there are aren't many packets queued, look for some more. */ |
| for (nlinks = 0, dl = bundle->links; dl; dl = dl->next) |
| nlinks++; |
| |
| if (nlinks) { |
| queued = r ? ncp_FillPhysicalQueues(&bundle->ncp, bundle) : |
| ncp_QueueLen(&bundle->ncp); |
| |
| if (r && (bundle->phase == PHASE_NETWORK || |
| bundle->phys_type.all & PHYS_AUTO)) { |
| /* enough surplus so that we can tell if we're getting swamped */ |
| ifqueue = nlinks > bundle->cfg.ifqueue ? nlinks : bundle->cfg.ifqueue; |
| if (queued < ifqueue) { |
| /* Not enough - select() for more */ |
| if (bundle->choked.timer.state == TIMER_RUNNING) |
| timer_Stop(&bundle->choked.timer); /* Not needed any more */ |
| FD_SET(bundle->dev.fd, r); |
| if (*n < bundle->dev.fd + 1) |
| *n = bundle->dev.fd + 1; |
| log_Printf(LogTIMER, "%s: fdset(r) %d\n", TUN_NAME, bundle->dev.fd); |
| result++; |
| } else if (bundle->choked.timer.state == TIMER_STOPPED) { |
| bundle->choked.timer.func = bundle_ClearQueues; |
| bundle->choked.timer.name = "output choke"; |
| bundle->choked.timer.load = bundle->cfg.choked.timeout * SECTICKS; |
| bundle->choked.timer.arg = bundle; |
| timer_Start(&bundle->choked.timer); |
| } |
| } |
| } |
| |
| #ifndef NORADIUS |
| result += descriptor_UpdateSet(&bundle->radius.desc, r, w, e, n); |
| #endif |
| |
| /* Which links need a select() ? */ |
| for (dl = bundle->links; dl; dl = dl->next) |
| result += descriptor_UpdateSet(&dl->desc, r, w, e, n); |
| |
| /* |
| * This *MUST* be called after the datalink UpdateSet()s as it |
| * might be ``holding'' one of the datalinks (death-row) and |
| * wants to be able to de-select() it from the descriptor set. |
| */ |
| result += descriptor_UpdateSet(&bundle->ncp.mp.server.desc, r, w, e, n); |
| |
| return result; |
| } |
| |
| static int |
| bundle_IsSet(struct fdescriptor *d, const fd_set *fdset) |
| { |
| struct bundle *bundle = descriptor2bundle(d); |
| struct datalink *dl; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (descriptor_IsSet(&dl->desc, fdset)) |
| return 1; |
| |
| #ifndef NORADIUS |
| if (descriptor_IsSet(&bundle->radius.desc, fdset)) |
| return 1; |
| #endif |
| |
| if (descriptor_IsSet(&bundle->ncp.mp.server.desc, fdset)) |
| return 1; |
| |
| return FD_ISSET(bundle->dev.fd, fdset); |
| } |
| |
| static void |
| bundle_DescriptorRead(struct fdescriptor *d __unused, struct bundle *bundle, |
| const fd_set *fdset) |
| { |
| struct datalink *dl; |
| unsigned secs; |
| u_int32_t af; |
| |
| if (descriptor_IsSet(&bundle->ncp.mp.server.desc, fdset)) |
| descriptor_Read(&bundle->ncp.mp.server.desc, bundle, fdset); |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (descriptor_IsSet(&dl->desc, fdset)) |
| descriptor_Read(&dl->desc, bundle, fdset); |
| |
| #ifndef NORADIUS |
| if (descriptor_IsSet(&bundle->radius.desc, fdset)) |
| descriptor_Read(&bundle->radius.desc, bundle, fdset); |
| #endif |
| |
| if (FD_ISSET(bundle->dev.fd, fdset)) { |
| struct tun_data tun; |
| int n, pri; |
| u_char *data; |
| size_t sz; |
| |
| if (bundle->dev.header) { |
| data = (u_char *)&tun; |
| sz = sizeof tun; |
| } else { |
| data = tun.data; |
| sz = sizeof tun.data; |
| } |
| |
| /* something to read from tun */ |
| |
| n = read(bundle->dev.fd, data, sz); |
| if (n < 0) { |
| log_Printf(LogWARN, "%s: read: %s\n", bundle->dev.Name, strerror(errno)); |
| return; |
| } |
| |
| if (bundle->dev.header) { |
| n -= sz - sizeof tun.data; |
| if (n <= 0) { |
| log_Printf(LogERROR, "%s: read: Got only %d bytes of data !\n", |
| bundle->dev.Name, n); |
| return; |
| } |
| af = ntohl(tun.header.family); |
| #ifndef NOINET6 |
| if (af != AF_INET && af != AF_INET6) |
| #else |
| if (af != AF_INET) |
| #endif |
| /* XXX: Should be maintaining drop/family counts ! */ |
| return; |
| } else |
| af = AF_INET; |
| |
| if (af == AF_INET && ((struct ip *)tun.data)->ip_dst.s_addr == |
| bundle->ncp.ipcp.my_ip.s_addr) { |
| /* we've been asked to send something addressed *to* us :( */ |
| if (Enabled(bundle, OPT_LOOPBACK)) { |
| pri = PacketCheck(bundle, af, tun.data, n, &bundle->filter.in, |
| NULL, NULL); |
| if (pri >= 0) { |
| n += sz - sizeof tun.data; |
| write(bundle->dev.fd, data, n); |
| log_Printf(LogDEBUG, "Looped back packet addressed to myself\n"); |
| } |
| return; |
| } else |
| log_Printf(LogDEBUG, "Oops - forwarding packet addressed to myself\n"); |
| } |
| |
| /* |
| * Process on-demand dialup. Output packets are queued within the tunnel |
| * device until the appropriate NCP is opened. |
| */ |
| |
| if (bundle_Phase(bundle) == PHASE_DEAD) { |
| /* |
| * Note, we must be in AUTO mode :-/ otherwise our interface should |
| * *not* be UP and we can't receive data |
| */ |
| pri = PacketCheck(bundle, af, tun.data, n, &bundle->filter.dial, |
| NULL, NULL); |
| if (pri >= 0) |
| bundle_Open(bundle, NULL, PHYS_AUTO, 0); |
| else |
| /* |
| * Drop the packet. If we were to queue it, we'd just end up with |
| * a pile of timed-out data in our output queue by the time we get |
| * around to actually dialing. We'd also prematurely reach the |
| * threshold at which we stop select()ing to read() the tun |
| * device - breaking auto-dial. |
| */ |
| return; |
| } |
| |
| secs = 0; |
| pri = PacketCheck(bundle, af, tun.data, n, &bundle->filter.out, |
| NULL, &secs); |
| if (pri >= 0) { |
| /* Prepend the number of seconds timeout given in the filter */ |
| tun.header.timeout = secs; |
| ncp_Enqueue(&bundle->ncp, af, pri, (char *)&tun, n + sizeof tun.header); |
| } |
| } |
| } |
| |
| static int |
| bundle_DescriptorWrite(struct fdescriptor *d __unused, struct bundle *bundle, |
| const fd_set *fdset) |
| { |
| struct datalink *dl; |
| int result = 0; |
| |
| /* This is not actually necessary as struct mpserver doesn't Write() */ |
| if (descriptor_IsSet(&bundle->ncp.mp.server.desc, fdset)) |
| if (descriptor_Write(&bundle->ncp.mp.server.desc, bundle, fdset) == 1) |
| result++; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (descriptor_IsSet(&dl->desc, fdset)) |
| switch (descriptor_Write(&dl->desc, bundle, fdset)) { |
| case -1: |
| datalink_ComeDown(dl, CLOSE_NORMAL); |
| break; |
| case 1: |
| result++; |
| } |
| |
| return result; |
| } |
| |
| void |
| bundle_LockTun(struct bundle *bundle) |
| { |
| FILE *lockfile; |
| char pidfile[PATH_MAX]; |
| |
| snprintf(pidfile, sizeof pidfile, "%stun%d.pid", _PATH_VARRUN, bundle->unit); |
| lockfile = ID0fopen(pidfile, "w"); |
| if (lockfile != NULL) { |
| fprintf(lockfile, "%d\n", (int)getpid()); |
| fclose(lockfile); |
| } |
| #ifndef RELEASE_CRUNCH |
| else |
| log_Printf(LogERROR, "Warning: Can't create %s: %s\n", |
| pidfile, strerror(errno)); |
| #endif |
| } |
| |
| static void |
| bundle_UnlockTun(struct bundle *bundle) |
| { |
| char pidfile[PATH_MAX]; |
| |
| snprintf(pidfile, sizeof pidfile, "%stun%d.pid", _PATH_VARRUN, bundle->unit); |
| ID0unlink(pidfile); |
| } |
| |
| struct bundle * |
| bundle_Create(const char *prefix, int type, int unit) |
| { |
| static struct bundle bundle; /* there can be only one */ |
| int enoentcount, err, minunit, maxunit; |
| const char *ifname; |
| #if defined(__FreeBSD__) && !defined(NOKLDLOAD) |
| int kldtried; |
| #endif |
| #if defined(TUNSIFMODE) || defined(TUNSLMODE) || defined(TUNSIFHEAD) |
| int iff; |
| #endif |
| |
| if (bundle.iface != NULL) { /* Already allocated ! */ |
| log_Printf(LogALERT, "bundle_Create: There's only one BUNDLE !\n"); |
| return NULL; |
| } |
| |
| if (unit == -1) { |
| minunit = 0; |
| maxunit = -1; |
| } else { |
| minunit = unit; |
| maxunit = unit + 1; |
| } |
| err = ENOENT; |
| enoentcount = 0; |
| #if defined(__FreeBSD__) && !defined(NOKLDLOAD) |
| kldtried = 0; |
| #endif |
| for (bundle.unit = minunit; bundle.unit != maxunit; bundle.unit++) { |
| snprintf(bundle.dev.Name, sizeof bundle.dev.Name, "%s%d", |
| prefix, bundle.unit); |
| bundle.dev.fd = ID0open(bundle.dev.Name, O_RDWR); |
| if (bundle.dev.fd >= 0) |
| break; |
| else if (errno == ENXIO || errno == ENOENT) { |
| #if defined(__FreeBSD__) && !defined(NOKLDLOAD) |
| if (bundle.unit == minunit && !kldtried++) { |
| /* |
| * Attempt to load the tunnel interface KLD if it isn't loaded |
| * already. |
| */ |
| if (loadmodules(LOAD_VERBOSLY, "if_tun", NULL)) |
| bundle.unit--; |
| continue; |
| } |
| #endif |
| if (errno != ENOENT || ++enoentcount > 2) { |
| err = errno; |
| break; |
| } |
| } else |
| err = errno; |
| } |
| |
| if (bundle.dev.fd < 0) { |
| if (unit == -1) |
| log_Printf(LogWARN, "No available tunnel devices found (%s)\n", |
| strerror(err)); |
| else |
| log_Printf(LogWARN, "%s%d: %s\n", prefix, unit, strerror(err)); |
| return NULL; |
| } |
| |
| log_SetTun(bundle.unit); |
| |
| ifname = strrchr(bundle.dev.Name, '/'); |
| if (ifname == NULL) |
| ifname = bundle.dev.Name; |
| else |
| ifname++; |
| |
| bundle.iface = iface_Create(ifname); |
| if (bundle.iface == NULL) { |
| close(bundle.dev.fd); |
| return NULL; |
| } |
| |
| #ifdef TUNSIFMODE |
| /* Make sure we're POINTOPOINT & IFF_MULTICAST */ |
| iff = IFF_POINTOPOINT | IFF_MULTICAST; |
| if (ID0ioctl(bundle.dev.fd, TUNSIFMODE, &iff) < 0) |
| log_Printf(LogERROR, "bundle_Create: ioctl(TUNSIFMODE): %s\n", |
| strerror(errno)); |
| #endif |
| |
| #ifdef TUNSLMODE |
| /* Make sure we're not prepending sockaddrs */ |
| iff = 0; |
| if (ID0ioctl(bundle.dev.fd, TUNSLMODE, &iff) < 0) |
| log_Printf(LogERROR, "bundle_Create: ioctl(TUNSLMODE): %s\n", |
| strerror(errno)); |
| #endif |
| |
| #ifdef TUNSIFHEAD |
| /* We want the address family please ! */ |
| iff = 1; |
| if (ID0ioctl(bundle.dev.fd, TUNSIFHEAD, &iff) < 0) { |
| log_Printf(LogERROR, "bundle_Create: ioctl(TUNSIFHEAD): %s\n", |
| strerror(errno)); |
| bundle.dev.header = 0; |
| } else |
| bundle.dev.header = 1; |
| #else |
| #ifdef __OpenBSD__ |
| /* Always present for OpenBSD */ |
| bundle.dev.header = 1; |
| #else |
| /* |
| * If TUNSIFHEAD isn't available and we're not OpenBSD, assume |
| * everything's AF_INET (hopefully the tun device won't pass us |
| * anything else !). |
| */ |
| bundle.dev.header = 0; |
| #endif |
| #endif |
| |
| log_Printf(LogPHASE, "Using interface: %s\n", ifname); |
| |
| bundle.bandwidth = 0; |
| bundle.routing_seq = 0; |
| bundle.phase = PHASE_DEAD; |
| bundle.CleaningUp = 0; |
| bundle.NatEnabled = 0; |
| |
| bundle.fsm.LayerStart = bundle_LayerStart; |
| bundle.fsm.LayerUp = bundle_LayerUp; |
| bundle.fsm.LayerDown = bundle_LayerDown; |
| bundle.fsm.LayerFinish = bundle_LayerFinish; |
| bundle.fsm.object = &bundle; |
| |
| bundle.cfg.idle.timeout = NCP_IDLE_TIMEOUT; |
| bundle.cfg.idle.min_timeout = 0; |
| *bundle.cfg.auth.name = '\0'; |
| *bundle.cfg.auth.key = '\0'; |
| bundle.cfg.optmask = (1ull << OPT_IDCHECK) | (1ull << OPT_LOOPBACK) | |
| (1ull << OPT_SROUTES) | (1ull << OPT_TCPMSSFIXUP) | |
| (1ull << OPT_THROUGHPUT) | (1ull << OPT_UTMP) | |
| (1ull << OPT_NAS_IP_ADDRESS) | |
| (1ull << OPT_NAS_IDENTIFIER); |
| #ifndef NOINET6 |
| opt_enable(&bundle, OPT_IPCP); |
| if (probe.ipv6_available) |
| opt_enable(&bundle, OPT_IPV6CP); |
| #endif |
| *bundle.cfg.label = '\0'; |
| bundle.cfg.ifqueue = DEF_IFQUEUE; |
| bundle.cfg.choked.timeout = CHOKED_TIMEOUT; |
| bundle.phys_type.all = type; |
| bundle.phys_type.open = 0; |
| bundle.upat = 0; |
| |
| bundle.links = datalink_Create("deflink", &bundle, type); |
| if (bundle.links == NULL) { |
| log_Printf(LogALERT, "Cannot create data link: %s\n", strerror(errno)); |
| iface_Destroy(bundle.iface); |
| bundle.iface = NULL; |
| close(bundle.dev.fd); |
| return NULL; |
| } |
| |
| bundle.desc.type = BUNDLE_DESCRIPTOR; |
| bundle.desc.UpdateSet = bundle_UpdateSet; |
| bundle.desc.IsSet = bundle_IsSet; |
| bundle.desc.Read = bundle_DescriptorRead; |
| bundle.desc.Write = bundle_DescriptorWrite; |
| |
| ncp_Init(&bundle.ncp, &bundle); |
| |
| memset(&bundle.filter, '\0', sizeof bundle.filter); |
| bundle.filter.in.fragok = bundle.filter.in.logok = 1; |
| bundle.filter.in.name = "IN"; |
| bundle.filter.out.fragok = bundle.filter.out.logok = 1; |
| bundle.filter.out.name = "OUT"; |
| bundle.filter.dial.name = "DIAL"; |
| bundle.filter.dial.logok = 1; |
| bundle.filter.alive.name = "ALIVE"; |
| bundle.filter.alive.logok = 1; |
| { |
| int i; |
| for (i = 0; i < MAXFILTERS; i++) { |
| bundle.filter.in.rule[i].f_action = A_NONE; |
| bundle.filter.out.rule[i].f_action = A_NONE; |
| bundle.filter.dial.rule[i].f_action = A_NONE; |
| bundle.filter.alive.rule[i].f_action = A_NONE; |
| } |
| } |
| memset(&bundle.idle.timer, '\0', sizeof bundle.idle.timer); |
| bundle.idle.done = 0; |
| bundle.notify.fd = -1; |
| memset(&bundle.choked.timer, '\0', sizeof bundle.choked.timer); |
| #ifndef NORADIUS |
| radius_Init(&bundle.radius); |
| #endif |
| |
| /* Clean out any leftover crud */ |
| iface_Clear(bundle.iface, &bundle.ncp, 0, IFACE_CLEAR_ALL); |
| |
| bundle_LockTun(&bundle); |
| |
| return &bundle; |
| } |
| |
| static void |
| bundle_DownInterface(struct bundle *bundle) |
| { |
| route_IfDelete(bundle, 1); |
| iface_ClearFlags(bundle->iface->name, IFF_UP); |
| } |
| |
| void |
| bundle_Destroy(struct bundle *bundle) |
| { |
| struct datalink *dl; |
| |
| /* |
| * Clean up the interface. We don't really need to do the timer_Stop()s, |
| * mp_Down(), iface_Clear() and bundle_DownInterface() unless we're getting |
| * out under exceptional conditions such as a descriptor exception. |
| */ |
| timer_Stop(&bundle->idle.timer); |
| timer_Stop(&bundle->choked.timer); |
| mp_Down(&bundle->ncp.mp); |
| iface_Clear(bundle->iface, &bundle->ncp, 0, IFACE_CLEAR_ALL); |
| bundle_DownInterface(bundle); |
| |
| #ifndef NORADIUS |
| /* Tell the radius server the bad news */ |
| radius_Destroy(&bundle->radius); |
| #endif |
| |
| /* Again, these are all DATALINK_CLOSED unless we're abending */ |
| dl = bundle->links; |
| while (dl) |
| dl = datalink_Destroy(dl); |
| |
| ncp_Destroy(&bundle->ncp); |
| |
| close(bundle->dev.fd); |
| bundle_UnlockTun(bundle); |
| |
| /* In case we never made PHASE_NETWORK */ |
| bundle_Notify(bundle, EX_ERRDEAD); |
| |
| iface_Destroy(bundle->iface); |
| bundle->iface = NULL; |
| } |
| |
| void |
| bundle_LinkClosed(struct bundle *bundle, struct datalink *dl) |
| { |
| /* |
| * Our datalink has closed. |
| * CleanDatalinks() (called from DoLoop()) will remove closed |
| * BACKGROUND, FOREGROUND and DIRECT links. |
| * If it's the last data link, enter phase DEAD. |
| * |
| * NOTE: dl may not be in our list (bundle_SendDatalink()) ! |
| */ |
| |
| struct datalink *odl; |
| int other_links; |
| |
| log_SetTtyCommandMode(dl); |
| |
| other_links = 0; |
| for (odl = bundle->links; odl; odl = odl->next) |
| if (odl != dl && odl->state != DATALINK_CLOSED) |
| other_links++; |
| |
| if (!other_links) { |
| if (dl->physical->type != PHYS_AUTO) /* Not in -auto mode */ |
| bundle_DownInterface(bundle); |
| ncp2initial(&bundle->ncp); |
| mp_Down(&bundle->ncp.mp); |
| bundle_NewPhase(bundle, PHASE_DEAD); |
| #ifndef NORADIUS |
| if (bundle->radius.sessiontime) |
| bundle_StopSessionTimer(bundle); |
| #endif |
| bundle_StopIdleTimer(bundle); |
| } |
| } |
| |
| void |
| bundle_Open(struct bundle *bundle, const char *name, int mask, int force) |
| { |
| /* |
| * Please open the given datalink, or all if name == NULL |
| */ |
| struct datalink *dl; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (name == NULL || !strcasecmp(dl->name, name)) { |
| if ((mask & dl->physical->type) && |
| (dl->state == DATALINK_CLOSED || |
| (force && dl->state == DATALINK_OPENING && |
| dl->dial.timer.state == TIMER_RUNNING) || |
| dl->state == DATALINK_READY)) { |
| timer_Stop(&dl->dial.timer); /* We're finished with this */ |
| datalink_Up(dl, 1, 1); |
| if (mask & PHYS_AUTO) |
| break; /* Only one AUTO link at a time */ |
| } |
| if (name != NULL) |
| break; |
| } |
| } |
| |
| struct datalink * |
| bundle2datalink(struct bundle *bundle, const char *name) |
| { |
| struct datalink *dl; |
| |
| if (name != NULL) { |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (!strcasecmp(dl->name, name)) |
| return dl; |
| } else if (bundle->links && !bundle->links->next) |
| return bundle->links; |
| |
| return NULL; |
| } |
| |
| int |
| bundle_ShowLinks(struct cmdargs const *arg) |
| { |
| struct datalink *dl; |
| struct pppThroughput *t; |
| unsigned long long octets; |
| int secs; |
| |
| for (dl = arg->bundle->links; dl; dl = dl->next) { |
| octets = MAX(dl->physical->link.stats.total.in.OctetsPerSecond, |
| dl->physical->link.stats.total.out.OctetsPerSecond); |
| |
| prompt_Printf(arg->prompt, "Name: %s [%s, %s]", |
| dl->name, mode2Nam(dl->physical->type), datalink_State(dl)); |
| if (dl->physical->link.stats.total.rolling && dl->state == DATALINK_OPEN) |
| prompt_Printf(arg->prompt, " bandwidth %d, %llu bps (%llu bytes/sec)", |
| dl->mp.bandwidth ? dl->mp.bandwidth : |
| physical_GetSpeed(dl->physical), |
| octets * 8, octets); |
| prompt_Printf(arg->prompt, "\n"); |
| } |
| |
| t = &arg->bundle->ncp.mp.link.stats.total; |
| octets = MAX(t->in.OctetsPerSecond, t->out.OctetsPerSecond); |
| secs = t->downtime ? 0 : throughput_uptime(t); |
| if (secs > t->SamplePeriod) |
| secs = t->SamplePeriod; |
| if (secs) |
| prompt_Printf(arg->prompt, "Currently averaging %llu bps (%llu bytes/sec)" |
| " over the last %d secs\n", octets * 8, octets, secs); |
| |
| return 0; |
| } |
| |
| static const char * |
| optval(struct bundle *bundle, int opt) |
| { |
| return Enabled(bundle, opt) ? "enabled" : "disabled"; |
| } |
| |
| int |
| bundle_ShowStatus(struct cmdargs const *arg) |
| { |
| int remaining; |
| |
| prompt_Printf(arg->prompt, "Phase %s\n", bundle_PhaseName(arg->bundle)); |
| prompt_Printf(arg->prompt, " Device: %s\n", arg->bundle->dev.Name); |
| prompt_Printf(arg->prompt, " Interface: %s @ %lubps", |
| arg->bundle->iface->name, arg->bundle->bandwidth); |
| |
| if (arg->bundle->upat) { |
| int secs = bundle_Uptime(arg->bundle); |
| |
| prompt_Printf(arg->prompt, ", up time %d:%02d:%02d", secs / 3600, |
| (secs / 60) % 60, secs % 60); |
| } |
| prompt_Printf(arg->prompt, "\n Queued: %lu of %u\n", |
| (unsigned long)ncp_QueueLen(&arg->bundle->ncp), |
| arg->bundle->cfg.ifqueue); |
| |
| prompt_Printf(arg->prompt, "\nDefaults:\n"); |
| prompt_Printf(arg->prompt, " Label: %s\n", |
| arg->bundle->cfg.label); |
| prompt_Printf(arg->prompt, " Auth name: %s\n", |
| arg->bundle->cfg.auth.name); |
| prompt_Printf(arg->prompt, " Diagnostic socket: "); |
| if (*server.cfg.sockname != '\0') { |
| prompt_Printf(arg->prompt, "%s", server.cfg.sockname); |
| if (server.cfg.mask != (mode_t)-1) |
| prompt_Printf(arg->prompt, ", mask 0%03o", (int)server.cfg.mask); |
| prompt_Printf(arg->prompt, "%s\n", server.fd == -1 ? " (not open)" : ""); |
| } else if (server.cfg.port != 0) |
| prompt_Printf(arg->prompt, "TCP port %d%s\n", server.cfg.port, |
| server.fd == -1 ? " (not open)" : ""); |
| else |
| prompt_Printf(arg->prompt, "none\n"); |
| |
| prompt_Printf(arg->prompt, " Choked Timer: %us\n", |
| arg->bundle->cfg.choked.timeout); |
| |
| #ifndef NORADIUS |
| radius_Show(&arg->bundle->radius, arg->prompt); |
| #endif |
| |
| prompt_Printf(arg->prompt, " Idle Timer: "); |
| if (arg->bundle->cfg.idle.timeout) { |
| prompt_Printf(arg->prompt, "%us", arg->bundle->cfg.idle.timeout); |
| if (arg->bundle->cfg.idle.min_timeout) |
| prompt_Printf(arg->prompt, ", min %us", |
| arg->bundle->cfg.idle.min_timeout); |
| remaining = bundle_RemainingIdleTime(arg->bundle); |
| if (remaining != -1) |
| prompt_Printf(arg->prompt, " (%ds remaining)", remaining); |
| prompt_Printf(arg->prompt, "\n"); |
| } else |
| prompt_Printf(arg->prompt, "disabled\n"); |
| |
| prompt_Printf(arg->prompt, " Filter Decap: %-20.20s", |
| optval(arg->bundle, OPT_FILTERDECAP)); |
| prompt_Printf(arg->prompt, " ID check: %s\n", |
| optval(arg->bundle, OPT_IDCHECK)); |
| prompt_Printf(arg->prompt, " Iface-Alias: %-20.20s", |
| optval(arg->bundle, OPT_IFACEALIAS)); |
| #ifndef NOINET6 |
| prompt_Printf(arg->prompt, " IPCP: %s\n", |
| optval(arg->bundle, OPT_IPCP)); |
| prompt_Printf(arg->prompt, " IPV6CP: %-20.20s", |
| optval(arg->bundle, OPT_IPV6CP)); |
| #endif |
| prompt_Printf(arg->prompt, " Keep-Session: %s\n", |
| optval(arg->bundle, OPT_KEEPSESSION)); |
| prompt_Printf(arg->prompt, " Loopback: %-20.20s", |
| optval(arg->bundle, OPT_LOOPBACK)); |
| prompt_Printf(arg->prompt, " PasswdAuth: %s\n", |
| optval(arg->bundle, OPT_PASSWDAUTH)); |
| prompt_Printf(arg->prompt, " Proxy: %-20.20s", |
| optval(arg->bundle, OPT_PROXY)); |
| prompt_Printf(arg->prompt, " Proxyall: %s\n", |
| optval(arg->bundle, OPT_PROXYALL)); |
| prompt_Printf(arg->prompt, " Sticky Routes: %-20.20s", |
| optval(arg->bundle, OPT_SROUTES)); |
| prompt_Printf(arg->prompt, " TCPMSS Fixup: %s\n", |
| optval(arg->bundle, OPT_TCPMSSFIXUP)); |
| prompt_Printf(arg->prompt, " Throughput: %-20.20s", |
| optval(arg->bundle, OPT_THROUGHPUT)); |
| prompt_Printf(arg->prompt, " Utmp Logging: %s\n", |
| optval(arg->bundle, OPT_UTMP)); |
| prompt_Printf(arg->prompt, " NAS-IP-Address: %-20.20s", |
| optval(arg->bundle, OPT_NAS_IP_ADDRESS)); |
| prompt_Printf(arg->prompt, " NAS-Identifier: %s\n", |
| optval(arg->bundle, OPT_NAS_IDENTIFIER)); |
| |
| return 0; |
| } |
| |
| static void |
| bundle_IdleTimeout(void *v) |
| { |
| struct bundle *bundle = (struct bundle *)v; |
| |
| log_Printf(LogPHASE, "Idle timer expired\n"); |
| bundle_StopIdleTimer(bundle); |
| bundle_Close(bundle, NULL, CLOSE_STAYDOWN); |
| } |
| |
| /* |
| * Start Idle timer. If timeout is reached, we call bundle_Close() to |
| * close LCP and link. |
| */ |
| void |
| bundle_StartIdleTimer(struct bundle *bundle, unsigned secs) |
| { |
| timer_Stop(&bundle->idle.timer); |
| if ((bundle->phys_type.open & (PHYS_DEDICATED|PHYS_DDIAL)) != |
| bundle->phys_type.open && bundle->cfg.idle.timeout) { |
| time_t now = time(NULL); |
| |
| if (secs == 0) |
| secs = bundle->cfg.idle.timeout; |
| |
| /* We want at least `secs' */ |
| if (bundle->cfg.idle.min_timeout > secs && bundle->upat) { |
| unsigned up = now - bundle->upat; |
| |
| if (bundle->cfg.idle.min_timeout > up && |
| bundle->cfg.idle.min_timeout - up > (long long)secs) |
| /* Only increase from the current `remaining' value */ |
| secs = bundle->cfg.idle.min_timeout - up; |
| } |
| bundle->idle.timer.func = bundle_IdleTimeout; |
| bundle->idle.timer.name = "idle"; |
| bundle->idle.timer.load = secs * SECTICKS; |
| bundle->idle.timer.arg = bundle; |
| timer_Start(&bundle->idle.timer); |
| bundle->idle.done = now + secs; |
| } |
| } |
| |
| void |
| bundle_SetIdleTimer(struct bundle *bundle, unsigned timeout, |
| unsigned min_timeout) |
| { |
| bundle->cfg.idle.timeout = timeout; |
| bundle->cfg.idle.min_timeout = min_timeout; |
| if (ncp_LayersOpen(&bundle->ncp)) |
| bundle_StartIdleTimer(bundle, 0); |
| } |
| |
| void |
| bundle_StopIdleTimer(struct bundle *bundle) |
| { |
| timer_Stop(&bundle->idle.timer); |
| bundle->idle.done = 0; |
| } |
| |
| static int |
| bundle_RemainingIdleTime(struct bundle *bundle) |
| { |
| if (bundle->idle.done) |
| return bundle->idle.done - time(NULL); |
| return -1; |
| } |
| |
| #ifndef NORADIUS |
| |
| static void |
| bundle_SessionTimeout(void *v) |
| { |
| struct bundle *bundle = (struct bundle *)v; |
| |
| log_Printf(LogPHASE, "Session-Timeout timer expired\n"); |
| bundle_StopSessionTimer(bundle); |
| bundle_Close(bundle, NULL, CLOSE_STAYDOWN); |
| } |
| |
| void |
| bundle_StartSessionTimer(struct bundle *bundle, unsigned secs) |
| { |
| timer_Stop(&bundle->session.timer); |
| if ((bundle->phys_type.open & (PHYS_DEDICATED|PHYS_DDIAL)) != |
| bundle->phys_type.open && bundle->radius.sessiontime) { |
| time_t now = time(NULL); |
| |
| if (secs == 0) |
| secs = bundle->radius.sessiontime; |
| |
| bundle->session.timer.func = bundle_SessionTimeout; |
| bundle->session.timer.name = "session"; |
| bundle->session.timer.load = secs * SECTICKS; |
| bundle->session.timer.arg = bundle; |
| timer_Start(&bundle->session.timer); |
| bundle->session.done = now + secs; |
| } |
| } |
| |
| void |
| bundle_StopSessionTimer(struct bundle *bundle) |
| { |
| timer_Stop(&bundle->session.timer); |
| bundle->session.done = 0; |
| } |
| |
| #endif |
| |
| int |
| bundle_IsDead(struct bundle *bundle) |
| { |
| return !bundle->links || (bundle->phase == PHASE_DEAD && bundle->CleaningUp); |
| } |
| |
| static struct datalink * |
| bundle_DatalinkLinkout(struct bundle *bundle, struct datalink *dl) |
| { |
| struct datalink **dlp; |
| |
| for (dlp = &bundle->links; *dlp; dlp = &(*dlp)->next) |
| if (*dlp == dl) { |
| *dlp = dl->next; |
| dl->next = NULL; |
| bundle_LinksRemoved(bundle); |
| return dl; |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| bundle_DatalinkLinkin(struct bundle *bundle, struct datalink *dl) |
| { |
| struct datalink **dlp = &bundle->links; |
| |
| while (*dlp) |
| dlp = &(*dlp)->next; |
| |
| *dlp = dl; |
| dl->next = NULL; |
| |
| bundle_LinkAdded(bundle, dl); |
| mp_CheckAutoloadTimer(&bundle->ncp.mp); |
| } |
| |
| void |
| bundle_CleanDatalinks(struct bundle *bundle) |
| { |
| struct datalink **dlp = &bundle->links; |
| int found = 0; |
| |
| while (*dlp) |
| if ((*dlp)->state == DATALINK_CLOSED && |
| (*dlp)->physical->type & |
| (PHYS_DIRECT|PHYS_BACKGROUND|PHYS_FOREGROUND)) { |
| *dlp = datalink_Destroy(*dlp); |
| found++; |
| } else |
| dlp = &(*dlp)->next; |
| |
| if (found) |
| bundle_LinksRemoved(bundle); |
| } |
| |
| int |
| bundle_DatalinkClone(struct bundle *bundle, struct datalink *dl, |
| const char *name) |
| { |
| if (bundle2datalink(bundle, name)) { |
| log_Printf(LogWARN, "Clone: %s: name already exists\n", name); |
| return 0; |
| } |
| |
| bundle_DatalinkLinkin(bundle, datalink_Clone(dl, name)); |
| return 1; |
| } |
| |
| void |
| bundle_DatalinkRemove(struct bundle *bundle, struct datalink *dl) |
| { |
| dl = bundle_DatalinkLinkout(bundle, dl); |
| if (dl) |
| datalink_Destroy(dl); |
| } |
| |
| void |
| bundle_SetLabel(struct bundle *bundle, const char *label) |
| { |
| if (label) |
| strncpy(bundle->cfg.label, label, sizeof bundle->cfg.label - 1); |
| else |
| *bundle->cfg.label = '\0'; |
| } |
| |
| const char * |
| bundle_GetLabel(struct bundle *bundle) |
| { |
| return *bundle->cfg.label ? bundle->cfg.label : NULL; |
| } |
| |
| int |
| bundle_LinkSize() |
| { |
| struct iovec iov[SCATTER_SEGMENTS]; |
| int niov, expect, f; |
| |
| iov[0].iov_len = strlen(Version) + 1; |
| iov[0].iov_base = NULL; |
| niov = 1; |
| if (datalink2iov(NULL, iov, &niov, SCATTER_SEGMENTS, NULL, NULL) == -1) { |
| log_Printf(LogERROR, "Cannot determine space required for link\n"); |
| return 0; |
| } |
| |
| for (f = expect = 0; f < niov; f++) |
| expect += iov[f].iov_len; |
| |
| return expect; |
| } |
| |
| void |
| bundle_ReceiveDatalink(struct bundle *bundle, int s) |
| { |
| char cmsgbuf[sizeof(struct cmsghdr) + sizeof(int) * SEND_MAXFD]; |
| int niov, expect, f, *fd, nfd, onfd; |
| ssize_t got; |
| struct iovec iov[SCATTER_SEGMENTS]; |
| struct cmsghdr *cmsg; |
| struct msghdr msg; |
| struct datalink *dl; |
| pid_t pid; |
| |
| log_Printf(LogPHASE, "Receiving datalink\n"); |
| |
| /* |
| * Create our scatter/gather array - passing NULL gets the space |
| * allocation requirement rather than actually flattening the |
| * structures. |
| */ |
| iov[0].iov_len = strlen(Version) + 1; |
| iov[0].iov_base = NULL; |
| niov = 1; |
| if (datalink2iov(NULL, iov, &niov, SCATTER_SEGMENTS, NULL, NULL) == -1) { |
| log_Printf(LogERROR, "Cannot determine space required for link\n"); |
| return; |
| } |
| |
| /* Allocate the scatter/gather array for recvmsg() */ |
| for (f = expect = 0; f < niov; f++) { |
| if ((iov[f].iov_base = malloc(iov[f].iov_len)) == NULL) { |
| log_Printf(LogERROR, "Cannot allocate space to receive link\n"); |
| return; |
| } |
| if (f) |
| expect += iov[f].iov_len; |
| } |
| |
| /* Set up our message */ |
| cmsg = (struct cmsghdr *)cmsgbuf; |
| cmsg->cmsg_len = sizeof cmsgbuf; |
| cmsg->cmsg_level = SOL_SOCKET; |
| cmsg->cmsg_type = 0; |
| |
| memset(&msg, '\0', sizeof msg); |
| msg.msg_name = NULL; |
| msg.msg_namelen = 0; |
| msg.msg_iov = iov; |
| msg.msg_iovlen = 1; /* Only send the version at the first pass */ |
| msg.msg_control = cmsgbuf; |
| msg.msg_controllen = sizeof cmsgbuf; |
| |
| log_Printf(LogDEBUG, "Expecting %u scatter/gather bytes\n", |
| (unsigned)iov[0].iov_len); |
| |
| if ((got = recvmsg(s, &msg, MSG_WAITALL)) != (ssize_t)iov[0].iov_len) { |
| if (got == -1) |
| log_Printf(LogERROR, "Failed recvmsg: %s\n", strerror(errno)); |
| else |
| log_Printf(LogERROR, "Failed recvmsg: Got %zd, not %u\n", |
| got, (unsigned)iov[0].iov_len); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| |
| if (cmsg->cmsg_level != SOL_SOCKET || cmsg->cmsg_type != SCM_RIGHTS) { |
| log_Printf(LogERROR, "Recvmsg: no descriptors received !\n"); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| |
| fd = (int *)CMSG_DATA(cmsg); |
| nfd = ((caddr_t)cmsg + cmsg->cmsg_len - (caddr_t)fd) / sizeof(int); |
| |
| if (nfd < 2) { |
| log_Printf(LogERROR, "Recvmsg: %d descriptor%s received (too few) !\n", |
| nfd, nfd == 1 ? "" : "s"); |
| while (nfd--) |
| close(fd[nfd]); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| |
| /* |
| * We've successfully received two or more open file descriptors |
| * through our socket, plus a version string. Make sure it's the |
| * correct version, and drop the connection if it's not. |
| */ |
| if (strncmp(Version, iov[0].iov_base, iov[0].iov_len)) { |
| log_Printf(LogWARN, "Cannot receive datalink, incorrect version" |
| " (\"%.*s\", not \"%s\")\n", (int)iov[0].iov_len, |
| (char *)iov[0].iov_base, Version); |
| while (nfd--) |
| close(fd[nfd]); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| |
| /* |
| * Everything looks good. Send the other side our process id so that |
| * they can transfer lock ownership, and wait for them to send the |
| * actual link data. |
| */ |
| pid = getpid(); |
| if ((got = write(fd[1], &pid, sizeof pid)) != sizeof pid) { |
| if (got == -1) |
| log_Printf(LogERROR, "Failed write: %s\n", strerror(errno)); |
| else |
| log_Printf(LogERROR, "Failed write: Got %zd, not %d\n", got, |
| (int)(sizeof pid)); |
| while (nfd--) |
| close(fd[nfd]); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| |
| if ((got = readv(fd[1], iov + 1, niov - 1)) != expect) { |
| if (got == -1) |
| log_Printf(LogERROR, "Failed write: %s\n", strerror(errno)); |
| else |
| log_Printf(LogERROR, "Failed write: Got %zd, not %d\n", got, expect); |
| while (nfd--) |
| close(fd[nfd]); |
| while (niov--) |
| free(iov[niov].iov_base); |
| return; |
| } |
| close(fd[1]); |
| |
| onfd = nfd; /* We've got this many in our array */ |
| nfd -= 2; /* Don't include p->fd and our reply descriptor */ |
| niov = 1; /* Skip the version id */ |
| dl = iov2datalink(bundle, iov, &niov, sizeof iov / sizeof *iov, fd[0], |
| fd + 2, &nfd); |
| if (dl) { |
| |
| if (nfd) { |
| log_Printf(LogERROR, "bundle_ReceiveDatalink: Failed to handle %d " |
| "auxiliary file descriptors (%d remain)\n", onfd, nfd); |
| datalink_Destroy(dl); |
| while (nfd--) |
| close(fd[onfd--]); |
| close(fd[0]); |
| } else { |
| bundle_DatalinkLinkin(bundle, dl); |
| datalink_AuthOk(dl); |
| bundle_CalculateBandwidth(dl->bundle); |
| } |
| } else { |
| while (nfd--) |
| close(fd[onfd--]); |
| close(fd[0]); |
| close(fd[1]); |
| } |
| |
| free(iov[0].iov_base); |
| } |
| |
| void |
| bundle_SendDatalink(struct datalink *dl, int s, struct sockaddr_un *sun) |
| { |
| char cmsgbuf[CMSG_SPACE(sizeof(int) * SEND_MAXFD)]; |
| const char *constlock; |
| char *lock; |
| struct cmsghdr *cmsg; |
| struct msghdr msg; |
| struct iovec iov[SCATTER_SEGMENTS]; |
| int niov, f, expect, newsid, fd[SEND_MAXFD], nfd, reply[2]; |
| ssize_t got; |
| pid_t newpid; |
| |
| log_Printf(LogPHASE, "Transmitting datalink %s\n", dl->name); |
| |
| /* Record the base device name for a lock transfer later */ |
| constlock = physical_LockedDevice(dl->physical); |
| if (constlock) { |
| lock = alloca(strlen(constlock) + 1); |
| strcpy(lock, constlock); |
| } else |
| lock = NULL; |
| |
| bundle_LinkClosed(dl->bundle, dl); |
| bundle_DatalinkLinkout(dl->bundle, dl); |
| |
| /* Build our scatter/gather array */ |
| iov[0].iov_len = strlen(Version) + 1; |
| iov[0].iov_base = strdup(Version); |
| niov = 1; |
| nfd = 0; |
| |
| fd[0] = datalink2iov(dl, iov, &niov, SCATTER_SEGMENTS, fd + 2, &nfd); |
| |
| if (fd[0] != -1 && socketpair(AF_UNIX, SOCK_STREAM, PF_UNSPEC, reply) != -1) { |
| /* |
| * fd[1] is used to get the peer process id back, then to confirm that |
| * we've transferred any device locks to that process id. |
| */ |
| fd[1] = reply[1]; |
| |
| nfd += 2; /* Include fd[0] and fd[1] */ |
| memset(&msg, '\0', sizeof msg); |
| |
| msg.msg_name = NULL; |
| msg.msg_namelen = 0; |
| /* |
| * Only send the version to start... We used to send the whole lot, but |
| * this caused problems with our RECVBUF size as a single link is about |
| * 22k ! This way, we should bump into no limits. |
| */ |
| msg.msg_iovlen = 1; |
| msg.msg_iov = iov; |
| msg.msg_control = cmsgbuf; |
| msg.msg_controllen = CMSG_SPACE(sizeof(int) * nfd); |
| msg.msg_flags = 0; |
| |
| cmsg = (struct cmsghdr *)cmsgbuf; |
| cmsg->cmsg_len = msg.msg_controllen; |
| cmsg->cmsg_level = SOL_SOCKET; |
| cmsg->cmsg_type = SCM_RIGHTS; |
| |
| for (f = 0; f < nfd; f++) |
| *((int *)CMSG_DATA(cmsg) + f) = fd[f]; |
| |
| for (f = 1, expect = 0; f < niov; f++) |
| expect += iov[f].iov_len; |
| |
| if (setsockopt(reply[0], SOL_SOCKET, SO_SNDBUF, &expect, sizeof(int)) == -1) |
| log_Printf(LogERROR, "setsockopt(SO_RCVBUF, %d): %s\n", expect, |
| strerror(errno)); |
| if (setsockopt(reply[1], SOL_SOCKET, SO_RCVBUF, &expect, sizeof(int)) == -1) |
| log_Printf(LogERROR, "setsockopt(SO_RCVBUF, %d): %s\n", expect, |
| strerror(errno)); |
| |
| log_Printf(LogDEBUG, "Sending %d descriptor%s and %u bytes in scatter" |
| "/gather array\n", nfd, nfd == 1 ? "" : "s", |
| (unsigned)iov[0].iov_len); |
| |
| if ((got = sendmsg(s, &msg, 0)) == -1) |
| log_Printf(LogERROR, "Failed sendmsg: %s: %s\n", |
| sun->sun_path, strerror(errno)); |
| else if (got != (ssize_t)iov[0].iov_len) |
| log_Printf(LogERROR, "%s: Failed initial sendmsg: Only sent %zd of %u\n", |
| sun->sun_path, got, (unsigned)iov[0].iov_len); |
| else { |
| /* We must get the ACK before closing the descriptor ! */ |
| int res; |
| |
| if ((got = read(reply[0], &newpid, sizeof newpid)) == sizeof newpid) { |
| log_Printf(LogDEBUG, "Received confirmation from pid %ld\n", |
| (long)newpid); |
| if (lock && (res = ID0uu_lock_txfr(lock, newpid)) != UU_LOCK_OK) |
| log_Printf(LogERROR, "uu_lock_txfr: %s\n", uu_lockerr(res)); |
| |
| log_Printf(LogDEBUG, "Transmitting link (%d bytes)\n", expect); |
| if ((got = writev(reply[0], iov + 1, niov - 1)) != expect) { |
| if (got == -1) |
| log_Printf(LogERROR, "%s: Failed writev: %s\n", |
| sun->sun_path, strerror(errno)); |
| else |
| log_Printf(LogERROR, "%s: Failed writev: Wrote %zd of %d\n", |
| sun->sun_path, got, expect); |
| } |
| } else if (got == -1) |
| log_Printf(LogERROR, "%s: Failed socketpair read: %s\n", |
| sun->sun_path, strerror(errno)); |
| else |
| log_Printf(LogERROR, "%s: Failed socketpair read: Got %zd of %d\n", |
| sun->sun_path, got, (int)(sizeof newpid)); |
| } |
| |
| close(reply[0]); |
| close(reply[1]); |
| |
| newsid = Enabled(dl->bundle, OPT_KEEPSESSION) || |
| tcgetpgrp(fd[0]) == getpgrp(); |
| while (nfd) |
| close(fd[--nfd]); |
| if (newsid) |
| bundle_setsid(dl->bundle, got != -1); |
| } |
| close(s); |
| |
| while (niov--) |
| free(iov[niov].iov_base); |
| } |
| |
| int |
| bundle_RenameDatalink(struct bundle *bundle, struct datalink *ndl, |
| const char *name) |
| { |
| struct datalink *dl; |
| |
| if (!strcasecmp(ndl->name, name)) |
| return 1; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (!strcasecmp(dl->name, name)) |
| return 0; |
| |
| datalink_Rename(ndl, name); |
| return 1; |
| } |
| |
| int |
| bundle_SetMode(struct bundle *bundle, struct datalink *dl, int mode) |
| { |
| int omode; |
| |
| omode = dl->physical->type; |
| if (omode == mode) |
| return 1; |
| |
| if (mode == PHYS_AUTO && !(bundle->phys_type.all & PHYS_AUTO)) |
| /* First auto link */ |
| if (bundle->ncp.ipcp.peer_ip.s_addr == INADDR_ANY) { |
| log_Printf(LogWARN, "You must `set ifaddr' or `open' before" |
| " changing mode to %s\n", mode2Nam(mode)); |
| return 0; |
| } |
| |
| if (!datalink_SetMode(dl, mode)) |
| return 0; |
| |
| if (mode == PHYS_AUTO && !(bundle->phys_type.all & PHYS_AUTO) && |
| bundle->phase != PHASE_NETWORK) |
| /* First auto link, we need an interface */ |
| ipcp_InterfaceUp(&bundle->ncp.ipcp); |
| |
| /* Regenerate phys_type and adjust idle timer */ |
| bundle_LinksRemoved(bundle); |
| |
| return 1; |
| } |
| |
| void |
| bundle_setsid(struct bundle *bundle, int holdsession) |
| { |
| /* |
| * Lose the current session. This means getting rid of our pid |
| * too so that the tty device will really go away, and any getty |
| * etc will be allowed to restart. |
| */ |
| pid_t pid, orig; |
| int fds[2]; |
| char done; |
| struct datalink *dl; |
| |
| if (!holdsession && bundle_IsDead(bundle)) { |
| /* |
| * No need to lose our session after all... we're going away anyway |
| * |
| * We should really stop the timer and pause if holdsession is set and |
| * the bundle's dead, but that leaves other resources lying about :-( |
| */ |
| return; |
| } |
| |
| orig = getpid(); |
| if (pipe(fds) == -1) { |
| log_Printf(LogERROR, "pipe: %s\n", strerror(errno)); |
| return; |
| } |
| switch ((pid = fork())) { |
| case -1: |
| log_Printf(LogERROR, "fork: %s\n", strerror(errno)); |
| close(fds[0]); |
| close(fds[1]); |
| return; |
| case 0: |
| close(fds[1]); |
| read(fds[0], &done, 1); /* uu_locks are mine ! */ |
| close(fds[0]); |
| if (pipe(fds) == -1) { |
| log_Printf(LogERROR, "pipe(2): %s\n", strerror(errno)); |
| return; |
| } |
| switch ((pid = fork())) { |
| case -1: |
| log_Printf(LogERROR, "fork(2): %s\n", strerror(errno)); |
| close(fds[0]); |
| close(fds[1]); |
| return; |
| case 0: |
| close(fds[1]); |
| bundle_LockTun(bundle); /* update pid */ |
| read(fds[0], &done, 1); /* uu_locks are mine ! */ |
| close(fds[0]); |
| setsid(); |
| bundle_ChangedPID(bundle); |
| log_Printf(LogDEBUG, "%ld -> %ld: %s session control\n", |
| (long)orig, (long)getpid(), |
| holdsession ? "Passed" : "Dropped"); |
| timer_InitService(0); /* Start the Timer Service */ |
| break; |
| default: |
| close(fds[0]); |
| /* Give away all our physical locks (to the final process) */ |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (dl->state != DATALINK_CLOSED) |
| physical_ChangedPid(dl->physical, pid); |
| write(fds[1], "!", 1); /* done */ |
| close(fds[1]); |
| _exit(0); |
| break; |
| } |
| break; |
| default: |
| close(fds[0]); |
| /* Give away all our physical locks (to the intermediate process) */ |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (dl->state != DATALINK_CLOSED) |
| physical_ChangedPid(dl->physical, pid); |
| write(fds[1], "!", 1); /* done */ |
| close(fds[1]); |
| if (holdsession) { |
| int fd, status; |
| |
| timer_TermService(); |
| signal(SIGPIPE, SIG_DFL); |
| signal(SIGALRM, SIG_DFL); |
| signal(SIGHUP, SIG_DFL); |
| signal(SIGTERM, SIG_DFL); |
| signal(SIGINT, SIG_DFL); |
| signal(SIGQUIT, SIG_DFL); |
| for (fd = getdtablesize(); fd >= 0; fd--) |
| close(fd); |
| /* |
| * Reap the intermediate process. As we're not exiting but the |
| * intermediate is, we don't want it to become defunct. |
| */ |
| waitpid(pid, &status, 0); |
| /* Tweak our process arguments.... */ |
| SetTitle("session owner"); |
| #ifndef NOSUID |
| setuid(ID0realuid()); |
| #endif |
| /* |
| * Hang around for a HUP. This should happen as soon as the |
| * ppp that we passed our ctty descriptor to closes it. |
| * NOTE: If this process dies, the passed descriptor becomes |
| * invalid and will give a select() error by setting one |
| * of the error fds, aborting the other ppp. We don't |
| * want that to happen ! |
| */ |
| pause(); |
| } |
| _exit(0); |
| break; |
| } |
| } |
| |
| unsigned |
| bundle_HighestState(struct bundle *bundle) |
| { |
| struct datalink *dl; |
| unsigned result = DATALINK_CLOSED; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (result < dl->state) |
| result = dl->state; |
| |
| return result; |
| } |
| |
| int |
| bundle_Exception(struct bundle *bundle, int fd) |
| { |
| struct datalink *dl; |
| |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (dl->physical->fd == fd) { |
| datalink_Down(dl, CLOSE_NORMAL); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| void |
| bundle_AdjustFilters(struct bundle *bundle, struct ncpaddr *local, |
| struct ncpaddr *remote) |
| { |
| filter_AdjustAddr(&bundle->filter.in, local, remote, NULL); |
| filter_AdjustAddr(&bundle->filter.out, local, remote, NULL); |
| filter_AdjustAddr(&bundle->filter.dial, local, remote, NULL); |
| filter_AdjustAddr(&bundle->filter.alive, local, remote, NULL); |
| } |
| |
| void |
| bundle_AdjustDNS(struct bundle *bundle) |
| { |
| struct in_addr *dns = bundle->ncp.ipcp.ns.dns; |
| |
| filter_AdjustAddr(&bundle->filter.in, NULL, NULL, dns); |
| filter_AdjustAddr(&bundle->filter.out, NULL, NULL, dns); |
| filter_AdjustAddr(&bundle->filter.dial, NULL, NULL, dns); |
| filter_AdjustAddr(&bundle->filter.alive, NULL, NULL, dns); |
| } |
| |
| void |
| bundle_CalculateBandwidth(struct bundle *bundle) |
| { |
| struct datalink *dl; |
| int sp, overhead, maxoverhead; |
| |
| bundle->bandwidth = 0; |
| bundle->iface->mtu = 0; |
| maxoverhead = 0; |
| |
| for (dl = bundle->links; dl; dl = dl->next) { |
| overhead = ccp_MTUOverhead(&dl->physical->link.ccp); |
| if (maxoverhead < overhead) |
| maxoverhead = overhead; |
| if (dl->state == DATALINK_OPEN) { |
| if ((sp = dl->mp.bandwidth) == 0 && |
| (sp = physical_GetSpeed(dl->physical)) == 0) |
| log_Printf(LogDEBUG, "%s: %s: Cannot determine bandwidth\n", |
| dl->name, dl->physical->name.full); |
| else |
| bundle->bandwidth += sp; |
| if (!bundle->ncp.mp.active) { |
| bundle->iface->mtu = dl->physical->link.lcp.his_mru; |
| break; |
| } |
| } |
| } |
| |
| if (bundle->bandwidth == 0) |
| bundle->bandwidth = 115200; /* Shrug */ |
| |
| if (bundle->ncp.mp.active) { |
| bundle->iface->mtu = bundle->ncp.mp.peer_mrru; |
| overhead = ccp_MTUOverhead(&bundle->ncp.mp.link.ccp); |
| if (maxoverhead < overhead) |
| maxoverhead = overhead; |
| } else if (!bundle->iface->mtu) |
| bundle->iface->mtu = DEF_MRU; |
| |
| #ifndef NORADIUS |
| if (bundle->radius.valid && bundle->radius.mtu && |
| bundle->radius.mtu < bundle->iface->mtu) { |
| log_Printf(LogLCP, "Reducing MTU to radius value %lu\n", |
| bundle->radius.mtu); |
| bundle->iface->mtu = bundle->radius.mtu; |
| } |
| #endif |
| |
| if (maxoverhead) { |
| log_Printf(LogLCP, "Reducing MTU from %lu to %lu (CCP requirement)\n", |
| bundle->iface->mtu, bundle->iface->mtu - maxoverhead); |
| bundle->iface->mtu -= maxoverhead; |
| } |
| |
| tun_configure(bundle); |
| |
| route_UpdateMTU(bundle); |
| } |
| |
| void |
| bundle_AutoAdjust(struct bundle *bundle, int percent, int what) |
| { |
| struct datalink *dl, *choice, *otherlinkup; |
| |
| choice = otherlinkup = NULL; |
| for (dl = bundle->links; dl; dl = dl->next) |
| if (dl->physical->type == PHYS_AUTO) { |
| if (dl->state == DATALINK_OPEN) { |
| if (what == AUTO_DOWN) { |
| if (choice) |
| otherlinkup = choice; |
| choice = dl; |
| } |
| } else if (dl->state == DATALINK_CLOSED) { |
| if (what == AUTO_UP) { |
| choice = dl; |
| break; |
| } |
| } else { |
| /* An auto link in an intermediate state - forget it for the moment */ |
| choice = NULL; |
| break; |
| } |
| } else if (dl->state == DATALINK_OPEN && what == AUTO_DOWN) |
| otherlinkup = dl; |
| |
| if (choice) { |
| if (what == AUTO_UP) { |
| log_Printf(LogPHASE, "%d%% saturation -> Opening link ``%s''\n", |
| percent, choice->name); |
| datalink_Up(choice, 1, 1); |
| mp_CheckAutoloadTimer(&bundle->ncp.mp); |
| } else if (otherlinkup) { /* Only bring the second-last link down */ |
| log_Printf(LogPHASE, "%d%% saturation -> Closing link ``%s''\n", |
| percent, choice->name); |
| datalink_Close(choice, CLOSE_STAYDOWN); |
| mp_CheckAutoloadTimer(&bundle->ncp.mp); |
| } |
| } |
| } |
| |
| int |
| bundle_WantAutoloadTimer(struct bundle *bundle) |
| { |
| struct datalink *dl; |
| int autolink, opened; |
| |
| if (bundle->phase == PHASE_NETWORK) { |
| for (autolink = opened = 0, dl = bundle->links; dl; dl = dl->next) |
| if (dl->physical->type == PHYS_AUTO) { |
| if (++autolink == 2 || (autolink == 1 && opened)) |
| /* Two auto links or one auto and one open in NETWORK phase */ |
| return 1; |
| } else if (dl->state == DATALINK_OPEN) { |
| opened++; |
| if (autolink) |
| /* One auto and one open link in NETWORK phase */ |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void |
| bundle_ChangedPID(struct bundle *bundle) |
| { |
| #ifdef TUNSIFPID |
| ioctl(bundle->dev.fd, TUNSIFPID, 0); |
| #endif |
| } |
| |
| int |
| bundle_Uptime(struct bundle *bundle) |
| { |
| if (bundle->upat) |
| return time(NULL) - bundle->upat; |
| |
| return 0; |
| } |