| /* |
| * Copyright 1999 Internet Business Solutions Ltd., Switzerland |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * $FreeBSD: src/usr.sbin/ppp/radius.c,v 1.54.14.1 2010/12/21 17:10:29 kensmith Exp $ |
| * |
| */ |
| |
| #include <stdint.h> |
| #include <sys/param.h> |
| |
| #include <sys/select.h> |
| #include <sys/socket.h> |
| #include <netinet/in_systm.h> |
| #include <netinet/in.h> |
| #include <netinet/ip.h> |
| #include <arpa/inet.h> |
| #include <sys/un.h> |
| #include <net/route.h> |
| |
| #ifdef LOCALRAD |
| #include "radlib.h" |
| #include "radlib_vs.h" |
| #else |
| #include <radlib.h> |
| #include <radlib_vs.h> |
| #endif |
| |
| #include <errno.h> |
| #ifndef NODES |
| #include <md5.h> |
| #endif |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/time.h> |
| #include <termios.h> |
| #include <unistd.h> |
| #include <netdb.h> |
| |
| #include "layer.h" |
| #include "defs.h" |
| #include "log.h" |
| #include "descriptor.h" |
| #include "prompt.h" |
| #include "timer.h" |
| #include "fsm.h" |
| #include "iplist.h" |
| #include "slcompress.h" |
| #include "throughput.h" |
| #include "lqr.h" |
| #include "hdlc.h" |
| #include "mbuf.h" |
| #include "ncpaddr.h" |
| #include "ip.h" |
| #include "ipcp.h" |
| #include "ipv6cp.h" |
| #include "route.h" |
| #include "command.h" |
| #include "filter.h" |
| #include "lcp.h" |
| #include "ccp.h" |
| #include "link.h" |
| #include "mp.h" |
| #include "radius.h" |
| #include "auth.h" |
| #include "async.h" |
| #include "physical.h" |
| #include "chat.h" |
| #include "cbcp.h" |
| #include "chap.h" |
| #include "datalink.h" |
| #include "ncp.h" |
| #include "bundle.h" |
| #include "proto.h" |
| #include "iface.h" |
| |
| #ifndef NODES |
| struct mschap_response { |
| u_char ident; |
| u_char flags; |
| u_char lm_response[24]; |
| u_char nt_response[24]; |
| }; |
| |
| struct mschap2_response { |
| u_char ident; |
| u_char flags; |
| u_char pchallenge[16]; |
| u_char reserved[8]; |
| u_char response[24]; |
| }; |
| |
| #define AUTH_LEN 16 |
| #define SALT_LEN 2 |
| #endif |
| |
| static const char * |
| radius_policyname(int policy) |
| { |
| switch(policy) { |
| case MPPE_POLICY_ALLOWED: |
| return "Allowed"; |
| case MPPE_POLICY_REQUIRED: |
| return "Required"; |
| } |
| return NumStr(policy, NULL, 0); |
| } |
| |
| static const char * |
| radius_typesname(int types) |
| { |
| switch(types) { |
| case MPPE_TYPE_40BIT: |
| return "40 bit"; |
| case MPPE_TYPE_128BIT: |
| return "128 bit"; |
| case MPPE_TYPE_40BIT|MPPE_TYPE_128BIT: |
| return "40 or 128 bit"; |
| } |
| return NumStr(types, NULL, 0); |
| } |
| |
| #ifndef NODES |
| static void |
| demangle(struct radius *r, const void *mangled, size_t mlen, |
| char **buf, size_t *len) |
| { |
| char R[AUTH_LEN]; /* variable names as per rfc2548 */ |
| const char *S; |
| u_char b[16]; |
| const u_char *A, *C; |
| MD5_CTX Context; |
| int Slen, i, Clen, Ppos; |
| u_char *P; |
| |
| if (mlen % 16 != SALT_LEN) { |
| log_Printf(LogWARN, "Cannot interpret mangled data of length %ld\n", |
| (u_long)mlen); |
| *buf = NULL; |
| *len = 0; |
| return; |
| } |
| |
| /* We need the RADIUS Request-Authenticator */ |
| if (rad_request_authenticator(r->cx.rad, R, sizeof R) != AUTH_LEN) { |
| log_Printf(LogWARN, "Cannot obtain the RADIUS request authenticator\n"); |
| *buf = NULL; |
| *len = 0; |
| return; |
| } |
| |
| A = (const u_char *)mangled; /* Salt comes first */ |
| C = (const u_char *)mangled + SALT_LEN; /* Then the ciphertext */ |
| Clen = mlen - SALT_LEN; |
| S = rad_server_secret(r->cx.rad); /* We need the RADIUS secret */ |
| Slen = strlen(S); |
| P = alloca(Clen); /* We derive our plaintext */ |
| |
| MD5Init(&Context); |
| MD5Update(&Context, S, Slen); |
| MD5Update(&Context, R, AUTH_LEN); |
| MD5Update(&Context, A, SALT_LEN); |
| MD5Final(b, &Context); |
| Ppos = 0; |
| |
| while (Clen) { |
| Clen -= 16; |
| |
| for (i = 0; i < 16; i++) |
| P[Ppos++] = C[i] ^ b[i]; |
| |
| if (Clen) { |
| MD5Init(&Context); |
| MD5Update(&Context, S, Slen); |
| MD5Update(&Context, C, 16); |
| MD5Final(b, &Context); |
| } |
| |
| C += 16; |
| } |
| |
| /* |
| * The resulting plain text consists of a one-byte length, the text and |
| * maybe some padding. |
| */ |
| *len = *P; |
| if (*len > mlen - 1) { |
| log_Printf(LogWARN, "Mangled data seems to be garbage\n"); |
| *buf = NULL; |
| *len = 0; |
| return; |
| } |
| |
| if ((*buf = malloc(*len)) == NULL) { |
| log_Printf(LogWARN, "demangle: Out of memory (%lu bytes)\n", (u_long)*len); |
| *len = 0; |
| } else |
| memcpy(*buf, P + 1, *len); |
| } |
| #endif |
| |
| /* XXX: This should go into librarius. */ |
| #ifndef NOINET6 |
| static uint8_t * |
| rad_cvt_ipv6prefix(const void *data, size_t len) |
| { |
| const size_t ipv6len = sizeof(struct in6_addr) + 2; |
| uint8_t *s; |
| |
| if (len > ipv6len) |
| return NULL; |
| s = malloc(ipv6len); |
| if (s != NULL) { |
| memset(s, 0, ipv6len); |
| memcpy(s, data, len); |
| } |
| return s; |
| } |
| #endif |
| |
| /* |
| * rad_continue_send_request() has given us `got' (non-zero). Deal with it. |
| */ |
| static void |
| radius_Process(struct radius *r, int got) |
| { |
| char *argv[MAXARGS], *nuke; |
| struct bundle *bundle; |
| int argc, addrs, res, width; |
| size_t len; |
| struct ncprange dest; |
| struct ncpaddr gw; |
| const void *data; |
| const char *stype; |
| u_int32_t ipaddr, vendor; |
| struct in_addr ip; |
| #ifndef NOINET6 |
| uint8_t ipv6addr[INET6_ADDRSTRLEN]; |
| struct in6_addr ip6; |
| #endif |
| |
| r->cx.fd = -1; /* Stop select()ing */ |
| stype = r->cx.auth ? "auth" : "acct"; |
| |
| switch (got) { |
| case RAD_ACCESS_ACCEPT: |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "Radius(%s): ACCEPT received\n", stype); |
| if (!r->cx.auth) { |
| rad_close(r->cx.rad); |
| return; |
| } |
| break; |
| |
| case RAD_ACCESS_REJECT: |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "Radius(%s): REJECT received\n", stype); |
| if (!r->cx.auth) { |
| rad_close(r->cx.rad); |
| return; |
| } |
| break; |
| |
| case RAD_ACCESS_CHALLENGE: |
| /* we can't deal with this (for now) ! */ |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "Radius: CHALLENGE received (can't handle yet)\n"); |
| if (r->cx.auth) |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| |
| case RAD_ACCOUNTING_RESPONSE: |
| /* |
| * It's probably not ideal to log this at PHASE level as we'll see |
| * too much stuff going to the log when ``set rad_alive'' is used. |
| * So we differ from older behaviour (ppp version 3.1 and before) |
| * and just log accounting responses to LogRADIUS. |
| */ |
| log_Printf(LogRADIUS, "Radius(%s): Accounting response received\n", |
| stype); |
| if (r->cx.auth) |
| auth_Failure(r->cx.auth); /* unexpected !!! */ |
| |
| /* No further processing for accounting requests, please */ |
| rad_close(r->cx.rad); |
| return; |
| |
| case -1: |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "radius(%s): %s\n", stype, rad_strerror(r->cx.rad)); |
| if (r->cx.auth) |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| |
| default: |
| log_Printf(LogERROR, "rad_send_request(%s): Failed %d: %s\n", stype, |
| got, rad_strerror(r->cx.rad)); |
| if (r->cx.auth) |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| /* Let's see what we've got in our reply */ |
| r->ip.s_addr = r->mask.s_addr = INADDR_NONE; |
| r->mtu = 0; |
| r->vj = 0; |
| while ((res = rad_get_attr(r->cx.rad, &data, &len)) > 0) { |
| switch (res) { |
| case RAD_FRAMED_IP_ADDRESS: |
| r->ip = rad_cvt_addr(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " IP %s\n", inet_ntoa(r->ip)); |
| break; |
| |
| case RAD_FILTER_ID: |
| free(r->filterid); |
| if ((r->filterid = rad_cvt_string(data, len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " Filter \"%s\"\n", r->filterid); |
| break; |
| |
| case RAD_SESSION_TIMEOUT: |
| r->sessiontime = rad_cvt_int(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " Session-Timeout %lu\n", r->sessiontime); |
| break; |
| |
| case RAD_FRAMED_IP_NETMASK: |
| r->mask = rad_cvt_addr(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " Netmask %s\n", inet_ntoa(r->mask)); |
| break; |
| |
| case RAD_FRAMED_MTU: |
| r->mtu = rad_cvt_int(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MTU %lu\n", r->mtu); |
| break; |
| |
| case RAD_FRAMED_ROUTING: |
| /* Disabled for now - should we automatically set up some filters ? */ |
| /* rad_cvt_int(data); */ |
| /* bit 1 = Send routing packets */ |
| /* bit 2 = Receive routing packets */ |
| break; |
| |
| case RAD_FRAMED_COMPRESSION: |
| r->vj = rad_cvt_int(data) == 1 ? 1 : 0; |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " VJ %sabled\n", r->vj ? "en" : "dis"); |
| break; |
| |
| case RAD_FRAMED_ROUTE: |
| /* |
| * We expect a string of the format ``dest[/bits] gw [metrics]'' |
| * Any specified metrics are ignored. MYADDR and HISADDR are |
| * understood for ``dest'' and ``gw'' and ``0.0.0.0'' is the same |
| * as ``HISADDR''. |
| */ |
| |
| if ((nuke = rad_cvt_string(data, len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " Route: %s\n", nuke); |
| bundle = r->cx.auth->physical->dl->bundle; |
| ip.s_addr = INADDR_ANY; |
| ncpaddr_setip4(&gw, ip); |
| ncprange_setip4host(&dest, ip); |
| argc = command_Interpret(nuke, strlen(nuke), argv); |
| if (argc < 0) |
| log_Printf(LogWARN, "radius: %s: Syntax error\n", |
| argc == 1 ? argv[0] : "\"\""); |
| else if (argc < 2) |
| log_Printf(LogWARN, "radius: %s: Invalid route\n", |
| argc == 1 ? argv[0] : "\"\""); |
| else if ((strcasecmp(argv[0], "default") != 0 && |
| !ncprange_aton(&dest, &bundle->ncp, argv[0])) || |
| !ncpaddr_aton(&gw, &bundle->ncp, argv[1])) |
| log_Printf(LogWARN, "radius: %s %s: Invalid route\n", |
| argv[0], argv[1]); |
| else { |
| ncprange_getwidth(&dest, &width); |
| if (width == 32 && strchr(argv[0], '/') == NULL) { |
| /* No mask specified - use the natural mask */ |
| ncprange_getip4addr(&dest, &ip); |
| ncprange_setip4mask(&dest, addr2mask(ip)); |
| } |
| addrs = 0; |
| |
| if (!strncasecmp(argv[0], "HISADDR", 7)) |
| addrs = ROUTE_DSTHISADDR; |
| else if (!strncasecmp(argv[0], "MYADDR", 6)) |
| addrs = ROUTE_DSTMYADDR; |
| |
| if (ncpaddr_getip4addr(&gw, &ipaddr) && ipaddr == INADDR_ANY) { |
| addrs |= ROUTE_GWHISADDR; |
| ncpaddr_setip4(&gw, bundle->ncp.ipcp.peer_ip); |
| } else if (strcasecmp(argv[1], "HISADDR") == 0) |
| addrs |= ROUTE_GWHISADDR; |
| |
| route_Add(&r->routes, addrs, &dest, &gw); |
| } |
| free(nuke); |
| break; |
| |
| case RAD_REPLY_MESSAGE: |
| free(r->repstr); |
| if ((r->repstr = rad_cvt_string(data, len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " Reply-Message \"%s\"\n", r->repstr); |
| break; |
| |
| #ifndef NOINET6 |
| case RAD_FRAMED_IPV6_PREFIX: |
| free(r->ipv6prefix); |
| if ((r->ipv6prefix = rad_cvt_ipv6prefix(data, len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_ipv6prefix: %s\n", |
| "Malformed attribute in response"); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| inet_ntop(AF_INET6, &r->ipv6prefix[2], ipv6addr, sizeof(ipv6addr)); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " IPv6 %s/%d\n", ipv6addr, r->ipv6prefix[1]); |
| break; |
| |
| case RAD_FRAMED_IPV6_ROUTE: |
| /* |
| * We expect a string of the format ``dest[/bits] gw [metrics]'' |
| * Any specified metrics are ignored. MYADDR6 and HISADDR6 are |
| * understood for ``dest'' and ``gw'' and ``::'' is the same |
| * as ``HISADDR6''. |
| */ |
| |
| if ((nuke = rad_cvt_string(data, len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " IPv6 Route: %s\n", nuke); |
| bundle = r->cx.auth->physical->dl->bundle; |
| ncpaddr_setip6(&gw, &in6addr_any); |
| ncprange_set(&dest, &gw, 0); |
| argc = command_Interpret(nuke, strlen(nuke), argv); |
| if (argc < 0) |
| log_Printf(LogWARN, "radius: %s: Syntax error\n", |
| argc == 1 ? argv[0] : "\"\""); |
| else if (argc < 2) |
| log_Printf(LogWARN, "radius: %s: Invalid route\n", |
| argc == 1 ? argv[0] : "\"\""); |
| else if ((strcasecmp(argv[0], "default") != 0 && |
| !ncprange_aton(&dest, &bundle->ncp, argv[0])) || |
| !ncpaddr_aton(&gw, &bundle->ncp, argv[1])) |
| log_Printf(LogWARN, "radius: %s %s: Invalid route\n", |
| argv[0], argv[1]); |
| else { |
| addrs = 0; |
| |
| if (!strncasecmp(argv[0], "HISADDR6", 8)) |
| addrs = ROUTE_DSTHISADDR6; |
| else if (!strncasecmp(argv[0], "MYADDR6", 7)) |
| addrs = ROUTE_DSTMYADDR6; |
| |
| if (ncpaddr_getip6(&gw, &ip6) && IN6_IS_ADDR_UNSPECIFIED(&ip6)) { |
| addrs |= ROUTE_GWHISADDR6; |
| ncpaddr_copy(&gw, &bundle->ncp.ipv6cp.hisaddr); |
| } else if (strcasecmp(argv[1], "HISADDR6") == 0) |
| addrs |= ROUTE_GWHISADDR6; |
| |
| route_Add(&r->ipv6routes, addrs, &dest, &gw); |
| } |
| free(nuke); |
| break; |
| #endif |
| |
| case RAD_VENDOR_SPECIFIC: |
| if ((res = rad_get_vendor_attr(&vendor, &data, &len)) <= 0) { |
| log_Printf(LogERROR, "rad_get_vendor_attr: %s (failing!)\n", |
| rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| switch (vendor) { |
| case RAD_VENDOR_MICROSOFT: |
| switch (res) { |
| #ifndef NODES |
| case RAD_MICROSOFT_MS_CHAP_ERROR: |
| free(r->errstr); |
| if (len == 0) |
| r->errstr = NULL; |
| else { |
| if (len < 3 || ((const char *)data)[1] != '=') { |
| /* |
| * Only point at the String field if we don't think the |
| * peer has misformatted the response. |
| */ |
| data = (const char *)data + 1; |
| len--; |
| } else |
| log_Printf(LogWARN, "Warning: The MS-CHAP-Error " |
| "attribute is mis-formatted. Compensating\n"); |
| if ((r->errstr = rad_cvt_string((const char *)data, |
| len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-CHAP-Error \"%s\"\n", r->errstr); |
| } |
| break; |
| |
| case RAD_MICROSOFT_MS_CHAP2_SUCCESS: |
| free(r->msrepstr); |
| if (len == 0) |
| r->msrepstr = NULL; |
| else { |
| if (len < 3 || ((const char *)data)[1] != '=') { |
| /* |
| * Only point at the String field if we don't think the |
| * peer has misformatted the response. |
| */ |
| data = (const char *)data + 1; |
| len--; |
| } else |
| log_Printf(LogWARN, "Warning: The MS-CHAP2-Success " |
| "attribute is mis-formatted. Compensating\n"); |
| if ((r->msrepstr = rad_cvt_string((const char *)data, |
| len)) == NULL) { |
| log_Printf(LogERROR, "rad_cvt_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| rad_close(r->cx.rad); |
| return; |
| } |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-CHAP2-Success \"%s\"\n", r->msrepstr); |
| } |
| break; |
| |
| case RAD_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY: |
| r->mppe.policy = rad_cvt_int(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-MPPE-Encryption-Policy %s\n", |
| radius_policyname(r->mppe.policy)); |
| break; |
| |
| case RAD_MICROSOFT_MS_MPPE_ENCRYPTION_TYPES: |
| r->mppe.types = rad_cvt_int(data); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-MPPE-Encryption-Types %s\n", |
| radius_typesname(r->mppe.types)); |
| break; |
| |
| case RAD_MICROSOFT_MS_MPPE_RECV_KEY: |
| free(r->mppe.recvkey); |
| demangle(r, data, len, &r->mppe.recvkey, &r->mppe.recvkeylen); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-MPPE-Recv-Key ********\n"); |
| break; |
| |
| case RAD_MICROSOFT_MS_MPPE_SEND_KEY: |
| demangle(r, data, len, &r->mppe.sendkey, &r->mppe.sendkeylen); |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| " MS-MPPE-Send-Key ********\n"); |
| break; |
| #endif |
| |
| default: |
| log_Printf(LogDEBUG, "Dropping MICROSOFT vendor specific " |
| "RADIUS attribute %d\n", res); |
| break; |
| } |
| break; |
| |
| default: |
| log_Printf(LogDEBUG, "Dropping vendor %lu RADIUS attribute %d\n", |
| (unsigned long)vendor, res); |
| break; |
| } |
| break; |
| |
| default: |
| log_Printf(LogDEBUG, "Dropping RADIUS attribute %d\n", res); |
| break; |
| } |
| } |
| |
| if (res == -1) { |
| log_Printf(LogERROR, "rad_get_attr: %s (failing!)\n", |
| rad_strerror(r->cx.rad)); |
| auth_Failure(r->cx.auth); |
| } else if (got == RAD_ACCESS_REJECT) |
| auth_Failure(r->cx.auth); |
| else { |
| r->valid = 1; |
| auth_Success(r->cx.auth); |
| } |
| rad_close(r->cx.rad); |
| } |
| |
| /* |
| * We've either timed out or select()ed on the read descriptor |
| */ |
| static void |
| radius_Continue(struct radius *r, int sel) |
| { |
| struct timeval tv; |
| int got; |
| |
| timer_Stop(&r->cx.timer); |
| if ((got = rad_continue_send_request(r->cx.rad, sel, &r->cx.fd, &tv)) == 0) { |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "Radius: Request re-sent\n"); |
| r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS; |
| timer_Start(&r->cx.timer); |
| return; |
| } |
| |
| radius_Process(r, got); |
| } |
| |
| /* |
| * Time to call rad_continue_send_request() - timed out. |
| */ |
| static void |
| radius_Timeout(void *v) |
| { |
| radius_Continue((struct radius *)v, 0); |
| } |
| |
| /* |
| * Time to call rad_continue_send_request() - something to read. |
| */ |
| static void |
| radius_Read(struct fdescriptor *d, struct bundle *bundle __unused, |
| const fd_set *fdset __unused) |
| { |
| radius_Continue(descriptor2radius(d), 1); |
| } |
| |
| /* |
| * Flush any pending transactions |
| */ |
| void |
| radius_Flush(struct radius *r) |
| { |
| struct timeval tv; |
| fd_set s; |
| |
| while (r->cx.fd != -1) { |
| FD_ZERO(&s); |
| FD_SET(r->cx.fd, &s); |
| tv.tv_sec = 0; |
| tv.tv_usec = TICKUNIT; |
| select(r->cx.fd + 1, &s, NULL, NULL, &tv); |
| radius_Continue(r, 1); |
| } |
| } |
| |
| /* |
| * Behave as a struct fdescriptor (descriptor.h) |
| */ |
| static int |
| radius_UpdateSet(struct fdescriptor *d, fd_set *r, fd_set *w __unused, |
| fd_set *e __unused, int *n) |
| { |
| struct radius *rad = descriptor2radius(d); |
| |
| if (r && rad->cx.fd != -1) { |
| FD_SET(rad->cx.fd, r); |
| if (*n < rad->cx.fd + 1) |
| *n = rad->cx.fd + 1; |
| log_Printf(LogTIMER, "Radius: fdset(r) %d\n", rad->cx.fd); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Behave as a struct fdescriptor (descriptor.h) |
| */ |
| static int |
| radius_IsSet(struct fdescriptor *d, const fd_set *fdset) |
| { |
| struct radius *r = descriptor2radius(d); |
| |
| return r && r->cx.fd != -1 && FD_ISSET(r->cx.fd, fdset); |
| } |
| |
| /* |
| * Behave as a struct fdescriptor (descriptor.h) |
| */ |
| static int |
| radius_Write(struct fdescriptor *d __unused, struct bundle *bundle __unused, |
| const fd_set *fdset __unused) |
| { |
| /* We never want to write here ! */ |
| log_Printf(LogALERT, "radius_Write: Internal error: Bad call !\n"); |
| return 0; |
| } |
| |
| /* |
| * Initialise ourselves |
| */ |
| void |
| radius_Init(struct radius *r) |
| { |
| r->desc.type = RADIUS_DESCRIPTOR; |
| r->desc.UpdateSet = radius_UpdateSet; |
| r->desc.IsSet = radius_IsSet; |
| r->desc.Read = radius_Read; |
| r->desc.Write = radius_Write; |
| r->cx.fd = -1; |
| r->cx.rad = NULL; |
| memset(&r->cx.timer, '\0', sizeof r->cx.timer); |
| r->cx.auth = NULL; |
| r->valid = 0; |
| r->vj = 0; |
| r->ip.s_addr = INADDR_ANY; |
| r->mask.s_addr = INADDR_NONE; |
| r->routes = NULL; |
| r->mtu = DEF_MTU; |
| r->msrepstr = NULL; |
| r->repstr = NULL; |
| #ifndef NOINET6 |
| r->ipv6prefix = NULL; |
| r->ipv6routes = NULL; |
| #endif |
| r->errstr = NULL; |
| r->mppe.policy = 0; |
| r->mppe.types = 0; |
| r->mppe.recvkey = NULL; |
| r->mppe.recvkeylen = 0; |
| r->mppe.sendkey = NULL; |
| r->mppe.sendkeylen = 0; |
| *r->cfg.file = '\0';; |
| log_Printf(LogDEBUG, "Radius: radius_Init\n"); |
| } |
| |
| /* |
| * Forget everything and go back to initialised state. |
| */ |
| void |
| radius_Destroy(struct radius *r) |
| { |
| r->valid = 0; |
| log_Printf(LogDEBUG, "Radius: radius_Destroy\n"); |
| timer_Stop(&r->cx.timer); |
| route_DeleteAll(&r->routes); |
| #ifndef NOINET6 |
| route_DeleteAll(&r->ipv6routes); |
| #endif |
| free(r->filterid); |
| r->filterid = NULL; |
| free(r->msrepstr); |
| r->msrepstr = NULL; |
| free(r->repstr); |
| r->repstr = NULL; |
| #ifndef NOINET6 |
| free(r->ipv6prefix); |
| r->ipv6prefix = NULL; |
| #endif |
| free(r->errstr); |
| r->errstr = NULL; |
| free(r->mppe.recvkey); |
| r->mppe.recvkey = NULL; |
| r->mppe.recvkeylen = 0; |
| free(r->mppe.sendkey); |
| r->mppe.sendkey = NULL; |
| r->mppe.sendkeylen = 0; |
| if (r->cx.fd != -1) { |
| r->cx.fd = -1; |
| rad_close(r->cx.rad); |
| } |
| } |
| |
| static int |
| radius_put_physical_details(struct radius *rad, struct physical *p) |
| { |
| int slot, type; |
| |
| type = RAD_VIRTUAL; |
| if (p->handler) |
| switch (p->handler->type) { |
| case I4B_DEVICE: |
| type = RAD_ISDN_SYNC; |
| break; |
| |
| case TTY_DEVICE: |
| type = RAD_ASYNC; |
| break; |
| |
| case ETHER_DEVICE: |
| type = RAD_ETHERNET; |
| break; |
| |
| case TCP_DEVICE: |
| case UDP_DEVICE: |
| case EXEC_DEVICE: |
| case ATM_DEVICE: |
| case NG_DEVICE: |
| type = RAD_VIRTUAL; |
| break; |
| } |
| |
| if (rad_put_int(rad->cx.rad, RAD_NAS_PORT_TYPE, type) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_int: %s\n", rad_strerror(rad->cx.rad)); |
| rad_close(rad->cx.rad); |
| return 0; |
| } |
| |
| switch (rad->port_id_type) { |
| case RPI_PID: |
| slot = (int)getpid(); |
| break; |
| case RPI_IFNUM: |
| slot = p->dl->bundle->iface->index; |
| break; |
| case RPI_TUNNUM: |
| slot = p->dl->bundle->unit; |
| break; |
| case RPI_DEFAULT: |
| default: |
| slot = physical_Slot(p); |
| break; |
| } |
| |
| if (slot >= 0) |
| if (rad_put_int(rad->cx.rad, RAD_NAS_PORT, slot) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_int: %s\n", rad_strerror(rad->cx.rad)); |
| rad_close(rad->cx.rad); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * Start an authentication request to the RADIUS server. |
| */ |
| int |
| radius_Authenticate(struct radius *r, struct authinfo *authp, const char *name, |
| const char *key, int klen, const char *nchallenge, |
| int nclen) |
| { |
| char hostname[MAXHOSTNAMELEN]; |
| struct timeval tv; |
| const char *what = "questionable"; /* silence warnings! */ |
| char *mac_addr; |
| int got; |
| struct hostent *hp; |
| struct in_addr hostaddr; |
| #ifndef NODES |
| struct mschap_response msresp; |
| struct mschap2_response msresp2; |
| const struct MSCHAPv2_resp *keyv2; |
| #endif |
| |
| if (!*r->cfg.file) |
| return 0; |
| |
| if (r->cx.fd != -1) |
| /* |
| * We assume that our name/key/challenge is the same as last time, |
| * and just continue to wait for the RADIUS server(s). |
| */ |
| return 1; |
| |
| radius_Destroy(r); |
| |
| if ((r->cx.rad = rad_auth_open()) == NULL) { |
| log_Printf(LogERROR, "rad_auth_open: %s\n", strerror(errno)); |
| return 0; |
| } |
| |
| if (rad_config(r->cx.rad, r->cfg.file) != 0) { |
| log_Printf(LogERROR, "rad_config: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| if (rad_create_request(r->cx.rad, RAD_ACCESS_REQUEST) != 0) { |
| log_Printf(LogERROR, "rad_create_request: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| if (rad_put_string(r->cx.rad, RAD_USER_NAME, name) != 0 || |
| rad_put_int(r->cx.rad, RAD_SERVICE_TYPE, RAD_FRAMED) != 0 || |
| rad_put_int(r->cx.rad, RAD_FRAMED_PROTOCOL, RAD_PPP) != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| switch (authp->physical->link.lcp.want_auth) { |
| case PROTO_PAP: |
| /* We're talking PAP */ |
| if (rad_put_attr(r->cx.rad, RAD_USER_PASSWORD, key, klen) != 0) { |
| log_Printf(LogERROR, "PAP: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| what = "PAP"; |
| break; |
| |
| case PROTO_CHAP: |
| switch (authp->physical->link.lcp.want_authtype) { |
| case 0x5: |
| if (rad_put_attr(r->cx.rad, RAD_CHAP_PASSWORD, key, klen) != 0 || |
| rad_put_attr(r->cx.rad, RAD_CHAP_CHALLENGE, nchallenge, nclen) != 0) { |
| log_Printf(LogERROR, "CHAP: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| what = "CHAP"; |
| break; |
| |
| #ifndef NODES |
| case 0x80: |
| if (klen != 50) { |
| log_Printf(LogERROR, "CHAP80: Unrecognised key length %d\n", klen); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT, |
| RAD_MICROSOFT_MS_CHAP_CHALLENGE, nchallenge, nclen); |
| msresp.ident = *key; |
| msresp.flags = 0x01; |
| memcpy(msresp.lm_response, key + 1, 24); |
| memcpy(msresp.nt_response, key + 25, 24); |
| rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT, |
| RAD_MICROSOFT_MS_CHAP_RESPONSE, &msresp, |
| sizeof msresp); |
| what = "MSCHAP"; |
| break; |
| |
| case 0x81: |
| if (klen != sizeof(*keyv2) + 1) { |
| log_Printf(LogERROR, "CHAP81: Unrecognised key length %d\n", klen); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| keyv2 = (const struct MSCHAPv2_resp *)(key + 1); |
| rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT, |
| RAD_MICROSOFT_MS_CHAP_CHALLENGE, nchallenge, nclen); |
| msresp2.ident = *key; |
| msresp2.flags = keyv2->Flags; |
| memcpy(msresp2.response, keyv2->NTResponse, sizeof msresp2.response); |
| memset(msresp2.reserved, '\0', sizeof msresp2.reserved); |
| memcpy(msresp2.pchallenge, keyv2->PeerChallenge, |
| sizeof msresp2.pchallenge); |
| rad_put_vendor_attr(r->cx.rad, RAD_VENDOR_MICROSOFT, |
| RAD_MICROSOFT_MS_CHAP2_RESPONSE, &msresp2, |
| sizeof msresp2); |
| what = "MSCHAPv2"; |
| break; |
| #endif |
| default: |
| log_Printf(LogERROR, "CHAP: Unrecognised type 0x%02x\n", |
| authp->physical->link.lcp.want_authtype); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| } |
| |
| if (gethostname(hostname, sizeof hostname) != 0) |
| log_Printf(LogERROR, "rad_put: gethostname(): %s\n", strerror(errno)); |
| else { |
| if (Enabled(authp->physical->dl->bundle, OPT_NAS_IP_ADDRESS) && |
| (hp = gethostbyname(hostname)) != NULL) { |
| hostaddr.s_addr = *(u_long *)hp->h_addr; |
| if (rad_put_addr(r->cx.rad, RAD_NAS_IP_ADDRESS, hostaddr) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| } |
| if (Enabled(authp->physical->dl->bundle, OPT_NAS_IDENTIFIER) && |
| rad_put_string(r->cx.rad, RAD_NAS_IDENTIFIER, hostname) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| } |
| |
| if ((mac_addr = getenv("HISMACADDR")) != NULL && |
| rad_put_string(r->cx.rad, RAD_CALLING_STATION_ID, mac_addr) != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return 0; |
| } |
| |
| radius_put_physical_details(r, authp->physical); |
| |
| log_Printf(LogRADIUS, "Radius(auth): %s data sent for %s\n", what, name); |
| |
| r->cx.auth = authp; |
| if ((got = rad_init_send_request(r->cx.rad, &r->cx.fd, &tv))) |
| radius_Process(r, got); |
| else { |
| log_Printf(log_IsKept(LogRADIUS) ? LogRADIUS : LogPHASE, |
| "Radius: Request sent\n"); |
| log_Printf(LogDEBUG, "Using radius_Timeout [%p]\n", radius_Timeout); |
| r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS; |
| r->cx.timer.func = radius_Timeout; |
| r->cx.timer.name = "radius auth"; |
| r->cx.timer.arg = r; |
| timer_Start(&r->cx.timer); |
| } |
| |
| return 1; |
| } |
| |
| /* Fetch IP, netmask from IPCP */ |
| void |
| radius_Account_Set_Ip(struct radacct *ac, struct in_addr *peer_ip, |
| struct in_addr *netmask) |
| { |
| ac->proto = PROTO_IPCP; |
| memcpy(&ac->peer.ip.addr, peer_ip, sizeof(ac->peer.ip.addr)); |
| memcpy(&ac->peer.ip.mask, netmask, sizeof(ac->peer.ip.mask)); |
| } |
| |
| #ifndef NOINET6 |
| /* Fetch interface-id from IPV6CP */ |
| void |
| radius_Account_Set_Ipv6(struct radacct *ac, u_char *ifid) |
| { |
| ac->proto = PROTO_IPV6CP; |
| memcpy(&ac->peer.ipv6.ifid, ifid, sizeof(ac->peer.ipv6.ifid)); |
| } |
| #endif |
| |
| /* |
| * Send an accounting request to the RADIUS server |
| */ |
| void |
| radius_Account(struct radius *r, struct radacct *ac, struct datalink *dl, |
| int acct_type, struct pppThroughput *stats) |
| { |
| struct timeval tv; |
| int got; |
| char hostname[MAXHOSTNAMELEN]; |
| char *mac_addr; |
| struct hostent *hp; |
| struct in_addr hostaddr; |
| |
| if (!*r->cfg.file) |
| return; |
| |
| if (r->cx.fd != -1) |
| /* |
| * We assume that our name/key/challenge is the same as last time, |
| * and just continue to wait for the RADIUS server(s). |
| */ |
| return; |
| |
| timer_Stop(&r->cx.timer); |
| |
| if ((r->cx.rad = rad_acct_open()) == NULL) { |
| log_Printf(LogERROR, "rad_auth_open: %s\n", strerror(errno)); |
| return; |
| } |
| |
| if (rad_config(r->cx.rad, r->cfg.file) != 0) { |
| log_Printf(LogERROR, "rad_config: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| if (rad_create_request(r->cx.rad, RAD_ACCOUNTING_REQUEST) != 0) { |
| log_Printf(LogERROR, "rad_create_request: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| /* Grab some accounting data and initialize structure */ |
| if (acct_type == RAD_START) { |
| ac->rad_parent = r; |
| /* Fetch username from datalink */ |
| strncpy(ac->user_name, dl->peer.authname, sizeof ac->user_name); |
| ac->user_name[AUTHLEN-1] = '\0'; |
| |
| ac->authentic = 2; /* Assume RADIUS verified auth data */ |
| |
| /* Generate a session ID */ |
| snprintf(ac->session_id, sizeof ac->session_id, "%s%ld-%s%lu", |
| dl->bundle->cfg.auth.name, (long)getpid(), |
| dl->peer.authname, (unsigned long)stats->uptime); |
| |
| /* And grab our MP socket name */ |
| snprintf(ac->multi_session_id, sizeof ac->multi_session_id, "%s", |
| dl->bundle->ncp.mp.active ? |
| dl->bundle->ncp.mp.server.socket.sun_path : ""); |
| }; |
| |
| if (rad_put_string(r->cx.rad, RAD_USER_NAME, ac->user_name) != 0 || |
| rad_put_int(r->cx.rad, RAD_SERVICE_TYPE, RAD_FRAMED) != 0 || |
| rad_put_int(r->cx.rad, RAD_FRAMED_PROTOCOL, RAD_PPP) != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| switch (ac->proto) { |
| case PROTO_IPCP: |
| if (rad_put_addr(r->cx.rad, RAD_FRAMED_IP_ADDRESS, |
| ac->peer.ip.addr) != 0 || |
| rad_put_addr(r->cx.rad, RAD_FRAMED_IP_NETMASK, |
| ac->peer.ip.mask) != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| break; |
| #ifndef NOINET6 |
| case PROTO_IPV6CP: |
| if (rad_put_attr(r->cx.rad, RAD_FRAMED_INTERFACE_ID, ac->peer.ipv6.ifid, |
| sizeof(ac->peer.ipv6.ifid)) != 0) { |
| log_Printf(LogERROR, "rad_put_attr: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| if (r->ipv6prefix) { |
| /* |
| * Since PPP doesn't delegate an IPv6 prefix to a peer, |
| * Framed-IPv6-Prefix may be not used, actually. |
| */ |
| if (rad_put_attr(r->cx.rad, RAD_FRAMED_IPV6_PREFIX, r->ipv6prefix, |
| sizeof(struct in6_addr) + 2) != 0) { |
| log_Printf(LogERROR, "rad_put_attr: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| } |
| break; |
| #endif |
| default: |
| /* We don't log any protocol specific information */ |
| break; |
| } |
| |
| if ((mac_addr = getenv("HISMACADDR")) != NULL && |
| rad_put_string(r->cx.rad, RAD_CALLING_STATION_ID, mac_addr) != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| if (gethostname(hostname, sizeof hostname) != 0) |
| log_Printf(LogERROR, "rad_put: gethostname(): %s\n", strerror(errno)); |
| else { |
| if (Enabled(dl->bundle, OPT_NAS_IP_ADDRESS) && |
| (hp = gethostbyname(hostname)) != NULL) { |
| hostaddr.s_addr = *(u_long *)hp->h_addr; |
| if (rad_put_addr(r->cx.rad, RAD_NAS_IP_ADDRESS, hostaddr) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| } |
| if (Enabled(dl->bundle, OPT_NAS_IDENTIFIER) && |
| rad_put_string(r->cx.rad, RAD_NAS_IDENTIFIER, hostname) != 0) { |
| log_Printf(LogERROR, "rad_put: rad_put_string: %s\n", |
| rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| } |
| |
| radius_put_physical_details(r, dl->physical); |
| |
| if (rad_put_int(r->cx.rad, RAD_ACCT_STATUS_TYPE, acct_type) != 0 || |
| rad_put_string(r->cx.rad, RAD_ACCT_SESSION_ID, ac->session_id) != 0 || |
| rad_put_string(r->cx.rad, RAD_ACCT_MULTI_SESSION_ID, |
| ac->multi_session_id) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_DELAY_TIME, 0) != 0) { |
| /* XXX ACCT_DELAY_TIME should be increased each time a packet is waiting */ |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| if (acct_type == RAD_STOP || acct_type == RAD_ALIVE) |
| /* Show some statistics */ |
| if (rad_put_int(r->cx.rad, RAD_ACCT_INPUT_OCTETS, stats->OctetsIn % UINT32_MAX) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_INPUT_GIGAWORDS, stats->OctetsIn / UINT32_MAX) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_INPUT_PACKETS, stats->PacketsIn) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_OUTPUT_OCTETS, stats->OctetsOut % UINT32_MAX) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_OUTPUT_GIGAWORDS, stats->OctetsOut / UINT32_MAX) != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_OUTPUT_PACKETS, stats->PacketsOut) |
| != 0 || |
| rad_put_int(r->cx.rad, RAD_ACCT_SESSION_TIME, throughput_uptime(stats)) |
| != 0) { |
| log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad)); |
| rad_close(r->cx.rad); |
| return; |
| } |
| |
| if (log_IsKept(LogPHASE) || log_IsKept(LogRADIUS)) { |
| const char *what; |
| int level; |
| |
| switch (acct_type) { |
| case RAD_START: |
| what = "START"; |
| level = log_IsKept(LogPHASE) ? LogPHASE : LogRADIUS; |
| break; |
| case RAD_STOP: |
| what = "STOP"; |
| level = log_IsKept(LogPHASE) ? LogPHASE : LogRADIUS; |
| break; |
| case RAD_ALIVE: |
| what = "ALIVE"; |
| level = LogRADIUS; |
| break; |
| default: |
| what = "<unknown>"; |
| level = log_IsKept(LogPHASE) ? LogPHASE : LogRADIUS; |
| break; |
| } |
| log_Printf(level, "Radius(acct): %s data sent\n", what); |
| } |
| |
| r->cx.auth = NULL; /* Not valid for accounting requests */ |
| if ((got = rad_init_send_request(r->cx.rad, &r->cx.fd, &tv))) |
| radius_Process(r, got); |
| else { |
| log_Printf(LogDEBUG, "Using radius_Timeout [%p]\n", radius_Timeout); |
| r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS; |
| r->cx.timer.func = radius_Timeout; |
| r->cx.timer.name = "radius acct"; |
| r->cx.timer.arg = r; |
| timer_Start(&r->cx.timer); |
| } |
| } |
| |
| /* |
| * How do things look at the moment ? |
| */ |
| void |
| radius_Show(struct radius *r, struct prompt *p) |
| { |
| prompt_Printf(p, " Radius config: %s", |
| *r->cfg.file ? r->cfg.file : "none"); |
| if (r->valid) { |
| prompt_Printf(p, "\n IP: %s\n", inet_ntoa(r->ip)); |
| prompt_Printf(p, " Netmask: %s\n", inet_ntoa(r->mask)); |
| prompt_Printf(p, " MTU: %lu\n", r->mtu); |
| prompt_Printf(p, " VJ: %sabled\n", r->vj ? "en" : "dis"); |
| prompt_Printf(p, " Message: %s\n", r->repstr ? r->repstr : ""); |
| prompt_Printf(p, " MPPE Enc Policy: %s\n", |
| radius_policyname(r->mppe.policy)); |
| prompt_Printf(p, " MPPE Enc Types: %s\n", |
| radius_typesname(r->mppe.types)); |
| prompt_Printf(p, " MPPE Recv Key: %seceived\n", |
| r->mppe.recvkey ? "R" : "Not r"); |
| prompt_Printf(p, " MPPE Send Key: %seceived\n", |
| r->mppe.sendkey ? "R" : "Not r"); |
| prompt_Printf(p, " MS-CHAP2-Response: %s\n", |
| r->msrepstr ? r->msrepstr : ""); |
| prompt_Printf(p, " Error Message: %s\n", r->errstr ? r->errstr : ""); |
| if (r->routes) |
| route_ShowSticky(p, r->routes, " Routes", 16); |
| #ifndef NOINET6 |
| if (r->ipv6routes) |
| route_ShowSticky(p, r->ipv6routes, " IPv6 Routes", 16); |
| #endif |
| } else |
| prompt_Printf(p, " (not authenticated)\n"); |
| } |
| |
| static void |
| radius_alive(void *v) |
| { |
| struct bundle *bundle = (struct bundle *)v; |
| |
| timer_Stop(&bundle->radius.alive.timer); |
| bundle->radius.alive.timer.load = bundle->radius.alive.interval * SECTICKS; |
| if (bundle->radius.alive.timer.load) { |
| radius_Account(&bundle->radius, &bundle->radacct, |
| bundle->links, RAD_ALIVE, &bundle->ncp.ipcp.throughput); |
| timer_Start(&bundle->radius.alive.timer); |
| } |
| } |
| |
| void |
| radius_StartTimer(struct bundle *bundle) |
| { |
| if (bundle->radius.cfg.file && bundle->radius.alive.interval) { |
| bundle->radius.alive.timer.func = radius_alive; |
| bundle->radius.alive.timer.name = "radius alive"; |
| bundle->radius.alive.timer.load = bundle->radius.alive.interval * SECTICKS; |
| bundle->radius.alive.timer.arg = bundle; |
| radius_alive(bundle); |
| } |
| } |
| |
| void |
| radius_StopTimer(struct radius *r) |
| { |
| timer_Stop(&r->alive.timer); |
| } |