testcases/commands/ade/ar/ar01 - platform/external/ltp - Git at Google

 #!/bin/sh
 #
 #   Copyright (c) International Business Machines  Corp., 2000
 #
 #   This program is free software;  you can redistribute it and/or modify
 #   it under the terms of the GNU General Public License as published by
 #   the Free Software Foundation; either version 2 of the License, or
 #   (at your option) any later version.
 #
 #   This program is distributed in the hope that it will be useful,
 #   but WITHOUT ANY WARRANTY;  without even the implied warranty of
 #   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
 #   the GNU General Public License for more details.
 #
 #   You should have received a copy of the GNU General Public License
 #   along with this program;  if not, write to the Free Software
 #   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 #
 #
 #
 #  FILE   : ar
 #
 #  PURPOSE: Construct one or more command lines which use options that do not
 #           take arguments
 #           For each of these invocations
 #           Specify the options seperately
 #
 #          Group the options together
 #          Compare the behavior of the two cases
 #          If they behave differently, then fail
 #          If none of the cases fail, then pass
 #
 #  HISTORY:
 #    06/01 Robbie Williamson ([email protected])
 #      -Ported
 #
 #
 #-----------------------------------------------------------------------
 #
 #----------------------------------------------------------------------
 #Uncomment line below for debug output.
 #trace_logic=${trace_logic:-"set -x"}
 $trace_logic

 TCtmp=${TCtmp:-/tmp/ar01-$$}
 mkdir $TCtmp
 TCdat=${TCdat:-`pwd`}
 cd $TCdat

 LOOPS=${LOOPS:-1}
 LIST="file1.in file2.in file3.in file4.in file5.in file6.in file7.in file8.in file9.in file10.in"
 LIST="$LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST"
 COUNT=1
 TCRESULT=0

 # Setup function
 setup() {
 	for i in $LIST;do
 		touch $i
 	done
 }

 # Cleanup function
 cleanup() {
 	if [ $TCRESULT = 0 ]; then
 		echo "---------------ar command passed the system test-----------------"
 		exit 0
 	else
 		echo "---------------ar command failed the system test-----------------"
 		exit 1
 	fi
 }

 crtest() {
 	if [ $? -ne 0 ]
 	then
 		TCRESULT=1
 		echo "FAIL - could not create lib.a"
 		cleanup
 	fi
 }

 ttest() {
 	if [ $? -ne 0 ]
 	then
 		TCRESULT=1
 		echo "FAIL - could not output table from lib.a to lib.a.stdout"
 		cleanup
 	fi
 }

 rtest() {
 	if [ $? -ne 0 ]
 	then
 		TCRESULT=1
 		echo "FAIL - could not add file into lib.a"
 		cleanup
 	fi
 }

 mtest() {
 	if [ $? -ne 0 ]
 	then
 		TCRESULT=1
 		echo "FAIL - could not move file into lib.a"
 		cleanup
 	fi
 }

 setup

 # Main Loop
 while [ $COUNT -le $LOOPS ]
 do
 	echo "-------System test for ar command, Loop $COUNT----"
 	#The 'a' flag causes files to be placed after 'posname'.

 	#  CODE
 	rm -rf $TCtmp/lib.a;cd $TCdat

 	printf "file1.in\nfile2.in\nfile3.in\n" >$TCtmp/lib.a.exp

 	ar -cr $TCtmp/lib.a file1.in file3.in
 	crtest
 	ar -ra file1.in $TCtmp/lib.a file2.in
 	rtest
 	ar -t $TCtmp/lib.a > $TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)1"
 	else
 		TCRESULT=1
 		echo "FAIL - ar with -a option does not place files after 'posname'"
 	fi

 	# The 'a' flag with the 'm' option causes files to be moved after 'posname'

 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in file4.in
 	crtest
 	printf "file1.in\nfile4.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -ma file1.in $TCtmp/lib.a file4.in
 	mtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout 1> /dev/null 2> /dev/null
 	then
 		echo "-)2"
 	else
 		TCRESULT=2
 		echo "FAIL - ar with -a option does not move files after 'posname'"
 	fi

 	# The 'b' flag causes files to be placed before 'posname'.

 	# CODE

 	rm -rf $TCtmp/lib.a
 	cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file3.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -rb file3.in $TCtmp/lib.a file2.in
 	rtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)3"
 	else
 		TCRESULT=3
 		echo "FAIL - ar with -b option does not place files before 'posname'"
 	fi

 	# The 'b' flag with 'm' option causes files to be moved before 'posname'.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -mb file3.in $TCtmp/lib.a file2.in
 	mtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)4"
 	else
 		TCRESULT=4
 		echo "FAIL - ar with -b option does not move files before 'posname'."
 	fi

 	# -c option suppress the messages

 	# CODE

 	rm -rf $TCtmp/lib.a.exp $TCtmp/lib.a
 	cd $TCdat

 	touch $TCtmp/lib.a.exp

 	ar -cr $TCtmp/lib.a file1.in > $TCtmp/lib.a.stdout
 	crtest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout
 	then
 		echo "-)5"
 	else
 		TCRESULT=5
 		echo "FAIL - ar with -c option did not suppress messages."
 	fi

 	# The 'qc' option causes suppresion of the default message when
 	# 'afile' is created.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -qc $TCtmp/lib.a file1.in > $TCtmp/lib.a.stdout

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo  "-)6"
 	else
 		TCRESULT=6
 		echo "FAIL - ar with -qc option did not suppress messages."
 	fi

 	# The -d option deletes files from archive when names are specified.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	echo "file3.in" > $TCtmp/lib.a.exp
 	ar -d $TCtmp/lib.a file1.in file2.in
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo  "-)7"
 	else
 		TCRESULT=7
 		echo "FAIL - ar with -d option does not delete files form the archive"
 	fi

 	# The -d option does not delete files from archive when no names
 	# are specified.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	ar -d $TCtmp/lib.a >/dev/null 2>&1
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo  "-)8"
 	else
 		TCRESULT=8
 		echo "FAIL - ar with -d option deleted files even when none were specified"
 	fi

 	# The -d does not affect behaviour of -s option.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	touch $TCtmp/dummy.in
 	ar -cr $TCtmp/lib.a $TCtmp/dummy.in file1.in file2.in file3.in
 	crtest
 	size1=`ls -s $TCtmp/lib.a|(read a b; echo $a)`
 	ar -ds $TCtmp/lib.a $TCtmp/dummy.in 2>&1 1>/dev/null
 	size2=`ls -s $TCtmp/lib.a|(read a b; echo $a)`

 	if [ $size1 -eq $size2 ]
 	then
 		echo  "-)9"
 	else
 		TCRESULT=9
 		echo "FAIL - ar with -d option did affect the -s option"
 	fi

 	# The 'i' flag causes files to be placed before 'posname'.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -cr $TCtmp/lib.a file1.in file3.in
 	crtest
 	ar -ri file3.in $TCtmp/lib.a file2.in
 	rtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo  "-)10"
 	else
 		TCRESULT=10
 		echo "FAIL - ar with -i did not place the files before 'posname'."
 	fi

 	# The 'i' flag with 'm' option causes files to be moved before 'posname'.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -mi file3.in $TCtmp/lib.a file2.in
 	mtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)11"
 	else
 		TCRESULT=11
 		echo "FAIL - ar with -i failed to move files before 'posname'."
 	fi

 	# m option moves the files to end of the archive

 	# CODE

 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -m $TCtmp/lib.a file3.in
 	mtest
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)12"
 	else
 		TCRESULT=12
 		echo "FAIL - ar with -m fails to move the files to the end of archive"
 	fi

 	# The -p option causes only printing of contents of file contained in
 	# archive.

 	# CODE
 	rm -rf $TCtmp/lib.*
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	printf "This is file one\nThis is file two\nThis is file three\n" > $TCtmp/lib.a.exp
 	ar -p $TCtmp/lib.a 2>&1 1>$TCtmp/lib.a.stdout

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)13"
 	else
 		TCRESULT=13
 		echo "FAIL - ar with -p option failed to print the contents."
 	fi

 	# The -p does not affect behaviour of -s option.

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	size1=`ls -s $TCtmp/lib.a|(read a b; echo $a)`
 	ar -ps $TCtmp/lib.a 2>&1 1> /dev/null
 	size2=`ls -s $TCtmp/lib.a|(read a b; echo $a)`

 	if [ $size1 -eq $size2 ]
 	then
 		echo "-)14"
 	else
 		TCRESULT=14
 		echo "FAIL - ar with -p did the affect behaviour of -s option"
 	fi

 	# The command 'ar -q afile name' appends name to the end of 'afile'.

 	# CODE

 	rm -rf $TCtmp/lib.a
 	cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\nfile4.in\n" > $TCtmp/lib.a.exp
 	ar -q $TCtmp/lib.a file4.in
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)15"
 	else
 		TCRESULT=15
 		echo "FAIL - ar with -q afilename failed to append to the end of file"
 	fi

 	# q option does not affect the behaviour of option s

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	size1=`ls -s $TCtmp/lib.a|(read a b; echo $a)`
 	ar -qs $TCtmp/lib.a $TCtmp/dummy.in 2>&1 1>/dev/null
 	size2=`ls -s $TCtmp/lib.a|(read a b; echo $a)`

 	if [ $size1 -eq $size2 ]
 	then
 		echo "-)16"
 	else
 		TCRESULT=16
 		echo "FAIL - ar with -q did affect the behaviour of -s option."
 	fi

 	# The -s causes regeneration of symbol table even if a symbol table exists.

 	echo "-)17 SKIPPED due to binutils ar automatically adds a symbol."

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
 	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout 2>&1
 	ttest

 	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
 	then
 		echo "-)18"
 	else
 		TCRESULT=18
 		echo "FAIL - ar with -t did not print as desired"
 	fi

 	# The -t does not affect behaviour of -s option.

 	echo "-)19 SKIPPED due to binutils ar automatically adds a symbol."

 	# The 'u' flag causes files only with later modification date than
 	# in archive are replaced.

 	# CODE
 	rm -rf $TCtmp/lib.a
 	cd $TCdat

 	ar -cr $TCtmp/lib.a file0.in file2.in
 	crtest
 	File1time=`ar -tv $TCtmp/lib.a | grep file0.in`
 	File2time=`ar -tv $TCtmp/lib.a | grep file2.in`

 	#sleep 5
 	touch -c -t 201503030303.55 file0.in

 	ar -ru $TCtmp/lib.a file0.in file2.in 2>&1 1>/dev/null
 	File1time1=`ar -tv $TCtmp/lib.a | grep file0.in`
 	File2time2=`ar -tv $TCtmp/lib.a | grep file2.in`

 	if [ "$File2time" = "$File2time2" ]
 	then
 		if [ "$File1time" = "$File1time1" ]
 		then
 			TCRESULT=20
 			echo "FAIL - ar with -u flag failed"
 		else
 			echo "-)20"
 		fi
 	else
 		TCRESULT=20
 		echo "FAIL - ar with -u flag failed"
 	fi
 	# Reset the timestamp on file0.in to current
 	touch file0.in

 	# This is the next assertion

 	# CODE

 	Count=0
 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	Sysmonth=`date | cut -f2 -d" "`
 	Month=`ar -tv $TCtmp/lib.a | grep "file2.in" | awk '{print $4}'`
 	Count=`ar -tv $TCtmp/lib.a | wc -l`

 	if [ $Sysmonth = $Month ] && [ $Count -eq 3 ]
 	then
 		echo "-)21"
 	else
 	    	TCRESULT=21
 		echo "FAIL - ar with -v flag failed to print a line for each file"
 	fi

 	# The -v option produces a verbose listing like ls -n

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat $TCtmp/lib.a.exp *out
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest

 	ls -ln --time-style=+%b" "%e" "%H:%M file1.in file2.in file3.in |
 	while read permissions link uid gid size month day time file_name
 	do
 		echo "$permissions;$uid/$gid;$size;$month;$day;$time;$file_name"
 	done >>  $TCtmp/lib.a.exp

 	ar -tv $TCtmp/lib.a |
 	while read permissions uid size month day time year file_name
 	do
 		echo "-$permissions;$uid;$size;$month;$day;$time;$file_name"
 	done >> $TCtmp/lib.a.stdout
 	ttest

 	diff $TCtmp/lib.a.exp $TCtmp/lib.a.stdout
 	if [ $? -eq 0 ]
 	then
 		echo "-)22"
 	else
 		TCRESULT=22
 		echo "FAIL - ar with -v failed to produce a verbose out put"
 	fi

 	# The 'v' option causes the 'x' option to display a filename for each
 	# file extracted.

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	Count=`ar -xv $TCtmp/lib.a | wc -l`

 	if [ $Count = '3' ]
 	then
 		echo "-)23"
 	else
 		TCRESULT=23
 		echo "FAIL - ar with -v along with x did not display extracted file names"
 	fi

 	# The command 'ar -x afile ' causes all files from the archive to be extracted.

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest

 	Count=`ar -xv $TCtmp/lib.a | wc -l`

 	if [ $Count -eq '3' ]
 	then
 		echo "-)24"
 	else
 		TCRESULT=24
 		echo "FAIL - ar with -x flag did not extract all file"
 	fi

 	# The command 'ar -x afile name name' causes only named files from
 	# the archive to be extracted.

 	# CODE
 	rm -rf $TCtmp/lib.a;cd $TCdat
 	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
 	crtest
 	Count=`ar -xv $TCtmp/lib.a file1.in | grep file | wc -l`

 	if [ $Count = '1' ]
 	then
 		echo "-)25"
 	else
 		TCRESULT=25
 		echo "FAIL - ar with -x lib filename did not extract the named file alone"
 	fi

 	# This test will fail under pan, so it's commented out by default.
 	echo "-)26 SKIPPED UNDER PAN"
 	#
 	# Signal SIGHUP

 	# CODE

 	rm -rf $TCtmp/lib.*

 	ar -vr $TCtmp/lib.a $LIST >>$TCtmp/lib.a.stdout&
 	while [ ! -s $TCtmp/lib.a ]
 	do
 		sleep 1
 	done
 	kill -s 2 $! >/dev/null 2>&1

 	sleep 1
 	if [ `wc -l $TCtmp/lib.a.stdout|(read a b;echo $a)` -ne 100 ]
 	then
 		TCRESULT=27
 		echo "FAIL - ar could not create the archive ; killed by SIGINIT"
 	else
 		echo "-)27"
 	fi

 	# Signal SIGQUIT

 	# CODE

 	rm -rf $TCtmp/lib.*

 	ar -vr $TCtmp/lib.a $LIST >>$TCtmp/lib.a.stdout&
 	while [ ! -s $TCtmp/lib.a ]
 	do
 		sleep 1
 	done
 	kill -s 3 $! >/dev/null 2>&1

 	sleep 1
 	if [ `wc -l $TCtmp/lib.a.stdout|(read a b;echo $a)` -ne 100 ]
 	then
 		TCRESULT=28
 		echo "FAIL - ar could not create the archive ; killed by SIGQUIT"
 	else
 		echo "-)28"
 	fi

 	# Signal SIGHUP; ar should not remove archive that existed before invocation.

 	# CODE

 	rm -rf $TCtmp/lib.a;cd $TCdat $TCtmp/lib.a.stdout
 	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
 	rtest
 	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
 	rtest
 	while [ ! -s $TCtmp/lib.a ]
 	do
 		sleep 1
 	done
 	sleep 1
 	kill -s 1 $! 2>&1 1>/dev/null | read a

 	if [ `wc -l $TCtmp/lib.a.stdout|(read a b;echo $a)` -ne 103 ]
 	then
 		TCRESULT=29
 		echo "FAIL - ar could not complete the archive ; killed by SIGHUP"
 	else
 		echo "-)29"
 	fi

 	# Signal SIGINIT; ar should not remove archive that existed before invocation.

 	# CODE

 	rm -rf $TCtmp/lib.a
 	cd $TCdat $TCtmp/lib.a.stdout
 	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
 	rtest
 	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
 	rtest
 	while [ ! -s $TCtmp/lib.a ]
 	do
 		sleep 1
 	done
 	sleep 1

 	kill -s 2 $! 2>&1 1>/dev/null | read a

 	if [ `wc -l $TCtmp/lib.a.stdout|(read a b;echo $a)` -ne 103 ]
 	then
 		TCRESULT=30
 		echo "FAIL - ar could not complete the archive ; killed by SIGINIT"
 	else
 		echo "-)30"
 	fi

 	# Signal SIGQUIT; ar should not remove archive that existed before invocation.

 	# CODE

 	rm -rf $TCtmp/lib.a
 	cd $TCdat
 	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
 	rtest
 	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
 	rtest
 	while [ ! -s $TCtmp/lib.a ]
 	do
 		sleep 1
 	done
 	sleep 1
 	kill -s 3 $! 2>&1 1>/dev/null | read a

 	if [ `wc -l $TCtmp/lib.a.stdout|(read a b;echo $a)` -ne 103 ]
 	then
 		TCRESULT=31
 		echo "FAIL - ar could not complete the archive ; killed by SIGQUIT"
 	else
 		echo "-)31"
 	fi

 	rm -rf $TCtmp
 	COUNT=`expr $COUNT + 1`

 done
 cleanup
	#!/bin/sh
	#
	# Copyright (c) International Business Machines Corp., 2000
	#
	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
	# the GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
	#
	#
	#
	# FILE : ar
	#
	# PURPOSE: Construct one or more command lines which use options that do not
	# take arguments
	# For each of these invocations
	# Specify the options seperately
	#
	# Group the options together
	# Compare the behavior of the two cases
	# If they behave differently, then fail
	# If none of the cases fail, then pass
	#
	# HISTORY:
	# 06/01 Robbie Williamson ([email protected])
	# -Ported
	#
	#
	#-----------------------------------------------------------------------
	#
	#----------------------------------------------------------------------
	#Uncomment line below for debug output.
	#trace_logic=${trace_logic:-"set -x"}
	$trace_logic

	TCtmp=${TCtmp:-/tmp/ar01-$$}
	mkdir $TCtmp
	TCdat=${TCdat:-`pwd`}
	cd $TCdat

	LOOPS=${LOOPS:-1}
	LIST="file1.in file2.in file3.in file4.in file5.in file6.in file7.in file8.in file9.in file10.in"
	LIST="$LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST $LIST"
	COUNT=1
	TCRESULT=0

	# Setup function
	setup() {
	for i in $LIST;do
	touch $i
	done
	}

	# Cleanup function
	cleanup() {
	if [ $TCRESULT = 0 ]; then
	echo "---------------ar command passed the system test-----------------"
	exit 0
	else
	echo "---------------ar command failed the system test-----------------"
	exit 1
	fi
	}

	crtest() {
	if [ $? -ne 0 ]
	then
	TCRESULT=1
	echo "FAIL - could not create lib.a"
	cleanup
	fi
	}

	ttest() {
	if [ $? -ne 0 ]
	then
	TCRESULT=1
	echo "FAIL - could not output table from lib.a to lib.a.stdout"
	cleanup
	fi
	}

	rtest() {
	if [ $? -ne 0 ]
	then
	TCRESULT=1
	echo "FAIL - could not add file into lib.a"
	cleanup
	fi
	}

	mtest() {
	if [ $? -ne 0 ]
	then
	TCRESULT=1
	echo "FAIL - could not move file into lib.a"
	cleanup
	fi
	}

	setup

	# Main Loop
	while [ $COUNT -le $LOOPS ]
	do
	echo "-------System test for ar command, Loop $COUNT----"
	#The 'a' flag causes files to be placed after 'posname'.

	# CODE
	rm -rf $TCtmp/lib.a;cd $TCdat

	printf "file1.in\nfile2.in\nfile3.in\n" >$TCtmp/lib.a.exp

	ar -cr $TCtmp/lib.a file1.in file3.in
	crtest
	ar -ra file1.in $TCtmp/lib.a file2.in
	rtest
	ar -t $TCtmp/lib.a > $TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)1"
	else
	TCRESULT=1
	echo "FAIL - ar with -a option does not place files after 'posname'"
	fi

	# The 'a' flag with the 'm' option causes files to be moved after 'posname'

	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file1.in file2.in file3.in file4.in
	crtest
	printf "file1.in\nfile4.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -ma file1.in $TCtmp/lib.a file4.in
	mtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout 1> /dev/null 2> /dev/null
	then
	echo "-)2"
	else
	TCRESULT=2
	echo "FAIL - ar with -a option does not move files after 'posname'"
	fi

	# The 'b' flag causes files to be placed before 'posname'.

	# CODE

	rm -rf $TCtmp/lib.a
	cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file3.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -rb file3.in $TCtmp/lib.a file2.in
	rtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)3"
	else
	TCRESULT=3
	echo "FAIL - ar with -b option does not place files before 'posname'"
	fi

	# The 'b' flag with 'm' option causes files to be moved before 'posname'.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -mb file3.in $TCtmp/lib.a file2.in
	mtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)4"
	else
	TCRESULT=4
	echo "FAIL - ar with -b option does not move files before 'posname'."
	fi

	# -c option suppress the messages

	# CODE

	rm -rf $TCtmp/lib.a.exp $TCtmp/lib.a
	cd $TCdat

	touch $TCtmp/lib.a.exp

	ar -cr $TCtmp/lib.a file1.in > $TCtmp/lib.a.stdout
	crtest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout
	then
	echo "-)5"
	else
	TCRESULT=5
	echo "FAIL - ar with -c option did not suppress messages."
	fi

	# The 'qc' option causes suppresion of the default message when
	# 'afile' is created.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -qc $TCtmp/lib.a file1.in > $TCtmp/lib.a.stdout

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)6"
	else
	TCRESULT=6
	echo "FAIL - ar with -qc option did not suppress messages."
	fi

	# The -d option deletes files from archive when names are specified.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	echo "file3.in" > $TCtmp/lib.a.exp
	ar -d $TCtmp/lib.a file1.in file2.in
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)7"
	else
	TCRESULT=7
	echo "FAIL - ar with -d option does not delete files form the archive"
	fi

	# The -d option does not delete files from archive when no names
	# are specified.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	ar -d $TCtmp/lib.a >/dev/null 2>&1
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)8"
	else
	TCRESULT=8
	echo "FAIL - ar with -d option deleted files even when none were specified"
	fi

	# The -d does not affect behaviour of -s option.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	touch $TCtmp/dummy.in
	ar -cr $TCtmp/lib.a $TCtmp/dummy.in file1.in file2.in file3.in
	crtest
	size1=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`
	ar -ds $TCtmp/lib.a $TCtmp/dummy.in 2>&1 1>/dev/null
	size2=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`

	if [ $size1 -eq $size2 ]
	then
	echo "-)9"
	else
	TCRESULT=9
	echo "FAIL - ar with -d option did affect the -s option"
	fi

	# The 'i' flag causes files to be placed before 'posname'.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -cr $TCtmp/lib.a file1.in file3.in
	crtest
	ar -ri file3.in $TCtmp/lib.a file2.in
	rtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)10"
	else
	TCRESULT=10
	echo "FAIL - ar with -i did not place the files before 'posname'."
	fi

	# The 'i' flag with 'm' option causes files to be moved before 'posname'.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -mi file3.in $TCtmp/lib.a file2.in
	mtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)11"
	else
	TCRESULT=11
	echo "FAIL - ar with -i failed to move files before 'posname'."
	fi

	# m option moves the files to end of the archive

	# CODE

	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file1.in file3.in file2.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -m $TCtmp/lib.a file3.in
	mtest
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)12"
	else
	TCRESULT=12
	echo "FAIL - ar with -m fails to move the files to the end of archive"
	fi

	# The -p option causes only printing of contents of file contained in
	# archive.

	# CODE
	rm -rf $TCtmp/lib.*
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	printf "This is file one\nThis is file two\nThis is file three\n" > $TCtmp/lib.a.exp
	ar -p $TCtmp/lib.a 2>&1 1>$TCtmp/lib.a.stdout

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)13"
	else
	TCRESULT=13
	echo "FAIL - ar with -p option failed to print the contents."
	fi

	# The -p does not affect behaviour of -s option.

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	size1=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`
	ar -ps $TCtmp/lib.a 2>&1 1> /dev/null
	size2=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`

	if [ $size1 -eq $size2 ]
	then
	echo "-)14"
	else
	TCRESULT=14
	echo "FAIL - ar with -p did the affect behaviour of -s option"
	fi

	# The command 'ar -q afile name' appends name to the end of 'afile'.

	# CODE

	rm -rf $TCtmp/lib.a
	cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\nfile4.in\n" > $TCtmp/lib.a.exp
	ar -q $TCtmp/lib.a file4.in
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)15"
	else
	TCRESULT=15
	echo "FAIL - ar with -q afilename failed to append to the end of file"
	fi

	# q option does not affect the behaviour of option s

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	size1=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`
	ar -qs $TCtmp/lib.a $TCtmp/dummy.in 2>&1 1>/dev/null
	size2=`ls -s $TCtmp/lib.a\|(read a b; echo $a)`

	if [ $size1 -eq $size2 ]
	then
	echo "-)16"
	else
	TCRESULT=16
	echo "FAIL - ar with -q did affect the behaviour of -s option."
	fi

	# The -s causes regeneration of symbol table even if a symbol table exists.

	echo "-)17 SKIPPED due to binutils ar automatically adds a symbol."

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	printf "file1.in\nfile2.in\nfile3.in\n" > $TCtmp/lib.a.exp
	ar -t $TCtmp/lib.a >$TCtmp/lib.a.stdout 2>&1
	ttest

	if diff -b $TCtmp/lib.a.exp $TCtmp/lib.a.stdout >/dev/null 2>&1
	then
	echo "-)18"
	else
	TCRESULT=18
	echo "FAIL - ar with -t did not print as desired"
	fi

	# The -t does not affect behaviour of -s option.

	echo "-)19 SKIPPED due to binutils ar automatically adds a symbol."

	# The 'u' flag causes files only with later modification date than
	# in archive are replaced.

	# CODE
	rm -rf $TCtmp/lib.a
	cd $TCdat

	ar -cr $TCtmp/lib.a file0.in file2.in
	crtest
	File1time=`ar -tv $TCtmp/lib.a \| grep file0.in`
	File2time=`ar -tv $TCtmp/lib.a \| grep file2.in`

	#sleep 5
	touch -c -t 201503030303.55 file0.in

	ar -ru $TCtmp/lib.a file0.in file2.in 2>&1 1>/dev/null
	File1time1=`ar -tv $TCtmp/lib.a \| grep file0.in`
	File2time2=`ar -tv $TCtmp/lib.a \| grep file2.in`

	if [ "$File2time" = "$File2time2" ]
	then
	if [ "$File1time" = "$File1time1" ]
	then
	TCRESULT=20
	echo "FAIL - ar with -u flag failed"
	else
	echo "-)20"
	fi
	else
	TCRESULT=20
	echo "FAIL - ar with -u flag failed"
	fi
	# Reset the timestamp on file0.in to current
	touch file0.in

	# This is the next assertion

	# CODE

	Count=0
	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	Sysmonth=`date \| cut -f2 -d" "`
	Month=`ar -tv $TCtmp/lib.a \| grep "file2.in" \| awk '{print $4}'`
	Count=`ar -tv $TCtmp/lib.a \| wc -l`

	if [ $Sysmonth = $Month ] && [ $Count -eq 3 ]
	then
	echo "-)21"
	else
	TCRESULT=21
	echo "FAIL - ar with -v flag failed to print a line for each file"
	fi

	# The -v option produces a verbose listing like ls -n

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat $TCtmp/lib.a.exp *out
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest

	ls -ln --time-style=+%b" "%e" "%H:%M file1.in file2.in file3.in \|
	while read permissions link uid gid size month day time file_name
	do
	echo "$permissions;$uid/$gid;$size;$month;$day;$time;$file_name"
	done >> $TCtmp/lib.a.exp

	ar -tv $TCtmp/lib.a \|
	while read permissions uid size month day time year file_name
	do
	echo "-$permissions;$uid;$size;$month;$day;$time;$file_name"
	done >> $TCtmp/lib.a.stdout
	ttest

	diff $TCtmp/lib.a.exp $TCtmp/lib.a.stdout
	if [ $? -eq 0 ]
	then
	echo "-)22"
	else
	TCRESULT=22
	echo "FAIL - ar with -v failed to produce a verbose out put"
	fi

	# The 'v' option causes the 'x' option to display a filename for each
	# file extracted.

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	Count=`ar -xv $TCtmp/lib.a \| wc -l`

	if [ $Count = '3' ]
	then
	echo "-)23"
	else
	TCRESULT=23
	echo "FAIL - ar with -v along with x did not display extracted file names"
	fi

	# The command 'ar -x afile ' causes all files from the archive to be extracted.

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest

	Count=`ar -xv $TCtmp/lib.a \| wc -l`

	if [ $Count -eq '3' ]
	then
	echo "-)24"
	else
	TCRESULT=24
	echo "FAIL - ar with -x flag did not extract all file"
	fi

	# The command 'ar -x afile name name' causes only named files from
	# the archive to be extracted.

	# CODE
	rm -rf $TCtmp/lib.a;cd $TCdat
	ar -cr $TCtmp/lib.a file1.in file2.in file3.in
	crtest
	Count=`ar -xv $TCtmp/lib.a file1.in \| grep file \| wc -l`

	if [ $Count = '1' ]
	then
	echo "-)25"
	else
	TCRESULT=25
	echo "FAIL - ar with -x lib filename did not extract the named file alone"
	fi

	# This test will fail under pan, so it's commented out by default.
	echo "-)26 SKIPPED UNDER PAN"
	#
	# Signal SIGHUP

	# CODE

	rm -rf $TCtmp/lib.*

	ar -vr $TCtmp/lib.a $LIST >>$TCtmp/lib.a.stdout&
	while [ ! -s $TCtmp/lib.a ]
	do
	sleep 1
	done
	kill -s 2 $! >/dev/null 2>&1

	sleep 1
	if [ `wc -l $TCtmp/lib.a.stdout\|(read a b;echo $a)` -ne 100 ]
	then
	TCRESULT=27
	echo "FAIL - ar could not create the archive ; killed by SIGINIT"
	else
	echo "-)27"
	fi

	# Signal SIGQUIT

	# CODE

	rm -rf $TCtmp/lib.*

	ar -vr $TCtmp/lib.a $LIST >>$TCtmp/lib.a.stdout&
	while [ ! -s $TCtmp/lib.a ]
	do
	sleep 1
	done
	kill -s 3 $! >/dev/null 2>&1

	sleep 1
	if [ `wc -l $TCtmp/lib.a.stdout\|(read a b;echo $a)` -ne 100 ]
	then
	TCRESULT=28
	echo "FAIL - ar could not create the archive ; killed by SIGQUIT"
	else
	echo "-)28"
	fi

	# Signal SIGHUP; ar should not remove archive that existed before invocation.

	# CODE

	rm -rf $TCtmp/lib.a;cd $TCdat $TCtmp/lib.a.stdout
	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
	rtest
	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
	rtest
	while [ ! -s $TCtmp/lib.a ]
	do
	sleep 1
	done
	sleep 1
	kill -s 1 $! 2>&1 1>/dev/null \| read a

	if [ `wc -l $TCtmp/lib.a.stdout\|(read a b;echo $a)` -ne 103 ]
	then
	TCRESULT=29
	echo "FAIL - ar could not complete the archive ; killed by SIGHUP"
	else
	echo "-)29"
	fi

	# Signal SIGINIT; ar should not remove archive that existed before invocation.

	# CODE

	rm -rf $TCtmp/lib.a
	cd $TCdat $TCtmp/lib.a.stdout
	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
	rtest
	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
	rtest
	while [ ! -s $TCtmp/lib.a ]
	do
	sleep 1
	done
	sleep 1

	kill -s 2 $! 2>&1 1>/dev/null \| read a

	if [ `wc -l $TCtmp/lib.a.stdout\|(read a b;echo $a)` -ne 103 ]
	then
	TCRESULT=30
	echo "FAIL - ar could not complete the archive ; killed by SIGINIT"
	else
	echo "-)30"
	fi

	# Signal SIGQUIT; ar should not remove archive that existed before invocation.

	# CODE

	rm -rf $TCtmp/lib.a
	cd $TCdat
	ar -rv $TCtmp/lib.a file1.in file2.in file3.in 2>&1 1>$TCtmp/lib.a.stdout
	rtest
	ar -rv $TCtmp/lib.a $LIST 2>&1 1>>$TCtmp/lib.a.stdout&
	rtest
	while [ ! -s $TCtmp/lib.a ]
	do
	sleep 1
	done
	sleep 1
	kill -s 3 $! 2>&1 1>/dev/null \| read a

	if [ `wc -l $TCtmp/lib.a.stdout\|(read a b;echo $a)` -ne 103 ]
	then
	TCRESULT=31
	echo "FAIL - ar could not complete the archive ; killed by SIGQUIT"
	else
	echo "-)31"
	fi

	rm -rf $TCtmp
	COUNT=`expr $COUNT + 1`

	done
	cleanup