test/recipes/80-test_ssl_old.t - platform/external/openssl - Git at Google


            
            #! /usr/bin/env perl

            
            # Copyright 2015-2022 The OpenSSL Project Authors. All Rights Reserved.

            
            #

            
            # Licensed under the OpenSSL license (the "License").  You may not use

            
            # this file except in compliance with the License.  You can obtain a copy

            
            # in the file LICENSE in the source distribution or at

            
            # https://www.openssl.org/source/license.html


            use strict;

            
            use warnings;


            use POSIX;

            
            use File::Basename;

            
            use File::Copy;

            
            use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;

            
            use OpenSSL::Test::Utils;


            setup("test_ssl");


            $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");


            my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,

            
                $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,

            
                $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =

            
                anydisabled qw/rsa dsa dh ec psk

            
                               ssl3 tls1 tls1_1 tls1_2 tls1_3

            
                               dtls dtls1 dtls1_2 ct/;

            
            my $no_anytls = alldisabled(available_protocols("tls"));

            
            my $no_anydtls = alldisabled(available_protocols("dtls"));


            plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"

            
                if $no_anytls && $no_anydtls;


            my $digest = "-sha1";

            
            my @reqcmd = ("openssl", "req");

            
            my @x509cmd = ("openssl", "x509", $digest);

            
            my @verifycmd = ("openssl", "verify");

            
            my @gendsacmd = ("openssl", "gendsa");

            
            my $dummycnf = srctop_file("apps", "openssl.cnf");


            my $CAkey = "keyCA.ss";

            
            my $CAcert="certCA.ss";

            
            my $CAserial="certCA.srl";

            
            my $CAreq="reqCA.ss";

            
            my $CAconf=srctop_file("test","CAss.cnf");

            
            my $CAreq2="req2CA.ss";	# temp


            my $Uconf=srctop_file("test","Uss.cnf");

            
            my $Ukey="keyU.ss";

            
            my $Ureq="reqU.ss";

            
            my $Ucert="certU.ss";


            my $Dkey="keyD.ss";

            
            my $Dreq="reqD.ss";

            
            my $Dcert="certD.ss";


            my $Ekey="keyE.ss";

            
            my $Ereq="reqE.ss";

            
            my $Ecert="certE.ss";


            my $P1conf=srctop_file("test","P1ss.cnf");

            
            my $P1key="keyP1.ss";

            
            my $P1req="reqP1.ss";

            
            my $P1cert="certP1.ss";

            
            my $P1intermediate="tmp_intP1.ss";


            my $P2conf=srctop_file("test","P2ss.cnf");

            
            my $P2key="keyP2.ss";

            
            my $P2req="reqP2.ss";

            
            my $P2cert="certP2.ss";

            
            my $P2intermediate="tmp_intP2.ss";


            my $server_sess="server.ss";

            
            my $client_sess="client.ss";


            # ssltest_old.c is deprecated in favour of the new framework in ssl_test.c

            
            # If you're adding tests here, you probably want to convert them to the

            
            # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.

            
            plan tests =>

            
                1				# For testss

            
                +5  			# For the first testssl

            
                ;


            subtest 'test_ss' => sub {

            
                if (testss()) {

            
            	open OUT, ">", "intP1.ss";

            
            	copy($CAcert, \*OUT); copy($Ucert, \*OUT);

            
            	close OUT;


            	open OUT, ">", "intP2.ss";

            
            	copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);

            
            	close OUT;

            
                }

            
            };


            note('test_ssl -- key U');

            
            testssl("keyU.ss", $Ucert, $CAcert);


            # -----------

            
            # subtest functions

            
            sub testss {

            
                open RND, ">>", ".rnd";

            
                print RND "string to make the random number generator think it has randomness";

            
                close RND;


                my @req_dsa = ("-newkey",

            
                               "dsa:".srctop_file("apps", "dsa1024.pem"));

            
                my $dsaparams = srctop_file("apps", "dsa1024.pem");

            
                my @req_new;

            
                if ($no_rsa) {

            
            	@req_new = @req_dsa;

            
                } else {

            
            	@req_new = ("-new");

            
                }


                plan tests => 17;


              SKIP: {

            
                  skip 'failure', 16 unless

            
            	  ok(run(app([@reqcmd, "-config", $CAconf,

            
            		      "-out", $CAreq, "-keyout", $CAkey,

            
            		      @req_new])),

            
            	     'make cert request');


                  skip 'failure', 15 unless

            
            	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",

            
            		      "-req", "-out", $CAcert, "-signkey", $CAkey,

            
            		      "-extfile", $CAconf, "-extensions", "v3_ca"],

            
            		     stdout => "err.ss")),

            
            	     'convert request into self-signed cert');


                  skip 'failure', 14 unless

            
            	  ok(run(app([@x509cmd, "-in", $CAcert,

            
            		      "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],

            
            		     stdout => "err.ss")),

            
            	     'convert cert into a cert request');


                  skip 'failure', 13 unless

            
            	  ok(run(app([@reqcmd, "-config", $dummycnf,

            
            		      "-verify", "-in", $CAreq, "-noout"])),

            
            	     'verify request 1');


                  skip 'failure', 12 unless

            
            	  ok(run(app([@reqcmd, "-config", $dummycnf,

            
            		      "-verify", "-in", $CAreq2, "-noout"])),

            
            	     'verify request 2');


                  skip 'failure', 11 unless

            
            	  ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),

            
            	     'verify signature');


                  skip 'failure', 10 unless

            
            	  ok(run(app([@reqcmd, "-config", $Uconf,

            
            		      "-out", $Ureq, "-keyout", $Ukey, @req_new],

            
            		     stdout => "err.ss")),

            
            	     'make a user cert request');


                  skip 'failure', 9 unless

            
            	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",

            
            		      "-req", "-out", $Ucert,

            
            		      "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,

            
            		      "-extfile", $Uconf, "-extensions", "v3_ee"],

            
            		     stdout => "err.ss"))

            
            	     && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),

            
            	     'sign user cert request');


                  skip 'failure', 8 unless

            
            	  ok(run(app([@x509cmd,

            
            		      "-subject", "-issuer", "-startdate", "-enddate",

            
            		      "-noout", "-in", $Ucert])),

            
            	     'Certificate details');


                  skip 'failure', 7 unless

            
                      subtest 'DSA certificate creation' => sub {

            
                          plan skip_all => "skipping DSA certificate creation"

            
                              if $no_dsa;


                          plan tests => 5;


                        SKIP: {

            
                            $ENV{CN2} = "DSA Certificate";

            
                            skip 'failure', 4 unless

            
                                ok(run(app([@gendsacmd, "-out", $Dkey,

            
                                            $dsaparams],

            
                                           stdout => "err.ss")),

            
                                   "make a DSA key");

            
                            skip 'failure', 3 unless

            
                                ok(run(app([@reqcmd, "-new", "-config", $Uconf,

            
                                            "-out", $Dreq, "-key", $Dkey],

            
                                           stdout => "err.ss")),

            
                                   "make a DSA user cert request");

            
                            skip 'failure', 2 unless

            
                                ok(run(app([@x509cmd, "-CAcreateserial",

            
                                            "-in", $Dreq,

            
                                            "-days", "30",

            
                                            "-req",

            
                                            "-out", $Dcert,

            
                                            "-CA", $CAcert, "-CAkey", $CAkey,

            
                                            "-CAserial", $CAserial,

            
                                            "-extfile", $Uconf,

            
                                            "-extensions", "v3_ee_dsa"],

            
                                           stdout => "err.ss")),

            
                                   "sign DSA user cert request");

            
                            skip 'failure', 1 unless

            
                                ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),

            
                                   "verify DSA user cert");

            
                            skip 'failure', 0 unless

            
                                ok(run(app([@x509cmd,

            
                                            "-subject", "-issuer",

            
                                            "-startdate", "-enddate", "-noout",

            
                                            "-in", $Dcert])),

            
                                   "DSA Certificate details");

            
                          }

            
                  };


                  skip 'failure', 6 unless

            
                      subtest 'ECDSA/ECDH certificate creation' => sub {

            
                          plan skip_all => "skipping ECDSA/ECDH certificate creation"

            
                              if $no_ec;


                          plan tests => 5;


                        SKIP: {

            
                            $ENV{CN2} = "ECDSA Certificate";

            
                            skip 'failure', 4 unless

            
                                ok(run(app(["openssl", "ecparam", "-name", "P-256",

            
                                            "-out", "ecp.ss"])),

            
                                   "make EC parameters");

            
                            skip 'failure', 3 unless

            
                                ok(run(app([@reqcmd, "-config", $Uconf,

            
                                            "-out", $Ereq, "-keyout", $Ekey,

            
                                            "-newkey", "ec:ecp.ss"],

            
                                           stdout => "err.ss")),

            
                                   "make a ECDSA/ECDH user cert request");

            
                            skip 'failure', 2 unless

            
                                ok(run(app([@x509cmd, "-CAcreateserial",

            
                                            "-in", $Ereq,

            
                                            "-days", "30",

            
                                            "-req",

            
                                            "-out", $Ecert,

            
                                            "-CA", $CAcert, "-CAkey", $CAkey,

            
                                            "-CAserial", $CAserial,

            
                                            "-extfile", $Uconf,

            
                                            "-extensions", "v3_ee_ec"],

            
                                           stdout => "err.ss")),

            
                                   "sign ECDSA/ECDH user cert request");

            
                            skip 'failure', 1 unless

            
                                ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),

            
                                   "verify ECDSA/ECDH user cert");

            
                            skip 'failure', 0 unless

            
                                ok(run(app([@x509cmd,

            
                                            "-subject", "-issuer",

            
                                            "-startdate", "-enddate", "-noout",

            
                                            "-in", $Ecert])),

            
                                   "ECDSA Certificate details");

            
                          }

            
                  };


                  skip 'failure', 5 unless

            
            	  ok(run(app([@reqcmd, "-config", $P1conf,

            
            		      "-out", $P1req, "-keyout", $P1key, @req_new],

            
            		     stdout => "err.ss")),

            
            	     'make a proxy cert request');


                  skip 'failure', 4 unless

            
            	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",

            
            		      "-req", "-out", $P1cert,

            
            		      "-CA", $Ucert, "-CAkey", $Ukey,

            
            		      "-extfile", $P1conf, "-extensions", "v3_proxy"],

            
            		     stdout => "err.ss")),

            
            	     'sign proxy with user cert');


                  copy($Ucert, $P1intermediate);

            
                  run(app([@verifycmd, "-CAfile", $CAcert,

            
            	       "-untrusted", $P1intermediate, $P1cert]));

            
                  ok(run(app([@x509cmd,

            
            		  "-subject", "-issuer", "-startdate", "-enddate",

            
            		  "-noout", "-in", $P1cert])),

            
            	 'Certificate details');


                  skip 'failure', 2 unless

            
            	  ok(run(app([@reqcmd, "-config", $P2conf,

            
            		      "-out", $P2req, "-keyout", $P2key,

            
            		      @req_new],

            
            		     stdout => "err.ss")),

            
            	     'make another proxy cert request');


                  skip 'failure', 1 unless

            
            	  ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",

            
            		      "-req", "-out", $P2cert,

            
            		      "-CA", $P1cert, "-CAkey", $P1key,

            
            		      "-extfile", $P2conf, "-extensions", "v3_proxy"],

            
            		     stdout => "err.ss")),

            
            	     'sign second proxy cert request with the first proxy cert');


                  open OUT, ">", $P2intermediate;

            
                  copy($Ucert, \*OUT); copy($P1cert, \*OUT);

            
                  close OUT;

            
                  run(app([@verifycmd, "-CAfile", $CAcert,

            
            	       "-untrusted", $P2intermediate, $P2cert]));

            
                  ok(run(app([@x509cmd,

            
            		  "-subject", "-issuer", "-startdate", "-enddate",

            
            		  "-noout", "-in", $P2cert])),

            
            	 'Certificate details');

            
                }

            
            }


            sub testssl {

            
                my ($key, $cert, $CAtmp) = @_;

            
                my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));


                my @ssltest = ("ssltest_old",

            
            		   "-s_key", $key, "-s_cert", $cert,

            
            		   "-c_key", $key, "-c_cert", $cert);


                my $serverinfo = srctop_file("test","serverinfo.pem");


                my $dsa_cert = 0;

            
                if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,

            
            					"-text", "-noout"]), capture => 1)) {

            
            	$dsa_cert = 1;

            
                }


                # plan tests => 11;


                subtest 'standard SSL tests' => sub {

            
            	######################################################################

            
                  plan tests => 13;


                  SKIP: {

            
            	  skip "SSLv3 is not supported by this OpenSSL build", 4

            
            	      if disabled("ssl3");


            	  ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),

            
            	     'test sslv3 via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),

            
            	     'test sslv3 with server authentication via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),

            
            	     'test sslv3 with client authentication via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),

            
            	     'test sslv3 with both server and client authentication via BIO pair');

            
            	}


                  SKIP: {

            
            	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1

            
            	      if $no_anytls;


            	  ok(run(test([@ssltest, "-bio_pair"])),

            
            	     'test sslv2/sslv3 via BIO pair');

            
            	}


                  SKIP: {

            
            	  skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8

            
            	      if $no_anytls;


            	SKIP: {

            
            	    skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;


            	    ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),

            
            	       'test sslv2/sslv3 w/o (EC)DHE via BIO pair');

            
            	  }


            	  ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),

            
            	     'test sslv2/sslv3 with 1024bit DHE via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),

            
            	     'test sslv2/sslv3 with server authentication');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),

            
            	     'test sslv2/sslv3 with client authentication via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),

            
            	     'test sslv2/sslv3 with both client and server authentication via BIO pair');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),

            
            	     'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');


                    SKIP: {

            
                        skip "No IPv4 available on this machine", 1

            
                            unless !disabled("sock") && have_IPv4();

            
                        ok(run(test([@ssltest, "-ipv4"])),

            
                           'test TLS via IPv4');

            
                      }


                    SKIP: {

            
                        skip "No IPv6 available on this machine", 1

            
                            unless !disabled("sock") && have_IPv6();

            
                        ok(run(test([@ssltest, "-ipv6"])),

            
                           'test TLS via IPv6');

            
                      }

            
                    }

            
                };


                subtest "Testing ciphersuites" => sub {


                    my @exkeys = ();

            
                    my $ciphers = "-PSK:-SRP";


                    if (!$no_dsa) {

            
                        push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";

            
                    }


                    if (!$no_ec) {

            
                        push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";

            
                    }


            	my @protocols = ();

            
            	# We only use the flags that ssltest_old understands

            
            	push @protocols, "-tls1_3" unless $no_tls1_3;

            
            	push @protocols, "-tls1_2" unless $no_tls1_2;

            
            	push @protocols, "-tls1" unless $no_tls1;

            
            	push @protocols, "-ssl3" unless $no_ssl3;

            
            	my $protocolciphersuitecount = 0;

            
            	my %ciphersuites = ();

            
            	my %ciphersstatus = ();

            
            	foreach my $protocol (@protocols) {

            
            	    my $ciphersstatus = undef;

            
            	    my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,

            
            				   "ALL:$ciphers"]),

            
            			      capture => 1, statusvar => \$ciphersstatus);

            
            	    $ciphersstatus{$protocol} = $ciphersstatus;

            
            	    if ($ciphersstatus) {

            
            		$ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }

            
            					     @ciphers ];

            
            		$protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};

            
            	    }

            
            	}


                    plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"

            
                        if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;


                    # The count of protocols is because in addition to the ciphersuites

            
                    # we got above, we're running a weak DH test for each protocol (except

            
                    # TLSv1.3)

            
                    my $testcount = scalar(@protocols) + $protocolciphersuitecount

            
                                    + scalar(keys %ciphersuites);

            
                    $testcount-- unless $no_tls1_3;

            
                    plan tests => $testcount;


                    foreach my $protocol (@protocols) {

            
                        ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");

            
                    }


                    foreach my $protocol (sort keys %ciphersuites) {

            
                        note "Testing ciphersuites for $protocol";

            
                        # ssltest_old doesn't know -tls1_3, but that's fine, since that's

            
                        # the default choice if TLSv1.3 enabled

            
                        my $flag = $protocol eq "-tls1_3" ? "" : $protocol;

            
                        my $ciphersuites = "";

            
                        foreach my $cipher (@{$ciphersuites{$protocol}}) {

            
                            if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {

            
                                note "*****SKIPPING $protocol $cipher";

            
                                ok(1);

            
                            } else {

            
                                if ($protocol eq "-tls1_3") {

            
                                    $ciphersuites = $cipher;

            
                                    $cipher = "";

            
                                }

            
                                ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,

            
                                             "-ciphersuites", $ciphersuites, $flag || ()])),

            
                                   "Testing $cipher");

            
                            }

            
                        }

            
                        next if $protocol eq "-tls1_3";

            
                        is(run(test([@ssltest,

            
                                     "-s_cipher", "EDH",

            
                                     "-c_cipher", 'EDH:@SECLEVEL=1',

            
                                     "-dhe512",

            
                                     $protocol])), 0,

            
                           "testing connection with weak DH, expecting failure");

            
                    }

            
                };


                subtest 'RSA/(EC)DHE/PSK tests' => sub {

            
            	######################################################################


            	plan tests => 10;


                  SKIP: {

            
            	  skip "TLSv1.0 is not supported by this OpenSSL build", 6

            
            	      if $no_tls1;


            	SKIP: {

            
            	    skip "skipping anonymous DH tests", 1

            
            	      if ($no_dh);


            	    ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),

            
            	       'test tlsv1 with 1024bit anonymous DH, multiple handshakes');

            
            	  }


            	SKIP: {

            
            	    skip "skipping RSA tests", 2

            
            		if $no_rsa;


            	    ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),

            
            	       'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');


            	    skip "skipping RSA+DHE tests", 1

            
            		if $no_dh;


            	    ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),

            
            	       'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');

            
            	  }


            	SKIP: {

            
            	    skip "skipping PSK tests", 2

            
            	        if ($no_psk);


            	    ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),

            
            	       'test tls1 with PSK');


            	    ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),

            
            	       'test tls1 with PSK via BIO pair');

            
            	  }


            	SKIP: {

            
            	    skip "skipping auto PSK tests", 1

            
            	        if ($no_dh || $no_psk || $no_ec);


            	    ok(run(test(['ssltest_old', '-dhe2048', '-psk', '0102030405', '-cipher', '@SECLEVEL=2:DHE-PSK-AES128-CCM'])),

            
            	       'test auto DH meets security strength');

            
            	  }

            
            	}


                  SKIP: {

            
                        skip "TLSv1.1 is not supported by this OpenSSL build", 4

            
                            if $no_tls1_1;


                    SKIP: {

            
                        skip "skipping auto DHE PSK test at SECLEVEL 3", 1

            
                            if ($no_dh || $no_psk);


                        ok(run(test(['ssltest_old', '-tls1_1', '-dhe4096', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:DHE-PSK-AES256-CBC-SHA384'])),

            
                           'test auto DHE PSK meets security strength');

            
                      }


                    SKIP: {

            
                        skip "skipping auto ECDHE PSK test at SECLEVEL 3", 1

            
                            if ($no_ec || $no_psk);


                        ok(run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:ECDHE-PSK-AES256-CBC-SHA384'])),

            
                           'test auto ECDHE PSK meets security strength');

            
                      }


                    SKIP: {

            
                        skip "skipping no RSA PSK at SECLEVEL 3 test", 1

            
                            if ($no_rsa || $no_psk);


                        ok(!run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:RSA-PSK-AES256-CBC-SHA384'])),

            
                           'test auto RSA PSK does not meet security level 3 requirements (PFS)');

            
                      }


                    SKIP: {

            
                        skip "skipping no PSK at SECLEVEL 3 test", 1

            
                            if ($no_psk);


                        ok(!run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:PSK-AES256-CBC-SHA384'])),

            
                           'test auto PSK does not meet security level 3 requirements (PFS)');

            
                      }

            
            	}


                };


                subtest 'Custom Extension tests' => sub {

            
            	######################################################################


            	plan tests => 1;


                  SKIP: {

            
            	  skip "TLSv1.0 is not supported by this OpenSSL build", 1

            
            	      if $no_tls1;


            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),

            
            	     'test tls1 with custom extensions');

            
            	}

            
                };


                subtest 'Serverinfo tests' => sub {

            
            	######################################################################


            	plan tests => 5;


                  SKIP: {

            
            	  skip "TLSv1.0 is not supported by this OpenSSL build", 5

            
            	      if $no_tls1;


            	  note('echo test tls1 with serverinfo');

            
            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));

            
            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));

            
            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));

            
            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));

            
            	  ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));

            
            	}

            
                };

            
            }


            unlink $CAkey;

            
            unlink $CAcert;

            
            unlink $CAserial;

            
            unlink $CAreq;

            
            unlink $CAreq2;


            unlink $Ukey;

            
            unlink $Ureq;

            
            unlink $Ucert;

            
            unlink basename($Ucert, '.ss').'.srl';


            unlink $Dkey;

            
            unlink $Dreq;

            
            unlink $Dcert;


            unlink $Ekey;

            
            unlink $Ereq;

            
            unlink $Ecert;


            unlink $P1key;

            
            unlink $P1req;

            
            unlink $P1cert;

            
            unlink basename($P1cert, '.ss').'.srl';

            
            unlink $P1intermediate;

            
            unlink "intP1.ss";


            unlink $P2key;

            
            unlink $P2req;

            
            unlink $P2cert;

            
            unlink $P2intermediate;

            
            unlink "intP2.ss";


            unlink "ecp.ss";

            
            unlink "err.ss";


            unlink $server_sess;

            
            unlink $client_sess;
	#! /usr/bin/env perl
	# Copyright 2015-2022 The OpenSSL Project Authors. All Rights Reserved.
	#
	# Licensed under the OpenSSL license (the "License"). You may not use
	# this file except in compliance with the License. You can obtain a copy
	# in the file LICENSE in the source distribution or at
	# https://www.openssl.org/source/license.html


	use strict;
	use warnings;

	use POSIX;
	use File::Basename;
	use File::Copy;
	use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
	use OpenSSL::Test::Utils;

	setup("test_ssl");

	$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");

	my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
	$no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
	$no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
	anydisabled qw/rsa dsa dh ec psk
	ssl3 tls1 tls1_1 tls1_2 tls1_3
	dtls dtls1 dtls1_2 ct/;
	my $no_anytls = alldisabled(available_protocols("tls"));
	my $no_anydtls = alldisabled(available_protocols("dtls"));

	plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
	if $no_anytls && $no_anydtls;

	my $digest = "-sha1";
	my @reqcmd = ("openssl", "req");
	my @x509cmd = ("openssl", "x509", $digest);
	my @verifycmd = ("openssl", "verify");
	my @gendsacmd = ("openssl", "gendsa");
	my $dummycnf = srctop_file("apps", "openssl.cnf");

	my $CAkey = "keyCA.ss";
	my $CAcert="certCA.ss";
	my $CAserial="certCA.srl";
	my $CAreq="reqCA.ss";
	my $CAconf=srctop_file("test","CAss.cnf");
	my $CAreq2="req2CA.ss"; # temp

	my $Uconf=srctop_file("test","Uss.cnf");
	my $Ukey="keyU.ss";
	my $Ureq="reqU.ss";
	my $Ucert="certU.ss";

	my $Dkey="keyD.ss";
	my $Dreq="reqD.ss";
	my $Dcert="certD.ss";

	my $Ekey="keyE.ss";
	my $Ereq="reqE.ss";
	my $Ecert="certE.ss";

	my $P1conf=srctop_file("test","P1ss.cnf");
	my $P1key="keyP1.ss";
	my $P1req="reqP1.ss";
	my $P1cert="certP1.ss";
	my $P1intermediate="tmp_intP1.ss";

	my $P2conf=srctop_file("test","P2ss.cnf");
	my $P2key="keyP2.ss";
	my $P2req="reqP2.ss";
	my $P2cert="certP2.ss";
	my $P2intermediate="tmp_intP2.ss";

	my $server_sess="server.ss";
	my $client_sess="client.ss";

	# ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
	# If you're adding tests here, you probably want to convert them to the
	# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
	plan tests =>
	1 # For testss
	+5 # For the first testssl
	;

	subtest 'test_ss' => sub {
	if (testss()) {
	open OUT, ">", "intP1.ss";
	copy($CAcert, \OUT); copy($Ucert, \OUT);
	close OUT;

	open OUT, ">", "intP2.ss";
	copy($CAcert, \OUT); copy($Ucert, \OUT); copy($P1cert, \*OUT);
	close OUT;
	}
	};

	note('test_ssl -- key U');
	testssl("keyU.ss", $Ucert, $CAcert);

	# -----------
	# subtest functions
	sub testss {
	open RND, ">>", ".rnd";
	print RND "string to make the random number generator think it has randomness";
	close RND;

	my @req_dsa = ("-newkey",
	"dsa:".srctop_file("apps", "dsa1024.pem"));
	my $dsaparams = srctop_file("apps", "dsa1024.pem");
	my @req_new;
	if ($no_rsa) {
	@req_new = @req_dsa;
	} else {
	@req_new = ("-new");
	}

	plan tests => 17;

	SKIP: {
	skip 'failure', 16 unless
	ok(run(app([@reqcmd, "-config", $CAconf,
	"-out", $CAreq, "-keyout", $CAkey,
	@req_new])),
	'make cert request');

	skip 'failure', 15 unless
	ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
	"-req", "-out", $CAcert, "-signkey", $CAkey,
	"-extfile", $CAconf, "-extensions", "v3_ca"],
	stdout => "err.ss")),
	'convert request into self-signed cert');

	skip 'failure', 14 unless
	ok(run(app([@x509cmd, "-in", $CAcert,
	"-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
	stdout => "err.ss")),
	'convert cert into a cert request');

	skip 'failure', 13 unless
	ok(run(app([@reqcmd, "-config", $dummycnf,
	"-verify", "-in", $CAreq, "-noout"])),
	'verify request 1');


	skip 'failure', 12 unless
	ok(run(app([@reqcmd, "-config", $dummycnf,
	"-verify", "-in", $CAreq2, "-noout"])),
	'verify request 2');

	skip 'failure', 11 unless
	ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
	'verify signature');

	skip 'failure', 10 unless
	ok(run(app([@reqcmd, "-config", $Uconf,
	"-out", $Ureq, "-keyout", $Ukey, @req_new],
	stdout => "err.ss")),
	'make a user cert request');

	skip 'failure', 9 unless
	ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
	"-req", "-out", $Ucert,
	"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
	"-extfile", $Uconf, "-extensions", "v3_ee"],
	stdout => "err.ss"))
	&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
	'sign user cert request');

	skip 'failure', 8 unless
	ok(run(app([@x509cmd,
	"-subject", "-issuer", "-startdate", "-enddate",
	"-noout", "-in", $Ucert])),
	'Certificate details');

	skip 'failure', 7 unless
	subtest 'DSA certificate creation' => sub {
	plan skip_all => "skipping DSA certificate creation"
	if $no_dsa;

	plan tests => 5;

	SKIP: {
	$ENV{CN2} = "DSA Certificate";
	skip 'failure', 4 unless
	ok(run(app([@gendsacmd, "-out", $Dkey,
	$dsaparams],
	stdout => "err.ss")),
	"make a DSA key");
	skip 'failure', 3 unless
	ok(run(app([@reqcmd, "-new", "-config", $Uconf,
	"-out", $Dreq, "-key", $Dkey],
	stdout => "err.ss")),
	"make a DSA user cert request");
	skip 'failure', 2 unless
	ok(run(app([@x509cmd, "-CAcreateserial",
	"-in", $Dreq,
	"-days", "30",
	"-req",
	"-out", $Dcert,
	"-CA", $CAcert, "-CAkey", $CAkey,
	"-CAserial", $CAserial,
	"-extfile", $Uconf,
	"-extensions", "v3_ee_dsa"],
	stdout => "err.ss")),
	"sign DSA user cert request");
	skip 'failure', 1 unless
	ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
	"verify DSA user cert");
	skip 'failure', 0 unless
	ok(run(app([@x509cmd,
	"-subject", "-issuer",
	"-startdate", "-enddate", "-noout",
	"-in", $Dcert])),
	"DSA Certificate details");
	}
	};

	skip 'failure', 6 unless
	subtest 'ECDSA/ECDH certificate creation' => sub {
	plan skip_all => "skipping ECDSA/ECDH certificate creation"
	if $no_ec;

	plan tests => 5;

	SKIP: {
	$ENV{CN2} = "ECDSA Certificate";
	skip 'failure', 4 unless
	ok(run(app(["openssl", "ecparam", "-name", "P-256",
	"-out", "ecp.ss"])),
	"make EC parameters");
	skip 'failure', 3 unless
	ok(run(app([@reqcmd, "-config", $Uconf,
	"-out", $Ereq, "-keyout", $Ekey,
	"-newkey", "ec:ecp.ss"],
	stdout => "err.ss")),
	"make a ECDSA/ECDH user cert request");
	skip 'failure', 2 unless
	ok(run(app([@x509cmd, "-CAcreateserial",
	"-in", $Ereq,
	"-days", "30",
	"-req",
	"-out", $Ecert,
	"-CA", $CAcert, "-CAkey", $CAkey,
	"-CAserial", $CAserial,
	"-extfile", $Uconf,
	"-extensions", "v3_ee_ec"],
	stdout => "err.ss")),
	"sign ECDSA/ECDH user cert request");
	skip 'failure', 1 unless
	ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
	"verify ECDSA/ECDH user cert");
	skip 'failure', 0 unless
	ok(run(app([@x509cmd,
	"-subject", "-issuer",
	"-startdate", "-enddate", "-noout",
	"-in", $Ecert])),
	"ECDSA Certificate details");
	}
	};

	skip 'failure', 5 unless
	ok(run(app([@reqcmd, "-config", $P1conf,
	"-out", $P1req, "-keyout", $P1key, @req_new],
	stdout => "err.ss")),
	'make a proxy cert request');


	skip 'failure', 4 unless
	ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
	"-req", "-out", $P1cert,
	"-CA", $Ucert, "-CAkey", $Ukey,
	"-extfile", $P1conf, "-extensions", "v3_proxy"],
	stdout => "err.ss")),
	'sign proxy with user cert');

	copy($Ucert, $P1intermediate);
	run(app([@verifycmd, "-CAfile", $CAcert,
	"-untrusted", $P1intermediate, $P1cert]));
	ok(run(app([@x509cmd,
	"-subject", "-issuer", "-startdate", "-enddate",
	"-noout", "-in", $P1cert])),
	'Certificate details');

	skip 'failure', 2 unless
	ok(run(app([@reqcmd, "-config", $P2conf,
	"-out", $P2req, "-keyout", $P2key,
	@req_new],
	stdout => "err.ss")),
	'make another proxy cert request');


	skip 'failure', 1 unless
	ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
	"-req", "-out", $P2cert,
	"-CA", $P1cert, "-CAkey", $P1key,
	"-extfile", $P2conf, "-extensions", "v3_proxy"],
	stdout => "err.ss")),
	'sign second proxy cert request with the first proxy cert');


	open OUT, ">", $P2intermediate;
	copy($Ucert, \OUT); copy($P1cert, \OUT);
	close OUT;
	run(app([@verifycmd, "-CAfile", $CAcert,
	"-untrusted", $P2intermediate, $P2cert]));
	ok(run(app([@x509cmd,
	"-subject", "-issuer", "-startdate", "-enddate",
	"-noout", "-in", $P2cert])),
	'Certificate details');
	}
	}

	sub testssl {
	my ($key, $cert, $CAtmp) = @_;
	my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));

	my @ssltest = ("ssltest_old",
	"-s_key", $key, "-s_cert", $cert,
	"-c_key", $key, "-c_cert", $cert);

	my $serverinfo = srctop_file("test","serverinfo.pem");

	my $dsa_cert = 0;
	if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
	"-text", "-noout"]), capture => 1)) {
	$dsa_cert = 1;
	}


	# plan tests => 11;

	subtest 'standard SSL tests' => sub {
	######################################################################
	plan tests => 13;

	SKIP: {
	skip "SSLv3 is not supported by this OpenSSL build", 4
	if disabled("ssl3");

	ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
	'test sslv3 via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
	'test sslv3 with server authentication via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
	'test sslv3 with client authentication via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
	'test sslv3 with both server and client authentication via BIO pair');
	}

	SKIP: {
	skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
	if $no_anytls;

	ok(run(test([@ssltest, "-bio_pair"])),
	'test sslv2/sslv3 via BIO pair');
	}

	SKIP: {
	skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
	if $no_anytls;

	SKIP: {
	skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;

	ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
	'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
	}

	ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
	'test sslv2/sslv3 with 1024bit DHE via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
	'test sslv2/sslv3 with server authentication');
	ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
	'test sslv2/sslv3 with client authentication via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
	'test sslv2/sslv3 with both client and server authentication via BIO pair');
	ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
	'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');

	SKIP: {
	skip "No IPv4 available on this machine", 1
	unless !disabled("sock") && have_IPv4();
	ok(run(test([@ssltest, "-ipv4"])),
	'test TLS via IPv4');
	}

	SKIP: {
	skip "No IPv6 available on this machine", 1
	unless !disabled("sock") && have_IPv6();
	ok(run(test([@ssltest, "-ipv6"])),
	'test TLS via IPv6');
	}
	}
	};

	subtest "Testing ciphersuites" => sub {

	my @exkeys = ();
	my $ciphers = "-PSK:-SRP";

	if (!$no_dsa) {
	push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
	}

	if (!$no_ec) {
	push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
	}

	my @protocols = ();
	# We only use the flags that ssltest_old understands
	push @protocols, "-tls1_3" unless $no_tls1_3;
	push @protocols, "-tls1_2" unless $no_tls1_2;
	push @protocols, "-tls1" unless $no_tls1;
	push @protocols, "-ssl3" unless $no_ssl3;
	my $protocolciphersuitecount = 0;
	my %ciphersuites = ();
	my %ciphersstatus = ();
	foreach my $protocol (@protocols) {
	my $ciphersstatus = undef;
	my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
	"ALL:$ciphers"]),
	capture => 1, statusvar => \$ciphersstatus);
	$ciphersstatus{$protocol} = $ciphersstatus;
	if ($ciphersstatus) {
	$ciphersuites{$protocol} = [ map { s\|\R\|\|; split(/:/, $_) }
	@ciphers ];
	$protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
	}
	}

	plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
	if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;

	# The count of protocols is because in addition to the ciphersuites
	# we got above, we're running a weak DH test for each protocol (except
	# TLSv1.3)
	my $testcount = scalar(@protocols) + $protocolciphersuitecount
	+ scalar(keys %ciphersuites);
	$testcount-- unless $no_tls1_3;
	plan tests => $testcount;

	foreach my $protocol (@protocols) {
	ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
	}

	foreach my $protocol (sort keys %ciphersuites) {
	note "Testing ciphersuites for $protocol";
	# ssltest_old doesn't know -tls1_3, but that's fine, since that's
	# the default choice if TLSv1.3 enabled
	my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
	my $ciphersuites = "";
	foreach my $cipher (@{$ciphersuites{$protocol}}) {
	if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
	note "*****SKIPPING $protocol $cipher";
	ok(1);
	} else {
	if ($protocol eq "-tls1_3") {
	$ciphersuites = $cipher;
	$cipher = "";
	}
	ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
	"-ciphersuites", $ciphersuites, $flag \|\| ()])),
	"Testing $cipher");
	}
	}
	next if $protocol eq "-tls1_3";
	is(run(test([@ssltest,
	"-s_cipher", "EDH",
	"-c_cipher", 'EDH:@SECLEVEL=1',
	"-dhe512",
	$protocol])), 0,
	"testing connection with weak DH, expecting failure");
	}
	};

	subtest 'RSA/(EC)DHE/PSK tests' => sub {
	######################################################################

	plan tests => 10;

	SKIP: {
	skip "TLSv1.0 is not supported by this OpenSSL build", 6
	if $no_tls1;

	SKIP: {
	skip "skipping anonymous DH tests", 1
	if ($no_dh);

	ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
	'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
	}

	SKIP: {
	skip "skipping RSA tests", 2
	if $no_rsa;

	ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
	'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');

	skip "skipping RSA+DHE tests", 1
	if $no_dh;

	ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
	'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
	}

	SKIP: {
	skip "skipping PSK tests", 2
	if ($no_psk);

	ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
	'test tls1 with PSK');

	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
	'test tls1 with PSK via BIO pair');
	}

	SKIP: {
	skip "skipping auto PSK tests", 1
	if ($no_dh \|\| $no_psk \|\| $no_ec);

	ok(run(test(['ssltest_old', '-dhe2048', '-psk', '0102030405', '-cipher', '@SECLEVEL=2:DHE-PSK-AES128-CCM'])),
	'test auto DH meets security strength');
	}
	}

	SKIP: {
	skip "TLSv1.1 is not supported by this OpenSSL build", 4
	if $no_tls1_1;

	SKIP: {
	skip "skipping auto DHE PSK test at SECLEVEL 3", 1
	if ($no_dh \|\| $no_psk);

	ok(run(test(['ssltest_old', '-tls1_1', '-dhe4096', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:DHE-PSK-AES256-CBC-SHA384'])),
	'test auto DHE PSK meets security strength');
	}

	SKIP: {
	skip "skipping auto ECDHE PSK test at SECLEVEL 3", 1
	if ($no_ec \|\| $no_psk);

	ok(run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:ECDHE-PSK-AES256-CBC-SHA384'])),
	'test auto ECDHE PSK meets security strength');
	}

	SKIP: {
	skip "skipping no RSA PSK at SECLEVEL 3 test", 1
	if ($no_rsa \|\| $no_psk);

	ok(!run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:RSA-PSK-AES256-CBC-SHA384'])),
	'test auto RSA PSK does not meet security level 3 requirements (PFS)');
	}

	SKIP: {
	skip "skipping no PSK at SECLEVEL 3 test", 1
	if ($no_psk);

	ok(!run(test(['ssltest_old', '-tls1_1', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:PSK-AES256-CBC-SHA384'])),
	'test auto PSK does not meet security level 3 requirements (PFS)');
	}
	}

	};

	subtest 'Custom Extension tests' => sub {
	######################################################################

	plan tests => 1;

	SKIP: {
	skip "TLSv1.0 is not supported by this OpenSSL build", 1
	if $no_tls1;

	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
	'test tls1 with custom extensions');
	}
	};

	subtest 'Serverinfo tests' => sub {
	######################################################################

	plan tests => 5;

	SKIP: {
	skip "TLSv1.0 is not supported by this OpenSSL build", 5
	if $no_tls1;

	note('echo test tls1 with serverinfo');
	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
	ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
	}
	};
	}

	unlink $CAkey;
	unlink $CAcert;
	unlink $CAserial;
	unlink $CAreq;
	unlink $CAreq2;

	unlink $Ukey;
	unlink $Ureq;
	unlink $Ucert;
	unlink basename($Ucert, '.ss').'.srl';

	unlink $Dkey;
	unlink $Dreq;
	unlink $Dcert;

	unlink $Ekey;
	unlink $Ereq;
	unlink $Ecert;

	unlink $P1key;
	unlink $P1req;
	unlink $P1cert;
	unlink basename($P1cert, '.ss').'.srl';
	unlink $P1intermediate;
	unlink "intP1.ss";

	unlink $P2key;
	unlink $P2req;
	unlink $P2cert;
	unlink $P2intermediate;
	unlink "intP2.ss";

	unlink "ecp.ss";
	unlink "err.ss";

	unlink $server_sess;
	unlink $client_sess;