| /* |
| * The PCI Utilities -- Show Capabilities |
| * |
| * Copyright (c) 1997--2018 Martin Mares <[email protected]> |
| * |
| * Can be freely distributed and used under the terms of the GNU GPL v2+. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <stdlib.h> |
| |
| #include "lspci.h" |
| |
| static void |
| cap_pm(struct device *d, int where, int cap) |
| { |
| int t, b; |
| static int pm_aux_current[8] = { 0, 55, 100, 160, 220, 270, 320, 375 }; |
| |
| printf("Power Management version %d\n", cap & PCI_PM_CAP_VER_MASK); |
| if (verbose < 2) |
| return; |
| printf("\t\tFlags: PMEClk%c DSI%c D1%c D2%c AuxCurrent=%dmA PME(D0%c,D1%c,D2%c,D3hot%c,D3cold%c)\n", |
| FLAG(cap, PCI_PM_CAP_PME_CLOCK), |
| FLAG(cap, PCI_PM_CAP_DSI), |
| FLAG(cap, PCI_PM_CAP_D1), |
| FLAG(cap, PCI_PM_CAP_D2), |
| pm_aux_current[(cap & PCI_PM_CAP_AUX_C_MASK) >> 6], |
| FLAG(cap, PCI_PM_CAP_PME_D0), |
| FLAG(cap, PCI_PM_CAP_PME_D1), |
| FLAG(cap, PCI_PM_CAP_PME_D2), |
| FLAG(cap, PCI_PM_CAP_PME_D3_HOT), |
| FLAG(cap, PCI_PM_CAP_PME_D3_COLD)); |
| if (!config_fetch(d, where + PCI_PM_CTRL, PCI_PM_SIZEOF - PCI_PM_CTRL)) |
| return; |
| t = get_conf_word(d, where + PCI_PM_CTRL); |
| printf("\t\tStatus: D%d NoSoftRst%c PME-Enable%c DSel=%d DScale=%d PME%c\n", |
| t & PCI_PM_CTRL_STATE_MASK, |
| FLAG(t, PCI_PM_CTRL_NO_SOFT_RST), |
| FLAG(t, PCI_PM_CTRL_PME_ENABLE), |
| (t & PCI_PM_CTRL_DATA_SEL_MASK) >> 9, |
| (t & PCI_PM_CTRL_DATA_SCALE_MASK) >> 13, |
| FLAG(t, PCI_PM_CTRL_PME_STATUS)); |
| b = get_conf_byte(d, where + PCI_PM_PPB_EXTENSIONS); |
| if (b) |
| printf("\t\tBridge: PM%c B3%c\n", |
| FLAG(b, PCI_PM_BPCC_ENABLE), |
| FLAG(~b, PCI_PM_PPB_B2_B3)); |
| } |
| |
| static void |
| format_agp_rate(int rate, char *buf, int agp3) |
| { |
| char *c = buf; |
| int i; |
| |
| for (i=0; i<=2; i++) |
| if (rate & (1 << i)) |
| { |
| if (c != buf) |
| *c++ = ','; |
| c += sprintf(c, "x%d", 1 << (i + 2*agp3)); |
| } |
| if (c != buf) |
| *c = 0; |
| else |
| strcpy(buf, "<none>"); |
| } |
| |
| static void |
| cap_agp(struct device *d, int where, int cap) |
| { |
| u32 t; |
| char rate[16]; |
| int ver, rev; |
| int agp3 = 0; |
| |
| ver = (cap >> 4) & 0x0f; |
| rev = cap & 0x0f; |
| printf("AGP version %x.%x\n", ver, rev); |
| if (verbose < 2) |
| return; |
| if (!config_fetch(d, where + PCI_AGP_STATUS, PCI_AGP_SIZEOF - PCI_AGP_STATUS)) |
| return; |
| t = get_conf_long(d, where + PCI_AGP_STATUS); |
| if (ver >= 3 && (t & PCI_AGP_STATUS_AGP3)) |
| agp3 = 1; |
| format_agp_rate(t & 7, rate, agp3); |
| printf("\t\tStatus: RQ=%d Iso%c ArqSz=%d Cal=%d SBA%c ITACoh%c GART64%c HTrans%c 64bit%c FW%c AGP3%c Rate=%s\n", |
| ((t & PCI_AGP_STATUS_RQ_MASK) >> 24U) + 1, |
| FLAG(t, PCI_AGP_STATUS_ISOCH), |
| ((t & PCI_AGP_STATUS_ARQSZ_MASK) >> 13), |
| ((t & PCI_AGP_STATUS_CAL_MASK) >> 10), |
| FLAG(t, PCI_AGP_STATUS_SBA), |
| FLAG(t, PCI_AGP_STATUS_ITA_COH), |
| FLAG(t, PCI_AGP_STATUS_GART64), |
| FLAG(t, PCI_AGP_STATUS_HTRANS), |
| FLAG(t, PCI_AGP_STATUS_64BIT), |
| FLAG(t, PCI_AGP_STATUS_FW), |
| FLAG(t, PCI_AGP_STATUS_AGP3), |
| rate); |
| t = get_conf_long(d, where + PCI_AGP_COMMAND); |
| format_agp_rate(t & 7, rate, agp3); |
| printf("\t\tCommand: RQ=%d ArqSz=%d Cal=%d SBA%c AGP%c GART64%c 64bit%c FW%c Rate=%s\n", |
| ((t & PCI_AGP_COMMAND_RQ_MASK) >> 24U) + 1, |
| ((t & PCI_AGP_COMMAND_ARQSZ_MASK) >> 13), |
| ((t & PCI_AGP_COMMAND_CAL_MASK) >> 10), |
| FLAG(t, PCI_AGP_COMMAND_SBA), |
| FLAG(t, PCI_AGP_COMMAND_AGP), |
| FLAG(t, PCI_AGP_COMMAND_GART64), |
| FLAG(t, PCI_AGP_COMMAND_64BIT), |
| FLAG(t, PCI_AGP_COMMAND_FW), |
| rate); |
| } |
| |
| static void |
| cap_pcix_nobridge(struct device *d, int where) |
| { |
| u16 command; |
| u32 status; |
| static const byte max_outstanding[8] = { 1, 2, 3, 4, 8, 12, 16, 32 }; |
| |
| printf("PCI-X non-bridge device\n"); |
| |
| if (verbose < 2) |
| return; |
| |
| if (!config_fetch(d, where + PCI_PCIX_STATUS, 4)) |
| return; |
| |
| command = get_conf_word(d, where + PCI_PCIX_COMMAND); |
| status = get_conf_long(d, where + PCI_PCIX_STATUS); |
| printf("\t\tCommand: DPERE%c ERO%c RBC=%d OST=%d\n", |
| FLAG(command, PCI_PCIX_COMMAND_DPERE), |
| FLAG(command, PCI_PCIX_COMMAND_ERO), |
| 1 << (9 + ((command & PCI_PCIX_COMMAND_MAX_MEM_READ_BYTE_COUNT) >> 2U)), |
| max_outstanding[(command & PCI_PCIX_COMMAND_MAX_OUTSTANDING_SPLIT_TRANS) >> 4U]); |
| printf("\t\tStatus: Dev=%02x:%02x.%d 64bit%c 133MHz%c SCD%c USC%c DC=%s DMMRBC=%u DMOST=%u DMCRS=%u RSCEM%c 266MHz%c 533MHz%c\n", |
| (status & PCI_PCIX_STATUS_BUS) >> 8, |
| (status & PCI_PCIX_STATUS_DEVICE) >> 3, |
| (status & PCI_PCIX_STATUS_FUNCTION), |
| FLAG(status, PCI_PCIX_STATUS_64BIT), |
| FLAG(status, PCI_PCIX_STATUS_133MHZ), |
| FLAG(status, PCI_PCIX_STATUS_SC_DISCARDED), |
| FLAG(status, PCI_PCIX_STATUS_UNEXPECTED_SC), |
| ((status & PCI_PCIX_STATUS_DEVICE_COMPLEXITY) ? "bridge" : "simple"), |
| 1 << (9 + ((status & PCI_PCIX_STATUS_DESIGNED_MAX_MEM_READ_BYTE_COUNT) >> 21)), |
| max_outstanding[(status & PCI_PCIX_STATUS_DESIGNED_MAX_OUTSTANDING_SPLIT_TRANS) >> 23], |
| 1 << (3 + ((status & PCI_PCIX_STATUS_DESIGNED_MAX_CUMULATIVE_READ_SIZE) >> 26)), |
| FLAG(status, PCI_PCIX_STATUS_RCVD_SC_ERR_MESS), |
| FLAG(status, PCI_PCIX_STATUS_266MHZ), |
| FLAG(status, PCI_PCIX_STATUS_533MHZ)); |
| } |
| |
| static void |
| cap_pcix_bridge(struct device *d, int where) |
| { |
| static const char * const sec_clock_freq[8] = { "conv", "66MHz", "100MHz", "133MHz", "?4", "?5", "?6", "?7" }; |
| u16 secstatus; |
| u32 status, upstcr, downstcr; |
| |
| printf("PCI-X bridge device\n"); |
| |
| if (verbose < 2) |
| return; |
| |
| if (!config_fetch(d, where + PCI_PCIX_BRIDGE_STATUS, 12)) |
| return; |
| |
| secstatus = get_conf_word(d, where + PCI_PCIX_BRIDGE_SEC_STATUS); |
| printf("\t\tSecondary Status: 64bit%c 133MHz%c SCD%c USC%c SCO%c SRD%c Freq=%s\n", |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_64BIT), |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_133MHZ), |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_SC_DISCARDED), |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_UNEXPECTED_SC), |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_SC_OVERRUN), |
| FLAG(secstatus, PCI_PCIX_BRIDGE_SEC_STATUS_SPLIT_REQUEST_DELAYED), |
| sec_clock_freq[(secstatus & PCI_PCIX_BRIDGE_SEC_STATUS_CLOCK_FREQ) >> 6]); |
| status = get_conf_long(d, where + PCI_PCIX_BRIDGE_STATUS); |
| printf("\t\tStatus: Dev=%02x:%02x.%d 64bit%c 133MHz%c SCD%c USC%c SCO%c SRD%c\n", |
| (status & PCI_PCIX_BRIDGE_STATUS_BUS) >> 8, |
| (status & PCI_PCIX_BRIDGE_STATUS_DEVICE) >> 3, |
| (status & PCI_PCIX_BRIDGE_STATUS_FUNCTION), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_64BIT), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_133MHZ), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_SC_DISCARDED), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_UNEXPECTED_SC), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_SC_OVERRUN), |
| FLAG(status, PCI_PCIX_BRIDGE_STATUS_SPLIT_REQUEST_DELAYED)); |
| upstcr = get_conf_long(d, where + PCI_PCIX_BRIDGE_UPSTREAM_SPLIT_TRANS_CTRL); |
| printf("\t\tUpstream: Capacity=%u CommitmentLimit=%u\n", |
| (upstcr & PCI_PCIX_BRIDGE_STR_CAPACITY), |
| (upstcr >> 16) & 0xffff); |
| downstcr = get_conf_long(d, where + PCI_PCIX_BRIDGE_DOWNSTREAM_SPLIT_TRANS_CTRL); |
| printf("\t\tDownstream: Capacity=%u CommitmentLimit=%u\n", |
| (downstcr & PCI_PCIX_BRIDGE_STR_CAPACITY), |
| (downstcr >> 16) & 0xffff); |
| } |
| |
| static void |
| cap_pcix(struct device *d, int where) |
| { |
| switch (get_conf_byte(d, PCI_HEADER_TYPE) & 0x7f) |
| { |
| case PCI_HEADER_TYPE_NORMAL: |
| cap_pcix_nobridge(d, where); |
| break; |
| case PCI_HEADER_TYPE_BRIDGE: |
| cap_pcix_bridge(d, where); |
| break; |
| } |
| } |
| |
| static inline char * |
| ht_link_width(unsigned width) |
| { |
| static char * const widths[8] = { "8bit", "16bit", "[2]", "32bit", "2bit", "4bit", "[6]", "N/C" }; |
| return widths[width]; |
| } |
| |
| static inline char * |
| ht_link_freq(unsigned freq) |
| { |
| static char * const freqs[16] = { "200MHz", "300MHz", "400MHz", "500MHz", "600MHz", "800MHz", "1.0GHz", "1.2GHz", |
| "1.4GHz", "1.6GHz", "[a]", "[b]", "[c]", "[d]", "[e]", "Vend" }; |
| return freqs[freq]; |
| } |
| |
| static void |
| cap_ht_pri(struct device *d, int where, int cmd) |
| { |
| u16 lctr0, lcnf0, lctr1, lcnf1, eh; |
| u8 rid, lfrer0, lfcap0, ftr, lfrer1, lfcap1, mbu, mlu, bn; |
| |
| printf("HyperTransport: Slave or Primary Interface\n"); |
| if (verbose < 2) |
| return; |
| |
| if (!config_fetch(d, where + PCI_HT_PRI_LCTR0, PCI_HT_PRI_SIZEOF - PCI_HT_PRI_LCTR0)) |
| return; |
| rid = get_conf_byte(d, where + PCI_HT_PRI_RID); |
| if (rid < 0x22 && rid > 0x11) |
| printf("\t\t!!! Possibly incomplete decoding\n"); |
| |
| printf("\t\tCommand: BaseUnitID=%u UnitCnt=%u MastHost%c DefDir%c", |
| (cmd & PCI_HT_PRI_CMD_BUID), |
| (cmd & PCI_HT_PRI_CMD_UC) >> 5, |
| FLAG(cmd, PCI_HT_PRI_CMD_MH), |
| FLAG(cmd, PCI_HT_PRI_CMD_DD)); |
| if (rid >= 0x22) |
| printf(" DUL%c", FLAG(cmd, PCI_HT_PRI_CMD_DUL)); |
| printf("\n"); |
| |
| lctr0 = get_conf_word(d, where + PCI_HT_PRI_LCTR0); |
| printf("\t\tLink Control 0: CFlE%c CST%c CFE%c <LkFail%c Init%c EOC%c TXO%c <CRCErr=%x", |
| FLAG(lctr0, PCI_HT_LCTR_CFLE), |
| FLAG(lctr0, PCI_HT_LCTR_CST), |
| FLAG(lctr0, PCI_HT_LCTR_CFE), |
| FLAG(lctr0, PCI_HT_LCTR_LKFAIL), |
| FLAG(lctr0, PCI_HT_LCTR_INIT), |
| FLAG(lctr0, PCI_HT_LCTR_EOC), |
| FLAG(lctr0, PCI_HT_LCTR_TXO), |
| (lctr0 & PCI_HT_LCTR_CRCERR) >> 8); |
| if (rid >= 0x22) |
| printf(" IsocEn%c LSEn%c ExtCTL%c 64b%c", |
| FLAG(lctr0, PCI_HT_LCTR_ISOCEN), |
| FLAG(lctr0, PCI_HT_LCTR_LSEN), |
| FLAG(lctr0, PCI_HT_LCTR_EXTCTL), |
| FLAG(lctr0, PCI_HT_LCTR_64B)); |
| printf("\n"); |
| |
| lcnf0 = get_conf_word(d, where + PCI_HT_PRI_LCNF0); |
| if (rid < 0x22) |
| printf("\t\tLink Config 0: MLWI=%s MLWO=%s LWI=%s LWO=%s\n", |
| ht_link_width(lcnf0 & PCI_HT_LCNF_MLWI), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_MLWO) >> 4), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_LWI) >> 8), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_LWO) >> 12)); |
| else |
| printf("\t\tLink Config 0: MLWI=%s DwFcIn%c MLWO=%s DwFcOut%c LWI=%s DwFcInEn%c LWO=%s DwFcOutEn%c\n", |
| ht_link_width(lcnf0 & PCI_HT_LCNF_MLWI), |
| FLAG(lcnf0, PCI_HT_LCNF_DFI), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_MLWO) >> 4), |
| FLAG(lcnf0, PCI_HT_LCNF_DFO), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_LWI) >> 8), |
| FLAG(lcnf0, PCI_HT_LCNF_DFIE), |
| ht_link_width((lcnf0 & PCI_HT_LCNF_LWO) >> 12), |
| FLAG(lcnf0, PCI_HT_LCNF_DFOE)); |
| |
| lctr1 = get_conf_word(d, where + PCI_HT_PRI_LCTR1); |
| printf("\t\tLink Control 1: CFlE%c CST%c CFE%c <LkFail%c Init%c EOC%c TXO%c <CRCErr=%x", |
| FLAG(lctr1, PCI_HT_LCTR_CFLE), |
| FLAG(lctr1, PCI_HT_LCTR_CST), |
| FLAG(lctr1, PCI_HT_LCTR_CFE), |
| FLAG(lctr1, PCI_HT_LCTR_LKFAIL), |
| FLAG(lctr1, PCI_HT_LCTR_INIT), |
| FLAG(lctr1, PCI_HT_LCTR_EOC), |
| FLAG(lctr1, PCI_HT_LCTR_TXO), |
| (lctr1 & PCI_HT_LCTR_CRCERR) >> 8); |
| if (rid >= 0x22) |
| printf(" IsocEn%c LSEn%c ExtCTL%c 64b%c", |
| FLAG(lctr1, PCI_HT_LCTR_ISOCEN), |
| FLAG(lctr1, PCI_HT_LCTR_LSEN), |
| FLAG(lctr1, PCI_HT_LCTR_EXTCTL), |
| FLAG(lctr1, PCI_HT_LCTR_64B)); |
| printf("\n"); |
| |
| lcnf1 = get_conf_word(d, where + PCI_HT_PRI_LCNF1); |
| if (rid < 0x22) |
| printf("\t\tLink Config 1: MLWI=%s MLWO=%s LWI=%s LWO=%s\n", |
| ht_link_width(lcnf1 & PCI_HT_LCNF_MLWI), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_MLWO) >> 4), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_LWI) >> 8), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_LWO) >> 12)); |
| else |
| printf("\t\tLink Config 1: MLWI=%s DwFcIn%c MLWO=%s DwFcOut%c LWI=%s DwFcInEn%c LWO=%s DwFcOutEn%c\n", |
| ht_link_width(lcnf1 & PCI_HT_LCNF_MLWI), |
| FLAG(lcnf1, PCI_HT_LCNF_DFI), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_MLWO) >> 4), |
| FLAG(lcnf1, PCI_HT_LCNF_DFO), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_LWI) >> 8), |
| FLAG(lcnf1, PCI_HT_LCNF_DFIE), |
| ht_link_width((lcnf1 & PCI_HT_LCNF_LWO) >> 12), |
| FLAG(lcnf1, PCI_HT_LCNF_DFOE)); |
| |
| printf("\t\tRevision ID: %u.%02u\n", |
| (rid & PCI_HT_RID_MAJ) >> 5, (rid & PCI_HT_RID_MIN)); |
| if (rid < 0x22) |
| return; |
| |
| lfrer0 = get_conf_byte(d, where + PCI_HT_PRI_LFRER0); |
| printf("\t\tLink Frequency 0: %s\n", ht_link_freq(lfrer0 & PCI_HT_LFRER_FREQ)); |
| printf("\t\tLink Error 0: <Prot%c <Ovfl%c <EOC%c CTLTm%c\n", |
| FLAG(lfrer0, PCI_HT_LFRER_PROT), |
| FLAG(lfrer0, PCI_HT_LFRER_OV), |
| FLAG(lfrer0, PCI_HT_LFRER_EOC), |
| FLAG(lfrer0, PCI_HT_LFRER_CTLT)); |
| |
| lfcap0 = get_conf_byte(d, where + PCI_HT_PRI_LFCAP0); |
| printf("\t\tLink Frequency Capability 0: 200MHz%c 300MHz%c 400MHz%c 500MHz%c 600MHz%c 800MHz%c 1.0GHz%c 1.2GHz%c 1.4GHz%c 1.6GHz%c Vend%c\n", |
| FLAG(lfcap0, PCI_HT_LFCAP_200), |
| FLAG(lfcap0, PCI_HT_LFCAP_300), |
| FLAG(lfcap0, PCI_HT_LFCAP_400), |
| FLAG(lfcap0, PCI_HT_LFCAP_500), |
| FLAG(lfcap0, PCI_HT_LFCAP_600), |
| FLAG(lfcap0, PCI_HT_LFCAP_800), |
| FLAG(lfcap0, PCI_HT_LFCAP_1000), |
| FLAG(lfcap0, PCI_HT_LFCAP_1200), |
| FLAG(lfcap0, PCI_HT_LFCAP_1400), |
| FLAG(lfcap0, PCI_HT_LFCAP_1600), |
| FLAG(lfcap0, PCI_HT_LFCAP_VEND)); |
| |
| ftr = get_conf_byte(d, where + PCI_HT_PRI_FTR); |
| printf("\t\tFeature Capability: IsocFC%c LDTSTOP%c CRCTM%c ECTLT%c 64bA%c UIDRD%c\n", |
| FLAG(ftr, PCI_HT_FTR_ISOCFC), |
| FLAG(ftr, PCI_HT_FTR_LDTSTOP), |
| FLAG(ftr, PCI_HT_FTR_CRCTM), |
| FLAG(ftr, PCI_HT_FTR_ECTLT), |
| FLAG(ftr, PCI_HT_FTR_64BA), |
| FLAG(ftr, PCI_HT_FTR_UIDRD)); |
| |
| lfrer1 = get_conf_byte(d, where + PCI_HT_PRI_LFRER1); |
| printf("\t\tLink Frequency 1: %s\n", ht_link_freq(lfrer1 & PCI_HT_LFRER_FREQ)); |
| printf("\t\tLink Error 1: <Prot%c <Ovfl%c <EOC%c CTLTm%c\n", |
| FLAG(lfrer1, PCI_HT_LFRER_PROT), |
| FLAG(lfrer1, PCI_HT_LFRER_OV), |
| FLAG(lfrer1, PCI_HT_LFRER_EOC), |
| FLAG(lfrer1, PCI_HT_LFRER_CTLT)); |
| |
| lfcap1 = get_conf_byte(d, where + PCI_HT_PRI_LFCAP1); |
| printf("\t\tLink Frequency Capability 1: 200MHz%c 300MHz%c 400MHz%c 500MHz%c 600MHz%c 800MHz%c 1.0GHz%c 1.2GHz%c 1.4GHz%c 1.6GHz%c Vend%c\n", |
| FLAG(lfcap1, PCI_HT_LFCAP_200), |
| FLAG(lfcap1, PCI_HT_LFCAP_300), |
| FLAG(lfcap1, PCI_HT_LFCAP_400), |
| FLAG(lfcap1, PCI_HT_LFCAP_500), |
| FLAG(lfcap1, PCI_HT_LFCAP_600), |
| FLAG(lfcap1, PCI_HT_LFCAP_800), |
| FLAG(lfcap1, PCI_HT_LFCAP_1000), |
| FLAG(lfcap1, PCI_HT_LFCAP_1200), |
| FLAG(lfcap1, PCI_HT_LFCAP_1400), |
| FLAG(lfcap1, PCI_HT_LFCAP_1600), |
| FLAG(lfcap1, PCI_HT_LFCAP_VEND)); |
| |
| eh = get_conf_word(d, where + PCI_HT_PRI_EH); |
| printf("\t\tError Handling: PFlE%c OFlE%c PFE%c OFE%c EOCFE%c RFE%c CRCFE%c SERRFE%c CF%c RE%c PNFE%c ONFE%c EOCNFE%c RNFE%c CRCNFE%c SERRNFE%c\n", |
| FLAG(eh, PCI_HT_EH_PFLE), |
| FLAG(eh, PCI_HT_EH_OFLE), |
| FLAG(eh, PCI_HT_EH_PFE), |
| FLAG(eh, PCI_HT_EH_OFE), |
| FLAG(eh, PCI_HT_EH_EOCFE), |
| FLAG(eh, PCI_HT_EH_RFE), |
| FLAG(eh, PCI_HT_EH_CRCFE), |
| FLAG(eh, PCI_HT_EH_SERRFE), |
| FLAG(eh, PCI_HT_EH_CF), |
| FLAG(eh, PCI_HT_EH_RE), |
| FLAG(eh, PCI_HT_EH_PNFE), |
| FLAG(eh, PCI_HT_EH_ONFE), |
| FLAG(eh, PCI_HT_EH_EOCNFE), |
| FLAG(eh, PCI_HT_EH_RNFE), |
| FLAG(eh, PCI_HT_EH_CRCNFE), |
| FLAG(eh, PCI_HT_EH_SERRNFE)); |
| |
| mbu = get_conf_byte(d, where + PCI_HT_PRI_MBU); |
| mlu = get_conf_byte(d, where + PCI_HT_PRI_MLU); |
| printf("\t\tPrefetchable memory behind bridge Upper: %02x-%02x\n", mbu, mlu); |
| |
| bn = get_conf_byte(d, where + PCI_HT_PRI_BN); |
| printf("\t\tBus Number: %02x\n", bn); |
| } |
| |
| static void |
| cap_ht_sec(struct device *d, int where, int cmd) |
| { |
| u16 lctr, lcnf, ftr, eh; |
| u8 rid, lfrer, lfcap, mbu, mlu; |
| char *fmt; |
| |
| printf("HyperTransport: Host or Secondary Interface\n"); |
| if (verbose < 2) |
| return; |
| |
| if (!config_fetch(d, where + PCI_HT_SEC_LCTR, PCI_HT_SEC_SIZEOF - PCI_HT_SEC_LCTR)) |
| return; |
| rid = get_conf_byte(d, where + PCI_HT_SEC_RID); |
| if (rid < 0x22 && rid > 0x11) |
| printf("\t\t!!! Possibly incomplete decoding\n"); |
| |
| if (rid >= 0x22) |
| fmt = "\t\tCommand: WarmRst%c DblEnd%c DevNum=%u ChainSide%c HostHide%c Slave%c <EOCErr%c DUL%c\n"; |
| else |
| fmt = "\t\tCommand: WarmRst%c DblEnd%c\n"; |
| printf(fmt, |
| FLAG(cmd, PCI_HT_SEC_CMD_WR), |
| FLAG(cmd, PCI_HT_SEC_CMD_DE), |
| (cmd & PCI_HT_SEC_CMD_DN) >> 2, |
| FLAG(cmd, PCI_HT_SEC_CMD_CS), |
| FLAG(cmd, PCI_HT_SEC_CMD_HH), |
| FLAG(cmd, PCI_HT_SEC_CMD_AS), |
| FLAG(cmd, PCI_HT_SEC_CMD_HIECE), |
| FLAG(cmd, PCI_HT_SEC_CMD_DUL)); |
| lctr = get_conf_word(d, where + PCI_HT_SEC_LCTR); |
| if (rid >= 0x22) |
| fmt = "\t\tLink Control: CFlE%c CST%c CFE%c <LkFail%c Init%c EOC%c TXO%c <CRCErr=%x IsocEn%c LSEn%c ExtCTL%c 64b%c\n"; |
| else |
| fmt = "\t\tLink Control: CFlE%c CST%c CFE%c <LkFail%c Init%c EOC%c TXO%c <CRCErr=%x\n"; |
| printf(fmt, |
| FLAG(lctr, PCI_HT_LCTR_CFLE), |
| FLAG(lctr, PCI_HT_LCTR_CST), |
| FLAG(lctr, PCI_HT_LCTR_CFE), |
| FLAG(lctr, PCI_HT_LCTR_LKFAIL), |
| FLAG(lctr, PCI_HT_LCTR_INIT), |
| FLAG(lctr, PCI_HT_LCTR_EOC), |
| FLAG(lctr, PCI_HT_LCTR_TXO), |
| (lctr & PCI_HT_LCTR_CRCERR) >> 8, |
| FLAG(lctr, PCI_HT_LCTR_ISOCEN), |
| FLAG(lctr, PCI_HT_LCTR_LSEN), |
| FLAG(lctr, PCI_HT_LCTR_EXTCTL), |
| FLAG(lctr, PCI_HT_LCTR_64B)); |
| lcnf = get_conf_word(d, where + PCI_HT_SEC_LCNF); |
| if (rid >= 0x22) |
| fmt = "\t\tLink Config: MLWI=%1$s DwFcIn%5$c MLWO=%2$s DwFcOut%6$c LWI=%3$s DwFcInEn%7$c LWO=%4$s DwFcOutEn%8$c\n"; |
| else |
| fmt = "\t\tLink Config: MLWI=%s MLWO=%s LWI=%s LWO=%s\n"; |
| printf(fmt, |
| ht_link_width(lcnf & PCI_HT_LCNF_MLWI), |
| ht_link_width((lcnf & PCI_HT_LCNF_MLWO) >> 4), |
| ht_link_width((lcnf & PCI_HT_LCNF_LWI) >> 8), |
| ht_link_width((lcnf & PCI_HT_LCNF_LWO) >> 12), |
| FLAG(lcnf, PCI_HT_LCNF_DFI), |
| FLAG(lcnf, PCI_HT_LCNF_DFO), |
| FLAG(lcnf, PCI_HT_LCNF_DFIE), |
| FLAG(lcnf, PCI_HT_LCNF_DFOE)); |
| printf("\t\tRevision ID: %u.%02u\n", |
| (rid & PCI_HT_RID_MAJ) >> 5, (rid & PCI_HT_RID_MIN)); |
| if (rid < 0x22) |
| return; |
| lfrer = get_conf_byte(d, where + PCI_HT_SEC_LFRER); |
| printf("\t\tLink Frequency: %s\n", ht_link_freq(lfrer & PCI_HT_LFRER_FREQ)); |
| printf("\t\tLink Error: <Prot%c <Ovfl%c <EOC%c CTLTm%c\n", |
| FLAG(lfrer, PCI_HT_LFRER_PROT), |
| FLAG(lfrer, PCI_HT_LFRER_OV), |
| FLAG(lfrer, PCI_HT_LFRER_EOC), |
| FLAG(lfrer, PCI_HT_LFRER_CTLT)); |
| lfcap = get_conf_byte(d, where + PCI_HT_SEC_LFCAP); |
| printf("\t\tLink Frequency Capability: 200MHz%c 300MHz%c 400MHz%c 500MHz%c 600MHz%c 800MHz%c 1.0GHz%c 1.2GHz%c 1.4GHz%c 1.6GHz%c Vend%c\n", |
| FLAG(lfcap, PCI_HT_LFCAP_200), |
| FLAG(lfcap, PCI_HT_LFCAP_300), |
| FLAG(lfcap, PCI_HT_LFCAP_400), |
| FLAG(lfcap, PCI_HT_LFCAP_500), |
| FLAG(lfcap, PCI_HT_LFCAP_600), |
| FLAG(lfcap, PCI_HT_LFCAP_800), |
| FLAG(lfcap, PCI_HT_LFCAP_1000), |
| FLAG(lfcap, PCI_HT_LFCAP_1200), |
| FLAG(lfcap, PCI_HT_LFCAP_1400), |
| FLAG(lfcap, PCI_HT_LFCAP_1600), |
| FLAG(lfcap, PCI_HT_LFCAP_VEND)); |
| ftr = get_conf_word(d, where + PCI_HT_SEC_FTR); |
| printf("\t\tFeature Capability: IsocFC%c LDTSTOP%c CRCTM%c ECTLT%c 64bA%c UIDRD%c ExtRS%c UCnfE%c\n", |
| FLAG(ftr, PCI_HT_FTR_ISOCFC), |
| FLAG(ftr, PCI_HT_FTR_LDTSTOP), |
| FLAG(ftr, PCI_HT_FTR_CRCTM), |
| FLAG(ftr, PCI_HT_FTR_ECTLT), |
| FLAG(ftr, PCI_HT_FTR_64BA), |
| FLAG(ftr, PCI_HT_FTR_UIDRD), |
| FLAG(ftr, PCI_HT_SEC_FTR_EXTRS), |
| FLAG(ftr, PCI_HT_SEC_FTR_UCNFE)); |
| if (ftr & PCI_HT_SEC_FTR_EXTRS) |
| { |
| eh = get_conf_word(d, where + PCI_HT_SEC_EH); |
| printf("\t\tError Handling: PFlE%c OFlE%c PFE%c OFE%c EOCFE%c RFE%c CRCFE%c SERRFE%c CF%c RE%c PNFE%c ONFE%c EOCNFE%c RNFE%c CRCNFE%c SERRNFE%c\n", |
| FLAG(eh, PCI_HT_EH_PFLE), |
| FLAG(eh, PCI_HT_EH_OFLE), |
| FLAG(eh, PCI_HT_EH_PFE), |
| FLAG(eh, PCI_HT_EH_OFE), |
| FLAG(eh, PCI_HT_EH_EOCFE), |
| FLAG(eh, PCI_HT_EH_RFE), |
| FLAG(eh, PCI_HT_EH_CRCFE), |
| FLAG(eh, PCI_HT_EH_SERRFE), |
| FLAG(eh, PCI_HT_EH_CF), |
| FLAG(eh, PCI_HT_EH_RE), |
| FLAG(eh, PCI_HT_EH_PNFE), |
| FLAG(eh, PCI_HT_EH_ONFE), |
| FLAG(eh, PCI_HT_EH_EOCNFE), |
| FLAG(eh, PCI_HT_EH_RNFE), |
| FLAG(eh, PCI_HT_EH_CRCNFE), |
| FLAG(eh, PCI_HT_EH_SERRNFE)); |
| mbu = get_conf_byte(d, where + PCI_HT_SEC_MBU); |
| mlu = get_conf_byte(d, where + PCI_HT_SEC_MLU); |
| printf("\t\tPrefetchable memory behind bridge Upper: %02x-%02x\n", mbu, mlu); |
| } |
| } |
| |
| static void |
| cap_ht(struct device *d, int where, int cmd) |
| { |
| int type; |
| |
| switch (cmd & PCI_HT_CMD_TYP_HI) |
| { |
| case PCI_HT_CMD_TYP_HI_PRI: |
| cap_ht_pri(d, where, cmd); |
| return; |
| case PCI_HT_CMD_TYP_HI_SEC: |
| cap_ht_sec(d, where, cmd); |
| return; |
| } |
| |
| type = cmd & PCI_HT_CMD_TYP; |
| switch (type) |
| { |
| case PCI_HT_CMD_TYP_SW: |
| printf("HyperTransport: Switch\n"); |
| break; |
| case PCI_HT_CMD_TYP_IDC: |
| printf("HyperTransport: Interrupt Discovery and Configuration\n"); |
| break; |
| case PCI_HT_CMD_TYP_RID: |
| printf("HyperTransport: Revision ID: %u.%02u\n", |
| (cmd & PCI_HT_RID_MAJ) >> 5, (cmd & PCI_HT_RID_MIN)); |
| break; |
| case PCI_HT_CMD_TYP_UIDC: |
| printf("HyperTransport: UnitID Clumping\n"); |
| break; |
| case PCI_HT_CMD_TYP_ECSA: |
| printf("HyperTransport: Extended Configuration Space Access\n"); |
| break; |
| case PCI_HT_CMD_TYP_AM: |
| printf("HyperTransport: Address Mapping\n"); |
| break; |
| case PCI_HT_CMD_TYP_MSIM: |
| printf("HyperTransport: MSI Mapping Enable%c Fixed%c\n", |
| FLAG(cmd, PCI_HT_MSIM_CMD_EN), |
| FLAG(cmd, PCI_HT_MSIM_CMD_FIXD)); |
| if (verbose >= 2 && !(cmd & PCI_HT_MSIM_CMD_FIXD)) |
| { |
| u32 offl, offh; |
| if (!config_fetch(d, where + PCI_HT_MSIM_ADDR_LO, 8)) |
| break; |
| offl = get_conf_long(d, where + PCI_HT_MSIM_ADDR_LO); |
| offh = get_conf_long(d, where + PCI_HT_MSIM_ADDR_HI); |
| printf("\t\tMapping Address Base: %016" PCI_U64_FMT_X "\n", ((u64)offh << 32) | (offl & ~0xfffff)); |
| } |
| break; |
| case PCI_HT_CMD_TYP_DR: |
| printf("HyperTransport: DirectRoute\n"); |
| break; |
| case PCI_HT_CMD_TYP_VCS: |
| printf("HyperTransport: VCSet\n"); |
| break; |
| case PCI_HT_CMD_TYP_RM: |
| printf("HyperTransport: Retry Mode\n"); |
| break; |
| case PCI_HT_CMD_TYP_X86: |
| printf("HyperTransport: X86 (reserved)\n"); |
| break; |
| default: |
| printf("HyperTransport: #%02x\n", type >> 11); |
| } |
| } |
| |
| static void |
| cap_msi(struct device *d, int where, int cap) |
| { |
| int is64; |
| u32 t; |
| u16 w; |
| |
| printf("MSI: Enable%c Count=%d/%d Maskable%c 64bit%c\n", |
| FLAG(cap, PCI_MSI_FLAGS_ENABLE), |
| 1 << ((cap & PCI_MSI_FLAGS_QSIZE) >> 4), |
| 1 << ((cap & PCI_MSI_FLAGS_QMASK) >> 1), |
| FLAG(cap, PCI_MSI_FLAGS_MASK_BIT), |
| FLAG(cap, PCI_MSI_FLAGS_64BIT)); |
| if (verbose < 2) |
| return; |
| is64 = cap & PCI_MSI_FLAGS_64BIT; |
| if (!config_fetch(d, where + PCI_MSI_ADDRESS_LO, (is64 ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32) + 2 - PCI_MSI_ADDRESS_LO)) |
| return; |
| printf("\t\tAddress: "); |
| if (is64) |
| { |
| t = get_conf_long(d, where + PCI_MSI_ADDRESS_HI); |
| w = get_conf_word(d, where + PCI_MSI_DATA_64); |
| printf("%08x", t); |
| } |
| else |
| w = get_conf_word(d, where + PCI_MSI_DATA_32); |
| t = get_conf_long(d, where + PCI_MSI_ADDRESS_LO); |
| printf("%08x Data: %04x\n", t, w); |
| if (cap & PCI_MSI_FLAGS_MASK_BIT) |
| { |
| u32 mask, pending; |
| |
| if (is64) |
| { |
| if (!config_fetch(d, where + PCI_MSI_MASK_BIT_64, 8)) |
| return; |
| mask = get_conf_long(d, where + PCI_MSI_MASK_BIT_64); |
| pending = get_conf_long(d, where + PCI_MSI_PENDING_64); |
| } |
| else |
| { |
| if (!config_fetch(d, where + PCI_MSI_MASK_BIT_32, 8)) |
| return; |
| mask = get_conf_long(d, where + PCI_MSI_MASK_BIT_32); |
| pending = get_conf_long(d, where + PCI_MSI_PENDING_32); |
| } |
| printf("\t\tMasking: %08x Pending: %08x\n", mask, pending); |
| } |
| } |
| |
| static int exp_downstream_port(int type) |
| { |
| return type == PCI_EXP_TYPE_ROOT_PORT || |
| type == PCI_EXP_TYPE_DOWNSTREAM || |
| type == PCI_EXP_TYPE_PCIE_BRIDGE; /* PCI/PCI-X to PCIe Bridge */ |
| } |
| |
| static void show_power_limit(int value, int scale) |
| { |
| static const float scales[4] = { 1.0, 0.1, 0.01, 0.001 }; |
| |
| if (scale == 0 && value == 0xFF) |
| { |
| printf(">600W"); |
| return; |
| } |
| |
| if (scale == 0 && value >= 0xF0 && value <= 0xFE) |
| value = 250 + 25 * (value - 0xF0); |
| |
| printf("%gW", value * scales[scale]); |
| } |
| |
| static const char *latency_l0s(int value) |
| { |
| static const char *latencies[] = { "<64ns", "<128ns", "<256ns", "<512ns", "<1us", "<2us", "<4us", "unlimited" }; |
| return latencies[value]; |
| } |
| |
| static const char *latency_l1(int value) |
| { |
| static const char *latencies[] = { "<1us", "<2us", "<4us", "<8us", "<16us", "<32us", "<64us", "unlimited" }; |
| return latencies[value]; |
| } |
| |
| static void cap_express_dev(struct device *d, int where, int type) |
| { |
| u32 t; |
| u16 w; |
| |
| t = get_conf_long(d, where + PCI_EXP_DEVCAP); |
| printf("\t\tDevCap:\tMaxPayload %d bytes, PhantFunc %d", |
| 128 << (t & PCI_EXP_DEVCAP_PAYLOAD), |
| (1 << ((t & PCI_EXP_DEVCAP_PHANTOM) >> 3)) - 1); |
| if ((type == PCI_EXP_TYPE_ENDPOINT) || (type == PCI_EXP_TYPE_LEG_END)) |
| printf(", Latency L0s %s, L1 %s", |
| latency_l0s((t & PCI_EXP_DEVCAP_L0S) >> 6), |
| latency_l1((t & PCI_EXP_DEVCAP_L1) >> 9)); |
| printf("\n"); |
| printf("\t\t\tExtTag%c", FLAG(t, PCI_EXP_DEVCAP_EXT_TAG)); |
| if ((type == PCI_EXP_TYPE_ENDPOINT) || (type == PCI_EXP_TYPE_LEG_END) || |
| (type == PCI_EXP_TYPE_UPSTREAM) || (type == PCI_EXP_TYPE_PCI_BRIDGE)) |
| printf(" AttnBtn%c AttnInd%c PwrInd%c", |
| FLAG(t, PCI_EXP_DEVCAP_ATN_BUT), |
| FLAG(t, PCI_EXP_DEVCAP_ATN_IND), FLAG(t, PCI_EXP_DEVCAP_PWR_IND)); |
| printf(" RBE%c", |
| FLAG(t, PCI_EXP_DEVCAP_RBE)); |
| if ((type == PCI_EXP_TYPE_ENDPOINT) || (type == PCI_EXP_TYPE_LEG_END) || (type == PCI_EXP_TYPE_ROOT_INT_EP)) |
| printf(" FLReset%c", |
| FLAG(t, PCI_EXP_DEVCAP_FLRESET)); |
| if ((type == PCI_EXP_TYPE_ENDPOINT) || (type == PCI_EXP_TYPE_UPSTREAM) || |
| (type == PCI_EXP_TYPE_PCI_BRIDGE)) |
| { |
| printf(" SlotPowerLimit "); |
| show_power_limit((t & PCI_EXP_DEVCAP_PWR_VAL) >> 18, (t & PCI_EXP_DEVCAP_PWR_SCL) >> 26); |
| } |
| printf(" TEE-IO%c", FLAG(t, PCI_EXP_DEVCAP_TEE_IO)); |
| printf("\n"); |
| |
| w = get_conf_word(d, where + PCI_EXP_DEVCTL); |
| printf("\t\tDevCtl:\tCorrErr%c NonFatalErr%c FatalErr%c UnsupReq%c\n", |
| FLAG(w, PCI_EXP_DEVCTL_CERE), |
| FLAG(w, PCI_EXP_DEVCTL_NFERE), |
| FLAG(w, PCI_EXP_DEVCTL_FERE), |
| FLAG(w, PCI_EXP_DEVCTL_URRE)); |
| printf("\t\t\tRlxdOrd%c ExtTag%c PhantFunc%c AuxPwr%c NoSnoop%c", |
| FLAG(w, PCI_EXP_DEVCTL_RELAXED), |
| FLAG(w, PCI_EXP_DEVCTL_EXT_TAG), |
| FLAG(w, PCI_EXP_DEVCTL_PHANTOM), |
| FLAG(w, PCI_EXP_DEVCTL_AUX_PME), |
| FLAG(w, PCI_EXP_DEVCTL_NOSNOOP)); |
| if (type == PCI_EXP_TYPE_PCI_BRIDGE) |
| printf(" BrConfRtry%c", FLAG(w, PCI_EXP_DEVCTL_BCRE)); |
| if (((type == PCI_EXP_TYPE_ENDPOINT) || (type == PCI_EXP_TYPE_LEG_END) || (type == PCI_EXP_TYPE_ROOT_INT_EP)) && |
| (t & PCI_EXP_DEVCAP_FLRESET)) |
| printf(" FLReset%c", FLAG(w, PCI_EXP_DEVCTL_FLRESET)); |
| printf("\n\t\t\tMaxPayload %d bytes, MaxReadReq %d bytes\n", |
| 128 << ((w & PCI_EXP_DEVCTL_PAYLOAD) >> 5), |
| 128 << ((w & PCI_EXP_DEVCTL_READRQ) >> 12)); |
| |
| w = get_conf_word(d, where + PCI_EXP_DEVSTA); |
| printf("\t\tDevSta:\tCorrErr%c NonFatalErr%c FatalErr%c UnsupReq%c AuxPwr%c TransPend%c\n", |
| FLAG(w, PCI_EXP_DEVSTA_CED), |
| FLAG(w, PCI_EXP_DEVSTA_NFED), |
| FLAG(w, PCI_EXP_DEVSTA_FED), |
| FLAG(w, PCI_EXP_DEVSTA_URD), |
| FLAG(w, PCI_EXP_DEVSTA_AUXPD), |
| FLAG(w, PCI_EXP_DEVSTA_TRPND)); |
| } |
| |
| static char *link_speed(int speed) |
| { |
| switch (speed) |
| { |
| case 1: |
| return "2.5GT/s"; |
| case 2: |
| return "5GT/s"; |
| case 3: |
| return "8GT/s"; |
| case 4: |
| return "16GT/s"; |
| case 5: |
| return "32GT/s"; |
| case 6: |
| return "64GT/s"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| static char *link_compare(int type, int sta, int cap) |
| { |
| if (sta > cap) |
| return " (overdriven)"; |
| if (sta == cap) |
| return ""; |
| if ((type == PCI_EXP_TYPE_ROOT_PORT) || (type == PCI_EXP_TYPE_DOWNSTREAM) || |
| (type == PCI_EXP_TYPE_PCIE_BRIDGE)) |
| return ""; |
| return " (downgraded)"; |
| } |
| |
| static char *aspm_support(int code) |
| { |
| switch (code) |
| { |
| case 0: |
| return "not supported"; |
| case 1: |
| return "L0s"; |
| case 2: |
| return "L1"; |
| case 3: |
| return "L0s L1"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| static const char *aspm_enabled(int code) |
| { |
| static const char *desc[] = { "Disabled", "L0s Enabled", "L1 Enabled", "L0s L1 Enabled" }; |
| return desc[code]; |
| } |
| |
| static void cap_express_link(struct device *d, int where, int type) |
| { |
| u32 t, aspm, cap_speed, cap_width, sta_speed, sta_width; |
| u16 w; |
| |
| t = get_conf_long(d, where + PCI_EXP_LNKCAP); |
| aspm = (t & PCI_EXP_LNKCAP_ASPM) >> 10; |
| cap_speed = t & PCI_EXP_LNKCAP_SPEED; |
| cap_width = (t & PCI_EXP_LNKCAP_WIDTH) >> 4; |
| printf("\t\tLnkCap:\tPort #%d, Speed %s, Width x%d, ASPM %s", |
| t >> 24, |
| link_speed(cap_speed), cap_width, |
| aspm_support(aspm)); |
| if (aspm) |
| { |
| printf(", Exit Latency "); |
| if (aspm & 1) |
| printf("L0s %s", latency_l0s((t & PCI_EXP_LNKCAP_L0S) >> 12)); |
| if (aspm & 2) |
| printf("%sL1 %s", (aspm & 1) ? ", " : "", |
| latency_l1((t & PCI_EXP_LNKCAP_L1) >> 15)); |
| } |
| printf("\n"); |
| printf("\t\t\tClockPM%c Surprise%c LLActRep%c BwNot%c ASPMOptComp%c\n", |
| FLAG(t, PCI_EXP_LNKCAP_CLOCKPM), |
| FLAG(t, PCI_EXP_LNKCAP_SURPRISE), |
| FLAG(t, PCI_EXP_LNKCAP_DLLA), |
| FLAG(t, PCI_EXP_LNKCAP_LBNC), |
| FLAG(t, PCI_EXP_LNKCAP_AOC)); |
| |
| w = get_conf_word(d, where + PCI_EXP_LNKCTL); |
| printf("\t\tLnkCtl:\tASPM %s;", aspm_enabled(w & PCI_EXP_LNKCTL_ASPM)); |
| if ((type == PCI_EXP_TYPE_ROOT_PORT) || (type == PCI_EXP_TYPE_ENDPOINT) || |
| (type == PCI_EXP_TYPE_LEG_END) || (type == PCI_EXP_TYPE_PCI_BRIDGE)) |
| printf(" RCB %d bytes,", w & PCI_EXP_LNKCTL_RCB ? 128 : 64); |
| printf(" LnkDisable%c CommClk%c\n\t\t\tExtSynch%c ClockPM%c AutWidDis%c BWInt%c AutBWInt%c\n", |
| FLAG(w, PCI_EXP_LNKCTL_DISABLE), |
| FLAG(w, PCI_EXP_LNKCTL_CLOCK), |
| FLAG(w, PCI_EXP_LNKCTL_XSYNCH), |
| FLAG(w, PCI_EXP_LNKCTL_CLOCKPM), |
| FLAG(w, PCI_EXP_LNKCTL_HWAUTWD), |
| FLAG(w, PCI_EXP_LNKCTL_BWMIE), |
| FLAG(w, PCI_EXP_LNKCTL_AUTBWIE)); |
| |
| w = get_conf_word(d, where + PCI_EXP_LNKSTA); |
| sta_speed = w & PCI_EXP_LNKSTA_SPEED; |
| sta_width = (w & PCI_EXP_LNKSTA_WIDTH) >> 4; |
| printf("\t\tLnkSta:\tSpeed %s%s, Width x%d%s\n", |
| link_speed(sta_speed), |
| link_compare(type, sta_speed, cap_speed), |
| sta_width, |
| link_compare(type, sta_width, cap_width)); |
| printf("\t\t\tTrErr%c Train%c SlotClk%c DLActive%c BWMgmt%c ABWMgmt%c\n", |
| FLAG(w, PCI_EXP_LNKSTA_TR_ERR), |
| FLAG(w, PCI_EXP_LNKSTA_TRAIN), |
| FLAG(w, PCI_EXP_LNKSTA_SL_CLK), |
| FLAG(w, PCI_EXP_LNKSTA_DL_ACT), |
| FLAG(w, PCI_EXP_LNKSTA_BWMGMT), |
| FLAG(w, PCI_EXP_LNKSTA_AUTBW)); |
| } |
| |
| static const char *indicator(int code) |
| { |
| static const char *names[] = { "Unknown", "On", "Blink", "Off" }; |
| return names[code]; |
| } |
| |
| static void cap_express_slot(struct device *d, int where) |
| { |
| u32 t; |
| u16 w; |
| |
| t = get_conf_long(d, where + PCI_EXP_SLTCAP); |
| printf("\t\tSltCap:\tAttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c\n", |
| FLAG(t, PCI_EXP_SLTCAP_ATNB), |
| FLAG(t, PCI_EXP_SLTCAP_PWRC), |
| FLAG(t, PCI_EXP_SLTCAP_MRL), |
| FLAG(t, PCI_EXP_SLTCAP_ATNI), |
| FLAG(t, PCI_EXP_SLTCAP_PWRI), |
| FLAG(t, PCI_EXP_SLTCAP_HPC), |
| FLAG(t, PCI_EXP_SLTCAP_HPS)); |
| printf("\t\t\tSlot #%d, PowerLimit ", |
| (t & PCI_EXP_SLTCAP_PSN) >> 19); |
| show_power_limit((t & PCI_EXP_SLTCAP_PWR_VAL) >> 7, (t & PCI_EXP_SLTCAP_PWR_SCL) >> 15); |
| printf("; Interlock%c NoCompl%c\n", |
| FLAG(t, PCI_EXP_SLTCAP_INTERLOCK), |
| FLAG(t, PCI_EXP_SLTCAP_NOCMDCOMP)); |
| |
| w = get_conf_word(d, where + PCI_EXP_SLTCTL); |
| printf("\t\tSltCtl:\tEnable: AttnBtn%c PwrFlt%c MRL%c PresDet%c CmdCplt%c HPIrq%c LinkChg%c\n", |
| FLAG(w, PCI_EXP_SLTCTL_ATNB), |
| FLAG(w, PCI_EXP_SLTCTL_PWRF), |
| FLAG(w, PCI_EXP_SLTCTL_MRLS), |
| FLAG(w, PCI_EXP_SLTCTL_PRSD), |
| FLAG(w, PCI_EXP_SLTCTL_CMDC), |
| FLAG(w, PCI_EXP_SLTCTL_HPIE), |
| FLAG(w, PCI_EXP_SLTCTL_LLCHG)); |
| printf("\t\t\tControl: AttnInd %s, PwrInd %s, Power%c Interlock%c\n", |
| indicator((w & PCI_EXP_SLTCTL_ATNI) >> 6), |
| indicator((w & PCI_EXP_SLTCTL_PWRI) >> 8), |
| FLAG(w, PCI_EXP_SLTCTL_PWRC), |
| FLAG(w, PCI_EXP_SLTCTL_INTERLOCK)); |
| |
| w = get_conf_word(d, where + PCI_EXP_SLTSTA); |
| printf("\t\tSltSta:\tStatus: AttnBtn%c PowerFlt%c MRL%c CmdCplt%c PresDet%c Interlock%c\n", |
| FLAG(w, PCI_EXP_SLTSTA_ATNB), |
| FLAG(w, PCI_EXP_SLTSTA_PWRF), |
| FLAG(w, PCI_EXP_SLTSTA_MRL_ST), |
| FLAG(w, PCI_EXP_SLTSTA_CMDC), |
| FLAG(w, PCI_EXP_SLTSTA_PRES), |
| FLAG(w, PCI_EXP_SLTSTA_INTERLOCK)); |
| printf("\t\t\tChanged: MRL%c PresDet%c LinkState%c\n", |
| FLAG(w, PCI_EXP_SLTSTA_MRLS), |
| FLAG(w, PCI_EXP_SLTSTA_PRSD), |
| FLAG(w, PCI_EXP_SLTSTA_LLCHG)); |
| } |
| |
| static void cap_express_root(struct device *d, int where) |
| { |
| u32 w; |
| |
| w = get_conf_word(d, where + PCI_EXP_RTCAP); |
| printf("\t\tRootCap: CRSVisible%c\n", |
| FLAG(w, PCI_EXP_RTCAP_CRSVIS)); |
| |
| w = get_conf_word(d, where + PCI_EXP_RTCTL); |
| printf("\t\tRootCtl: ErrCorrectable%c ErrNon-Fatal%c ErrFatal%c PMEIntEna%c CRSVisible%c\n", |
| FLAG(w, PCI_EXP_RTCTL_SECEE), |
| FLAG(w, PCI_EXP_RTCTL_SENFEE), |
| FLAG(w, PCI_EXP_RTCTL_SEFEE), |
| FLAG(w, PCI_EXP_RTCTL_PMEIE), |
| FLAG(w, PCI_EXP_RTCTL_CRSVIS)); |
| |
| w = get_conf_long(d, where + PCI_EXP_RTSTA); |
| printf("\t\tRootSta: PME ReqID %04x, PMEStatus%c PMEPending%c\n", |
| w & PCI_EXP_RTSTA_PME_REQID, |
| FLAG(w, PCI_EXP_RTSTA_PME_STATUS), |
| FLAG(w, PCI_EXP_RTSTA_PME_PENDING)); |
| } |
| |
| static const char *cap_express_dev2_timeout_range(int type) |
| { |
| /* Decode Completion Timeout Ranges. */ |
| switch (type) |
| { |
| case 0: |
| return "Not Supported"; |
| case 1: |
| return "Range A"; |
| case 2: |
| return "Range B"; |
| case 3: |
| return "Range AB"; |
| case 6: |
| return "Range BC"; |
| case 7: |
| return "Range ABC"; |
| case 14: |
| return "Range BCD"; |
| case 15: |
| return "Range ABCD"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_dev2_timeout_value(int type) |
| { |
| /* Decode Completion Timeout Value. */ |
| switch (type) |
| { |
| case 0: |
| return "50us to 50ms"; |
| case 1: |
| return "50us to 100us"; |
| case 2: |
| return "1ms to 10ms"; |
| case 5: |
| return "16ms to 55ms"; |
| case 6: |
| return "65ms to 210ms"; |
| case 9: |
| return "260ms to 900ms"; |
| case 10: |
| return "1s to 3.5s"; |
| case 13: |
| return "4s to 13s"; |
| case 14: |
| return "17s to 64s"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_devcap2_obff(int obff) |
| { |
| switch (obff) |
| { |
| case 1: |
| return "Via message"; |
| case 2: |
| return "Via WAKE#"; |
| case 3: |
| return "Via message/WAKE#"; |
| default: |
| return "Not Supported"; |
| } |
| } |
| |
| static const char *cap_express_devcap2_epr(int epr) |
| { |
| switch (epr) |
| { |
| case 1: |
| return "Dev Specific"; |
| case 2: |
| return "Form Factor Dev Specific"; |
| case 3: |
| return "Reserved"; |
| default: |
| return "Not Supported"; |
| } |
| } |
| |
| static const char *cap_express_devcap2_lncls(int lncls) |
| { |
| switch (lncls) |
| { |
| case 1: |
| return "64byte cachelines"; |
| case 2: |
| return "128byte cachelines"; |
| case 3: |
| return "Reserved"; |
| default: |
| return "Not Supported"; |
| } |
| } |
| |
| static const char *cap_express_devcap2_tphcomp(int tph) |
| { |
| switch (tph) |
| { |
| case 1: |
| return "TPHComp+ ExtTPHComp-"; |
| case 2: |
| /* Reserved; intentionally left blank */ |
| return ""; |
| case 3: |
| return "TPHComp+ ExtTPHComp+"; |
| default: |
| return "TPHComp- ExtTPHComp-"; |
| } |
| } |
| |
| static const char *cap_express_devctl2_obff(int obff) |
| { |
| switch (obff) |
| { |
| case 0: |
| return "Disabled"; |
| case 1: |
| return "Via message A"; |
| case 2: |
| return "Via message B"; |
| case 3: |
| return "Via WAKE#"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static int |
| device_has_memory_space_bar(struct device *d) |
| { |
| struct pci_dev *p = d->dev; |
| int i, found = 0; |
| |
| for (i=0; i<6; i++) |
| if (p->base_addr[i] || p->size[i]) |
| { |
| if (!(p->base_addr[i] & PCI_BASE_ADDRESS_SPACE_IO)) |
| { |
| found = 1; |
| break; |
| } |
| } |
| return found; |
| } |
| |
| static void cap_express_dev2(struct device *d, int where, int type) |
| { |
| u32 l; |
| u16 w; |
| int has_mem_bar = device_has_memory_space_bar(d); |
| |
| l = get_conf_long(d, where + PCI_EXP_DEVCAP2); |
| printf("\t\tDevCap2: Completion Timeout: %s, TimeoutDis%c NROPrPrP%c LTR%c", |
| cap_express_dev2_timeout_range(PCI_EXP_DEVCAP2_TIMEOUT_RANGE(l)), |
| FLAG(l, PCI_EXP_DEVCAP2_TIMEOUT_DIS), |
| FLAG(l, PCI_EXP_DEVCAP2_NROPRPRP), |
| FLAG(l, PCI_EXP_DEVCAP2_LTR)); |
| printf("\n\t\t\t 10BitTagComp%c 10BitTagReq%c OBFF %s, ExtFmt%c EETLPPrefix%c", |
| FLAG(l, PCI_EXP_DEVCAP2_10BIT_TAG_COMP), |
| FLAG(l, PCI_EXP_DEVCAP2_10BIT_TAG_REQ), |
| cap_express_devcap2_obff(PCI_EXP_DEVCAP2_OBFF(l)), |
| FLAG(l, PCI_EXP_DEVCAP2_EXTFMT), |
| FLAG(l, PCI_EXP_DEVCAP2_EE_TLP)); |
| |
| if (PCI_EXP_DEVCAP2_EE_TLP == (l & PCI_EXP_DEVCAP2_EE_TLP)) |
| { |
| printf(", MaxEETLPPrefixes %d", |
| PCI_EXP_DEVCAP2_MEE_TLP(l) ? PCI_EXP_DEVCAP2_MEE_TLP(l) : 4); |
| } |
| |
| printf("\n\t\t\t EmergencyPowerReduction %s, EmergencyPowerReductionInit%c", |
| cap_express_devcap2_epr(PCI_EXP_DEVCAP2_EPR(l)), |
| FLAG(l, PCI_EXP_DEVCAP2_EPR_INIT)); |
| printf("\n\t\t\t FRS%c", FLAG(l, PCI_EXP_DEVCAP2_FRS)); |
| |
| if (type == PCI_EXP_TYPE_ROOT_PORT) |
| printf(" LN System CLS %s,", |
| cap_express_devcap2_lncls(PCI_EXP_DEVCAP2_LN_CLS(l))); |
| |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_ENDPOINT) |
| printf(" %s", cap_express_devcap2_tphcomp(PCI_EXP_DEVCAP2_TPH_COMP(l))); |
| |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_DOWNSTREAM) |
| printf(" ARIFwd%c\n", FLAG(l, PCI_EXP_DEVCAP2_ARI)); |
| else |
| printf("\n"); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM || has_mem_bar) |
| { |
| printf("\t\t\t AtomicOpsCap:"); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM) |
| printf(" Routing%c", FLAG(l, PCI_EXP_DEVCAP2_ATOMICOP_ROUTING)); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || has_mem_bar) |
| printf(" 32bit%c 64bit%c 128bitCAS%c", |
| FLAG(l, PCI_EXP_DEVCAP2_32BIT_ATOMICOP_COMP), |
| FLAG(l, PCI_EXP_DEVCAP2_64BIT_ATOMICOP_COMP), |
| FLAG(l, PCI_EXP_DEVCAP2_128BIT_CAS_COMP)); |
| printf("\n"); |
| } |
| |
| w = get_conf_word(d, where + PCI_EXP_DEVCTL2); |
| printf("\t\tDevCtl2: Completion Timeout: %s, TimeoutDis%c", |
| cap_express_dev2_timeout_value(PCI_EXP_DEVCTL2_TIMEOUT_VALUE(w)), |
| FLAG(w, PCI_EXP_DEVCTL2_TIMEOUT_DIS)); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_DOWNSTREAM) |
| printf(" ARIFwd%c\n", FLAG(w, PCI_EXP_DEVCTL2_ARI)); |
| else |
| printf("\n"); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM || type == PCI_EXP_TYPE_ENDPOINT || |
| type == PCI_EXP_TYPE_ROOT_INT_EP || type == PCI_EXP_TYPE_LEG_END) |
| { |
| printf("\t\t\t AtomicOpsCtl:"); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_ENDPOINT || |
| type == PCI_EXP_TYPE_ROOT_INT_EP || type == PCI_EXP_TYPE_LEG_END) |
| printf(" ReqEn%c", FLAG(w, PCI_EXP_DEVCTL2_ATOMICOP_REQUESTER_EN)); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM) |
| printf(" EgressBlck%c", FLAG(w, PCI_EXP_DEVCTL2_ATOMICOP_EGRESS_BLOCK)); |
| printf("\n"); |
| } |
| printf("\t\t\t IDOReq%c IDOCompl%c LTR%c EmergencyPowerReductionReq%c\n", |
| FLAG(w, PCI_EXP_DEVCTL2_IDO_REQ_EN), |
| FLAG(w, PCI_EXP_DEVCTL2_IDO_CMP_EN), |
| FLAG(w, PCI_EXP_DEVCTL2_LTR), |
| FLAG(w, PCI_EXP_DEVCTL2_EPR_REQ)); |
| printf("\t\t\t 10BitTagReq%c OBFF %s, EETLPPrefixBlk%c\n", |
| FLAG(w, PCI_EXP_DEVCTL2_10BIT_TAG_REQ), |
| cap_express_devctl2_obff(PCI_EXP_DEVCTL2_OBFF(w)), |
| FLAG(w, PCI_EXP_DEVCTL2_EE_TLP_BLK)); |
| } |
| |
| static const char *cap_express_link2_speed_cap(int vector) |
| { |
| /* |
| * Per PCIe r5.0, sec 8.2.1, a device must support 2.5GT/s and is not |
| * permitted to skip support for any data rates between 2.5GT/s and the |
| * highest supported rate. |
| */ |
| if (vector & 0x40) |
| return "RsvdP"; |
| if (vector & 0x20) |
| return "2.5-64GT/s"; |
| if (vector & 0x10) |
| return "2.5-32GT/s"; |
| if (vector & 0x08) |
| return "2.5-16GT/s"; |
| if (vector & 0x04) |
| return "2.5-8GT/s"; |
| if (vector & 0x02) |
| return "2.5-5GT/s"; |
| if (vector & 0x01) |
| return "2.5GT/s"; |
| |
| return "Unknown"; |
| } |
| |
| static const char *cap_express_link2_speed(int type) |
| { |
| switch (type) |
| { |
| case 0: /* hardwire to 0 means only the 2.5GT/s is supported */ |
| case 1: |
| return "2.5GT/s"; |
| case 2: |
| return "5GT/s"; |
| case 3: |
| return "8GT/s"; |
| case 4: |
| return "16GT/s"; |
| case 5: |
| return "32GT/s"; |
| case 6: |
| return "64GT/s"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_link2_deemphasis(int type) |
| { |
| switch (type) |
| { |
| case 0: |
| return "-6dB"; |
| case 1: |
| return "-3.5dB"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_link2_compliance_preset(int type) |
| { |
| switch (type) |
| { |
| case 0: |
| return "-6dB de-emphasis, 0dB preshoot"; |
| case 1: |
| return "-3.5dB de-emphasis, 0dB preshoot"; |
| case 2: |
| return "-4.4dB de-emphasis, 0dB preshoot"; |
| case 3: |
| return "-2.5dB de-emphasis, 0dB preshoot"; |
| case 4: |
| return "0dB de-emphasis, 0dB preshoot"; |
| case 5: |
| return "0dB de-emphasis, 1.9dB preshoot"; |
| case 6: |
| return "0dB de-emphasis, 2.5dB preshoot"; |
| case 7: |
| return "-6.0dB de-emphasis, 3.5dB preshoot"; |
| case 8: |
| return "-3.5dB de-emphasis, 3.5dB preshoot"; |
| case 9: |
| return "0dB de-emphasis, 3.5dB preshoot"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_link2_transmargin(int type) |
| { |
| switch (type) |
| { |
| case 0: |
| return "Normal Operating Range"; |
| case 1: |
| return "800-1200mV(full-swing)/400-700mV(half-swing)"; |
| case 2: |
| case 3: |
| case 4: |
| case 5: |
| return "200-400mV(full-swing)/100-200mV(half-swing)"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static const char *cap_express_link2_crosslink_res(int crosslink) |
| { |
| switch (crosslink) |
| { |
| case 0: |
| return "unsupported"; |
| case 1: |
| return "Upstream Port"; |
| case 2: |
| return "Downstream Port"; |
| default: |
| return "incomplete"; |
| } |
| } |
| |
| static const char *cap_express_link2_component(int presence) |
| { |
| switch (presence) |
| { |
| case 0: |
| return "Link Down - Not Determined"; |
| case 1: |
| return "Link Down - Not Present"; |
| case 2: |
| return "Link Down - Present"; |
| case 4: |
| return "Link Up - Present"; |
| case 5: |
| return "Link Up - Present and DRS Received"; |
| default: |
| return "Reserved"; |
| } |
| } |
| |
| static void cap_express_link2(struct device *d, int where, int type) |
| { |
| u32 l = 0; |
| u16 w; |
| |
| if (!((type == PCI_EXP_TYPE_ENDPOINT || type == PCI_EXP_TYPE_LEG_END) && |
| (d->dev->dev != 0 || d->dev->func != 0))) { |
| /* Link Capabilities 2 was reserved before PCIe r3.0 */ |
| l = get_conf_long(d, where + PCI_EXP_LNKCAP2); |
| if (l) { |
| printf("\t\tLnkCap2: Supported Link Speeds: %s, Crosslink%c " |
| "Retimer%c 2Retimers%c DRS%c\n", |
| cap_express_link2_speed_cap(PCI_EXP_LNKCAP2_SPEED(l)), |
| FLAG(l, PCI_EXP_LNKCAP2_CROSSLINK), |
| FLAG(l, PCI_EXP_LNKCAP2_RETIMER), |
| FLAG(l, PCI_EXP_LNKCAP2_2RETIMERS), |
| FLAG(l, PCI_EXP_LNKCAP2_DRS)); |
| } |
| |
| w = get_conf_word(d, where + PCI_EXP_LNKCTL2); |
| printf("\t\tLnkCtl2: Target Link Speed: %s, EnterCompliance%c SpeedDis%c", |
| cap_express_link2_speed(PCI_EXP_LNKCTL2_SPEED(w)), |
| FLAG(w, PCI_EXP_LNKCTL2_CMPLNC), |
| FLAG(w, PCI_EXP_LNKCTL2_SPEED_DIS)); |
| if (type == PCI_EXP_TYPE_DOWNSTREAM) |
| printf(", Selectable De-emphasis: %s", |
| cap_express_link2_deemphasis(PCI_EXP_LNKCTL2_DEEMPHASIS(w))); |
| printf("\n" |
| "\t\t\t Transmit Margin: %s, EnterModifiedCompliance%c ComplianceSOS%c\n" |
| "\t\t\t Compliance Preset/De-emphasis: %s\n", |
| cap_express_link2_transmargin(PCI_EXP_LNKCTL2_MARGIN(w)), |
| FLAG(w, PCI_EXP_LNKCTL2_MOD_CMPLNC), |
| FLAG(w, PCI_EXP_LNKCTL2_CMPLNC_SOS), |
| cap_express_link2_compliance_preset(PCI_EXP_LNKCTL2_COM_DEEMPHASIS(w))); |
| } |
| |
| w = get_conf_word(d, where + PCI_EXP_LNKSTA2); |
| printf("\t\tLnkSta2: Current De-emphasis Level: %s, EqualizationComplete%c EqualizationPhase1%c\n" |
| "\t\t\t EqualizationPhase2%c EqualizationPhase3%c LinkEqualizationRequest%c\n" |
| "\t\t\t Retimer%c 2Retimers%c CrosslinkRes: %s", |
| cap_express_link2_deemphasis(PCI_EXP_LINKSTA2_DEEMPHASIS(w)), |
| FLAG(w, PCI_EXP_LINKSTA2_EQU_COMP), |
| FLAG(w, PCI_EXP_LINKSTA2_EQU_PHASE1), |
| FLAG(w, PCI_EXP_LINKSTA2_EQU_PHASE2), |
| FLAG(w, PCI_EXP_LINKSTA2_EQU_PHASE3), |
| FLAG(w, PCI_EXP_LINKSTA2_EQU_REQ), |
| FLAG(w, PCI_EXP_LINKSTA2_RETIMER), |
| FLAG(w, PCI_EXP_LINKSTA2_2RETIMERS), |
| cap_express_link2_crosslink_res(PCI_EXP_LINKSTA2_CROSSLINK(w))); |
| |
| if (exp_downstream_port(type) && (l & PCI_EXP_LNKCAP2_DRS)) { |
| printf(", DRS%c\n" |
| "\t\t\t DownstreamComp: %s\n", |
| FLAG(w, PCI_EXP_LINKSTA2_DRS_RCVD), |
| cap_express_link2_component(PCI_EXP_LINKSTA2_COMPONENT(w))); |
| } else |
| printf("\n"); |
| } |
| |
| static void cap_express_slot2(struct device *d UNUSED, int where UNUSED) |
| { |
| /* No capabilities that require this field in PCIe rev2.0 spec. */ |
| } |
| |
| static void cap_express_link_rcd(struct device *d) |
| { |
| u32 t, aspm, cap_speed, cap_width, sta_speed, sta_width; |
| u16 w; |
| struct pci_dev *pdev = d->dev; |
| |
| if (!pdev->rcd_link_cap) |
| return; |
| |
| t = pdev->rcd_link_cap; |
| aspm = (t & PCI_EXP_LNKCAP_ASPM) >> 10; |
| cap_speed = t & PCI_EXP_LNKCAP_SPEED; |
| cap_width = (t & PCI_EXP_LNKCAP_WIDTH) >> 4; |
| printf("\t\tLnkCap:\tPort #%d, Speed %s, Width x%d, ASPM %s", |
| t >> 24, |
| link_speed(cap_speed), cap_width, |
| aspm_support(aspm)); |
| if (aspm) |
| { |
| printf(", Exit Latency "); |
| if (aspm & 1) |
| printf("L0s %s", latency_l0s((t & PCI_EXP_LNKCAP_L0S) >> 12)); |
| if (aspm & 2) |
| printf("%sL1 %s", (aspm & 1) ? ", " : "", |
| latency_l1((t & PCI_EXP_LNKCAP_L1) >> 15)); |
| } |
| printf("\n"); |
| printf("\t\t\tClockPM%c Surprise%c LLActRep%c BwNot%c ASPMOptComp%c\n", |
| FLAG(t, PCI_EXP_LNKCAP_CLOCKPM), |
| FLAG(t, PCI_EXP_LNKCAP_SURPRISE), |
| FLAG(t, PCI_EXP_LNKCAP_DLLA), |
| FLAG(t, PCI_EXP_LNKCAP_LBNC), |
| FLAG(t, PCI_EXP_LNKCAP_AOC)); |
| |
| w = pdev->rcd_link_ctrl; |
| printf("\t\tLnkCtl:\tASPM %s;", aspm_enabled(w & PCI_EXP_LNKCTL_ASPM)); |
| printf(" Disabled%c CommClk%c\n\t\t\tExtSynch%c ClockPM%c AutWidDis%c BWInt%c AutBWInt%c\n", |
| FLAG(w, PCI_EXP_LNKCTL_DISABLE), |
| FLAG(w, PCI_EXP_LNKCTL_CLOCK), |
| FLAG(w, PCI_EXP_LNKCTL_XSYNCH), |
| FLAG(w, PCI_EXP_LNKCTL_CLOCKPM), |
| FLAG(w, PCI_EXP_LNKCTL_HWAUTWD), |
| FLAG(w, PCI_EXP_LNKCTL_BWMIE), |
| FLAG(w, PCI_EXP_LNKCTL_AUTBWIE)); |
| |
| w = pdev->rcd_link_status; |
| sta_speed = w & PCI_EXP_LNKSTA_SPEED; |
| sta_width = (w & PCI_EXP_LNKSTA_WIDTH) >> 4; |
| printf("\t\tLnkSta:\tSpeed %s%s, Width x%d%s\n", |
| link_speed(sta_speed), |
| link_compare(PCI_EXP_TYPE_ROOT_INT_EP, sta_speed, cap_speed), |
| sta_width, |
| link_compare(PCI_EXP_TYPE_ROOT_INT_EP, sta_width, cap_width)); |
| printf("\t\t\tTrErr%c Train%c SlotClk%c DLActive%c BWMgmt%c ABWMgmt%c\n", |
| FLAG(w, PCI_EXP_LNKSTA_TR_ERR), |
| FLAG(w, PCI_EXP_LNKSTA_TRAIN), |
| FLAG(w, PCI_EXP_LNKSTA_SL_CLK), |
| FLAG(w, PCI_EXP_LNKSTA_DL_ACT), |
| FLAG(w, PCI_EXP_LNKSTA_BWMGMT), |
| FLAG(w, PCI_EXP_LNKSTA_AUTBW)); |
| } |
| |
| static int |
| cap_express(struct device *d, int where, int cap) |
| { |
| int type = (cap & PCI_EXP_FLAGS_TYPE) >> 4; |
| int size; |
| int slot = 0; |
| int link = 1; |
| |
| printf("Express "); |
| if (verbose >= 2) |
| printf("(v%d) ", cap & PCI_EXP_FLAGS_VERS); |
| switch (type) |
| { |
| case PCI_EXP_TYPE_ENDPOINT: |
| printf("Endpoint"); |
| break; |
| case PCI_EXP_TYPE_LEG_END: |
| printf("Legacy Endpoint"); |
| break; |
| case PCI_EXP_TYPE_ROOT_PORT: |
| slot = cap & PCI_EXP_FLAGS_SLOT; |
| printf("Root Port (Slot%c)", FLAG(cap, PCI_EXP_FLAGS_SLOT)); |
| break; |
| case PCI_EXP_TYPE_UPSTREAM: |
| printf("Upstream Port"); |
| break; |
| case PCI_EXP_TYPE_DOWNSTREAM: |
| slot = cap & PCI_EXP_FLAGS_SLOT; |
| printf("Downstream Port (Slot%c)", FLAG(cap, PCI_EXP_FLAGS_SLOT)); |
| break; |
| case PCI_EXP_TYPE_PCI_BRIDGE: |
| printf("PCI-Express to PCI/PCI-X Bridge"); |
| break; |
| case PCI_EXP_TYPE_PCIE_BRIDGE: |
| slot = cap & PCI_EXP_FLAGS_SLOT; |
| printf("PCI/PCI-X to PCI-Express Bridge (Slot%c)", |
| FLAG(cap, PCI_EXP_FLAGS_SLOT)); |
| break; |
| case PCI_EXP_TYPE_ROOT_INT_EP: |
| link = 0; |
| printf("Root Complex Integrated Endpoint"); |
| break; |
| case PCI_EXP_TYPE_ROOT_EC: |
| link = 0; |
| printf("Root Complex Event Collector"); |
| break; |
| default: |
| printf("Unknown type %d", type); |
| } |
| printf(", IntMsgNum %d\n", (cap & PCI_EXP_FLAGS_IRQ) >> 9); |
| if (verbose < 2) |
| return type; |
| |
| size = 16; |
| if (slot) |
| size = 24; |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_ROOT_EC) |
| size = 32; |
| if (!config_fetch(d, where + PCI_EXP_DEVCAP, size)) |
| return type; |
| |
| cap_express_dev(d, where, type); |
| if (link) |
| cap_express_link(d, where, type); |
| else if (d->dev->rcd_link_cap) |
| cap_express_link_rcd(d); |
| |
| if (slot) |
| cap_express_slot(d, where); |
| if (type == PCI_EXP_TYPE_ROOT_PORT || type == PCI_EXP_TYPE_ROOT_EC) |
| cap_express_root(d, where); |
| |
| if ((cap & PCI_EXP_FLAGS_VERS) < 2) |
| return type; |
| |
| size = 16; |
| if (slot) |
| size = 24; |
| if (!config_fetch(d, where + PCI_EXP_DEVCAP2, size)) |
| return type; |
| |
| cap_express_dev2(d, where, type); |
| if (link) |
| cap_express_link2(d, where, type); |
| if (slot) |
| cap_express_slot2(d, where); |
| return type; |
| } |
| |
| static void |
| cap_msix(struct device *d, int where, int cap) |
| { |
| u32 off; |
| |
| printf("MSI-X: Enable%c Count=%d Masked%c\n", |
| FLAG(cap, PCI_MSIX_ENABLE), |
| (cap & PCI_MSIX_TABSIZE) + 1, |
| FLAG(cap, PCI_MSIX_MASK)); |
| if (verbose < 2 || !config_fetch(d, where + PCI_MSIX_TABLE, 8)) |
| return; |
| |
| off = get_conf_long(d, where + PCI_MSIX_TABLE); |
| printf("\t\tVector table: BAR=%d offset=%08x\n", |
| off & PCI_MSIX_BIR, off & ~PCI_MSIX_BIR); |
| off = get_conf_long(d, where + PCI_MSIX_PBA); |
| printf("\t\tPBA: BAR=%d offset=%08x\n", |
| off & PCI_MSIX_BIR, off & ~PCI_MSIX_BIR); |
| } |
| |
| static void |
| cap_slotid(int cap) |
| { |
| int esr = cap & 0xff; |
| int chs = cap >> 8; |
| |
| printf("Slot ID: %d slots, First%c, chassis %02x\n", |
| esr & PCI_SID_ESR_NSLOTS, |
| FLAG(esr, PCI_SID_ESR_FIC), |
| chs); |
| } |
| |
| static void |
| cap_ssvid(struct device *d, int where) |
| { |
| u16 subsys_v, subsys_d; |
| char ssnamebuf[256]; |
| |
| if (!config_fetch(d, where, 8)) |
| return; |
| subsys_v = get_conf_word(d, where + PCI_SSVID_VENDOR); |
| subsys_d = get_conf_word(d, where + PCI_SSVID_DEVICE); |
| printf("Subsystem: %s\n", |
| pci_lookup_name(pacc, ssnamebuf, sizeof(ssnamebuf), |
| PCI_LOOKUP_SUBSYSTEM | PCI_LOOKUP_VENDOR | PCI_LOOKUP_DEVICE, |
| d->dev->vendor_id, d->dev->device_id, subsys_v, subsys_d)); |
| } |
| |
| static void |
| cap_debug_port(int cap) |
| { |
| int bar = cap >> 13; |
| int pos = cap & 0x1fff; |
| printf("Debug port: BAR=%d offset=%04x\n", bar, pos); |
| } |
| |
| static void |
| cap_af(struct device *d, int where) |
| { |
| u8 reg; |
| |
| printf("PCI Advanced Features\n"); |
| if (verbose < 2 || !config_fetch(d, where + PCI_AF_CAP, 3)) |
| return; |
| |
| reg = get_conf_byte(d, where + PCI_AF_CAP); |
| printf("\t\tAFCap: TP%c FLR%c\n", FLAG(reg, PCI_AF_CAP_TP), |
| FLAG(reg, PCI_AF_CAP_FLR)); |
| reg = get_conf_byte(d, where + PCI_AF_CTRL); |
| printf("\t\tAFCtrl: FLR%c\n", FLAG(reg, PCI_AF_CTRL_FLR)); |
| reg = get_conf_byte(d, where + PCI_AF_STATUS); |
| printf("\t\tAFStatus: TP%c\n", FLAG(reg, PCI_AF_STATUS_TP)); |
| } |
| |
| static void |
| cap_sata_hba(struct device *d, int where, int cap) |
| { |
| u32 bars; |
| int bar; |
| |
| printf("SATA HBA v%d.%d", BITS(cap, 4, 4), BITS(cap, 0, 4)); |
| if (verbose < 2 || !config_fetch(d, where + PCI_SATA_HBA_BARS, 4)) |
| { |
| printf("\n"); |
| return; |
| } |
| |
| bars = get_conf_long(d, where + PCI_SATA_HBA_BARS); |
| bar = BITS(bars, 0, 4); |
| if (bar >= 4 && bar <= 9) |
| printf(" BAR%d Offset=%08x\n", bar - 4, BITS(bars, 4, 20)); |
| else if (bar == 15) |
| printf(" InCfgSpace\n"); |
| else |
| printf(" BAR??%d\n", bar); |
| } |
| |
| static const char *cap_ea_property(int p, int is_secondary) |
| { |
| switch (p) { |
| case 0x00: |
| return "memory space, non-prefetchable"; |
| case 0x01: |
| return "memory space, prefetchable"; |
| case 0x02: |
| return "I/O space"; |
| case 0x03: |
| return "VF memory space, prefetchable"; |
| case 0x04: |
| return "VF memory space, non-prefetchable"; |
| case 0x05: |
| return "allocation behind bridge, non-prefetchable memory"; |
| case 0x06: |
| return "allocation behind bridge, prefetchable memory"; |
| case 0x07: |
| return "allocation behind bridge, I/O space"; |
| case 0xfd: |
| return "memory space resource unavailable for use"; |
| case 0xfe: |
| return "I/O space resource unavailable for use"; |
| case 0xff: |
| if (is_secondary) |
| return "entry unavailable for use, PrimaryProperties should be used"; |
| else |
| return "entry unavailable for use"; |
| default: |
| return NULL; |
| } |
| } |
| |
| static void cap_ea(struct device *d, int where, int cap) |
| { |
| int entry; |
| int entry_base = where + 4; |
| int num_entries = BITS(cap, 0, 6); |
| u8 htype = get_conf_byte(d, PCI_HEADER_TYPE) & 0x7f; |
| |
| printf("Enhanced Allocation (EA): NumEntries=%u", num_entries); |
| if (htype == PCI_HEADER_TYPE_BRIDGE) { |
| byte fixed_sub, fixed_sec; |
| |
| entry_base += 4; |
| if (!config_fetch(d, where + 4, 2)) { |
| printf("\n"); |
| return; |
| } |
| fixed_sec = get_conf_byte(d, where + PCI_EA_CAP_TYPE1_SECONDARY); |
| fixed_sub = get_conf_byte(d, where + PCI_EA_CAP_TYPE1_SUBORDINATE); |
| printf(", secondary=%d, subordinate=%d", fixed_sec, fixed_sub); |
| } |
| printf("\n"); |
| if (verbose < 2) |
| return; |
| |
| for (entry = 0; entry < num_entries; entry++) { |
| int max_offset_high_pos, has_base_high, has_max_offset_high; |
| u32 entry_header; |
| u32 base, max_offset; |
| int es, bei, pp, sp; |
| const char *prop_text; |
| |
| if (!config_fetch(d, entry_base, 4)) |
| return; |
| entry_header = get_conf_long(d, entry_base); |
| es = BITS(entry_header, 0, 3); |
| bei = BITS(entry_header, 4, 4); |
| pp = BITS(entry_header, 8, 8); |
| sp = BITS(entry_header, 16, 8); |
| if (!config_fetch(d, entry_base + 4, es * 4)) |
| return; |
| printf("\t\tEntry %u: Enable%c Writable%c EntrySize=%u\n", entry, |
| FLAG(entry_header, PCI_EA_CAP_ENT_ENABLE), |
| FLAG(entry_header, PCI_EA_CAP_ENT_WRITABLE), es); |
| printf("\t\t\t BAR Equivalent Indicator: "); |
| switch (bei) { |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 5: |
| printf("BAR %u", bei); |
| break; |
| case 6: |
| printf("resource behind function"); |
| break; |
| case 7: |
| printf("not indicated"); |
| break; |
| case 8: |
| printf("expansion ROM"); |
| break; |
| case 9: |
| case 10: |
| case 11: |
| case 12: |
| case 13: |
| case 14: |
| printf("VF-BAR %u", bei - 9); |
| break; |
| default: |
| printf("reserved"); |
| break; |
| } |
| printf("\n"); |
| |
| prop_text = cap_ea_property(pp, 0); |
| printf("\t\t\t PrimaryProperties: "); |
| if (prop_text) |
| printf("%s\n", prop_text); |
| else |
| printf("[%02x]\n", pp); |
| |
| prop_text = cap_ea_property(sp, 1); |
| printf("\t\t\t SecondaryProperties: "); |
| if (prop_text) |
| printf("%s\n", prop_text); |
| else |
| printf("[%02x]\n", sp); |
| |
| base = get_conf_long(d, entry_base + 4); |
| has_base_high = ((base & 2) != 0); |
| base &= ~3; |
| |
| max_offset = get_conf_long(d, entry_base + 8); |
| has_max_offset_high = ((max_offset & 2) != 0); |
| max_offset |= 3; |
| max_offset_high_pos = entry_base + 12; |
| |
| printf("\t\t\t Base: "); |
| if (has_base_high) { |
| u32 base_high = get_conf_long(d, entry_base + 12); |
| |
| printf("%x", base_high); |
| max_offset_high_pos += 4; |
| } |
| printf("%08x\n", base); |
| |
| printf("\t\t\t MaxOffset: "); |
| if (has_max_offset_high) { |
| u32 max_offset_high = get_conf_long(d, max_offset_high_pos); |
| |
| printf("%x", max_offset_high); |
| } |
| printf("%08x\n", max_offset); |
| |
| entry_base += 4 + 4 * es; |
| } |
| } |
| |
| void |
| show_caps(struct device *d, int where) |
| { |
| int can_have_ext_caps = 0; |
| int type = -1; |
| |
| if (get_conf_word(d, PCI_STATUS) & PCI_STATUS_CAP_LIST) |
| { |
| byte been_there[256]; |
| where = get_conf_byte(d, where) & ~3; |
| memset(been_there, 0, 256); |
| while (where) |
| { |
| int id, next, cap; |
| printf("\tCapabilities: "); |
| if (!config_fetch(d, where, 4)) |
| { |
| puts("<access denied>"); |
| break; |
| } |
| id = get_conf_byte(d, where + PCI_CAP_LIST_ID); |
| next = get_conf_byte(d, where + PCI_CAP_LIST_NEXT) & ~3; |
| cap = get_conf_word(d, where + PCI_CAP_FLAGS); |
| printf("[%02x] ", where); |
| if (been_there[where]++) |
| { |
| printf("<chain looped>\n"); |
| break; |
| } |
| if (id == 0xff) |
| { |
| printf("<chain broken>\n"); |
| break; |
| } |
| switch (id) |
| { |
| case PCI_CAP_ID_NULL: |
| printf("Null\n"); |
| break; |
| case PCI_CAP_ID_PM: |
| cap_pm(d, where, cap); |
| break; |
| case PCI_CAP_ID_AGP: |
| cap_agp(d, where, cap); |
| break; |
| case PCI_CAP_ID_VPD: |
| cap_vpd(d); |
| break; |
| case PCI_CAP_ID_SLOTID: |
| cap_slotid(cap); |
| break; |
| case PCI_CAP_ID_MSI: |
| cap_msi(d, where, cap); |
| break; |
| case PCI_CAP_ID_CHSWP: |
| printf("CompactPCI hot-swap <?>\n"); |
| break; |
| case PCI_CAP_ID_PCIX: |
| cap_pcix(d, where); |
| can_have_ext_caps = 1; |
| break; |
| case PCI_CAP_ID_HT: |
| cap_ht(d, where, cap); |
| break; |
| case PCI_CAP_ID_VNDR: |
| show_vendor_caps(d, where, cap); |
| break; |
| case PCI_CAP_ID_DBG: |
| cap_debug_port(cap); |
| break; |
| case PCI_CAP_ID_CCRC: |
| printf("CompactPCI central resource control <?>\n"); |
| break; |
| case PCI_CAP_ID_HOTPLUG: |
| printf("Hot-plug capable\n"); |
| break; |
| case PCI_CAP_ID_SSVID: |
| cap_ssvid(d, where); |
| break; |
| case PCI_CAP_ID_AGP3: |
| printf("AGP3 <?>\n"); |
| break; |
| case PCI_CAP_ID_SECURE: |
| printf("Secure device <?>\n"); |
| break; |
| case PCI_CAP_ID_EXP: |
| type = cap_express(d, where, cap); |
| can_have_ext_caps = 1; |
| break; |
| case PCI_CAP_ID_MSIX: |
| cap_msix(d, where, cap); |
| break; |
| case PCI_CAP_ID_SATA: |
| cap_sata_hba(d, where, cap); |
| break; |
| case PCI_CAP_ID_AF: |
| cap_af(d, where); |
| break; |
| case PCI_CAP_ID_EA: |
| cap_ea(d, where, cap); |
| break; |
| default: |
| printf("Capability ID %#02x [%04x]\n", id, cap); |
| } |
| where = next; |
| } |
| } |
| if (can_have_ext_caps) |
| show_ext_caps(d, type); |
| } |