| // Currently, rust warns when an unsafe fn contains an unsafe {} block. However, |
| // in the future, this will change to the reverse. For now, suppress this |
| // warning and generally stick with being explicit about unsafety. |
| #![allow(unused_unsafe)] |
| #![cfg_attr(not(feature = "rt"), allow(dead_code))] |
| |
| //! Time driver. |
| |
| mod entry; |
| pub(crate) use entry::TimerEntry; |
| use entry::{EntryList, TimerHandle, TimerShared, MAX_SAFE_MILLIS_DURATION}; |
| |
| mod handle; |
| pub(crate) use self::handle::Handle; |
| |
| mod source; |
| pub(crate) use source::TimeSource; |
| |
| mod wheel; |
| |
| use crate::loom::sync::atomic::{AtomicBool, Ordering}; |
| use crate::loom::sync::Mutex; |
| use crate::runtime::driver::{self, IoHandle, IoStack}; |
| use crate::time::error::Error; |
| use crate::time::{Clock, Duration}; |
| |
| use std::fmt; |
| use std::{num::NonZeroU64, ptr::NonNull, task::Waker}; |
| |
| /// Time implementation that drives [`Sleep`][sleep], [`Interval`][interval], and [`Timeout`][timeout]. |
| /// |
| /// A `Driver` instance tracks the state necessary for managing time and |
| /// notifying the [`Sleep`][sleep] instances once their deadlines are reached. |
| /// |
| /// It is expected that a single instance manages many individual [`Sleep`][sleep] |
| /// instances. The `Driver` implementation is thread-safe and, as such, is able |
| /// to handle callers from across threads. |
| /// |
| /// After creating the `Driver` instance, the caller must repeatedly call `park` |
| /// or `park_timeout`. The time driver will perform no work unless `park` or |
| /// `park_timeout` is called repeatedly. |
| /// |
| /// The driver has a resolution of one millisecond. Any unit of time that falls |
| /// between milliseconds are rounded up to the next millisecond. |
| /// |
| /// When an instance is dropped, any outstanding [`Sleep`][sleep] instance that has not |
| /// elapsed will be notified with an error. At this point, calling `poll` on the |
| /// [`Sleep`][sleep] instance will result in panic. |
| /// |
| /// # Implementation |
| /// |
| /// The time driver is based on the [paper by Varghese and Lauck][paper]. |
| /// |
| /// A hashed timing wheel is a vector of slots, where each slot handles a time |
| /// slice. As time progresses, the timer walks over the slot for the current |
| /// instant, and processes each entry for that slot. When the timer reaches the |
| /// end of the wheel, it starts again at the beginning. |
| /// |
| /// The implementation maintains six wheels arranged in a set of levels. As the |
| /// levels go up, the slots of the associated wheel represent larger intervals |
| /// of time. At each level, the wheel has 64 slots. Each slot covers a range of |
| /// time equal to the wheel at the lower level. At level zero, each slot |
| /// represents one millisecond of time. |
| /// |
| /// The wheels are: |
| /// |
| /// * Level 0: 64 x 1 millisecond slots. |
| /// * Level 1: 64 x 64 millisecond slots. |
| /// * Level 2: 64 x ~4 second slots. |
| /// * Level 3: 64 x ~4 minute slots. |
| /// * Level 4: 64 x ~4 hour slots. |
| /// * Level 5: 64 x ~12 day slots. |
| /// |
| /// When the timer processes entries at level zero, it will notify all the |
| /// `Sleep` instances as their deadlines have been reached. For all higher |
| /// levels, all entries will be redistributed across the wheel at the next level |
| /// down. Eventually, as time progresses, entries with [`Sleep`][sleep] instances will |
| /// either be canceled (dropped) or their associated entries will reach level |
| /// zero and be notified. |
| /// |
| /// [paper]: http://www.cs.columbia.edu/~nahum/w6998/papers/ton97-timing-wheels.pdf |
| /// [sleep]: crate::time::Sleep |
| /// [timeout]: crate::time::Timeout |
| /// [interval]: crate::time::Interval |
| #[derive(Debug)] |
| pub(crate) struct Driver { |
| /// Parker to delegate to. |
| park: IoStack, |
| } |
| |
| /// Timer state shared between `Driver`, `Handle`, and `Registration`. |
| struct Inner { |
| // The state is split like this so `Handle` can access `is_shutdown` without locking the mutex |
| pub(super) state: Mutex<InnerState>, |
| |
| /// True if the driver is being shutdown. |
| pub(super) is_shutdown: AtomicBool, |
| |
| // When `true`, a call to `park_timeout` should immediately return and time |
| // should not advance. One reason for this to be `true` is if the task |
| // passed to `Runtime::block_on` called `task::yield_now()`. |
| // |
| // While it may look racy, it only has any effect when the clock is paused |
| // and pausing the clock is restricted to a single-threaded runtime. |
| #[cfg(feature = "test-util")] |
| did_wake: AtomicBool, |
| } |
| |
| /// Time state shared which must be protected by a `Mutex` |
| struct InnerState { |
| /// The last published timer `elapsed` value. |
| elapsed: u64, |
| |
| /// The earliest time at which we promise to wake up without unparking. |
| next_wake: Option<NonZeroU64>, |
| |
| /// Timer wheel. |
| wheel: wheel::Wheel, |
| } |
| |
| // ===== impl Driver ===== |
| |
| impl Driver { |
| /// Creates a new `Driver` instance that uses `park` to block the current |
| /// thread and `time_source` to get the current time and convert to ticks. |
| /// |
| /// Specifying the source of time is useful when testing. |
| pub(crate) fn new(park: IoStack, clock: &Clock) -> (Driver, Handle) { |
| let time_source = TimeSource::new(clock); |
| |
| let handle = Handle { |
| time_source, |
| inner: Inner { |
| state: Mutex::new(InnerState { |
| elapsed: 0, |
| next_wake: None, |
| wheel: wheel::Wheel::new(), |
| }), |
| is_shutdown: AtomicBool::new(false), |
| |
| #[cfg(feature = "test-util")] |
| did_wake: AtomicBool::new(false), |
| }, |
| }; |
| |
| let driver = Driver { park }; |
| |
| (driver, handle) |
| } |
| |
| pub(crate) fn park(&mut self, handle: &driver::Handle) { |
| self.park_internal(handle, None) |
| } |
| |
| pub(crate) fn park_timeout(&mut self, handle: &driver::Handle, duration: Duration) { |
| self.park_internal(handle, Some(duration)) |
| } |
| |
| pub(crate) fn shutdown(&mut self, rt_handle: &driver::Handle) { |
| let handle = rt_handle.time(); |
| |
| if handle.is_shutdown() { |
| return; |
| } |
| |
| handle.inner.is_shutdown.store(true, Ordering::SeqCst); |
| |
| // Advance time forward to the end of time. |
| |
| handle.process_at_time(u64::MAX); |
| |
| self.park.shutdown(rt_handle); |
| } |
| |
| fn park_internal(&mut self, rt_handle: &driver::Handle, limit: Option<Duration>) { |
| let handle = rt_handle.time(); |
| let mut lock = handle.inner.state.lock(); |
| |
| assert!(!handle.is_shutdown()); |
| |
| let next_wake = lock.wheel.next_expiration_time(); |
| lock.next_wake = |
| next_wake.map(|t| NonZeroU64::new(t).unwrap_or_else(|| NonZeroU64::new(1).unwrap())); |
| |
| drop(lock); |
| |
| match next_wake { |
| Some(when) => { |
| let now = handle.time_source.now(rt_handle.clock()); |
| // Note that we effectively round up to 1ms here - this avoids |
| // very short-duration microsecond-resolution sleeps that the OS |
| // might treat as zero-length. |
| let mut duration = handle |
| .time_source |
| .tick_to_duration(when.saturating_sub(now)); |
| |
| if duration > Duration::from_millis(0) { |
| if let Some(limit) = limit { |
| duration = std::cmp::min(limit, duration); |
| } |
| |
| self.park_thread_timeout(rt_handle, duration); |
| } else { |
| self.park.park_timeout(rt_handle, Duration::from_secs(0)); |
| } |
| } |
| None => { |
| if let Some(duration) = limit { |
| self.park_thread_timeout(rt_handle, duration); |
| } else { |
| self.park.park(rt_handle); |
| } |
| } |
| } |
| |
| // Process pending timers after waking up |
| handle.process(rt_handle.clock()); |
| } |
| |
| cfg_test_util! { |
| fn park_thread_timeout(&mut self, rt_handle: &driver::Handle, duration: Duration) { |
| let handle = rt_handle.time(); |
| let clock = rt_handle.clock(); |
| |
| if clock.can_auto_advance() { |
| self.park.park_timeout(rt_handle, Duration::from_secs(0)); |
| |
| // If the time driver was woken, then the park completed |
| // before the "duration" elapsed (usually caused by a |
| // yield in `Runtime::block_on`). In this case, we don't |
| // advance the clock. |
| if !handle.did_wake() { |
| // Simulate advancing time |
| if let Err(msg) = clock.advance(duration) { |
| panic!("{}", msg); |
| } |
| } |
| } else { |
| self.park.park_timeout(rt_handle, duration); |
| } |
| } |
| } |
| |
| cfg_not_test_util! { |
| fn park_thread_timeout(&mut self, rt_handle: &driver::Handle, duration: Duration) { |
| self.park.park_timeout(rt_handle, duration); |
| } |
| } |
| } |
| |
| impl Handle { |
| /// Runs timer related logic, and returns the next wakeup time |
| pub(self) fn process(&self, clock: &Clock) { |
| let now = self.time_source().now(clock); |
| |
| self.process_at_time(now) |
| } |
| |
| pub(self) fn process_at_time(&self, mut now: u64) { |
| let mut waker_list: [Option<Waker>; 32] = Default::default(); |
| let mut waker_idx = 0; |
| |
| let mut lock = self.inner.lock(); |
| |
| if now < lock.elapsed { |
| // Time went backwards! This normally shouldn't happen as the Rust language |
| // guarantees that an Instant is monotonic, but can happen when running |
| // Linux in a VM on a Windows host due to std incorrectly trusting the |
| // hardware clock to be monotonic. |
| // |
| // See <https://github.com/tokio-rs/tokio/issues/3619> for more information. |
| now = lock.elapsed; |
| } |
| |
| while let Some(entry) = lock.wheel.poll(now) { |
| debug_assert!(unsafe { entry.is_pending() }); |
| |
| // SAFETY: We hold the driver lock, and just removed the entry from any linked lists. |
| if let Some(waker) = unsafe { entry.fire(Ok(())) } { |
| waker_list[waker_idx] = Some(waker); |
| |
| waker_idx += 1; |
| |
| if waker_idx == waker_list.len() { |
| // Wake a batch of wakers. To avoid deadlock, we must do this with the lock temporarily dropped. |
| drop(lock); |
| |
| for waker in waker_list.iter_mut() { |
| waker.take().unwrap().wake(); |
| } |
| |
| waker_idx = 0; |
| |
| lock = self.inner.lock(); |
| } |
| } |
| } |
| |
| // Update the elapsed cache |
| lock.elapsed = lock.wheel.elapsed(); |
| lock.next_wake = lock |
| .wheel |
| .poll_at() |
| .map(|t| NonZeroU64::new(t).unwrap_or_else(|| NonZeroU64::new(1).unwrap())); |
| |
| drop(lock); |
| |
| for waker in waker_list[0..waker_idx].iter_mut() { |
| waker.take().unwrap().wake(); |
| } |
| } |
| |
| /// Removes a registered timer from the driver. |
| /// |
| /// The timer will be moved to the cancelled state. Wakers will _not_ be |
| /// invoked. If the timer is already completed, this function is a no-op. |
| /// |
| /// This function always acquires the driver lock, even if the entry does |
| /// not appear to be registered. |
| /// |
| /// SAFETY: The timer must not be registered with some other driver, and |
| /// `add_entry` must not be called concurrently. |
| pub(self) unsafe fn clear_entry(&self, entry: NonNull<TimerShared>) { |
| unsafe { |
| let mut lock = self.inner.lock(); |
| |
| if entry.as_ref().might_be_registered() { |
| lock.wheel.remove(entry); |
| } |
| |
| entry.as_ref().handle().fire(Ok(())); |
| } |
| } |
| |
| /// Removes and re-adds an entry to the driver. |
| /// |
| /// SAFETY: The timer must be either unregistered, or registered with this |
| /// driver. No other threads are allowed to concurrently manipulate the |
| /// timer at all (the current thread should hold an exclusive reference to |
| /// the `TimerEntry`) |
| pub(self) unsafe fn reregister( |
| &self, |
| unpark: &IoHandle, |
| new_tick: u64, |
| entry: NonNull<TimerShared>, |
| ) { |
| let waker = unsafe { |
| let mut lock = self.inner.lock(); |
| |
| // We may have raced with a firing/deregistration, so check before |
| // deregistering. |
| if unsafe { entry.as_ref().might_be_registered() } { |
| lock.wheel.remove(entry); |
| } |
| |
| // Now that we have exclusive control of this entry, mint a handle to reinsert it. |
| let entry = entry.as_ref().handle(); |
| |
| if self.is_shutdown() { |
| unsafe { entry.fire(Err(crate::time::error::Error::shutdown())) } |
| } else { |
| entry.set_expiration(new_tick); |
| |
| // Note: We don't have to worry about racing with some other resetting |
| // thread, because add_entry and reregister require exclusive control of |
| // the timer entry. |
| match unsafe { lock.wheel.insert(entry) } { |
| Ok(when) => { |
| if lock |
| .next_wake |
| .map(|next_wake| when < next_wake.get()) |
| .unwrap_or(true) |
| { |
| unpark.unpark(); |
| } |
| |
| None |
| } |
| Err((entry, crate::time::error::InsertError::Elapsed)) => unsafe { |
| entry.fire(Ok(())) |
| }, |
| } |
| } |
| |
| // Must release lock before invoking waker to avoid the risk of deadlock. |
| }; |
| |
| // The timer was fired synchronously as a result of the reregistration. |
| // Wake the waker; this is needed because we might reset _after_ a poll, |
| // and otherwise the task won't be awoken to poll again. |
| if let Some(waker) = waker { |
| waker.wake(); |
| } |
| } |
| |
| cfg_test_util! { |
| fn did_wake(&self) -> bool { |
| self.inner.did_wake.swap(false, Ordering::SeqCst) |
| } |
| } |
| } |
| |
| // ===== impl Inner ===== |
| |
| impl Inner { |
| /// Locks the driver's inner structure |
| pub(super) fn lock(&self) -> crate::loom::sync::MutexGuard<'_, InnerState> { |
| self.state.lock() |
| } |
| |
| // Check whether the driver has been shutdown |
| pub(super) fn is_shutdown(&self) -> bool { |
| self.is_shutdown.load(Ordering::SeqCst) |
| } |
| } |
| |
| impl fmt::Debug for Inner { |
| fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt.debug_struct("Inner").finish() |
| } |
| } |
| |
| #[cfg(test)] |
| mod tests; |