| /* inflate.c -- zlib decompression | |
| * Copyright (C) 1995-2016 Mark Adler | |
| * For conditions of distribution and use, see copyright notice in zlib.h | |
| */ | |
| #include "zbuild.h" | |
| #include "zutil.h" | |
| #include "cpu_features.h" | |
| #include "inftrees.h" | |
| #include "inflate.h" | |
| #include "inffast.h" | |
| #include "inflate_p.h" | |
| #include "inffixed_tbl.h" | |
| #include "functable.h" | |
| /* function prototypes */ | |
| static int inflateStateCheck(PREFIX3(stream) *strm); | |
| static int updatewindow(PREFIX3(stream) *strm, const uint8_t *end, uint32_t len, int32_t cksum); | |
| static uint32_t syncsearch(uint32_t *have, const unsigned char *buf, uint32_t len); | |
| static inline void inf_chksum_cpy(PREFIX3(stream) *strm, uint8_t *dst, | |
| const uint8_t *src, uint32_t copy) { | |
| if (!copy) return; | |
| struct inflate_state *state = (struct inflate_state*)strm->state; | |
| #ifdef GUNZIP | |
| if (state->flags) { | |
| functable.crc32_fold_copy(&state->crc_fold, dst, src, copy); | |
| } else | |
| #endif | |
| { | |
| strm->adler = state->check = functable.adler32_fold_copy(state->check, dst, src, copy); | |
| } | |
| } | |
| static inline void inf_chksum(PREFIX3(stream) *strm, const uint8_t *src, uint32_t len) { | |
| struct inflate_state *state = (struct inflate_state*)strm->state; | |
| #ifdef GUNZIP | |
| if (state->flags) { | |
| functable.crc32_fold(&state->crc_fold, src, len, 0); | |
| } else | |
| #endif | |
| { | |
| strm->adler = state->check = functable.adler32(state->check, src, len); | |
| } | |
| } | |
| static int inflateStateCheck(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (strm == NULL || strm->zalloc == NULL || strm->zfree == NULL) | |
| return 1; | |
| state = (struct inflate_state *)strm->state; | |
| if (state == NULL || state->strm != strm || state->mode < HEAD || state->mode > SYNC) | |
| return 1; | |
| return 0; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateResetKeep)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| strm->total_in = strm->total_out = state->total = 0; | |
| strm->msg = NULL; | |
| if (state->wrap) /* to support ill-conceived Java test suite */ | |
| strm->adler = state->wrap & 1; | |
| state->mode = HEAD; | |
| state->check = ADLER32_INITIAL_VALUE; | |
| state->last = 0; | |
| state->havedict = 0; | |
| state->flags = -1; | |
| state->dmax = 32768U; | |
| state->head = NULL; | |
| state->hold = 0; | |
| state->bits = 0; | |
| state->lencode = state->distcode = state->next = state->codes; | |
| state->sane = 1; | |
| state->back = -1; | |
| INFLATE_RESET_KEEP_HOOK(strm); /* hook for IBM Z DFLTCC */ | |
| Tracev((stderr, "inflate: reset\n")); | |
| return Z_OK; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateReset)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| state->wsize = 0; | |
| state->whave = 0; | |
| state->wnext = 0; | |
| return PREFIX(inflateResetKeep)(strm); | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateReset2)(PREFIX3(stream) *strm, int32_t windowBits) { | |
| int wrap; | |
| struct inflate_state *state; | |
| /* get the state */ | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| /* extract wrap request from windowBits parameter */ | |
| if (windowBits < 0) { | |
| wrap = 0; | |
| windowBits = -windowBits; | |
| } else { | |
| wrap = (windowBits >> 4) + 5; | |
| #ifdef GUNZIP | |
| if (windowBits < 48) | |
| windowBits &= 15; | |
| #endif | |
| } | |
| /* set number of window bits, free window if different */ | |
| if (windowBits && (windowBits < 8 || windowBits > 15)) | |
| return Z_STREAM_ERROR; | |
| if (state->window != NULL && state->wbits != (unsigned)windowBits) { | |
| ZFREE_WINDOW(strm, state->window); | |
| state->window = NULL; | |
| } | |
| /* update state and reset the rest of it */ | |
| state->wrap = wrap; | |
| state->wbits = (unsigned)windowBits; | |
| return PREFIX(inflateReset)(strm); | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateInit2_)(PREFIX3(stream) *strm, int32_t windowBits, const char *version, int32_t stream_size) { | |
| int32_t ret; | |
| struct inflate_state *state; | |
| cpu_check_features(); | |
| if (version == NULL || version[0] != PREFIX2(VERSION)[0] || stream_size != (int)(sizeof(PREFIX3(stream)))) | |
| return Z_VERSION_ERROR; | |
| if (strm == NULL) | |
| return Z_STREAM_ERROR; | |
| strm->msg = NULL; /* in case we return an error */ | |
| if (strm->zalloc == NULL) { | |
| strm->zalloc = zng_calloc; | |
| strm->opaque = NULL; | |
| } | |
| if (strm->zfree == NULL) | |
| strm->zfree = zng_cfree; | |
| state = ZALLOC_INFLATE_STATE(strm); | |
| if (state == NULL) | |
| return Z_MEM_ERROR; | |
| Tracev((stderr, "inflate: allocated\n")); | |
| strm->state = (struct internal_state *)state; | |
| state->strm = strm; | |
| state->window = NULL; | |
| state->mode = HEAD; /* to pass state test in inflateReset2() */ | |
| state->chunksize = functable.chunksize(); | |
| ret = PREFIX(inflateReset2)(strm, windowBits); | |
| if (ret != Z_OK) { | |
| ZFREE_STATE(strm, state); | |
| strm->state = NULL; | |
| } | |
| return ret; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateInit_)(PREFIX3(stream) *strm, const char *version, int32_t stream_size) { | |
| return PREFIX(inflateInit2_)(strm, DEF_WBITS, version, stream_size); | |
| } | |
| int32_t Z_EXPORT PREFIX(inflatePrime)(PREFIX3(stream) *strm, int32_t bits, int32_t value) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| INFLATE_PRIME_HOOK(strm, bits, value); /* hook for IBM Z DFLTCC */ | |
| state = (struct inflate_state *)strm->state; | |
| if (bits < 0) { | |
| state->hold = 0; | |
| state->bits = 0; | |
| return Z_OK; | |
| } | |
| if (bits > 16 || state->bits + (unsigned int)bits > 32) | |
| return Z_STREAM_ERROR; | |
| value &= (1L << bits) - 1; | |
| state->hold += (unsigned)value << state->bits; | |
| state->bits += (unsigned int)bits; | |
| return Z_OK; | |
| } | |
| /* | |
| Return state with length and distance decoding tables and index sizes set to | |
| fixed code decoding. This returns fixed tables from inffixed_tbl.h. | |
| */ | |
| void Z_INTERNAL fixedtables(struct inflate_state *state) { | |
| state->lencode = lenfix; | |
| state->lenbits = 9; | |
| state->distcode = distfix; | |
| state->distbits = 5; | |
| } | |
| int Z_INTERNAL PREFIX(inflate_ensure_window)(struct inflate_state *state) { | |
| /* if it hasn't been done already, allocate space for the window */ | |
| if (state->window == NULL) { | |
| unsigned wsize = 1U << state->wbits; | |
| state->window = (unsigned char *)ZALLOC_WINDOW(state->strm, wsize + state->chunksize, sizeof(unsigned char)); | |
| if (state->window == NULL) | |
| return Z_MEM_ERROR; | |
| #ifdef Z_MEMORY_SANITIZER | |
| /* This is _not_ to subvert the memory sanitizer but to instead unposion some | |
| data we willingly and purposefully load uninitialized into vector registers | |
| in order to safely read the last < chunksize bytes of the window. */ | |
| __msan_unpoison(state->window + wsize, state->chunksize); | |
| #endif | |
| } | |
| /* if window not in use yet, initialize */ | |
| if (state->wsize == 0) { | |
| state->wsize = 1U << state->wbits; | |
| state->wnext = 0; | |
| state->whave = 0; | |
| } | |
| return Z_OK; | |
| } | |
| /* | |
| Update the window with the last wsize (normally 32K) bytes written before | |
| returning. If window does not exist yet, create it. This is only called | |
| when a window is already in use, or when output has been written during this | |
| inflate call, but the end of the deflate stream has not been reached yet. | |
| It is also called to create a window for dictionary data when a dictionary | |
| is loaded. | |
| Providing output buffers larger than 32K to inflate() should provide a speed | |
| advantage, since only the last 32K of output is copied to the sliding window | |
| upon return from inflate(), and since all distances after the first 32K of | |
| output will fall in the output data, making match copies simpler and faster. | |
| The advantage may be dependent on the size of the processor's data caches. | |
| */ | |
| static int32_t updatewindow(PREFIX3(stream) *strm, const uint8_t *end, uint32_t len, int32_t cksum) { | |
| struct inflate_state *state; | |
| uint32_t dist; | |
| state = (struct inflate_state *)strm->state; | |
| if (PREFIX(inflate_ensure_window)(state)) return 1; | |
| /* len state->wsize or less output bytes into the circular window */ | |
| if (len >= state->wsize) { | |
| /* Only do this if the caller specifies to checksum bytes AND the platform requires | |
| * it (s/390 being the primary exception to this. Also, for now, do the adler checksums | |
| * if not a gzip based header. The inline adler checksums will come in the near future, | |
| * possibly the next commit */ | |
| if (INFLATE_NEED_CHECKSUM(strm) && cksum) { | |
| /* We have to split the checksum over non-copied and copied bytes */ | |
| if (len > state->wsize) | |
| inf_chksum(strm, end - len, len - state->wsize); | |
| inf_chksum_cpy(strm, state->window, end - state->wsize, state->wsize); | |
| } else { | |
| memcpy(state->window, end - state->wsize, state->wsize); | |
| } | |
| state->wnext = 0; | |
| state->whave = state->wsize; | |
| } else { | |
| dist = state->wsize - state->wnext; | |
| /* Only do this if the caller specifies to checksum bytes AND the platform requires | |
| * We need to maintain the correct order here for the checksum */ | |
| dist = MIN(dist, len); | |
| if (INFLATE_NEED_CHECKSUM(strm) && cksum) { | |
| inf_chksum_cpy(strm, state->window + state->wnext, end - len, dist); | |
| } else { | |
| memcpy(state->window + state->wnext, end - len, dist); | |
| } | |
| len -= dist; | |
| if (len) { | |
| if (INFLATE_NEED_CHECKSUM(strm) && cksum) { | |
| inf_chksum_cpy(strm, state->window, end - len, len); | |
| } else { | |
| memcpy(state->window, end - len, len); | |
| } | |
| state->wnext = len; | |
| state->whave = state->wsize; | |
| } else { | |
| state->wnext += dist; | |
| if (state->wnext == state->wsize) | |
| state->wnext = 0; | |
| if (state->whave < state->wsize) | |
| state->whave += dist; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| Private macros for inflate() | |
| Look in inflate_p.h for macros shared with inflateBack() | |
| */ | |
| /* Get a byte of input into the bit accumulator, or return from inflate() if there is no input available. */ | |
| #define PULLBYTE() \ | |
| do { \ | |
| if (have == 0) goto inf_leave; \ | |
| have--; \ | |
| hold += ((unsigned)(*next++) << bits); \ | |
| bits += 8; \ | |
| } while (0) | |
| /* | |
| inflate() uses a state machine to process as much input data and generate as | |
| much output data as possible before returning. The state machine is | |
| structured roughly as follows: | |
| for (;;) switch (state) { | |
| ... | |
| case STATEn: | |
| if (not enough input data or output space to make progress) | |
| return; | |
| ... make progress ... | |
| state = STATEm; | |
| break; | |
| ... | |
| } | |
| so when inflate() is called again, the same case is attempted again, and | |
| if the appropriate resources are provided, the machine proceeds to the | |
| next state. The NEEDBITS() macro is usually the way the state evaluates | |
| whether it can proceed or should return. NEEDBITS() does the return if | |
| the requested bits are not available. The typical use of the BITS macros | |
| is: | |
| NEEDBITS(n); | |
| ... do something with BITS(n) ... | |
| DROPBITS(n); | |
| where NEEDBITS(n) either returns from inflate() if there isn't enough | |
| input left to load n bits into the accumulator, or it continues. BITS(n) | |
| gives the low n bits in the accumulator. When done, DROPBITS(n) drops | |
| the low n bits off the accumulator. INITBITS() clears the accumulator | |
| and sets the number of available bits to zero. BYTEBITS() discards just | |
| enough bits to put the accumulator on a byte boundary. After BYTEBITS() | |
| and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. | |
| NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return | |
| if there is no input available. The decoding of variable length codes uses | |
| PULLBYTE() directly in order to pull just enough bytes to decode the next | |
| code, and no more. | |
| Some states loop until they get enough input, making sure that enough | |
| state information is maintained to continue the loop where it left off | |
| if NEEDBITS() returns in the loop. For example, want, need, and keep | |
| would all have to actually be part of the saved state in case NEEDBITS() | |
| returns: | |
| case STATEw: | |
| while (want < need) { | |
| NEEDBITS(n); | |
| keep[want++] = BITS(n); | |
| DROPBITS(n); | |
| } | |
| state = STATEx; | |
| case STATEx: | |
| As shown above, if the next state is also the next case, then the break | |
| is omitted. | |
| A state may also return if there is not enough output space available to | |
| complete that state. Those states are copying stored data, writing a | |
| literal byte, and copying a matching string. | |
| When returning, a "goto inf_leave" is used to update the total counters, | |
| update the check value, and determine whether any progress has been made | |
| during that inflate() call in order to return the proper return code. | |
| Progress is defined as a change in either strm->avail_in or strm->avail_out. | |
| When there is a window, goto inf_leave will update the window with the last | |
| output written. If a goto inf_leave occurs in the middle of decompression | |
| and there is no window currently, goto inf_leave will create one and copy | |
| output to the window for the next call of inflate(). | |
| In this implementation, the flush parameter of inflate() only affects the | |
| return code (per zlib.h). inflate() always writes as much as possible to | |
| strm->next_out, given the space available and the provided input--the effect | |
| documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers | |
| the allocation of and copying into a sliding window until necessary, which | |
| provides the effect documented in zlib.h for Z_FINISH when the entire input | |
| stream available. So the only thing the flush parameter actually does is: | |
| when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it | |
| will return Z_BUF_ERROR if it has not reached the end of the stream. | |
| */ | |
| int32_t Z_EXPORT PREFIX(inflate)(PREFIX3(stream) *strm, int32_t flush) { | |
| struct inflate_state *state; | |
| const unsigned char *next; /* next input */ | |
| unsigned char *put; /* next output */ | |
| unsigned have, left; /* available input and output */ | |
| uint32_t hold; /* bit buffer */ | |
| unsigned bits; /* bits in bit buffer */ | |
| uint32_t in, out; /* save starting available input and output */ | |
| unsigned copy; /* number of stored or match bytes to copy */ | |
| unsigned char *from; /* where to copy match bytes from */ | |
| code here; /* current decoding table entry */ | |
| code last; /* parent table entry */ | |
| unsigned len; /* length to copy for repeats, bits to drop */ | |
| int32_t ret; /* return code */ | |
| #ifdef GUNZIP | |
| unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ | |
| #endif | |
| static const uint16_t order[19] = /* permutation of code lengths */ | |
| {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; | |
| if (inflateStateCheck(strm) || strm->next_out == NULL || | |
| (strm->next_in == NULL && strm->avail_in != 0)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if (state->mode == TYPE) /* skip check */ | |
| state->mode = TYPEDO; | |
| LOAD(); | |
| in = have; | |
| out = left; | |
| ret = Z_OK; | |
| for (;;) | |
| switch (state->mode) { | |
| case HEAD: | |
| if (state->wrap == 0) { | |
| state->mode = TYPEDO; | |
| break; | |
| } | |
| NEEDBITS(16); | |
| #ifdef GUNZIP | |
| if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ | |
| if (state->wbits == 0) | |
| state->wbits = 15; | |
| state->check = CRC32_INITIAL_VALUE; | |
| CRC2(state->check, hold); | |
| INITBITS(); | |
| state->mode = FLAGS; | |
| break; | |
| } | |
| if (state->head != NULL) | |
| state->head->done = -1; | |
| if (!(state->wrap & 1) || /* check if zlib header allowed */ | |
| #else | |
| if ( | |
| #endif | |
| ((BITS(8) << 8) + (hold >> 8)) % 31) { | |
| SET_BAD("incorrect header check"); | |
| break; | |
| } | |
| if (BITS(4) != Z_DEFLATED) { | |
| SET_BAD("unknown compression method"); | |
| break; | |
| } | |
| DROPBITS(4); | |
| len = BITS(4) + 8; | |
| if (state->wbits == 0) | |
| state->wbits = len; | |
| if (len > 15 || len > state->wbits) { | |
| SET_BAD("invalid window size"); | |
| break; | |
| } | |
| state->dmax = 1U << len; | |
| state->flags = 0; /* indicate zlib header */ | |
| Tracev((stderr, "inflate: zlib header ok\n")); | |
| strm->adler = state->check = ADLER32_INITIAL_VALUE; | |
| state->mode = hold & 0x200 ? DICTID : TYPE; | |
| INITBITS(); | |
| break; | |
| #ifdef GUNZIP | |
| case FLAGS: | |
| NEEDBITS(16); | |
| state->flags = (int)(hold); | |
| if ((state->flags & 0xff) != Z_DEFLATED) { | |
| SET_BAD("unknown compression method"); | |
| break; | |
| } | |
| if (state->flags & 0xe000) { | |
| SET_BAD("unknown header flags set"); | |
| break; | |
| } | |
| if (state->head != NULL) | |
| state->head->text = (int)((hold >> 8) & 1); | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| CRC2(state->check, hold); | |
| INITBITS(); | |
| state->mode = TIME; | |
| case TIME: | |
| NEEDBITS(32); | |
| if (state->head != NULL) | |
| state->head->time = hold; | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| CRC4(state->check, hold); | |
| INITBITS(); | |
| state->mode = OS; | |
| case OS: | |
| NEEDBITS(16); | |
| if (state->head != NULL) { | |
| state->head->xflags = (int)(hold & 0xff); | |
| state->head->os = (int)(hold >> 8); | |
| } | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| CRC2(state->check, hold); | |
| INITBITS(); | |
| state->mode = EXLEN; | |
| case EXLEN: | |
| if (state->flags & 0x0400) { | |
| NEEDBITS(16); | |
| state->length = (uint16_t)hold; | |
| if (state->head != NULL) | |
| state->head->extra_len = (uint16_t)hold; | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| CRC2(state->check, hold); | |
| INITBITS(); | |
| } else if (state->head != NULL) { | |
| state->head->extra = NULL; | |
| } | |
| state->mode = EXTRA; | |
| case EXTRA: | |
| if (state->flags & 0x0400) { | |
| copy = state->length; | |
| if (copy > have) | |
| copy = have; | |
| if (copy) { | |
| if (state->head != NULL && state->head->extra != NULL) { | |
| len = state->head->extra_len - state->length; | |
| memcpy(state->head->extra + len, next, | |
| len + copy > state->head->extra_max ? | |
| state->head->extra_max - len : copy); | |
| } | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) { | |
| state->check = PREFIX(crc32)(state->check, next, copy); | |
| } | |
| have -= copy; | |
| next += copy; | |
| state->length -= copy; | |
| } | |
| if (state->length) | |
| goto inf_leave; | |
| } | |
| state->length = 0; | |
| state->mode = NAME; | |
| case NAME: | |
| if (state->flags & 0x0800) { | |
| if (have == 0) goto inf_leave; | |
| copy = 0; | |
| do { | |
| len = (unsigned)(next[copy++]); | |
| if (state->head != NULL && state->head->name != NULL && state->length < state->head->name_max) | |
| state->head->name[state->length++] = (unsigned char)len; | |
| } while (len && copy < have); | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| state->check = PREFIX(crc32)(state->check, next, copy); | |
| have -= copy; | |
| next += copy; | |
| if (len) | |
| goto inf_leave; | |
| } else if (state->head != NULL) { | |
| state->head->name = NULL; | |
| } | |
| state->length = 0; | |
| state->mode = COMMENT; | |
| case COMMENT: | |
| if (state->flags & 0x1000) { | |
| if (have == 0) goto inf_leave; | |
| copy = 0; | |
| do { | |
| len = (unsigned)(next[copy++]); | |
| if (state->head != NULL && state->head->comment != NULL | |
| && state->length < state->head->comm_max) | |
| state->head->comment[state->length++] = (unsigned char)len; | |
| } while (len && copy < have); | |
| if ((state->flags & 0x0200) && (state->wrap & 4)) | |
| state->check = PREFIX(crc32)(state->check, next, copy); | |
| have -= copy; | |
| next += copy; | |
| if (len) | |
| goto inf_leave; | |
| } else if (state->head != NULL) { | |
| state->head->comment = NULL; | |
| } | |
| state->mode = HCRC; | |
| case HCRC: | |
| if (state->flags & 0x0200) { | |
| NEEDBITS(16); | |
| if ((state->wrap & 4) && hold != (state->check & 0xffff)) { | |
| SET_BAD("header crc mismatch"); | |
| break; | |
| } | |
| INITBITS(); | |
| } | |
| if (state->head != NULL) { | |
| state->head->hcrc = (int)((state->flags >> 9) & 1); | |
| state->head->done = 1; | |
| } | |
| /* compute crc32 checksum if not in raw mode */ | |
| if ((state->wrap & 4) && state->flags) | |
| strm->adler = state->check = functable.crc32_fold_reset(&state->crc_fold); | |
| state->mode = TYPE; | |
| break; | |
| #endif | |
| case DICTID: | |
| NEEDBITS(32); | |
| strm->adler = state->check = ZSWAP32(hold); | |
| INITBITS(); | |
| state->mode = DICT; | |
| case DICT: | |
| if (state->havedict == 0) { | |
| RESTORE(); | |
| return Z_NEED_DICT; | |
| } | |
| strm->adler = state->check = ADLER32_INITIAL_VALUE; | |
| state->mode = TYPE; | |
| case TYPE: | |
| if (flush == Z_BLOCK || flush == Z_TREES) | |
| goto inf_leave; | |
| case TYPEDO: | |
| /* determine and dispatch block type */ | |
| INFLATE_TYPEDO_HOOK(strm, flush); /* hook for IBM Z DFLTCC */ | |
| if (state->last) { | |
| BYTEBITS(); | |
| state->mode = CHECK; | |
| break; | |
| } | |
| NEEDBITS(3); | |
| state->last = BITS(1); | |
| DROPBITS(1); | |
| switch (BITS(2)) { | |
| case 0: /* stored block */ | |
| Tracev((stderr, "inflate: stored block%s\n", state->last ? " (last)" : "")); | |
| state->mode = STORED; | |
| break; | |
| case 1: /* fixed block */ | |
| fixedtables(state); | |
| Tracev((stderr, "inflate: fixed codes block%s\n", state->last ? " (last)" : "")); | |
| state->mode = LEN_; /* decode codes */ | |
| if (flush == Z_TREES) { | |
| DROPBITS(2); | |
| goto inf_leave; | |
| } | |
| break; | |
| case 2: /* dynamic block */ | |
| Tracev((stderr, "inflate: dynamic codes block%s\n", state->last ? " (last)" : "")); | |
| state->mode = TABLE; | |
| break; | |
| case 3: | |
| SET_BAD("invalid block type"); | |
| } | |
| DROPBITS(2); | |
| break; | |
| case STORED: | |
| /* get and verify stored block length */ | |
| BYTEBITS(); /* go to byte boundary */ | |
| NEEDBITS(32); | |
| if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { | |
| SET_BAD("invalid stored block lengths"); | |
| break; | |
| } | |
| state->length = (uint16_t)hold; | |
| Tracev((stderr, "inflate: stored length %u\n", state->length)); | |
| INITBITS(); | |
| state->mode = COPY_; | |
| if (flush == Z_TREES) | |
| goto inf_leave; | |
| case COPY_: | |
| state->mode = COPY; | |
| case COPY: | |
| /* copy stored block from input to output */ | |
| copy = state->length; | |
| if (copy) { | |
| copy = MIN(copy, have); | |
| copy = MIN(copy, left); | |
| if (copy == 0) | |
| goto inf_leave; | |
| memcpy(put, next, copy); | |
| have -= copy; | |
| next += copy; | |
| left -= copy; | |
| put += copy; | |
| state->length -= copy; | |
| break; | |
| } | |
| Tracev((stderr, "inflate: stored end\n")); | |
| state->mode = TYPE; | |
| break; | |
| case TABLE: | |
| /* get dynamic table entries descriptor */ | |
| NEEDBITS(14); | |
| state->nlen = BITS(5) + 257; | |
| DROPBITS(5); | |
| state->ndist = BITS(5) + 1; | |
| DROPBITS(5); | |
| state->ncode = BITS(4) + 4; | |
| DROPBITS(4); | |
| #ifndef PKZIP_BUG_WORKAROUND | |
| if (state->nlen > 286 || state->ndist > 30) { | |
| SET_BAD("too many length or distance symbols"); | |
| break; | |
| } | |
| #endif | |
| Tracev((stderr, "inflate: table sizes ok\n")); | |
| state->have = 0; | |
| state->mode = LENLENS; | |
| case LENLENS: | |
| /* get code length code lengths (not a typo) */ | |
| while (state->have < state->ncode) { | |
| NEEDBITS(3); | |
| state->lens[order[state->have++]] = (uint16_t)BITS(3); | |
| DROPBITS(3); | |
| } | |
| while (state->have < 19) | |
| state->lens[order[state->have++]] = 0; | |
| state->next = state->codes; | |
| state->lencode = (const code *)(state->next); | |
| state->lenbits = 7; | |
| ret = zng_inflate_table(CODES, state->lens, 19, &(state->next), &(state->lenbits), state->work); | |
| if (ret) { | |
| SET_BAD("invalid code lengths set"); | |
| break; | |
| } | |
| Tracev((stderr, "inflate: code lengths ok\n")); | |
| state->have = 0; | |
| state->mode = CODELENS; | |
| case CODELENS: | |
| /* get length and distance code code lengths */ | |
| while (state->have < state->nlen + state->ndist) { | |
| for (;;) { | |
| here = state->lencode[BITS(state->lenbits)]; | |
| if (here.bits <= bits) break; | |
| PULLBYTE(); | |
| } | |
| if (here.val < 16) { | |
| DROPBITS(here.bits); | |
| state->lens[state->have++] = here.val; | |
| } else { | |
| if (here.val == 16) { | |
| NEEDBITS(here.bits + 2); | |
| DROPBITS(here.bits); | |
| if (state->have == 0) { | |
| SET_BAD("invalid bit length repeat"); | |
| break; | |
| } | |
| len = state->lens[state->have - 1]; | |
| copy = 3 + BITS(2); | |
| DROPBITS(2); | |
| } else if (here.val == 17) { | |
| NEEDBITS(here.bits + 3); | |
| DROPBITS(here.bits); | |
| len = 0; | |
| copy = 3 + BITS(3); | |
| DROPBITS(3); | |
| } else { | |
| NEEDBITS(here.bits + 7); | |
| DROPBITS(here.bits); | |
| len = 0; | |
| copy = 11 + BITS(7); | |
| DROPBITS(7); | |
| } | |
| if (state->have + copy > state->nlen + state->ndist) { | |
| SET_BAD("invalid bit length repeat"); | |
| break; | |
| } | |
| while (copy) { | |
| --copy; | |
| state->lens[state->have++] = (uint16_t)len; | |
| } | |
| } | |
| } | |
| /* handle error breaks in while */ | |
| if (state->mode == BAD) | |
| break; | |
| /* check for end-of-block code (better have one) */ | |
| if (state->lens[256] == 0) { | |
| SET_BAD("invalid code -- missing end-of-block"); | |
| break; | |
| } | |
| /* build code tables -- note: do not change the lenbits or distbits | |
| values here (9 and 6) without reading the comments in inftrees.h | |
| concerning the ENOUGH constants, which depend on those values */ | |
| state->next = state->codes; | |
| state->lencode = (const code *)(state->next); | |
| state->lenbits = 9; | |
| ret = zng_inflate_table(LENS, state->lens, state->nlen, &(state->next), &(state->lenbits), state->work); | |
| if (ret) { | |
| SET_BAD("invalid literal/lengths set"); | |
| break; | |
| } | |
| state->distcode = (const code *)(state->next); | |
| state->distbits = 6; | |
| ret = zng_inflate_table(DISTS, state->lens + state->nlen, state->ndist, | |
| &(state->next), &(state->distbits), state->work); | |
| if (ret) { | |
| SET_BAD("invalid distances set"); | |
| break; | |
| } | |
| Tracev((stderr, "inflate: codes ok\n")); | |
| state->mode = LEN_; | |
| if (flush == Z_TREES) | |
| goto inf_leave; | |
| case LEN_: | |
| state->mode = LEN; | |
| case LEN: | |
| /* use inflate_fast() if we have enough input and output */ | |
| if (have >= INFLATE_FAST_MIN_HAVE && left >= INFLATE_FAST_MIN_LEFT) { | |
| RESTORE(); | |
| zng_inflate_fast(strm, out); | |
| LOAD(); | |
| if (state->mode == TYPE) | |
| state->back = -1; | |
| break; | |
| } | |
| state->back = 0; | |
| /* get a literal, length, or end-of-block code */ | |
| for (;;) { | |
| here = state->lencode[BITS(state->lenbits)]; | |
| if (here.bits <= bits) | |
| break; | |
| PULLBYTE(); | |
| } | |
| if (here.op && (here.op & 0xf0) == 0) { | |
| last = here; | |
| for (;;) { | |
| here = state->lencode[last.val + (BITS(last.bits + last.op) >> last.bits)]; | |
| if ((unsigned)last.bits + (unsigned)here.bits <= bits) | |
| break; | |
| PULLBYTE(); | |
| } | |
| DROPBITS(last.bits); | |
| state->back += last.bits; | |
| } | |
| DROPBITS(here.bits); | |
| state->back += here.bits; | |
| state->length = here.val; | |
| /* process literal */ | |
| if ((int)(here.op) == 0) { | |
| Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? | |
| "inflate: literal '%c'\n" : | |
| "inflate: literal 0x%02x\n", here.val)); | |
| state->mode = LIT; | |
| break; | |
| } | |
| /* process end of block */ | |
| if (here.op & 32) { | |
| Tracevv((stderr, "inflate: end of block\n")); | |
| state->back = -1; | |
| state->mode = TYPE; | |
| break; | |
| } | |
| /* invalid code */ | |
| if (here.op & 64) { | |
| SET_BAD("invalid literal/length code"); | |
| break; | |
| } | |
| /* length code */ | |
| state->extra = (here.op & 15); | |
| state->mode = LENEXT; | |
| case LENEXT: | |
| /* get extra bits, if any */ | |
| if (state->extra) { | |
| NEEDBITS(state->extra); | |
| state->length += BITS(state->extra); | |
| DROPBITS(state->extra); | |
| state->back += state->extra; | |
| } | |
| Tracevv((stderr, "inflate: length %u\n", state->length)); | |
| state->was = state->length; | |
| state->mode = DIST; | |
| case DIST: | |
| /* get distance code */ | |
| for (;;) { | |
| here = state->distcode[BITS(state->distbits)]; | |
| if (here.bits <= bits) | |
| break; | |
| PULLBYTE(); | |
| } | |
| if ((here.op & 0xf0) == 0) { | |
| last = here; | |
| for (;;) { | |
| here = state->distcode[last.val + (BITS(last.bits + last.op) >> last.bits)]; | |
| if ((unsigned)last.bits + (unsigned)here.bits <= bits) | |
| break; | |
| PULLBYTE(); | |
| } | |
| DROPBITS(last.bits); | |
| state->back += last.bits; | |
| } | |
| DROPBITS(here.bits); | |
| state->back += here.bits; | |
| if (here.op & 64) { | |
| SET_BAD("invalid distance code"); | |
| break; | |
| } | |
| state->offset = here.val; | |
| state->extra = (here.op & 15); | |
| state->mode = DISTEXT; | |
| case DISTEXT: | |
| /* get distance extra bits, if any */ | |
| if (state->extra) { | |
| NEEDBITS(state->extra); | |
| state->offset += BITS(state->extra); | |
| DROPBITS(state->extra); | |
| state->back += state->extra; | |
| } | |
| #ifdef INFLATE_STRICT | |
| if (state->offset > state->dmax) { | |
| SET_BAD("invalid distance too far back"); | |
| break; | |
| } | |
| #endif | |
| Tracevv((stderr, "inflate: distance %u\n", state->offset)); | |
| state->mode = MATCH; | |
| case MATCH: | |
| /* copy match from window to output */ | |
| if (left == 0) | |
| goto inf_leave; | |
| copy = out - left; | |
| if (state->offset > copy) { /* copy from window */ | |
| copy = state->offset - copy; | |
| if (copy > state->whave) { | |
| if (state->sane) { | |
| SET_BAD("invalid distance too far back"); | |
| break; | |
| } | |
| #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR | |
| Trace((stderr, "inflate.c too far\n")); | |
| copy -= state->whave; | |
| copy = MIN(copy, state->length); | |
| copy = MIN(copy, left); | |
| left -= copy; | |
| state->length -= copy; | |
| do { | |
| *put++ = 0; | |
| } while (--copy); | |
| if (state->length == 0) | |
| state->mode = LEN; | |
| break; | |
| #endif | |
| } | |
| if (copy > state->wnext) { | |
| copy -= state->wnext; | |
| from = state->window + (state->wsize - copy); | |
| } else { | |
| from = state->window + (state->wnext - copy); | |
| } | |
| copy = MIN(copy, state->length); | |
| copy = MIN(copy, left); | |
| put = chunkcopy_safe(put, from, copy, put + left); | |
| } else { | |
| copy = MIN(state->length, left); | |
| put = functable.chunkmemset_safe(put, state->offset, copy, left); | |
| } | |
| left -= copy; | |
| state->length -= copy; | |
| if (state->length == 0) | |
| state->mode = LEN; | |
| break; | |
| case LIT: | |
| if (left == 0) | |
| goto inf_leave; | |
| *put++ = (unsigned char)(state->length); | |
| left--; | |
| state->mode = LEN; | |
| break; | |
| case CHECK: | |
| if (state->wrap) { | |
| NEEDBITS(32); | |
| out -= left; | |
| strm->total_out += out; | |
| state->total += out; | |
| /* compute crc32 checksum if not in raw mode */ | |
| if (INFLATE_NEED_CHECKSUM(strm) && state->wrap & 4) { | |
| if (out) { | |
| inf_chksum(strm, put - out, out); | |
| } | |
| #ifdef GUNZIP | |
| if (state->flags) | |
| strm->adler = state->check = functable.crc32_fold_final(&state->crc_fold); | |
| #endif | |
| } | |
| out = left; | |
| if ((state->wrap & 4) && ( | |
| #ifdef GUNZIP | |
| state->flags ? hold : | |
| #endif | |
| ZSWAP32(hold)) != state->check) { | |
| SET_BAD("incorrect data check"); | |
| break; | |
| } | |
| INITBITS(); | |
| Tracev((stderr, "inflate: check matches trailer\n")); | |
| } | |
| #ifdef GUNZIP | |
| state->mode = LENGTH; | |
| case LENGTH: | |
| if (state->wrap && state->flags) { | |
| NEEDBITS(32); | |
| if ((state->wrap & 4) && hold != (state->total & 0xffffffff)) { | |
| SET_BAD("incorrect length check"); | |
| break; | |
| } | |
| INITBITS(); | |
| Tracev((stderr, "inflate: length matches trailer\n")); | |
| } | |
| #endif | |
| state->mode = DONE; | |
| case DONE: | |
| /* inflate stream terminated properly */ | |
| ret = Z_STREAM_END; | |
| goto inf_leave; | |
| case BAD: | |
| ret = Z_DATA_ERROR; | |
| goto inf_leave; | |
| case MEM: | |
| return Z_MEM_ERROR; | |
| case SYNC: | |
| default: /* can't happen, but makes compilers happy */ | |
| return Z_STREAM_ERROR; | |
| } | |
| /* | |
| Return from inflate(), updating the total counts and the check value. | |
| If there was no progress during the inflate() call, return a buffer | |
| error. Call updatewindow() to create and/or update the window state. | |
| Note: a memory error from inflate() is non-recoverable. | |
| */ | |
| inf_leave: | |
| RESTORE(); | |
| if (INFLATE_NEED_UPDATEWINDOW(strm) && | |
| (state->wsize || (out != strm->avail_out && state->mode < BAD && | |
| (state->mode < CHECK || flush != Z_FINISH)))) { | |
| /* update sliding window with respective checksum if not in "raw" mode */ | |
| if (updatewindow(strm, strm->next_out, out - strm->avail_out, state->wrap & 4)) { | |
| state->mode = MEM; | |
| return Z_MEM_ERROR; | |
| } | |
| } | |
| in -= strm->avail_in; | |
| out -= strm->avail_out; | |
| strm->total_in += in; | |
| strm->total_out += out; | |
| state->total += out; | |
| strm->data_type = (int)state->bits + (state->last ? 64 : 0) + | |
| (state->mode == TYPE ? 128 : 0) + (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0); | |
| if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) | |
| ret = Z_BUF_ERROR; | |
| return ret; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateEnd)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if (state->window != NULL) | |
| ZFREE_WINDOW(strm, state->window); | |
| ZFREE_STATE(strm, strm->state); | |
| strm->state = NULL; | |
| Tracev((stderr, "inflate: end\n")); | |
| return Z_OK; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateGetDictionary)(PREFIX3(stream) *strm, uint8_t *dictionary, uint32_t *dictLength) { | |
| struct inflate_state *state; | |
| /* check state */ | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| /* copy dictionary */ | |
| if (state->whave && dictionary != NULL) { | |
| memcpy(dictionary, state->window + state->wnext, state->whave - state->wnext); | |
| memcpy(dictionary + state->whave - state->wnext, state->window, state->wnext); | |
| } | |
| if (dictLength != NULL) | |
| *dictLength = state->whave; | |
| return Z_OK; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateSetDictionary)(PREFIX3(stream) *strm, const uint8_t *dictionary, uint32_t dictLength) { | |
| struct inflate_state *state; | |
| unsigned long dictid; | |
| int32_t ret; | |
| /* check state */ | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if (state->wrap != 0 && state->mode != DICT) | |
| return Z_STREAM_ERROR; | |
| /* check for correct dictionary identifier */ | |
| if (state->mode == DICT) { | |
| dictid = functable.adler32(ADLER32_INITIAL_VALUE, dictionary, dictLength); | |
| if (dictid != state->check) | |
| return Z_DATA_ERROR; | |
| } | |
| /* copy dictionary to window using updatewindow(), which will amend the | |
| existing dictionary if appropriate */ | |
| ret = updatewindow(strm, dictionary + dictLength, dictLength, 0); | |
| if (ret) { | |
| state->mode = MEM; | |
| return Z_MEM_ERROR; | |
| } | |
| state->havedict = 1; | |
| Tracev((stderr, "inflate: dictionary set\n")); | |
| return Z_OK; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateGetHeader)(PREFIX3(stream) *strm, PREFIX(gz_headerp) head) { | |
| struct inflate_state *state; | |
| /* check state */ | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if ((state->wrap & 2) == 0) | |
| return Z_STREAM_ERROR; | |
| /* save header structure */ | |
| state->head = head; | |
| head->done = 0; | |
| return Z_OK; | |
| } | |
| /* | |
| Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found | |
| or when out of input. When called, *have is the number of pattern bytes | |
| found in order so far, in 0..3. On return *have is updated to the new | |
| state. If on return *have equals four, then the pattern was found and the | |
| return value is how many bytes were read including the last byte of the | |
| pattern. If *have is less than four, then the pattern has not been found | |
| yet and the return value is len. In the latter case, syncsearch() can be | |
| called again with more data and the *have state. *have is initialized to | |
| zero for the first call. | |
| */ | |
| static uint32_t syncsearch(uint32_t *have, const uint8_t *buf, uint32_t len) { | |
| uint32_t got, next; | |
| got = *have; | |
| next = 0; | |
| while (next < len && got < 4) { | |
| if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) | |
| got++; | |
| else if (buf[next]) | |
| got = 0; | |
| else | |
| got = 4 - got; | |
| next++; | |
| } | |
| *have = got; | |
| return next; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateSync)(PREFIX3(stream) *strm) { | |
| unsigned len; /* number of bytes to look at or looked at */ | |
| int flags; /* temporary to save header status */ | |
| size_t in, out; /* temporary to save total_in and total_out */ | |
| unsigned char buf[4]; /* to restore bit buffer to byte string */ | |
| struct inflate_state *state; | |
| /* check parameters */ | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if (strm->avail_in == 0 && state->bits < 8) | |
| return Z_BUF_ERROR; | |
| /* if first time, start search in bit buffer */ | |
| if (state->mode != SYNC) { | |
| state->mode = SYNC; | |
| state->hold <<= state->bits & 7; | |
| state->bits -= state->bits & 7; | |
| len = 0; | |
| while (state->bits >= 8) { | |
| buf[len++] = (unsigned char)(state->hold); | |
| state->hold >>= 8; | |
| state->bits -= 8; | |
| } | |
| state->have = 0; | |
| syncsearch(&(state->have), buf, len); | |
| } | |
| /* search available input */ | |
| len = syncsearch(&(state->have), strm->next_in, strm->avail_in); | |
| strm->avail_in -= len; | |
| strm->next_in += len; | |
| strm->total_in += len; | |
| /* return no joy or set up to restart inflate() on a new block */ | |
| if (state->have != 4) | |
| return Z_DATA_ERROR; | |
| if (state->flags == -1) | |
| state->wrap = 0; /* if no header yet, treat as raw */ | |
| else | |
| state->wrap &= ~4; /* no point in computing a check value now */ | |
| flags = state->flags; | |
| in = strm->total_in; | |
| out = strm->total_out; | |
| PREFIX(inflateReset)(strm); | |
| strm->total_in = (z_size_t)in; | |
| strm->total_out = (z_size_t)out; | |
| state->flags = flags; | |
| state->mode = TYPE; | |
| return Z_OK; | |
| } | |
| /* | |
| Returns true if inflate is currently at the end of a block generated by | |
| Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP | |
| implementation to provide an additional safety check. PPP uses | |
| Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored | |
| block. When decompressing, PPP checks that at the end of input packet, | |
| inflate is waiting for these length bytes. | |
| */ | |
| int32_t Z_EXPORT PREFIX(inflateSyncPoint)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| INFLATE_SYNC_POINT_HOOK(strm); | |
| state = (struct inflate_state *)strm->state; | |
| return state->mode == STORED && state->bits == 0; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateCopy)(PREFIX3(stream) *dest, PREFIX3(stream) *source) { | |
| struct inflate_state *state; | |
| struct inflate_state *copy; | |
| unsigned char *window; | |
| unsigned wsize; | |
| /* check input */ | |
| if (inflateStateCheck(source) || dest == NULL) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)source->state; | |
| /* allocate space */ | |
| copy = ZALLOC_INFLATE_STATE(source); | |
| if (copy == NULL) | |
| return Z_MEM_ERROR; | |
| window = NULL; | |
| if (state->window != NULL) { | |
| wsize = 1U << state->wbits; | |
| window = (unsigned char *)ZALLOC_WINDOW(source, wsize, sizeof(unsigned char)); | |
| if (window == NULL) { | |
| ZFREE_STATE(source, copy); | |
| return Z_MEM_ERROR; | |
| } | |
| } | |
| /* copy state */ | |
| memcpy((void *)dest, (void *)source, sizeof(PREFIX3(stream))); | |
| ZCOPY_INFLATE_STATE(copy, state); | |
| copy->strm = dest; | |
| if (state->lencode >= state->codes && state->lencode <= state->codes + ENOUGH - 1) { | |
| copy->lencode = copy->codes + (state->lencode - state->codes); | |
| copy->distcode = copy->codes + (state->distcode - state->codes); | |
| } | |
| copy->next = copy->codes + (state->next - state->codes); | |
| if (window != NULL) { | |
| wsize = 1U << state->wbits; | |
| memcpy(window, state->window, wsize); | |
| } | |
| copy->window = window; | |
| dest->state = (struct internal_state *)copy; | |
| return Z_OK; | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateUndermine)(PREFIX3(stream) *strm, int32_t subvert) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR | |
| state->sane = !subvert; | |
| return Z_OK; | |
| #else | |
| Z_UNUSED(subvert); | |
| state->sane = 1; | |
| return Z_DATA_ERROR; | |
| #endif | |
| } | |
| int32_t Z_EXPORT PREFIX(inflateValidate)(PREFIX3(stream) *strm, int32_t check) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return Z_STREAM_ERROR; | |
| state = (struct inflate_state *)strm->state; | |
| if (check && state->wrap) | |
| state->wrap |= 4; | |
| else | |
| state->wrap &= ~4; | |
| return Z_OK; | |
| } | |
| long Z_EXPORT PREFIX(inflateMark)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (inflateStateCheck(strm)) | |
| return -65536; | |
| INFLATE_MARK_HOOK(strm); /* hook for IBM Z DFLTCC */ | |
| state = (struct inflate_state *)strm->state; | |
| return (long)(((unsigned long)((long)state->back)) << 16) + | |
| (state->mode == COPY ? state->length : | |
| (state->mode == MATCH ? state->was - state->length : 0)); | |
| } | |
| unsigned long Z_EXPORT PREFIX(inflateCodesUsed)(PREFIX3(stream) *strm) { | |
| struct inflate_state *state; | |
| if (strm == NULL || strm->state == NULL) | |
| return (unsigned long)-1; | |
| state = (struct inflate_state *)strm->state; | |
| return (unsigned long)(state->next - state->codes); | |
| } |