| Each utility has its own version number, date of last change and |
| some description at the top of its ".c" file. All utilities in the main |
| directory have their own "man" pages. There is also a sg3_utils man page. |
| |
| Changelog for pre-release sg3_utils-1.48 [20221112] [svn: r983] |
| - some utilities: add experimental --json[=JO] option |
| - sg_z_act_query: new utility for sending either a |
| Zone activate or Zone query command |
| - sg_rep_density: new utility for decoding the response of |
| Report density support command [ssc (tape)] |
| - sg_rem_rest_elem: new utility for removing or restoring |
| elements |
| - sg_rtpg: https://github.com/hreinecke/sg3_utils/pull/79 |
| applied |
| - rescan-scsi-bus.sh: with '-r' it crashed due to change in |
| rev 867 in sg_inq.c from Device_type= to PDT= . |
| Change script to use either |
| - undo regression in rev 815 that added newline after |
| each LUN in the default (no option) output |
| - rev 815 changed the order of listing hosts from |
| numeric to alphabetical, change it back to numeric |
| - https://github.com/doug-gilbert/sg3_utils/pull/17 |
| applied with tweaks: add timeout parameter |
| - clean $norm handling |
| - fix handling of '-I <secs>' option |
| - sgdevice26: do not traverse sg class if scsi_device |
| is not added |
| - add -no-lip-scan option |
| - https://github.com/doug-gilbert/sg3_utils/pull/21 |
| - speed testonline() when peripheral_qualifier != 0 |
| see https://github.com/doug-gilbert/sg3_utils/issues/24 |
| - speed multipath scans with many LUNs, cache multipath |
| LUN info in temporary file, see |
| https://github.com/doug-gilbert/sg3_utils/issues/22 |
| - sg_rep_zones: add Report zone starting LBA granularity |
| field in REPORT ZONES response [zbc2r12] |
| - add --brief option, show part of header and last |
| descriptor fetched |
| - add --find ZT option to find the first occurrence of |
| ZT; if ZT prefixed by - or ! find first not equal to ZT |
| - add --statistics option |
| - sg_get_elem_status: change '--maxlen=' option default to |
| 1056 (header plus 32 physical element status descriptors) |
| - sg_decode_sense: add --nodecode option |
| - sg_logs: tweak the meaning of --list option to more closely |
| reflect the contents of log pages 0x0 and 0x0,0xff |
| - make '-lll' set union of log pages 0x0 and 0x0,0xff |
| - add --exclude option to exclude vendor specific pages |
| and parameters |
| - add --undefined option for hex format of undefined/ |
| unrecognized fields |
| - for short binary fields, remove address (index) from |
| the left hand side of each line of hex |
| - improve 'last_n' log pages; supply VPD and mode pages |
| with their name (if T10 defined) |
| - update names for TapeAlert lpage |
| - allow --page selection with --inhex=FN |
| - sg_modes: improve handling of zbc disks with pdt=0x14 |
| - sg_inq, sg_vpd: merge VPD page processing for T10 |
| defined pages, VS pages still differ |
| - Device Identication VPD page, change |
| "IEEE Company_id" to "AOI" as per spc6r06.pdf |
| - add support for Hitachi/HP open-v ldev names |
| - sg_vpd: apply github pull 18 (missing LF) |
| - add --sinq_inraw=RFN option |
| - sg_opcodes: cleanup error reporting |
| - add --inhex=FN to process earlier -HHH |
| - sg_format: allow disk formats on ZBC (zoned) disks |
| - sg_read_buffer: add --eh_code= and --no_output options |
| - sg_ses: add exp_sas_addr acronym for getting expander's |
| SAS address |
| - sg_turs: change nanosleep() to Sleep() in MinGW |
| - see sg_lib below for two new exit status values |
| - sg_stream_ctl: fix --get indexing |
| - sg_read_block_limits: fix granularity value |
| - add --mloi option |
| - inhex/logs_last_n.hex: new, tests for the 4 "Last n ..." |
| log (sub)pages |
| - sg_lib: add sg_pdt_s_eq() to cope with ZBC disks which may |
| be either PDT_ZBC (if host managed) or PDT_DISK |
| - add hex2fp(), similar to hex2str() but outputs to FILE |
| - cleanup masks for PDT [0x1f] and group_number [0x3f] |
| - new sg_json_builder.[hc] files local to lib folder |
| - document internal json interface in include/sg_pr2serr.h |
| - add SG_C_CPP_ZERO_INIT to better handle aggregate stack |
| instance zeroing (C23 adding 'struct T t {};' will help) |
| - correct fixed format sense data command-specific field |
| for ata-passthrough (lba field), see: |
| https://github.com/doug-gilbert/sg3_utils/pull/25 |
| - add sg_ll_read_block_limits_v2() for MLOI bit |
| - https://github.com/doug-gilbert/sg3_utils/pull/32 added |
| with tweaks; adds SG_LIB_CAT_STANDBY and |
| SG_LIB_CAT_UNAVAILABLE which refine the 'not ready' |
| exit status. Useful for sg_turs |
| - initialize all sense buffers to 0 |
| - linux: replace references to /proc/scsi/sg with |
| /sys/module/sg/parameters/ |
| - rework main README file |
| - rev 921+922 are bugfix revs on release 1.47 [r919,920] |
| - configure.ac: map msys to mingw |
| - repeat tweak to accept uclinux as linux |
| - sg_dd: change uint type to uint32_t |
| - remove unused out2_off in main() |
| - sg_pt_dummy.c: remove problematic include |
| - sg3_utils.spec: change tarball extension from .tgz to |
| .tar.gz ; fix build issue with Fedora 36 |
| - build cleanups for 'make distcheck', see |
| https://github.com/doug-gilbert/sg3_utils/pull/26, 27 and |
| 28; need svn:ignore property or maybe global-ignores |
| - round of coverity identified issue fixes (and non-issues) |
| - autoconf: upgrade version 2.70 to 2.71; automake upgrade |
| to version 1.16.5 (from Fedora 36) |
| - remove archive directory (and its contents) |
| - codespell fixes |
| |
| Changelog for released sg3_utils-1.47 [20211110] [svn: r919] |
| - sg_rep_zones: add support for REPORT ZONE DOMAINS and |
| REPORT REALMS in this utility |
| - sg_raw: fix prints of NVMe NVM command names |
| - sg_ses: fix Windows problem "No command (cdb) given" |
| - fix crash when '-m LEN' < 252 |
| - guard against smaller '--maxlen=' values |
| - sg_logs: additions to Volume statistics lpage [ssc5r05c] |
| - additions to Command duration limits statistics log |
| page [spc6r06] |
| - sg_vpd: fix do_hex type on some recent pages |
| - zoned block dev char vpd: add zone alignment mode and |
| zone starting LBA granularity [zbc2r11] |
| - sg_read_buffer: fix --length= problem |
| - sg_dd, sgm_dd, sgp_dd: don't close negative file descriptors |
| - sg_dd: srand48_r() and mrand48_r() are GNU libc specific, |
| put conditional in so non-reentrant version used otherwise |
| - 'iflag=00,ff' places the 32 bit block address (big endian) |
| into each block |
| - sgp_dd: major rework, fix issue with error being ignored |
| - new: --chkaddr which checks for block address in each block |
| - add check for stdatomic.h presence in configure.ac |
| - sg_xcopy: tweak CSCD identification descriptor |
| - sg_get_elem_status: fix issue with '--maxlen=' option |
| - add 2 depopulation revocation health attributes [sbc5r01] |
| - transport error handling improved. To fix report of a |
| BAD_TARGET transport error but the utility still continued. |
| - introduce SG_LIB_TRANSPORT_ERROR [35] exit status |
| - several utilities: override '--maxlen=LEN' when LEN |
| is < 16 (or 4), take default (or 4) instead |
| - scripts: 55-scsi-sg3_id.rules remove outdated rule |
| - sg_lib: add sg_scsi_status_is_good(), |
| sg_scsi_status_is_bad() and sg_get_zone_type_str() |
| - pt_linux: fix verify(BytChk=0) which Linux SNTL translated |
| to write, other SNTL cleanups |
| - pt_linux_nvme: fix fua setting |
| - pt: check_pt_file_handle() add return value of 5 for |
| FreeBSD for nvme(cam) |
| - pt: new configure option --enable-pt_dummy builds the |
| library with sg_pt_dummy.c instead of OS specific code; |
| for experimenting with --inhex= decoding on netbsd |
| - pt: add Haiku OS support |
| - gcc -fanalyzer fixes: in sg_pt_linux.c + sg_write_x.c |
| - sg_pt_dummy.c: add list of functions that a new pt |
| needs to define |
| - configure.ac: tweak to accept uclinux as linux |
| - move some hex files from examples to inhex directory |
| - major rework of lib/sg_pt_freebsd.c; make SNTL as similar |
| as practical to the Linux implementation |
| - add testing/sg_take_snap |
| - change links to http://sg.danny/cz/sg/* to https |
| |
| Changelog for released sg3_utils-1.46 [20210329] [svn: r891] |
| - sg_rep_pip: new utility: report provisioning initialization |
| pattern command |
| - sg_turs: estimated time-to-ready [spc6r03] |
| - add --delay=MS option |
| - sg_requests: substantial cleanup |
| - sg_vpd: add Format presets and Concurrent positioning ranges |
| - add hot-pluggable field in standard Inquiry [spc6r05] |
| - fix vendor struct opts_t alignment |
| - sg_inq: add hot-pluggable field in standard Inquiry |
| - sg_dd: --verify : separate category for miscompare errors |
| - --verify : oflag=coe continue on miscompares, counts them |
| - add cdl= operand for command duration limit indexes |
| - add oflag=nocreat and conv=nocreat : OFILE must exist |
| - add iflag=00, ff, random flags |
| - setup conditional auto rule for getrandom() |
| - add command timeout after comma in time= operand |
| - sg_get_elem_status: add ralwd bit sbc4r20a |
| - sg_write_x: add dld bits to write(32) [sbc4r19a] |
| - sg_rep_zones: print invalid write pointer LBA as -1 rather |
| than 16 "f"s |
| - sg_opcodes: improve handling of RWCDLP field |
| - sg_ses: use fan speed factor field for calculation [ses4r04] |
| - add --all (-a) option, same action as --join |
| - sg_compare_and_write: add examples section to its manpage |
| - sg_modes: document '-s' option (same as '-6') |
| - sg_sanitize + sg_format: when --verbose given once report |
| probable success; without --verbose 'no news is good news' |
| - sg_zone: add Remove element and modify zones command |
| - sg_raw: increase maximum data-in and data-out buffer size |
| from 64 KB to 1 MB |
| - fix --cmdfile= handling |
| - add --nvm option to send commands from the NVM command set |
| - add --cmdset option to bypass cdb heuristic |
| - add --scan= first_opcode,last_opcode |
| - sg_pt_freebsd: allow device names without leading /dev/ |
| thus fix for regression introduced in rev 731 (ver: 1.43) |
| - sg_pt_solaris+sg_pt_osf1: fix problem with clear_scsi_pt_obj() |
| which needs to remember is_nvme and dev_fd values |
| - sg_lib: add ZBC (2020) feature set entries |
| - sg_lib: restore elements and rebuild command added |
| - sg_lib,sg_pt: add partial_clear_scsi_pt_obj(), |
| get_scsi_pt_cdb_len() and get_scsi_pt_cdb_buf() |
| - add do_nvm_pt() for the NVM (sub-)command set |
| - tweak transport error handling in Linux |
| - sg_lib: Linux NVMe SNTL: add read, write and verify; |
| synchronize cache and write same translations |
| - add dummy start stop unit and test unit ready commands |
| - wire cache mpage's WCE to nvme 'volatile write cache' |
| - fix crash in sg_f2hex_arr() when fname not found |
| - sg_lib: reprint cdb with illegal request sense key |
| - asc/ascq match asc-num.txt @t10 20200708 [spc6r02] |
| - gcc-10: suppress warnings |
| - autoconf: upgrade version 2.69 to 2.70 |
| - remove space from end of source lines for git-svn |
| - testing/sg_mrq_testing: new, for blocking mrq usage |
| - testing/sgs_dd: add evfd flags and eventfd processing |
| - testing: remove master-slave terminology for sgv4 |
| - examples: add nvme_read_ctl.hex and nvme_write_ctl.hex |
| |
| Changelog for released sg3_utils-1.45 [20200229] [svn: r843] |
| - sg_get_elem_status: new utility [sbc4r16] |
| - sg_ses: bug: --page= being overridden when --control and --data= also |
| given; fix |
| - document explicit Element type codes and example |
| - rename 'SAS SlimLine' to SlimSAS [ses4r02] |
| - add --inhex=FN, equivalent to --data=@FN, for compatibility with |
| other utilities |
| - 'fan speed factor' field added in 20-013r1 |
| - sg_opcodes: expand MLU (now 2 bits, spc5r20) |
| - include RWCDLP field as extension of CDLP field (spc5r01) |
| - sg_write_buffer: allow comma and period separated lists when input |
| from stdin |
| - sg_inq: update version descriptors to spc5r21 |
| - add some NVMe 1.4 snippets to ctl identify |
| - sg_format: add --dcrt used twice (FOV=1 DCRT=0) |
| - add support for FORMAT WITH PRESET (sbc4r18) |
| - sg_raw: fix --send bug when using stdin |
| - sg_vpd: 3pc VPD page add copy group descriptor |
| - add --examine option |
| - new zoned block device char. page (zbc2r04) |
| - sg_read_buffer: decode read microcode status page |
| - add --inhex=FN option |
| - sg_request: add --error option, replaces opcode with 0xff (or skips call |
| to pass-through) |
| - sg_get_lba_status: add --inhex=FN option |
| - sg_xcopy: add --fco (fast copy only) (spc5r20) |
| - implement --app=1 (append) on regular OFILE type |
| - sg_scan (win32): expand limits for big arrays |
| - sg_modes: placeholders for Command duration limit T2A and T2B mpages |
| (sbc4r17) |
| - improve zbc support (e.g. caching mpage) |
| - sg_logs: add Command duration limits statistics lpage (spc6r01) |
| - zoned block device statistics log page: shorten counter fields from |
| 8 to 4 bytes (zbc2r02) |
| - new field in this log page (zbc2r04) |
| - change '-ll' option to suppress subpages=0xff apart from page |
| 0x0,0xff. Used three times: list all pages and subpages names |
| reported |
| - sg_reassign: for defect list format 6 (vendor specific) don't try to decode |
| - sg_rep_zones: expand some fields per zbc2r04 |
| - add --num= and --wp options |
| - sg_verify: correct so issues VERIFY(16) |
| - add --0 and --ff options and implement bytchk=3 properly |
| - sg_write_same: add --ff for 0xff fill |
| - sg_luns: report new "target commands" w-lun (19-117) |
| - sg_dd: add --verify support |
| - sgp_dd: support memory-mapped IO via mmap flag |
| - inhex directory: new, contains ASCII hex files that can be used with |
| the '--inhex=' option |
| - sg_lib: add sg_t10_uuid_desig2str() |
| - add sg_get_command_str and sg_print_command_len() |
| - speed up sg_print_command() |
| - sg_scsi_normalize_sense(): populate byte4,5,6 |
| - tweak sg_pt interface to better handle bidi |
| - sg_cmds_process_resp(): two arguments removed |
| - add ${PACKAGE_VERSION} to '.so' name |
| - add sg_f2hex_arr() |
| - update some tables for NVMe 1.4 |
| - sg_get_num()+sg_get_llnum(): add 'e' decoding, exabytes; allow |
| addition (e.g. --count=3+1k) |
| - asc/ascq match asc-num.txt @t10 20191014 |
| - new zbc2r04 service actions |
| - sg_pt_freebsd: fixes for FreeBSD 12.0 release |
| - scripts: update 54-before-scsi-sg3_id.rules, scsi-enable-target-scan.sh |
| and 59-fc-wwpn-id.rules |
| - linux: add nanosecond durations when SG3_UTILS_LINUX_NANO environment |
| variable givenand Linux sg driver >= 4.0.30 |
| - rescan-scsi-bus: widen LUN 0 only scanning |
| - multiple patches to sync with Suse |
| - testing/sg_tst_async: fix free_list issue |
| - testing/sg_tst_ioctl: for sg 4.0 driver |
| - testing/sg_tst_bidi: for sg 4.0 driver |
| - testing/sgh_dd: test request sharing, mreqs... |
| - add --verify support |
| - testing/sgs_dd: back from archive, for testing SIGPOLL (SIGIO) and |
| realtime (RT) signals |
| - testing/sg_chk_asc: allow LF and CR/LF in asc-num.txt |
| - testing: 'make' now builds both C and C++ programs |
| - sg_pt: add sg_get_opcode_translation() to replace global pointer to |
| array: sg_opcode_info_arr[] |
| - extend small SNTL to support read capacity |
| - utils/hxascdmp: add -o=<offset> option |
| - add -1, -2 and -q options |
| - sg_io_linux (sg_lib): add sg_linux_sense_print() |
| - sg_pt_linux: uses sg v4 interface if sg driver >= 4.0.0 . Force sg v3 |
| always by building with './configure --disable-linux-sgv4' |
| - add sg_linux_get_sg_version() function |
| - add: 'SPDX-License-Identifier: BSD-2-Clause' or a small number of |
| 'GPL-2.0-or-later' |
| - gcc-9: suppress (pointless) warnings |
| - automake: upgrade to version 1.16.1 |
| - autoconf: upgrade to version 2.69 |
| - sync with fixes from Redhat, via github |
| |
| Changelog for sg3_utils-1.44 [20180912] [svn: r791] |
| - same code as release 1.43 20180911 svn rev 789; |
| new release due to sync problem with git mirror at: |
| https://github.com/hreinecke/sg3_utils |
| that has a v1.43 tag dated 20160217 [svn: r663] |
| |
| Changelog for sg3_utils-1.43 [20180911] [svn: r789] |
| - release 1.43 20180911 svn rev 789 |
| - sg_write_x: where x can be normal, atomic, or(write), |
| same, scattered, or stream writes with 16 or 32 byte |
| cdbs (sbc4r04 for atomic, sbc4r11 for scattered) |
| - sg_bg_ctl: new Background control command (sbc4r08) |
| - sg_seek: new SEEK(10) or PRE-FETCH(10 or 16) |
| - sg_stream_ctl: new, STREAM CONTROL or GET STREAM STATUS |
| - sg_senddiag: add --timeout=SECS option |
| - sg_sanitize: add --timeout=SECS option |
| - add --dry-run option |
| - sg_format: add --timeout=SECS option |
| - add --dry-run option to bypass modifying behaviour |
| - add --quick option to skip reconsideration time |
| - extend --wait timeout to 40 hours for disk sizes |
| > 4 TB and 80 hours if > 8 TB |
| - when changing block size allow for Mode Select |
| rejecting SP=1 (Save Page): repeat with SP=0 |
| - FFMT tweaks: default CMPLST to false, shorten poll |
| - make all data-in and data-out buffers page aligned |
| - sg_decode sense: add --cdb and --err=ES options |
| - sg_ses: handle 2 bit EIIOE field in aes dpage |
| - increase join array size from 260 to 520 elements |
| - add --quiet option to suppress messages |
| - expand join handling of SAS connectors and others |
| - expand join debug code |
| - allow multiple --clear=, --get= and --set= options |
| - allow individual index ranges (e.g. --index=3-5) |
| - allow --index=IIA with -ee to enumerate only fields |
| belonging to element type IIA |
| - --data=@FN with --status now decodes dpage(s) in FN |
| - add 'offset_temp' and 'rqst_override' to temperature |
| sensor element type |
| - add 'hw_reset' and 'sw_reset' to enclosure services |
| controller electronics element type (18-047r1) |
| - interpret '--join --page=aes' to only display join |
| rows that have a corresponding AES dpage element |
| - support NVMe attached enclosure via NVME-MI Send and |
| Receive SES commands |
| - decode array status diagnostic page (obsolete) |
| - sync to ses4r01 |
| - sg_ses_microcode: add --dry-run and -ealsd options |
| - sg_ses, sg_ses_microcode, sg_senddiag: make all access |
| buffer page size aligned (typically page_size=4096) |
| - sg_write_buffer: add --dry-run option |
| - sg_luns: resync with drafts (sam6r02+spc5r10) |
| - remove undocumented test "W" format |
| - accept and output on request "quad dashed" format |
| - sg_logs: fix volume statistics lpage when subpage |
| is zero (ssc5r02a); decode mount history log parameter |
| - add --vendor=VP and '--pdt=DT' options |
| - decode Requested recovery, TapeAlert response, and |
| Service buffer information lpages for tape |
| - add min+max 'mounted' temperature and rel. humidity |
| fields to Environmental reporting lpage (spc5r10) |
| - add last n Inquiry/Mode_page data changed log |
| pages (spc5r17) |
| - add zoned block device statistics lpage (zbc2r?, |
| 16-264r4) |
| - fixup enumeration in power condition transition |
| log page (from H. Reinecke, Suse) |
| - sg_inq: fix potential unbounded loop in --export |
| - add --only to stop standard inquiry decoding also |
| doing a serial number vpd page (0x80) fetch |
| - update version descriptor list to 20170114 |
| - add further checks so CDROM standard inquiry response |
| doesn't trick --inhex into thinking it's VPD pg 0x80 |
| - decode NVMe Identify controller/nsid commands |
| - with NVMe --only restricts to a single Identify |
| controller command |
| - add --long which decodes more of the NVMe Identify |
| command responses |
| - sg_inq+sg_vpd: update Extended inquiry data vpd |
| page (spc5r09 and 17-142r5) |
| - block limits and block limit extension VPD pages: |
| add extra info about corner cases |
| - add maximum inquiry|mode_page change logs fields |
| to extended inquiry vpd page (spc5r17) |
| - both now return EDOM (adjusted sg error code) when |
| requested page not in Supported VPD Pages page |
| - add --force option to bypass checking Supported |
| Vpd Pages page and fetch requested page directly |
| - sg_vpd: 3 party copy VPD page improvements |
| - fully implement Device constituents VPD page |
| - decode some WDC/Hitachi vendor VPD pages |
| - improve handling of unknown pages |
| - sg_reassign+sg_write_same: fix ULONG_MAX problem |
| - sg_rdac: add sanity checks for -f=lun value |
| - sg_turs+sg_requests: make both accept '--num=NUM' |
| and '--number=NUM' for mutual compatibility |
| - sg_turs: add --low option |
| - fix exit status when not ready in single case |
| - sg_zone: fix debug cdb naming |
| - add --sequentialize, --count=ZC options, zbc2r01b |
| - sg_reset_wp add --count=ZC option, zbc2r01b |
| - sg_persist: add --maxlen-LEN option, LEN defaults to |
| decimal, similar to --alloc-length= which takes hex |
| - add Replace lost reservation capable (RLR_C) bit |
| in Report Capabilities (spc4r36) |
| - sg_dd: add --dry-run and --verbose options |
| - allow multiple short options (e.g. -dvv ) |
| - sgp_dd: pthread_cancel() has issues in C++ (and |
| the Android multi-threaded library doesn't supply it) |
| so use pthread_kill() in its place [Linux only] |
| - add --dry-run and --verbose options |
| - sgm_dd: add --dry-run and --verbose options |
| - sg_opcode: add '--enumerate' and '--pdt=' options |
| - support CDLP (command duration limit page) |
| - support MLU, Multiple Logical Units (18-045r1) |
| - check resid and trim response if necessary |
| - report when --no-inquiry is ignored |
| - sg_raw: add --enumerate option |
| - add --cmdfile=CF option, permit 64 byte NVMe |
| admin commands to be sent |
| - add --raw option (for CF in binary) |
| - page align input and output buffers |
| - sg_get_lba_status: add --report-type= option (sbc4r12) |
| - add support for 32 byte cdb variant (sbc4r14) |
| - add support for --element-id= and --scan-len= |
| options (sbc4r14) |
| - decode response's RTP and two more provisioning |
| statuses and the additional status (sbc4r12) |
| - decode completion condition (sbc4r14) |
| - sg_modes: add Out of band management control mpage |
| - accept acronym for page/subpage codes |
| - sg_rep_zones: expand --help option information |
| - sg_unmap: add --all=ST,RN[,LA] option to unmap |
| large contiguous segments of a disk/ssd |
| - add --dry-run and --force options |
| - sg_wr_mode: add --rtd option for RTD bit |
| - sg_timestamp: add '--no-timestamp' option |
| - add --elapsed and --hex options |
| - sginfo: don't open /dev/snapshot |
| - introduce SG3_UTILS_DSENSE environment variable |
| - manpages and usage messages: corrections from |
| Gris Ge via github |
| - group_number: is 6 bit field allowing 0 to 63, |
| code in several utilities limited it to 31, fix |
| - convert many two valued 'int's to bool |
| - sg_lib: add SSC maintenance in/out sa names |
| - enhance exit status values and associated |
| strings, add SG_LIB_OS_BASE_ERR (50) |
| - add sg_ll_inquiry_v2(), sg_ll_inquiry_pt() and |
| sg_simple_inquiry_pt() |
| - add sg_ll_report_luns_pt() |
| - add sg_ll_log_sense_v2() |
| - add sg_ll_mode_sense10_v2() |
| - add sg_ll_mode_select6_v2() and |
| sg_ll_mode_select10_v2() for RTD bit |
| - add sg_ll_receive_diag_v2() |
| - add sg_ll_write_buffer_v2() |
| - add sg_get_llnum_nomult() |
| - add sg_ll_get_lba_status16() |
| - add sg_ll_get_lba_status32() |
| - add sg_ll_format_unit_v2() |
| - add sg_ll_test_unit_ready_progress_pt() |
| - add sg_ll_start_stop_unit_pt() |
| - add sg_ll_request_sense_pt() |
| - add sg_ll_send_diag_pt(), sg_ll_receive_diag_pt() |
| - add sg_get_sfs_name() for spc5r11 (Feature sets) |
| - add sg_decode_transportid_str() |
| - add sg_msense_calc_length() |
| - add sg_all_zeros(), sg_all_ffs() |
| - add sg_get_sense_cmd_spec_fld() |
| - add sg_is_scsi_cdb() |
| - add sg_get_nvme_cmd_status_str() |
| - add sg_nvme_status2scsi() |
| - add sg_nvme_desc2sense() |
| - add sg_build_sense_buffer() |
| - add sg_get_nvme_opcode_name() |
| - add sg_memalign() and sg_get_page_size() |
| - add sg_is_aligned() and pr2ws() |
| - add sg_get_big_endian(), sg_set_big_endian() |
| - add hex2stdout(), hex2stderr() and hex2str() |
| - add sg_convert_errno() |
| - add sg_if_can2stdout(), sg_if_can2stderr() and |
| sg_exit2str() |
| - implement 'format' argument in dStrHexStr() |
| - add read buffer(16) command mode names |
| - add Microcode activation sense descriptor spc5r10 |
| - add SG_LIB_OK_TRUE(0) and SG_LIB_OK_FALSE(36) |
| non "error" code defines for exit status |
| - add SG_LIB_LBA_OUT_OF_RANGE error code |
| - add SG_LIB_UNBOUNDED_32BIT (_16BIT and _64BIT) |
| defines to help with decoding corner cases |
| - identify vendor specific sense data (response |
| code 0x7f), print contents in hex |
| - sg_pr2serr.h: add sg_scnpr() [like lk scnprintf()] |
| - sg_pt: add construct_scsi_pt_obj_with_fd() |
| - add pt_device_is_nvme(), get_pt_nvme_nsid() |
| - add check_pt_file_handle() |
| - add get_pt_file_handle(), set_pt_file_handle() |
| - add small SNTL to support sg_ses on NVMe |
| - sg_lib_data: sync asc/ascq codes with T10 20170114 |
| - add write scattered (16+32) cdb names sbc4r11 |
| - sg_cmds_extra: expand sg_ll_ata_pt() to send new |
| Ata pass-through(32) command (sat4r05) |
| - sg_sat_identify: expand to take --len=32 |
| - sg_pt: add dummy pt_device_is_nvme() |
| - rescan-scsi-bus.sh: harden code |
| - fixes from Suse; bump version |
| - bump version to 20180615 |
| - add to install list in Makefile, hope it does |
| not clash with other package providing it |
| - add --ignore-rev to ignore revision change |
| - 55-scsi-sg3_id.rules: fixes from Suse |
| - https://github.com/hreinecke/sg3_utils branch |
| sles15 synced 20170914 |
| - move some testing utilities out of the |
| 'examples' and 'utils' directories into the new |
| 'testing' directory |
| - add testing/sg_tst_nvme utility |
| - clean Makefile.freebsd in examples/ and testing/ |
| - gcc 7.2 cleanups (sysmacros.h etc) |
| - clang --analyze static checker clean ups |
| - shellcheck cleanup on scripts |
| - ./configure automake utility: |
| - option --enable-debug added for testing |
| - option --disable-linuxbsg retired, still accepted |
| but now ignored, Linux sg v3 or v4 interface |
| decision made at runtime |
| - Info section now printed at end of ./configure |
| - automake: add AM_PROG_AR to configure.ac |
| - upgrade to version 1.15 |
| - various configure.ac and Makefile.am cleanups |
| - add SG_LIB_ANDROID build 'define'. If defined then |
| SG_LIB_LINUX is also defined, so test for Android |
| before Linux if need to differentiate |
| - update BSD license from 3 to 2 clause aka FreeBSD |
| license (without reference to FreeBSD project) |
| - debian: bump compat file contents from 7 to 10 |
| |
| Changelog for sg3_utils-1.42 [20160217] [svn: r663] |
| - sg_timestamp: new, to report or set timestamp |
| - sg_read_attr: new, supported by tape drives |
| - sg_stpg: fix truncation of target port field |
| - sg_inq: cope with unicode strings, udev fixes |
| - update version descriptor list to 20160125 |
| - '--export': new entries for UUID descriptor |
| - sg_ses: add more field acronyms (ses3r11) |
| - sg_logs: add Utilization lpage (sbc4r07) |
| - add Background operation lpage |
| - add Pending defects lpage |
| - add LPS misalignment lpage (sbc4r10) |
| - document '--All' ('-A') option |
| - rework lto tape vendor lpages |
| - sg_vpd: add Block limits extension VPD page |
| - add Device constituents VPD page |
| - add LB Protection VPD page (ssc ssc5r02a) |
| - LB provisioning VPD page: expand LBPRZ, add |
| Minimum and Threshold percentage fields |
| - rework lto tape vendor VPD pages |
| - sg_inq+sg_vpd+sg_xcopy: add support for locally |
| assigned UUIDs in VPD page 0x83 (spc5r08) |
| - sg_sanitize: add --znr option (sbc4r07) |
| - sg_rep_zones: add --partial option (zbc-r04) |
| - sg_format: add ffmt option (sbc4r10) |
| - add support for FORMAT MEDIUM (for tape) |
| - sg_raw: document length relationships |
| - rescan-scsi-bus.sh: updates from Suse |
| - sg_lib_data: sync asc/ascq codes with T10 20151126 |
| - sg_lib: add 'sense' categories for SCSI statuses: |
| condition met, busy, task set full, ACA active and |
| task aborted |
| - add pr2serr() extern |
| - change sg_get_sense_str() and dStrHexStr(), return |
| chars written (returned void previously) |
| - add sg_get_sense_descriptors_str() function |
| - add sg_get_designation_descriptor_str() function |
| - sg_get_desig_type_str()+sg_get_desig_assoc_str() |
| and sg_get_desig_code_set_str() added |
| - sg_get_opcode_sa_name() break out zoning in/out, |
| read attribute and read position service actions |
| - sg_cmds_extra: add sg_ll_format_unit2() for FFMT |
| - sg_pr2serr.h: new, to shorten fprintf(stderr, ...) |
| - sg_io_linux, sg_pt_linux: drop SUGGEST_* decoding |
| - sg_unaligned.h: add 48 bit support and gets for |
| variable length unsigned integers |
| - add specializations for little and big endian |
| - change sg_ll_*() function's 'int noisy' to bool |
| |
| Changelog for sg3_utils-1.41 [20150511] [svn: r644] |
| - sg_zone: new utility for open, close and finish |
| zone commands introduced in zbc-r02 |
| - sg_rep_zones and sg_reset_wp: change opcodes as |
| indicated in zbc-r02 |
| - sg_read_buffer: add READ BUFFER(16) support (spc5r02) |
| - sg_logs: add --enumerate and acronyms |
| - allow decode from hex or binary in file |
| - decode environmental reporting + limits lpages |
| - sg_write_buffer: add --timeout=TO option |
| - sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE |
| plus support for zoning service actions |
| - sg_lib: in Linux blocked devices yield ENXIO from |
| ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY |
| - clean up sg_warnings_stream handling |
| - sg_inq+sg_vpd: fix SCSI name string decoding in |
| device identification VPD page (0x83) |
| - increase sanity on Unit Serial number VPD page |
| - improve rdac vpd page reporting (vendor) |
| - sg_inq: improve NAA handling in dev_id VPD page |
| - update version descriptor list to 20150126 |
| - sg_vpd: add atomic boundary values (sbc4r04) |
| - block limits VPD page: fix unmap granularity |
| alignment value; spc5r02 additions |
| - sg_readcap: add support for ZBC's rc_basis field |
| - sg_senddiag: fix bug with --raw option |
| - add support for -HHH for output suitable for --raw |
| - sg_ses: enclosure element: add failure and warning |
| acronyms, fix warning indication output |
| - additional element status dpage: add PCIe/NVMe |
| - handle element descriptor names that count |
| multiple trailing NULLs |
| - rescan-scsi-bus.sh: add --issue-lip-wait option and |
| improve error handling |
| - improve dm-multipath handling |
| - sg_modes: make '-HHH' output suitable as input to |
| 'sdparm --inhex=' |
| - sg_rdac: add '-6' option for mode sense/select(6) |
| - add support for reporting more SCSI transports |
| and accessing rdac extended mode page 0x2c |
| - sg_write_same: cleanup, mainly man page |
| - scsi_logging_level: replace use of tr command |
| - examples/sg_tst_async: cleanup |
| - examples/sg-simple_aio.c: remove |
| - sg_lib_data: sync asc/ascq codes with T10 20150423 |
| - Makefile cleanup |
| - autogen.sh: upgrade to buildconf 20091223 version |
| |
| Changelog for sg3_utils-1.40 [20141110] [svn: r620] |
| - sg_write_verify: new utility for WRITE AND VERIFY |
| - sg_ses_microcode: new utility |
| - sg_sat_read_gplog: new utility |
| - sg_senddiag: add --maxlen= option |
| - sg_copy_results: correct response length calculations |
| - sg_format: make '-FFF' bypass mode sense/select |
| - add --mode=MP to supply alternate mode page, |
| default remains read-write error recovery mpage |
| - output unit serial number and LU name prior to |
| - sg_inq: expand Block limits VPD page output |
| - fix --cmddt output if not supported by device |
| - more sanity checks on vendor supplied fields |
| - sg_vpd: add --all option |
| - more TPC VPD page decoding |
| - add zoned block device characteristics page |
| - more sanity checks on vendor supplied fields |
| - sg_ses: fix problem with --index=sse (and ssc) |
| - mask status element before using as control |
| - defeat previous item with --mask (ignore) option |
| - SAS connector status element: add overcurrent bit |
| - handle element descriptor names that count a |
| trailing NULL |
| - add --warn option mainly for broken joins |
| - add optional descriptions to -ee output |
| - sync with ses3r07 |
| - sg_sanitize: add --desc and --zero options |
| - output unit serial number and LU name prior to |
| - sg_rep_zones: corrections, sync with zbc-r01c |
| - sg_persist: split help into two pages, '-hh' for 2nd |
| - sg_logs: refine tape drive output |
| - sg_raw: with -vvv decode T10 CDB name |
| - do not output/print data-in if error |
| - sg_opcodes: add --compact field |
| - sg_senddiag: add --page=PG option |
| - sg_reset: add words for EAGAIN from reset ioctl |
| - sg_sat_*: mention t_type and multiple_count fields |
| - win32: sg_scan: handle larger configurations |
| - sg_lib: trim trailing spaces in dStrHex() and friends |
| - sg_lib_data: sync asc/ascq codes with T10 20140924 |
| - clean up service action string functions |
| - sg_ll_unmap_v2(): fix group number |
| - sg_ll_inquiry(), sg_ll_mode_sense*(), |
| sg_ll_log_sense(): use resid to clear unfilled |
| data-in buffer |
| - sg_unaligned.h: add header for building parameters |
| - examples/sg_tst_async: new Linux sg test utility |
| |
| Changelog for sg3_utils-1.39 [20140612] [svn: r588] |
| - sg_rep_zones: new utility for ZBC REPORT ZONES |
| - sg_reset_wp: new utility, ZBC RESET WRITE POINTER |
| - sg_ses: add --eiioe=auto|force option |
| - fix AES dpage element indexing problems |
| - add --readonly option |
| - sg_write_buffer: add --bpw=CS option to call |
| write buffer multiple times for big blobs |
| - sg_format: add --ip_def option to fully provision |
| - sg_opcodes: add --mask option |
| - sg_logs: add --in=FN option for log select params |
| - add --filter=PARC (parameter code) |
| - add --no_inq for suppress initial INQUIRY call |
| - add --readonly option |
| - sg_persist: add --readonly option, environment |
| variable SG_PERSIST_IN_RDONLY sets ro on prin cmds |
| - sg_inq: sync version descriptors dated 20105176 |
| - suppress dev-id VPD messages so they only appear |
| when --verbose is given |
| - add new SCSI_IDENT_*_ATA pair to --export output |
| - sg_luns: add decoding for conglomerate LUNS |
| - add --lu_cong option to simulate the LU_CONG bit |
| - sg_vpd: add --vendor=VP option, re-order vendor |
| specific pages, split lto into lto5 and lto6 |
| - add Supported block lengths and protection types |
| page (sbc4r01) |
| - add Block device characteristics extension |
| page (sbc4r02) |
| - sg_copy_results, sg_get_lba_status, sg_luns, |
| sg_read_buffer, sg_readcap, sg_referrals, sg_rtpg, |
| sg_sat_set_features, sg_sat_identify: |
| add --readonly option |
| - sginfo: strip trailing spaces from INQUIRY text |
| - sg_rbuf: add --echo option (to use echo buffer) |
| - sg_lib: add sanitize command service action names |
| - add 'sense' categories for reservation conflict, |
| data protect and protection information violations |
| - add sg_get_category_sense_str() to API |
| - change struct sg_simple_inquiry_resp::rmb to byte_1 |
| - add initial zbc service actions |
| - dStrHex(Err): fix output truncation error |
| - linux, sg: support SCSI_PT_FLAGS_QUEUE_AT_TAIL and |
| SCSI_PT_FLAGS_QUEUE_AT_HEAD (block layer queueing) |
| - sg_lib_data: sync asc/ascq codes with T10 20140516 |
| - sync operation code with T10 20140515 |
| - add id string for SPC-5 |
| - scripts/59-scsi-sg3_utils.rules: removed |
| - functionality split into two scripts: |
| 55-scsi-sg3_id.rules + 58-scsi-sg3_symlink.rules |
| - examples/sg_persist_tst.sh: add --exclusive option |
| - win32: sg_scan, sg_ses and sg_log fixes |
| - examples/sgq_dd: re-add old utility as example |
| |
| Changelog for sg3_utils-1.38 [20140401] [svn: r563] |
| - sg_ses: add --dev-slot-num= and --sas-addr= |
| - fix --data=- problem with large buffers |
| - new --data=@FN to read hex data from file FN |
| - error and warning message cleanup |
| - add --maxlen= option |
| - sg_inq: add --block=0|1 option to control opens |
| - add --inhex=FN to read response in ASCII hex from |
| a file; --inhex=FN --raw reads response in binary |
| - make -HHH (-HHHH for '-p ai') output suitable for |
| another sg_inq invocation to use --inhex to decode |
| - add LU_CONG to standard inquiry response output |
| - decode ASCII information VPD pages |
| - add HAW_ZBC in block dev char. VPD page (sbc4r01) |
| - sync version descriptors dated 20131126 |
| - allow --page=-1 to force std INQUIRY decoding |
| - fix overflow in encode_whitespaces |
| - improve unit serial number display (VPD page 0x80) |
| - sg_vpd: add LU_CONG to standard inquiry response output |
| - add --inhex=FN to read response in ASCII hex from |
| a file; --inhex=FN --raw reads response in binary |
| - decode Third Party Copy (tpc) page |
| - add HAW_ZBC in block dev char. VPD page (sbc4r01) |
| - add LTO and DDS vendor pages |
| - allow --page=num to restrict --enumerate output |
| - sg_persist: add PROUT: Replace Lost Reservation (spc4r36) |
| - add --transport-id= for SOP: 'sop,<routing_id_in_hex>' |
| - sg_readcap: for --16 show physical block size if |
| different from logical block size |
| - sg_xcopy: environment variables: XCOPY_TO_SRC and |
| XCOPY_TO_DST indicate where xcopy command is sent |
| - change default to send xcopy to dst (was src) |
| - improve CL handling of short options (e.g. '-vv') |
| - sg_luns: guard against garbage response |
| - sg_decode_sense: with --nospace ignore spaces on |
| command line, so multiple arguments are concatenated |
| - sg_write_same: repeat if unit attention |
| - sg_rtpg: fix indexing bug with --extended option |
| - sg_logs: placeholder for pending defects lpage |
| - sg_unmap: fix another problem with --grpnum= option |
| - sg_lib.h: add PDT_ZBC define (spc4r36p) |
| - sg_lib_data: sync asc/ascq codes with T10 dated 20140320 |
| - add pdt string for ZBC (spc4r36p) |
| - sg_lib: extensions to sg_get_num() and sg_get_llnum() |
| - sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out() |
| - scripts/rescan-scsi-bus.sh: check if FC driver exports |
| issue_lip before using it |
| - man page added (Linux only) |
| - scripts/59-scsi-sg3_utils.rules: linux specific udev rules |
| - examples: add sg_tst_excl3 for testing O_EXCL |
| - improve sg_tst_excl and sg_tst_excl2 |
| - add sg_tst_context for testing file handle contexts |
| - upgrade automake to version 1.13.3 |
| - add suse directory and 'spec' file to facilitate builds |
| |
| Changelog for sg3_utils-1.37 [20131014] [svn: r522] |
| - sg_compare_and_write: fix wrprotect setting |
| - add --quiet option to suppress miscompare report |
| - merge features from another implementation |
| - sg_inq: fix referrals VPD page |
| - dev_id VPD: T10 vendor id designator clean up |
| - sg_logs: improve for tape drives, general cleanup |
| - sg_persist: fix core dump on -Q option |
| - sg_unmap: fix core dump on -g option |
| - sg_vpd: dev_id VPD: T10 vendor id designator clean up |
| - cleanup up dev_id NAA-3: locally assigned |
| - sg_ses: add --nickname and --nickid options |
| - eiioe added to additional element status page (ses3r6) |
| - multiple --filter options to prune output |
| - sg_verify: improve miscompare handling |
| - rename --btychk=ndo option to --ndo=ndo (hide former) |
| - add --quiet option |
| - sg_xcopy: allow sg and bsg devices |
| - fix for bpt going negative |
| - limit each XCOPY(LID1) command to 65535 blocks |
| - fix for seek in multi-segment copies |
| - sg_sanitize: skip 15 second safety delay with --fail |
| - sg_libs: extended copy opcode renamed (spc4r34) |
| - sg_ll_receive_copy_results(): expand for all sa_s |
| - add sg_get_sense_key() |
| - add sg_ll_3party_copy_out() |
| - add dStrHexErr(): ascii hex to stderr |
| - add dStrHexStr(): ascii hex to string |
| - add SG_LIB_CAT_MISCOMPARE to categories |
| - clean header files |
| - sg_pt_freebsd: sanity check on sense_resid; fix leaks |
| - scripts/rescan-scsi-bus.sh KG's v1.57 + HR patch |
| - improve wlun handling, detect updated and resized |
| devices, better multipath support |
| - Makefile.am cleanup |
| - examples: add sg_tst_excl and sg_tst_excl2 |
| |
| Changelog for sg3_utils-1.36 [20130531] [svn: r497] |
| - sg_vpd: Protocol-specific port information VPD page |
| for SAS SSP, persistent connection (spl3r2), power |
| disable (spl3r3) |
| - block device characteristics: add FUAB bit |
| - sg_xcopy: handle more descriptor types; handle zero |
| maximum segment length; allow list IDs to be disabled; |
| improve skip/seek handling; allow xcopy on destination |
| - sg_reset: and --no-esc option to stop reset escalation |
| - clean up cli, add long option names |
| - sg_luns: add --test=ALUN option for decoding LUNs |
| - decoded luns output in decimal or hex (if -HH given) |
| - add '--linux' option to show Linux LUN after T10 |
| representation, can map one to the other |
| - sg_inq: add --vendor option to show standard inquiry's |
| vendor specific fields in ASCII |
| - take resid into account with response output |
| - sg_sync: add --16 (for 16 byte command) and --timeout= |
| - sg_logs: add data compression page (ssc4) |
| - sg_sat_set_features: increase --lba from 1 to 4 bytes |
| - sg_write_same: add --ndob option (sbc3r35d) |
| - sg_map: mark as deprecated |
| - sginfo: mark as deprecated, especially -l (list) |
| - sg_lib: improve snprintf handling |
| - sg_lib_data: sync asc/ascq codes with T10 20130117 |
| - sg_cmds (lib): if noisy given, give more UA info |
| - make code more C++ friendly |
| |
| Changelog for sg3_utils-1.35 [20130117] [svn: r476] |
| - sg_compare_and_write: new utility |
| - sg_inq+sg_vpd: block device characteristics VPD page: |
| add product_type, WABEREQ, WACEREQ and VBULS fields |
| - sg_inq: more --export option changes for udev |
| - sg_vpd: add more rdac vendor specific vpd pages |
| - sg_verify: add --ebytchk option for sbc3r34 changes |
| - sg_stpg: --offline option: fix 'Invalid state 0xe' |
| - sg_ses: Door Lock element changed to Door element and |
| abbreviation changed from 'dl' to 'do' (ses3r05) |
| - archive/rescan-scsi-bus.sh: upgrade to version 1.53hr |
| - move rescan-scsi-bus.sh to scripts directory |
| - sync to sbc3r34 |
| - sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field |
| - sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17 |
| - clean up man page summary lines |
| |
| Changelog for sg3_utils-1.34 [20121013] [svn: r461] |
| - sg_xcopy: new dd like utility for extended copy command |
| - sg_copy_results: new utility for receive copy results |
| - sg_verify: add 16 byte cdb, bytchk (data-out buffer) |
| and group number support |
| - sync to spc4r36 and sbc3r32 |
| - sg_inq: add --export so sg_inq can replace udev's scsi_id |
| - decode old EMC Symmetrix abuse of VPD page 0x83 |
| - sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83 |
| - sg_ses: increase max dpage response size to 64 KB |
| - allow ident,locate on enclosure controller |
| - more sanity for additional element status descriptor |
| - sg_sanitize: add --ause, --fail and --test= |
| - sg_luns: add long extended flat space addressing format |
| - sg_logs: add ATA pass-through results lpage (SAT-2) |
| - sg_rtpg: add --extended option |
| - sg_senddiag: list rebuild assist diag page name |
| - sg_pt_linux: expand DID_ (host_byte) codes |
| - cope with a transport error plus sense data |
| - prefer major() over MAJOR() macro |
| - sg_lib: fix sg_get_command_name() service actions |
| - report sdat_ovfl bit (if set) in sense data |
| - decode extended_copy and receive_copy service actions |
| - decode read_buffer and write_buffer modes |
| - decode ATA PT fixed format sense (SAT-2) |
| - sg_cmds_extra: add sg_ll_report_tgt_prt_grp2() |
| - ./configure options: |
| - change --enable-no-linux-bsg to --disable-linuxbsg |
| - add --disable-scsistrings to reduce utility sizes |
| |
| Changelog for sg3_utils-1.33 [20120118] [svn: r435] |
| - sg_ses: major rework of indexes (again), now two level |
| - sg_write_buffer: new --specific option for mode specific |
| field; new mode 13 (spc4r32) |
| - sg_vpd: add hp3par volume info vendor VPD page |
| - fix 'scsi ports' [0x88] page problem |
| - add 'sinq' pseudo page for standard inquiry response |
| - add power consumption page |
| - sg_format: add --poll= option for request sense polling |
| - improve handling of disks > 2 TB and DIF (protection) |
| - sg_logs: LB provision lpage extra (sbc3r28) |
| - sg_modes: application tag mpage subcode 0xf0->0x2 |
| - sg_write_same: no prot fields when wrprotect=0 |
| - sg_get_lba_status: reflect change in sbc3r25 to Parameter |
| Data Length response field (offset reduced from 8 to 4) |
| - sg_inq, sg_vpd: sync with spc4r33 |
| - win32: change DataBufferOffset type per MSDN; caused |
| problem with 64 bit machines (with buffered interface) |
| - sg_luns: tweak documentation for vendor specific reports |
| - add man pages for scsi_loging_level, scsi_mandat, |
| scsi_satl and scsi_temperature |
| |
| Changelog for sg3_utils-1.32 [20110730] [svn: r410] |
| - sg_sanitize: new utility for command added in sb3r27 |
| - sg_sat_identify: add '--ident' to output WWN |
| - sg_ses: major rework of descriptor output |
| - add --index, --descriptor, --join, --clear, --get, |
| and --set options |
| - sg_raw: exit status corrections |
| - sg_decode_sense: add --nospace and --hex options |
| - sg_logs: fix bug with large --maxlen |
| - zero response length when resid implies it is invalid |
| - add scope field to lb provisioning lpage (sb3r27) |
| - sg_inq: sync version descriptors with spc4r31 |
| - sg_lib_data: sync asc/ascq codes with spc4r31 |
| - sg_vpd: add LBPRZ field in LB provisioning VPD page |
| - sg_format: allow format of pdt 7 (some MO drives) |
| - sg_cmds_basic: sg_cmds_process_resp() handle status good |
| with a sense key other than no_sense (e.g. completed) |
| - add README.iscsi |
| |
| Changelog for sg3_utils-1.31 [20110216] [svn: r386] |
| - sg_decode_sense: new utility to decode sense data |
| - sg_vpd: LB provisioning + Block limits pages (sbc3r26) |
| - sync asc/ascq and version descriptors with spc4r28 |
| - sg_get_config, sg_rmsn, sg_verify: add --readonly option |
| - sg_lib: implement forwarded sense data descriptor |
| - decode user data segment referral sense data descriptor |
| - sg_lib, sg_turs, sg_format: more precision for progress |
| indication (two places after decimal point) |
| - sg_lib(win32): add runtime selection of SPT direct or |
| indirect interface |
| - sg_read_buffer+sg_write_buffer: set SPT direct |
| - add examples/forwarded_sense.txt + examples/ref_sense.txt |
| |
| Changelog for sg3_utils-1.30 [20101111] [svn: r363] |
| - sg_referrals: new utility for REPORT REFERRALS |
| - sbc3r25 renames 'thin' provisioning' to 'logical block |
| provisioning': changes in sg_format, sg_inq, sg_logs, |
| sg_modes, sg_readcap, sg_vpd |
| - sg_inq: update version descriptor list to spc4r27 |
| - extended inquiry vpd page add extended self test |
| completion minutes field |
| - sg_lib: sync asc/ascq list to spc4r27 |
| - dStrHex(): trim excess trailing spaces |
| - sg_read_long: add --readonly option (open() is rw) |
| - sg_raw: add --readonly option (open() is rw) |
| - allow bidirectional commands |
| - sg_vpd: rdac vendor page [0xc8] parse corrections |
| - extended inquiry vpd page add extended self test |
| completion minutes field |
| - sg_ses: expand --data (in) buffer to 2048 bytes |
| - sg_opcodes: add extended parameter data for TMFs (spc4r26) |
| - sg_dd: clean count calculation, document nocache flag |
| - treat bsg devices as implicit sg_io |
| - add more conversions |
| - sg_write_same: if READ CAPACITY(16) fails try 10 byte variant |
| - anticipate approval of proposal to allow UNMAP and ANCHOR |
| bits to be set on WRITE SAME(10) with '--10' option |
| - sg3_utils man page: sections added for OS device names |
| |
| Changelog for sg3_utils-1.29 [20100406] [svn: r334] |
| - sg_rtpg: new logical block dependent state and bit (spc4r23) |
| - sg_start: add '--readonly' option for ATA disks |
| - sg_lib: update asc/ascq list to spc4r23 |
| - sg_inq: update version descriptor list to spc4r23 |
| - sg_vpd: block device characteristics page: fix form factor |
| - update Extended Inquiry VPD page to spc4r23 |
| - update Block Limits VPD page to sbc3r22 |
| - update Thin Provisioning VPD page to sbc3r22 |
| - Automation device serial number and Data transfer device |
| element VPD pages (ssc4r01) |
| - add Referrals VPD page (sbc3r22) |
| - sg_logs: add thin provisioning and solid state media log pages |
| - addition of IBM LTO specific log pages |
| - sg_modes: new page names from ssc4r01 |
| - sg_ses: sync with ses3r02 (SAS-2.1 connector types) |
| - sg_unmap: add '--anchor' option (sbc3r22) |
| - sg_write_same: add '--anchor' option (sbc3r22) |
| - sg_pt interface: add set_scsi_pt_flags() to permit passing |
| through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags |
| - add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL |
| - add AM_MAINTAINER_MODE to configure.ac to lessen build issues |
| - add BSD_LICENSE file to this and lib directories, refer to |
| it from source and header files. Some source has GPL license |
| |
| Changelog for sg3_utils-1.28 [20091002] [svn: r315] |
| - sg_unmap: new utility for thin provisioning |
| - add examples/sg_unmap_example.txt |
| - sg_get_lba_status: new utility for thin provisioning |
| - sg_read_block_limits: new utility for tape drives |
| - sg_logs: add cache memory statistics log (sub)page |
| - sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19) |
| - sg_vpd: add Thin provisioning VPD page (sbc3r20) and |
| TapeAlert supported flags VPD page |
| - sg_inq: note VPD page support better in sg_vpd |
| - sg_persist: add transport specific transportID format |
| - allow transportIDs to be read from named file |
| - sg_opcodes: allow --opcode= option to take OP and SA |
| values (comma separated) |
| - tweak print format, remove test code |
| - sg_requests: remove test code in progress calculation |
| - sg_reset: add target reset option |
| - sg_luns: reduce default maxlen to 8192 (for FreeBSD) |
| - sg_raw: extend max cdb length from 16 to 256 bytes |
| - align heap allocs to page boundaries |
| - sg_lib: sg_set_binary_mode() needs config.h included |
| - add progress indication sense data descriptor (0xa) |
| - change SG3_UTILS_* constants to SG_LIB_* |
| - decode service actions within persistent reserve in/out |
| - sync with spc4r21 |
| - sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status() |
| - sg_pt_linux: fix check condition but empty sense buffer; occurred |
| when sg v3 node used and /usr/include/linux/bsg.h visible |
| - major() macro grief, if present include <linux/kdev_t.h> and |
| use MAJOR() instead |
| - scripts/sas_disk_blink: moved from this package to sdparm |
| - utils/hxascdmp: in Windows set binary mode on read files |
| - examples/sg_persist_tst.sh: add PRIN read full status command |
| - sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows |
| set binary mode on read files |
| - sg_pt_win32: default to non-direct variant of SPT interface |
| - use './configure --enable-win32-spt-direct' to override |
| - non-direct data length set to 16 KB, extended if required |
| - debian: incorporate patch from debian sid |
| |
| Changelog for sg3_utils-1.27 [20090411] [svn: r250] |
| - sg_write_same: new utility: 10, 16 and 32 byte cdb variants |
| - sg_inq: sync version descriptors with spc4r18 |
| - add power condition VPD page |
| - expand block limits VPD page (sbc3r18) |
| - sg_vpd: add power condition VPD page |
| - expand block limits VPD page (sbc3r18) |
| - sg_map26: fix for lk 2.6.26 when CONFIG_SYSFS_DEPRECATED_V2 |
| is not defined |
| - output cdb when verbose option given |
| - correct tape minors >= 32 |
| - sg_dd: flock flag (does LOCK_EX|LOCK_NB) |
| - switch open on input for sg device nodes: first open |
| read-write and if that fails try opening read-only |
| - experiment with of2=OFILE2; add conv=sparse |
| - use posix_fadvise() to defeat caching of normal+block files |
| when new 'nocache' flag given |
| - sg_dd copied to own package called ddpt |
| - sg_dd, sgm_dd, sgp_dd: accept 'count=-1' for calculate count, |
| accept '-V' for version string |
| - sg_get_config: add OSSC feature [mmc6r02] |
| - sg_modes: add ATA power condition mode page |
| - sg_logs: protocol specific (SAS) lpage sync to sas2r15 |
| - power condition transitions lpage (added in spc4r18) |
| - extra parameters for start-stop cycle counter lpage |
| - sg_format: add '--fmtpinfo=' and '--pie=' options (sbc3r18) |
| - sg_readcap: more protection + thin provisioning (sbc3r18) |
| - add a '--16' option for 16 byte cdb version |
| - sg_persist: code clean up |
| - allow '--transport-id=' argument to use space as separator |
| - add '--alloc-length=' argument |
| - sg_scan: (win32) new format, scsi adapter scan optional |
| - sginfo: fix crash when 1024 sg device nodes (or more) |
| - sg_ses: allow '--data=' argument to use space as separator |
| - sg_senddiag: allow '--raw=' argument to use space as separator |
| - sg_reassign: allow '--address=' argument to use space as |
| separator |
| - sg_wr_mode: allow '--contents=' and '--mask=' arguments to |
| use space as separator |
| - sg3_utils.spec: correction to configure call |
| - sg_pt: add scsi_pt_open_device_flags() call |
| - add scsi_pt_version() and clear_scsi_pt_obj() calls |
| - clear os_err at start of do_scsi_pt() |
| - add linux bsg support via runtime detection |
| - sg_cmds: add sg_cmds_open_device_flags() |
| - sg_cmds_extra: sg_ll_format_unit: remove rto_req argument, |
| the expanded fmtpinfo argument subsumes it. |
| - clearer split between Linux and Windows only code and doc |
| - automake tools: change to what Ubuntu 8.10 provides |
| - Ubuntu 8.10 libtool problems -> Debian 4.0 |
| |
| Changelog for sg3_utils-1.26 [20080625] [svn: r183] |
| - sg_sat_phy_event: new utility; copied from examples |
| directory and enhanced, rename original to sg__sat_phy_event |
| - sg_ses: sync with ses2r19b, many nomenclature changes |
| - sg_get_config: sync with mmc6r01 |
| - allow Microcode upgrade and DVD read feature descriptors |
| to be 4 bytes long |
| - add '--raw' option |
| - sg_verify: add --vrprotect= option |
| - sg_vpd: add nominal form factor to block dev. char. VPD page |
| - add --maxlen= option to set allocation length in cdb |
| - sg_inq: add --maxlen= option that does same as --len= |
| - move version descriptors (spc4r15) to sg_inq_data.c file |
| - sg_inq+sg_vpd: logic for "NAA-3 Locally assigned" identifier |
| - update extended inquiry VPD page |
| - sg_modes: add --maxlen= option to specify allocation length |
| - sg_start: add '--noflush' and '--mod=PC_MOD' options (sbc3r14) |
| - sg_request: add a '--progress' option (similar to sg_turs) |
| - add --maxlen= option to set allocation length in cdb |
| - sg_luns: add --maxlen= option to specify allocation length |
| - sg_dd: improve MMC handling of 'illegal mode for this track' |
| read errors (with ILI and info field) |
| - sg_dd, sgm_dd, sgp_dd, sginfo, sg_rbuf, sg_read: replace |
| "%lld" and friends with PRI macros |
| - sg_opcodes: tmf name change in spc4r15 (async event) |
| - sg_turs: add more to man page about '--progress' indication |
| - sg_write_long: add examples section to man page |
| - '--raw' option: modify utilities that can send binary output |
| to call sg_set_binary_mode(). For MingGW port CR problem. |
| - sg_lib: update asc/ascq and command name strings to spc4r15 |
| - split sg_lib into sg_lib_data.[hc] and sg_lib.[hc] |
| - split sg_cmds_extra into sg_cmds_extra and sg_cmds_mmc |
| - add osd2r03 service actions (all different from osd-r10) |
| - add sg_get_trans_proto_str() |
| - add sg_get_sense_filemark_eom_ili() function (MMC uses ILI) |
| - add sense key specific unit attention condition queue |
| overflow decoding (added in spc4r13) |
| - add sg_set_text_mode() and sg_set_binary_mode() functions |
| for non-Unix OSes |
| - sg_cmds_mmc: add sg_ll_set_streaming() function |
| - sg_cmds_extra: add vrprotect argument to sg_ll_verify10() |
| - add sg_ll_get_performance() and sg_ll_set_cd_speed() |
| - change 'long long' to int64_t and 'unsigned long long' to |
| uint64_t to stress that 64 bit integer wanted, not larger |
| - audit of dangerous 'u64 = uch[24] << 24' code, replace most |
| 'unsigned long's |
| - multiple documentation corrections provided by Dan Horak |
| - win32/MinGW: define SG3_UTILS_MINGW when detected |
| - remove archive/pre_configure subdirectory |
| - move sg_io_linux.c into the lib subdirectory |
| - utils/hxascdmp: add hxascdmp(1) man page |
| - switch primary build to ubuntu environment, rename |
| library to libsgutils2 to avoid clash |
| |
| Changelog for sg3_utils-1.25 [20071016] [svn: r115] |
| - sg_stpg: new utility to Set Target Port Groups |
| - sg_safte: new utility to query SAF-TE processor (SES like) |
| - sg_sat_set_features: new utility (actually copied from examples |
| directory); renamed examples version to: sg__sat_set_features |
| - sg_read_buffer: restore (had fallen out of build scripts) |
| - sg_dd: add oflag=sparse to step over bs*bpt number of zeros; |
| - with oflag=sparse, write last bs*bpt segment at end or after |
| error so file length of OFILE is appropriate |
| - when coe>1 then SCSI READ LONG logic remembers extended block |
| length of first encountered error |
| - sg_dd, sgm_dd, sgp_dd: allow iflag=null and oflag=null both of |
| which do nothing (placeholders) |
| - sg_ses: sync with ses2r17 then r18 |
| - sg_vpd, sg_inq: add block device characteristics VPD page |
| - sg_inq: add '--vpd' option (or '-e') for backward compatibility |
| - sg_vpd: decode protocol specific lu information page for SAS |
| - add more RDAC vendor VPD pages |
| - sg_logs: update background scan results log page, sbc3r11 |
| - add generation code to protocol specific page for SAS SSP |
| - add media changer diagnostic data log page |
| - sg_raw: fix error message when do_scsi_pt() fails |
| - sg_lib: sync asc/ascq codes with spc4r11 |
| - add sg_get_num_nomult() |
| - add TPROTO_* protocol identifier constants to sg_lib.h |
| - sg_cmds_extra: add sg_ll_set_tgt_prt_grp() |
| - place source in subversion repository |
| - split code into src/ lib/ and include/ directories |
| - sync debian directory with their 1.24 version (sid unstable) |
| - convert build logic to use autotools (i.e. './configure ; make') |
| - rename this file from CHANGELOG to ChangeLog |
| - note: only code in lib/ and src/ directories built by |
| autotools; some other subdirectories still use hand-crafted |
| Makefiles |
| |
| Changelog for sg3_utils-1.24 [20070507] [svn: r77] |
| - sg_raw: new utility to send arbitrary SCSI commands |
| - sg_luns: increase number of luns that can be fetched |
| - fix length of raw and hex output |
| - add '--quiet' option to output only ASCII hex |
| representation of each lun |
| - sg_rtpg: update for changes in spc4r09 |
| - sg_persist: update documentation, spc-4 references |
| - fix exit status values |
| - sg_inq: update version descriptors per spc4r09 |
| - fix '--id' and '--extended' |
| - extend block limits VPD page (sbc3r09) |
| - sg_vpd: extend block limits VPD page (sbc3r09) |
| - append relative target port identifier to SAS target |
| port address with '-iq' option |
| - sg_logs: add decoding for stats+performance log pages |
| - fix showing of page names for pdt > 0 |
| - implement '-HH' for single and all pages, fix '-r' |
| - when '--maxlen=' given, only do single fetch |
| - add Tape Alert (ssc), Media and Element statistics (smc) pages |
| - add '--brief' option |
| - sg_ses: sync with ses2r16 |
| - fix bay number for SAS |
| - sg_format: add '--dcrt' and '--security' options |
| - sgm_dd: add 'smmap' oflag for shared_mmap_io testing |
| - add 'dio' oflag |
| - sg_dd, sgp_dd: add 'dio' iflag and oflag |
| - sg_modes: change SAS mode page names per sas2r09 |
| - check validity of block descriptors length |
| - sg_pt: change opaque context object from 'void *' |
| to 'struct sg_pt_base *' |
| - sg_opcodes: anticipate extra tmfs from 07-159r0 |
| - sg_sat_set_features: add more usage information |
| - add man page |
| - sg_sat_phy_event: add to examples directory |
| - sg_lib: sync asc/ascq codes with spc4r10 |
| - Solaris port: using uscsi interface |
| - various .html files removed from doc directory |
| |
| Changelog for sg3_utils-1.23 [20070131] [svn: 75] |
| - sg_read_buffer: new utility |
| - sg_write_buffer: new utility |
| - sg_opcodes, sg_senddiag, sg_logs, sg_modes, sg_start, sg_inq, |
| sg_turs, sg_readcap, sg_rbuf: add getopt_long() based cli; |
| old and new cli selectable, new getopt_long cli is default |
| - scripts: new subdirectory containing some bash scripts |
| - add scripts/README file |
| - sg_reassign: add '--hex' option for grown and primary lists |
| - sg_rtpg: add '--raw' option |
| - sg_lib.h, sg_cmds_basic.h + sg_cmds_extra.h: add C++ |
| 'extern "C" ' wrappers |
| - cleanup C code so it will compile as C++ |
| - sg_lib: sync with spc4r08 |
| - include <inttypes.h>, use PRId64 instead of %lld form |
| - fix sg_get_sense_str() when empty sense buffer |
| - win32 port: add Makefile.mingw + related support for MinGW |
| - sg_cmds_extra: add sg_ll_read_buffer() and sg_ll_write_buffer() |
| - sg_dd, sgp_dd, sgm_dd, sg_read: use lseek64() instead of llseek.c |
| - sgm_dd: accept coe=<n> for interworking with sg_dd |
| - sg_rdac: fix on non-linux ports |
| - sg_ses: fix spurious warning in additional element status page |
| - '-rr' option outputs a diagnostic page in binary to stdout |
| - sg_opcodes: add command timeout descriptor support (spc4r08) |
| - change linux specific pass through to generic pass through |
| - sg_logs: add 'name=value' decoding for SAS specific lpage |
| - examples+utils subdirectories: remove symlinks |
| - synchronize man pages with usage messages |
| - sg3_utils.spec: rework |
| |
| Changelog for sg3_utils-1.22 [20061016] [svn: 72] |
| - sgp_dd: accept verbose=<n> as well as deb=<n> to ease |
| interworking with sg_dd and sgm_dd |
| - sg_sat_set_features: added to examples directory |
| - sg_lib: sync asc/ascq text with spc4r06 |
| - move SG_LIB_CAT_NO_SENSE and SG_LIB_CAT_RECOVERED to |
| 20 and 21 respectively; add SG_LIB_CAT_ABORTED_COMMAND |
| at 11 (its sense key value) |
| - sg_vpd: tweak '--page=sp --quiet' output |
| - change '-HHH' so same as '-rr' (prepares ATA Information |
| (ai) response for hdparm) |
| - sg_requests: add '-s' option to set exit status from |
| parameter data |
| - sg_modes: exit quickly from '-e' if device not ready |
| - sg_logs: sync sas log pages with sas2r05a |
| - expand background scan results log page |
| - add '-m=<max_len>' to limit response length |
| - drop '-scum' and '-sthr' options and add '-select' |
| - sg_write_long: add '--16' option to send 16 byte cdb |
| - add '--wr_uncor' and '--pblock' options |
| - sg_senddiag: cleanup and add sdiag_sas_p1_stop.txt |
| to examples directory |
| - sg_format: add '--cmplst=<n>' option (default: 1) |
| - add '--pfu=<n>' option |
| - expand man page to discuss P/D/C/GLISTs |
| - sg_reassign: add '--primary' option to fetch primary |
| defect list (PLIST) length |
| - sg_readcap: add '-H' option to output response in hex |
| and '-r' to output response in binary to stdout |
| - add logical blocks per physical block (sbc3r07) |
| - sginfo: add PLIST and GLIST designation to defect lists |
| - sg_cmds: split this support file into sg_cmds_basic.[hc] |
| and sg_cmds_extra.[hc] |
| - add sg_ll_ata_pt() (SATL ATA pass) to sg_cmds_extra.[hc] |
| - sg_rdac: fix includes for FreeBSD |
| - sg_dd: add 'coe_limit=' option to exit after <n> |
| consecutive 'coe' type read errors |
| - sgm_dd: print out throughput information when signal arrives |
| if time=1 (like sg_dd does already) |
| - sg_inq: change '-HHH' so same as '-rr'. Now sg_inq, sg_vpd |
| and sdparm output for hdparm with '-HHH' |
| -add '-l=<resp_len>' option |
| - sg_read_long: add '--pblock' option for physical blocks |
| - sg_luns: add '--hex' and '--raw' options |
| - sg_requests: add '--hex' and '--raw' options |
| - sg_scan: windows version added (was previously linux only) |
| - 2 man pages: sg_scan.8l and sg_scan.8w that are installed |
| as sg_scan.8 |
| - archive directory: removed all but rescan-scsi-bus.sh |
| - README points to previous version in that directory |
| - sg_sat_identify: add to main directory |
| - rename earlier version to examples/sg__sat_identify.c |
| - sg_ident: rework as spc4r07 changed command names and |
| expanded functionality |
| |
| Changelog for sg3_utils-1.21 [20060706] [svn: 70] |
| - sg_vpd: new utility for decoding VPD pages. sg_inq's cli is |
| cluttered; also borrows from sdparm's VPD handling |
| - sg_rdac: new utility for vendor specific work |
| - sg_lib: add sg_vpd_dev_id_iter() to iterate over di VPD page |
| - add sg_ata_get_chars() to fetch chars from ATA words |
| - sync additional sense code strings with spc4r05a |
| - add SG_LIB_CAT_NOT_READY category when sense_key is NOT READY |
| - add SG_LIB_FILE_ERROR category for open problems |
| - add SG_LIB_SYNTAX_ERROR category for command line problems |
| - broaden SG_LIB_CAT_MEDIA_CHANGED to SG_LIB_CAT_UNIT_ATTENTION |
| - add SG_LIB_CAT_MALFORMED for bad responses |
| - BEWARE: these changes cause confusion if an executable from this |
| version is run with a libsgutils library from 1.20 or earlier |
| - sg_cmds: add SG_LIB_CAT_NOT_READY return to most "ll" functions |
| - alter many utilities to report SG_LIB_CAT_NOT_READY |
| - sg_dd: add retries=<n> option for sg_io |
| - sg_logs: add '-T' option to output protocol specific port log page |
| - add support for log subpages (new in spc4r05) |
| - more sanity checks in Start Stop Cycle Counter page |
| - sg_cmds: add sg_ll_read_long16() |
| - add page_code and subpage_code to sg_ll_log_select() |
| - add subpage_code to sg_ll_log_sense() |
| - sg_read_long: do READ LONG(16) when '--16' given |
| - sg_read: accept and ignore 'of=' arguments |
| - sg_dd: expand medium/hardware error "coe' processing to include |
| the "blank check" sense key (for optical devices) |
| - sg_ses: expand display element (per 05-011r2) |
| - sg_format: clear 'cmplst' bit (for MO disks) |
| - add '--six' ('-6') option for mode sense/select(6) |
| - sg_format + sg_test_rwbuf: fix for when char is unsigned |
| - sg_inq: VPD page 0x89: output ATA IDENTIFY DEVICE strings |
| - for IDENTIFY (PACKET) DEVICE response use sg_ata_get_chars() |
| - sg3_utils.html : new name, was previously u_index.html. Copy |
| placed in doc subdirectory |
| - tools.html : SCSI and storage tools reference, copy placed in |
| doc subdirectory |
| - sg3_utils.8 : add a new man page containing general information |
| especially common exit status values |
| - sg_sat_identify: added to examples directory (SAT passthrough test) |
| - extend to pass through IDENTIFY PACKET DEVICE with '-p' option |
| - sg_sat_chk_power: added to examples directory |
| - sg_sat_smart_rd_data: added to examples directory |
| - sg_chk_asc: added to utils directory to check asc_ascq codes |
| - debian: stop placing archive directory under examples |
| - add build_debian.sh script |
| |
| Changelog for sg3_utils-1.20 [20060418] [svn: 68] |
| - sg_logs: decode phy event descriptors in SAS port specific |
| log page (sas2r03) |
| - new parameter control byte format (spc4r03), subpages to come |
| - update Makefile (linux) to install sg_io_linux.h + sg_linux_inc.h |
| - sg_map26: fix for block device mapping in lk 2.6.16-rc1 and beyond |
| - cope with sysfs removal of 'generic' symlink post lk 2.6.16, |
| anticipate removal of 'tape' symlink |
| - sg_dd, sgm_dd, sgp_dd: fix problem around 0x7fffffff blocks |
| - sg_dd: fix read_long processing error (when 'coe=2' or 3) |
| - expand 'coe=' to take 0...3 (invokes read long with 2 or 3) |
| - allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature |
| - sgp_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd) |
| - sgm_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd) |
| - sg_get_config: double->dual renaming (mmc5r03) |
| - sg_read: add 'dpo=' and 'fua=' options |
| - allow 'count' < 0 (or 'bpt=0') for issuing zero block READs |
| - allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature |
| - add 'no_dxfer=0|1' option |
| - sg_modes: fix exit value when MODE SENSE fails |
| - add '-e' to examine presence of page codes from 0x0 to 0x3e |
| - sg_requests: add '--num=' and '--time' options for timing multiple |
| invocations |
| - sg_inq: fix vpd 0x83 designator code 8 name: "scsi name string" |
| - sg_scan: if lk 2.6, use sysfs to find active sg device nodes |
| - sg_map: if lk 2.6, use sysfs to find active sg device nodes |
| - sg_ses: expand display element (per 05-011r1) |
| - sg_start: add an '-i' option which is equivalent to '--imm=1' |
| - sg_senddiag: update man page showing use of two scripts in |
| examples directory (sdiag_sas_p0_cjtpat.txt and _p1_) |
| - sg_lib: fix sg_get_sense_descriptors_str() case 9 (ATA Return) |
| |
| Changelog for sg3_utils-1.19 [20060127] [svn: 66] |
| - sg_start: accept '--' options (e.g. 'sg_start --stop') |
| - add '--fl=<n>' option for jump to format layer (mmc5) |
| - sg_logs: background scan log page, resync with sbc3r03 |
| - add '-scum' and '-sthr' for setting defaults |
| - add device statistics log page (ssc + adc) |
| - fix "last n" deferred errors/error events incrementing |
| - partial addition of log subpages (spc4r03) |
| - sg_get_config: sync features with mmc5 rev 02b |
| - sg_wr_mode: mask out dpofua bit in mode select header |
| - sg_inq: try harder with '-A' to identify ATA device |
| - broaden meaning of '-d' option to decode ... |
| - decode software interface id VPD page ('-p=84 -d') |
| - decode device capabilities (ssc) VPD page ('-p=b0 -d') |
| - sginfo: correct defect list handling ('-d' and '-G') |
| - sg_verify: improve error processing (e.g. medium errors) |
| - sg_ses: scsi target_initiator port additional element |
| status (ses2r14) |
| - many: arguments that currently accept '0x' or '0X' to |
| indicate a hex number may alternatively take a trailing |
| 'h' or 'H' to indicate hex |
| - sg_lib: update asc/ascq strings (spc4r03) |
| - sg_lib+sg_cmds: make independent of linux via |
| sg_pt.h function based interface. |
| - linux pass through code placed in sg_pt_linux.c |
| - rename sg_include.h to sg_linux_inc.h |
| - linux specific code in sg_lib.[hc] moved to |
| sg_io_linux.[hc] |
| - port to FreeBSD: using sg_pt_freebsd.c |
| - port to Tru64: using sg_pt_osf1.c |
| - sg_cmds: add sg_ll_get_config(), sg_ll_format_unit(), |
| sg_ll_reassign_blocks(), sg_ll_persistent_reserve_in+out(), |
| sg_ll_read_long10(), sg_ll_verify10(), sg_ll_write_long10() |
| - sg_persist: add "allow commands" to report capabilities |
| - sg_persist_tst: (examples) takes device node as argument |
| - sg_luns: add "security protocol" wlun |
| |
| Changelog for sg3_utils-1.18 [20051118] [svn:63] |
| - sg_map26: new utility to map sg devices in lk 2.6 |
| - sg_luns: luns > 16,384 (sam-4 rev 4) |
| - sg_ses: bump fan speed field to 11 bits |
| - SAS connector names (ses2r13) |
| - sg_inq: add '-rr' option for "hdparm --Istdin" |
| - sg_get_config: tracking mmc-5 |
| - sg_write_long: add support for COR_DIS bit |
| - sg_cmds: add sg_ll_test_unit_ready_progress() |
| - sg_turs: '-p' option shows progress |
| - sg_dd: add 'iflag=' and 'oflag=' options |
| - remove output of mode page info when verbose > 0 |
| - add control of DPO bit via iflag/oflag |
| - sg_lib: add sg_get_pdt_str() |
| - update asc/ascq strings |
| - sg_modes + sginfo: add SAS(2) SSP shared mode subpage |
| - doc: rename "html" directory to "doc" |
| - Makefile: add 'libtool --finish' to install |
| |
| Changelog for sg3_utils-1.17 [20050922] [svn: 60] |
| - sg_inq: add '-a' option for ATA information VPD page |
| - add '-b' option for Block limits VPD page (SBC) |
| - add '-A' option for probing ATA or ATAPI device |
| - increase raw ('-r') and verbose ('-v') output for |
| ATA(PI) devices to 512 bytes (was 256 bytes) |
| - output hex ('-H') and verbose response for ATA(PI) |
| devices in 16 bit words (corrected for endianness) |
| - output bytes if '-HH' option given |
| - sync with spc4 rev 02 |
| - sg_lib: add dWordHex() and sg_is_big_endian() |
| - sync asc/ascq with spc4 rev 02 |
| - sg_cmds: defensive prefill for inquiry commands |
| - sg_opcodes: sync with spc4 rev 02 (add tmf I_T nexus reset) |
| - sginfo: add EBACKERR in Informational exception mode page |
| - add Background control mode page (SBC-3) |
| - sgm_dd: add 'verbose=<n>' option |
| |
| Changelog for sg3_utils-1.16 [20050810] [svn: 58] |
| - sg_ident: new utility to report+set device identifier |
| - sg_map: increase MAX_SG_DEVS from 256 to 2048 |
| - debian: new directory to support deb package builds |
| - sg_get_config: add '--current' option, same as '--rt=1' |
| - update for DVD+RW Dual Layer |
| - sg_inq: add notes in source about use of SCSI INQUIRY |
| - decode Management network addresses VPD page ('-m') |
| - decode Mode page policy VPD page ('-M') |
| - sginfo: increase device mapping capability (> 78 disks) |
| - add '-r' option to scan /dev/raw* device nodes [Tim Hunt] |
| - sg_dd: change bpt default value to 32 when bs >= 2048 bytes |
| - sg_ses: mention SAF-TE in man page |
| - sg_readcap: add '-b' option for brief output (2 hex numbers) |
| - sg_cmds: add sg_ll_start_stop_unit(), sg_ll_prevent_allow(), |
| sg_ll_report_dev_id() and sg_ll_set_dev_id() |
| - sg_lib: add extra argument to sense print functions to enable |
| the suppression of the raw output of the sense buffer |
| - resid > 0 warnings now includes number actually fetched |
| - sg_start: add '-load' and '-eject' options |
| - default to start action when no other indication given |
| - change -imm=0|1 option default to 0 (was 1) |
| - gcc 4.0: cleanup warnings (apart from sgp_dd: revisit later) |
| |
| Changelog for sg3_utils-1.15 [20050605] [svn: 56] |
| - sg_cmds: sg_get_mode_page_controls(): improve error processing, |
| add double fetch |
| - sg_turs, sg_rbuf, sg_requests, sg_test_rwbuf, sg_format, |
| sg_dd and sgm_dd: add O_NONBLOCK to open() |
| - sgm_dd: switch to use SG_IO ioctl (that leaves only |
| sgp_dd using the asynchronous sg write()/read() sequence) |
| - sg_ses: sync with rev 12 changes |
| - sg_map: extend to cope with sparse disk device names with |
| up to 3 letters (e.g. /dev/sdaaa) [Nate Dailey] |
| - sg_modes: add '-f' option to flexibly decode broken mode |
| sense responses. |
| - zero prefill response; stop decoding response after 3 |
| unit attention mode pages seen (i.e. malformed) |
| - add '-L' option for LLBAA bit in msense 10 cdb |
| - sg_reset: update man page |
| - sg_inq: VPD page 0x83: output eui addresses in hex as well |
| - Makefile: fix bug in rules for sgp_dd (when 'make dep' used) |
| - sg_format: expand explanations in its man page |
| - sg_inq, sg_logs, sg_modes, sg_opcodes, sg_rbuf, sg_readcap, |
| sg_scan, sg_senddiag, sg_start and sg_turs: allow command |
| line to take concaternated options |
| - sg_start: add -start and -stop to parallel "1" and "0" |
| - sg_senddiag: set pf bit with '-l' option |
| |
| Changelog for sg3_utils-1.14 [20050506] [svn: 54] |
| - sg_rmsn: new utility to read media serial number |
| - sg_rtpg: add T_SUP bit report |
| - sg_ses: ses-2 rev 11 changes (mainly to additional element status) |
| - add 'bay number' to SAS additional element status |
| - sg_modes: recognise attached enclosure and medium changer |
| - sg_inq: spell out non-zero peripheral qualifiers |
| - note VS bit preceding MultiP(ort) when latter set |
| - VPD page 0x83: output naa addresses in hex as well |
| - sginfo: recognise attached enclosure and medium changer |
| - increase device mapping capability (to 78 disks) |
| [Tim Hunt] |
| - sg_senddiag: add option to send raw diagnostic page |
| - sg_get_config: update some BD information |
| - sg_reasign: add '-g' option to give grown defect list length |
| - sg_dd: note default bpt value (128) may be too high for cd/dvds |
| - sg_lib: sync with SPC-3 rev 22a [opcodes + asc/q] |
| - add DID_IMM_RETRY and DID_REQUEUE [linux specific "host" bytes] |
| - sg_cmds: add send+receive diagnostic, read defect data commands |
| - add duration output on some commands when verbose > 2 |
| - spec: change to produce libsgutils (and -devel variant) as well as |
| sg3_utils binary rpms |
| - sdparm: new utility like hdparm but for SCSI disks (or other devices) |
| - moved to its own package called: sdparm |
| |
| Changelog for sg3_utils-1.13 [20050313] [svn: 52] |
| - sg_format: new utility to format disks (perhaps change block size) |
| - sg_ses: rename "device element" to "additional element" [SES-2 rev 10] |
| - add SAS expander and connector elements; add download |
| microcode and subenclosure nickname diagnostic pages |
| - fix additional element descriptor for SAS |
| - off by 1 error when no type descriptor text in config page |
| <David dot Baldwin at anu dot edu dot au> |
| - sg_logs: log page for background media scan results |
| - sginfo: add "-flba64" option for outputting 64 bit lba defect lists |
| - sg_get_config: additions for BD from MMC-5 rev 1b |
| - sg_lib: add SG_LIB_CAT_ILLEGAL_REQ sense category |
| - add sg_get_sense_progress_fld() |
| - SPC-3 rev21d updates: report + set timestamp |
| - sg_get_num() + sg_get_llnum(): switch to multipliers that |
| are compatible with SI and with IEC 60027-2. Used modern |
| GNU's dd command as guide. |
| - report field replaceable unit code in fixed format |
| - sg_dd: add logic to use read_long on unrecovered read errors when |
| 'coe' set, read just prior to error if 'coe' clear |
| - both 'odir' and 'blk_sgio" are honoured on block devices |
| - add 'verbose' switch, output some mode page info when verbose |
| - print out elapsed time/throughput when signal received |
| - add new web page discussing sg_dd, copy in html subdirectory |
| - sg_read: add 'blk_sgio' and 'odir' options |
| - sg_wr_mode: clear mode data length in mode select(10) |
| - sg_test_rwbuf: add long options, allow test to run multiple times |
| - sg_cmds: add sg_get_mode_page_types() [get current, changeable, etc] |
| - llseek.c: add Makefile rule without "-std=c99", breaks on some archs |
| |
| Changelog for sg3_utils-1.12 [20050121] [svn: 50] |
| - sg_wr_mode: new utility to modify (i.e. write to) mode pages |
| - sg_reassign: new utility: issues Reassign Blocks command |
| - sg_rtpg: new utility: issues Report Target Port Groups command |
| [Christophe Varoqui] |
| - ATA IDENTIFY command misspelt as "IDENTITY" in several places |
| - sginfo: tweak SAS mode pages to match sas 1.1 rev 07 |
| - add NV_DIS bit to disk caching mode page |
| - sg_map: open /dev/nst* rather than /dev/st* (to stop spurious rewinds) |
| - sg_lib: ATA return sense descriptor |
| - add sg_get_sense_info_fld() to fetch info field from sense data |
| - fix bug in sg_scsi_sense_desc_find() |
| - add sense key specific decoding for fixed format sense data |
| - sg_modes: extend '-p' option to allow '-p=<page_code>,<subpage_code>' |
| - add '-A' option to output all mode pages and subpages |
| - extend '-l' option to show subpages, selected command set pages |
| - sg_inq: fix LUN WWN output in unit path report VPD page (emc) |
| [Hergen Lange] |
| - sg_get_config: some additions for DVD-R dual layer |
| - sg_modes: show write protect (WP) and DpoFua flags for disks |
| - sg_cmds: add llbaa argument to sg_ll_mode_sense10() |
| |
| Changelog for sg3_utils-1.11 [20041126] [svn: 48] |
| - sg_sync: new utility: invokes the synchronize cache command |
| - sg_prevent: new utility: invokes the prevent allow medium removal command |
| - sg_get_config: new utility: get configuration command for dvds and cds |
| - sg_request: fix, allocation length wasn't set |
| - sg_start: remove '-s', as start_stop_unit implicitly syncs caches |
| - sg_ses: add SAS expander element type |
| - sg_inq: add sanity check to unit serial number (VPD page 0x80) |
| - output ANSI version string (e.g. "SPC-2", previously was number) |
| - add '-s' option to decode SCSI Ports VPD page |
| - sg_logs: decoding of format status and non-volatile cache log |
| pages (0x8 and 0x17 in sbc-2) |
| - sg_dd: handle compile error when O_DIRECT not defined |
| - sginfo: tighten sanity checks around Unit serial number VPD page |
| |
| Changelog for sg3_utils-1.10 [20041030] [svn: 46] |
| - sg_readcap, sg_dd, sgm_dd, sgp_dd: fix sg_ll_readcap_10+16 (sg_cmds.c) |
| - sg_luns: new utility to report luns |
| - sg_logs: with '-t' (show temperature) ignore extra parameters in |
| temperature log page (still show them with '-p=d') |
| - sg_ses: clean argument sanity checks |
| - sg_cmds: add more common command wrappers |
| |
| Changelog for sg3_utils-1.09 [20041022] [svn: 44] |
| - sg_ses: new utility to get status and set control on SES devices |
| - sg_verify: new utility to verify block devices |
| - sg_emc_trespass: new utility for EMC specific trespass mode page |
| - sg_request: new utility that sends a REQUEST SENSE command |
| - sg_logs: '-r' to reset to manufacturer's defaults |
| - decode last n error events and last n deferred errors pages |
| - add names of ADC log pages |
| - sg_inq: update to SPC-3 rev 21 |
| - decode Extended INQUIRY data VPD page [0x86] {'-x'} |
| - decode Unit Path Report VPD page [0xc0] (EMC) {'-P'} |
| - sginfo: decode SAS protocol specific lu mode page |
| - sg_err: convert to sg_lib + update to SPC-3 rev 21 |
| - change GPL to FreeBSD license |
| - flag vendor specific asc/ascq ranges |
| - libsgutils: library made from sg_lib.c and sg_cmds.c |
| - rpm "spec" file additionally builds a "-devel" rpm with |
| static libsgutils.a and sg_lib.h and sg_cmds.h |
| - utils/hxascdmp.c: add FreeBSD license |
| - sg_persist: additions to man page |
| - add sg_persist_tst.sh example script to examples directory |
| - sg_turs: add '-v' and '-V' options |
| - sg_senddiag: add '-v' option |
| |
| Changelog for sg3_utils-1.08 [20040831] [svn: 42] |
| - sg_inq: fix noisy message when EVPD and raw modes set |
| - for VPD page 0, list supported page names if known {'-e'} |
| - add '-d' option to list version descriptors |
| - sg_opcodes: numerically sort list of opcodes unless '-u' given |
| - add '-a' to sort alphabetically list of opcode names |
| - add '-t' to report supported task management functions |
| - sg_persist: add 'register and move" PROUT service action |
| - add transportId support, document in sg_persist.8 and example |
| - sg_modes: handle subpage code for known pages (e.g. control extension) |
| - clean up sense buffer handling (allow for descriptor format) |
| - SPC-3 draft revision 20a updates |
| - sg_write_long: new utility to exercise WRITE LONG command |
| - sg_read_long: new utility to exercise READ LONG command |
| - sg_err.c: fix compile errors when SG_KERNEL_INCLUDES defined in lk 2.6 |
| - sg_includes.h typedef of u64 for BLKGETSIZE64 ioctl in lk 2.4 |
| - add safe_strerror(), sg_scsi_normalize_sense(), sg_normalize_sense() |
| and sg_scsi_sense_desc_find() functions |
| - add more sense data descriptor format decoding |
| - move multiple implementations of dStrHex() into sg_err.c |
| - sg_logs: exit if SCSI INQUIRY fails (e.g. when applied to ATA disk) |
| - sginfo: bug fixes and SPC-3 revision 20a updates |
| - add '-E' option to access Control Extension mode (sub)page |
| - sg_start: change '-d' switch to '-v' (verbose) switch for consistency |
| - document extra power condition states in man page |
| - sg_readcap: output rto_en and prot_en bits from long read capacity data |
| - add COVERAGE file to list SCSI command coverage |
| |
| Changelog for sg3_utils-1.07 [20040708] [svn: 40] |
| - sginfo: clean up inquiry vendor,product,revision strings |
| - '-Fhead': sort defect list by head |
| Tom Steudten <steudten at mx dot ch> |
| - rework sg_err for better command name coverage: service actions, |
| variable length and peripheral device type |
| - update asc,ascq codes to SPC-3 revision 19 |
| - move scsi_devfs_scan to archive directory |
| - add sg_opcodes utility to list supported operation codes |
| - add sg_persist utility to support persistent reservations |
| - add '-i' option to sg_inq to decode device identification VPD page (0x83) |
| - sg_inq tries an ATA IDENTIFY if SCSI INQUIRY fails |
| - sg_dd, sgm_dd and sgp_dd calculate block device sizes (if count not given) |
| - drop SG_GET_VERSION_NUM ioctl guard in most utilities |
| |
| Changelog for sg3_utils-1.06 [20040426] [svn: 37] |
| - sg_logs: some HBAs don't like odd transfer lengths so increment |
| - do INQUIRY and output product strings |
| - add ASCII rendering of the Protocol specific SAS page |
| - add '-v' verbose option to output cdb |
| - sg_scan: optionally take device file names (e.g. /dev/hdc and /dev/sda) |
| - only request 36 byte INQUIRY responses |
| - sg_err: add sg_decode_sense() function |
| - sg_inq: update output (ref: SPC-3 t10/1416-d rev 17, 28 January 2004) |
| - remove '-p' option to print out PCI address of host |
| - add '-v' verbose option to output cdb |
| - sginfo: allow '-u' to take hex arguments (prefixed by '0x'), |
| when subpage value is 255 show multiple subpages |
| - accept /dev/hd? ATAPI devices directly in lk 2.6 |
| - add '-t <pn>[,<spn>]' argument; like '-u' but decodes page |
| if it recognizes it |
| - drop '-L' argument |
| - add cd/dvd, tape, SES, more disk and more SPC-3 decoded mode pages |
| - add transport protocol decoded mode pages for SPI-4, FCP and SAS |
| - sg_modes: print all subpages when '-subp=ff' is selected |
| - do INQUIRY and output product strings |
| - add '-v' verbose option to output cdb |
| - Makefile: add -W compile flag and fix exposed warnings |
| - .spec file: change to build on Mandrake without errors |
| |
| Changelog for sg3_utils-1.05 [20031112] [svn: 35] |
| - sginfo: major rework; add IE page, clean up control, cache + |
| disconnect pages (as per SPC-3 and SBC-2). |
| - when storing, update saved page (change from previous version) |
| - use 10 byte mode sense and select by default (override with '-6') |
| - mode subpage support |
| - sg_dd, sgm_dd + sgp_dd: |
| - 64 bit capable (read capacity; count, skip and seek values). |
| - numerical arguments accept hex (prefixed by '0x' or '0X') |
| - require bpt > 0 |
| - fix problem when reading /dev/null |
| - sg_dd: Treat SIGUSR1 properly: print stats and continue; |
| - sgp_dd: reduce READ CAPACITY response size to 8 bytes |
| - sg_read: require bpt > 0 |
| - sg_test_rwbuf: switch from sg_header to sg_io_hdr interface |
| N.B. After these changes no sg3_utils utilities (in the main directory) |
| use the sg_header interface |
| - sg_scan: switch from sg_header to sg_io_hdr interface |
| - sg_senddiag: increase extended foreground timeout to 60 minutes |
| - sg_inq: add names of peripheral device types |
| - sg_readcap: show total size in bytes, MB, GB |
| - sg_logs: read log pages twice (first time to get response length), for |
| fragile HBAs; decode Seagate 0x37 + 0x3e pages; display pcbs |
| - sg_modes: fix core dump when corrupted response, don't print extra pages |
| - sg_map: increase sg device scanning from 128 to 256 |
| - change man page references from lk 2.5 to lk 2.6 |
| - examples/sg_iovec_tst: added testing sg_iovec (sg_io_hdr iovec's) |
| [retrospective addition to this log: "#define __user" added into |
| sg_include.h so user space programs aren't broken if they choose |
| to include kernel header.] |
| - utils/hxascdmp: add utility for displaying ASCII hex |
| |
| Changelog for sg3_utils-1.04 [20030513] [svn: 33] |
| - all remaining utilities in the main directory have man pages [thanks |
| to Eric Schwartz <emschwar at debian dot org> for 7 man pages] |
| - add CREDITS file |
| - sg_simple1, sg_simple2, sg_simple3, sg_simple4, sg_simple16 and |
| scsi_inquiry: moved to the examples directory |
| - sg_debug: moved to the archive directory |
| - sg_modes: add '-subp=<n>' for sub page code, suggests 6/10 byte |
| alternative if bad opcode sense received, flip -cpf flag to -pf, |
| add page names for most peripheral types |
| - sg_turs: default '-n=' argument to 1, only when '-n=1' print error |
| message in full |
| - sg_logs: print temperature "<not available>" for 255, '-t' switch |
| for temperature (from either temperature or IE log page) |
| - sg_dd: add '-odir=0|1' switch for O_DIRECT on block devices |
| - sg_start: add '-imm', '-loej' and 'pc=<n>' switches plus man page |
| - sg_readcap: add '-pmi' and 'lba=<n>' switches |
| - open files O_NONBLOCK in sg_inq, sg_modes and sg_logs so they |
| can be used on cd/dvd drivers when there is no disk present |
| |
| Changelog for sg3_utils-1.03 [20030402] [svn: 30] |
| - sg_senddiag: added, allows self tests and listing of diag pages |
| - sg_start: changed to use SG_IO so works on block devices |
| - sg_err: print out some "sense key specific" data [Trent Piepho] |
| - sg_modes: add "-6" switch for force 6 byte MODE SENSE [Trent Piepho] |
| - sg_modes: more information on page codes and controls |
| - sg_inq, sg_modes, sg_logs, sg_senddiag: add man pages |
| - sg_dd: add "append=0|1" switch for glueing together large files |
| - note in README about utilities offered by scsirastools package |
| |
| Changelog for sg3_utils-1.02 [20030101] [svn: 28] |
| - sg_inq: check if cmddt or evpd bits ignored |
| - sg_inq: warn -o=<n> not used for standard INQUIRY |
| - sg_turs: add -t option to time Test Unit Ready commands |
| - sg_errs: (used by most utilities) warn if sense buffer empty |
| - sg_modes: make safe with block SG_IO (bypass SG_GET_SCSI_ID ioctl) |
| - sg_logs: make safe with block SG_IO, self-test page work |
| - sg_dd: add "blksg_io=" switch to experiment with block SG_IO |
| - sg_read: now use SG_IO ioctl rather than sg write/read |
| - sginfo: fix writing parameters, check for block devices that answer |
| sg's ioctls, recognize "scd<n>" device names |
| - sg_map: stop close error report on tape devices |
| - sg_readcap: make safe with block SG_IO |
| - sg_start: make safe with block SG_IO |
| - sg_test_rwbuf: make safe with block SG_IO |
| |
| Changelog for sg3_utils-1.01 [20020814] [svn: 27] |
| ---------------------------- |
| - add raw switch ("-r") to sg_inq [Martin Schwenke] |
| |
| Changelog for sg3_utils-1.00 [20020728] [svn: 26] |
| ---------------------------- |
| - update sg_err [to SPC-3 T10/1416-D Rev 07 3 May 2002] |
| - "sg_inq -cl" now outputs opcode names |
| - add "continue on error" option to sg_dd |
| - add _LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64 defines to Makefile |
| - drop 'gen' argument from sg_dd and friends, allow any file types |
| except scsi tape device file names |
| - treat of=/dev/null as special (skip write). Accept of=. as alias |
| for of=/dev/null |
| - decode various log pages in sg_logs |
| - add 'dio' argument to sgm_dd for testing "zero copy" copies |
| |
| Changelog for sg3_utils-0.99 [20020317] |
| ---------------------------- |
| - add 'fua' and 'sync' arguments to sg_dd, sgp_dd and sgm_dd |
| - improve sg_inq, add "-cl" and "-36" arguments |
| - add sg_modes + sg_logs for MODE SENSE and LOG SENSE queries |
| - add rescan-scsi-bus.sh [Kurt Garloff] to archive directory |
| |
| Changelog for sg3_utils-0.98 [20020216] |
| ---------------------------- |
| - move sg_reset back from archive to main directory + build |
| - sprintf() to snprintf() changes |
| - add "time=<n>" argument to sg_dd, sgp_dd and sgm_dd to time transfer |
| - add man pages for sgm_dd and sg_read, update sg_dd and sgp_dd man pages |
| - add "cdbsz=" argument to sg_dd, sgp_dd, sgm_dd + sg_read |
| - add "gen=0|1" argument to sg_dd |
| |
| Changelog for sg3_utils-0.97 [20011223] |
| ---------------------------- |
| - move isosize to archive since introduced into util-linux-2.10s |
| |
| Changelog for sg3_utils-0.96 [20011221] |
| ---------------------------- |
| - add '-p' switch to sg_inq to provide PCI slot_name |
| - add '-n' switch to scsi_inquiry for non-blocking open |
| - new sgm_dd (dd variant) using mmap-ed IO |
| - sg_rbuf now has a '-m' argument to select mmap-ed IO |
| - sg_rbuf now has a '-t' switch to do timing + throughput calculation |
| - add sg_simple4 to demonstrate mmap-ed IO on an INQUIRY response |
| - add sg_simple16 to do a READ_16 (16 byte SCSI READ command) |
| - mmap-ed IO requires sg version 3.1.22 or later |
| - add sg_read to read multiple times starting at same offset |
| |
| Changelog for sg3_utils-0.95 [20010915] |
| ---------------------------- |
| - make sg_dd, sgp_dd and archive/sgq_dd warn if dio selected but |
| /sys/module/sg/parameters/allow_dio is '0' |
| - sg_map can now do any INQUIRY (when '-i' argument given) |
| - expand example in scsi_inquiry |
| |
| Changelog for sg3_utils-0.94 [20010419] |
| ---------------------------- |
| - add sg_start, documented in README.sg_start [Kurt Garloff] |
| - add osst support in sg_map [Kurt Garloff] |
| - improvements to sginfo [Kurt Garloff] |
| |
| Changelog for sg3_utils-0.93 [20010415] |
| ---------------------------- |
| - more include file fine tuning |
| - some "dio" work sg_rbuf |
| - extend sgp_dd so "continue on error" works on normal files |
| - introduce sg_include.h to encapsulate sg include problems |
| - add scsi_devfs_scan |
| - add sg_bus_xfer to archive directory |
| - more error info in sginfo |
| |
| Changelog for sg3_utils-0.92 [20010116] |
| ---------------------------- |
| - change sg_err.c output from stdout to stderr |
| - change sg_debug to call system("cat /proc/scsi/sg/debug"); |
| - fix in+out totals in sg_dd and sgp_dd when partial transfers |
| - lower include dependencies in sg_err.h |
| - add sgq_dd + Makefile to archive directory |
| |
| Changelog for sg3_utils-0.91 [20001221] |
| ---------------------------- |
| - signalling handling added to sg_dd (and documented in sg_dd.8) |
| - add man page for sg_rbuf (and a small change to its code) |
| - add "-d" switch to isosize and cope with > 2 GB (and man page) |
| |
| Changelog for sg3_utils-0.90 |
| ---------------------------- |
| - switch from dated versioning. Previous version was sg3_utils001012. |
| Arbitrarily start at package version 0.90 . Start Changelog. |
| - incorporate Kurt Garloff's patches from Suse scsi.spm source rpm |
| compilation: |
| - add Kurt Garloff's sg_test_rwbuf utility to read and write to disk |
| buffer |
| - clean up Makefile to include a "make install" (and also add a |
| "make uninstall"). |
| - add "-uno" switch to sginfo |
| - make raw and sg devices equally acceptable to sg_dd and sgp_dd. |
| [Raw devices still not as fast as sg devices doing disk to disk |
| copies in sgp_dd but this may be improved soon. Still faster than |
| using dd!] |
| - change lseek() in sg_dd and sgp_dd to _llseek() [using code borrowed |
| from fdisk] so big disks can be properly offset with 'skip' and |
| 'seek' arguments. [This change is significant for raw devices and |
| normal files since sg devices already use 31 bit block addressing.] |
| - rename sg_s3_inq to sg_inq. This utility allows the INQUIRY response |
| to be decoded as per SCSI 3 and 4. Also can probe VPD and CmdDt pages. |
| - change multiplier suffixes on sg_dd, sgp_dd and sg_turs so lower case |
| "k, m, g" are powers of 2 while "K, M, G" are powers of 10. This idea |
| borrowed from lmdd (lmbench suite) |
| - retire a few more less used utilities into the archive directory. |
| - add man pages for sg_dd, sgp_dd and sg_map |
