| # 64 byte NVMe Device Self Test command (an Admin command) that is suitable |
| # for: |
| # sg_raw --cmdfile=<this_file_name> <nvme_device> |
| # |
| # There is no data-in or data-out associated with this command. This command |
| # is optional so check the Identify controller command response to see if |
| # it is supported. |
| # |
| # The following invocation will self test the controller and all its |
| # namespaces (since nsid=0xffffffff) and does a "short" self test on each |
| # one (since CDW10 is 0x1). |
| |
| 14 00 00 00 ff ff ff ff 00 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| |
| # A typical invocation in Linux and FreeBSD would look like this: |
| # sg_raw --cmdfile=nvme_dev_self_test.hex /dev/nvme0 |
| # |
