| # This is the output (in hex) of a simulated SCSI ZONE QUERY command. |
| # |
| # The hex bytes in this file may be generated by: |
| # sg_z_act_query /dev/sg1 -HHH > /tmp/z_act_query.hex |
| # where /dev/sg1 was a SCSI device implementing ZBC-2. |
| |
| # An example invocation: |
| # sg_z_act_query --inhex=z_act_query.hex |
| |
| |
| # parameter data header (64 bytes) |
| 00 00 00 80 00 00 00 80 80 00 03 00 00 00 00 00 |
| 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| |
| # first zone activation descriptor, zone type: conventional |
| 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 04 |
| 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 |
| # second zone activation descriptor, zone type: sequential write required |
| 02 10 02 00 00 00 00 00 00 00 00 00 00 00 00 05 |
| 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |
| # third zone descriptor, zone type: sequential write required |
| 02 10 03 00 00 00 00 00 00 00 00 00 00 00 00 06 |
| 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 |
| # fourth and last zone activation descriptor, zone type: sequential write required |
| 02 10 04 00 00 00 00 00 00 00 00 00 00 00 00 07 |
| 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 |
