| ------------------------------------------------------------------- |
| Thu Jan 23 15:00:00 EST 2014 - dgilbert@interlog.com |
| |
| - import Suse build files into sg3_utils in the suse directory |
| * change suse spec file to be patch-less |
| * henceforth see ChangeLog in main directory |
| |
| ------------------------------------------------------------------- |
| Thu Jan 23 08:57:56 CET 2014 - hare@suse.de |
| |
| - Update to inofficial release 1.38r546 |
| * sg_ses: error and warning message cleanup |
| - fix --data=- problem with large buffers |
| - new --data=@FN to read hex data from file FN |
| - add --maxlen= option |
| * sg_inq: |
| - add LU_CONG to standard inquiry response |
| - sync version descriptors dated 20131126 |
| - fix overflow in encode_whitespaces |
| * sg_vpd: add LU_CONG to standard inquiry response output |
| - decode Third Party Copy (tpc) page |
| * sg_persist: add PROUT: Replace Lost Reservation (spc4r36) |
| * sg_readcap: for --16 show physical block size if |
| * sg_xcopy: |
| - environment variables: XCOPY_TO_SRC and |
| XCOPY_TO_DST indicate where xcopy command is sent |
| - change default to send xcopy to dst (was src) |
| - improve CL handling of short options (e.g. '-vv') |
| * sg_write_same: repeat if unit attention |
| * sg_rtpg: fix indexing bug with --extended option |
| * sg_lib_data: sync asc/ascq codes with T10 dated 20131110 |
| * sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out() |
| - Update tarball to 1.38b7r537 |
| - Add sg3_utils-1.38r546.patch |
| |
| ------------------------------------------------------------------- |
| Mon Nov 4 01:59:38 UTC 2013 - jengelh@inai.de |
| |
| - Update to new upstream release 1.37 |
| * sg_compare_and_write: add --quiet option to suppress miscompare |
| report |
| * sg_persist: fix core dump on -Q option |
| * sg_unmap: fix core dump on -g option |
| * sg_ses: add --nickname and --nickid options |
| - Remove sg3_utils-Fixup-T10-Vendor-designator-display.patch |
| (merged upstream) |
| |
| ------------------------------------------------------------------- |
| Sun Aug 25 18:45:14 CEST 2013 - ohering@suse.de |
| |
| - Fixup T10 Vendor designator display (bnc#805059) |
| sg3_utils-Fixup-T10-Vendor-designator-display.patch |
| - In rescan-scsi-bus.sh, check if the HBA driver exports issue_lip |
| in sysfs before using it (bnc#780946) |
| sg3_utils-check-if-hba-supports-issue-lip.patch |
| |
| ------------------------------------------------------------------- |
| Thu Jun 13 14:15:26 UTC 2013 - jengelh@inai.de |
| |
| - Implement shlib packaging guidelines; rename sg3_utils-devel |
| to libsgutils-devel (upstream recommendation) |
| - More robust make install call; remove redundant %clean section; |
| simplify file lists |
| |
| ------------------------------------------------------------------- |
| Tue Jun 11 08:56:39 UTC 2013 - rmilasan@suse.com |
| |
| - Update to version 1.36 |
| - sg_vpd: Protocol-specific port information VPD page |
| for SAS SSP, persistent connection (spl3r2), power |
| disable (spl3r3) |
| - block device characteristics: add FUAB bit |
| - sg_xcopy: handle more descriptor types; handle zero |
| maximum segment length; allow list IDs to be disabled; |
| improve skip/seek handling; allow xcopy on destination |
| - sg_reset: and --no-esc option to stop reset escalation |
| - clean up cli, add long option names |
| - sg_luns: add --test=ALUN option for decoding LUNs |
| - decoded luns output in decimal or hex (if -HH given) |
| - add '--linux' option to show Linux LUN after T10 |
| representation, can map one to the other |
| - sg_inq: add --vendor option to show standard inquiry's |
| vendor specific fields in ASCII |
| - take resid into account with response output |
| - sg_sync: add --16 (for 16 byte command) and --timeout= |
| - sg_logs: add data compression page (ssc4) |
| - sg_sat_set_features: increase --lba from 1 to 4 bytes |
| - sg_write_same: add --ndob option (sbc3r35d) |
| - sg_map: mark as deprecated |
| - sginfo: mark as deprecated, especially -l (list) |
| - sg_lib: improve snprintf handling |
| - sg_lib_data: sync asc/ascq codes with T10 20130117 |
| - sg_cmds (lib): if noisy given, give more UA info |
| - make code more C++ friendly |
| |
| ------------------------------------------------------------------- |
| Tue Mar 12 09:13:45 CET 2013 - [email protected] |
| |
| - Update to version 1.35 |
| - sg_compare_and_write: new utility |
| - sg_inq+sg_vpd: block device characteristics VPD page: |
| add product_type, WABEREQ, WACEREQ and VBULS fields |
| - sg_inq: more --export option changes for udev |
| - sg_vpd: add more rdac vendor specific vpd pages |
| - sg_verify: add --ebytchk option for sbc3r34 changes |
| - sg_stpg: --offline option: fix 'Invalid state 0xe' |
| - sg_ses: Door Lock element changed to Door element and |
| abbreviation changed from 'dl' to 'do' (ses3r05) |
| - archive/rescan-scsi-bus.sh: upgrade to version 1.53hr |
| - move rescan-scsi-bus.sh to scripts directory |
| - sync to sbc3r34 |
| - sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field |
| - sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17 |
| - clean up man page summary lines |
| - sg_xcopy: new dd like utility for extended copy command |
| - sg_copy_results: new utility for receive copy results |
| - sg_verify: add 16 byte cdb, bytchk (data-out buffer) |
| and group number support |
| - sync to spc4r36 and sbc3r32 |
| - sg_inq: add --export so sg_inq can replace udev's scsi_id |
| - decode old EMC Symmetrix abuse of VPD page 0x83 |
| - sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83 |
| - sg_ses: increase max dpage response size to 64 KB |
| - allow ident,locate on enclosure controller |
| - more sanity for additional element status descriptor |
| - sg_sanitize: add --ause, --fail and --test= |
| - sg_luns: add long extended flat space addressing format |
| - sg_logs: add ATA pass-through results lpage (SAT-2) |
| - sg_rtpg: add --extended option |
| - sg_senddiag: list rebuild assist diag page name |
| - sg_pt_linux: expand DID_ (host_byte) codes |
| - cope with a transport error plus sense data |
| - prefer major() over MAJOR() macro |
| - sg_lib: fix sg_get_command_name() service actions |
| - report sdat_ovfl bit (if set) in sense data |
| - decode extended_copy and receive_copy service actions |
| - decode read_buffer and write_buffer modes |
| - decode ATA PT fixed format sense (SAT-2) |
| - sg_cmds_extra: add sg_ll_report_tgt_prt_grp2() |
| - ./configure options: |
| - change --enable-no-linux-bsg to --disable-linuxbsg |
| - add --disable-scsistrings to reduce utility sizes |
| |
| ------------------------------------------------------------------- |
| Wed Jul 4 07:01:46 UTC 2012 - cfarrell@suse.com |
| |
| - license update: GPL-2.0+ and BSD-3-Clause |
| Show aggregation and make compatible with Fedora declaration |
| |
| ------------------------------------------------------------------- |
| Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com |
| |
| - Update to version 1.33 |
| - sg_ses: major rework of indexes (again), now two level |
| - sg_write_buffer: new --specific option for mode specific |
| field; new mode 13 (spc4r32) |
| - sg_vpd: add hp3par volume info vendor VPD page |
| - fix 'scsi ports' [0x88] page problem |
| - add 'sinq' pseudo page for standard inquiry response |
| - add power consumption page |
| - sg_format: add --poll= option for request sense polling |
| - improve handling of disks > 2 TB and DIF (protection) |
| - sg_logs: LB provision lpage extra (sbc3r28) |
| - sg_modes: application tag mpage subcode 0xf0->0x2 |
| - sg_write_same: no prot fields when wrprotect=0 |
| - sg_get_lba_status: reflect change in sbc3r25 to Parameter |
| Data Length response field (offset reduced from 8 to 4) |
| - sg_inq, sg_vpd: sync with spc4r33 |
| - win32: change DataBufferOffset type per MSDN; caused |
| problem with 64 bit machines (with buffered interface) |
| - sg_luns: tweak documentation for vendor specific reports |
| - add man pages for scsi_loging_level, scsi_mandat, |
| scsi_satl and scsi_temperature |
| |
| ------------------------------------------------------------------- |
| Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com |
| |
| - Update to version 1.32 |
| + sg_sanitize: new utility for command added in sb3r27 |
| + sg_sat_identify: add '--ident' to output WWN |
| + sg_ses: major rework of descriptor output |
| + add --index, --descriptor, --join, --clear, --get, and --set |
| options |
| + sg_raw: exit status corrections |
| + sg_decode_sense: add --nospace and --hex options |
| + sg_logs: fix bug with large --maxlen |
| + zero response length when resid implies it is invalid |
| + add scope field to lb provisioning lpage (sb3r27) |
| + sg_inq: sync version descriptors with spc4r31 |
| + sb_lib_data: sync asc/ascq codes with spc4r31 |
| + sg_vpd: add LBPRZ field in LP provisioning VPD page |
| + sg_format: allow format of pdt 7 (some MO drives) |
| + sg_cmd_basic: sg_cmds_process_resp() handle status good |
| with a sense key other than no_sense (e.g. completed) |
| + add README.iscsi |
| |
| - Updated rescan-scsi-bus.sh to v1.56 |
| |
| ------------------------------------------------------------------- |
| Thu Mar 10 08:47:43 UTC 2011 - coolo@novell.com |
| |
| - fix file list |
| |
| ------------------------------------------------------------------- |
| Fri Feb 18 16:41:32 CET 2011 - hare@suse.de |
| |
| - Update to version 1.31: |
| + sg_decode_sense: new utility to decode sense data |
| + sg_vpd: LB provisioning + Block limits pages (sbc3r26) |
| + sync asc/ascq and version descriptors with spc4r28 |
| + sg_get_config, sg_rmsn, sg_verify: add --readonly option |
| + sg_lib: implement forwarded sense data descriptor |
| - decode user data segment referral sense data descriptor |
| + sg_lib, sg_turs, sg_format: more precision for progress |
| indication (two places after decimal point) |
| + sg_lib(win32): add runtime selection of SPT direct or |
| indirect interface |
| - sg_read_buffer+sg_write_buffer: set SPT direct |
| + add examples/forwarded_sense.txt + examples/ref_sense.txt |
| |
| - Changes from version 1.30: |
| + sg_referrals: new utility for REPORT REFERRALS |
| + sbc3r25 renames 'thin' provisioning' to 'logical block |
| provisioning': changes in sg_format, sg_inq, sg_logs, |
| sg_modes, sg_readcap, sg_vpd |
| + sg_inq: update version descriptor list to spc4r27 |
| - extended inquiry vpd page add extended self test |
| completion minutes field |
| + sg_lib: sync asc/ascq list to spc4r27 |
| - dStrHex(): trim excess trailing spaces |
| + sg_read_long: add --readonly option (open() is rw) |
| + sg_raw: add --readonly option (open() is rw) |
| - allow bidirectional commands |
| + sg_vpd: rdac vendor page [0xc8] parse corrections |
| - extended inquiry vpd page add extended self test |
| -completion minutes field |
| + sg_ses: expand --data (in) buffer to 2048 bytes |
| + sg_opcodes: add extended parameter data for TMFs (spc4r26) |
| + sg_dd: clean count calculation, document nocache flag |
| - treat bsg devices as implicit sg_io |
| + sg_write_same: if READ CAPACITY(16) fails try 10 byte variant |
| - anticipate approval of proposal to allow UNMAP and ANCHOR |
| bits to be set on WRITE SAME(10) with '--10' option |
| + sg3_utils man page: sections added for OS device names |
| |
| ------------------------------------------------------------------- |
| Fri Aug 13 11:42:50 CEST 2010 - [email protected] |
| |
| - Update to version 1.29: |
| + sg_rtpg: new logical block dependent state and bit (spc4r23) |
| + sg_start: add '--readonly' option for ATA disks |
| + sg_lib: update asc/ascq list to spc4r23 |
| + sg_inq: update version descriptor list to spc4r23 |
| + sg_vpd: block device characteristics page: fix form factor |
| - update Extended Inquiry VPD page to spc4r23 |
| - update Block Limits VPD page to sbc3r22 |
| - update Thin Provisioning VPD page to sbc3r22 |
| - Automation device serial number and Data transfer device |
| element VPD pages (ssc4r01) |
| - add Referrals VPD page (sbc3r22) |
| + sg_logs: add thin provisioning and solid state media log pages |
| - addition of IBM LTO specific log pages |
| + sg_modes: new page names from ssc4r01 |
| + sg_ses: sync with ses3r02 (SAS-2.1 connector types) |
| + sg_unmap: add '--anchor' option (sbc3r22) |
| + sg_write_same: add '--anchor' option (sbc3r22) |
| + sg_pt interface: add set_scsi_pt_flags() to permit passing |
| through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags |
| + add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL |
| + add AM_MAINTAINER_MODE to configure.ac to lessen build issues |
| + add BSD_LICENSE file to this and lib directories, refer to |
| it from source and header files. Some source has GPL license |
| - Changes from version 1.28: |
| + sg_unmap: new utility for thin provisioning |
| - add examples/sg_unmap_example.txt |
| + sg_get_lba_status: new utility for thin provisioning |
| + sg_read_block_limits: new utility for tape drives |
| + sg_logs: add cache memory statistics log (sub)page |
| + sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19) |
| + sg_vpd: add Thin provisioning VPD page (sbc3r20) and |
| TapeAlert supported flags VPD page |
| + sg_inq: note VPD page support better in sg_vpd |
| + sg_persist: add transport specific transportID format |
| - allow transportIDs to be read from named file |
| + sg_opcodes: allow --opcode= option to take OP and SA |
| values (comma seperated) |
| - tweak print format, remove test code |
| + sg_requests: remove test code in progress calculation |
| + sg_reset: add target reset option |
| + sg_luns: reduce default maxlen to 8192 (for FreeBSD) |
| + sg_raw: extend max cdb length from 16 to 256 bytes |
| - align heap allocs to page boundaries |
| + sg_lib: sg_set_binary_mode() needs config.h included |
| - add progress indication sense data descriptor (0xa) |
| - change SG3_UTILS_* constants to SG_LIB_* |
| - decode service actions within persistent reserve in/out |
| - sync with spc4r21 |
| + sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status() |
| + sg_pt_linux: fix check condition but empty sense buffer; |
| - major() macro grief, if present include <linux/kdev_t.h> and |
| use MAJOR() instead |
| + scripts/sas_disk_blink: moved from this package to sdparm |
| + utils/hxascdmp: in Windows set binary mode on read files |
| + examples/sg_persist_tst.sh: add PRIN read full status command |
| + sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows |
| set binary mode on read files |
| + sg_pt_win32: default to non-direct variant of SPT interface |
| - use './configure --enable-win32-spt-direct' to override |
| - non-direct data length set to 16 KB, extended if required |
| + debian: incorporate patch from debian sid |
| |
| ------------------------------------------------------------------- |
| Mon Jun 28 06:38:35 UTC 2010 - [email protected] |
| |
| - use %_smp_mflags |
| |
| ------------------------------------------------------------------- |
| Tue Jul 21 14:00:16 CEST 2009 - [email protected] |
| |
| - Clean up spec file and remove obsolete cruft |
| |
| ------------------------------------------------------------------- |
| Fri Apr 17 20:15:58 CEST 2009 - [email protected] |
| |
| - remove static libraries and "la" files |
| |
| ------------------------------------------------------------------- |
| Mon Jan 26 15:30:31 CET 2009 - [email protected] |
| |
| - Fixes to rescan-scsi-bus.sh: |
| * Implement '--forcerescan' to force a rescan of existing devices |
| * Handle LUN changes correctly |
| * Check variables before evaluation |
| |
| ------------------------------------------------------------------- |
| Wed Oct 29 11:05:47 CET 2008 - [email protected] |
| |
| - rescan-scsi-bus.sh 1.29: |
| * Fix error in script (returning "" does not work) |
| * Support systems without /proc/scsi |
| - Don't install INSTALL |
| |
| ------------------------------------------------------------------- |
| Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de |
| |
| - Add %insserv_prereq (bnc#423204) |
| |
| ------------------------------------------------------------------- |
| Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de |
| |
| - Update rescan-scsi-bus.sh script to 1.28: |
| * Merge fixes from Hannes |
| * Minor cleanups |
| * Sort hosts numerically |
| |
| ------------------------------------------------------------------- |
| Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de |
| |
| - Update to sg3_utils-1.27: |
| * Adapted to linux-2.6.26 (sg_map26) |
| * sg_dd uses flock (rw -- if that fails ro) |
| * sg_get_config: OSSC feature (mmc6r02) |
| - Update to sg3_utils-1.26: |
| * Minor fixes and enhancements to |
| sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd, |
| sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd, |
| sg_opcodes, sg_turs. |
| * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions, |
| sense key specific unit attn queue overflow decoding, ... |
| * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t, |
| sg_io_linux -> lib/. |
| * Documentation enhancements. |
| |
| ------------------------------------------------------------------- |
| Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de |
| |
| - Use correct length parameter for sg_inq (bnc#363438) |
| |
| ------------------------------------------------------------------- |
| Fri May 23 10:22:31 CEST 2008 - hare@suse.de |
| |
| - Use 'Provides' to clean update dependency |
| |
| ------------------------------------------------------------------- |
| Fri May 9 17:31:33 CEST 2008 - schwab@suse.de |
| |
| - Use autoreconf -i. |
| |
| ------------------------------------------------------------------- |
| Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de |
| |
| - Split off from original scsi package. |
| |
