| Command coverage |
| ================ |
| The following table lists SCSI commands in alphabetical order on the |
| left and the sg3_utils utilities that implement invocations of them |
| on the right. The second table lists supported ATA commands. |
| |
| SCSI command sg3_utils ** utilities that use this SCSI command |
| ------------ ------------------------------------------------- |
| GET CONFIGURATION sg_get_config |
| INQUIRY sdparm, sg_dd, sg_format, sg_inq, sginfo, sg_logs, |
| sg_map('-i'), sg_modes, sg_opcodes, sg_persist, |
| sg_scan, sg_ses |
| FORMAT UNIT sg_format |
| LOG SELECT sg_logs('-r') |
| LOG SENSE sg_logs |
| MODE SELECT(6) sdparm, sg_wr_mode, sginfo, sg_format, sg_emc_trespass |
| MODE SELECT(10) sdparm, sg_wr_mode, sginfo, sg_format, sg_emc_trespass |
| MODE SENSE(6) sdparm, sg_modes, sg_wr_mode, sginfo, sg_format, sg_dd, |
| sg_senddiag('-e') |
| MODE SENSE(10) sdparm, sg_modes, sg_wr_mode, sginfo, sg_format, sg_dd, |
| sg_senddiag('-e') |
| PERSISTENT IN sg_persist |
| PERSISTENT OUT sg_persist |
| PREVENT ALLOW MEDIUM REMOVAL sg_prevent |
| READ(6) sg_dd, sgm_dd, sgp_dd, sg_read |
| READ(10) sg_dd, sgm_dd, sgp_dd, sg_read |
| READ(12) sg_dd, sgm_dd, sgp_dd, sg_read |
| READ(16) sg_dd, sgm_dd, sgp_dd, sg_read |
| READ BUFFER sg_rbuf, sg_test_rwbuf |
| READ CAPACITY(10) sg_readcap, sg_dd, sgm_dd, sgp_dd, sg_format |
| READ CAPACITY(16) sg_readcap, sg_dd, sgm_dd, sgp_dd, sg_format |
| READ DEFECT(10) sginfo, sg_reassign |
| READ DEFECT(12) sginfo |
| READ LONG sg_read_long, sg_dd |
| READ MEDIA SERIAL NUMBER sg_rmsn |
| REASSIGN BLOCKS sg_reassign |
| RECEIVE DIAGNOSTIC sg_senddiag, sg_ses |
| REPORT LUNS sg_luns |
| REPORT SUPPORTED OPERATION CODES sg_opcodes |
| REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS sg_opcodes |
| REPORT TARGET PORT GROUPS sg_rtpg |
| REQUEST SENSE sg_requests |
| SEND DIAGNOSTIC sg_senddiag, sg_ses |
| START STOP sg_start |
| SYNCHRONIZE CACHE sg_sync, sg_dd, sgm_dd, sgp_dd |
| TEST UNIT READY sg_turs, sg_format |
| VERIFY(10) sg_verify |
| WRITE(6) sg_dd, sgm_dd, sgp_dd |
| WRITE(10) sg_dd, sgm_dd, sgp_dd |
| WRITE(12) sg_dd, sgm_dd, sgp_dd |
| WRITE(16) sg_dd, sgm_dd, sgp_dd |
| WRITE BUFFER sg_test_rwbuf |
| WRITE LONG sg_write_long |
| |
| |
| ATA command sg3_utils utilities that use this SCSI command |
| ----------- ---------------------------------------------- |
| IDENTIFY sg_inq, sg_scan |
| |
| |
| ** sdparm is now in its own package called sdparm (rather than sg3_utils) |
| |
| Doug Gilbert |
| 18th April 2005 |
