| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Board init file for Dragonboard 410C | |
| * | |
| * (C) Copyright 2015 Mateusz Kulikowski <[email protected]> | |
| */ | |
| #include <common.h> | |
| #include <dm.h> | |
| #include <usb.h> | |
| #include <asm/gpio.h> | |
| #include <fdt_support.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* pointer to the device tree ammended by the firmware */ | |
| extern void *fw_dtb; | |
| void *board_fdt_blob_setup(void) | |
| { | |
| if (fdt_magic(fw_dtb) != FDT_MAGIC) { | |
| printf("Firmware provided invalid dtb!\n"); | |
| return NULL; | |
| } | |
| return fw_dtb; | |
| } | |
| int dram_init(void) | |
| { | |
| gd->ram_size = PHYS_SDRAM_1_SIZE; | |
| return 0; | |
| } | |
| int dram_init_banksize(void) | |
| { | |
| gd->bd->bi_dram[0].start = PHYS_SDRAM_1; | |
| gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; | |
| return 0; | |
| } | |
| int board_prepare_usb(enum usb_init_type type) | |
| { | |
| static struct udevice *pmic_gpio; | |
| static struct gpio_desc hub_reset, usb_sel; | |
| int ret = 0, node; | |
| if (!pmic_gpio) { | |
| ret = uclass_get_device_by_name(UCLASS_GPIO, | |
| "pm8916_gpios@c000", | |
| &pmic_gpio); | |
| if (ret < 0) { | |
| printf("Failed to find pm8916_gpios@c000 node.\n"); | |
| return ret; | |
| } | |
| } | |
| /* Try to request gpios needed to start usb host on dragonboard */ | |
| if (!dm_gpio_is_valid(&hub_reset)) { | |
| node = fdt_subnode_offset(gd->fdt_blob, | |
| dev_of_offset(pmic_gpio), | |
| "usb_hub_reset_pm"); | |
| if (node < 0) { | |
| printf("Failed to find usb_hub_reset_pm dt node.\n"); | |
| return node; | |
| } | |
| ret = gpio_request_by_name_nodev(offset_to_ofnode(node), | |
| "gpios", 0, &hub_reset, 0); | |
| if (ret < 0) { | |
| printf("Failed to request usb_hub_reset_pm gpio.\n"); | |
| return ret; | |
| } | |
| } | |
| if (!dm_gpio_is_valid(&usb_sel)) { | |
| node = fdt_subnode_offset(gd->fdt_blob, | |
| dev_of_offset(pmic_gpio), | |
| "usb_sw_sel_pm"); | |
| if (node < 0) { | |
| printf("Failed to find usb_sw_sel_pm dt node.\n"); | |
| return 0; | |
| } | |
| ret = gpio_request_by_name_nodev(offset_to_ofnode(node), | |
| "gpios", 0, &usb_sel, 0); | |
| if (ret < 0) { | |
| printf("Failed to request usb_sw_sel_pm gpio.\n"); | |
| return ret; | |
| } | |
| } | |
| if (type == USB_INIT_HOST) { | |
| /* Start USB Hub */ | |
| dm_gpio_set_dir_flags(&hub_reset, | |
| GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); | |
| mdelay(100); | |
| /* Switch usb to host connectors */ | |
| dm_gpio_set_dir_flags(&usb_sel, | |
| GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); | |
| mdelay(100); | |
| } else { /* Device */ | |
| /* Disable hub */ | |
| dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT); | |
| /* Switch back to device connector */ | |
| dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT); | |
| } | |
| return 0; | |
| } | |
| /* Check for vol- button - if pressed - stop autoboot */ | |
| int misc_init_r(void) | |
| { | |
| struct udevice *pon; | |
| struct gpio_desc resin; | |
| int node, ret; | |
| ret = uclass_get_device_by_name(UCLASS_GPIO, "pm8916_pon@800", &pon); | |
| if (ret < 0) { | |
| printf("Failed to find PMIC pon node. Check device tree\n"); | |
| return 0; | |
| } | |
| node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pon), | |
| "key_vol_down"); | |
| if (node < 0) { | |
| printf("Failed to find key_vol_down node. Check device tree\n"); | |
| return 0; | |
| } | |
| if (gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0, | |
| &resin, 0)) { | |
| printf("Failed to request key_vol_down button.\n"); | |
| return 0; | |
| } | |
| if (dm_gpio_get_value(&resin)) { | |
| env_set("bootdelay", "-1"); | |
| printf("Power button pressed - dropping to console.\n"); | |
| } | |
| return 0; | |
| } | |
| int board_init(void) | |
| { | |
| return 0; | |
| } | |
| int ft_board_setup(void *blob, bd_t *bd) | |
| { | |
| int offset, len, i; | |
| const char *mac; | |
| struct { | |
| const char *compatible; | |
| const char *property; | |
| } fix[] = { | |
| [0] = { | |
| /* update the kernel's dtb with wlan mac */ | |
| .compatible = "qcom,wcnss-wlan", | |
| .property = "local-mac-address", | |
| }, | |
| [1] = { | |
| /* update the kernel's dtb with bt mac */ | |
| .compatible = "qcom,wcnss-bt", | |
| .property = "local-bd-address", | |
| }, | |
| }; | |
| for (i = 0; i < sizeof(fix) / sizeof(fix[0]); i++) { | |
| offset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, | |
| fix[i].compatible); | |
| if (offset < 0) | |
| continue; | |
| mac = fdt_getprop(gd->fdt_blob, offset, fix[i].property, &len); | |
| if (mac) | |
| do_fixup_by_compat(blob, fix[i].compatible, | |
| fix[i].property, mac, ARP_HLEN, 1); | |
| } | |
| return 0; | |
| } | |
| void reset_cpu(ulong addr) | |
| { | |
| psci_system_reset(); | |
| } |