| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * (C) Copyright 2014 | |
| * Texas Instruments Incorporated. | |
| * Felipe Balbi <[email protected]> | |
| * | |
| * Configuration settings for the TI Beagle x15 board. | |
| * See ti_omap5_common.h for omap5 common settings. | |
| */ | |
| #ifndef __CONFIG_AM57XX_EVM_H | |
| #define __CONFIG_AM57XX_EVM_H | |
| #include <environment/ti/dfu.h> | |
| #include <linux/sizes.h> | |
| #define CONFIG_IODELAY_RECALIBRATION | |
| #define CONFIG_NR_DRAM_BANKS 2 | |
| /* MMC ENV related defines */ | |
| #define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */ | |
| #define CONFIG_SYS_MMC_ENV_PART 0 | |
| #define CONFIG_ENV_SIZE SZ_128K | |
| #define CONFIG_ENV_OFFSET 0x260000 | |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) | |
| #define CONFIG_SYS_REDUNDAND_ENVIRONMENT | |
| #define CONSOLEDEV "ttyO2" | |
| #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ | |
| #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ | |
| #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ | |
| #define CONFIG_ENV_EEPROM_IS_ON_I2C | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 | |
| #define CONFIG_SYS_OMAP_ABE_SYSCK | |
| #define DFUARGS \ | |
| "dfu_bufsiz=0x10000\0" \ | |
| DFU_ALT_INFO_MMC \ | |
| DFU_ALT_INFO_EMMC \ | |
| DFU_ALT_INFO_RAM \ | |
| #include <configs/ti_omap5_common.h> | |
| /* Enhance our eMMC support / experience. */ | |
| #define CONFIG_HSMMC2_8BIT | |
| /* CPSW Ethernet */ | |
| #define CONFIG_BOOTP_DNS2 | |
| #define CONFIG_BOOTP_SEND_HOSTNAME | |
| #define CONFIG_NET_RETRY_COUNT 10 | |
| #define CONFIG_MII /* Required in net/eth.c */ | |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ | |
| #define CONFIG_SUPPORT_EMMC_BOOT | |
| /* USB xHCI HOST */ | |
| #define CONFIG_USB_XHCI_OMAP | |
| #define CONFIG_OMAP_USB3PHY1_HOST | |
| /* SATA */ | |
| #define CONFIG_SCSI_AHCI_PLAT | |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 | |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
| CONFIG_SYS_SCSI_MAX_LUN) | |
| /* | |
| * Default to using SPI for environment, etc. | |
| * 0x000000 - 0x040000 : QSPI.SPL (256KiB) | |
| * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) | |
| * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) | |
| * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) | |
| * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) | |
| * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) | |
| * 0x9E0000 - 0x2000000 : USERLAND | |
| */ | |
| #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 | |
| #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 | |
| #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 | |
| /* SPI SPL */ | |
| #define CONFIG_TI_EDMA3 | |
| #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 | |
| /* SPI */ | |
| #define CONFIG_TI_SPI_MMAP | |
| #define CONFIG_SF_DEFAULT_SPEED 76800000 | |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
| #define CONFIG_QSPI_QUAD_SUPPORT | |
| #endif /* __CONFIG_AM57XX_EVM_H */ |