| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * (C) Copyright 2009 | |
| * Marvell Semiconductor <www.marvell.com> | |
| * Prafulla Wadaskar <[email protected]> | |
| * | |
| * (C) Copyright 2009 | |
| * Stefan Roese, DENX Software Engineering, [email protected]. | |
| * | |
| * (C) Copyright 2011-2012 | |
| * Holger Brunck, Keymile GmbH Hannover, [email protected] | |
| * Valentin Longchamp, Keymile AG, [email protected] | |
| */ | |
| /* | |
| * for linking errors see | |
| * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html | |
| */ | |
| #ifndef _CONFIG_KM_KIRKWOOD_H | |
| #define _CONFIG_KM_KIRKWOOD_H | |
| /* KM_KIRKWOOD */ | |
| #if defined(CONFIG_KM_KIRKWOOD) | |
| #define CONFIG_HOSTNAME "km_kirkwood" | |
| #define CONFIG_KM_DISABLE_PCIE | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| /* KM_KIRKWOOD_PCI */ | |
| #elif defined(CONFIG_KM_KIRKWOOD_PCI) | |
| #define CONFIG_HOSTNAME "km_kirkwood_pci" | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| #define CONFIG_KM_FPGA_CONFIG | |
| #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" | |
| #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE | |
| /* KM_KIRKWOOD_128M16 */ | |
| #elif defined(CONFIG_KM_KIRKWOOD_128M16) | |
| #define CONFIG_HOSTNAME "km_kirkwood_128m16" | |
| #undef CONFIG_SYS_KWD_CONFIG | |
| #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg | |
| #define CONFIG_KM_DISABLE_PCIE | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| /* KM_NUSA / KM_SUGP1 */ | |
| #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| # if defined(CONFIG_KM_NUSA) | |
| #define CONFIG_HOSTNAME "kmnusa" | |
| # elif defined(CONFIG_KM_SUGP1) | |
| #define CONFIG_HOSTNAME "kmsugp1" | |
| #define KM_PCIE_RESET_MPP7 | |
| #endif | |
| #undef CONFIG_SYS_KWD_CONFIG | |
| #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg | |
| #define CONFIG_KM_ENV_IS_IN_SPI_NOR | |
| #define CONFIG_KM_FPGA_CONFIG | |
| #define CONFIG_KM_PIGGY4_88E6352 | |
| #define CONFIG_MV88E6352_SWITCH | |
| #define CONFIG_KM_MVEXTSW_ADDR 0x10 | |
| /* KM_MGCOGE3UN */ | |
| #elif defined(CONFIG_KM_MGCOGE3UN) | |
| #define CONFIG_HOSTNAME "mgcoge3un" | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| #undef CONFIG_SYS_KWD_CONFIG | |
| #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg | |
| #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" | |
| #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 | |
| #define CONFIG_KM_DISABLE_PCIE | |
| #define CONFIG_KM_PIGGY4_88E6061 | |
| /* KMCOGE5UN */ | |
| #elif defined(CONFIG_KM_COGE5UN) | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| #undef CONFIG_SYS_KWD_CONFIG | |
| #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg | |
| #define CONFIG_KM_ENV_IS_IN_SPI_NOR | |
| #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 | |
| #define CONFIG_HOSTNAME "kmcoge5un" | |
| #define CONFIG_KM_DISABLE_PCIE | |
| #define CONFIG_KM_PIGGY4_88E6352 | |
| /* KM_PORTL2 */ | |
| #elif defined(CONFIG_KM_PORTL2) | |
| #define CONFIG_HOSTNAME "portl2" | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| #define CONFIG_KM_PIGGY4_88E6061 | |
| /* KM_SUV31 */ | |
| #elif defined(CONFIG_KM_SUV31) | |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ | |
| #define CONFIG_HOSTNAME "kmsuv31" | |
| #undef CONFIG_SYS_KWD_CONFIG | |
| #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg | |
| #define CONFIG_KM_ENV_IS_IN_SPI_NOR | |
| #define CONFIG_KM_FPGA_CONFIG | |
| #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" | |
| #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE | |
| #else | |
| #error ("Board unsupported") | |
| #endif | |
| /* include common defines/options for all arm based Keymile boards */ | |
| #include "km/km_arm.h" | |
| #if defined(CONFIG_KM_PIGGY4_88E6352) | |
| /* | |
| * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via | |
| * an Marvell 88E6352 simple switch. | |
| * In this case we have to change the default settings for the etherent mac. | |
| * There is NO ethernet phy. The ARM and Switch are conencted directly over | |
| * RGMII in MAC-MAC mode | |
| * In this case 1GBit full duplex and autoneg off | |
| */ | |
| #define PORT_SERIAL_CONTROL_VALUE ( \ | |
| MVGBE_FORCE_LINK_PASS | \ | |
| MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ | |
| MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ | |
| MVGBE_ADV_NO_FLOW_CTRL | \ | |
| MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ | |
| MVGBE_FORCE_BP_MODE_NO_JAM | \ | |
| (1 << 9) /* Reserved bit has to be 1 */ | \ | |
| MVGBE_DO_NOT_FORCE_LINK_FAIL | \ | |
| MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ | |
| MVGBE_DTE_ADV_0 | \ | |
| MVGBE_MIIPHY_MAC_MODE | \ | |
| MVGBE_AUTO_NEG_NO_CHANGE | \ | |
| MVGBE_MAX_RX_PACKET_1552BYTE | \ | |
| MVGBE_CLR_EXT_LOOPBACK | \ | |
| MVGBE_SET_FULL_DUPLEX_MODE | \ | |
| MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ | |
| MVGBE_SET_GMII_SPEED_TO_1000 |\ | |
| MVGBE_SET_MII_SPEED_TO_100) | |
| #endif | |
| #ifdef CONFIG_KM_PIGGY4_88E6061 | |
| /* | |
| * Some keymile boards like mgcoge3un have their PIGGY4 connected via | |
| * an Marvell 88E6061 simple switch. | |
| * In this case we have to change the default settings for the | |
| * ethernet phy connected to the kirkwood. | |
| * In this case 100MB full duplex and autoneg off | |
| */ | |
| #define PORT_SERIAL_CONTROL_VALUE ( \ | |
| MVGBE_FORCE_LINK_PASS | \ | |
| MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ | |
| MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ | |
| MVGBE_ADV_NO_FLOW_CTRL | \ | |
| MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ | |
| MVGBE_FORCE_BP_MODE_NO_JAM | \ | |
| (1 << 9) /* Reserved bit has to be 1 */ | \ | |
| MVGBE_DO_NOT_FORCE_LINK_FAIL | \ | |
| MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ | |
| MVGBE_DTE_ADV_0 | \ | |
| MVGBE_MIIPHY_MAC_MODE | \ | |
| MVGBE_AUTO_NEG_NO_CHANGE | \ | |
| MVGBE_MAX_RX_PACKET_1552BYTE | \ | |
| MVGBE_CLR_EXT_LOOPBACK | \ | |
| MVGBE_SET_FULL_DUPLEX_MODE | \ | |
| MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ | |
| MVGBE_SET_GMII_SPEED_TO_10_100 |\ | |
| MVGBE_SET_MII_SPEED_TO_100) | |
| #endif | |
| #ifdef CONFIG_KM_DISABLE_PCI | |
| #undef CONFIG_KIRKWOOD_PCIE_INIT | |
| #endif | |
| #endif /* _CONFIG_KM_KIRKWOOD */ |