| /* | |
| * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il> | |
| * | |
| * Authors: Nikita Kiryanov <[email protected]> | |
| * Igor Grinberg <[email protected]> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <i2c.h> | |
| #ifndef CONFIG_SYS_I2C_EEPROM_ADDR | |
| # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
| # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| #endif | |
| #ifndef CONFIG_SYS_I2C_EEPROM_BUS | |
| #define CONFIG_SYS_I2C_EEPROM_BUS 0 | |
| #endif | |
| #define EEPROM_LAYOUT_VER_OFFSET 44 | |
| #define BOARD_SERIAL_OFFSET 20 | |
| #define BOARD_SERIAL_OFFSET_LEGACY 8 | |
| #define BOARD_REV_OFFSET 0 | |
| #define BOARD_REV_OFFSET_LEGACY 6 | |
| #define BOARD_REV_SIZE 2 | |
| #define MAC_ADDR_OFFSET 4 | |
| #define MAC_ADDR_OFFSET_LEGACY 0 | |
| #define LAYOUT_INVALID 0 | |
| #define LAYOUT_LEGACY 0xff | |
| static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */ | |
| static int cl_eeprom_read(uint offset, uchar *buf, int len) | |
| { | |
| int res; | |
| unsigned int current_i2c_bus = i2c_get_bus_num(); | |
| res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); | |
| if (res < 0) | |
| return res; | |
| res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset, | |
| CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len); | |
| i2c_set_bus_num(current_i2c_bus); | |
| return res; | |
| } | |
| static int cl_eeprom_setup_layout(void) | |
| { | |
| int res; | |
| if (cl_eeprom_layout != LAYOUT_INVALID) | |
| return 0; | |
| res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET, | |
| (uchar *)&cl_eeprom_layout, 1); | |
| if (res) { | |
| cl_eeprom_layout = LAYOUT_INVALID; | |
| return res; | |
| } | |
| if (cl_eeprom_layout == 0 || cl_eeprom_layout >= 0x20) | |
| cl_eeprom_layout = LAYOUT_LEGACY; | |
| return 0; | |
| } | |
| void get_board_serial(struct tag_serialnr *serialnr) | |
| { | |
| u32 serial[2]; | |
| uint offset; | |
| memset(serialnr, 0, sizeof(*serialnr)); | |
| if (cl_eeprom_setup_layout()) | |
| return; | |
| offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? | |
| BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY; | |
| if (cl_eeprom_read(offset, (uchar *)serial, 8)) | |
| return; | |
| if (serial[0] != 0xffffffff && serial[1] != 0xffffffff) { | |
| serialnr->low = serial[0]; | |
| serialnr->high = serial[1]; | |
| } | |
| } | |
| /* | |
| * Routine: cl_eeprom_read_mac_addr | |
| * Description: read mac address and store it in buf. | |
| */ | |
| int cl_eeprom_read_mac_addr(uchar *buf) | |
| { | |
| uint offset; | |
| if (cl_eeprom_setup_layout()) | |
| return 0; | |
| offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? | |
| MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY; | |
| return cl_eeprom_read(offset, buf, 6); | |
| } | |
| static u32 board_rev; | |
| /* | |
| * Routine: cl_eeprom_get_board_rev | |
| * Description: read system revision from eeprom | |
| */ | |
| u32 cl_eeprom_get_board_rev(void) | |
| { | |
| char str[5]; /* Legacy representation can contain at most 4 digits */ | |
| uint offset = BOARD_REV_OFFSET_LEGACY; | |
| if (board_rev) | |
| return board_rev; | |
| if (cl_eeprom_setup_layout()) | |
| return 0; | |
| if (cl_eeprom_layout != LAYOUT_LEGACY) | |
| offset = BOARD_REV_OFFSET; | |
| if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE)) | |
| return 0; | |
| /* | |
| * Convert legacy syntactic representation to semantic | |
| * representation. i.e. for rev 1.00: 0x100 --> 0x64 | |
| */ | |
| if (cl_eeprom_layout == LAYOUT_LEGACY) { | |
| sprintf(str, "%x", board_rev); | |
| board_rev = simple_strtoul(str, NULL, 10); | |
| } | |
| return board_rev; | |
| }; |