| CONFIG_ARM=y | |
| # CONFIG_SPL_USE_ARCH_MEMCPY is not set | |
| # CONFIG_SPL_USE_ARCH_MEMSET is not set | |
| CONFIG_ARCH_OMAP2PLUS=y | |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 | |
| CONFIG_TARGET_OMAP3_EVM=y | |
| CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 | |
| CONFIG_NR_DRAM_BANKS=2 | |
| CONFIG_SPL=y | |
| CONFIG_SPL_TEXT_BASE=0x40200000 | |
| CONFIG_DISTRO_DEFAULTS=y | |
| CONFIG_USE_PREBOOT=y | |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y | |
| CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" | |
| CONFIG_VERSION_VARIABLE=y | |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y | |
| CONFIG_SPL_SEPARATE_BSS=y | |
| # CONFIG_SPL_FS_EXT4 is not set | |
| CONFIG_SPL_MTD_SUPPORT=y | |
| CONFIG_SYS_PROMPT="OMAP3_EVM # " | |
| CONFIG_CMD_SPL=y | |
| CONFIG_CMD_SPL_NAND_OFS=0x280000 | |
| CONFIG_CMD_SPL_WRITE_SIZE=0x20000 | |
| CONFIG_CMD_ASKENV=y | |
| # CONFIG_CMD_FLASH is not set | |
| CONFIG_CMD_GPIO=y | |
| CONFIG_CMD_I2C=y | |
| CONFIG_CMD_MMC=y | |
| CONFIG_CMD_NAND=y | |
| CONFIG_CMD_NAND_TRIMFFS=y | |
| CONFIG_CMD_SPI=y | |
| CONFIG_CMD_USB=y | |
| CONFIG_CMD_CACHE=y | |
| CONFIG_CMD_EXT4_WRITE=y | |
| CONFIG_CMD_FS_UUID=y | |
| CONFIG_CMD_MTDPARTS=y | |
| CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" | |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)" | |
| CONFIG_CMD_UBI=y | |
| # CONFIG_ISO_PARTITION is not set | |
| # CONFIG_EFI_PARTITION is not set | |
| CONFIG_SPL_PARTITION_UUIDS=y | |
| CONFIG_OF_CONTROL=y | |
| CONFIG_SPL_OF_CONTROL=y | |
| CONFIG_DEFAULT_DEVICE_TREE="omap3-evm" | |
| CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent" | |
| CONFIG_ENV_IS_IN_NAND=y | |
| CONFIG_SPL_DM=y | |
| CONFIG_SPL_DM_SEQ_ALIAS=y | |
| CONFIG_SPL_OF_TRANSLATE=y | |
| # CONFIG_SPL_BLK is not set | |
| CONFIG_USB_FUNCTION_FASTBOOT=y | |
| CONFIG_FASTBOOT_BUF_ADDR=0x82000000 | |
| CONFIG_DM_MMC=y | |
| # CONFIG_SPL_DM_MMC is not set | |
| CONFIG_MMC_OMAP_HS=y | |
| CONFIG_MTD=y | |
| CONFIG_MTD_RAW_NAND=y | |
| CONFIG_SYS_NAND_BUSWIDTH_16BIT=y | |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y | |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 | |
| CONFIG_SPL_NAND_SIMPLE=y | |
| CONFIG_SMC911X=y | |
| CONFIG_SMC911X_BASE=0x2C000000 | |
| CONFIG_SMC911X_32_BIT=y | |
| CONFIG_SPI=y | |
| CONFIG_DM_SPI=y | |
| CONFIG_OMAP3_SPI=y | |
| CONFIG_USB=y | |
| CONFIG_DM_USB=y | |
| # CONFIG_SPL_DM_USB is not set | |
| CONFIG_USB_EHCI_HCD=y | |
| CONFIG_USB_OMAP3=y | |
| CONFIG_USB_MUSB_GADGET=y | |
| CONFIG_USB_MUSB_OMAP2PLUS=y | |
| CONFIG_USB_GADGET=y | |
| CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" | |
| CONFIG_USB_GADGET_VENDOR_NUM=0x0451 | |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x5678 | |
| CONFIG_USB_ETHER=y | |
| CONFIG_FAT_WRITE=y | |
| CONFIG_BCH=y | |
| # CONFIG_EFI_LOADER is not set |