| if RCAR_32 | |
| config ARCH_RMOBILE_BOARD_STRING | |
| string "Renesas RCar Gen2 board name" | |
| default "Board" | |
| config RCAR_GEN2 | |
| bool "Renesas RCar Gen2" | |
| select PHY | |
| select PHY_RCAR_GEN2 | |
| config R8A7740 | |
| bool "Renesas SoC R8A7740" | |
| config R8A7790 | |
| bool "Renesas SoC R8A7790" | |
| select RCAR_GEN2 | |
| select ARM_CORTEX_A15_CVE_2017_5715 | |
| imply CLK_R8A7790 | |
| imply PINCTRL_PFC_R8A7790 | |
| config R8A7791 | |
| bool "Renesas SoC R8A7791" | |
| select RCAR_GEN2 | |
| select ARM_CORTEX_A15_CVE_2017_5715 | |
| imply CLK_R8A7791 | |
| imply PINCTRL_PFC_R8A7791 | |
| config R8A7792 | |
| bool "Renesas SoC R8A7792" | |
| select RCAR_GEN2 | |
| select ARM_CORTEX_A15_CVE_2017_5715 | |
| imply CLK_R8A7792 | |
| imply PINCTRL_PFC_R8A7792 | |
| config R8A7793 | |
| bool "Renesas SoC R8A7793" | |
| select RCAR_GEN2 | |
| select ARM_CORTEX_A15_CVE_2017_5715 | |
| imply CLK_R8A7793 | |
| imply PINCTRL_PFC_R8A7793 | |
| config R8A7794 | |
| bool "Renesas SoC R8A7794" | |
| select RCAR_GEN2 | |
| imply CLK_R8A7794 | |
| imply PINCTRL_PFC_R8A7794 | |
| choice | |
| prompt "Renesas ARM SoCs board select" | |
| optional | |
| config TARGET_ARMADILLO_800EVA | |
| bool "armadillo 800 eva board" | |
| config TARGET_BLANCHE | |
| bool "Blanche board" | |
| select DM | |
| select DM_SERIAL | |
| imply CMD_DM | |
| config TARGET_GOSE | |
| bool "Gose board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_KOELSCH | |
| bool "Koelsch board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_LAGER | |
| bool "Lager board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_KZM9G | |
| bool "KZM9D board" | |
| config TARGET_ALT | |
| bool "Alt board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_SILK | |
| bool "Silk board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_PORTER | |
| bool "Porter board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| config TARGET_STOUT | |
| bool "Stout board" | |
| select DM | |
| select DM_SERIAL | |
| select SPL_TINY_MEMSET | |
| select SUPPORT_SPL | |
| select SPL_USE_TINY_PRINTF | |
| imply CMD_DM | |
| endchoice | |
| config SYS_SOC | |
| default "rmobile" | |
| config RMOBILE_EXTRAM_BOOT | |
| bool "Enable boot from RAM" | |
| depends on TARGET_ALT || TARGET_BLANCHE || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT | |
| default n | |
| choice | |
| prompt "Qos setting primary" | |
| depends on TARGET_ALT || TARGET_BLANCHE || TARGET_GOSE || TARGET_KOELSCH || TARGET_LAGER | |
| default QOS_PRI_NORMAL | |
| config QOS_PRI_NORMAL | |
| bool "Non primary" | |
| help | |
| Select normal mode for QoS setting. | |
| config QOS_PRI_MEDIA | |
| bool "Media primary" | |
| help | |
| Select multimedia primary mode for QoS setting. | |
| config QOS_PRI_GFX | |
| bool "GFX primary" | |
| help | |
| Select GFX(graphics) primary mode for QoS setting. | |
| endchoice | |
| source "board/atmark-techno/armadillo-800eva/Kconfig" | |
| source "board/renesas/blanche/Kconfig" | |
| source "board/renesas/gose/Kconfig" | |
| source "board/renesas/koelsch/Kconfig" | |
| source "board/renesas/lager/Kconfig" | |
| source "board/kmc/kzm9g/Kconfig" | |
| source "board/renesas/alt/Kconfig" | |
| source "board/renesas/silk/Kconfig" | |
| source "board/renesas/porter/Kconfig" | |
| source "board/renesas/stout/Kconfig" | |
| endif |