| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> | |
| */ | |
| #include <config.h> | |
| #include <gt64120.h> | |
| #include <msc01.h> | |
| #include <pci.h> | |
| #include <asm/addrspace.h> | |
| #include <asm/asm.h> | |
| #include <asm/regdef.h> | |
| #include <asm/malta.h> | |
| #include <asm/mipsregs.h> | |
| #ifdef CONFIG_SYS_BIG_ENDIAN | |
| #define CPU_TO_GT32(_x) ((_x)) | |
| #else | |
| #define CPU_TO_GT32(_x) ( \ | |
| (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \ | |
| (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24)) | |
| #endif | |
| .text | |
| .set noreorder | |
| .globl lowlevel_init | |
| lowlevel_init: | |
| /* detect the core card */ | |
| PTR_LI t0, CKSEG1ADDR(MALTA_REVISION) | |
| lw t0, 0(t0) | |
| srl t0, t0, MALTA_REVISION_CORID_SHF | |
| andi t0, t0, (MALTA_REVISION_CORID_MSK >> \ | |
| MALTA_REVISION_CORID_SHF) | |
| /* core cards using the gt64120 system controller */ | |
| li t1, MALTA_REVISION_CORID_CORE_LV | |
| beq t0, t1, _gt64120 | |
| /* core cards using the MSC01 system controller */ | |
| li t1, MALTA_REVISION_CORID_CORE_FPGA6 | |
| beq t0, t1, _msc01 | |
| nop | |
| /* unknown system controller */ | |
| b . | |
| nop | |
| /* | |
| * Load BAR registers of GT64120 as done by YAMON | |
| * | |
| * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com> | |
| * to the barebox mailing list. | |
| * The subject of the original patch: | |
| * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map' | |
| * URL: | |
| * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html | |
| * | |
| * based on write_bootloader() in qemu.git/hw/mips_malta.c | |
| * see GT64120 manual and qemu.git/hw/gt64xxx.c for details | |
| */ | |
| _gt64120: | |
| /* move GT64120 registers from 0x14000000 to 0x1be00000 */ | |
| PTR_LI t1, CKSEG1ADDR(GT_DEF_BASE) | |
| li t0, CPU_TO_GT32(0xdf000000) | |
| sw t0, GT_ISD_OFS(t1) | |
| /* setup MEM-to-PCI0 mapping */ | |
| PTR_LI t1, CKSEG1ADDR(MALTA_GT_BASE) | |
| /* setup PCI0 io window to 0x18000000-0x181fffff */ | |
| li t0, CPU_TO_GT32(0xc0000000) | |
| sw t0, GT_PCI0IOLD_OFS(t1) | |
| li t0, CPU_TO_GT32(0x40000000) | |
| sw t0, GT_PCI0IOHD_OFS(t1) | |
| /* setup PCI0 mem windows */ | |
| li t0, CPU_TO_GT32(0x80000000) | |
| sw t0, GT_PCI0M0LD_OFS(t1) | |
| li t0, CPU_TO_GT32(0x3f000000) | |
| sw t0, GT_PCI0M0HD_OFS(t1) | |
| li t0, CPU_TO_GT32(0xc1000000) | |
| sw t0, GT_PCI0M1LD_OFS(t1) | |
| li t0, CPU_TO_GT32(0x5e000000) | |
| sw t0, GT_PCI0M1HD_OFS(t1) | |
| jr ra | |
| nop | |
| /* | |
| * | |
| */ | |
| _msc01: | |
| /* setup peripheral bus controller clock divide */ | |
| PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_PBC_BASE) | |
| li t1, 0x1 << MSC01_PBC_CLKCFG_SHF | |
| sw t1, MSC01_PBC_CLKCFG_OFS(t0) | |
| /* tweak peripheral bus controller timings */ | |
| li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \ | |
| (0x1 << MSC01_PBC_CS0TIM_CAT_SHF) | |
| sw t1, MSC01_PBC_CS0TIM_OFS(t0) | |
| li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \ | |
| (0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \ | |
| (0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \ | |
| (0x2 << MSC01_PBC_CS0RW_WAT_SHF) | |
| sw t1, MSC01_PBC_CS0RW_OFS(t0) | |
| lw t1, MSC01_PBC_CS0CFG_OFS(t0) | |
| li t2, MSC01_PBC_CS0CFG_DTYP_MSK | |
| and t1, t2 | |
| ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \ | |
| (0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \ | |
| (0x10 << MSC01_PBC_CS0CFG_WS_SHF) | |
| sw t1, MSC01_PBC_CS0CFG_OFS(t0) | |
| /* setup basic address decode */ | |
| PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_BIU_BASE) | |
| li t1, 0x0 | |
| li t2, -CONFIG_SYS_MEM_SIZE | |
| sw t1, MSC01_BIU_MCBAS1L_OFS(t0) | |
| sw t2, MSC01_BIU_MCMSK1L_OFS(t0) | |
| sw t1, MSC01_BIU_MCBAS2L_OFS(t0) | |
| sw t2, MSC01_BIU_MCMSK2L_OFS(t0) | |
| /* initialise IP1 - unused */ | |
| li t1, MALTA_MSC01_IP1_BASE | |
| li t2, -MALTA_MSC01_IP1_SIZE | |
| sw t1, MSC01_BIU_IP1BAS1L_OFS(t0) | |
| sw t2, MSC01_BIU_IP1MSK1L_OFS(t0) | |
| sw t1, MSC01_BIU_IP1BAS2L_OFS(t0) | |
| sw t2, MSC01_BIU_IP1MSK2L_OFS(t0) | |
| /* initialise IP2 - PCI */ | |
| li t1, MALTA_MSC01_IP2_BASE1 | |
| li t2, -MALTA_MSC01_IP2_SIZE1 | |
| sw t1, MSC01_BIU_IP2BAS1L_OFS(t0) | |
| sw t2, MSC01_BIU_IP2MSK1L_OFS(t0) | |
| li t1, MALTA_MSC01_IP2_BASE2 | |
| li t2, -MALTA_MSC01_IP2_SIZE2 | |
| sw t1, MSC01_BIU_IP2BAS2L_OFS(t0) | |
| sw t2, MSC01_BIU_IP2MSK2L_OFS(t0) | |
| /* initialise IP3 - peripheral bus controller */ | |
| li t1, MALTA_MSC01_IP3_BASE | |
| li t2, -MALTA_MSC01_IP3_SIZE | |
| sw t1, MSC01_BIU_IP3BAS1L_OFS(t0) | |
| sw t2, MSC01_BIU_IP3MSK1L_OFS(t0) | |
| sw t1, MSC01_BIU_IP3BAS2L_OFS(t0) | |
| sw t2, MSC01_BIU_IP3MSK2L_OFS(t0) | |
| /* setup PCI memory */ | |
| PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_PCI_BASE) | |
| li t1, MALTA_MSC01_PCIMEM_BASE | |
| li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK | |
| li t3, MALTA_MSC01_PCIMEM_MAP | |
| sw t1, MSC01_PCI_SC2PMBASL_OFS(t0) | |
| sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0) | |
| sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0) | |
| /* setup PCI I/O */ | |
| li t1, MALTA_MSC01_PCIIO_BASE | |
| li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK | |
| li t3, MALTA_MSC01_PCIIO_MAP | |
| sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0) | |
| sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0) | |
| sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0) | |
| /* setup PCI_BAR0 memory window */ | |
| li t1, -CONFIG_SYS_MEM_SIZE | |
| sw t1, MSC01_PCI_BAR0_OFS(t0) | |
| /* setup PCI to SysCon/CPU translation */ | |
| sw t1, MSC01_PCI_P2SCMSKL_OFS(t0) | |
| sw zero, MSC01_PCI_P2SCMAPL_OFS(t0) | |
| /* setup PCI vendor & device IDs */ | |
| li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \ | |
| (PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF) | |
| sw t1, MSC01_PCI_HEAD0_OFS(t0) | |
| /* setup PCI subsystem vendor & device IDs */ | |
| sw t1, MSC01_PCI_HEAD11_OFS(t0) | |
| /* setup PCI class, revision */ | |
| li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \ | |
| (0x1 << MSC01_PCI_HEAD2_REV_SHF) | |
| sw t1, MSC01_PCI_HEAD2_OFS(t0) | |
| /* ensure a sane setup */ | |
| sw zero, MSC01_PCI_HEAD3_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD4_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD5_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD6_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD7_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD8_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD9_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD10_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD12_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD13_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD14_OFS(t0) | |
| sw zero, MSC01_PCI_HEAD15_OFS(t0) | |
| /* setup PCI command register */ | |
| li t1, (PCI_COMMAND_FAST_BACK | \ | |
| PCI_COMMAND_SERR | \ | |
| PCI_COMMAND_PARITY | \ | |
| PCI_COMMAND_MASTER | \ | |
| PCI_COMMAND_MEMORY) | |
| sw t1, MSC01_PCI_HEAD1_OFS(t0) | |
| /* setup PCI byte swapping */ | |
| #ifdef CONFIG_SYS_BIG_ENDIAN | |
| li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \ | |
| (0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF) | |
| sw t1, MSC01_PCI_SWAP_OFS(t0) | |
| #else | |
| sw zero, MSC01_PCI_SWAP_OFS(t0) | |
| #endif | |
| /* enable PCI host configuration cycles */ | |
| lw t1, MSC01_PCI_CFG_OFS(t0) | |
| li t2, MSC01_PCI_CFG_RA_MSK | \ | |
| MSC01_PCI_CFG_G_MSK | \ | |
| MSC01_PCI_CFG_EN_MSK | |
| or t1, t1, t2 | |
| sw t1, MSC01_PCI_CFG_OFS(t0) | |
| jr ra | |
| nop |