| /* |
| * WPA Supplicant - Common definitions |
| * Copyright (c) 2004-2008, Jouni Malinen <[email protected]> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Alternatively, this software may be distributed under the terms of BSD |
| * license. |
| * |
| * See README and COPYING for more details. |
| */ |
| |
| #ifndef DEFS_H |
| #define DEFS_H |
| |
| #ifdef FALSE |
| #undef FALSE |
| #endif |
| #ifdef TRUE |
| #undef TRUE |
| #endif |
| typedef enum { FALSE = 0, TRUE = 1 } Boolean; |
| |
| |
| #define WPA_CIPHER_NONE BIT(0) |
| #define WPA_CIPHER_WEP40 BIT(1) |
| #define WPA_CIPHER_WEP104 BIT(2) |
| #define WPA_CIPHER_TKIP BIT(3) |
| #define WPA_CIPHER_CCMP BIT(4) |
| #ifdef CONFIG_IEEE80211W |
| #define WPA_CIPHER_AES_128_CMAC BIT(5) |
| #endif /* CONFIG_IEEE80211W */ |
| |
| #define WPA_KEY_MGMT_IEEE8021X BIT(0) |
| #define WPA_KEY_MGMT_PSK BIT(1) |
| #define WPA_KEY_MGMT_NONE BIT(2) |
| #define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3) |
| #define WPA_KEY_MGMT_WPA_NONE BIT(4) |
| #define WPA_KEY_MGMT_FT_IEEE8021X BIT(5) |
| #define WPA_KEY_MGMT_FT_PSK BIT(6) |
| #define WPA_KEY_MGMT_IEEE8021X_SHA256 BIT(7) |
| #define WPA_KEY_MGMT_PSK_SHA256 BIT(8) |
| #define WPA_KEY_MGMT_WPS BIT(9) |
| |
| static inline int wpa_key_mgmt_wpa_ieee8021x(int akm) |
| { |
| return akm == WPA_KEY_MGMT_IEEE8021X || |
| akm == WPA_KEY_MGMT_FT_IEEE8021X || |
| akm == WPA_KEY_MGMT_IEEE8021X_SHA256; |
| } |
| |
| static inline int wpa_key_mgmt_wpa_psk(int akm) |
| { |
| return akm == WPA_KEY_MGMT_PSK || |
| akm == WPA_KEY_MGMT_FT_PSK || |
| akm == WPA_KEY_MGMT_PSK_SHA256; |
| } |
| |
| static inline int wpa_key_mgmt_ft(int akm) |
| { |
| return akm == WPA_KEY_MGMT_FT_PSK || |
| akm == WPA_KEY_MGMT_FT_IEEE8021X; |
| } |
| |
| static inline int wpa_key_mgmt_sha256(int akm) |
| { |
| return akm == WPA_KEY_MGMT_PSK_SHA256 || |
| akm == WPA_KEY_MGMT_IEEE8021X_SHA256; |
| } |
| |
| |
| #define WPA_PROTO_WPA BIT(0) |
| #define WPA_PROTO_RSN BIT(1) |
| |
| #define WPA_AUTH_ALG_OPEN BIT(0) |
| #define WPA_AUTH_ALG_SHARED BIT(1) |
| #define WPA_AUTH_ALG_LEAP BIT(2) |
| |
| |
| typedef enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP, |
| WPA_ALG_IGTK, WPA_ALG_PMK } wpa_alg; |
| typedef enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, |
| CIPHER_WEP104 } wpa_cipher; |
| typedef enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, |
| KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE, |
| KEY_MGMT_FT_802_1X, KEY_MGMT_FT_PSK, |
| KEY_MGMT_802_1X_SHA256, KEY_MGMT_PSK_SHA256, |
| KEY_MGMT_WPS |
| } wpa_key_mgmt; |
| |
| /** |
| * enum wpa_states - wpa_supplicant state |
| * |
| * These enumeration values are used to indicate the current wpa_supplicant |
| * state (wpa_s->wpa_state). The current state can be retrieved with |
| * wpa_supplicant_get_state() function and the state can be changed by calling |
| * wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the |
| * wrapper functions wpa_sm_get_state() and wpa_sm_set_state() should be used |
| * to access the state variable. |
| */ |
| typedef enum { |
| /** |
| * WPA_DISCONNECTED - Disconnected state |
| * |
| * This state indicates that client is not associated, but is likely to |
| * start looking for an access point. This state is entered when a |
| * connection is lost. |
| */ |
| WPA_DISCONNECTED, |
| |
| /** |
| * WPA_INACTIVE - Inactive state (wpa_supplicant disabled) |
| * |
| * This state is entered if there are no enabled networks in the |
| * configuration. wpa_supplicant is not trying to associate with a new |
| * network and external interaction (e.g., ctrl_iface call to add or |
| * enable a network) is needed to start association. |
| */ |
| WPA_INACTIVE, |
| |
| /** |
| * WPA_SCANNING - Scanning for a network |
| * |
| * This state is entered when wpa_supplicant starts scanning for a |
| * network. |
| */ |
| WPA_SCANNING, |
| |
| /** |
| * WPA_ASSOCIATING - Trying to associate with a BSS/SSID |
| * |
| * This state is entered when wpa_supplicant has found a suitable BSS |
| * to associate with and the driver is configured to try to associate |
| * with this BSS in ap_scan=1 mode. When using ap_scan=2 mode, this |
| * state is entered when the driver is configured to try to associate |
| * with a network using the configured SSID and security policy. |
| */ |
| WPA_ASSOCIATING, |
| |
| /** |
| * WPA_ASSOCIATED - Association completed |
| * |
| * This state is entered when the driver reports that association has |
| * been successfully completed with an AP. If IEEE 802.1X is used |
| * (with or without WPA/WPA2), wpa_supplicant remains in this state |
| * until the IEEE 802.1X/EAPOL authentication has been completed. |
| */ |
| WPA_ASSOCIATED, |
| |
| /** |
| * WPA_4WAY_HANDSHAKE - WPA 4-Way Key Handshake in progress |
| * |
| * This state is entered when WPA/WPA2 4-Way Handshake is started. In |
| * case of WPA-PSK, this happens when receiving the first EAPOL-Key |
| * frame after association. In case of WPA-EAP, this state is entered |
| * when the IEEE 802.1X/EAPOL authentication has been completed. |
| */ |
| WPA_4WAY_HANDSHAKE, |
| |
| /** |
| * WPA_GROUP_HANDSHAKE - WPA Group Key Handshake in progress |
| * |
| * This state is entered when 4-Way Key Handshake has been completed |
| * (i.e., when the supplicant sends out message 4/4) and when Group |
| * Key rekeying is started by the AP (i.e., when supplicant receives |
| * message 1/2). |
| */ |
| WPA_GROUP_HANDSHAKE, |
| |
| /** |
| * WPA_COMPLETED - All authentication completed |
| * |
| * This state is entered when the full authentication process is |
| * completed. In case of WPA2, this happens when the 4-Way Handshake is |
| * successfully completed. With WPA, this state is entered after the |
| * Group Key Handshake; with IEEE 802.1X (non-WPA) connection is |
| * completed after dynamic keys are received (or if not used, after |
| * the EAP authentication has been completed). With static WEP keys and |
| * plaintext connections, this state is entered when an association |
| * has been completed. |
| * |
| * This state indicates that the supplicant has completed its |
| * processing for the association phase and that data connection is |
| * fully configured. |
| */ |
| WPA_COMPLETED |
| } wpa_states; |
| |
| #define MLME_SETPROTECTION_PROTECT_TYPE_NONE 0 |
| #define MLME_SETPROTECTION_PROTECT_TYPE_RX 1 |
| #define MLME_SETPROTECTION_PROTECT_TYPE_TX 2 |
| #define MLME_SETPROTECTION_PROTECT_TYPE_RX_TX 3 |
| |
| #define MLME_SETPROTECTION_KEY_TYPE_GROUP 0 |
| #define MLME_SETPROTECTION_KEY_TYPE_PAIRWISE 1 |
| |
| #endif /* DEFS_H */ |