| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.net.wifi; |
| |
| import static android.net.wifi.WifiManager.WIFI_STATE_DISABLED; |
| import static android.net.wifi.WifiManager.WIFI_STATE_DISABLING; |
| import static android.net.wifi.WifiManager.WIFI_STATE_ENABLED; |
| import static android.net.wifi.WifiManager.WIFI_STATE_ENABLING; |
| import static android.net.wifi.WifiManager.WIFI_STATE_UNKNOWN; |
| |
| /** |
| * TODO: Add soft AP states as part of WIFI_STATE_XXX |
| * Retain WIFI_STATE_ENABLING that indicates driver is loading |
| * Add WIFI_STATE_AP_ENABLED to indicate soft AP has started |
| * and WIFI_STATE_FAILED for failure |
| * Deprecate WIFI_STATE_UNKNOWN |
| * |
| * Doing this will simplify the logic for sending broadcasts |
| */ |
| import static android.net.wifi.WifiManager.WIFI_AP_STATE_DISABLED; |
| import static android.net.wifi.WifiManager.WIFI_AP_STATE_DISABLING; |
| import static android.net.wifi.WifiManager.WIFI_AP_STATE_ENABLED; |
| import static android.net.wifi.WifiManager.WIFI_AP_STATE_ENABLING; |
| import static android.net.wifi.WifiManager.WIFI_AP_STATE_FAILED; |
| |
| import android.app.ActivityManagerNative; |
| import android.net.NetworkInfo; |
| import android.net.DhcpInfo; |
| import android.net.NetworkUtils; |
| import android.net.ConnectivityManager; |
| import android.net.NetworkInfo.DetailedState; |
| import android.net.LinkProperties; |
| import android.net.wifi.WifiConfiguration.Status; |
| import android.os.Binder; |
| import android.os.Message; |
| import android.os.Parcelable; |
| import android.os.Handler; |
| import android.os.IBinder; |
| import android.os.INetworkManagementService; |
| import android.os.PowerManager; |
| import android.os.SystemProperties; |
| import android.os.RemoteException; |
| import android.os.ServiceManager; |
| import android.os.Process; |
| import android.os.WorkSource; |
| import android.provider.Settings; |
| import android.text.TextUtils; |
| import android.util.EventLog; |
| import android.util.Log; |
| import android.util.Slog; |
| import android.app.backup.IBackupManager; |
| import android.bluetooth.BluetoothDevice; |
| import android.bluetooth.BluetoothHeadset; |
| import android.bluetooth.BluetoothA2dp; |
| import android.content.ContentResolver; |
| import android.content.Intent; |
| import android.content.Context; |
| import android.database.ContentObserver; |
| import com.android.internal.app.IBatteryStats; |
| import com.android.internal.util.HierarchicalState; |
| import com.android.internal.util.HierarchicalStateMachine; |
| |
| import java.net.InetAddress; |
| import java.net.NetworkInterface; |
| import java.net.SocketException; |
| import java.net.UnknownHostException; |
| import java.util.ArrayList; |
| import java.util.BitSet; |
| import java.util.Iterator; |
| import java.util.LinkedHashMap; |
| import java.util.List; |
| import java.util.Map; |
| import java.util.Set; |
| import java.util.concurrent.atomic.AtomicBoolean; |
| import java.util.concurrent.atomic.AtomicInteger; |
| import java.util.regex.Pattern; |
| |
| /** |
| * Track the state of Wifi connectivity. All event handling is done here, |
| * and all changes in connectivity state are initiated here. |
| * |
| * @hide |
| */ |
| //TODO: we still need frequent scanning for the case when |
| // we issue disconnect but need scan results for open network notification |
| public class WifiStateMachine extends HierarchicalStateMachine { |
| |
| private static final String TAG = "WifiStateMachine"; |
| private static final String NETWORKTYPE = "WIFI"; |
| private static final boolean DBG = false; |
| |
| /* TODO: fetch a configurable interface */ |
| private static final String SOFTAP_IFACE = "wl0.1"; |
| |
| private WifiMonitor mWifiMonitor; |
| private INetworkManagementService nwService; |
| private ConnectivityManager mCm; |
| |
| /* Scan results handling */ |
| private List<ScanResult> mScanResults; |
| private static final Pattern scanResultPattern = Pattern.compile("\t+"); |
| private static final int SCAN_RESULT_CACHE_SIZE = 80; |
| private final LinkedHashMap<String, ScanResult> mScanResultCache; |
| |
| private String mInterfaceName; |
| |
| private int mNumAllowedChannels = 0; |
| private int mLastSignalLevel = -1; |
| private String mLastBssid; |
| private int mLastNetworkId; |
| private boolean mEnableRssiPolling = false; |
| private boolean mPasswordKeyMayBeIncorrect = false; |
| private int mReconnectCount = 0; |
| private boolean mIsScanMode = false; |
| |
| /** |
| * Instance of the bluetooth headset helper. This needs to be created |
| * early because there is a delay before it actually 'connects', as |
| * noted by its javadoc. If we check before it is connected, it will be |
| * in an error state and we will not disable coexistence. |
| */ |
| private BluetoothHeadset mBluetoothHeadset; |
| |
| private BluetoothA2dp mBluetoothA2dp; |
| |
| private LinkProperties mLinkProperties; |
| |
| // Held during driver load and unload |
| private static PowerManager.WakeLock sWakeLock; |
| |
| private Context mContext; |
| |
| private DhcpInfo mDhcpInfo; |
| private WifiInfo mWifiInfo; |
| private NetworkInfo mNetworkInfo; |
| private SupplicantStateTracker mSupplicantStateTracker; |
| /* Connection to a specific network involves disabling all networks, |
| * this flag tracks if networks need to be re-enabled */ |
| private boolean mEnableAllNetworks = false; |
| /* Track if WPS was started since we need to re-enable networks |
| * and load configuration afterwards */ |
| private boolean mWpsStarted = false; |
| |
| // Event log tags (must be in sync with event-log-tags) |
| private static final int EVENTLOG_WIFI_STATE_CHANGED = 50021; |
| private static final int EVENTLOG_WIFI_EVENT_HANDLED = 50022; |
| private static final int EVENTLOG_SUPPLICANT_STATE_CHANGED = 50023; |
| |
| /* Load the driver */ |
| private static final int CMD_LOAD_DRIVER = 1; |
| /* Unload the driver */ |
| private static final int CMD_UNLOAD_DRIVER = 2; |
| /* Indicates driver load succeeded */ |
| private static final int CMD_LOAD_DRIVER_SUCCESS = 3; |
| /* Indicates driver load failed */ |
| private static final int CMD_LOAD_DRIVER_FAILURE = 4; |
| /* Indicates driver unload succeeded */ |
| private static final int CMD_UNLOAD_DRIVER_SUCCESS = 5; |
| /* Indicates driver unload failed */ |
| private static final int CMD_UNLOAD_DRIVER_FAILURE = 6; |
| |
| /* Start the supplicant */ |
| private static final int CMD_START_SUPPLICANT = 11; |
| /* Stop the supplicant */ |
| private static final int CMD_STOP_SUPPLICANT = 12; |
| /* Start the driver */ |
| private static final int CMD_START_DRIVER = 13; |
| /* Start the driver */ |
| private static final int CMD_STOP_DRIVER = 14; |
| /* Indicates DHCP succeded */ |
| private static final int CMD_IP_CONFIG_SUCCESS = 15; |
| /* Indicates DHCP failed */ |
| private static final int CMD_IP_CONFIG_FAILURE = 16; |
| /* Re-configure interface */ |
| private static final int CMD_RECONFIGURE_IP = 17; |
| |
| |
| /* Start the soft access point */ |
| private static final int CMD_START_AP = 21; |
| /* Stop the soft access point */ |
| private static final int CMD_STOP_AP = 22; |
| |
| |
| /* Supplicant events */ |
| /* Connection to supplicant established */ |
| private static final int SUP_CONNECTION_EVENT = 31; |
| /* Connection to supplicant lost */ |
| private static final int SUP_DISCONNECTION_EVENT = 32; |
| /* Driver start completed */ |
| private static final int DRIVER_START_EVENT = 33; |
| /* Driver stop completed */ |
| private static final int DRIVER_STOP_EVENT = 34; |
| /* Network connection completed */ |
| private static final int NETWORK_CONNECTION_EVENT = 36; |
| /* Network disconnection completed */ |
| private static final int NETWORK_DISCONNECTION_EVENT = 37; |
| /* Scan results are available */ |
| private static final int SCAN_RESULTS_EVENT = 38; |
| /* Supplicate state changed */ |
| private static final int SUPPLICANT_STATE_CHANGE_EVENT = 39; |
| /* Password may be incorrect */ |
| private static final int PASSWORD_MAY_BE_INCORRECT_EVENT = 40; |
| |
| /* Supplicant commands */ |
| /* Is supplicant alive ? */ |
| private static final int CMD_PING_SUPPLICANT = 51; |
| /* Add/update a network configuration */ |
| private static final int CMD_ADD_OR_UPDATE_NETWORK = 52; |
| /* Delete a network */ |
| private static final int CMD_REMOVE_NETWORK = 53; |
| /* Enable a network. The device will attempt a connection to the given network. */ |
| private static final int CMD_ENABLE_NETWORK = 54; |
| /* Disable a network. The device does not attempt a connection to the given network. */ |
| private static final int CMD_DISABLE_NETWORK = 55; |
| /* Blacklist network. De-prioritizes the given BSSID for connection. */ |
| private static final int CMD_BLACKLIST_NETWORK = 56; |
| /* Clear the blacklist network list */ |
| private static final int CMD_CLEAR_BLACKLIST = 57; |
| /* Save configuration */ |
| private static final int CMD_SAVE_CONFIG = 58; |
| |
| /* Supplicant commands after driver start*/ |
| /* Initiate a scan */ |
| private static final int CMD_START_SCAN = 71; |
| /* Set scan mode. CONNECT_MODE or SCAN_ONLY_MODE */ |
| private static final int CMD_SET_SCAN_MODE = 72; |
| /* Set scan type. SCAN_ACTIVE or SCAN_PASSIVE */ |
| private static final int CMD_SET_SCAN_TYPE = 73; |
| /* Disconnect from a network */ |
| private static final int CMD_DISCONNECT = 74; |
| /* Reconnect to a network */ |
| private static final int CMD_RECONNECT = 75; |
| /* Reassociate to a network */ |
| private static final int CMD_REASSOCIATE = 76; |
| /* Set power mode |
| * POWER_MODE_ACTIVE |
| * POWER_MODE_AUTO |
| */ |
| private static final int CMD_SET_POWER_MODE = 77; |
| /* Set bluetooth co-existence |
| * BLUETOOTH_COEXISTENCE_MODE_ENABLED |
| * BLUETOOTH_COEXISTENCE_MODE_DISABLED |
| * BLUETOOTH_COEXISTENCE_MODE_SENSE |
| */ |
| private static final int CMD_SET_BLUETOOTH_COEXISTENCE = 78; |
| /* Enable/disable bluetooth scan mode |
| * true(1) |
| * false(0) |
| */ |
| private static final int CMD_SET_BLUETOOTH_SCAN_MODE = 79; |
| /* Set number of allowed channels */ |
| private static final int CMD_SET_NUM_ALLOWED_CHANNELS = 80; |
| /* Request connectivity manager wake lock before driver stop */ |
| private static final int CMD_REQUEST_CM_WAKELOCK = 81; |
| /* Enables RSSI poll */ |
| private static final int CMD_ENABLE_RSSI_POLL = 82; |
| /* RSSI poll */ |
| private static final int CMD_RSSI_POLL = 83; |
| /* Get current RSSI */ |
| private static final int CMD_GET_RSSI = 84; |
| /* Get approx current RSSI */ |
| private static final int CMD_GET_RSSI_APPROX = 85; |
| /* Get link speed on connection */ |
| private static final int CMD_GET_LINK_SPEED = 86; |
| /* Radio mac address */ |
| private static final int CMD_GET_MAC_ADDR = 87; |
| /* Set up packet filtering */ |
| private static final int CMD_START_PACKET_FILTERING = 88; |
| /* Clear packet filter */ |
| private static final int CMD_STOP_PACKET_FILTERING = 89; |
| /* Connect to a specified network (network id |
| * or WifiConfiguration) This involves increasing |
| * the priority of the network, enabling the network |
| * (while disabling others) and issuing a reconnect. |
| * Note that CMD_RECONNECT just does a reconnect to |
| * an existing network. All the networks get enabled |
| * upon a successful connection or a failure. |
| */ |
| private static final int CMD_CONNECT_NETWORK = 90; |
| /* Save the specified network. This involves adding |
| * an enabled network (if new) and updating the |
| * config and issuing a save on supplicant config. |
| */ |
| private static final int CMD_SAVE_NETWORK = 91; |
| /* Delete the specified network. This involves |
| * removing the network and issuing a save on |
| * supplicant config. |
| */ |
| private static final int CMD_FORGET_NETWORK = 92; |
| /* Start Wi-Fi protected setup */ |
| private static final int CMD_START_WPS = 93; |
| |
| |
| /** |
| * Interval in milliseconds between polling for connection |
| * status items that are not sent via asynchronous events. |
| * An example is RSSI (signal strength). |
| */ |
| private static final int POLL_RSSI_INTERVAL_MSECS = 3000; |
| |
| private static final int CONNECT_MODE = 1; |
| private static final int SCAN_ONLY_MODE = 2; |
| |
| private static final int SCAN_ACTIVE = 1; |
| private static final int SCAN_PASSIVE = 2; |
| |
| /* Auto allows 802.11A/B/G operation */ |
| private static final int BAND_AUTO = 0; |
| /* 5GHz allows 802.11A operation */ |
| private static final int BAND_5G = 1; |
| /* 2.4GHz allows 802.11B/G operation */ |
| private static final int BAND_2G = 2; |
| |
| /** |
| * The maximum number of times we will retry a connection to an access point |
| * for which we have failed in acquiring an IP address from DHCP. A value of |
| * N means that we will make N+1 connection attempts in all. |
| * <p> |
| * See {@link Settings.Secure#WIFI_MAX_DHCP_RETRY_COUNT}. This is the default |
| * value if a Settings value is not present. |
| */ |
| private static final int DEFAULT_MAX_DHCP_RETRIES = 9; |
| |
| private static final int DRIVER_POWER_MODE_ACTIVE = 1; |
| private static final int DRIVER_POWER_MODE_AUTO = 0; |
| |
| /* Default parent state */ |
| private HierarchicalState mDefaultState = new DefaultState(); |
| /* Temporary initial state */ |
| private HierarchicalState mInitialState = new InitialState(); |
| /* Unloading the driver */ |
| private HierarchicalState mDriverUnloadingState = new DriverUnloadingState(); |
| /* Loading the driver */ |
| private HierarchicalState mDriverUnloadedState = new DriverUnloadedState(); |
| /* Driver load/unload failed */ |
| private HierarchicalState mDriverFailedState = new DriverFailedState(); |
| /* Driver loading */ |
| private HierarchicalState mDriverLoadingState = new DriverLoadingState(); |
| /* Driver loaded */ |
| private HierarchicalState mDriverLoadedState = new DriverLoadedState(); |
| /* Driver loaded, waiting for supplicant to start */ |
| private HierarchicalState mWaitForSupState = new WaitForSupState(); |
| |
| /* Driver loaded and supplicant ready */ |
| private HierarchicalState mDriverSupReadyState = new DriverSupReadyState(); |
| /* Driver start issued, waiting for completed event */ |
| private HierarchicalState mDriverStartingState = new DriverStartingState(); |
| /* Driver started */ |
| private HierarchicalState mDriverStartedState = new DriverStartedState(); |
| /* Driver stopping */ |
| private HierarchicalState mDriverStoppingState = new DriverStoppingState(); |
| /* Driver stopped */ |
| private HierarchicalState mDriverStoppedState = new DriverStoppedState(); |
| /* Scan for networks, no connection will be established */ |
| private HierarchicalState mScanModeState = new ScanModeState(); |
| /* Connecting to an access point */ |
| private HierarchicalState mConnectModeState = new ConnectModeState(); |
| /* Fetching IP after network connection (assoc+auth complete) */ |
| private HierarchicalState mConnectingState = new ConnectingState(); |
| /* Connected with IP addr */ |
| private HierarchicalState mConnectedState = new ConnectedState(); |
| /* disconnect issued, waiting for network disconnect confirmation */ |
| private HierarchicalState mDisconnectingState = new DisconnectingState(); |
| /* Network is not connected, supplicant assoc+auth is not complete */ |
| private HierarchicalState mDisconnectedState = new DisconnectedState(); |
| |
| /* Soft Ap is running */ |
| private HierarchicalState mSoftApStartedState = new SoftApStartedState(); |
| |
| |
| /** |
| * One of {@link WifiManager#WIFI_STATE_DISABLED}, |
| * {@link WifiManager#WIFI_STATE_DISABLING}, |
| * {@link WifiManager#WIFI_STATE_ENABLED}, |
| * {@link WifiManager#WIFI_STATE_ENABLING}, |
| * {@link WifiManager#WIFI_STATE_UNKNOWN} |
| * |
| */ |
| private final AtomicInteger mWifiState = new AtomicInteger(WIFI_STATE_DISABLED); |
| |
| /** |
| * One of {@link WifiManager#WIFI_AP_STATE_DISABLED}, |
| * {@link WifiManager#WIFI_AP_STATE_DISABLING}, |
| * {@link WifiManager#WIFI_AP_STATE_ENABLED}, |
| * {@link WifiManager#WIFI_AP_STATE_ENABLING}, |
| * {@link WifiManager#WIFI_AP_STATE_FAILED} |
| * |
| */ |
| private final AtomicInteger mWifiApState = new AtomicInteger(WIFI_AP_STATE_DISABLED); |
| |
| private final AtomicInteger mLastEnableUid = new AtomicInteger(Process.myUid()); |
| private final AtomicInteger mLastApEnableUid = new AtomicInteger(Process.myUid()); |
| |
| /** |
| * Keep track of whether WIFI is running. |
| */ |
| private boolean mIsRunning = false; |
| |
| /** |
| * Keep track of whether we last told the battery stats we had started. |
| */ |
| private boolean mReportedRunning = false; |
| |
| /** |
| * Most recently set source of starting WIFI. |
| */ |
| private final WorkSource mRunningWifiUids = new WorkSource(); |
| |
| /** |
| * The last reported UIDs that were responsible for starting WIFI. |
| */ |
| private final WorkSource mLastRunningWifiUids = new WorkSource(); |
| |
| private final IBatteryStats mBatteryStats; |
| |
| public WifiStateMachine(Context context) { |
| super(TAG); |
| |
| mContext = context; |
| |
| mNetworkInfo = new NetworkInfo(ConnectivityManager.TYPE_WIFI, 0, NETWORKTYPE, ""); |
| mBatteryStats = IBatteryStats.Stub.asInterface(ServiceManager.getService("batteryinfo")); |
| |
| IBinder b = ServiceManager.getService(Context.NETWORKMANAGEMENT_SERVICE); |
| nwService = INetworkManagementService.Stub.asInterface(b); |
| |
| mWifiMonitor = new WifiMonitor(this); |
| mDhcpInfo = new DhcpInfo(); |
| mWifiInfo = new WifiInfo(); |
| mInterfaceName = SystemProperties.get("wifi.interface", "tiwlan0"); |
| mSupplicantStateTracker = new SupplicantStateTracker(context, getHandler()); |
| |
| mBluetoothHeadset = new BluetoothHeadset(mContext, null); |
| mLinkProperties = new LinkProperties(); |
| |
| mNetworkInfo.setIsAvailable(false); |
| mLinkProperties.clear(); |
| mLastBssid = null; |
| mLastNetworkId = -1; |
| mLastSignalLevel = -1; |
| |
| mScanResultCache = new LinkedHashMap<String, ScanResult>( |
| SCAN_RESULT_CACHE_SIZE, 0.75f, true) { |
| /* |
| * Limit the cache size by SCAN_RESULT_CACHE_SIZE |
| * elements |
| */ |
| @Override |
| public boolean removeEldestEntry(Map.Entry eldest) { |
| return SCAN_RESULT_CACHE_SIZE < this.size(); |
| } |
| }; |
| |
| PowerManager powerManager = (PowerManager)mContext.getSystemService(Context.POWER_SERVICE); |
| sWakeLock = powerManager.newWakeLock(PowerManager.PARTIAL_WAKE_LOCK, TAG); |
| |
| addState(mDefaultState); |
| addState(mInitialState, mDefaultState); |
| addState(mDriverUnloadingState, mDefaultState); |
| addState(mDriverUnloadedState, mDefaultState); |
| addState(mDriverFailedState, mDriverUnloadedState); |
| addState(mDriverLoadingState, mDefaultState); |
| addState(mDriverLoadedState, mDefaultState); |
| addState(mWaitForSupState, mDriverLoadedState); |
| addState(mDriverSupReadyState, mDefaultState); |
| addState(mDriverStartingState, mDriverSupReadyState); |
| addState(mDriverStartedState, mDriverSupReadyState); |
| addState(mScanModeState, mDriverStartedState); |
| addState(mConnectModeState, mDriverStartedState); |
| addState(mConnectingState, mConnectModeState); |
| addState(mConnectedState, mConnectModeState); |
| addState(mDisconnectingState, mConnectModeState); |
| addState(mDisconnectedState, mConnectModeState); |
| addState(mDriverStoppingState, mDriverSupReadyState); |
| addState(mDriverStoppedState, mDriverSupReadyState); |
| addState(mSoftApStartedState, mDefaultState); |
| |
| setInitialState(mInitialState); |
| |
| if (DBG) setDbg(true); |
| |
| //start the state machine |
| start(); |
| } |
| |
| /********************************************************* |
| * Methods exposed for public use |
| ********************************************************/ |
| |
| /** |
| * TODO: doc |
| */ |
| public boolean syncPingSupplicant() { |
| return sendSyncMessage(CMD_PING_SUPPLICANT).boolValue; |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void startScan(boolean forceActive) { |
| sendMessage(obtainMessage(CMD_START_SCAN, forceActive ? |
| SCAN_ACTIVE : SCAN_PASSIVE, 0)); |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void setWifiEnabled(boolean enable) { |
| mLastEnableUid.set(Binder.getCallingUid()); |
| if (enable) { |
| /* Argument is the state that is entered prior to load */ |
| sendMessage(obtainMessage(CMD_LOAD_DRIVER, WIFI_STATE_ENABLING, 0)); |
| sendMessage(CMD_START_SUPPLICANT); |
| } else { |
| sendMessage(CMD_STOP_SUPPLICANT); |
| /* Argument is the state that is entered upon success */ |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_STATE_DISABLED, 0)); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void setWifiApEnabled(WifiConfiguration wifiConfig, boolean enable) { |
| mLastApEnableUid.set(Binder.getCallingUid()); |
| if (enable) { |
| /* Argument is the state that is entered prior to load */ |
| sendMessage(obtainMessage(CMD_LOAD_DRIVER, WIFI_AP_STATE_ENABLING, 0)); |
| sendMessage(obtainMessage(CMD_START_AP, wifiConfig)); |
| } else { |
| sendMessage(CMD_STOP_AP); |
| /* Argument is the state that is entered upon success */ |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_AP_STATE_DISABLED, 0)); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public int syncGetWifiState() { |
| return mWifiState.get(); |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public String syncGetWifiStateByName() { |
| switch (mWifiState.get()) { |
| case WIFI_STATE_DISABLING: |
| return "disabling"; |
| case WIFI_STATE_DISABLED: |
| return "disabled"; |
| case WIFI_STATE_ENABLING: |
| return "enabling"; |
| case WIFI_STATE_ENABLED: |
| return "enabled"; |
| case WIFI_STATE_UNKNOWN: |
| return "unknown state"; |
| default: |
| return "[invalid state]"; |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public int syncGetWifiApState() { |
| return mWifiApState.get(); |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public String syncGetWifiApStateByName() { |
| switch (mWifiApState.get()) { |
| case WIFI_AP_STATE_DISABLING: |
| return "disabling"; |
| case WIFI_AP_STATE_DISABLED: |
| return "disabled"; |
| case WIFI_AP_STATE_ENABLING: |
| return "enabling"; |
| case WIFI_AP_STATE_ENABLED: |
| return "enabled"; |
| case WIFI_AP_STATE_FAILED: |
| return "failed"; |
| default: |
| return "[invalid state]"; |
| } |
| } |
| |
| /** |
| * Get status information for the current connection, if any. |
| * @return a {@link WifiInfo} object containing information about the current connection |
| * |
| */ |
| public WifiInfo syncRequestConnectionInfo() { |
| return mWifiInfo; |
| } |
| |
| public DhcpInfo syncGetDhcpInfo() { |
| synchronized (mDhcpInfo) { |
| return new DhcpInfo(mDhcpInfo); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void setDriverStart(boolean enable) { |
| if (enable) { |
| sendMessage(CMD_START_DRIVER); |
| } else { |
| sendMessage(CMD_STOP_DRIVER); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void setScanOnlyMode(boolean enable) { |
| if (enable) { |
| sendMessage(obtainMessage(CMD_SET_SCAN_MODE, SCAN_ONLY_MODE, 0)); |
| } else { |
| sendMessage(obtainMessage(CMD_SET_SCAN_MODE, CONNECT_MODE, 0)); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void setScanType(boolean active) { |
| if (active) { |
| sendMessage(obtainMessage(CMD_SET_SCAN_TYPE, SCAN_ACTIVE, 0)); |
| } else { |
| sendMessage(obtainMessage(CMD_SET_SCAN_TYPE, SCAN_PASSIVE, 0)); |
| } |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public List<ScanResult> syncGetScanResultsList() { |
| return mScanResults; |
| } |
| |
| /** |
| * Disconnect from Access Point |
| */ |
| public void disconnectCommand() { |
| sendMessage(CMD_DISCONNECT); |
| } |
| |
| /** |
| * Initiate a reconnection to AP |
| */ |
| public void reconnectCommand() { |
| sendMessage(CMD_RECONNECT); |
| } |
| |
| /** |
| * Initiate a re-association to AP |
| */ |
| public void reassociateCommand() { |
| sendMessage(CMD_REASSOCIATE); |
| } |
| |
| /** |
| * Add a network synchronously |
| * |
| * @return network id of the new network |
| */ |
| public int syncAddOrUpdateNetwork(WifiConfiguration config) { |
| return sendSyncMessage(CMD_ADD_OR_UPDATE_NETWORK, config).intValue; |
| } |
| |
| public List<WifiConfiguration> syncGetConfiguredNetworks() { |
| return WifiConfigStore.getConfiguredNetworks(); |
| } |
| |
| /** |
| * Delete a network |
| * |
| * @param networkId id of the network to be removed |
| */ |
| public boolean syncRemoveNetwork(int networkId) { |
| return sendSyncMessage(obtainMessage(CMD_REMOVE_NETWORK, networkId, 0)).boolValue; |
| } |
| |
| private class EnableNetParams { |
| private int netId; |
| private boolean disableOthers; |
| EnableNetParams(int n, boolean b) { |
| netId = n; |
| disableOthers = b; |
| } |
| } |
| /** |
| * Enable a network |
| * |
| * @param netId network id of the network |
| * @param disableOthers true, if all other networks have to be disabled |
| * @return {@code true} if the operation succeeds, {@code false} otherwise |
| */ |
| public boolean syncEnableNetwork(int netId, boolean disableOthers) { |
| return sendSyncMessage(CMD_ENABLE_NETWORK, |
| new EnableNetParams(netId, disableOthers)).boolValue; |
| } |
| |
| /** |
| * Disable a network |
| * |
| * @param netId network id of the network |
| * @return {@code true} if the operation succeeds, {@code false} otherwise |
| */ |
| public boolean syncDisableNetwork(int netId) { |
| return sendSyncMessage(obtainMessage(CMD_DISABLE_NETWORK, netId, 0)).boolValue; |
| } |
| |
| /** |
| * Blacklist a BSSID. This will avoid the AP if there are |
| * alternate APs to connect |
| * |
| * @param bssid BSSID of the network |
| */ |
| public void addToBlacklist(String bssid) { |
| sendMessage(obtainMessage(CMD_BLACKLIST_NETWORK, bssid)); |
| } |
| |
| /** |
| * Clear the blacklist list |
| * |
| */ |
| public void clearBlacklist() { |
| sendMessage(obtainMessage(CMD_CLEAR_BLACKLIST)); |
| } |
| |
| public void connectNetwork(int netId) { |
| sendMessage(obtainMessage(CMD_CONNECT_NETWORK, netId, 0)); |
| } |
| |
| public void connectNetwork(WifiConfiguration wifiConfig) { |
| /* arg1 is used to indicate netId, force a netId value of -1 when |
| * we are passing a configuration since the default value of |
| * 0 is a valid netId |
| */ |
| sendMessage(obtainMessage(CMD_CONNECT_NETWORK, -1, 0, wifiConfig)); |
| } |
| |
| public void saveNetwork(WifiConfiguration wifiConfig) { |
| sendMessage(obtainMessage(CMD_SAVE_NETWORK, wifiConfig)); |
| } |
| |
| public void forgetNetwork(int netId) { |
| sendMessage(obtainMessage(CMD_FORGET_NETWORK, netId, 0)); |
| } |
| |
| public void startWpsPbc(String bssid) { |
| sendMessage(obtainMessage(CMD_START_WPS, bssid)); |
| } |
| |
| public void startWpsPin(String bssid, int apPin) { |
| sendMessage(obtainMessage(CMD_START_WPS, apPin, 0, bssid)); |
| } |
| |
| public void enableRssiPolling(boolean enabled) { |
| sendMessage(obtainMessage(CMD_ENABLE_RSSI_POLL, enabled ? 1 : 0, 0)); |
| } |
| /** |
| * Get RSSI to currently connected network |
| * |
| * @return RSSI value, -1 on failure |
| */ |
| public int syncGetRssi() { |
| return sendSyncMessage(CMD_GET_RSSI).intValue; |
| } |
| |
| /** |
| * Get approx RSSI to currently connected network |
| * |
| * @return RSSI value, -1 on failure |
| */ |
| public int syncGetRssiApprox() { |
| return sendSyncMessage(CMD_GET_RSSI_APPROX).intValue; |
| } |
| |
| /** |
| * Get link speed to currently connected network |
| * |
| * @return link speed, -1 on failure |
| */ |
| public int syncGetLinkSpeed() { |
| return sendSyncMessage(CMD_GET_LINK_SPEED).intValue; |
| } |
| |
| /** |
| * Get MAC address of radio |
| * |
| * @return MAC address, null on failure |
| */ |
| public String syncGetMacAddress() { |
| return sendSyncMessage(CMD_GET_MAC_ADDR).stringValue; |
| } |
| |
| /** |
| * Start packet filtering |
| */ |
| public void startPacketFiltering() { |
| sendMessage(CMD_START_PACKET_FILTERING); |
| } |
| |
| /** |
| * Stop packet filtering |
| */ |
| public void stopPacketFiltering() { |
| sendMessage(CMD_STOP_PACKET_FILTERING); |
| } |
| |
| /** |
| * Set power mode |
| * @param mode |
| * DRIVER_POWER_MODE_AUTO |
| * DRIVER_POWER_MODE_ACTIVE |
| */ |
| public void setPowerMode(int mode) { |
| sendMessage(obtainMessage(CMD_SET_POWER_MODE, mode, 0)); |
| } |
| |
| /** |
| * Set the number of allowed radio frequency channels from the system |
| * setting value, if any. |
| */ |
| public void setNumAllowedChannels() { |
| try { |
| setNumAllowedChannels( |
| Settings.Secure.getInt(mContext.getContentResolver(), |
| Settings.Secure.WIFI_NUM_ALLOWED_CHANNELS)); |
| } catch (Settings.SettingNotFoundException e) { |
| if (mNumAllowedChannels != 0) { |
| setNumAllowedChannels(mNumAllowedChannels); |
| } |
| // otherwise, use the driver default |
| } |
| } |
| |
| /** |
| * Set the number of radio frequency channels that are allowed to be used |
| * in the current regulatory domain. |
| * @param numChannels the number of allowed channels. Must be greater than 0 |
| * and less than or equal to 16. |
| */ |
| public void setNumAllowedChannels(int numChannels) { |
| sendMessage(obtainMessage(CMD_SET_NUM_ALLOWED_CHANNELS, numChannels, 0)); |
| } |
| |
| /** |
| * Get number of allowed channels |
| * |
| * @return channel count, -1 on failure |
| * |
| * TODO: this is not a public API and needs to be removed in favor |
| * of asynchronous reporting. unused for now. |
| */ |
| public int getNumAllowedChannels() { |
| return -1; |
| } |
| |
| /** |
| * Set bluetooth coex mode: |
| * |
| * @param mode |
| * BLUETOOTH_COEXISTENCE_MODE_ENABLED |
| * BLUETOOTH_COEXISTENCE_MODE_DISABLED |
| * BLUETOOTH_COEXISTENCE_MODE_SENSE |
| */ |
| public void setBluetoothCoexistenceMode(int mode) { |
| sendMessage(obtainMessage(CMD_SET_BLUETOOTH_COEXISTENCE, mode, 0)); |
| } |
| |
| /** |
| * Enable or disable Bluetooth coexistence scan mode. When this mode is on, |
| * some of the low-level scan parameters used by the driver are changed to |
| * reduce interference with A2DP streaming. |
| * |
| * @param isBluetoothPlaying whether to enable or disable this mode |
| */ |
| public void setBluetoothScanMode(boolean isBluetoothPlaying) { |
| sendMessage(obtainMessage(CMD_SET_BLUETOOTH_SCAN_MODE, isBluetoothPlaying ? 1 : 0, 0)); |
| } |
| |
| /** |
| * Save configuration on supplicant |
| * |
| * @return {@code true} if the operation succeeds, {@code false} otherwise |
| * |
| * TODO: deprecate this |
| */ |
| public boolean syncSaveConfig() { |
| return sendSyncMessage(CMD_SAVE_CONFIG).boolValue; |
| } |
| |
| /** |
| * TODO: doc |
| */ |
| public void requestCmWakeLock() { |
| sendMessage(CMD_REQUEST_CM_WAKELOCK); |
| } |
| |
| public void updateBatteryWorkSource(WorkSource newSource) { |
| synchronized (mRunningWifiUids) { |
| try { |
| if (newSource != null) { |
| mRunningWifiUids.set(newSource); |
| } |
| if (mIsRunning) { |
| if (mReportedRunning) { |
| // If the work source has changed since last time, need |
| // to remove old work from battery stats. |
| if (mLastRunningWifiUids.diff(mRunningWifiUids)) { |
| mBatteryStats.noteWifiRunningChanged(mLastRunningWifiUids, |
| mRunningWifiUids); |
| mLastRunningWifiUids.set(mRunningWifiUids); |
| } |
| } else { |
| // Now being started, report it. |
| mBatteryStats.noteWifiRunning(mRunningWifiUids); |
| mLastRunningWifiUids.set(mRunningWifiUids); |
| mReportedRunning = true; |
| } |
| } else { |
| if (mReportedRunning) { |
| // Last reported we were running, time to stop. |
| mBatteryStats.noteWifiStopped(mLastRunningWifiUids); |
| mLastRunningWifiUids.clear(); |
| mReportedRunning = false; |
| } |
| } |
| } catch (RemoteException ignore) { |
| } |
| } |
| } |
| |
| @Override |
| public String toString() { |
| StringBuffer sb = new StringBuffer(); |
| String LS = System.getProperty("line.separator"); |
| sb.append("current HSM state: ").append(getCurrentState().getName()).append(LS); |
| sb.append("mLinkProperties ").append(mLinkProperties).append(LS); |
| sb.append("mWifiInfo ").append(mWifiInfo).append(LS); |
| sb.append("mDhcpInfo ").append(mDhcpInfo).append(LS); |
| sb.append("mNetworkInfo ").append(mNetworkInfo).append(LS); |
| sb.append("mNumAllowedChannels ").append(mNumAllowedChannels).append(LS); |
| sb.append("mLastSignalLevel ").append(mLastSignalLevel).append(LS); |
| sb.append("mLastBssid ").append(mLastBssid).append(LS); |
| sb.append("mLastNetworkId ").append(mLastNetworkId).append(LS); |
| sb.append("mEnableAllNetworks ").append(mEnableAllNetworks).append(LS); |
| sb.append("mEnableRssiPolling ").append(mEnableRssiPolling).append(LS); |
| sb.append("mPasswordKeyMayBeIncorrect ").append(mPasswordKeyMayBeIncorrect).append(LS); |
| sb.append("mReconnectCount ").append(mReconnectCount).append(LS); |
| sb.append("mIsScanMode ").append(mIsScanMode).append(LS); |
| sb.append("Supplicant status").append(LS) |
| .append(WifiNative.statusCommand()).append(LS).append(LS); |
| |
| sb.append(WifiConfigStore.dump()); |
| return sb.toString(); |
| } |
| |
| /********************************************************* |
| * Internal private functions |
| ********************************************************/ |
| |
| class SyncReturn { |
| boolean boolValue; |
| int intValue; |
| String stringValue; |
| Object objValue; |
| } |
| |
| class SyncParams { |
| Object mParameter; |
| SyncReturn mSyncReturn; |
| SyncParams() { |
| mSyncReturn = new SyncReturn(); |
| } |
| SyncParams(Object p) { |
| mParameter = p; |
| mSyncReturn = new SyncReturn(); |
| } |
| } |
| |
| /** |
| * message.obj is used to store SyncParams |
| */ |
| private SyncReturn syncedSend(Message msg) { |
| SyncParams syncParams = (SyncParams) msg.obj; |
| synchronized(syncParams) { |
| if (DBG) Log.d(TAG, "syncedSend " + msg); |
| sendMessage(msg); |
| try { |
| syncParams.wait(); |
| } catch (InterruptedException e) { |
| Log.e(TAG, "sendSyncMessage: unexpected interruption of wait()"); |
| return null; |
| } |
| } |
| return syncParams.mSyncReturn; |
| } |
| |
| private SyncReturn sendSyncMessage(Message msg) { |
| SyncParams syncParams = new SyncParams(); |
| msg.obj = syncParams; |
| return syncedSend(msg); |
| } |
| |
| private SyncReturn sendSyncMessage(int what, Object param) { |
| SyncParams syncParams = new SyncParams(param); |
| Message msg = obtainMessage(what, syncParams); |
| return syncedSend(msg); |
| } |
| |
| |
| private SyncReturn sendSyncMessage(int what) { |
| return sendSyncMessage(obtainMessage(what)); |
| } |
| |
| private void notifyOnMsgObject(Message msg) { |
| SyncParams syncParams = (SyncParams) msg.obj; |
| if (syncParams != null) { |
| synchronized(syncParams) { |
| if (DBG) Log.d(TAG, "notifyOnMsgObject " + msg); |
| syncParams.notify(); |
| } |
| } |
| else { |
| Log.e(TAG, "Error! syncParams in notifyOnMsgObject is null"); |
| } |
| } |
| |
| private void setWifiState(int wifiState) { |
| final int previousWifiState = mWifiState.get(); |
| |
| try { |
| if (wifiState == WIFI_STATE_ENABLED) { |
| mBatteryStats.noteWifiOn(); |
| } else if (wifiState == WIFI_STATE_DISABLED) { |
| mBatteryStats.noteWifiOff(); |
| } |
| } catch (RemoteException e) { |
| Log.e(TAG, "Failed to note battery stats in wifi"); |
| } |
| |
| mWifiState.set(wifiState); |
| |
| if (DBG) Log.d(TAG, "setWifiState: " + syncGetWifiStateByName()); |
| |
| final Intent intent = new Intent(WifiManager.WIFI_STATE_CHANGED_ACTION); |
| intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT); |
| intent.putExtra(WifiManager.EXTRA_WIFI_STATE, wifiState); |
| intent.putExtra(WifiManager.EXTRA_PREVIOUS_WIFI_STATE, previousWifiState); |
| mContext.sendStickyBroadcast(intent); |
| } |
| |
| private void setWifiApState(int wifiApState) { |
| final int previousWifiApState = mWifiApState.get(); |
| |
| try { |
| if (wifiApState == WIFI_AP_STATE_ENABLED) { |
| mBatteryStats.noteWifiOn(); |
| } else if (wifiApState == WIFI_AP_STATE_DISABLED) { |
| mBatteryStats.noteWifiOff(); |
| } |
| } catch (RemoteException e) { |
| Log.d(TAG, "Failed to note battery stats in wifi"); |
| } |
| |
| // Update state |
| mWifiApState.set(wifiApState); |
| |
| if (DBG) Log.d(TAG, "setWifiApState: " + syncGetWifiApStateByName()); |
| |
| final Intent intent = new Intent(WifiManager.WIFI_AP_STATE_CHANGED_ACTION); |
| intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT); |
| intent.putExtra(WifiManager.EXTRA_WIFI_AP_STATE, wifiApState); |
| intent.putExtra(WifiManager.EXTRA_PREVIOUS_WIFI_AP_STATE, previousWifiApState); |
| mContext.sendStickyBroadcast(intent); |
| } |
| |
| /** |
| * Parse the scan result line passed to us by wpa_supplicant (helper). |
| * @param line the line to parse |
| * @return the {@link ScanResult} object |
| */ |
| private ScanResult parseScanResult(String line) { |
| ScanResult scanResult = null; |
| if (line != null) { |
| /* |
| * Cache implementation (LinkedHashMap) is not synchronized, thus, |
| * must synchronized here! |
| */ |
| synchronized (mScanResultCache) { |
| String[] result = scanResultPattern.split(line); |
| if (3 <= result.length && result.length <= 5) { |
| String bssid = result[0]; |
| // bssid | frequency | level | flags | ssid |
| int frequency; |
| int level; |
| try { |
| frequency = Integer.parseInt(result[1]); |
| level = Integer.parseInt(result[2]); |
| /* some implementations avoid negative values by adding 256 |
| * so we need to adjust for that here. |
| */ |
| if (level > 0) level -= 256; |
| } catch (NumberFormatException e) { |
| frequency = 0; |
| level = 0; |
| } |
| |
| /* |
| * The formatting of the results returned by |
| * wpa_supplicant is intended to make the fields |
| * line up nicely when printed, |
| * not to make them easy to parse. So we have to |
| * apply some heuristics to figure out which field |
| * is the SSID and which field is the flags. |
| */ |
| String ssid; |
| String flags; |
| if (result.length == 4) { |
| if (result[3].charAt(0) == '[') { |
| flags = result[3]; |
| ssid = ""; |
| } else { |
| flags = ""; |
| ssid = result[3]; |
| } |
| } else if (result.length == 5) { |
| flags = result[3]; |
| ssid = result[4]; |
| } else { |
| // Here, we must have 3 fields: no flags and ssid |
| // set |
| flags = ""; |
| ssid = ""; |
| } |
| |
| // bssid + ssid is the hash key |
| String key = bssid + ssid; |
| scanResult = mScanResultCache.get(key); |
| if (scanResult != null) { |
| scanResult.level = level; |
| scanResult.SSID = ssid; |
| scanResult.capabilities = flags; |
| scanResult.frequency = frequency; |
| } else { |
| // Do not add scan results that have no SSID set |
| if (0 < ssid.trim().length()) { |
| scanResult = |
| new ScanResult( |
| ssid, bssid, flags, level, frequency); |
| mScanResultCache.put(key, scanResult); |
| } |
| } |
| } else { |
| Log.w(TAG, "Misformatted scan result text with " + |
| result.length + " fields: " + line); |
| } |
| } |
| } |
| |
| return scanResult; |
| } |
| |
| /** |
| * scanResults input format |
| * 00:bb:cc:dd:cc:ee 2427 166 [WPA-EAP-TKIP][WPA2-EAP-CCMP] Net1 |
| * 00:bb:cc:dd:cc:ff 2412 165 [WPA-EAP-TKIP][WPA2-EAP-CCMP] Net2 |
| */ |
| private void setScanResults(String scanResults) { |
| if (scanResults == null) { |
| return; |
| } |
| |
| List<ScanResult> scanList = new ArrayList<ScanResult>(); |
| |
| int lineCount = 0; |
| |
| int scanResultsLen = scanResults.length(); |
| // Parse the result string, keeping in mind that the last line does |
| // not end with a newline. |
| for (int lineBeg = 0, lineEnd = 0; lineEnd <= scanResultsLen; ++lineEnd) { |
| if (lineEnd == scanResultsLen || scanResults.charAt(lineEnd) == '\n') { |
| ++lineCount; |
| |
| if (lineCount == 1) { |
| lineBeg = lineEnd + 1; |
| continue; |
| } |
| if (lineEnd > lineBeg) { |
| String line = scanResults.substring(lineBeg, lineEnd); |
| ScanResult scanResult = parseScanResult(line); |
| if (scanResult != null) { |
| scanList.add(scanResult); |
| } else { |
| Log.w(TAG, "misformatted scan result for: " + line); |
| } |
| } |
| lineBeg = lineEnd + 1; |
| } |
| } |
| |
| mScanResults = scanList; |
| } |
| |
| private String fetchSSID() { |
| String status = WifiNative.statusCommand(); |
| if (status == null) { |
| return null; |
| } |
| // extract ssid from a series of "name=value" |
| String[] lines = status.split("\n"); |
| for (String line : lines) { |
| String[] prop = line.split(" *= *"); |
| if (prop.length < 2) continue; |
| String name = prop[0]; |
| String value = prop[1]; |
| if (name.equalsIgnoreCase("ssid")) return value; |
| } |
| return null; |
| } |
| |
| private void configureLinkProperties() { |
| try { |
| mLinkProperties.setInterface(NetworkInterface.getByName(mInterfaceName)); |
| } catch (SocketException e) { |
| Log.e(TAG, "SocketException creating NetworkInterface from " + mInterfaceName + |
| ". e=" + e); |
| return; |
| } catch (NullPointerException e) { |
| Log.e(TAG, "NPE creating NetworkInterface. e=" + e); |
| return; |
| } |
| // TODO - fix this for v6 |
| synchronized (mDhcpInfo) { |
| mLinkProperties.addAddress(NetworkUtils.intToInetAddress(mDhcpInfo.ipAddress)); |
| mLinkProperties.setGateway(NetworkUtils.intToInetAddress(mDhcpInfo.gateway)); |
| mLinkProperties.addDns(NetworkUtils.intToInetAddress(mDhcpInfo.dns1)); |
| mLinkProperties.addDns(NetworkUtils.intToInetAddress(mDhcpInfo.dns2)); |
| } |
| // TODO - add proxy info |
| } |
| |
| private int getMaxDhcpRetries() { |
| return Settings.Secure.getInt(mContext.getContentResolver(), |
| Settings.Secure.WIFI_MAX_DHCP_RETRY_COUNT, |
| DEFAULT_MAX_DHCP_RETRIES); |
| } |
| |
| /** |
| * Whether to disable coexistence mode while obtaining IP address. This |
| * logic will return true only if the current bluetooth |
| * headset/handsfree state is disconnected. This means if it is in an |
| * error state, we will NOT disable coexistence mode to err on the side |
| * of safety. |
| * |
| * @return Whether to disable coexistence mode. |
| */ |
| private boolean shouldDisableCoexistenceMode() { |
| int state = mBluetoothHeadset.getState(mBluetoothHeadset.getCurrentHeadset()); |
| return state == BluetoothHeadset.STATE_DISCONNECTED; |
| } |
| |
| private void checkIsBluetoothPlaying() { |
| boolean isBluetoothPlaying = false; |
| Set<BluetoothDevice> connected = mBluetoothA2dp.getConnectedSinks(); |
| |
| for (BluetoothDevice device : connected) { |
| if (mBluetoothA2dp.getSinkState(device) == BluetoothA2dp.STATE_PLAYING) { |
| isBluetoothPlaying = true; |
| break; |
| } |
| } |
| setBluetoothScanMode(isBluetoothPlaying); |
| } |
| |
| private void sendScanResultsAvailableBroadcast() { |
| if (!ActivityManagerNative.isSystemReady()) return; |
| |
| mContext.sendBroadcast(new Intent(WifiManager.SCAN_RESULTS_AVAILABLE_ACTION)); |
| } |
| |
| private void sendRssiChangeBroadcast(final int newRssi) { |
| if (!ActivityManagerNative.isSystemReady()) return; |
| |
| Intent intent = new Intent(WifiManager.RSSI_CHANGED_ACTION); |
| intent.putExtra(WifiManager.EXTRA_NEW_RSSI, newRssi); |
| mContext.sendBroadcast(intent); |
| } |
| |
| private void sendNetworkStateChangeBroadcast(String bssid) { |
| Intent intent = new Intent(WifiManager.NETWORK_STATE_CHANGED_ACTION); |
| intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT |
| | Intent.FLAG_RECEIVER_REPLACE_PENDING); |
| intent.putExtra(WifiManager.EXTRA_NETWORK_INFO, mNetworkInfo); |
| intent.putExtra(WifiManager.EXTRA_LINK_PROPERTIES, mLinkProperties); |
| if (bssid != null) |
| intent.putExtra(WifiManager.EXTRA_BSSID, bssid); |
| mContext.sendStickyBroadcast(intent); |
| } |
| |
| /* TODO: Unused for now, will be used when ip change on connected network is handled */ |
| private void sendConfigChangeBroadcast() { |
| if (!ActivityManagerNative.isSystemReady()) return; |
| Intent intent = new Intent(WifiManager.CONFIG_CHANGED_ACTION); |
| intent.putExtra(WifiManager.EXTRA_LINK_PROPERTIES, mLinkProperties); |
| mContext.sendBroadcast(intent); |
| } |
| |
| private void sendSupplicantStateChangedBroadcast(StateChangeResult sc, boolean failedAuth) { |
| Intent intent = new Intent(WifiManager.SUPPLICANT_STATE_CHANGED_ACTION); |
| intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT |
| | Intent.FLAG_RECEIVER_REPLACE_PENDING); |
| intent.putExtra(WifiManager.EXTRA_NEW_STATE, (Parcelable)sc.state); |
| if (failedAuth) { |
| intent.putExtra( |
| WifiManager.EXTRA_SUPPLICANT_ERROR, |
| WifiManager.ERROR_AUTHENTICATING); |
| } |
| mContext.sendStickyBroadcast(intent); |
| } |
| |
| private void sendSupplicantConnectionChangedBroadcast(boolean connected) { |
| if (!ActivityManagerNative.isSystemReady()) return; |
| |
| Intent intent = new Intent(WifiManager.SUPPLICANT_CONNECTION_CHANGE_ACTION); |
| intent.putExtra(WifiManager.EXTRA_SUPPLICANT_CONNECTED, connected); |
| mContext.sendBroadcast(intent); |
| } |
| |
| /** |
| * Record the detailed state of a network. |
| * @param state the new @{code DetailedState} |
| */ |
| private void setDetailedState(NetworkInfo.DetailedState state) { |
| Log.d(TAG, "setDetailed state, old =" |
| + mNetworkInfo.getDetailedState() + " and new state=" + state); |
| if (state != mNetworkInfo.getDetailedState()) { |
| mNetworkInfo.setDetailedState(state, null, null); |
| } |
| } |
| |
| /** |
| * Poll for info not reported via events |
| * RSSI & Linkspeed |
| */ |
| private void requestPolledInfo() { |
| int newRssi = WifiNative.getRssiCommand(); |
| if (newRssi != -1 && -200 < newRssi && newRssi < 256) { // screen out invalid values |
| /* some implementations avoid negative values by adding 256 |
| * so we need to adjust for that here. |
| */ |
| if (newRssi > 0) newRssi -= 256; |
| mWifiInfo.setRssi(newRssi); |
| /* |
| * Rather then sending the raw RSSI out every time it |
| * changes, we precalculate the signal level that would |
| * be displayed in the status bar, and only send the |
| * broadcast if that much more coarse-grained number |
| * changes. This cuts down greatly on the number of |
| * broadcasts, at the cost of not mWifiInforming others |
| * interested in RSSI of all the changes in signal |
| * level. |
| */ |
| // TODO: The second arg to the call below needs to be a symbol somewhere, but |
| // it's actually the size of an array of icons that's private |
| // to StatusBar Policy. |
| int newSignalLevel = WifiManager.calculateSignalLevel(newRssi, 4); |
| if (newSignalLevel != mLastSignalLevel) { |
| sendRssiChangeBroadcast(newRssi); |
| } |
| mLastSignalLevel = newSignalLevel; |
| } else { |
| mWifiInfo.setRssi(-200); |
| } |
| int newLinkSpeed = WifiNative.getLinkSpeedCommand(); |
| if (newLinkSpeed != -1) { |
| mWifiInfo.setLinkSpeed(newLinkSpeed); |
| } |
| } |
| |
| /** |
| * Resets the Wi-Fi Connections by clearing any state, resetting any sockets |
| * using the interface, stopping DHCP & disabling interface |
| */ |
| private void handleNetworkDisconnect() { |
| Log.d(TAG, "Reset connections and stopping DHCP"); |
| |
| /* |
| * Reset connections & stop DHCP |
| */ |
| NetworkUtils.resetConnections(mInterfaceName); |
| |
| if (!NetworkUtils.stopDhcp(mInterfaceName)) { |
| Log.e(TAG, "Could not stop DHCP"); |
| } |
| |
| /* Disable interface */ |
| NetworkUtils.disableInterface(mInterfaceName); |
| |
| /* send event to CM & network change broadcast */ |
| setDetailedState(DetailedState.DISCONNECTED); |
| sendNetworkStateChangeBroadcast(mLastBssid); |
| |
| /* Reset data structures */ |
| mWifiInfo.setIpAddress(0); |
| mWifiInfo.setBSSID(null); |
| mWifiInfo.setSSID(null); |
| mWifiInfo.setNetworkId(-1); |
| |
| /* Clear network properties */ |
| mLinkProperties.clear(); |
| |
| mLastBssid= null; |
| mLastNetworkId = -1; |
| |
| } |
| |
| |
| /********************************************************* |
| * Notifications from WifiMonitor |
| ********************************************************/ |
| |
| /** |
| * A structure for supplying information about a supplicant state |
| * change in the STATE_CHANGE event message that comes from the |
| * WifiMonitor |
| * thread. |
| */ |
| private static class StateChangeResult { |
| StateChangeResult(int networkId, String BSSID, Object state) { |
| this.state = state; |
| this.BSSID = BSSID; |
| this.networkId = networkId; |
| } |
| int networkId; |
| String BSSID; |
| Object state; |
| } |
| |
| /** |
| * Send the tracker a notification that a user-entered password key |
| * may be incorrect (i.e., caused authentication to fail). |
| */ |
| void notifyPasswordKeyMayBeIncorrect() { |
| sendMessage(PASSWORD_MAY_BE_INCORRECT_EVENT); |
| } |
| |
| /** |
| * Send the tracker a notification that a connection to the supplicant |
| * daemon has been established. |
| */ |
| void notifySupplicantConnection() { |
| sendMessage(SUP_CONNECTION_EVENT); |
| } |
| |
| /** |
| * Send the tracker a notification that a connection to the supplicant |
| * daemon has been established. |
| */ |
| void notifySupplicantLost() { |
| sendMessage(SUP_DISCONNECTION_EVENT); |
| } |
| |
| /** |
| * Send the tracker a notification that the state of Wifi connectivity |
| * has changed. |
| * @param networkId the configured network on which the state change occurred |
| * @param newState the new network state |
| * @param BSSID when the new state is {@link DetailedState#CONNECTED |
| * NetworkInfo.DetailedState.CONNECTED}, |
| * this is the MAC address of the access point. Otherwise, it |
| * is {@code null}. |
| */ |
| void notifyNetworkStateChange(DetailedState newState, String BSSID, int networkId) { |
| if (newState == NetworkInfo.DetailedState.CONNECTED) { |
| sendMessage(obtainMessage(NETWORK_CONNECTION_EVENT, |
| new StateChangeResult(networkId, BSSID, newState))); |
| } else { |
| sendMessage(obtainMessage(NETWORK_DISCONNECTION_EVENT, |
| new StateChangeResult(networkId, BSSID, newState))); |
| } |
| } |
| |
| /** |
| * Send the tracker a notification that the state of the supplicant |
| * has changed. |
| * @param networkId the configured network on which the state change occurred |
| * @param newState the new {@code SupplicantState} |
| */ |
| void notifySupplicantStateChange(int networkId, String BSSID, SupplicantState newState) { |
| sendMessage(obtainMessage(SUPPLICANT_STATE_CHANGE_EVENT, |
| new StateChangeResult(networkId, BSSID, newState))); |
| } |
| |
| /** |
| * Send the tracker a notification that a scan has completed, and results |
| * are available. |
| */ |
| void notifyScanResultsAvailable() { |
| /** |
| * Switch scan mode over to passive. |
| * Turning off scan-only mode happens only in "Connect" mode |
| */ |
| setScanType(false); |
| sendMessage(SCAN_RESULTS_EVENT); |
| } |
| |
| void notifyDriverStarted() { |
| sendMessage(DRIVER_START_EVENT); |
| } |
| |
| void notifyDriverStopped() { |
| sendMessage(DRIVER_STOP_EVENT); |
| } |
| |
| void notifyDriverHung() { |
| setWifiEnabled(false); |
| setWifiEnabled(true); |
| } |
| |
| |
| /******************************************************** |
| * HSM states |
| *******************************************************/ |
| |
| class DefaultState extends HierarchicalState { |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| SyncParams syncParams; |
| switch (message.what) { |
| /* Synchronous call returns */ |
| case CMD_PING_SUPPLICANT: |
| case CMD_REMOVE_NETWORK: |
| case CMD_ENABLE_NETWORK: |
| case CMD_DISABLE_NETWORK: |
| case CMD_ADD_OR_UPDATE_NETWORK: |
| case CMD_GET_RSSI: |
| case CMD_GET_RSSI_APPROX: |
| case CMD_GET_LINK_SPEED: |
| case CMD_GET_MAC_ADDR: |
| case CMD_SAVE_CONFIG: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.boolValue = false; |
| syncParams.mSyncReturn.intValue = -1; |
| syncParams.mSyncReturn.stringValue = null; |
| notifyOnMsgObject(message); |
| break; |
| case CMD_ENABLE_RSSI_POLL: |
| mEnableRssiPolling = (message.arg1 == 1); |
| mSupplicantStateTracker.sendMessage(CMD_ENABLE_RSSI_POLL); |
| break; |
| /* Discard */ |
| case CMD_LOAD_DRIVER: |
| case CMD_UNLOAD_DRIVER: |
| case CMD_START_SUPPLICANT: |
| case CMD_STOP_SUPPLICANT: |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case CMD_START_AP: |
| case CMD_STOP_AP: |
| case CMD_START_SCAN: |
| case CMD_DISCONNECT: |
| case CMD_RECONNECT: |
| case CMD_REASSOCIATE: |
| case CMD_RECONFIGURE_IP: |
| case SUP_CONNECTION_EVENT: |
| case SUP_DISCONNECTION_EVENT: |
| case DRIVER_START_EVENT: |
| case DRIVER_STOP_EVENT: |
| case NETWORK_CONNECTION_EVENT: |
| case NETWORK_DISCONNECTION_EVENT: |
| case SCAN_RESULTS_EVENT: |
| case SUPPLICANT_STATE_CHANGE_EVENT: |
| case PASSWORD_MAY_BE_INCORRECT_EVENT: |
| case CMD_BLACKLIST_NETWORK: |
| case CMD_CLEAR_BLACKLIST: |
| case CMD_SET_SCAN_MODE: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_REQUEST_CM_WAKELOCK: |
| case CMD_CONNECT_NETWORK: |
| case CMD_SAVE_NETWORK: |
| case CMD_FORGET_NETWORK: |
| case CMD_START_WPS: |
| break; |
| default: |
| Log.e(TAG, "Error! unhandled message" + message); |
| break; |
| } |
| return HANDLED; |
| } |
| } |
| |
| class InitialState extends HierarchicalState { |
| @Override |
| //TODO: could move logging into a common class |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| // [31-8] Reserved for future use |
| // [7 - 0] HSM state change |
| // 50021 wifi_state_changed (custom|1|5) |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| |
| if (WifiNative.isDriverLoaded()) { |
| transitionTo(mDriverLoadedState); |
| } |
| else { |
| transitionTo(mDriverUnloadedState); |
| } |
| } |
| } |
| |
| class DriverLoadingState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| |
| final Message message = new Message(); |
| message.copyFrom(getCurrentMessage()); |
| /* TODO: add a timeout to fail when driver load is hung. |
| * Similarly for driver unload. |
| */ |
| new Thread(new Runnable() { |
| public void run() { |
| sWakeLock.acquire(); |
| //enabling state |
| switch(message.arg1) { |
| case WIFI_STATE_ENABLING: |
| setWifiState(WIFI_STATE_ENABLING); |
| break; |
| case WIFI_AP_STATE_ENABLING: |
| setWifiApState(WIFI_AP_STATE_ENABLING); |
| break; |
| } |
| |
| if(WifiNative.loadDriver()) { |
| Log.d(TAG, "Driver load successful"); |
| sendMessage(CMD_LOAD_DRIVER_SUCCESS); |
| } else { |
| Log.e(TAG, "Failed to load driver!"); |
| switch(message.arg1) { |
| case WIFI_STATE_ENABLING: |
| setWifiState(WIFI_STATE_UNKNOWN); |
| break; |
| case WIFI_AP_STATE_ENABLING: |
| setWifiApState(WIFI_AP_STATE_FAILED); |
| break; |
| } |
| sendMessage(CMD_LOAD_DRIVER_FAILURE); |
| } |
| sWakeLock.release(); |
| } |
| }).start(); |
| } |
| |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_LOAD_DRIVER_SUCCESS: |
| transitionTo(mDriverLoadedState); |
| break; |
| case CMD_LOAD_DRIVER_FAILURE: |
| transitionTo(mDriverFailedState); |
| break; |
| case CMD_LOAD_DRIVER: |
| case CMD_UNLOAD_DRIVER: |
| case CMD_START_SUPPLICANT: |
| case CMD_STOP_SUPPLICANT: |
| case CMD_START_AP: |
| case CMD_STOP_AP: |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case CMD_SET_SCAN_MODE: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_START_PACKET_FILTERING: |
| case CMD_STOP_PACKET_FILTERING: |
| deferMessage(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverLoadedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch(message.what) { |
| case CMD_UNLOAD_DRIVER: |
| transitionTo(mDriverUnloadingState); |
| break; |
| case CMD_START_SUPPLICANT: |
| if(WifiNative.startSupplicant()) { |
| Log.d(TAG, "Supplicant start successful"); |
| mWifiMonitor.startMonitoring(); |
| setWifiState(WIFI_STATE_ENABLED); |
| transitionTo(mWaitForSupState); |
| } else { |
| Log.e(TAG, "Failed to start supplicant!"); |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_STATE_UNKNOWN, 0)); |
| } |
| break; |
| case CMD_START_AP: |
| try { |
| nwService.startAccessPoint((WifiConfiguration) message.obj, |
| mInterfaceName, |
| SOFTAP_IFACE); |
| } catch(Exception e) { |
| Log.e(TAG, "Exception in startAccessPoint()"); |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_AP_STATE_FAILED, 0)); |
| break; |
| } |
| Log.d(TAG, "Soft AP start successful"); |
| setWifiApState(WIFI_AP_STATE_ENABLED); |
| transitionTo(mSoftApStartedState); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverUnloadingState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| |
| final Message message = new Message(); |
| message.copyFrom(getCurrentMessage()); |
| new Thread(new Runnable() { |
| public void run() { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| sWakeLock.acquire(); |
| if(WifiNative.unloadDriver()) { |
| Log.d(TAG, "Driver unload successful"); |
| sendMessage(CMD_UNLOAD_DRIVER_SUCCESS); |
| |
| switch(message.arg1) { |
| case WIFI_STATE_DISABLED: |
| case WIFI_STATE_UNKNOWN: |
| setWifiState(message.arg1); |
| break; |
| case WIFI_AP_STATE_DISABLED: |
| case WIFI_AP_STATE_FAILED: |
| setWifiApState(message.arg1); |
| break; |
| } |
| } else { |
| Log.e(TAG, "Failed to unload driver!"); |
| sendMessage(CMD_UNLOAD_DRIVER_FAILURE); |
| |
| switch(message.arg1) { |
| case WIFI_STATE_DISABLED: |
| case WIFI_STATE_UNKNOWN: |
| setWifiState(WIFI_STATE_UNKNOWN); |
| break; |
| case WIFI_AP_STATE_DISABLED: |
| case WIFI_AP_STATE_FAILED: |
| setWifiApState(WIFI_AP_STATE_FAILED); |
| break; |
| } |
| } |
| sWakeLock.release(); |
| } |
| }).start(); |
| } |
| |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_UNLOAD_DRIVER_SUCCESS: |
| transitionTo(mDriverUnloadedState); |
| break; |
| case CMD_UNLOAD_DRIVER_FAILURE: |
| transitionTo(mDriverFailedState); |
| break; |
| case CMD_LOAD_DRIVER: |
| case CMD_UNLOAD_DRIVER: |
| case CMD_START_SUPPLICANT: |
| case CMD_STOP_SUPPLICANT: |
| case CMD_START_AP: |
| case CMD_STOP_AP: |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case CMD_SET_SCAN_MODE: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_START_PACKET_FILTERING: |
| case CMD_STOP_PACKET_FILTERING: |
| deferMessage(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverUnloadedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_LOAD_DRIVER: |
| transitionTo(mDriverLoadingState); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverFailedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| Log.e(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| return NOT_HANDLED; |
| } |
| } |
| |
| |
| class WaitForSupState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch(message.what) { |
| case SUP_CONNECTION_EVENT: |
| Log.d(TAG, "Supplicant connection established"); |
| mSupplicantStateTracker.resetSupplicantState(); |
| /* Initialize data structures */ |
| mLastBssid = null; |
| mLastNetworkId = -1; |
| mLastSignalLevel = -1; |
| |
| mWifiInfo.setMacAddress(WifiNative.getMacAddressCommand()); |
| |
| WifiConfigStore.initialize(mContext); |
| |
| //TODO: initialize and fix multicast filtering |
| //mWM.initializeMulticastFiltering(); |
| |
| if (mBluetoothA2dp == null) { |
| mBluetoothA2dp = new BluetoothA2dp(mContext); |
| } |
| checkIsBluetoothPlaying(); |
| |
| sendSupplicantConnectionChangedBroadcast(true); |
| transitionTo(mDriverSupReadyState); |
| break; |
| case CMD_STOP_SUPPLICANT: |
| Log.d(TAG, "Stop supplicant received"); |
| WifiNative.stopSupplicant(); |
| transitionTo(mDriverLoadedState); |
| break; |
| /* Fail soft ap when waiting for supplicant start */ |
| case CMD_START_AP: |
| Log.d(TAG, "Failed to start soft AP with a running supplicant"); |
| setWifiApState(WIFI_AP_STATE_FAILED); |
| break; |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case CMD_SET_SCAN_MODE: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_START_PACKET_FILTERING: |
| case CMD_STOP_PACKET_FILTERING: |
| deferMessage(message); |
| break; |
| case CMD_STOP_AP: |
| case CMD_START_SUPPLICANT: |
| case CMD_UNLOAD_DRIVER: |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverSupReadyState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| /* Initialize for connect mode operation at start */ |
| mIsScanMode = false; |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| SyncParams syncParams; |
| WifiConfiguration config; |
| switch(message.what) { |
| case CMD_STOP_SUPPLICANT: /* Supplicant stopped by user */ |
| Log.d(TAG, "Stop supplicant received"); |
| WifiNative.stopSupplicant(); |
| //$FALL-THROUGH$ |
| case SUP_DISCONNECTION_EVENT: /* Supplicant died */ |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| WifiNative.closeSupplicantConnection(); |
| handleNetworkDisconnect(); |
| sendSupplicantConnectionChangedBroadcast(false); |
| mSupplicantStateTracker.resetSupplicantState(); |
| transitionTo(mDriverLoadedState); |
| |
| /* When supplicant dies, unload driver and enter failed state */ |
| //TODO: consider bringing up supplicant again |
| if (message.what == SUP_DISCONNECTION_EVENT) { |
| Log.d(TAG, "Supplicant died, unloading driver"); |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_STATE_UNKNOWN, 0)); |
| } |
| break; |
| case CMD_START_DRIVER: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| WifiNative.startDriverCommand(); |
| transitionTo(mDriverStartingState); |
| break; |
| case SCAN_RESULTS_EVENT: |
| setScanResults(WifiNative.scanResultsCommand()); |
| sendScanResultsAvailableBroadcast(); |
| break; |
| case CMD_PING_SUPPLICANT: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.boolValue = WifiNative.pingCommand(); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_ADD_OR_UPDATE_NETWORK: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| syncParams = (SyncParams) message.obj; |
| config = (WifiConfiguration) syncParams.mParameter; |
| syncParams.mSyncReturn.intValue = WifiConfigStore.addOrUpdateNetwork(config); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_REMOVE_NETWORK: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.boolValue = WifiConfigStore.removeNetwork( |
| message.arg1); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_ENABLE_NETWORK: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| syncParams = (SyncParams) message.obj; |
| EnableNetParams enableNetParams = (EnableNetParams) syncParams.mParameter; |
| syncParams.mSyncReturn.boolValue = WifiConfigStore.enableNetwork( |
| enableNetParams.netId, enableNetParams.disableOthers); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_DISABLE_NETWORK: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.boolValue = WifiConfigStore.disableNetwork( |
| message.arg1); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_BLACKLIST_NETWORK: |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| WifiNative.addToBlacklistCommand((String)message.obj); |
| break; |
| case CMD_CLEAR_BLACKLIST: |
| WifiNative.clearBlacklistCommand(); |
| break; |
| case CMD_SAVE_CONFIG: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.boolValue = WifiConfigStore.saveConfig(); |
| notifyOnMsgObject(message); |
| // Inform the backup manager about a data change |
| IBackupManager ibm = IBackupManager.Stub.asInterface( |
| ServiceManager.getService(Context.BACKUP_SERVICE)); |
| if (ibm != null) { |
| try { |
| ibm.dataChanged("com.android.providers.settings"); |
| } catch (Exception e) { |
| // Try again later |
| } |
| } |
| break; |
| case CMD_GET_MAC_ADDR: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.stringValue = WifiNative.getMacAddressCommand(); |
| notifyOnMsgObject(message); |
| break; |
| /* Cannot start soft AP while in client mode */ |
| case CMD_START_AP: |
| Log.d(TAG, "Failed to start soft AP with a running supplicant"); |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| setWifiApState(WIFI_AP_STATE_FAILED); |
| break; |
| case CMD_SET_SCAN_MODE: |
| mIsScanMode = (message.arg1 == SCAN_ONLY_MODE); |
| break; |
| case CMD_SAVE_NETWORK: |
| config = (WifiConfiguration) message.obj; |
| WifiConfigStore.saveNetwork(config); |
| break; |
| case CMD_FORGET_NETWORK: |
| WifiConfigStore.forgetNetwork(message.arg1); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| return HANDLED; |
| } |
| } |
| |
| class DriverStartingState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch(message.what) { |
| case DRIVER_START_EVENT: |
| transitionTo(mDriverStartedState); |
| break; |
| /* Queue driver commands & connection events */ |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case SUPPLICANT_STATE_CHANGE_EVENT: |
| case NETWORK_CONNECTION_EVENT: |
| case NETWORK_DISCONNECTION_EVENT: |
| case PASSWORD_MAY_BE_INCORRECT_EVENT: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_START_PACKET_FILTERING: |
| case CMD_STOP_PACKET_FILTERING: |
| case CMD_START_SCAN: |
| case CMD_DISCONNECT: |
| case CMD_REASSOCIATE: |
| case CMD_RECONNECT: |
| deferMessage(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverStartedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| |
| mIsRunning = true; |
| updateBatteryWorkSource(null); |
| |
| /* Initialize channel count */ |
| setNumAllowedChannels(); |
| /* |
| * STOPSHIP |
| * TODO: We are having 11A issues that Broadcom is looking |
| * to resolve, this is a temporary fix to allow only 11B/G |
| * and help improve GoogleGuest connectivity |
| * We also need to add the UI for band control |
| */ |
| WifiNative.setBandCommand(BAND_2G); |
| |
| if (mIsScanMode) { |
| WifiNative.setScanResultHandlingCommand(SCAN_ONLY_MODE); |
| WifiNative.disconnectCommand(); |
| transitionTo(mScanModeState); |
| } else { |
| WifiNative.setScanResultHandlingCommand(CONNECT_MODE); |
| /* If supplicant has already connected, before we could finish establishing |
| * the control channel connection, we miss all the supplicant events. |
| * Disconnect and reconnect when driver has started to ensure we receive |
| * all supplicant events. |
| * |
| * TODO: This is a bit unclean, ideally the supplicant should never |
| * connect until told to do so by the framework |
| */ |
| WifiNative.disconnectCommand(); |
| WifiNative.reconnectCommand(); |
| transitionTo(mConnectModeState); |
| } |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| SyncParams syncParams; |
| switch(message.what) { |
| case CMD_SET_SCAN_TYPE: |
| if (message.arg1 == SCAN_ACTIVE) { |
| WifiNative.setScanModeCommand(true); |
| } else { |
| WifiNative.setScanModeCommand(false); |
| } |
| break; |
| case CMD_SET_POWER_MODE: |
| WifiNative.setPowerModeCommand(message.arg1); |
| break; |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| WifiNative.setBluetoothCoexistenceModeCommand(message.arg1); |
| break; |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| WifiNative.setBluetoothCoexistenceScanModeCommand(message.arg1 == 1); |
| break; |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| mNumAllowedChannels = message.arg1; |
| WifiNative.setNumAllowedChannelsCommand(message.arg1); |
| break; |
| case CMD_START_DRIVER: |
| /* Ignore another driver start */ |
| break; |
| case CMD_STOP_DRIVER: |
| WifiNative.stopDriverCommand(); |
| transitionTo(mDriverStoppingState); |
| break; |
| case CMD_REQUEST_CM_WAKELOCK: |
| if (mCm == null) { |
| mCm = (ConnectivityManager)mContext.getSystemService( |
| Context.CONNECTIVITY_SERVICE); |
| } |
| mCm.requestNetworkTransitionWakelock(TAG); |
| break; |
| case CMD_START_PACKET_FILTERING: |
| WifiNative.startPacketFiltering(); |
| break; |
| case CMD_STOP_PACKET_FILTERING: |
| WifiNative.stopPacketFiltering(); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| @Override |
| public void exit() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| mIsRunning = false; |
| updateBatteryWorkSource(null); |
| mScanResults = null; |
| } |
| } |
| |
| class DriverStoppingState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch(message.what) { |
| case DRIVER_STOP_EVENT: |
| transitionTo(mDriverStoppedState); |
| break; |
| /* Queue driver commands */ |
| case CMD_START_DRIVER: |
| case CMD_STOP_DRIVER: |
| case CMD_SET_SCAN_TYPE: |
| case CMD_SET_POWER_MODE: |
| case CMD_SET_BLUETOOTH_COEXISTENCE: |
| case CMD_SET_BLUETOOTH_SCAN_MODE: |
| case CMD_SET_NUM_ALLOWED_CHANNELS: |
| case CMD_START_PACKET_FILTERING: |
| case CMD_STOP_PACKET_FILTERING: |
| case CMD_START_SCAN: |
| case CMD_DISCONNECT: |
| case CMD_REASSOCIATE: |
| case CMD_RECONNECT: |
| deferMessage(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DriverStoppedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| return NOT_HANDLED; |
| } |
| } |
| |
| class ScanModeState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| SyncParams syncParams; |
| switch(message.what) { |
| case CMD_SET_SCAN_MODE: |
| if (message.arg1 == SCAN_ONLY_MODE) { |
| /* Ignore */ |
| return HANDLED; |
| } else { |
| WifiNative.setScanResultHandlingCommand(message.arg1); |
| WifiNative.reconnectCommand(); |
| mIsScanMode = false; |
| transitionTo(mDisconnectedState); |
| } |
| break; |
| case CMD_START_SCAN: |
| WifiNative.scanCommand(message.arg1 == SCAN_ACTIVE); |
| break; |
| /* Ignore */ |
| case CMD_DISCONNECT: |
| case CMD_RECONNECT: |
| case CMD_REASSOCIATE: |
| case SUPPLICANT_STATE_CHANGE_EVENT: |
| case NETWORK_CONNECTION_EVENT: |
| case NETWORK_DISCONNECTION_EVENT: |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class ConnectModeState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| SyncParams syncParams; |
| StateChangeResult stateChangeResult; |
| switch(message.what) { |
| case PASSWORD_MAY_BE_INCORRECT_EVENT: |
| mPasswordKeyMayBeIncorrect = true; |
| break; |
| case SUPPLICANT_STATE_CHANGE_EVENT: |
| stateChangeResult = (StateChangeResult) message.obj; |
| mSupplicantStateTracker.handleEvent(stateChangeResult); |
| break; |
| case CMD_START_SCAN: |
| /* We need to set scan type in completed state */ |
| Message newMsg = obtainMessage(); |
| newMsg.copyFrom(message); |
| mSupplicantStateTracker.sendMessage(newMsg); |
| break; |
| /* Do a redundant disconnect without transition */ |
| case CMD_DISCONNECT: |
| WifiNative.disconnectCommand(); |
| break; |
| case CMD_RECONNECT: |
| WifiNative.reconnectCommand(); |
| break; |
| case CMD_REASSOCIATE: |
| WifiNative.reassociateCommand(); |
| break; |
| case CMD_CONNECT_NETWORK: |
| int netId = message.arg1; |
| WifiConfiguration config = (WifiConfiguration) message.obj; |
| |
| /* We connect to a specific network by issuing a select |
| * to the WifiConfigStore. This enables the network, |
| * while disabling all other networks in the supplicant. |
| * Disabling a connected network will cause a disconnection |
| * from the network. A reconnectCommand() will then initiate |
| * a connection to the enabled network. |
| */ |
| if (config != null) { |
| WifiConfigStore.selectNetwork(config); |
| } else { |
| WifiConfigStore.selectNetwork(netId); |
| } |
| |
| /* Save a flag to indicate that we need to enable all |
| * networks after supplicant indicates a network |
| * state change event |
| */ |
| mEnableAllNetworks = true; |
| |
| WifiNative.reconnectCommand(); |
| |
| /* Expect a disconnection from the old connection */ |
| transitionTo(mDisconnectingState); |
| break; |
| case CMD_START_WPS: |
| String bssid = (String) message.obj; |
| int apPin = message.arg1; |
| boolean success; |
| if (apPin != 0) { |
| /* WPS pin method configuration */ |
| success = WifiConfigStore.startWpsPin(bssid, apPin); |
| } else { |
| /* WPS push button configuration */ |
| success = WifiConfigStore.startWpsPbc(bssid); |
| } |
| /* During WPS setup, all other networks are disabled. After |
| * a successful connect a new config is created in the supplicant. |
| * |
| * We need to enable all networks after a successful connection |
| * or when supplicant goes inactive due to failure. Enabling all |
| * networks after a disconnect is observed as done with connectNetwork |
| * does not lead to a successful WPS setup. |
| * |
| * Upon success, the configuration list needs to be reloaded |
| */ |
| if (success) { |
| mWpsStarted = true; |
| /* Expect a disconnection from the old connection */ |
| transitionTo(mDisconnectingState); |
| } |
| break; |
| case SCAN_RESULTS_EVENT: |
| /* Set the scan setting back to "connect" mode */ |
| WifiNative.setScanResultHandlingCommand(CONNECT_MODE); |
| /* Handle scan results */ |
| return NOT_HANDLED; |
| case NETWORK_CONNECTION_EVENT: |
| Log.d(TAG,"Network connection established"); |
| stateChangeResult = (StateChangeResult) message.obj; |
| |
| //TODO: make supplicant modification to push this in events |
| mWifiInfo.setSSID(fetchSSID()); |
| mWifiInfo.setBSSID(mLastBssid = stateChangeResult.BSSID); |
| mWifiInfo.setNetworkId(stateChangeResult.networkId); |
| mLastNetworkId = stateChangeResult.networkId; |
| /* send event to CM & network change broadcast */ |
| setDetailedState(DetailedState.OBTAINING_IPADDR); |
| sendNetworkStateChangeBroadcast(mLastBssid); |
| transitionTo(mConnectingState); |
| break; |
| case NETWORK_DISCONNECTION_EVENT: |
| Log.d(TAG,"Network connection lost"); |
| handleNetworkDisconnect(); |
| transitionTo(mDisconnectedState); |
| break; |
| case CMD_GET_RSSI: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.intValue = WifiNative.getRssiCommand(); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_GET_RSSI_APPROX: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.intValue = WifiNative.getRssiApproxCommand(); |
| notifyOnMsgObject(message); |
| break; |
| case CMD_GET_LINK_SPEED: |
| syncParams = (SyncParams) message.obj; |
| syncParams.mSyncReturn.intValue = WifiNative.getLinkSpeedCommand(); |
| notifyOnMsgObject(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class ConnectingState extends HierarchicalState { |
| boolean mModifiedBluetoothCoexistenceMode; |
| int mPowerMode; |
| boolean mUseStaticIp; |
| Thread mDhcpThread; |
| |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| |
| mUseStaticIp = WifiConfigStore.isUsingStaticIp(mLastNetworkId); |
| if (!mUseStaticIp) { |
| mDhcpThread = null; |
| mModifiedBluetoothCoexistenceMode = false; |
| mPowerMode = DRIVER_POWER_MODE_AUTO; |
| |
| if (shouldDisableCoexistenceMode()) { |
| /* |
| * There are problems setting the Wi-Fi driver's power |
| * mode to active when bluetooth coexistence mode is |
| * enabled or sense. |
| * <p> |
| * We set Wi-Fi to active mode when |
| * obtaining an IP address because we've found |
| * compatibility issues with some routers with low power |
| * mode. |
| * <p> |
| * In order for this active power mode to properly be set, |
| * we disable coexistence mode until we're done with |
| * obtaining an IP address. One exception is if we |
| * are currently connected to a headset, since disabling |
| * coexistence would interrupt that connection. |
| */ |
| mModifiedBluetoothCoexistenceMode = true; |
| |
| // Disable the coexistence mode |
| WifiNative.setBluetoothCoexistenceModeCommand( |
| WifiNative.BLUETOOTH_COEXISTENCE_MODE_DISABLED); |
| } |
| |
| mPowerMode = WifiNative.getPowerModeCommand(); |
| if (mPowerMode < 0) { |
| // Handle the case where supplicant driver does not support |
| // getPowerModeCommand. |
| mPowerMode = DRIVER_POWER_MODE_AUTO; |
| } |
| if (mPowerMode != DRIVER_POWER_MODE_ACTIVE) { |
| WifiNative.setPowerModeCommand(DRIVER_POWER_MODE_ACTIVE); |
| } |
| |
| Log.d(TAG, "DHCP request started"); |
| mDhcpThread = new Thread(new Runnable() { |
| public void run() { |
| DhcpInfo dhcpInfo = new DhcpInfo(); |
| if (NetworkUtils.runDhcp(mInterfaceName, dhcpInfo)) { |
| Log.d(TAG, "DHCP request succeeded"); |
| synchronized (mDhcpInfo) { |
| mDhcpInfo = dhcpInfo; |
| } |
| sendMessage(CMD_IP_CONFIG_SUCCESS); |
| } else { |
| Log.d(TAG, "DHCP request failed: " + |
| NetworkUtils.getDhcpError()); |
| sendMessage(CMD_IP_CONFIG_FAILURE); |
| } |
| } |
| }); |
| mDhcpThread.start(); |
| } else { |
| DhcpInfo dhcpInfo = WifiConfigStore.getIpConfiguration(mLastNetworkId); |
| if (NetworkUtils.configureInterface(mInterfaceName, dhcpInfo)) { |
| Log.v(TAG, "Static IP configuration succeeded"); |
| synchronized (mDhcpInfo) { |
| mDhcpInfo = dhcpInfo; |
| } |
| sendMessage(CMD_IP_CONFIG_SUCCESS); |
| } else { |
| Log.v(TAG, "Static IP configuration failed"); |
| sendMessage(CMD_IP_CONFIG_FAILURE); |
| } |
| } |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| |
| switch(message.what) { |
| case CMD_IP_CONFIG_SUCCESS: |
| mReconnectCount = 0; |
| mLastSignalLevel = -1; // force update of signal strength |
| synchronized (mDhcpInfo) { |
| mWifiInfo.setIpAddress(mDhcpInfo.ipAddress); |
| Log.d(TAG, "IP configuration: " + mDhcpInfo); |
| } |
| configureLinkProperties(); |
| setDetailedState(DetailedState.CONNECTED); |
| sendNetworkStateChangeBroadcast(mLastBssid); |
| //TODO: The framework is not detecting a DHCP renewal and a possible |
| //IP change. we should detect this and send out a config change broadcast |
| transitionTo(mConnectedState); |
| break; |
| case CMD_IP_CONFIG_FAILURE: |
| mWifiInfo.setIpAddress(0); |
| |
| Log.e(TAG, "IP configuration failed"); |
| /** |
| * If we've exceeded the maximum number of retries for DHCP |
| * to a given network, disable the network |
| */ |
| if (++mReconnectCount > getMaxDhcpRetries()) { |
| Log.e(TAG, "Failed " + |
| mReconnectCount + " times, Disabling " + mLastNetworkId); |
| WifiConfigStore.disableNetwork(mLastNetworkId); |
| } |
| |
| /* DHCP times out after about 30 seconds, we do a |
| * disconnect and an immediate reconnect to try again |
| */ |
| WifiNative.disconnectCommand(); |
| WifiNative.reconnectCommand(); |
| transitionTo(mDisconnectingState); |
| break; |
| case CMD_DISCONNECT: |
| WifiNative.disconnectCommand(); |
| transitionTo(mDisconnectingState); |
| break; |
| /* Ignore connection to same network */ |
| case CMD_CONNECT_NETWORK: |
| int netId = message.arg1; |
| if (mWifiInfo.getNetworkId() == netId) { |
| break; |
| } |
| return NOT_HANDLED; |
| /* Ignore */ |
| case NETWORK_CONNECTION_EVENT: |
| break; |
| case CMD_STOP_DRIVER: |
| sendMessage(CMD_DISCONNECT); |
| deferMessage(message); |
| break; |
| case CMD_SET_SCAN_MODE: |
| if (message.arg1 == SCAN_ONLY_MODE) { |
| sendMessage(CMD_DISCONNECT); |
| deferMessage(message); |
| } |
| break; |
| case CMD_RECONFIGURE_IP: |
| deferMessage(message); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| |
| @Override |
| public void exit() { |
| /* reset power state & bluetooth coexistence if on DHCP */ |
| if (!mUseStaticIp) { |
| if (mPowerMode != DRIVER_POWER_MODE_ACTIVE) { |
| WifiNative.setPowerModeCommand(mPowerMode); |
| } |
| |
| if (mModifiedBluetoothCoexistenceMode) { |
| // Set the coexistence mode back to its default value |
| WifiNative.setBluetoothCoexistenceModeCommand( |
| WifiNative.BLUETOOTH_COEXISTENCE_MODE_SENSE); |
| } |
| } |
| |
| } |
| } |
| |
| class ConnectedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| /* A successful WPS connection */ |
| if (mWpsStarted) { |
| WifiConfigStore.enableAllNetworks(); |
| WifiConfigStore.loadConfiguredNetworks(); |
| mWpsStarted = false; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_DISCONNECT: |
| WifiNative.disconnectCommand(); |
| transitionTo(mDisconnectingState); |
| break; |
| case CMD_RECONFIGURE_IP: |
| Log.d(TAG,"Reconfiguring IP on connection"); |
| NetworkUtils.resetConnections(mInterfaceName); |
| transitionTo(mConnectingState); |
| break; |
| case CMD_STOP_DRIVER: |
| sendMessage(CMD_DISCONNECT); |
| deferMessage(message); |
| break; |
| case CMD_SET_SCAN_MODE: |
| if (message.arg1 == SCAN_ONLY_MODE) { |
| sendMessage(CMD_DISCONNECT); |
| deferMessage(message); |
| } |
| break; |
| /* Ignore connection to same network */ |
| case CMD_CONNECT_NETWORK: |
| int netId = message.arg1; |
| if (mWifiInfo.getNetworkId() == netId) { |
| break; |
| } |
| return NOT_HANDLED; |
| /* Ignore */ |
| case NETWORK_CONNECTION_EVENT: |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class DisconnectingState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_STOP_DRIVER: /* Stop driver only after disconnect handled */ |
| deferMessage(message); |
| break; |
| case CMD_SET_SCAN_MODE: |
| if (message.arg1 == SCAN_ONLY_MODE) { |
| deferMessage(message); |
| } |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| @Override |
| public void exit() { |
| if (mEnableAllNetworks) { |
| mEnableAllNetworks = false; |
| WifiConfigStore.enableAllNetworks(); |
| } |
| } |
| } |
| |
| class DisconnectedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_SET_SCAN_MODE: |
| if (message.arg1 == SCAN_ONLY_MODE) { |
| WifiNative.setScanResultHandlingCommand(message.arg1); |
| //Supplicant disconnect to prevent further connects |
| WifiNative.disconnectCommand(); |
| mIsScanMode = true; |
| transitionTo(mScanModeState); |
| } |
| break; |
| /* Ignore network disconnect */ |
| case NETWORK_DISCONNECTION_EVENT: |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| class SoftApStartedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| EventLog.writeEvent(EVENTLOG_WIFI_STATE_CHANGED, getName()); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch(message.what) { |
| case CMD_STOP_AP: |
| Log.d(TAG,"Stopping Soft AP"); |
| setWifiApState(WIFI_AP_STATE_DISABLING); |
| try { |
| nwService.stopAccessPoint(); |
| } catch(Exception e) { |
| Log.e(TAG, "Exception in stopAccessPoint()"); |
| } |
| transitionTo(mDriverLoadedState); |
| break; |
| case CMD_START_AP: |
| Log.d(TAG,"SoftAP set on a running access point"); |
| try { |
| nwService.setAccessPoint((WifiConfiguration) message.obj, |
| mInterfaceName, |
| SOFTAP_IFACE); |
| } catch(Exception e) { |
| Log.e(TAG, "Exception in nwService during soft AP set"); |
| try { |
| nwService.stopAccessPoint(); |
| } catch (Exception ee) { |
| Slog.e(TAG, "Could not stop AP, :" + ee); |
| } |
| sendMessage(obtainMessage(CMD_UNLOAD_DRIVER, WIFI_AP_STATE_FAILED, 0)); |
| } |
| break; |
| /* Fail client mode operation when soft AP is enabled */ |
| case CMD_START_SUPPLICANT: |
| Log.e(TAG,"Cannot start supplicant with a running soft AP"); |
| setWifiState(WIFI_STATE_UNKNOWN); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| EventLog.writeEvent(EVENTLOG_WIFI_EVENT_HANDLED, message.what); |
| return HANDLED; |
| } |
| } |
| |
| |
| class SupplicantStateTracker extends HierarchicalStateMachine { |
| |
| private int mRssiPollToken = 0; |
| |
| /** |
| * The max number of the WPA supplicant loop iterations before we |
| * decide that the loop should be terminated: |
| */ |
| private static final int MAX_SUPPLICANT_LOOP_ITERATIONS = 4; |
| private int mLoopDetectIndex = 0; |
| private int mLoopDetectCount = 0; |
| |
| /** |
| * Supplicant state change commands follow |
| * the ordinal values defined in SupplicantState.java |
| */ |
| private static final int DISCONNECTED = 0; |
| private static final int INACTIVE = 1; |
| private static final int SCANNING = 2; |
| private static final int ASSOCIATING = 3; |
| private static final int ASSOCIATED = 4; |
| private static final int FOUR_WAY_HANDSHAKE = 5; |
| private static final int GROUP_HANDSHAKE = 6; |
| private static final int COMPLETED = 7; |
| private static final int DORMANT = 8; |
| private static final int UNINITIALIZED = 9; |
| private static final int INVALID = 10; |
| |
| private HierarchicalState mUninitializedState = new UninitializedState(); |
| private HierarchicalState mInitializedState = new InitializedState();; |
| private HierarchicalState mInactiveState = new InactiveState(); |
| private HierarchicalState mDisconnectState = new DisconnectedState(); |
| private HierarchicalState mScanState = new ScanState(); |
| private HierarchicalState mConnectState = new ConnectState(); |
| private HierarchicalState mHandshakeState = new HandshakeState(); |
| private HierarchicalState mCompletedState = new CompletedState(); |
| private HierarchicalState mDormantState = new DormantState(); |
| |
| public SupplicantStateTracker(Context context, Handler target) { |
| super(TAG, target.getLooper()); |
| |
| addState(mUninitializedState); |
| addState(mInitializedState); |
| addState(mInactiveState, mInitializedState); |
| addState(mDisconnectState, mInitializedState); |
| addState(mScanState, mInitializedState); |
| addState(mConnectState, mInitializedState); |
| addState(mHandshakeState, mConnectState); |
| addState(mCompletedState, mConnectState); |
| addState(mDormantState, mInitializedState); |
| |
| setInitialState(mUninitializedState); |
| |
| //start the state machine |
| start(); |
| } |
| |
| public void handleEvent(StateChangeResult stateChangeResult) { |
| SupplicantState newState = (SupplicantState) stateChangeResult.state; |
| |
| // Supplicant state change |
| // [31-13] Reserved for future use |
| // [8 - 0] Supplicant state (as defined in SupplicantState.java) |
| // 50023 supplicant_state_changed (custom|1|5) |
| EventLog.writeEvent(EVENTLOG_SUPPLICANT_STATE_CHANGED, newState.ordinal()); |
| |
| sendMessage(obtainMessage(newState.ordinal(), stateChangeResult)); |
| } |
| |
| public void resetSupplicantState() { |
| transitionTo(mUninitializedState); |
| } |
| |
| private void resetLoopDetection() { |
| mLoopDetectCount = 0; |
| mLoopDetectIndex = 0; |
| } |
| |
| private boolean handleTransition(Message msg) { |
| if (DBG) Log.d(TAG, getName() + msg.toString() + "\n"); |
| switch (msg.what) { |
| case DISCONNECTED: |
| transitionTo(mDisconnectState); |
| break; |
| case SCANNING: |
| transitionTo(mScanState); |
| break; |
| case ASSOCIATING: |
| StateChangeResult stateChangeResult = (StateChangeResult) msg.obj; |
| /* BSSID is valid only in ASSOCIATING state */ |
| mWifiInfo.setBSSID(stateChangeResult.BSSID); |
| //$FALL-THROUGH$ |
| case ASSOCIATED: |
| case FOUR_WAY_HANDSHAKE: |
| case GROUP_HANDSHAKE: |
| transitionTo(mHandshakeState); |
| break; |
| case COMPLETED: |
| transitionTo(mCompletedState); |
| break; |
| case DORMANT: |
| transitionTo(mDormantState); |
| break; |
| case INACTIVE: |
| transitionTo(mInactiveState); |
| break; |
| case UNINITIALIZED: |
| case INVALID: |
| transitionTo(mUninitializedState); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| StateChangeResult stateChangeResult = (StateChangeResult) msg.obj; |
| SupplicantState supState = (SupplicantState) stateChangeResult.state; |
| setDetailedState(WifiInfo.getDetailedStateOf(supState)); |
| mWifiInfo.setSupplicantState(supState); |
| mWifiInfo.setNetworkId(stateChangeResult.networkId); |
| return HANDLED; |
| } |
| |
| /******************************************************** |
| * HSM states |
| *******************************************************/ |
| |
| class InitializedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| if (DBG) Log.d(TAG, getName() + message.toString() + "\n"); |
| switch (message.what) { |
| case CMD_START_SCAN: |
| WifiNative.scanCommand(message.arg1 == SCAN_ACTIVE); |
| break; |
| default: |
| if (DBG) Log.w(TAG, "Ignoring " + message); |
| break; |
| } |
| return HANDLED; |
| } |
| } |
| |
| class UninitializedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| mNetworkInfo.setIsAvailable(false); |
| resetLoopDetection(); |
| mPasswordKeyMayBeIncorrect = false; |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| switch(message.what) { |
| default: |
| if (!handleTransition(message)) { |
| if (DBG) Log.w(TAG, "Ignoring " + message); |
| } |
| break; |
| } |
| return HANDLED; |
| } |
| @Override |
| public void exit() { |
| mNetworkInfo.setIsAvailable(true); |
| } |
| } |
| |
| class InactiveState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| |
| /* A failed WPS connection */ |
| if (mWpsStarted) { |
| Log.e(TAG, "WPS set up failed, enabling other networks"); |
| WifiConfigStore.enableAllNetworks(); |
| mWpsStarted = false; |
| } |
| |
| Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| mNetworkInfo.setIsAvailable(false); |
| resetLoopDetection(); |
| mPasswordKeyMayBeIncorrect = false; |
| |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| return handleTransition(message); |
| } |
| @Override |
| public void exit() { |
| mNetworkInfo.setIsAvailable(true); |
| } |
| } |
| |
| |
| class DisconnectedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| resetLoopDetection(); |
| |
| /* If a disconnect event happens after a password key failure |
| * event, disable the network |
| */ |
| if (mPasswordKeyMayBeIncorrect) { |
| Log.d(TAG, "Failed to authenticate, disabling network " + |
| mWifiInfo.getNetworkId()); |
| WifiConfigStore.disableNetwork(mWifiInfo.getNetworkId()); |
| mPasswordKeyMayBeIncorrect = false; |
| sendSupplicantStateChangedBroadcast(stateChangeResult, true); |
| } |
| else { |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| } |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| return handleTransition(message); |
| } |
| } |
| |
| class ScanState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| mPasswordKeyMayBeIncorrect = false; |
| resetLoopDetection(); |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| return handleTransition(message); |
| } |
| } |
| |
| class ConnectState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| switch (message.what) { |
| case CMD_START_SCAN: |
| WifiNative.setScanResultHandlingCommand(SCAN_ONLY_MODE); |
| WifiNative.scanCommand(message.arg1 == SCAN_ACTIVE); |
| break; |
| default: |
| return NOT_HANDLED; |
| } |
| return HANDLED; |
| } |
| } |
| |
| class HandshakeState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| final Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| if (mLoopDetectIndex > message.what) { |
| mLoopDetectCount++; |
| } |
| if (mLoopDetectCount > MAX_SUPPLICANT_LOOP_ITERATIONS) { |
| WifiConfigStore.disableNetwork(stateChangeResult.networkId); |
| mLoopDetectCount = 0; |
| } |
| |
| mLoopDetectIndex = message.what; |
| |
| mPasswordKeyMayBeIncorrect = false; |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| return handleTransition(message); |
| } |
| } |
| |
| class CompletedState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| mRssiPollToken++; |
| if (mEnableRssiPolling) { |
| sendMessageDelayed(obtainMessage(CMD_RSSI_POLL, mRssiPollToken, 0), |
| POLL_RSSI_INTERVAL_MSECS); |
| } |
| |
| resetLoopDetection(); |
| |
| mPasswordKeyMayBeIncorrect = false; |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| switch(message.what) { |
| case ASSOCIATING: |
| case ASSOCIATED: |
| case FOUR_WAY_HANDSHAKE: |
| case GROUP_HANDSHAKE: |
| case COMPLETED: |
| break; |
| case CMD_RSSI_POLL: |
| if (message.arg1 == mRssiPollToken) { |
| // Get Info and continue polling |
| requestPolledInfo(); |
| sendMessageDelayed(obtainMessage(CMD_RSSI_POLL, mRssiPollToken, 0), |
| POLL_RSSI_INTERVAL_MSECS); |
| } else { |
| // Polling has completed |
| } |
| break; |
| case CMD_ENABLE_RSSI_POLL: |
| mRssiPollToken++; |
| if (mEnableRssiPolling) { |
| // first poll |
| requestPolledInfo(); |
| sendMessageDelayed(obtainMessage(CMD_RSSI_POLL, mRssiPollToken, 0), |
| POLL_RSSI_INTERVAL_MSECS); |
| } |
| break; |
| default: |
| return handleTransition(message); |
| } |
| return HANDLED; |
| } |
| } |
| |
| class DormantState extends HierarchicalState { |
| @Override |
| public void enter() { |
| if (DBG) Log.d(TAG, getName() + "\n"); |
| Message message = getCurrentMessage(); |
| StateChangeResult stateChangeResult = (StateChangeResult) message.obj; |
| |
| resetLoopDetection(); |
| mPasswordKeyMayBeIncorrect = false; |
| |
| sendSupplicantStateChangedBroadcast(stateChangeResult, false); |
| |
| /* TODO: reconnect is now being handled at DHCP failure handling |
| * If we run into issues with staying in Dormant state, might |
| * need a reconnect here |
| */ |
| } |
| @Override |
| public boolean processMessage(Message message) { |
| return handleTransition(message); |
| } |
| } |
| } |
| } |