blob: 780100a48933dc80ac787963aa11376ff15ed95c [file] [log] [blame]
/******************************************************************************
*
* Copyright 2023-2024 NXP
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#include <aidl/android/hardware/nfc/INfc.h>
#include <android/binder_manager.h>
#include <android/binder_process.h>
#include <android/hardware/nfc/1.2/INfc.h>
#include "SecureElement.h"
#include "VirtualISO.h"
#include "phNxpConfig.h"
#define MAX_NFC_GET_RETRY 30
#define NFC_GET_SERVICE_DELAY_MS 100
#define TERMINAL_LEN 5
#define NAME_NXP_SPI_SE_TERMINAL_NUM "NXP_SPI_SE_TERMINAL_NUM"
#define NAME_NXP_VISO_SE_TERMINAL_NUM "NXP_VISO_SE_TERMINAL_NUM"
using INfc = android::hardware::nfc::V1_2::INfc;
using INfcAidl = ::aidl::android::hardware::nfc::INfc;
using ::aidl::android::hardware::secure_element::SecureElement;
using VirtualISO = aidl::vendor::nxp::virtual_iso::VirtualISO;
using android::OK;
using android::sp;
using android::status_t;
std::string NFC_AIDL_HAL_SERVICE_NAME = "android.hardware.nfc.INfc/default";
static inline void waitForNFCHAL() {
int retry = 0;
android::sp<INfc> nfc_service = nullptr;
std::shared_ptr<INfcAidl> nfc_aidl_service = nullptr;
ALOGI("Waiting for NFC HAL .. ");
do {
::ndk::SpAIBinder binder(
AServiceManager_checkService(NFC_AIDL_HAL_SERVICE_NAME.c_str()));
nfc_aidl_service = INfcAidl::fromBinder(binder);
if (nfc_aidl_service != nullptr) {
ALOGI("NFC HAL service is registered");
break;
}
/* Wait for 100 MS for HAL RETRY*/
usleep(NFC_GET_SERVICE_DELAY_MS * 1000);
} while (retry++ < MAX_NFC_GET_RETRY);
if (nfc_aidl_service == nullptr) {
ALOGE("Failed to get NFC AIDLHAL Service, trying to get HIDL service");
nfc_service = INfc::tryGetService();
if (nfc_service != nullptr) {
ALOGI("NFC HAL service is registered");
} else {
ALOGE("Failed to get NFC HAL Service");
}
}
}
int main() {
char terminalID[5] = "eSE1";
const char* SEterminal = "eSEx";
bool ret = false;
ALOGI("Secure Element AIDL HAL Service starting up");
if (!ABinderProcess_setThreadPoolMaxThreadCount(0)) {
ALOGE("failed to set thread pool max thread count");
return EXIT_FAILURE;
}
ABinderProcess_startThreadPool();
waitForNFCHAL();
ALOGI("Secure Element AIDL HAL Service starting up");
std::shared_ptr<SecureElement> se_service =
ndk::SharedRefBase::make<SecureElement>();
std::shared_ptr<VirtualISO> virtual_iso_service = nullptr;
if (GetNxpStrValue(NAME_NXP_SPI_SE_TERMINAL_NUM, terminalID, TERMINAL_LEN)) {
LOG(ERROR) << "eSETerminalId found";
ALOGE("eSETerminalId found val = %s ", terminalID);
ret = true;
}
ALOGI("Terminal val = %s", terminalID);
if ((ret) && (strncmp(SEterminal, terminalID, 3) == 0)) {
ALOGI("Terminal ID found");
const std::string seInstName =
std::string() + SecureElement::descriptor + "/" + terminalID;
binder_status_t status = AServiceManager_addService(
se_service->asBinder().get(), seInstName.c_str());
if (status != OK) {
ALOGE("Could not register service for Secure Element HAL Iface (%d).",
status);
goto shutdown;
}
ALOGI("Secure Element Service is ready");
}
#ifdef NXP_VISO_ENABLE
ALOGI("Virtual ISO HAL Service 1.0 is starting.");
virtual_iso_service = ndk::SharedRefBase::make<VirtualISO>();
ret = false;
if (GetNxpStrValue(NAME_NXP_VISO_SE_TERMINAL_NUM, terminalID, TERMINAL_LEN)) {
ALOGE("eUICCTerminalId found val = %s ", terminalID);
ret = true;
}
if ((ret) && (strncmp(SEterminal, terminalID, 3) == 0)) {
const std::string vISO_InstName =
std::string() + SecureElement::descriptor + "/" + terminalID;
binder_status_t status = AServiceManager_addService(
virtual_iso_service->asBinder().get(), vISO_InstName.c_str());
if (status != OK) {
ALOGE("Could not register service for Virtual ISO HAL Iface (%d).",
status);
goto shutdown;
}
}
ALOGI("Virtual ISO: Secure Element Service is ready");
#endif
ABinderProcess_joinThreadPool();
// Should not pass this line
shutdown:
// In normal operation, we don't expect the thread pool to exit
ALOGE("Secure Element Service is shutting down");
return EXIT_FAILURE;
}