| /* |
| * Copyright (C) 2013-2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "audio_hw_primary" |
| #define ATRACE_TAG ATRACE_TAG_AUDIO |
| /*#define LOG_NDEBUG 0*/ |
| /*#define VERY_VERY_VERBOSE_LOGGING*/ |
| #ifdef VERY_VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <sys/time.h> |
| #include <stdlib.h> |
| #include <math.h> |
| #include <dlfcn.h> |
| #include <sys/resource.h> |
| #include <sys/prctl.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/trace.h> |
| #include <cutils/str_parms.h> |
| #include <cutils/properties.h> |
| #include <cutils/atomic.h> |
| #include <cutils/sched_policy.h> |
| |
| #include <hardware/audio_effect.h> |
| #include <hardware/audio_alsaops.h> |
| #include <system/thread_defs.h> |
| #include <audio_effects/effect_aec.h> |
| #include <audio_effects/effect_ns.h> |
| #include "audio_hw.h" |
| #include "audio_extn.h" |
| #include "platform_api.h" |
| #include <platform.h> |
| #include "voice_extn.h" |
| |
| #include "sound/compress_params.h" |
| #include "audio_extn/tfa_98xx.h" |
| |
| /* COMPRESS_OFFLOAD_FRAGMENT_SIZE must be more than 8KB and a multiple of 32KB if more than 32KB. |
| * COMPRESS_OFFLOAD_FRAGMENT_SIZE * COMPRESS_OFFLOAD_NUM_FRAGMENTS must be less than 8MB. */ |
| #define COMPRESS_OFFLOAD_FRAGMENT_SIZE (256 * 1024) |
| // 2 buffers causes problems with high bitrate files |
| #define COMPRESS_OFFLOAD_NUM_FRAGMENTS 3 |
| /* ToDo: Check and update a proper value in msec */ |
| #define COMPRESS_OFFLOAD_PLAYBACK_LATENCY 96 |
| #define COMPRESS_PLAYBACK_VOLUME_MAX 0x2000 |
| |
| #define PROXY_OPEN_RETRY_COUNT 100 |
| #define PROXY_OPEN_WAIT_TIME 20 |
| |
| #define MIN_CHANNEL_COUNT 1 |
| #define DEFAULT_CHANNEL_COUNT 2 |
| |
| #ifndef MAX_TARGET_SPECIFIC_CHANNEL_CNT |
| #define MAX_CHANNEL_COUNT 1 |
| #else |
| #define MAX_CHANNEL_COUNT atoi(XSTR(MAX_TARGET_SPECIFIC_CHANNEL_CNT)) |
| #define XSTR(x) STR(x) |
| #define STR(x) #x |
| #endif |
| |
| #define ULL_PERIOD_SIZE (DEFAULT_OUTPUT_SAMPLING_RATE/1000) |
| |
| static unsigned int configured_low_latency_capture_period_size = |
| LOW_LATENCY_CAPTURE_PERIOD_SIZE; |
| |
| |
| #define MMAP_PERIOD_SIZE (DEFAULT_OUTPUT_SAMPLING_RATE/1000) |
| #define MMAP_PERIOD_COUNT 512 |
| |
| |
| /* This constant enables extended precision handling. |
| * TODO The flag is off until more testing is done. |
| */ |
| static const bool k_enable_extended_precision = false; |
| |
| struct pcm_config pcm_config_deep_buffer = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = DEEP_BUFFER_OUTPUT_PERIOD_SIZE, |
| .period_count = DEEP_BUFFER_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = DEEP_BUFFER_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| struct pcm_config pcm_config_low_latency = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = LOW_LATENCY_OUTPUT_PERIOD_SIZE, |
| .period_count = LOW_LATENCY_OUTPUT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| .stop_threshold = INT_MAX, |
| .avail_min = LOW_LATENCY_OUTPUT_PERIOD_SIZE / 4, |
| }; |
| |
| static int af_period_multiplier = 4; |
| struct pcm_config pcm_config_rt = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = ULL_PERIOD_SIZE, //1 ms |
| .period_count = 512, //=> buffer size is 512ms |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = ULL_PERIOD_SIZE*8, //8ms |
| .stop_threshold = INT_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = ULL_PERIOD_SIZE, //1 ms |
| }; |
| |
| struct pcm_config pcm_config_hdmi_multi = { |
| .channels = HDMI_MULTI_DEFAULT_CHANNEL_COUNT, /* changed when the stream is opened */ |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, /* changed when the stream is opened */ |
| .period_size = HDMI_MULTI_PERIOD_SIZE, |
| .period_count = HDMI_MULTI_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .avail_min = 0, |
| }; |
| |
| struct pcm_config pcm_config_mmap_playback = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = MMAP_PERIOD_SIZE, |
| .period_count = MMAP_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = MMAP_PERIOD_SIZE*8, |
| .stop_threshold = INT32_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = MMAP_PERIOD_SIZE, //1 ms |
| }; |
| |
| struct pcm_config pcm_config_audio_capture = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .period_count = AUDIO_CAPTURE_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .stop_threshold = INT_MAX, |
| .avail_min = 0, |
| }; |
| |
| struct pcm_config pcm_config_audio_capture_rt = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = ULL_PERIOD_SIZE, |
| .period_count = 512, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = ULL_PERIOD_SIZE, //1 ms |
| }; |
| |
| struct pcm_config pcm_config_mmap_capture = { |
| .channels = DEFAULT_CHANNEL_COUNT, |
| .rate = DEFAULT_OUTPUT_SAMPLING_RATE, |
| .period_size = MMAP_PERIOD_SIZE, |
| .period_count = MMAP_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .stop_threshold = INT_MAX, |
| .silence_threshold = 0, |
| .silence_size = 0, |
| .avail_min = MMAP_PERIOD_SIZE, //1 ms |
| }; |
| |
| #define AFE_PROXY_CHANNEL_COUNT 2 |
| #define AFE_PROXY_SAMPLING_RATE 48000 |
| |
| #define AFE_PROXY_PLAYBACK_PERIOD_SIZE 768 |
| #define AFE_PROXY_PLAYBACK_PERIOD_COUNT 4 |
| |
| struct pcm_config pcm_config_afe_proxy_playback = { |
| .channels = AFE_PROXY_CHANNEL_COUNT, |
| .rate = AFE_PROXY_SAMPLING_RATE, |
| .period_size = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| .period_count = AFE_PROXY_PLAYBACK_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| .stop_threshold = INT_MAX, |
| .avail_min = AFE_PROXY_PLAYBACK_PERIOD_SIZE, |
| }; |
| |
| #define AFE_PROXY_RECORD_PERIOD_SIZE 768 |
| #define AFE_PROXY_RECORD_PERIOD_COUNT 4 |
| |
| struct pcm_config pcm_config_afe_proxy_record = { |
| .channels = AFE_PROXY_CHANNEL_COUNT, |
| .rate = AFE_PROXY_SAMPLING_RATE, |
| .period_size = AFE_PROXY_RECORD_PERIOD_SIZE, |
| .period_count = AFE_PROXY_RECORD_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = AFE_PROXY_RECORD_PERIOD_SIZE, |
| .stop_threshold = INT_MAX, |
| .avail_min = AFE_PROXY_RECORD_PERIOD_SIZE, |
| }; |
| |
| const char * const use_case_table[AUDIO_USECASE_MAX] = { |
| [USECASE_AUDIO_PLAYBACK_DEEP_BUFFER] = "deep-buffer-playback", |
| [USECASE_AUDIO_PLAYBACK_LOW_LATENCY] = "low-latency-playback", |
| [USECASE_AUDIO_PLAYBACK_MULTI_CH] = "multi-channel-playback", |
| [USECASE_AUDIO_PLAYBACK_OFFLOAD] = "compress-offload-playback", |
| [USECASE_AUDIO_PLAYBACK_TTS] = "audio-tts-playback", |
| [USECASE_AUDIO_PLAYBACK_ULL] = "audio-ull-playback", |
| [USECASE_AUDIO_PLAYBACK_MMAP] = "mmap-playback", |
| |
| [USECASE_AUDIO_RECORD] = "audio-record", |
| [USECASE_AUDIO_RECORD_LOW_LATENCY] = "low-latency-record", |
| [USECASE_AUDIO_RECORD_MMAP] = "mmap-record", |
| |
| [USECASE_AUDIO_HFP_SCO] = "hfp-sco", |
| [USECASE_AUDIO_HFP_SCO_WB] = "hfp-sco-wb", |
| |
| [USECASE_VOICE_CALL] = "voice-call", |
| [USECASE_VOICE2_CALL] = "voice2-call", |
| [USECASE_VOLTE_CALL] = "volte-call", |
| [USECASE_QCHAT_CALL] = "qchat-call", |
| [USECASE_VOWLAN_CALL] = "vowlan-call", |
| [USECASE_VOICEMMODE1_CALL] = "voicemmode1-call", |
| [USECASE_VOICEMMODE2_CALL] = "voicemmode2-call", |
| |
| [USECASE_AUDIO_SPKR_CALIB_RX] = "spkr-rx-calib", |
| [USECASE_AUDIO_SPKR_CALIB_TX] = "spkr-vi-record", |
| |
| [USECASE_AUDIO_PLAYBACK_AFE_PROXY] = "afe-proxy-playback", |
| [USECASE_AUDIO_RECORD_AFE_PROXY] = "afe-proxy-record", |
| }; |
| |
| |
| #define STRING_TO_ENUM(string) { #string, string } |
| |
| struct string_to_enum { |
| const char *name; |
| uint32_t value; |
| }; |
| |
| static const struct string_to_enum out_channels_name_to_enum_table[] = { |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_STEREO), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_5POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_7POINT1), |
| }; |
| |
| static int set_voice_volume_l(struct audio_device *adev, float volume); |
| static struct audio_device *adev = NULL; |
| static pthread_mutex_t adev_init_lock; |
| static unsigned int audio_device_ref_count; |
| //cache last MBDRC cal step level |
| static int last_known_cal_step = -1 ; |
| |
| static bool may_use_noirq_mode(struct audio_device *adev, audio_usecase_t uc_id, |
| int flags __unused) |
| { |
| int dir = 0; |
| switch (uc_id) { |
| case USECASE_AUDIO_RECORD_LOW_LATENCY: |
| dir = 1; |
| case USECASE_AUDIO_PLAYBACK_ULL: |
| break; |
| default: |
| return false; |
| } |
| |
| int dev_id = platform_get_pcm_device_id(uc_id, dir == 0 ? |
| PCM_PLAYBACK : PCM_CAPTURE); |
| if (adev->adm_is_noirq_avail) |
| return adev->adm_is_noirq_avail(adev->adm_data, |
| adev->snd_card, dev_id, dir); |
| return false; |
| } |
| |
| static void register_out_stream(struct stream_out *out) |
| { |
| struct audio_device *adev = out->dev; |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) |
| return; |
| |
| if (!adev->adm_register_output_stream) |
| return; |
| |
| adev->adm_register_output_stream(adev->adm_data, |
| out->handle, |
| out->flags); |
| |
| if (!adev->adm_set_config) |
| return; |
| |
| if (out->realtime) { |
| adev->adm_set_config(adev->adm_data, |
| out->handle, |
| out->pcm, &out->config); |
| } |
| } |
| |
| static void register_in_stream(struct stream_in *in) |
| { |
| struct audio_device *adev = in->dev; |
| if (!adev->adm_register_input_stream) |
| return; |
| |
| adev->adm_register_input_stream(adev->adm_data, |
| in->capture_handle, |
| in->flags); |
| |
| if (!adev->adm_set_config) |
| return; |
| |
| if (in->realtime) { |
| adev->adm_set_config(adev->adm_data, |
| in->capture_handle, |
| in->pcm, |
| &in->config); |
| } |
| } |
| |
| static void request_out_focus(struct stream_out *out, long ns) |
| { |
| struct audio_device *adev = out->dev; |
| |
| if (out->routing_change) { |
| out->routing_change = false; |
| if (adev->adm_on_routing_change) |
| adev->adm_on_routing_change(adev->adm_data, out->handle); |
| } |
| |
| if (adev->adm_request_focus_v2) { |
| adev->adm_request_focus_v2(adev->adm_data, out->handle, ns); |
| } else if (adev->adm_request_focus) { |
| adev->adm_request_focus(adev->adm_data, out->handle); |
| } |
| } |
| |
| static void request_in_focus(struct stream_in *in, long ns) |
| { |
| struct audio_device *adev = in->dev; |
| |
| if (in->routing_change) { |
| in->routing_change = false; |
| if (adev->adm_on_routing_change) |
| adev->adm_on_routing_change(adev->adm_data, in->capture_handle); |
| } |
| |
| if (adev->adm_request_focus_v2) { |
| adev->adm_request_focus_v2(adev->adm_data, in->capture_handle, ns); |
| } else if (adev->adm_request_focus) { |
| adev->adm_request_focus(adev->adm_data, in->capture_handle); |
| } |
| } |
| |
| static void release_out_focus(struct stream_out *out, long ns __unused) |
| { |
| struct audio_device *adev = out->dev; |
| |
| if (adev->adm_abandon_focus) |
| adev->adm_abandon_focus(adev->adm_data, out->handle); |
| } |
| |
| static void release_in_focus(struct stream_in *in, long ns __unused) |
| { |
| struct audio_device *adev = in->dev; |
| if (adev->adm_abandon_focus) |
| adev->adm_abandon_focus(adev->adm_data, in->capture_handle); |
| } |
| |
| // Time string format similar to logcat, buffer_length must be >= 19 chars. |
| static void ns2string(int64_t ns, char *buffer, int buffer_length) |
| { |
| const int one_second = 1000000000; |
| const time_t sec = ns / one_second; |
| struct tm tm; |
| localtime_r(&sec, &tm); |
| snprintf(buffer, buffer_length, "%02d-%02d %02d:%02d:%02d.%03d", |
| tm.tm_mon + 1, // localtime_r uses months in 0 - 11 range |
| tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec, |
| (int)(ns % one_second / 1000000)); |
| } |
| |
| // Convert timespec to nsec. |
| static int64_t ts2ns(const struct timespec *ts) |
| { |
| return ts->tv_sec * 1000000000LL + ts->tv_nsec; |
| } |
| |
| // Log errors: consecutive errors with the same code will |
| // be aggregated if they occur within one second. |
| // A mutual exclusion lock must be held before calling. |
| static void log_error_l(struct error_log *log, int code) { |
| ++log->errors; |
| |
| struct timespec now_ts = { 0, 0 }; |
| (void)clock_gettime(CLOCK_REALTIME, &now_ts); |
| const int64_t now = ts2ns(&now_ts); |
| |
| // Within 1 second, cluster the same error codes together. |
| const int one_second = 1000000000; |
| if (code == log->entries[log->idx].code && |
| now - log->entries[log->idx].last_time < one_second) { |
| log->entries[log->idx].count++; |
| log->entries[log->idx].last_time = now; |
| return; |
| } |
| |
| // Add new error entry. |
| if (++log->idx >= ARRAY_SIZE(log->entries)) { |
| log->idx = 0; |
| } |
| log->entries[log->idx].count = 1; |
| log->entries[log->idx].code = code; |
| log->entries[log->idx].first_time = now; |
| log->entries[log->idx].last_time = now; |
| } |
| |
| // Dump information in the error log. A mutual exclusion lock |
| // should be held, but if that cannot be obtained, one should |
| // make a copy of the error log before calling -- the call is |
| // still safe, but there might be some misinterpreted data. |
| static void log_dump_l(const struct error_log *log, int fd) |
| { |
| dprintf(fd, " Errors: %u\n", log->errors); |
| if (log->errors == 0) |
| return; |
| |
| dprintf(fd, " Index Code Freq First time Last time\n"); |
| for (size_t i = 0; i < ARRAY_SIZE(log->entries); ++i) { |
| if (log->entries[i].count != 0) { |
| char first_time[32]; |
| char last_time[32]; |
| ns2string(log->entries[i].first_time, first_time, sizeof(first_time)); |
| ns2string(log->entries[i].last_time, last_time, sizeof(last_time)); |
| dprintf(fd, " %c%4zu %4d %5d %s %s\n", |
| i == log->idx ? '*' : ' ', // mark head position |
| i, log->entries[i].code, log->entries[i].count, |
| first_time, last_time); |
| } |
| } |
| } |
| |
| static int parse_snd_card_status(struct str_parms * parms, int * card, |
| card_status_t * status) |
| { |
| char value[32]={0}; |
| char state[32]={0}; |
| |
| int ret = str_parms_get_str(parms, "SND_CARD_STATUS", value, sizeof(value)); |
| |
| if (ret < 0) |
| return -1; |
| |
| // sscanf should be okay as value is of max length 32. |
| // same as sizeof state. |
| if (sscanf(value, "%d,%s", card, state) < 2) |
| return -1; |
| |
| *status = !strcmp(state, "ONLINE") ? CARD_STATUS_ONLINE : |
| CARD_STATUS_OFFLINE; |
| return 0; |
| } |
| |
| __attribute__ ((visibility ("default"))) |
| bool audio_hw_send_gain_dep_calibration(int level) { |
| bool ret_val = false; |
| ALOGV("%s: enter ... ", __func__); |
| |
| pthread_mutex_lock(&adev_init_lock); |
| |
| if (adev != NULL && adev->platform != NULL) { |
| pthread_mutex_lock(&adev->lock); |
| ret_val = platform_send_gain_dep_cal(adev->platform, level); |
| pthread_mutex_unlock(&adev->lock); |
| |
| // if cal set fails, cache level info |
| // if cal set succeds, reset known last cal set |
| if (!ret_val) |
| last_known_cal_step = level; |
| else if (last_known_cal_step != -1) |
| last_known_cal_step = -1; |
| } else { |
| ALOGE("%s: %s is NULL", __func__, adev == NULL ? "adev" : "adev->platform"); |
| } |
| |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| ALOGV("%s: exit with ret_val %d ", __func__, ret_val); |
| return ret_val; |
| } |
| |
| __attribute__ ((visibility ("default"))) |
| int audio_hw_get_gain_level_mapping(struct amp_db_and_gain_table *mapping_tbl, |
| int table_size) { |
| int ret_val = 0; |
| ALOGV("%s: enter ... ", __func__); |
| |
| pthread_mutex_lock(&adev_init_lock); |
| if (adev == NULL) { |
| ALOGW("%s: adev is NULL .... ", __func__); |
| goto done; |
| } |
| |
| pthread_mutex_lock(&adev->lock); |
| ret_val = platform_get_gain_level_mapping(mapping_tbl, table_size); |
| pthread_mutex_unlock(&adev->lock); |
| done: |
| pthread_mutex_unlock(&adev_init_lock); |
| ALOGV("%s: exit ... ", __func__); |
| return ret_val; |
| } |
| |
| static bool is_supported_format(audio_format_t format) |
| { |
| switch (format) { |
| case AUDIO_FORMAT_MP3: |
| case AUDIO_FORMAT_AAC_LC: |
| case AUDIO_FORMAT_AAC_HE_V1: |
| case AUDIO_FORMAT_AAC_HE_V2: |
| return true; |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| static inline bool is_mmap_usecase(audio_usecase_t uc_id) |
| { |
| return (uc_id == USECASE_AUDIO_RECORD_AFE_PROXY) || |
| (uc_id == USECASE_AUDIO_PLAYBACK_AFE_PROXY); |
| } |
| |
| static int get_snd_codec_id(audio_format_t format) |
| { |
| int id = 0; |
| |
| switch (format & AUDIO_FORMAT_MAIN_MASK) { |
| case AUDIO_FORMAT_MP3: |
| id = SND_AUDIOCODEC_MP3; |
| break; |
| case AUDIO_FORMAT_AAC: |
| id = SND_AUDIOCODEC_AAC; |
| break; |
| default: |
| ALOGE("%s: Unsupported audio format", __func__); |
| } |
| |
| return id; |
| } |
| |
| static int audio_ssr_status(struct audio_device *adev) |
| { |
| int ret = 0; |
| struct mixer_ctl *ctl; |
| const char *mixer_ctl_name = "Audio SSR Status"; |
| |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| ret = mixer_ctl_get_value(ctl, 0); |
| ALOGD("%s: value: %d", __func__, ret); |
| return ret; |
| } |
| |
| int enable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase) |
| { |
| snd_device_t snd_device; |
| char mixer_path[50]; |
| |
| if (usecase == NULL) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| |
| audio_extn_utils_send_app_type_cfg(adev, usecase); |
| strcpy(mixer_path, use_case_table[usecase->id]); |
| platform_add_backend_name(adev->platform, mixer_path, snd_device); |
| ALOGD("%s: usecase(%d) apply and update mixer path: %s", __func__, usecase->id, mixer_path); |
| audio_route_apply_and_update_path(adev->audio_route, mixer_path); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int disable_audio_route(struct audio_device *adev, |
| struct audio_usecase *usecase) |
| { |
| snd_device_t snd_device; |
| char mixer_path[50]; |
| |
| if (usecase == NULL) |
| return -EINVAL; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, usecase->id); |
| if (usecase->type == PCM_CAPTURE) |
| snd_device = usecase->in_snd_device; |
| else |
| snd_device = usecase->out_snd_device; |
| strcpy(mixer_path, use_case_table[usecase->id]); |
| platform_add_backend_name(adev->platform, mixer_path, snd_device); |
| ALOGD("%s: usecase(%d) reset and update mixer path: %s", __func__, usecase->id, mixer_path); |
| audio_route_reset_and_update_path(adev->audio_route, mixer_path); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| int enable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device) |
| { |
| int i, num_devices = 0; |
| snd_device_t new_snd_devices[2]; |
| int ret_val = -EINVAL; |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| goto on_error; |
| } |
| |
| platform_send_audio_calibration(adev->platform, snd_device); |
| |
| if (adev->snd_dev_ref_cnt[snd_device] >= 1) { |
| ALOGV("%s: snd_device(%d: %s) is already active", |
| __func__, snd_device, platform_get_snd_device_name(snd_device)); |
| goto on_success; |
| } |
| |
| /* due to the possibility of calibration overwrite between listen |
| and audio, notify sound trigger hal before audio calibration is sent */ |
| audio_extn_sound_trigger_update_device_status(snd_device, |
| ST_EVENT_SND_DEVICE_BUSY); |
| |
| if (audio_extn_spkr_prot_is_enabled()) |
| audio_extn_spkr_prot_calib_cancel(adev); |
| |
| audio_extn_dsm_feedback_enable(adev, snd_device, true); |
| |
| if ((snd_device == SND_DEVICE_OUT_SPEAKER || |
| snd_device == SND_DEVICE_OUT_VOICE_SPEAKER) && |
| audio_extn_spkr_prot_is_enabled()) { |
| if (audio_extn_spkr_prot_get_acdb_id(snd_device) < 0) { |
| goto on_error; |
| } |
| if (audio_extn_spkr_prot_start_processing(snd_device)) { |
| ALOGE("%s: spkr_start_processing failed", __func__); |
| goto on_error; |
| } |
| } else if (platform_can_split_snd_device(snd_device, |
| &num_devices, |
| new_snd_devices) == 0) { |
| for (i = 0; i < num_devices; i++) { |
| enable_snd_device(adev, new_snd_devices[i]); |
| } |
| platform_set_speaker_gain_in_combo(adev, snd_device, true); |
| } else { |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| if (platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0 ) { |
| ALOGE(" %s: Invalid sound device returned", __func__); |
| goto on_error; |
| } |
| |
| ALOGD("%s: snd_device(%d: %s)", __func__, snd_device, device_name); |
| audio_route_apply_and_update_path(adev->audio_route, device_name); |
| } |
| on_success: |
| adev->snd_dev_ref_cnt[snd_device]++; |
| ret_val = 0; |
| on_error: |
| return ret_val; |
| } |
| |
| int disable_snd_device(struct audio_device *adev, |
| snd_device_t snd_device) |
| { |
| int i, num_devices = 0; |
| snd_device_t new_snd_devices[2]; |
| |
| if (snd_device < SND_DEVICE_MIN || |
| snd_device >= SND_DEVICE_MAX) { |
| ALOGE("%s: Invalid sound device %d", __func__, snd_device); |
| return -EINVAL; |
| } |
| if (adev->snd_dev_ref_cnt[snd_device] <= 0) { |
| ALOGE("%s: device ref cnt is already 0", __func__); |
| return -EINVAL; |
| } |
| audio_extn_tfa_98xx_disable_speaker(snd_device); |
| |
| adev->snd_dev_ref_cnt[snd_device]--; |
| if (adev->snd_dev_ref_cnt[snd_device] == 0) { |
| audio_extn_dsm_feedback_enable(adev, snd_device, false); |
| if ((snd_device == SND_DEVICE_OUT_SPEAKER || |
| snd_device == SND_DEVICE_OUT_VOICE_SPEAKER) && |
| audio_extn_spkr_prot_is_enabled()) { |
| audio_extn_spkr_prot_stop_processing(snd_device); |
| } else if (platform_can_split_snd_device(snd_device, |
| &num_devices, |
| new_snd_devices) == 0) { |
| for (i = 0; i < num_devices; i++) { |
| disable_snd_device(adev, new_snd_devices[i]); |
| } |
| platform_set_speaker_gain_in_combo(adev, snd_device, false); |
| } else { |
| char device_name[DEVICE_NAME_MAX_SIZE] = {0}; |
| if (platform_get_snd_device_name_extn(adev->platform, snd_device, device_name) < 0 ) { |
| ALOGE(" %s: Invalid sound device returned", __func__); |
| return -EINVAL; |
| } |
| |
| ALOGD("%s: snd_device(%d: %s)", __func__, snd_device, device_name); |
| audio_route_reset_and_update_path(adev->audio_route, device_name); |
| } |
| audio_extn_sound_trigger_update_device_status(snd_device, |
| ST_EVENT_SND_DEVICE_FREE); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| legend: |
| uc - existing usecase |
| new_uc - new usecase |
| d1, d11, d2 - SND_DEVICE enums |
| a1, a2 - corresponding ANDROID device enums |
| B, B1, B2 - backend strings |
| |
| case 1 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d1 (a1), d2 (a2) B1, B2 |
| |
| resolution: disable and enable uc->dev on d1 |
| |
| case 2 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d11 (a1) B1 |
| |
| resolution: need to switch uc since d1 and d11 are related |
| (e.g. speaker and voice-speaker) |
| use ANDROID_DEVICE_OUT enums to match devices since SND_DEVICE enums may vary |
| |
| case 3 |
| uc->dev d1 (a1) B1 |
| new_uc->dev d2 (a2) B2 |
| |
| resolution: no need to switch uc |
| |
| case 4 |
| uc->dev d1 (a1) B |
| new_uc->dev d2 (a2) B |
| |
| resolution: disable enable uc-dev on d2 since backends match |
| we cannot enable two streams on two different devices if they |
| share the same backend. e.g. if offload is on speaker device using |
| QUAD_MI2S backend and a low-latency stream is started on voice-handset |
| using the same backend, offload must also be switched to voice-handset. |
| |
| case 5 |
| uc->dev d1 (a1) B |
| new_uc->dev d1 (a1), d2 (a2) B |
| |
| resolution: disable enable uc-dev on d2 since backends match |
| we cannot enable two streams on two different devices if they |
| share the same backend. |
| |
| case 6 |
| uc->dev d1 a1 B1 |
| new_uc->dev d2 a1 B2 |
| |
| resolution: no need to switch |
| |
| case 7 |
| |
| uc->dev d1 (a1), d2 (a2) B1, B2 |
| new_uc->dev d1 B1 |
| |
| resolution: no need to switch |
| |
| */ |
| static snd_device_t derive_playback_snd_device(struct audio_usecase *uc, |
| struct audio_usecase *new_uc, |
| snd_device_t new_snd_device) |
| { |
| audio_devices_t a1 = uc->stream.out->devices; |
| audio_devices_t a2 = new_uc->stream.out->devices; |
| |
| snd_device_t d1 = uc->out_snd_device; |
| snd_device_t d2 = new_snd_device; |
| |
| // Treat as a special case when a1 and a2 are not disjoint |
| if ((a1 != a2) && (a1 & a2)) { |
| snd_device_t d3[2]; |
| int num_devices = 0; |
| int ret = platform_can_split_snd_device(popcount(a1) > 1 ? d1 : d2, |
| &num_devices, |
| d3); |
| if (ret < 0) { |
| if (ret != -ENOSYS) { |
| ALOGW("%s failed to split snd_device %d", |
| __func__, |
| popcount(a1) > 1 ? d1 : d2); |
| } |
| goto end; |
| } |
| |
| // NB: case 7 is hypothetical and isn't a practical usecase yet. |
| // But if it does happen, we need to give priority to d2 if |
| // the combo devices active on the existing usecase share a backend. |
| // This is because we cannot have a usecase active on a combo device |
| // and a new usecase requests one device in this combo pair. |
| if (platform_check_backends_match(d3[0], d3[1])) { |
| return d2; // case 5 |
| } else { |
| return d1; // case 1 |
| } |
| } else { |
| if (platform_check_backends_match(d1, d2)) { |
| return d2; // case 2, 4 |
| } else { |
| return d1; // case 6, 3 |
| } |
| } |
| |
| end: |
| return d2; // return whatever was calculated before. |
| } |
| |
| static void check_and_route_playback_usecases(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| |
| platform_check_and_set_playback_backend_cfg(adev, uc_info, snd_device); |
| |
| /* |
| * This function is to make sure that all the usecases that are active on |
| * the hardware codec backend are always routed to any one device that is |
| * handled by the hardware codec. |
| * For example, if low-latency and deep-buffer usecases are currently active |
| * on speaker and out_set_parameters(headset) is received on low-latency |
| * output, then we have to make sure deep-buffer is also switched to headset, |
| * because of the limitation that both the devices cannot be enabled |
| * at the same time as they share the same backend. |
| */ |
| /* Disable all the usecases on the shared backend other than the |
| specified usecase */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type != PCM_CAPTURE && |
| usecase != uc_info && |
| usecase->out_snd_device != snd_device && |
| usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND && |
| platform_check_backends_match(snd_device, usecase->out_snd_device)) { |
| ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->out_snd_device)); |
| disable_audio_route(adev, usecase); |
| switch_device[usecase->id] = true; |
| num_uc_to_switch++; |
| } |
| } |
| |
| if (num_uc_to_switch) { |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->out_snd_device); |
| } |
| } |
| |
| snd_device_t d_device; |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| d_device = derive_playback_snd_device(usecase, uc_info, |
| snd_device); |
| enable_snd_device(adev, d_device); |
| /* Update the out_snd_device before enabling the audio route */ |
| usecase->out_snd_device = d_device; |
| } |
| } |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id] ) { |
| enable_audio_route(adev, usecase); |
| } |
| } |
| } |
| } |
| |
| static void check_and_route_capture_usecases(struct audio_device *adev, |
| struct audio_usecase *uc_info, |
| snd_device_t snd_device) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool switch_device[AUDIO_USECASE_MAX]; |
| int i, num_uc_to_switch = 0; |
| |
| platform_check_and_set_capture_backend_cfg(adev, uc_info, snd_device); |
| |
| /* |
| * This function is to make sure that all the active capture usecases |
| * are always routed to the same input sound device. |
| * For example, if audio-record and voice-call usecases are currently |
| * active on speaker(rx) and speaker-mic (tx) and out_set_parameters(earpiece) |
| * is received for voice call then we have to make sure that audio-record |
| * usecase is also switched to earpiece i.e. voice-dmic-ef, |
| * because of the limitation that two devices cannot be enabled |
| * at the same time if they share the same backend. |
| */ |
| for (i = 0; i < AUDIO_USECASE_MAX; i++) |
| switch_device[i] = false; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type != PCM_PLAYBACK && |
| usecase != uc_info && |
| usecase->in_snd_device != snd_device && |
| (usecase->id != USECASE_AUDIO_SPKR_CALIB_TX)) { |
| ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", |
| __func__, use_case_table[usecase->id], |
| platform_get_snd_device_name(usecase->in_snd_device)); |
| disable_audio_route(adev, usecase); |
| switch_device[usecase->id] = true; |
| num_uc_to_switch++; |
| } |
| } |
| |
| if (num_uc_to_switch) { |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| disable_snd_device(adev, usecase->in_snd_device); |
| } |
| } |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (switch_device[usecase->id]) { |
| enable_snd_device(adev, snd_device); |
| } |
| } |
| |
| /* Re-route all the usecases on the shared backend other than the |
| specified usecase to new snd devices */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| /* Update the in_snd_device only before enabling the audio route */ |
| if (switch_device[usecase->id] ) { |
| usecase->in_snd_device = snd_device; |
| enable_audio_route(adev, usecase); |
| } |
| } |
| } |
| } |
| |
| /* must be called with hw device mutex locked */ |
| static int read_hdmi_channel_masks(struct stream_out *out) |
| { |
| int ret = 0; |
| int channels = platform_edid_get_max_channels(out->dev->platform); |
| |
| switch (channels) { |
| /* |
| * Do not handle stereo output in Multi-channel cases |
| * Stereo case is handled in normal playback path |
| */ |
| case 6: |
| ALOGV("%s: HDMI supports 5.1", __func__); |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_5POINT1; |
| break; |
| case 8: |
| ALOGV("%s: HDMI supports 5.1 and 7.1 channels", __func__); |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_5POINT1; |
| out->supported_channel_masks[1] = AUDIO_CHANNEL_OUT_7POINT1; |
| break; |
| default: |
| ALOGE("HDMI does not support multi channel playback"); |
| ret = -ENOSYS; |
| break; |
| } |
| return ret; |
| } |
| |
| static audio_usecase_t get_voice_usecase_id_from_list(struct audio_device *adev) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == VOICE_CALL) { |
| ALOGV("%s: usecase id %d", __func__, usecase->id); |
| return usecase->id; |
| } |
| } |
| return USECASE_INVALID; |
| } |
| |
| struct audio_usecase *get_usecase_from_list(struct audio_device *adev, |
| audio_usecase_t uc_id) |
| { |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->id == uc_id) |
| return usecase; |
| } |
| return NULL; |
| } |
| |
| int select_devices(struct audio_device *adev, |
| audio_usecase_t uc_id) |
| { |
| snd_device_t out_snd_device = SND_DEVICE_NONE; |
| snd_device_t in_snd_device = SND_DEVICE_NONE; |
| struct audio_usecase *usecase = NULL; |
| struct audio_usecase *vc_usecase = NULL; |
| struct audio_usecase *hfp_usecase = NULL; |
| audio_usecase_t hfp_ucid; |
| struct listnode *node; |
| int status = 0; |
| |
| usecase = get_usecase_from_list(adev, uc_id); |
| if (usecase == NULL) { |
| ALOGE("%s: Could not find the usecase(%d)", __func__, uc_id); |
| return -EINVAL; |
| } |
| |
| if ((usecase->type == VOICE_CALL) || |
| (usecase->type == PCM_HFP_CALL)) { |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out->devices); |
| in_snd_device = platform_get_input_snd_device(adev->platform, usecase->stream.out->devices); |
| usecase->devices = usecase->stream.out->devices; |
| } else { |
| /* |
| * If the voice call is active, use the sound devices of voice call usecase |
| * so that it would not result any device switch. All the usecases will |
| * be switched to new device when select_devices() is called for voice call |
| * usecase. This is to avoid switching devices for voice call when |
| * check_and_route_playback_usecases() is called below. |
| */ |
| if (voice_is_in_call(adev)) { |
| vc_usecase = get_usecase_from_list(adev, |
| get_voice_usecase_id_from_list(adev)); |
| if ((vc_usecase != NULL) && |
| ((vc_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) || |
| (usecase->devices == AUDIO_DEVICE_IN_VOICE_CALL))) { |
| in_snd_device = vc_usecase->in_snd_device; |
| out_snd_device = vc_usecase->out_snd_device; |
| } |
| } else if (audio_extn_hfp_is_active(adev)) { |
| hfp_ucid = audio_extn_hfp_get_usecase(); |
| hfp_usecase = get_usecase_from_list(adev, hfp_ucid); |
| if (hfp_usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) { |
| in_snd_device = hfp_usecase->in_snd_device; |
| out_snd_device = hfp_usecase->out_snd_device; |
| } |
| } |
| if (usecase->type == PCM_PLAYBACK) { |
| usecase->devices = usecase->stream.out->devices; |
| in_snd_device = SND_DEVICE_NONE; |
| if (out_snd_device == SND_DEVICE_NONE) { |
| out_snd_device = platform_get_output_snd_device(adev->platform, |
| usecase->stream.out->devices); |
| if (usecase->stream.out == adev->primary_output && |
| adev->active_input && |
| (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION || |
| adev->mode == AUDIO_MODE_IN_COMMUNICATION) && |
| out_snd_device != usecase->out_snd_device) { |
| select_devices(adev, adev->active_input->usecase); |
| } |
| } |
| } else if (usecase->type == PCM_CAPTURE) { |
| usecase->devices = usecase->stream.in->device; |
| out_snd_device = SND_DEVICE_NONE; |
| if (in_snd_device == SND_DEVICE_NONE) { |
| audio_devices_t out_device = AUDIO_DEVICE_NONE; |
| if (adev->active_input && |
| (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION || |
| adev->mode == AUDIO_MODE_IN_COMMUNICATION)) { |
| platform_set_echo_reference(adev, false, AUDIO_DEVICE_NONE); |
| if (usecase->id == USECASE_AUDIO_RECORD_AFE_PROXY) { |
| out_device = AUDIO_DEVICE_OUT_TELEPHONY_TX; |
| } else if (adev->primary_output) { |
| out_device = adev->primary_output->devices; |
| } |
| } |
| in_snd_device = platform_get_input_snd_device(adev->platform, out_device); |
| } |
| } |
| } |
| |
| if (out_snd_device == usecase->out_snd_device && |
| in_snd_device == usecase->in_snd_device) { |
| return 0; |
| } |
| |
| if (out_snd_device != SND_DEVICE_NONE && |
| out_snd_device != adev->last_logged_snd_device[uc_id][0]) { |
| ALOGD("%s: changing use case %s output device from(%d: %s, acdb %d) to (%d: %s, acdb %d)", |
| __func__, |
| use_case_table[uc_id], |
| adev->last_logged_snd_device[uc_id][0], |
| platform_get_snd_device_name(adev->last_logged_snd_device[uc_id][0]), |
| adev->last_logged_snd_device[uc_id][0] != SND_DEVICE_NONE ? |
| platform_get_snd_device_acdb_id(adev->last_logged_snd_device[uc_id][0]) : |
| -1, |
| out_snd_device, |
| platform_get_snd_device_name(out_snd_device), |
| platform_get_snd_device_acdb_id(out_snd_device)); |
| adev->last_logged_snd_device[uc_id][0] = out_snd_device; |
| } |
| if (in_snd_device != SND_DEVICE_NONE && |
| in_snd_device != adev->last_logged_snd_device[uc_id][1]) { |
| ALOGD("%s: changing use case %s input device from(%d: %s, acdb %d) to (%d: %s, acdb %d)", |
| __func__, |
| use_case_table[uc_id], |
| adev->last_logged_snd_device[uc_id][1], |
| platform_get_snd_device_name(adev->last_logged_snd_device[uc_id][1]), |
| adev->last_logged_snd_device[uc_id][1] != SND_DEVICE_NONE ? |
| platform_get_snd_device_acdb_id(adev->last_logged_snd_device[uc_id][1]) : |
| -1, |
| in_snd_device, |
| platform_get_snd_device_name(in_snd_device), |
| platform_get_snd_device_acdb_id(in_snd_device)); |
| adev->last_logged_snd_device[uc_id][1] = in_snd_device; |
| } |
| |
| /* |
| * Limitation: While in call, to do a device switch we need to disable |
| * and enable both RX and TX devices though one of them is same as current |
| * device. |
| */ |
| if ((usecase->type == VOICE_CALL) && |
| (usecase->in_snd_device != SND_DEVICE_NONE) && |
| (usecase->out_snd_device != SND_DEVICE_NONE)) { |
| status = platform_switch_voice_call_device_pre(adev->platform); |
| /* Disable sidetone only if voice call already exists */ |
| if (voice_is_call_state_active(adev)) |
| voice_set_sidetone(adev, usecase->out_snd_device, false); |
| } |
| |
| /* Disable current sound devices */ |
| if (usecase->out_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase); |
| disable_snd_device(adev, usecase->out_snd_device); |
| } |
| |
| if (usecase->in_snd_device != SND_DEVICE_NONE) { |
| disable_audio_route(adev, usecase); |
| disable_snd_device(adev, usecase->in_snd_device); |
| } |
| |
| /* Applicable only on the targets that has external modem. |
| * New device information should be sent to modem before enabling |
| * the devices to reduce in-call device switch time. |
| */ |
| if ((usecase->type == VOICE_CALL) && |
| (usecase->in_snd_device != SND_DEVICE_NONE) && |
| (usecase->out_snd_device != SND_DEVICE_NONE)) { |
| status = platform_switch_voice_call_enable_device_config(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| } |
| |
| /* Enable new sound devices */ |
| if (out_snd_device != SND_DEVICE_NONE) { |
| if ((usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) || |
| (usecase->devices & AUDIO_DEVICE_OUT_USB_DEVICE)) |
| check_and_route_playback_usecases(adev, usecase, out_snd_device); |
| enable_snd_device(adev, out_snd_device); |
| } |
| |
| if (in_snd_device != SND_DEVICE_NONE) { |
| check_and_route_capture_usecases(adev, usecase, in_snd_device); |
| enable_snd_device(adev, in_snd_device); |
| } |
| |
| if (usecase->type == VOICE_CALL) |
| status = platform_switch_voice_call_device_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| |
| usecase->in_snd_device = in_snd_device; |
| usecase->out_snd_device = out_snd_device; |
| |
| audio_extn_tfa_98xx_set_mode(); |
| |
| enable_audio_route(adev, usecase); |
| |
| /* Applicable only on the targets that has external modem. |
| * Enable device command should be sent to modem only after |
| * enabling voice call mixer controls |
| */ |
| if (usecase->type == VOICE_CALL) { |
| status = platform_switch_voice_call_usecase_route_post(adev->platform, |
| out_snd_device, |
| in_snd_device); |
| /* Enable sidetone only if voice call already exists */ |
| if (voice_is_call_state_active(adev)) |
| voice_set_sidetone(adev, out_snd_device, true); |
| } |
| |
| return status; |
| } |
| |
| static int stop_input_stream(struct stream_in *in) |
| { |
| int i, ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| |
| adev->active_input = NULL; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| in->usecase, use_case_table[in->usecase]); |
| uc_info = get_usecase_from_list(adev, in->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, in->usecase); |
| return -EINVAL; |
| } |
| |
| /* 1. Disable stream specific mixer controls */ |
| disable_audio_route(adev, uc_info); |
| |
| /* 2. Disable the tx device */ |
| disable_snd_device(adev, uc_info->in_snd_device); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_input_stream(struct stream_in *in) |
| { |
| /* 1. Enable output device and stream routing controls */ |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = in->dev; |
| |
| ALOGV("%s: enter: usecase(%d)", __func__, in->usecase); |
| |
| if (audio_extn_tfa_98xx_is_supported() && !audio_ssr_status(adev)) |
| return -EIO; |
| |
| if (in->card_status == CARD_STATUS_OFFLINE || |
| adev->card_status == CARD_STATUS_OFFLINE) { |
| ALOGW("in->card_status or adev->card_status offline, try again"); |
| ret = -EAGAIN; |
| goto error_config; |
| } |
| |
| in->pcm_device_id = platform_get_pcm_device_id(in->usecase, PCM_CAPTURE); |
| if (in->pcm_device_id < 0) { |
| ALOGE("%s: Could not find PCM device id for the usecase(%d)", |
| __func__, in->usecase); |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| adev->active_input = in; |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| uc_info->id = in->usecase; |
| uc_info->type = PCM_CAPTURE; |
| uc_info->stream.in = in; |
| uc_info->devices = in->device; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| |
| audio_extn_perf_lock_acquire(); |
| |
| select_devices(adev, in->usecase); |
| |
| if (in->usecase == USECASE_AUDIO_RECORD_MMAP) { |
| if (!pcm_is_ready(in->pcm)) { |
| ALOGE("%s: pcm stream not ready", __func__); |
| goto error_open; |
| } |
| ret = pcm_prepare(in->pcm); |
| if (ret < 0) { |
| ALOGE("%s: MMAP pcm_prepare failed ret %d", __func__, ret); |
| goto error_open; } |
| ret = pcm_start(in->pcm); |
| if (ret < 0) { |
| ALOGE("%s: MMAP pcm_start failed ret %d", __func__, ret); |
| goto error_open; |
| } |
| } else { |
| unsigned int flags = PCM_IN | PCM_MONOTONIC; |
| unsigned int pcm_open_retry_count = 0; |
| |
| if (in->usecase == USECASE_AUDIO_RECORD_AFE_PROXY) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| pcm_open_retry_count = PROXY_OPEN_RETRY_COUNT; |
| } else if (in->realtime) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| } |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d), channels %d", |
| __func__, adev->snd_card, in->pcm_device_id, in->config.channels); |
| |
| while (1) { |
| in->pcm = pcm_open(adev->snd_card, in->pcm_device_id, |
| flags, &in->config); |
| if (in->pcm == NULL || !pcm_is_ready(in->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(in->pcm)); |
| if (in->pcm != NULL) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| if (pcm_open_retry_count-- == 0) { |
| ret = -EIO; |
| goto error_open; |
| } |
| usleep(PROXY_OPEN_WAIT_TIME * 1000); |
| continue; |
| } |
| break; |
| } |
| |
| ALOGV("%s: pcm_prepare", __func__); |
| ret = pcm_prepare(in->pcm); |
| if (ret < 0) { |
| ALOGE("%s: pcm_prepare returned %d", __func__, ret); |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| goto error_open; |
| } |
| if (in->realtime) { |
| ret = pcm_start(in->pcm); |
| if (ret < 0) { |
| ALOGE("%s: RT pcm_start failed ret %d", __func__, ret); |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| goto error_open; |
| } |
| } |
| } |
| register_in_stream(in); |
| audio_extn_perf_lock_release(); |
| ALOGV("%s: exit", __func__); |
| |
| return 0; |
| |
| error_open: |
| stop_input_stream(in); |
| audio_extn_perf_lock_release(); |
| |
| error_config: |
| adev->active_input = NULL; |
| ALOGW("%s: exit: status(%d)", __func__, ret); |
| |
| return ret; |
| } |
| |
| void lock_input_stream(struct stream_in *in) |
| { |
| pthread_mutex_lock(&in->pre_lock); |
| pthread_mutex_lock(&in->lock); |
| pthread_mutex_unlock(&in->pre_lock); |
| } |
| |
| void lock_output_stream(struct stream_out *out) |
| { |
| pthread_mutex_lock(&out->pre_lock); |
| pthread_mutex_lock(&out->lock); |
| pthread_mutex_unlock(&out->pre_lock); |
| } |
| |
| /* must be called with out->lock locked */ |
| static int send_offload_cmd_l(struct stream_out* out, int command) |
| { |
| struct offload_cmd *cmd = (struct offload_cmd *)calloc(1, sizeof(struct offload_cmd)); |
| |
| ALOGVV("%s %d", __func__, command); |
| |
| cmd->cmd = command; |
| list_add_tail(&out->offload_cmd_list, &cmd->node); |
| pthread_cond_signal(&out->offload_cond); |
| return 0; |
| } |
| |
| /* must be called iwth out->lock locked */ |
| static void stop_compressed_output_l(struct stream_out *out) |
| { |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| out->send_new_metadata = 1; |
| if (out->compr != NULL) { |
| compress_stop(out->compr); |
| while (out->offload_thread_blocked) { |
| pthread_cond_wait(&out->cond, &out->lock); |
| } |
| } |
| } |
| |
| static void *offload_thread_loop(void *context) |
| { |
| struct stream_out *out = (struct stream_out *) context; |
| struct listnode *item; |
| |
| out->offload_state = OFFLOAD_STATE_IDLE; |
| out->playback_started = 0; |
| |
| setpriority(PRIO_PROCESS, 0, ANDROID_PRIORITY_AUDIO); |
| set_sched_policy(0, SP_FOREGROUND); |
| prctl(PR_SET_NAME, (unsigned long)"Offload Callback", 0, 0, 0); |
| |
| ALOGV("%s", __func__); |
| lock_output_stream(out); |
| for (;;) { |
| struct offload_cmd *cmd = NULL; |
| stream_callback_event_t event; |
| bool send_callback = false; |
| |
| ALOGVV("%s offload_cmd_list %d out->offload_state %d", |
| __func__, list_empty(&out->offload_cmd_list), |
| out->offload_state); |
| if (list_empty(&out->offload_cmd_list)) { |
| ALOGV("%s SLEEPING", __func__); |
| pthread_cond_wait(&out->offload_cond, &out->lock); |
| ALOGV("%s RUNNING", __func__); |
| continue; |
| } |
| |
| item = list_head(&out->offload_cmd_list); |
| cmd = node_to_item(item, struct offload_cmd, node); |
| list_remove(item); |
| |
| ALOGVV("%s STATE %d CMD %d out->compr %p", |
| __func__, out->offload_state, cmd->cmd, out->compr); |
| |
| if (cmd->cmd == OFFLOAD_CMD_EXIT) { |
| free(cmd); |
| break; |
| } |
| |
| if (out->compr == NULL) { |
| ALOGE("%s: Compress handle is NULL", __func__); |
| free(cmd); |
| pthread_cond_signal(&out->cond); |
| continue; |
| } |
| out->offload_thread_blocked = true; |
| pthread_mutex_unlock(&out->lock); |
| send_callback = false; |
| switch(cmd->cmd) { |
| case OFFLOAD_CMD_WAIT_FOR_BUFFER: |
| compress_wait(out->compr, -1); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_WRITE_READY; |
| break; |
| case OFFLOAD_CMD_PARTIAL_DRAIN: |
| compress_next_track(out->compr); |
| compress_partial_drain(out->compr); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| /* Resend the metadata for next iteration */ |
| out->send_new_metadata = 1; |
| break; |
| case OFFLOAD_CMD_DRAIN: |
| compress_drain(out->compr); |
| send_callback = true; |
| event = STREAM_CBK_EVENT_DRAIN_READY; |
| break; |
| case OFFLOAD_CMD_ERROR: |
| send_callback = true; |
| event = STREAM_CBK_EVENT_ERROR; |
| break; |
| default: |
| ALOGE("%s unknown command received: %d", __func__, cmd->cmd); |
| break; |
| } |
| lock_output_stream(out); |
| out->offload_thread_blocked = false; |
| pthread_cond_signal(&out->cond); |
| if (send_callback) { |
| ALOGVV("%s: sending offload_callback event %d", __func__, event); |
| out->offload_callback(event, NULL, out->offload_cookie); |
| } |
| free(cmd); |
| } |
| |
| pthread_cond_signal(&out->cond); |
| while (!list_empty(&out->offload_cmd_list)) { |
| item = list_head(&out->offload_cmd_list); |
| list_remove(item); |
| free(node_to_item(item, struct offload_cmd, node)); |
| } |
| pthread_mutex_unlock(&out->lock); |
| |
| return NULL; |
| } |
| |
| static int create_offload_callback_thread(struct stream_out *out) |
| { |
| pthread_cond_init(&out->offload_cond, (const pthread_condattr_t *) NULL); |
| list_init(&out->offload_cmd_list); |
| pthread_create(&out->offload_thread, (const pthread_attr_t *) NULL, |
| offload_thread_loop, out); |
| return 0; |
| } |
| |
| static int destroy_offload_callback_thread(struct stream_out *out) |
| { |
| lock_output_stream(out); |
| stop_compressed_output_l(out); |
| send_offload_cmd_l(out, OFFLOAD_CMD_EXIT); |
| |
| pthread_mutex_unlock(&out->lock); |
| pthread_join(out->offload_thread, (void **) NULL); |
| pthread_cond_destroy(&out->offload_cond); |
| |
| return 0; |
| } |
| |
| static bool allow_hdmi_channel_config(struct audio_device *adev) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| bool ret = true; |
| |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| /* |
| * If voice call is already existing, do not proceed further to avoid |
| * disabling/enabling both RX and TX devices, CSD calls, etc. |
| * Once the voice call done, the HDMI channels can be configured to |
| * max channels of remaining use cases. |
| */ |
| if (usecase->id == USECASE_VOICE_CALL) { |
| ALOGV("%s: voice call is active, no change in HDMI channels", |
| __func__); |
| ret = false; |
| break; |
| } else if (usecase->id == USECASE_AUDIO_PLAYBACK_MULTI_CH) { |
| ALOGV("%s: multi channel playback is active, " |
| "no change in HDMI channels", __func__); |
| ret = false; |
| break; |
| } |
| } |
| } |
| return ret; |
| } |
| |
| static int check_and_set_hdmi_channels(struct audio_device *adev, |
| unsigned int channels) |
| { |
| struct listnode *node; |
| struct audio_usecase *usecase; |
| |
| /* Check if change in HDMI channel config is allowed */ |
| if (!allow_hdmi_channel_config(adev)) |
| return 0; |
| |
| if (channels == adev->cur_hdmi_channels) { |
| ALOGV("%s: Requested channels are same as current", __func__); |
| return 0; |
| } |
| |
| platform_set_hdmi_channels(adev->platform, channels); |
| adev->cur_hdmi_channels = channels; |
| |
| /* |
| * Deroute all the playback streams routed to HDMI so that |
| * the back end is deactivated. Note that backend will not |
| * be deactivated if any one stream is connected to it. |
| */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK && |
| usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| disable_audio_route(adev, usecase); |
| } |
| } |
| |
| /* |
| * Enable all the streams disabled above. Now the HDMI backend |
| * will be activated with new channel configuration |
| */ |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK && |
| usecase->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| enable_audio_route(adev, usecase); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int stop_output_stream(struct stream_out *out) |
| { |
| int i, ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| out->usecase, use_case_table[out->usecase]); |
| uc_info = get_usecase_from_list(adev, out->usecase); |
| if (uc_info == NULL) { |
| ALOGE("%s: Could not find the usecase (%d) in the list", |
| __func__, out->usecase); |
| return -EINVAL; |
| } |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (adev->visualizer_stop_output != NULL) |
| adev->visualizer_stop_output(out->handle, out->pcm_device_id); |
| if (adev->offload_effects_stop_output != NULL) |
| adev->offload_effects_stop_output(out->handle, out->pcm_device_id); |
| } |
| |
| /* 1. Get and set stream specific mixer controls */ |
| disable_audio_route(adev, uc_info); |
| |
| /* 2. Disable the rx device */ |
| disable_snd_device(adev, uc_info->out_snd_device); |
| |
| list_remove(&uc_info->list); |
| free(uc_info); |
| |
| audio_extn_extspk_update(adev->extspk); |
| |
| /* Must be called after removing the usecase from list */ |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) |
| check_and_set_hdmi_channels(adev, DEFAULT_HDMI_OUT_CHANNELS); |
| |
| ALOGV("%s: exit: status(%d)", __func__, ret); |
| return ret; |
| } |
| |
| int start_output_stream(struct stream_out *out) |
| { |
| int ret = 0; |
| struct audio_usecase *uc_info; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s) devices(%#x)", |
| __func__, out->usecase, use_case_table[out->usecase], out->devices); |
| |
| if (out->card_status == CARD_STATUS_OFFLINE || |
| adev->card_status == CARD_STATUS_OFFLINE) { |
| ALOGW("out->card_status or adev->card_status offline, try again"); |
| ret = -EAGAIN; |
| goto error_config; |
| } |
| |
| out->pcm_device_id = platform_get_pcm_device_id(out->usecase, PCM_PLAYBACK); |
| if (out->pcm_device_id < 0) { |
| ALOGE("%s: Invalid PCM device id(%d) for the usecase(%d)", |
| __func__, out->pcm_device_id, out->usecase); |
| ret = -EINVAL; |
| goto error_config; |
| } |
| |
| uc_info = (struct audio_usecase *)calloc(1, sizeof(struct audio_usecase)); |
| uc_info->id = out->usecase; |
| uc_info->type = PCM_PLAYBACK; |
| uc_info->stream.out = out; |
| uc_info->devices = out->devices; |
| uc_info->in_snd_device = SND_DEVICE_NONE; |
| uc_info->out_snd_device = SND_DEVICE_NONE; |
| |
| /* This must be called before adding this usecase to the list */ |
| if (out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) |
| check_and_set_hdmi_channels(adev, out->config.channels); |
| |
| list_add_tail(&adev->usecase_list, &uc_info->list); |
| |
| audio_extn_perf_lock_acquire(); |
| |
| select_devices(adev, out->usecase); |
| |
| audio_extn_extspk_update(adev->extspk); |
| |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d) format(%#x)", |
| __func__, adev->snd_card, out->pcm_device_id, out->config.format); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| out->pcm = NULL; |
| out->compr = compress_open(adev->snd_card, out->pcm_device_id, |
| COMPRESS_IN, &out->compr_config); |
| if (out->compr && !is_compress_ready(out->compr)) { |
| ALOGE("%s: %s", __func__, compress_get_error(out->compr)); |
| compress_close(out->compr); |
| out->compr = NULL; |
| ret = -EIO; |
| goto error_open; |
| } |
| if (out->offload_callback) |
| compress_nonblock(out->compr, out->non_blocking); |
| |
| if (adev->visualizer_start_output != NULL) |
| adev->visualizer_start_output(out->handle, out->pcm_device_id); |
| if (adev->offload_effects_start_output != NULL) |
| adev->offload_effects_start_output(out->handle, out->pcm_device_id); |
| } else if (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP) { |
| if (!pcm_is_ready(out->pcm)) { |
| ALOGE("%s: pcm stream not ready", __func__); |
| goto error_open; |
| } |
| ret = pcm_prepare(out->pcm); |
| if (ret < 0) { |
| ALOGE("%s: MMAP pcm_prepare failed ret %d", __func__, ret); |
| goto error_open; } |
| ret = pcm_start(out->pcm); |
| if (ret < 0) { |
| ALOGE("%s: MMAP pcm_start failed ret %d", __func__, ret); |
| goto error_open; |
| } |
| } else { |
| unsigned int flags = PCM_OUT; |
| unsigned int pcm_open_retry_count = 0; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_AFE_PROXY) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| pcm_open_retry_count = PROXY_OPEN_RETRY_COUNT; |
| } else if (out->realtime) { |
| flags |= PCM_MMAP | PCM_NOIRQ; |
| } else |
| flags |= PCM_MONOTONIC; |
| |
| while (1) { |
| out->pcm = pcm_open(adev->snd_card, out->pcm_device_id, |
| flags, &out->config); |
| if (out->pcm == NULL || !pcm_is_ready(out->pcm)) { |
| ALOGE("%s: %s", __func__, pcm_get_error(out->pcm)); |
| if (out->pcm != NULL) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| if (pcm_open_retry_count-- == 0) { |
| ret = -EIO; |
| goto error_open; |
| } |
| usleep(PROXY_OPEN_WAIT_TIME * 1000); |
| continue; |
| } |
| break; |
| } |
| ALOGV("%s: pcm_prepare", __func__); |
| if (pcm_is_ready(out->pcm)) { |
| ret = pcm_prepare(out->pcm); |
| if (ret < 0) { |
| ALOGE("%s: pcm_prepare returned %d", __func__, ret); |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| goto error_open; |
| } |
| } |
| if (out->realtime) { |
| ret = pcm_start(out->pcm); |
| if (ret < 0) { |
| ALOGE("%s: RT pcm_start failed ret %d", __func__, ret); |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| goto error_open; |
| } |
| } |
| } |
| register_out_stream(out); |
| audio_extn_perf_lock_release(); |
| audio_extn_tfa_98xx_enable_speaker(); |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| error_open: |
| audio_extn_perf_lock_release(); |
| stop_output_stream(out); |
| error_config: |
| return ret; |
| } |
| |
| static int check_input_parameters(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count) |
| { |
| if ((format != AUDIO_FORMAT_PCM_16_BIT) && (format != AUDIO_FORMAT_PCM_8_24_BIT)) { |
| ALOGE("%s: unsupported AUDIO FORMAT (%d) ", __func__, format); |
| return -EINVAL; |
| } |
| |
| if ((channel_count < MIN_CHANNEL_COUNT) || (channel_count > MAX_CHANNEL_COUNT)) { |
| ALOGE("%s: unsupported channel count (%d) passed Min / Max (%d / %d)", __func__, |
| channel_count, MIN_CHANNEL_COUNT, MAX_CHANNEL_COUNT); |
| return -EINVAL; |
| } |
| |
| switch (sample_rate) { |
| case 8000: |
| case 11025: |
| case 12000: |
| case 16000: |
| case 22050: |
| case 24000: |
| case 32000: |
| case 44100: |
| case 48000: |
| break; |
| default: |
| ALOGE("%s: unsupported (%d) samplerate passed ", __func__, sample_rate); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static size_t get_input_buffer_size(uint32_t sample_rate, |
| audio_format_t format, |
| int channel_count, |
| bool is_low_latency) |
| { |
| size_t size = 0; |
| |
| if (check_input_parameters(sample_rate, format, channel_count) != 0) |
| return 0; |
| |
| size = (sample_rate * AUDIO_CAPTURE_PERIOD_DURATION_MSEC) / 1000; |
| if (is_low_latency) |
| size = configured_low_latency_capture_period_size; |
| |
| size *= channel_count * audio_bytes_per_sample(format); |
| |
| /* make sure the size is multiple of 32 bytes |
| * At 48 kHz mono 16-bit PCM: |
| * 5.000 ms = 240 frames = 15*16*1*2 = 480, a whole multiple of 32 (15) |
| * 3.333 ms = 160 frames = 10*16*1*2 = 320, a whole multiple of 32 (10) |
| */ |
| size += 0x1f; |
| size &= ~0x1f; |
| |
| return size; |
| } |
| |
| static uint32_t out_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->sample_rate; |
| } |
| |
| static int out_set_sample_rate(struct audio_stream *stream __unused, uint32_t rate __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t out_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| return out->compr_config.fragment_size; |
| } |
| return out->config.period_size * out->af_period_multiplier * |
| audio_stream_out_frame_size((const struct audio_stream_out *)stream); |
| } |
| |
| static uint32_t out_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->channel_mask; |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| return out->format; |
| } |
| |
| static int out_set_format(struct audio_stream *stream __unused, audio_format_t format __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int out_standby(struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter: usecase(%d: %s)", __func__, |
| out->usecase, use_case_table[out->usecase]); |
| |
| lock_output_stream(out); |
| if (!out->standby) { |
| if (adev->adm_deregister_stream) |
| adev->adm_deregister_stream(adev->adm_data, out->handle); |
| pthread_mutex_lock(&adev->lock); |
| out->standby = true; |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (out->pcm) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP) { |
| out->playback_started = false; |
| } |
| } else { |
| stop_compressed_output_l(out); |
| out->gapless_mdata.encoder_delay = 0; |
| out->gapless_mdata.encoder_padding = 0; |
| if (out->compr != NULL) { |
| compress_close(out->compr); |
| out->compr = NULL; |
| } |
| } |
| stop_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&out->lock); |
| ALOGV("%s: exit", __func__); |
| return 0; |
| } |
| |
| static int out_on_error(struct audio_stream *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| bool do_standby = false; |
| |
| lock_output_stream(out); |
| if (!out->standby) { |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| stop_compressed_output_l(out); |
| send_offload_cmd_l(out, OFFLOAD_CMD_ERROR); |
| } else |
| do_standby = true; |
| } |
| pthread_mutex_unlock(&out->lock); |
| |
| if (do_standby) |
| return out_standby(&out->stream.common); |
| |
| return 0; |
| } |
| |
| static int out_dump(const struct audio_stream *stream, int fd) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| // We try to get the lock for consistency, |
| // but it isn't necessary for these variables. |
| // If we're not in standby, we may be blocked on a write. |
| const bool locked = (pthread_mutex_trylock(&out->lock) == 0); |
| dprintf(fd, " Standby: %s\n", out->standby ? "yes" : "no"); |
| dprintf(fd, " Frames written: %lld\n", (long long)out->written); |
| |
| if (locked) { |
| log_dump_l(&out->error_log, fd); |
| pthread_mutex_unlock(&out->lock); |
| } else { |
| // We don't have the lock here, copy for safety. |
| struct error_log log = out->error_log; |
| log_dump_l(&log, fd); |
| } |
| return 0; |
| } |
| |
| static int parse_compress_metadata(struct stream_out *out, struct str_parms *parms) |
| { |
| int ret = 0; |
| char value[32]; |
| struct compr_gapless_mdata tmp_mdata; |
| |
| if (!out || !parms) { |
| return -EINVAL; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_DELAY_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| tmp_mdata.encoder_delay = atoi(value); //whats a good limit check? |
| } else { |
| return -EINVAL; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_OFFLOAD_CODEC_PADDING_SAMPLES, value, sizeof(value)); |
| if (ret >= 0) { |
| tmp_mdata.encoder_padding = atoi(value); |
| } else { |
| return -EINVAL; |
| } |
| |
| out->gapless_mdata = tmp_mdata; |
| out->send_new_metadata = 1; |
| ALOGV("%s new encoder delay %u and padding %u", __func__, |
| out->gapless_mdata.encoder_delay, out->gapless_mdata.encoder_padding); |
| |
| return 0; |
| } |
| |
| static bool output_drives_call(struct audio_device *adev, struct stream_out *out) |
| { |
| return out == adev->primary_output || out == adev->voice_tx_output; |
| } |
| |
| static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| struct str_parms *parms; |
| char value[32]; |
| int ret, val = 0; |
| bool select_new_device = false; |
| int status = 0; |
| |
| ALOGD("%s: enter: usecase(%d: %s) kvpairs: %s", |
| __func__, out->usecase, use_case_table[out->usecase], kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value); |
| lock_output_stream(out); |
| pthread_mutex_lock(&adev->lock); |
| |
| /* |
| * When HDMI cable is unplugged the music playback is paused and |
| * the policy manager sends routing=0. But the audioflinger |
| * continues to write data until standby time (3sec). |
| * As the HDMI core is turned off, the write gets blocked. |
| * Avoid this by routing audio to speaker until standby. |
| */ |
| if (out->devices == AUDIO_DEVICE_OUT_AUX_DIGITAL && |
| val == AUDIO_DEVICE_NONE) { |
| val = AUDIO_DEVICE_OUT_SPEAKER; |
| } |
| |
| /* |
| * select_devices() call below switches all the usecases on the same |
| * backend to the new device. Refer to check_and_route_playback_usecases() in |
| * the select_devices(). But how do we undo this? |
| * |
| * For example, music playback is active on headset (deep-buffer usecase) |
| * and if we go to ringtones and select a ringtone, low-latency usecase |
| * will be started on headset+speaker. As we can't enable headset+speaker |
| * and headset devices at the same time, select_devices() switches the music |
| * playback to headset+speaker while starting low-lateny usecase for ringtone. |
| * So when the ringtone playback is completed, how do we undo the same? |
| * |
| * We are relying on the out_set_parameters() call on deep-buffer output, |
| * once the ringtone playback is ended. |
| * NOTE: We should not check if the current devices are same as new devices. |
| * Because select_devices() must be called to switch back the music |
| * playback to headset. |
| */ |
| audio_devices_t new_dev = val; |
| if (new_dev != AUDIO_DEVICE_NONE) { |
| bool same_dev = out->devices == new_dev; |
| out->devices = new_dev; |
| |
| if (output_drives_call(adev, out)) { |
| if (!voice_is_in_call(adev)) { |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| adev->current_call_output = out; |
| ret = voice_start_call(adev); |
| } |
| } else { |
| adev->current_call_output = out; |
| voice_update_devices_for_all_voice_usecases(adev); |
| } |
| } |
| |
| if (!out->standby) { |
| if (!same_dev) { |
| ALOGV("update routing change"); |
| out->routing_change = true; |
| } |
| select_devices(adev, out->usecase); |
| audio_extn_tfa_98xx_update(); |
| } |
| |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&out->lock); |
| |
| /*handles device and call state changes*/ |
| audio_extn_extspk_update(adev->extspk); |
| } |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| parse_compress_metadata(out, parms); |
| } |
| |
| str_parms_destroy(parms); |
| ALOGV("%s: exit: code(%d)", __func__, status); |
| return status; |
| } |
| |
| static char* out_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| char value[256]; |
| struct str_parms *reply = str_parms_create(); |
| size_t i, j; |
| int ret; |
| bool first = true; |
| ALOGV("%s: enter: keys - %s", __func__, keys); |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| while (out->supported_channel_masks[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_channels_name_to_enum_table); j++) { |
| if (out_channels_name_to_enum_table[j].value == out->supported_channel_masks[i]) { |
| if (!first) { |
| strcat(value, "|"); |
| } |
| strcat(value, out_channels_name_to_enum_table[j].name); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value); |
| str = str_parms_to_str(reply); |
| } else { |
| str = strdup(keys); |
| } |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static uint32_t out_get_latency(const struct audio_stream_out *stream) |
| { |
| uint32_t hw_delay, period_ms; |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) |
| return COMPRESS_OFFLOAD_PLAYBACK_LATENCY; |
| else if ((out->realtime) || |
| (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP)) { |
| // since the buffer won't be filled up faster than realtime, |
| // return a smaller number |
| period_ms = (out->af_period_multiplier * out->config.period_size * |
| 1000) / (out->config.rate); |
| hw_delay = platform_render_latency(out->usecase)/1000; |
| return period_ms + hw_delay; |
| } |
| |
| return (out->config.period_count * out->config.period_size * 1000) / |
| (out->config.rate); |
| } |
| |
| static int out_set_volume(struct audio_stream_out *stream, float left, |
| float right) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int volume[2]; |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MULTI_CH) { |
| /* only take left channel into account: the API is for stereo anyway */ |
| out->muted = (left == 0.0f); |
| return 0; |
| } else if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| const char *mixer_ctl_name = "Compress Playback Volume"; |
| struct audio_device *adev = out->dev; |
| struct mixer_ctl *ctl; |
| ctl = mixer_get_ctl_by_name(adev->mixer, mixer_ctl_name); |
| if (!ctl) { |
| /* try with the control based on device id */ |
| int pcm_device_id = platform_get_pcm_device_id(out->usecase, |
| PCM_PLAYBACK); |
| char ctl_name[128] = {0}; |
| snprintf(ctl_name, sizeof(ctl_name), |
| "Compress Playback %d Volume", pcm_device_id); |
| ctl = mixer_get_ctl_by_name(adev->mixer, ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get volume ctl mixer cmd", __func__); |
| return -EINVAL; |
| } |
| } |
| volume[0] = (int)(left * COMPRESS_PLAYBACK_VOLUME_MAX); |
| volume[1] = (int)(right * COMPRESS_PLAYBACK_VOLUME_MAX); |
| mixer_ctl_set_array(ctl, volume, sizeof(volume)/sizeof(volume[0])); |
| return 0; |
| } |
| |
| return -ENOSYS; |
| } |
| |
| // note: this call is safe only if the stream_cb is |
| // removed first in close_output_stream (as is done now). |
| static void out_snd_mon_cb(void * stream, struct str_parms * parms) |
| { |
| if (!stream || !parms) |
| return; |
| |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| card_status_t status; |
| int card; |
| if (parse_snd_card_status(parms, &card, &status) < 0) |
| return; |
| |
| pthread_mutex_lock(&adev->lock); |
| bool valid_cb = (card == adev->snd_card); |
| pthread_mutex_unlock(&adev->lock); |
| |
| if (!valid_cb) |
| return; |
| |
| lock_output_stream(out); |
| if (out->card_status != status) |
| out->card_status = status; |
| pthread_mutex_unlock(&out->lock); |
| |
| ALOGW("out_snd_mon_cb for card %d usecase %s, status %s", card, |
| use_case_table[out->usecase], |
| status == CARD_STATUS_OFFLINE ? "offline" : "online"); |
| |
| if (status == CARD_STATUS_OFFLINE) |
| out_on_error(stream); |
| |
| return; |
| } |
| |
| #ifdef NO_AUDIO_OUT |
| static ssize_t out_write_for_no_output(struct audio_stream_out *stream, |
| const void *buffer __unused, size_t bytes) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| /* No Output device supported other than BT for playback. |
| * Sleep for the amount of buffer duration |
| */ |
| lock_output_stream(out); |
| usleep(bytes * 1000000 / audio_stream_out_frame_size( |
| (const struct audio_stream_out *)&out->stream) / |
| out_get_sample_rate(&out->stream.common)); |
| pthread_mutex_unlock(&out->lock); |
| return bytes; |
| } |
| #endif |
| |
| static ssize_t out_write(struct audio_stream_out *stream, const void *buffer, |
| size_t bytes) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| ssize_t ret = 0; |
| int error_code = ERROR_CODE_STANDBY; |
| |
| lock_output_stream(out); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP) { |
| error_code = ERROR_CODE_WRITE; |
| goto exit; |
| } |
| if (out->standby) { |
| out->standby = false; |
| pthread_mutex_lock(&adev->lock); |
| ret = start_output_stream(out); |
| pthread_mutex_unlock(&adev->lock); |
| /* ToDo: If use case is compress offload should return 0 */ |
| if (ret != 0) { |
| out->standby = true; |
| goto exit; |
| } |
| |
| if (last_known_cal_step != -1) { |
| ALOGD("%s: retry previous failed cal level set", __func__); |
| audio_hw_send_gain_dep_calibration(last_known_cal_step); |
| } |
| } |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| ALOGVV("%s: writing buffer (%zu bytes) to compress device", __func__, bytes); |
| if (out->send_new_metadata) { |
| ALOGVV("send new gapless metadata"); |
| compress_set_gapless_metadata(out->compr, &out->gapless_mdata); |
| out->send_new_metadata = 0; |
| } |
| unsigned int avail; |
| struct timespec tstamp; |
| ret = compress_get_hpointer(out->compr, &avail, &tstamp); |
| /* Do not limit write size if the available frames count is unknown */ |
| if (ret != 0) { |
| avail = bytes; |
| } |
| if (avail == 0) { |
| ret = 0; |
| } else { |
| if (avail > bytes) { |
| avail = bytes; |
| } |
| ret = compress_write(out->compr, buffer, avail); |
| ALOGVV("%s: writing buffer (%d bytes) to compress device returned %zd", |
| __func__, avail, ret); |
| } |
| |
| if (ret >= 0 && ret < (ssize_t)bytes) { |
| send_offload_cmd_l(out, OFFLOAD_CMD_WAIT_FOR_BUFFER); |
| } |
| if (ret > 0 && !out->playback_started) { |
| compress_start(out->compr); |
| out->playback_started = 1; |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| } |
| if (ret < 0) { |
| log_error_l(&out->error_log, ERROR_CODE_WRITE); |
| } |
| pthread_mutex_unlock(&out->lock); |
| return ret; |
| } else { |
| error_code = ERROR_CODE_WRITE; |
| if (out->pcm) { |
| if (out->muted) |
| memset((void *)buffer, 0, bytes); |
| |
| ALOGVV("%s: writing buffer (%zu bytes) to pcm device", __func__, bytes); |
| |
| long ns = pcm_bytes_to_frames(out->pcm, bytes)*1000000000LL/ |
| out->config.rate; |
| request_out_focus(out, ns); |
| |
| bool use_mmap = is_mmap_usecase(out->usecase) || out->realtime; |
| if (use_mmap) |
| ret = pcm_mmap_write(out->pcm, (void *)buffer, bytes); |
| else |
| ret = pcm_write(out->pcm, (void *)buffer, bytes); |
| |
| release_out_focus(out, ns); |
| } else { |
| LOG_ALWAYS_FATAL("out->pcm is NULL after starting output stream"); |
| } |
| } |
| |
| exit: |
| // For PCM we always consume the buffer and return #bytes regardless of ret. |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| out->written += bytes / (out->config.channels * sizeof(short)); |
| } |
| long long sleeptime_us = 0; |
| if (ret != 0) { |
| log_error_l(&out->error_log, error_code); |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| ALOGE_IF(out->pcm != NULL, |
| "%s: error %zd - %s", __func__, ret, pcm_get_error(out->pcm)); |
| sleeptime_us = bytes * 1000000LL / audio_stream_out_frame_size(stream) / |
| out_get_sample_rate(&out->stream.common); |
| // usleep not guaranteed for values over 1 second but we don't limit here. |
| } |
| } |
| |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| out_on_error(&out->stream.common); |
| if (sleeptime_us != 0) |
| usleep(sleeptime_us); |
| } |
| return bytes; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out *stream, |
| uint32_t *dsp_frames) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| *dsp_frames = 0; |
| if ((out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) && (dsp_frames != NULL)) { |
| lock_output_stream(out); |
| if (out->compr != NULL) { |
| unsigned long frames = 0; |
| // TODO: check return value |
| compress_get_tstamp(out->compr, &frames, &out->sample_rate); |
| *dsp_frames = (uint32_t)frames; |
| ALOGVV("%s rendered frames %d sample_rate %d", |
| __func__, *dsp_frames, out->sample_rate); |
| } |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } else |
| return -EINVAL; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream *stream __unused, |
| effect_handle_t effect __unused) |
| { |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream *stream __unused, |
| effect_handle_t effect __unused) |
| { |
| return 0; |
| } |
| |
| static int out_get_next_write_timestamp(const struct audio_stream_out *stream __unused, |
| int64_t *timestamp __unused) |
| { |
| return -EINVAL; |
| } |
| |
| static int out_get_presentation_position(const struct audio_stream_out *stream, |
| uint64_t *frames, struct timespec *timestamp) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int ret = -EINVAL; |
| unsigned long dsp_frames; |
| |
| lock_output_stream(out); |
| |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| if (out->compr != NULL) { |
| // TODO: check return value |
| compress_get_tstamp(out->compr, &dsp_frames, |
| &out->sample_rate); |
| ALOGVV("%s rendered frames %ld sample_rate %d", |
| __func__, dsp_frames, out->sample_rate); |
| *frames = dsp_frames; |
| ret = 0; |
| /* this is the best we can do */ |
| clock_gettime(CLOCK_MONOTONIC, timestamp); |
| } |
| } else { |
| if (out->pcm) { |
| unsigned int avail; |
| if (pcm_get_htimestamp(out->pcm, &avail, timestamp) == 0) { |
| size_t kernel_buffer_size = out->config.period_size * out->config.period_count; |
| int64_t signed_frames = out->written - kernel_buffer_size + avail; |
| // This adjustment accounts for buffering after app processor. |
| // It is based on estimated DSP latency per use case, rather than exact. |
| signed_frames -= |
| (platform_render_latency(out->usecase) * out->sample_rate / 1000000LL); |
| |
| // It would be unusual for this value to be negative, but check just in case ... |
| if (signed_frames >= 0) { |
| *frames = signed_frames; |
| ret = 0; |
| } |
| } |
| } |
| } |
| |
| pthread_mutex_unlock(&out->lock); |
| |
| return ret; |
| } |
| |
| static int out_set_callback(struct audio_stream_out *stream, |
| stream_callback_t callback, void *cookie) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| |
| ALOGV("%s", __func__); |
| lock_output_stream(out); |
| out->offload_callback = callback; |
| out->offload_cookie = cookie; |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } |
| |
| static int out_pause(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| lock_output_stream(out); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PLAYING) { |
| status = compress_pause(out->compr); |
| out->offload_state = OFFLOAD_STATE_PAUSED; |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_resume(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| status = 0; |
| lock_output_stream(out); |
| if (out->compr != NULL && out->offload_state == OFFLOAD_STATE_PAUSED) { |
| status = compress_resume(out->compr); |
| out->offload_state = OFFLOAD_STATE_PLAYING; |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_drain(struct audio_stream_out* stream, audio_drain_type_t type ) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| int status = -ENOSYS; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| lock_output_stream(out); |
| if (type == AUDIO_DRAIN_EARLY_NOTIFY) |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_PARTIAL_DRAIN); |
| else |
| status = send_offload_cmd_l(out, OFFLOAD_CMD_DRAIN); |
| pthread_mutex_unlock(&out->lock); |
| } |
| return status; |
| } |
| |
| static int out_flush(struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| ALOGV("%s", __func__); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| lock_output_stream(out); |
| stop_compressed_output_l(out); |
| pthread_mutex_unlock(&out->lock); |
| return 0; |
| } |
| return -ENOSYS; |
| } |
| |
| static int out_stop(const struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int ret = -ENOSYS; |
| |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&adev->lock); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP && !out->standby && |
| out->playback_started && out->pcm != NULL) { |
| pcm_stop(out->pcm); |
| ret = stop_output_stream(out); |
| if (ret == 0) { |
| out->playback_started = false; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int out_start(const struct audio_stream_out* stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int ret = -ENOSYS; |
| |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&adev->lock); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_MMAP && !out->standby && |
| !out->playback_started && out->pcm != NULL) { |
| ret = start_output_stream(out); |
| if (ret == 0) { |
| out->playback_started = true; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int out_create_mmap_buffer(const struct audio_stream_out *stream, |
| int32_t min_size_frames, |
| struct audio_mmap_buffer_info *info) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| int ret = 0; |
| unsigned int offset1; |
| unsigned int frames1; |
| const char *step = ""; |
| |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&adev->lock); |
| |
| if (info == NULL || min_size_frames == 0) { |
| ret = -EINVAL; |
| goto exit; |
| } |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_MMAP || !out->standby) { |
| ret = -ENOSYS; |
| goto exit; |
| } |
| out->pcm_device_id = platform_get_pcm_device_id(out->usecase, PCM_PLAYBACK); |
| if (out->pcm_device_id < 0) { |
| ALOGE("%s: Invalid PCM device id(%d) for the usecase(%d)", |
| __func__, out->pcm_device_id, out->usecase); |
| ret = -EINVAL; |
| goto exit; |
| } |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d), channels %d", |
| __func__, adev->snd_card, out->pcm_device_id, out->config.channels); |
| out->pcm = pcm_open(adev->snd_card, out->pcm_device_id, |
| (PCM_OUT | PCM_MMAP | PCM_NOIRQ | PCM_MONOTONIC), &out->config); |
| if (out->pcm == NULL || !pcm_is_ready(out->pcm)) { |
| step = "open"; |
| ret = -ENODEV; |
| goto exit; |
| } |
| ret = pcm_mmap_begin(out->pcm, &info->shared_memory_address, &offset1, &frames1); |
| if (ret < 0) { |
| step = "begin"; |
| goto exit; |
| } |
| info->buffer_size_frames = pcm_get_buffer_size(out->pcm); |
| info->burst_size_frames = out->config.period_size; |
| info->shared_memory_fd = pcm_get_poll_fd(out->pcm); |
| |
| memset(info->shared_memory_address, 0, pcm_frames_to_bytes(out->pcm, |
| info->buffer_size_frames)); |
| |
| ret = pcm_mmap_commit(out->pcm, 0, MMAP_PERIOD_SIZE); |
| if (ret < 0) { |
| step = "commit"; |
| goto exit; |
| } |
| ret = 0; |
| |
| ALOGV("%s: got mmap buffer address %p info->buffer_size_frames %d", |
| __func__, info->shared_memory_address, info->buffer_size_frames); |
| |
| exit: |
| if (ret != 0) { |
| ALOGE("%s: %s %s", __func__, step, pcm_get_error(out->pcm)); |
| if (out->pcm != NULL) { |
| pcm_close(out->pcm); |
| out->pcm = NULL; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int out_get_mmap_position(const struct audio_stream_out *stream, |
| struct audio_mmap_position *position) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| ALOGVV("%s", __func__); |
| if (position == NULL) { |
| return -EINVAL; |
| } |
| if (out->usecase != USECASE_AUDIO_PLAYBACK_MMAP) { |
| return -ENOSYS; |
| } |
| if (out->pcm == NULL) { |
| return -ENOSYS; |
| } |
| |
| struct timespec ts = { 0, 0 }; |
| int ret = pcm_mmap_get_hw_ptr(out->pcm, (unsigned int *)&position->position_frames, &ts); |
| if (ret < 0) { |
| ALOGE("%s: %s", __func__, pcm_get_error(out->pcm)); |
| return ret; |
| } |
| position->time_nanoseconds = ts2ns(&ts); |
| return 0; |
| } |
| |
| |
| /** audio_stream_in implementation **/ |
| static uint32_t in_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->config.rate; |
| } |
| |
| static int in_set_sample_rate(struct audio_stream *stream __unused, uint32_t rate __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static size_t in_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->config.period_size * in->af_period_multiplier * |
| audio_stream_in_frame_size((const struct audio_stream_in *)stream); |
| } |
| |
| static uint32_t in_get_channels(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| |
| return in->channel_mask; |
| } |
| |
| static audio_format_t in_get_format(const struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| return in->format; |
| } |
| |
| static int in_set_format(struct audio_stream *stream __unused, audio_format_t format __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int in_standby(struct audio_stream *stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int status = 0; |
| ALOGV("%s: enter", __func__); |
| |
| lock_input_stream(in); |
| |
| if (!in->standby && in->is_st_session) { |
| ALOGV("%s: sound trigger pcm stop lab", __func__); |
| audio_extn_sound_trigger_stop_lab(in); |
| in->standby = true; |
| } |
| |
| if (!in->standby) { |
| if (adev->adm_deregister_stream) |
| adev->adm_deregister_stream(adev->adm_data, in->capture_handle); |
| |
| pthread_mutex_lock(&adev->lock); |
| in->standby = true; |
| if (in->usecase == USECASE_AUDIO_RECORD_MMAP) { |
| in->capture_started = false; |
| } |
| if (in->pcm) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| adev->enable_voicerx = false; |
| platform_set_echo_reference(adev, false, AUDIO_DEVICE_NONE ); |
| status = stop_input_stream(in); |
| pthread_mutex_unlock(&adev->lock); |
| } |
| pthread_mutex_unlock(&in->lock); |
| ALOGV("%s: exit: status(%d)", __func__, status); |
| return status; |
| } |
| |
| static int in_dump(const struct audio_stream *stream __unused, int fd __unused) |
| { |
| return 0; |
| } |
| |
| static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int ret, val = 0; |
| int status = 0; |
| |
| ALOGV("%s: enter: kvpairs=%s", __func__, kvpairs); |
| parms = str_parms_create_str(kvpairs); |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_INPUT_SOURCE, value, sizeof(value)); |
| |
| lock_input_stream(in); |
| |
| pthread_mutex_lock(&adev->lock); |
| if (ret >= 0) { |
| val = atoi(value); |
| /* no audio source uses val == 0 */ |
| if ((in->source != val) && (val != 0)) { |
| in->source = val; |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| |
| if (ret >= 0) { |
| val = atoi(value); |
| if (((int)in->device != val) && (val != 0)) { |
| in->device = val; |
| /* If recording is in progress, change the tx device to new device */ |
| if (!in->standby) { |
| ALOGV("update input routing change"); |
| in->routing_change = true; |
| select_devices(adev, in->usecase); |
| } |
| } |
| } |
| |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| str_parms_destroy(parms); |
| ALOGV("%s: exit: status(%d)", __func__, status); |
| return status; |
| } |
| |
| static char* in_get_parameters(const struct audio_stream *stream __unused, |
| const char *keys __unused) |
| { |
| return strdup(""); |
| } |
| |
| static int in_set_gain(struct audio_stream_in *stream __unused, float gain __unused) |
| { |
| return 0; |
| } |
| |
| static void in_snd_mon_cb(void * stream, struct str_parms * parms) |
| { |
| if (!stream || !parms) |
| return; |
| |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| |
| card_status_t status; |
| int card; |
| if (parse_snd_card_status(parms, &card, &status) < 0) |
| return; |
| |
| pthread_mutex_lock(&adev->lock); |
| bool valid_cb = (card == adev->snd_card); |
| pthread_mutex_unlock(&adev->lock); |
| |
| if (!valid_cb) |
| return; |
| |
| lock_input_stream(in); |
| if (in->card_status != status) |
| in->card_status = status; |
| pthread_mutex_unlock(&in->lock); |
| |
| ALOGW("in_snd_mon_cb for card %d usecase %s, status %s", card, |
| use_case_table[in->usecase], |
| status == CARD_STATUS_OFFLINE ? "offline" : "online"); |
| |
| // a better solution would be to report error back to AF and let |
| // it put the stream to standby |
| if (status == CARD_STATUS_OFFLINE) |
| in_standby(&in->stream.common); |
| |
| return; |
| } |
| |
| static ssize_t in_read(struct audio_stream_in *stream, void *buffer, |
| size_t bytes) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int i, ret = -1; |
| int *int_buf_stream = NULL; |
| |
| lock_input_stream(in); |
| |
| if (in->is_st_session) { |
| ALOGVV(" %s: reading on st session bytes=%zu", __func__, bytes); |
| /* Read from sound trigger HAL */ |
| audio_extn_sound_trigger_read(in, buffer, bytes); |
| pthread_mutex_unlock(&in->lock); |
| return bytes; |
| } |
| |
| if (in->usecase == USECASE_AUDIO_RECORD_MMAP) { |
| ret = -ENOSYS; |
| goto exit; |
| } |
| |
| if (in->standby) { |
| pthread_mutex_lock(&adev->lock); |
| ret = start_input_stream(in); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) { |
| goto exit; |
| } |
| in->standby = 0; |
| } |
| |
| //what's the duration requested by the client? |
| long ns = pcm_bytes_to_frames(in->pcm, bytes)*1000000000LL/ |
| in->config.rate; |
| request_in_focus(in, ns); |
| |
| bool use_mmap = is_mmap_usecase(in->usecase) || in->realtime; |
| if (in->pcm) { |
| if (use_mmap) { |
| ret = pcm_mmap_read(in->pcm, buffer, bytes); |
| } else { |
| ret = pcm_read(in->pcm, buffer, bytes); |
| } |
| if (ret < 0) { |
| ALOGE("Failed to read w/err %s", strerror(errno)); |
| ret = -errno; |
| } |
| if (!ret && bytes > 0 && (in->format == AUDIO_FORMAT_PCM_8_24_BIT)) { |
| if (bytes % 4 == 0) { |
| /* data from DSP comes in 24_8 format, convert it to 8_24 */ |
| int_buf_stream = buffer; |
| for (size_t itt=0; itt < bytes/4 ; itt++) { |
| int_buf_stream[itt] >>= 8; |
| } |
| } else { |
| ALOGE("%s: !!! something wrong !!! ... data not 32 bit aligned ", __func__); |
| ret = -EINVAL; |
| goto exit; |
| } |
| } |
| } |
| |
| release_in_focus(in, ns); |
| |
| /* |
| * Instead of writing zeroes here, we could trust the hardware |
| * to always provide zeroes when muted. |
| * No need to acquire adev->lock to read mic_muted here as we don't change its state. |
| */ |
| if (ret == 0 && adev->mic_muted && in->usecase != USECASE_AUDIO_RECORD_AFE_PROXY) |
| memset(buffer, 0, bytes); |
| |
| exit: |
| pthread_mutex_unlock(&in->lock); |
| |
| if (ret != 0) { |
| in_standby(&in->stream.common); |
| ALOGV("%s: read failed - sleeping for buffer duration", __func__); |
| usleep(bytes * 1000000 / audio_stream_in_frame_size(stream) / |
| in_get_sample_rate(&in->stream.common)); |
| memset(buffer, 0, bytes); // clear return data |
| } |
| if (bytes > 0) { |
| in->frames_read += bytes / audio_stream_in_frame_size(stream); |
| } |
| return bytes; |
| } |
| |
| static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream __unused) |
| { |
| return 0; |
| } |
| |
| static int in_get_capture_position(const struct audio_stream_in *stream, |
| int64_t *frames, int64_t *time) |
| { |
| if (stream == NULL || frames == NULL || time == NULL) { |
| return -EINVAL; |
| } |
| struct stream_in *in = (struct stream_in *)stream; |
| int ret = -ENOSYS; |
| |
| lock_input_stream(in); |
| if (in->pcm) { |
| struct timespec timestamp; |
| unsigned int avail; |
| if (pcm_get_htimestamp(in->pcm, &avail, ×tamp) == 0) { |
| *frames = in->frames_read + avail; |
| *time = timestamp.tv_sec * 1000000000LL + timestamp.tv_nsec; |
| ret = 0; |
| } |
| } |
| pthread_mutex_unlock(&in->lock); |
| return ret; |
| } |
| |
| static int add_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect, |
| bool enable) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int status = 0; |
| effect_descriptor_t desc; |
| |
| status = (*effect)->get_descriptor(effect, &desc); |
| if (status != 0) |
| return status; |
| |
| lock_input_stream(in); |
| pthread_mutex_lock(&in->dev->lock); |
| if ((in->source == AUDIO_SOURCE_VOICE_COMMUNICATION || |
| in->source == AUDIO_SOURCE_VOICE_RECOGNITION || |
| adev->mode == AUDIO_MODE_IN_COMMUNICATION) && |
| in->enable_aec != enable && |
| (memcmp(&desc.type, FX_IID_AEC, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_aec = enable; |
| if (!enable) |
| platform_set_echo_reference(in->dev, enable, AUDIO_DEVICE_NONE); |
| if (in->source == AUDIO_SOURCE_VOICE_COMMUNICATION || |
| adev->mode == AUDIO_MODE_IN_COMMUNICATION) { |
| adev->enable_voicerx = enable; |
| struct audio_usecase *usecase; |
| struct listnode *node; |
| list_for_each(node, &adev->usecase_list) { |
| usecase = node_to_item(node, struct audio_usecase, list); |
| if (usecase->type == PCM_PLAYBACK) { |
| select_devices(adev, usecase->id); |
| break; |
| } |
| } |
| } |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| if (in->enable_ns != enable && |
| (memcmp(&desc.type, FX_IID_NS, sizeof(effect_uuid_t)) == 0)) { |
| in->enable_ns = enable; |
| if (!in->standby) |
| select_devices(in->dev, in->usecase); |
| } |
| pthread_mutex_unlock(&in->dev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| return 0; |
| } |
| |
| static int in_add_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, true); |
| } |
| |
| static int in_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| ALOGV("%s: effect %p", __func__, effect); |
| return add_remove_audio_effect(stream, effect, false); |
| } |
| |
| static int in_stop(const struct audio_stream_in* stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| |
| int ret = -ENOSYS; |
| ALOGV("%s", __func__); |
| pthread_mutex_lock(&adev->lock); |
| if (in->usecase == USECASE_AUDIO_RECORD_MMAP && !in->standby && |
| in->capture_started && in->pcm != NULL) { |
| pcm_stop(in->pcm); |
| ret = stop_input_stream(in); |
| if (ret == 0) { |
| in->capture_started = false; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int in_start(const struct audio_stream_in* stream) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int ret = -ENOSYS; |
| |
| ALOGV("%s in %p", __func__, in); |
| pthread_mutex_lock(&adev->lock); |
| if (in->usecase == USECASE_AUDIO_RECORD_MMAP && !in->standby && |
| !in->capture_started && in->pcm != NULL) { |
| if (!in->capture_started) { |
| ret = start_input_stream(in); |
| if (ret == 0) { |
| in->capture_started = true; |
| } |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int in_create_mmap_buffer(const struct audio_stream_in *stream, |
| int32_t min_size_frames, |
| struct audio_mmap_buffer_info *info) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| struct audio_device *adev = in->dev; |
| int ret = 0; |
| unsigned int offset1; |
| unsigned int frames1; |
| const char *step = ""; |
| |
| pthread_mutex_lock(&adev->lock); |
| ALOGV("%s in %p", __func__, in); |
| if (info == NULL || min_size_frames == 0) { |
| ALOGV("%s invalid argument info %p min_size_frames %d", __func__, info, min_size_frames); |
| ret = -EINVAL; |
| goto exit; |
| } |
| if (in->usecase != USECASE_AUDIO_RECORD_MMAP || !in->standby) { |
| ALOGV("%s in %p", __func__, in); |
| ret = -ENOSYS; |
| goto exit; |
| } |
| in->pcm_device_id = platform_get_pcm_device_id(in->usecase, PCM_CAPTURE); |
| if (in->pcm_device_id < 0) { |
| ALOGE("%s: Invalid PCM device id(%d) for the usecase(%d)", |
| __func__, in->pcm_device_id, in->usecase); |
| ret = -EINVAL; |
| goto exit; |
| } |
| ALOGV("%s: Opening PCM device card_id(%d) device_id(%d), channels %d", |
| __func__, adev->snd_card, in->pcm_device_id, in->config.channels); |
| in->pcm = pcm_open(adev->snd_card, in->pcm_device_id, |
| (PCM_IN | PCM_MMAP | PCM_NOIRQ | PCM_MONOTONIC), &in->config); |
| if (in->pcm == NULL || !pcm_is_ready(in->pcm)) { |
| step = "open"; |
| ret = -ENODEV; |
| goto exit; |
| } |
| |
| ret = pcm_mmap_begin(in->pcm, &info->shared_memory_address, &offset1, &frames1); |
| if (ret < 0) { |
| step = "begin"; |
| goto exit; |
| } |
| info->buffer_size_frames = pcm_get_buffer_size(in->pcm); |
| info->burst_size_frames = in->config.period_size; |
| info->shared_memory_fd = pcm_get_poll_fd(in->pcm); |
| |
| memset(info->shared_memory_address, 0, pcm_frames_to_bytes(in->pcm, |
| info->buffer_size_frames)); |
| |
| ret = pcm_mmap_commit(in->pcm, 0, MMAP_PERIOD_SIZE); |
| if (ret < 0) { |
| step = "commit"; |
| goto exit; |
| } |
| |
| ALOGV("%s: got mmap buffer address %p info->buffer_size_frames %d", |
| __func__, info->shared_memory_address, info->buffer_size_frames); |
| ret = 0; |
| |
| exit: |
| if (ret != 0) { |
| ALOGE("%s: %s %s", __func__, step, pcm_get_error(in->pcm)); |
| if (in->pcm != NULL) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return ret; |
| } |
| |
| static int in_get_mmap_position(const struct audio_stream_in *stream, |
| struct audio_mmap_position *position) |
| { |
| struct stream_in *in = (struct stream_in *)stream; |
| ALOGVV("%s", __func__); |
| if (position == NULL) { |
| return -EINVAL; |
| } |
| if (in->usecase != USECASE_AUDIO_RECORD_MMAP) { |
| return -ENOSYS; |
| } |
| if (in->pcm == NULL) { |
| return -ENOSYS; |
| } |
| struct timespec ts = { 0, 0 }; |
| int ret = pcm_mmap_get_hw_ptr(in->pcm, (unsigned int *)&position->position_frames, &ts); |
| if (ret < 0) { |
| ALOGE("%s: %s", __func__, pcm_get_error(in->pcm)); |
| return ret; |
| } |
| position->time_nanoseconds = ts2ns(&ts); |
| return 0; |
| } |
| |
| |
| static int adev_open_output_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| audio_output_flags_t flags, |
| struct audio_config *config, |
| struct audio_stream_out **stream_out, |
| const char *address __unused) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_out *out; |
| int i, ret; |
| |
| ALOGV("%s: enter: sample_rate(%d) channel_mask(%#x) devices(%#x) flags(%#x)", |
| __func__, config->sample_rate, config->channel_mask, devices, flags); |
| *stream_out = NULL; |
| out = (struct stream_out *)calloc(1, sizeof(struct stream_out)); |
| |
| if (devices == AUDIO_DEVICE_NONE) |
| devices = AUDIO_DEVICE_OUT_SPEAKER; |
| |
| out->flags = flags; |
| out->devices = devices; |
| out->dev = adev; |
| out->format = config->format; |
| out->sample_rate = config->sample_rate; |
| out->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| out->supported_channel_masks[0] = AUDIO_CHANNEL_OUT_STEREO; |
| out->handle = handle; |
| |
| /* Init use case and pcm_config */ |
| if (out->flags & AUDIO_OUTPUT_FLAG_DIRECT && |
| !(out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) && |
| out->devices & AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| pthread_mutex_lock(&adev->lock); |
| ret = read_hdmi_channel_masks(out); |
| pthread_mutex_unlock(&adev->lock); |
| if (ret != 0) |
| goto error_open; |
| |
| if (config->sample_rate == 0) |
| config->sample_rate = DEFAULT_OUTPUT_SAMPLING_RATE; |
| if (config->channel_mask == 0) |
| config->channel_mask = AUDIO_CHANNEL_OUT_5POINT1; |
| if (config->format == AUDIO_FORMAT_DEFAULT) |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| |
| out->channel_mask = config->channel_mask; |
| out->sample_rate = config->sample_rate; |
| out->format = config->format; |
| out->usecase = USECASE_AUDIO_PLAYBACK_MULTI_CH; |
| out->config = pcm_config_hdmi_multi; |
| out->config.rate = config->sample_rate; |
| out->config.channels = audio_channel_count_from_out_mask(out->channel_mask); |
| out->config.period_size = HDMI_MULTI_PERIOD_BYTES / (out->config.channels * 2); |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD) { |
| pthread_mutex_lock(&adev->lock); |
| bool offline = (adev->card_status == CARD_STATUS_OFFLINE); |
| pthread_mutex_unlock(&adev->lock); |
| |
| // reject offload during card offline to allow |
| // fallback to s/w paths |
| if (offline) { |
| ret = -ENODEV; |
| goto error_open; |
| } |
| |
| if (config->offload_info.version != AUDIO_INFO_INITIALIZER.version || |
| config->offload_info.size != AUDIO_INFO_INITIALIZER.size) { |
| ALOGE("%s: Unsupported Offload information", __func__); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| if (!is_supported_format(config->offload_info.format)) { |
| ALOGE("%s: Unsupported audio format", __func__); |
| ret = -EINVAL; |
| goto error_open; |
| } |
| |
| out->compr_config.codec = (struct snd_codec *) |
| calloc(1, sizeof(struct snd_codec)); |
| |
| out->usecase = USECASE_AUDIO_PLAYBACK_OFFLOAD; |
| if (config->offload_info.channel_mask) |
| out->channel_mask = config->offload_info.channel_mask; |
| else if (config->channel_mask) |
| out->channel_mask = config->channel_mask; |
| out->format = config->offload_info.format; |
| out->sample_rate = config->offload_info.sample_rate; |
| |
| out->stream.set_callback = out_set_callback; |
| out->stream.pause = out_pause; |
| out->stream.resume = out_resume; |
| out->stream.drain = out_drain; |
| out->stream.flush = out_flush; |
| |
| out->compr_config.codec->id = |
| get_snd_codec_id(config->offload_info.format); |
| out->compr_config.fragment_size = COMPRESS_OFFLOAD_FRAGMENT_SIZE; |
| out->compr_config.fragments = COMPRESS_OFFLOAD_NUM_FRAGMENTS; |
| out->compr_config.codec->sample_rate = config->offload_info.sample_rate; |
| out->compr_config.codec->bit_rate = |
| config->offload_info.bit_rate; |
| out->compr_config.codec->ch_in = |
| audio_channel_count_from_out_mask(config->channel_mask); |
| out->compr_config.codec->ch_out = out->compr_config.codec->ch_in; |
| |
| if (flags & AUDIO_OUTPUT_FLAG_NON_BLOCKING) |
| out->non_blocking = 1; |
| |
| out->send_new_metadata = 1; |
| create_offload_callback_thread(out); |
| ALOGV("%s: offloaded output offload_info version %04x bit rate %d", |
| __func__, config->offload_info.version, |
| config->offload_info.bit_rate); |
| } else if (out->devices == AUDIO_DEVICE_OUT_TELEPHONY_TX) { |
| if (config->sample_rate == 0) |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| if (config->sample_rate != 48000 && config->sample_rate != 16000 && |
| config->sample_rate != 8000) { |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| ret = -EINVAL; |
| goto error_open; |
| } |
| out->sample_rate = config->sample_rate; |
| out->config.rate = config->sample_rate; |
| if (config->format == AUDIO_FORMAT_DEFAULT) |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| if (config->format != AUDIO_FORMAT_PCM_16_BIT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| ret = -EINVAL; |
| goto error_open; |
| } |
| out->format = config->format; |
| out->usecase = USECASE_AUDIO_PLAYBACK_AFE_PROXY; |
| out->config = pcm_config_afe_proxy_playback; |
| adev->voice_tx_output = out; |
| } else { |
| if (out->flags & AUDIO_OUTPUT_FLAG_DEEP_BUFFER) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_DEEP_BUFFER; |
| out->config = pcm_config_deep_buffer; |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_TTS) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_TTS; |
| out->config = pcm_config_deep_buffer; |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_RAW) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_ULL; |
| out->realtime = may_use_noirq_mode(adev, USECASE_AUDIO_PLAYBACK_ULL, out->flags); |
| out->config = out->realtime ? pcm_config_rt : pcm_config_low_latency; |
| } else if (out->flags & AUDIO_OUTPUT_FLAG_MMAP_NOIRQ) { |
| out->usecase = USECASE_AUDIO_PLAYBACK_MMAP; |
| out->config = pcm_config_mmap_playback; |
| out->stream.start = out_start; |
| out->stream.stop = out_stop; |
| out->stream.create_mmap_buffer = out_create_mmap_buffer; |
| out->stream.get_mmap_position = out_get_mmap_position; |
| } else { |
| out->usecase = USECASE_AUDIO_PLAYBACK_LOW_LATENCY; |
| out->config = pcm_config_low_latency; |
| } |
| if (config->format != audio_format_from_pcm_format(out->config.format)) { |
| if (k_enable_extended_precision |
| && pcm_params_format_test(adev->use_case_table[out->usecase], |
| pcm_format_from_audio_format(config->format))) { |
| out->config.format = pcm_format_from_audio_format(config->format); |
| /* out->format already set to config->format */ |
| } else { |
| /* deny the externally proposed config format |
| * and use the one specified in audio_hw layer configuration. |
| * Note: out->format is returned by out->stream.common.get_format() |
| * and is used to set config->format in the code several lines below. |
| */ |
| out->format = audio_format_from_pcm_format(out->config.format); |
| } |
| } |
| out->sample_rate = out->config.rate; |
| } |
| ALOGV("%s: Usecase(%s) config->format %#x out->config.format %#x\n", |
| __func__, use_case_table[out->usecase], config->format, out->config.format); |
| |
| if (flags & AUDIO_OUTPUT_FLAG_PRIMARY) { |
| if (adev->primary_output == NULL) |
| adev->primary_output = out; |
| else { |
| ALOGE("%s: Primary output is already opened", __func__); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| } |
| |
| /* Check if this usecase is already existing */ |
| pthread_mutex_lock(&adev->lock); |
| if (get_usecase_from_list(adev, out->usecase) != NULL) { |
| ALOGE("%s: Usecase (%d) is already present", __func__, out->usecase); |
| pthread_mutex_unlock(&adev->lock); |
| ret = -EEXIST; |
| goto error_open; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.common.set_sample_rate = out_set_sample_rate; |
| out->stream.common.get_buffer_size = out_get_buffer_size; |
| out->stream.common.get_channels = out_get_channels; |
| out->stream.common.get_format = out_get_format; |
| out->stream.common.set_format = out_set_format; |
| out->stream.common.standby = out_standby; |
| out->stream.common.dump = out_dump; |
| out->stream.common.set_parameters = out_set_parameters; |
| out->stream.common.get_parameters = out_get_parameters; |
| out->stream.common.add_audio_effect = out_add_audio_effect; |
| out->stream.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream.get_latency = out_get_latency; |
| out->stream.set_volume = out_set_volume; |
| #ifdef NO_AUDIO_OUT |
| out->stream.write = out_write_for_no_output; |
| #else |
| out->stream.write = out_write; |
| #endif |
| out->stream.get_render_position = out_get_render_position; |
| out->stream.get_next_write_timestamp = out_get_next_write_timestamp; |
| out->stream.get_presentation_position = out_get_presentation_position; |
| |
| if (out->realtime) |
| out->af_period_multiplier = af_period_multiplier; |
| else |
| out->af_period_multiplier = 1; |
| |
| out->standby = 1; |
| /* out->muted = false; by calloc() */ |
| /* out->written = 0; by calloc() */ |
| |
| pthread_mutex_init(&out->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_mutex_init(&out->pre_lock, (const pthread_mutexattr_t *) NULL); |
| pthread_cond_init(&out->cond, (const pthread_condattr_t *) NULL); |
| |
| config->format = out->stream.common.get_format(&out->stream.common); |
| config->channel_mask = out->stream.common.get_channels(&out->stream.common); |
| config->sample_rate = out->stream.common.get_sample_rate(&out->stream.common); |
| |
| |
| /* |
| By locking output stream before registering, we allow the callback |
| to update stream's state only after stream's initial state is set to |
| adev state. |
| */ |
| lock_output_stream(out); |
| audio_extn_snd_mon_register_listener(out, out_snd_mon_cb); |
| pthread_mutex_lock(&adev->lock); |
| out->card_status = adev->card_status; |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&out->lock); |
| |
| *stream_out = &out->stream; |
| |
| ALOGV("%s: exit", __func__); |
| return 0; |
| |
| error_open: |
| free(out); |
| *stream_out = NULL; |
| ALOGW("%s: exit: ret %d", __func__, ret); |
| return ret; |
| } |
| |
| static void adev_close_output_stream(struct audio_hw_device *dev __unused, |
| struct audio_stream_out *stream) |
| { |
| struct stream_out *out = (struct stream_out *)stream; |
| struct audio_device *adev = out->dev; |
| |
| ALOGV("%s: enter", __func__); |
| |
| // must deregister from sndmonitor first to prevent races |
| // between the callback and close_stream |
| audio_extn_snd_mon_unregister_listener(out); |
| out_standby(&stream->common); |
| if (out->usecase == USECASE_AUDIO_PLAYBACK_OFFLOAD) { |
| destroy_offload_callback_thread(out); |
| |
| if (out->compr_config.codec != NULL) |
| free(out->compr_config.codec); |
| } |
| |
| if (adev->voice_tx_output == out) |
| adev->voice_tx_output = NULL; |
| |
| pthread_cond_destroy(&out->cond); |
| pthread_mutex_destroy(&out->lock); |
| free(stream); |
| ALOGV("%s: exit", __func__); |
| } |
| |
| static int adev_set_parameters(struct audio_hw_device *dev, const char *kvpairs) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int val; |
| int ret; |
| int status = 0; |
| |
| ALOGV("%s: enter: %s", __func__, kvpairs); |
| |
| pthread_mutex_lock(&adev->lock); |
| |
| parms = str_parms_create_str(kvpairs); |
| status = voice_set_parameters(adev, parms); |
| if (status != 0) { |
| goto done; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_NREC, value, sizeof(value)); |
| if (ret >= 0) { |
| /* When set to false, HAL should disable EC and NS */ |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->bluetooth_nrec = true; |
| else |
| adev->bluetooth_nrec = false; |
| } |
| |
| ret = str_parms_get_str(parms, "screen_state", value, sizeof(value)); |
| if (ret >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->screen_off = false; |
| else |
| adev->screen_off = true; |
| } |
| |
| ret = str_parms_get_int(parms, "rotation", &val); |
| if (ret >= 0) { |
| bool reverse_speakers = false; |
| switch(val) { |
| // FIXME: note that the code below assumes that the speakers are in the correct placement |
| // relative to the user when the device is rotated 90deg from its default rotation. This |
| // assumption is device-specific, not platform-specific like this code. |
| case 270: |
| reverse_speakers = true; |
| break; |
| case 0: |
| case 90: |
| case 180: |
| break; |
| default: |
| ALOGE("%s: unexpected rotation of %d", __func__, val); |
| status = -EINVAL; |
| } |
| if (status == 0) { |
| platform_swap_lr_channels(adev, reverse_speakers); |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_SCO_WB, value, sizeof(value)); |
| if (ret >= 0) { |
| adev->bt_wb_speech_enabled = !strcmp(value, AUDIO_PARAMETER_VALUE_ON); |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_CONNECT, value, sizeof(value)); |
| if (ret >= 0) { |
| audio_devices_t device = (audio_devices_t)strtoul(value, NULL, 10); |
| if (device == AUDIO_DEVICE_OUT_USB_DEVICE) { |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| const int card = atoi(value); |
| audio_extn_usb_add_device(AUDIO_DEVICE_OUT_USB_DEVICE, card); |
| } |
| } else if (device == AUDIO_DEVICE_IN_USB_DEVICE) { |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| const int card = atoi(value); |
| audio_extn_usb_add_device(AUDIO_DEVICE_IN_USB_DEVICE, card); |
| } |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_DISCONNECT, value, sizeof(value)); |
| if (ret >= 0) { |
| audio_devices_t device = (audio_devices_t)strtoul(value, NULL, 10); |
| if (device == AUDIO_DEVICE_OUT_USB_DEVICE) { |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| const int card = atoi(value); |
| |
| audio_extn_usb_remove_device(AUDIO_DEVICE_OUT_USB_DEVICE, card); |
| } |
| } else if (device == AUDIO_DEVICE_IN_USB_DEVICE) { |
| ret = str_parms_get_str(parms, "card", value, sizeof(value)); |
| if (ret >= 0) { |
| const int card = atoi(value); |
| audio_extn_usb_remove_device(AUDIO_DEVICE_IN_USB_DEVICE, card); |
| } |
| } |
| } |
| |
| audio_extn_hfp_set_parameters(adev, parms); |
| done: |
| str_parms_destroy(parms); |
| pthread_mutex_unlock(&adev->lock); |
| ALOGV("%s: exit with code(%d)", __func__, status); |
| return status; |
| } |
| |
| static char* adev_get_parameters(const struct audio_hw_device *dev, |
| const char *keys) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct str_parms *reply = str_parms_create(); |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| |
| pthread_mutex_lock(&adev->lock); |
| |
| voice_get_parameters(adev, query, reply); |
| str = str_parms_to_str(reply); |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| |
| pthread_mutex_unlock(&adev->lock); |
| ALOGV("%s: exit: returns - %s", __func__, str); |
| return str; |
| } |
| |
| static int adev_init_check(const struct audio_hw_device *dev __unused) |
| { |
| return 0; |
| } |
| |
| static int adev_set_voice_volume(struct audio_hw_device *dev, float volume) |
| { |
| int ret; |
| struct audio_device *adev = (struct audio_device *)dev; |
| |
| audio_extn_extspk_set_voice_vol(adev->extspk, volume); |
| |
| pthread_mutex_lock(&adev->lock); |
| ret = voice_set_volume(adev, volume); |
| pthread_mutex_unlock(&adev->lock); |
| |
| return ret; |
| } |
| |
| static int adev_set_master_volume(struct audio_hw_device *dev __unused, float volume __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_volume(struct audio_hw_device *dev __unused, |
| float *volume __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_master_mute(struct audio_hw_device *dev __unused, bool muted __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_get_master_mute(struct audio_hw_device *dev __unused, bool *muted __unused) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_mode(struct audio_hw_device *dev, audio_mode_t mode) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (adev->mode != mode) { |
| ALOGD("%s: mode %d", __func__, (int)mode); |
| adev->mode = mode; |
| if ((mode == AUDIO_MODE_NORMAL || mode == AUDIO_MODE_IN_COMMUNICATION) && |
| voice_is_in_call(adev)) { |
| voice_stop_call(adev); |
| adev->current_call_output = NULL; |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| audio_extn_extspk_set_mode(adev->extspk, mode); |
| |
| return 0; |
| } |
| |
| static int adev_set_mic_mute(struct audio_hw_device *dev, bool state) |
| { |
| int ret; |
| struct audio_device *adev = (struct audio_device *)dev; |
| |
| ALOGD("%s: state %d", __func__, (int)state); |
| pthread_mutex_lock(&adev->lock); |
| if (audio_extn_tfa_98xx_is_supported() && adev->enable_hfp) { |
| ret = audio_extn_hfp_set_mic_mute(adev, state); |
| } else { |
| ret = voice_set_mic_mute(adev, state); |
| } |
| adev->mic_muted = state; |
| pthread_mutex_unlock(&adev->lock); |
| |
| return ret; |
| } |
| |
| static int adev_get_mic_mute(const struct audio_hw_device *dev, bool *state) |
| { |
| *state = voice_get_mic_mute((struct audio_device *)dev); |
| return 0; |
| } |
| |
| static size_t adev_get_input_buffer_size(const struct audio_hw_device *dev __unused, |
| const struct audio_config *config) |
| { |
| int channel_count = audio_channel_count_from_in_mask(config->channel_mask); |
| |
| return get_input_buffer_size(config->sample_rate, config->format, channel_count, |
| false /* is_low_latency: since we don't know, be conservative */); |
| } |
| |
| static int adev_open_input_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| struct audio_config *config, |
| struct audio_stream_in **stream_in, |
| audio_input_flags_t flags, |
| const char *address __unused, |
| audio_source_t source ) |
| { |
| struct audio_device *adev = (struct audio_device *)dev; |
| struct stream_in *in; |
| int ret = 0, buffer_size, frame_size; |
| int channel_count = audio_channel_count_from_in_mask(config->channel_mask); |
| bool is_low_latency = false; |
| |
| ALOGV("%s: enter", __func__); |
| *stream_in = NULL; |
| if (check_input_parameters(config->sample_rate, config->format, channel_count) != 0) |
| return -EINVAL; |
| |
| if (audio_extn_tfa_98xx_is_supported() && (audio_extn_hfp_is_active(adev) || voice_is_in_call(adev))) |
| return -EINVAL; |
| |
| in = (struct stream_in *)calloc(1, sizeof(struct stream_in)); |
| |
| pthread_mutex_init(&in->lock, (const pthread_mutexattr_t *) NULL); |
| pthread_mutex_init(&in->pre_lock, (const pthread_mutexattr_t *) NULL); |
| |
| in->stream.common.get_sample_rate = in_get_sample_rate; |
| in->stream.common.set_sample_rate = in_set_sample_rate; |
| in->stream.common.get_buffer_size = in_get_buffer_size; |
| in->stream.common.get_channels = in_get_channels; |
| in->stream.common.get_format = in_get_format; |
| in->stream.common.set_format = in_set_format; |
| in->stream.common.standby = in_standby; |
| in->stream.common.dump = in_dump; |
| in->stream.common.set_parameters = in_set_parameters; |
| in->stream.common.get_parameters = in_get_parameters; |
| in->stream.common.add_audio_effect = in_add_audio_effect; |
| in->stream.common.remove_audio_effect = in_remove_audio_effect; |
| in->stream.set_gain = in_set_gain; |
| in->stream.read = in_read; |
| in->stream.get_input_frames_lost = in_get_input_frames_lost; |
| in->stream.get_capture_position = in_get_capture_position; |
| |
| in->device = devices; |
| in->source = source; |
| in->dev = adev; |
| in->standby = 1; |
| in->channel_mask = config->channel_mask; |
| in->capture_handle = handle; |
| in->flags = flags; |
| |
| // restrict 24 bit capture for unprocessed source only |
| // for other sources if 24 bit requested reject 24 and set 16 bit capture only |
| if (config->format == AUDIO_FORMAT_DEFAULT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| } else if (config->format == AUDIO_FORMAT_PCM_FLOAT || |
| config->format == AUDIO_FORMAT_PCM_24_BIT_PACKED || |
| config->format == AUDIO_FORMAT_PCM_8_24_BIT) { |
| bool ret_error = false; |
| /* 24 bit is restricted to UNPROCESSED source only,also format supported |
| from HAL is 8_24 |
| *> In case of UNPROCESSED source, for 24 bit, if format requested is other than |
| 8_24 return error indicating supported format is 8_24 |
| *> In case of any other source requesting 24 bit or float return error |
| indicating format supported is 16 bit only. |
| |
| on error flinger will retry with supported format passed |
| */ |
| if (source != AUDIO_SOURCE_UNPROCESSED) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| ret_error = true; |
| } else if (config->format != AUDIO_FORMAT_PCM_8_24_BIT) { |
| config->format = AUDIO_FORMAT_PCM_8_24_BIT; |
| ret_error = true; |
| } |
| |
| if (ret_error) { |
| ret = -EINVAL; |
| goto err_open; |
| } |
| } |
| |
| in->format = config->format; |
| |
| /* Update config params with the requested sample rate and channels */ |
| if (in->device == AUDIO_DEVICE_IN_TELEPHONY_RX) { |
| if (config->sample_rate == 0) |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| if (config->sample_rate != 48000 && config->sample_rate != 16000 && |
| config->sample_rate != 8000) { |
| config->sample_rate = AFE_PROXY_SAMPLING_RATE; |
| ret = -EINVAL; |
| goto err_open; |
| } |
| |
| if (config->format != AUDIO_FORMAT_PCM_16_BIT) { |
| config->format = AUDIO_FORMAT_PCM_16_BIT; |
| ret = -EINVAL; |
| goto err_open; |
| } |
| |
| in->usecase = USECASE_AUDIO_RECORD_AFE_PROXY; |
| in->config = pcm_config_afe_proxy_record; |
| } else { |
| in->usecase = USECASE_AUDIO_RECORD; |
| if (config->sample_rate == LOW_LATENCY_CAPTURE_SAMPLE_RATE && |
| (in->flags & AUDIO_INPUT_FLAG_FAST) != 0) { |
| is_low_latency = true; |
| #if LOW_LATENCY_CAPTURE_USE_CASE |
| in->usecase = USECASE_AUDIO_RECORD_LOW_LATENCY; |
| #endif |
| in->realtime = may_use_noirq_mode(adev, in->usecase, in->flags); |
| if (!in->realtime) { |
| in->config = pcm_config_audio_capture; |
| frame_size = audio_stream_in_frame_size(&in->stream); |
| buffer_size = get_input_buffer_size(config->sample_rate, |
| config->format, |
| channel_count, |
| is_low_latency); |
| in->config.period_size = buffer_size / frame_size; |
| in->config.rate = config->sample_rate; |
| in->af_period_multiplier = 1; |
| } else { |
| // period size is left untouched for rt mode playback |
| in->config = pcm_config_audio_capture_rt; |
| in->af_period_multiplier = af_period_multiplier; |
| } |
| } else if ((config->sample_rate == LOW_LATENCY_CAPTURE_SAMPLE_RATE) && |
| ((in->flags & AUDIO_INPUT_FLAG_MMAP_NOIRQ) != 0)) { |
| in->usecase = USECASE_AUDIO_RECORD_MMAP; |
| in->config = pcm_config_mmap_capture; |
| in->stream.start = in_start; |
| in->stream.stop = in_stop; |
| in->stream.create_mmap_buffer = in_create_mmap_buffer; |
| in->stream.get_mmap_position = in_get_mmap_position; |
| in->af_period_multiplier = 1; |
| ALOGV("%s: USECASE_AUDIO_RECORD_MMAP", __func__); |
| } else { |
| in->config = pcm_config_audio_capture; |
| frame_size = audio_stream_in_frame_size(&in->stream); |
| buffer_size = get_input_buffer_size(config->sample_rate, |
| config->format, |
| channel_count, |
| is_low_latency); |
| in->config.period_size = buffer_size / frame_size; |
| in->config.rate = config->sample_rate; |
| in->af_period_multiplier = 1; |
| } |
| if (config->format == AUDIO_FORMAT_PCM_8_24_BIT) |
| in->config.format = PCM_FORMAT_S24_LE; |
| } |
| |
| in->config.channels = channel_count; |
| |
| /* This stream could be for sound trigger lab, |
| get sound trigger pcm if present */ |
| audio_extn_sound_trigger_check_and_get_session(in); |
| |
| lock_input_stream(in); |
| audio_extn_snd_mon_register_listener(in, in_snd_mon_cb); |
| pthread_mutex_lock(&adev->lock); |
| in->card_status = adev->card_status; |
| pthread_mutex_unlock(&adev->lock); |
| pthread_mutex_unlock(&in->lock); |
| |
| *stream_in = &in->stream; |
| ALOGV("%s: exit", __func__); |
| return 0; |
| |
| err_open: |
| free(in); |
| *stream_in = NULL; |
| return ret; |
| } |
| |
| static void adev_close_input_stream(struct audio_hw_device *dev __unused, |
| struct audio_stream_in *stream) |
| { |
| ALOGV("%s", __func__); |
| |
| // must deregister from sndmonitor first to prevent races |
| // between the callback and close_stream |
| audio_extn_snd_mon_unregister_listener(stream); |
| in_standby(&stream->common); |
| free(stream); |
| |
| return; |
| } |
| |
| static int adev_dump(const audio_hw_device_t *device __unused, int fd __unused) |
| { |
| return 0; |
| } |
| |
| /* verifies input and output devices and their capabilities. |
| * |
| * This verification is required when enabling extended bit-depth or |
| * sampling rates, as not all qcom products support it. |
| * |
| * Suitable for calling only on initialization such as adev_open(). |
| * It fills the audio_device use_case_table[] array. |
| * |
| * Has a side-effect that it needs to configure audio routing / devices |
| * in order to power up the devices and read the device parameters. |
| * It does not acquire any hw device lock. Should restore the devices |
| * back to "normal state" upon completion. |
| */ |
| static int adev_verify_devices(struct audio_device *adev) |
| { |
| /* enumeration is a bit difficult because one really wants to pull |
| * the use_case, device id, etc from the hidden pcm_device_table[]. |
| * In this case there are the following use cases and device ids. |
| * |
| * [USECASE_AUDIO_PLAYBACK_DEEP_BUFFER] = {0, 0}, |
| * [USECASE_AUDIO_PLAYBACK_LOW_LATENCY] = {15, 15}, |
| * [USECASE_AUDIO_PLAYBACK_MULTI_CH] = {1, 1}, |
| * [USECASE_AUDIO_PLAYBACK_OFFLOAD] = {9, 9}, |
| * [USECASE_AUDIO_RECORD] = {0, 0}, |
| * [USECASE_AUDIO_RECORD_LOW_LATENCY] = {15, 15}, |
| * [USECASE_VOICE_CALL] = {2, 2}, |
| * |
| * USECASE_AUDIO_PLAYBACK_OFFLOAD, USECASE_AUDIO_PLAYBACK_MULTI_CH omitted. |
| * USECASE_VOICE_CALL omitted, but possible for either input or output. |
| */ |
| |
| /* should be the usecases enabled in adev_open_input_stream() */ |
| static const int test_in_usecases[] = { |
| USECASE_AUDIO_RECORD, |
| USECASE_AUDIO_RECORD_LOW_LATENCY, /* does not appear to be used */ |
| }; |
| /* should be the usecases enabled in adev_open_output_stream()*/ |
| static const int test_out_usecases[] = { |
| USECASE_AUDIO_PLAYBACK_DEEP_BUFFER, |
| USECASE_AUDIO_PLAYBACK_LOW_LATENCY, |
| }; |
| static const usecase_type_t usecase_type_by_dir[] = { |
| PCM_PLAYBACK, |
| PCM_CAPTURE, |
| }; |
| static const unsigned flags_by_dir[] = { |
| PCM_OUT, |
| PCM_IN, |
| }; |
| |
| size_t i; |
| unsigned dir; |
| const unsigned card_id = adev->snd_card; |
| char info[512]; /* for possible debug info */ |
| |
| for (dir = 0; dir < 2; ++dir) { |
| const usecase_type_t usecase_type = usecase_type_by_dir[dir]; |
| const unsigned flags_dir = flags_by_dir[dir]; |
| const size_t testsize = |
| dir ? ARRAY_SIZE(test_in_usecases) : ARRAY_SIZE(test_out_usecases); |
| const int *testcases = |
| dir ? test_in_usecases : test_out_usecases; |
| const audio_devices_t audio_device = |
| dir ? AUDIO_DEVICE_IN_BUILTIN_MIC : AUDIO_DEVICE_OUT_SPEAKER; |
| |
| for (i = 0; i < testsize; ++i) { |
| const audio_usecase_t audio_usecase = testcases[i]; |
| int device_id; |
| snd_device_t snd_device; |
| struct pcm_params **pparams; |
| struct stream_out out; |
| struct stream_in in; |
| struct audio_usecase uc_info; |
| int retval; |
| |
| pparams = &adev->use_case_table[audio_usecase]; |
| pcm_params_free(*pparams); /* can accept null input */ |
| *pparams = NULL; |
| |
| /* find the device ID for the use case (signed, for error) */ |
| device_id = platform_get_pcm_device_id(audio_usecase, usecase_type); |
| if (device_id < 0) |
| continue; |
| |
| /* prepare structures for device probing */ |
| memset(&uc_info, 0, sizeof(uc_info)); |
| uc_info.id = audio_usecase; |
| uc_info.type = usecase_type; |
| if (dir) { |
| adev->active_input = ∈ |
| memset(&in, 0, sizeof(in)); |
| in.device = audio_device; |
| in.source = AUDIO_SOURCE_VOICE_COMMUNICATION; |
| uc_info.stream.in = ∈ |
| } else { |
| adev->active_input = NULL; |
| } |
| memset(&out, 0, sizeof(out)); |
| out.devices = audio_device; /* only field needed in select_devices */ |
| uc_info.stream.out = &out; |
| uc_info.devices = audio_device; |
| uc_info.in_snd_device = SND_DEVICE_NONE; |
| uc_info.out_snd_device = SND_DEVICE_NONE; |
| list_add_tail(&adev->usecase_list, &uc_info.list); |
| |
| /* select device - similar to start_(in/out)put_stream() */ |
| retval = select_devices(adev, audio_usecase); |
| if (retval >= 0) { |
| *pparams = pcm_params_get(card_id, device_id, flags_dir); |
| #if LOG_NDEBUG == 0 |
| if (*pparams) { |
| ALOGV("%s: (%s) card %d device %d", __func__, |
| dir ? "input" : "output", card_id, device_id); |
| pcm_params_to_string(*pparams, info, ARRAY_SIZE(info)); |
| } else { |
| ALOGV("%s: cannot locate card %d device %d", __func__, card_id, device_id); |
| } |
| #endif |
| } |
| |
| /* deselect device - similar to stop_(in/out)put_stream() */ |
| /* 1. Get and set stream specific mixer controls */ |
| retval = disable_audio_route(adev, &uc_info); |
| /* 2. Disable the rx device */ |
| retval = disable_snd_device(adev, |
| dir ? uc_info.in_snd_device : uc_info.out_snd_device); |
| list_remove(&uc_info.list); |
| } |
| } |
| adev->active_input = NULL; /* restore adev state */ |
| return 0; |
| } |
| |
| static int adev_close(hw_device_t *device) |
| { |
| size_t i; |
| struct audio_device *adev = (struct audio_device *)device; |
| |
| if (!adev) |
| return 0; |
| |
| audio_extn_tfa_98xx_deinit(); |
| |
| audio_extn_snd_mon_unregister_listener(adev); |
| pthread_mutex_lock(&adev_init_lock); |
| |
| if ((--audio_device_ref_count) == 0) { |
| audio_route_free(adev->audio_route); |
| free(adev->snd_dev_ref_cnt); |
| platform_deinit(adev->platform); |
| audio_extn_extspk_deinit(adev->extspk); |
| audio_extn_sound_trigger_deinit(adev); |
| for (i = 0; i < ARRAY_SIZE(adev->use_case_table); ++i) { |
| pcm_params_free(adev->use_case_table[i]); |
| } |
| if (adev->adm_deinit) |
| adev->adm_deinit(adev->adm_data); |
| free(device); |
| } |
| |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| return 0; |
| } |
| |
| /* This returns 1 if the input parameter looks at all plausible as a low latency period size, |
| * or 0 otherwise. A return value of 1 doesn't mean the value is guaranteed to work, |
| * just that it _might_ work. |
| */ |
| static int period_size_is_plausible_for_low_latency(int period_size) |
| { |
| switch (period_size) { |
| case 48: |
| case 96: |
| case 144: |
| case 160: |
| case 192: |
| case 240: |
| case 320: |
| case 480: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static void adev_snd_mon_cb(void * stream __unused, struct str_parms * parms) |
| { |
| int card; |
| card_status_t status; |
| |
| if (!parms) |
| return; |
| |
| if (parse_snd_card_status(parms, &card, &status) < 0) |
| return; |
| |
| pthread_mutex_lock(&adev->lock); |
| bool valid_cb = (card == adev->snd_card); |
| if (valid_cb) { |
| if (adev->card_status != status) { |
| adev->card_status = status; |
| platform_snd_card_update(adev->platform, status); |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| return; |
| } |
| |
| static int adev_open(const hw_module_t *module, const char *name, |
| hw_device_t **device) |
| { |
| int i, ret; |
| |
| ALOGD("%s: enter", __func__); |
| if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0) return -EINVAL; |
| pthread_mutex_lock(&adev_init_lock); |
| if (audio_device_ref_count != 0) { |
| *device = &adev->device.common; |
| audio_device_ref_count++; |
| ALOGV("%s: returning existing instance of adev", __func__); |
| ALOGV("%s: exit", __func__); |
| pthread_mutex_unlock(&adev_init_lock); |
| return 0; |
| } |
| adev = calloc(1, sizeof(struct audio_device)); |
| |
| pthread_mutex_init(&adev->lock, (const pthread_mutexattr_t *) NULL); |
| |
| adev->device.common.tag = HARDWARE_DEVICE_TAG; |
| adev->device.common.version = AUDIO_DEVICE_API_VERSION_2_0; |
| adev->device.common.module = (struct hw_module_t *)module; |
| adev->device.common.close = adev_close; |
| |
| adev->device.init_check = adev_init_check; |
| adev->device.set_voice_volume = adev_set_voice_volume; |
| adev->device.set_master_volume = adev_set_master_volume; |
| adev->device.get_master_volume = adev_get_master_volume; |
| adev->device.set_master_mute = adev_set_master_mute; |
| adev->device.get_master_mute = adev_get_master_mute; |
| adev->device.set_mode = adev_set_mode; |
| adev->device.set_mic_mute = adev_set_mic_mute; |
| adev->device.get_mic_mute = adev_get_mic_mute; |
| adev->device.set_parameters = adev_set_parameters; |
| adev->device.get_parameters = adev_get_parameters; |
| adev->device.get_input_buffer_size = adev_get_input_buffer_size; |
| adev->device.open_output_stream = adev_open_output_stream; |
| adev->device.close_output_stream = adev_close_output_stream; |
| adev->device.open_input_stream = adev_open_input_stream; |
| |
| adev->device.close_input_stream = adev_close_input_stream; |
| adev->device.dump = adev_dump; |
| |
| /* Set the default route before the PCM stream is opened */ |
| pthread_mutex_lock(&adev->lock); |
| adev->mode = AUDIO_MODE_NORMAL; |
| adev->active_input = NULL; |
| adev->primary_output = NULL; |
| adev->bluetooth_nrec = true; |
| adev->acdb_settings = TTY_MODE_OFF; |
| /* adev->cur_hdmi_channels = 0; by calloc() */ |
| adev->snd_dev_ref_cnt = calloc(SND_DEVICE_MAX, sizeof(int)); |
| voice_init(adev); |
| list_init(&adev->usecase_list); |
| pthread_mutex_unlock(&adev->lock); |
| |
| /* Loads platform specific libraries dynamically */ |
| adev->platform = platform_init(adev); |
| if (!adev->platform) { |
| free(adev->snd_dev_ref_cnt); |
| free(adev); |
| ALOGE("%s: Failed to init platform data, aborting.", __func__); |
| *device = NULL; |
| pthread_mutex_unlock(&adev_init_lock); |
| return -EINVAL; |
| } |
| adev->extspk = audio_extn_extspk_init(adev); |
| audio_extn_sound_trigger_init(adev); |
| |
| adev->visualizer_lib = dlopen(VISUALIZER_LIBRARY_PATH, RTLD_NOW); |
| if (adev->visualizer_lib == NULL) { |
| ALOGW("%s: DLOPEN failed for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, VISUALIZER_LIBRARY_PATH); |
| adev->visualizer_start_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_start_output"); |
| adev->visualizer_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->visualizer_lib, |
| "visualizer_hal_stop_output"); |
| } |
| |
| adev->offload_effects_lib = dlopen(OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH, RTLD_NOW); |
| if (adev->offload_effects_lib == NULL) { |
| ALOGW("%s: DLOPEN failed for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, |
| OFFLOAD_EFFECTS_BUNDLE_LIBRARY_PATH); |
| adev->offload_effects_start_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_start_output"); |
| adev->offload_effects_stop_output = |
| (int (*)(audio_io_handle_t, int))dlsym(adev->offload_effects_lib, |
| "offload_effects_bundle_hal_stop_output"); |
| } |
| |
| adev->adm_lib = dlopen(ADM_LIBRARY_PATH, RTLD_NOW); |
| if (adev->adm_lib == NULL) { |
| ALOGW("%s: DLOPEN failed for %s", __func__, ADM_LIBRARY_PATH); |
| } else { |
| ALOGV("%s: DLOPEN successful for %s", __func__, ADM_LIBRARY_PATH); |
| adev->adm_init = (adm_init_t) |
| dlsym(adev->adm_lib, "adm_init"); |
| adev->adm_deinit = (adm_deinit_t) |
| dlsym(adev->adm_lib, "adm_deinit"); |
| adev->adm_register_input_stream = (adm_register_input_stream_t) |
| dlsym(adev->adm_lib, "adm_register_input_stream"); |
| adev->adm_register_output_stream = (adm_register_output_stream_t) |
| dlsym(adev->adm_lib, "adm_register_output_stream"); |
| adev->adm_deregister_stream = (adm_deregister_stream_t) |
| dlsym(adev->adm_lib, "adm_deregister_stream"); |
| adev->adm_request_focus = (adm_request_focus_t) |
| dlsym(adev->adm_lib, "adm_request_focus"); |
| adev->adm_abandon_focus = (adm_abandon_focus_t) |
| dlsym(adev->adm_lib, "adm_abandon_focus"); |
| adev->adm_set_config = (adm_set_config_t) |
| dlsym(adev->adm_lib, "adm_set_config"); |
| adev->adm_request_focus_v2 = (adm_request_focus_v2_t) |
| dlsym(adev->adm_lib, "adm_request_focus_v2"); |
| adev->adm_is_noirq_avail = (adm_is_noirq_avail_t) |
| dlsym(adev->adm_lib, "adm_is_noirq_avail"); |
| adev->adm_on_routing_change = (adm_on_routing_change_t) |
| dlsym(adev->adm_lib, "adm_on_routing_change"); |
| } |
| |
| adev->bt_wb_speech_enabled = false; |
| adev->enable_voicerx = false; |
| |
| *device = &adev->device.common; |
| |
| if (k_enable_extended_precision) |
| adev_verify_devices(adev); |
| |
| char value[PROPERTY_VALUE_MAX]; |
| int trial; |
| if (property_get("audio_hal.period_size", value, NULL) > 0) { |
| trial = atoi(value); |
| if (period_size_is_plausible_for_low_latency(trial)) { |
| pcm_config_low_latency.period_size = trial; |
| pcm_config_low_latency.start_threshold = trial / 4; |
| pcm_config_low_latency.avail_min = trial / 4; |
| configured_low_latency_capture_period_size = trial; |
| } |
| } |
| if (property_get("audio_hal.in_period_size", value, NULL) > 0) { |
| trial = atoi(value); |
| if (period_size_is_plausible_for_low_latency(trial)) { |
| configured_low_latency_capture_period_size = trial; |
| } |
| } |
| |
| audio_extn_utils_send_default_app_type_cfg(adev->platform, adev->mixer); |
| audio_device_ref_count++; |
| |
| if (property_get("audio_hal.period_multiplier", value, NULL) > 0) { |
| af_period_multiplier = atoi(value); |
| if (af_period_multiplier < 0) { |
| af_period_multiplier = 2; |
| } else if (af_period_multiplier > 4) { |
| af_period_multiplier = 4; |
| } |
| ALOGV("new period_multiplier = %d", af_period_multiplier); |
| } |
| |
| audio_extn_tfa_98xx_init(adev); |
| |
| pthread_mutex_unlock(&adev_init_lock); |
| |
| if (adev->adm_init) |
| adev->adm_data = adev->adm_init(); |
| |
| audio_extn_perf_lock_init(); |
| audio_extn_snd_mon_init(); |
| pthread_mutex_lock(&adev->lock); |
| audio_extn_snd_mon_register_listener(NULL, adev_snd_mon_cb); |
| adev->card_status = CARD_STATUS_ONLINE; |
| pthread_mutex_unlock(&adev->lock); |
| |
| ALOGD("%s: exit", __func__); |
| return 0; |
| } |
| |
| static struct hw_module_methods_t hal_module_methods = { |
| .open = adev_open, |
| }; |
| |
| struct audio_module HAL_MODULE_INFO_SYM = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = AUDIO_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = AUDIO_HARDWARE_MODULE_ID, |
| .name = "QCOM Audio HAL", |
| .author = "Code Aurora Forum", |
| .methods = &hal_module_methods, |
| }, |
| }; |