| /* |
| * Copyright (c) 2012, 2021, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * This file is available under and governed by the GNU General Public |
| * License version 2 only, as published by the Free Software Foundation. |
| * However, the following notice accompanied the original version of this |
| * file: |
| * |
| * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of JSR-310 nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| package java.time; |
| |
| import static java.time.LocalTime.NANOS_PER_SECOND; |
| import static java.time.LocalTime.SECONDS_PER_DAY; |
| import static java.time.LocalTime.SECONDS_PER_HOUR; |
| import static java.time.LocalTime.SECONDS_PER_MINUTE; |
| import static java.time.temporal.ChronoField.INSTANT_SECONDS; |
| import static java.time.temporal.ChronoField.MICRO_OF_SECOND; |
| import static java.time.temporal.ChronoField.MILLI_OF_SECOND; |
| import static java.time.temporal.ChronoField.NANO_OF_SECOND; |
| import static java.time.temporal.ChronoUnit.DAYS; |
| import static java.time.temporal.ChronoUnit.NANOS; |
| |
| import java.io.DataInput; |
| import java.io.DataOutput; |
| import java.io.IOException; |
| import java.io.InvalidObjectException; |
| import java.io.ObjectInputStream; |
| import java.io.Serializable; |
| import java.time.format.DateTimeFormatter; |
| import java.time.format.DateTimeParseException; |
| import java.time.temporal.ChronoField; |
| import java.time.temporal.ChronoUnit; |
| import java.time.temporal.Temporal; |
| import java.time.temporal.TemporalAccessor; |
| import java.time.temporal.TemporalAdjuster; |
| import java.time.temporal.TemporalAmount; |
| import java.time.temporal.TemporalField; |
| import java.time.temporal.TemporalQueries; |
| import java.time.temporal.TemporalQuery; |
| import java.time.temporal.TemporalUnit; |
| import java.time.temporal.UnsupportedTemporalTypeException; |
| import java.time.temporal.ValueRange; |
| import java.util.Objects; |
| |
| // Android-changed: removed ValueBased paragraph. |
| /** |
| * An instantaneous point on the time-line. |
| * <p> |
| * This class models a single instantaneous point on the time-line. |
| * This might be used to record event time-stamps in the application. |
| * <p> |
| * The range of an instant requires the storage of a number larger than a {@code long}. |
| * To achieve this, the class stores a {@code long} representing epoch-seconds and an |
| * {@code int} representing nanosecond-of-second, which will always be between 0 and 999,999,999. |
| * The epoch-seconds are measured from the standard Java epoch of {@code 1970-01-01T00:00:00Z} |
| * where instants after the epoch have positive values, and earlier instants have negative values. |
| * For both the epoch-second and nanosecond parts, a larger value is always later on the time-line |
| * than a smaller value. |
| * |
| * <h2>Time-scale</h2> |
| * <p> |
| * The length of the solar day is the standard way that humans measure time. |
| * This has traditionally been subdivided into 24 hours of 60 minutes of 60 seconds, |
| * forming a 86400 second day. |
| * <p> |
| * Modern timekeeping is based on atomic clocks which precisely define an SI second |
| * relative to the transitions of a Caesium atom. The length of an SI second was defined |
| * to be very close to the 86400th fraction of a day. |
| * <p> |
| * Unfortunately, as the Earth rotates the length of the day varies. |
| * In addition, over time the average length of the day is getting longer as the Earth slows. |
| * As a result, the length of a solar day in 2012 is slightly longer than 86400 SI seconds. |
| * The actual length of any given day and the amount by which the Earth is slowing |
| * are not predictable and can only be determined by measurement. |
| * The UT1 time-scale captures the accurate length of day, but is only available some |
| * time after the day has completed. |
| * <p> |
| * The UTC time-scale is a standard approach to bundle up all the additional fractions |
| * of a second from UT1 into whole seconds, known as <i>leap-seconds</i>. |
| * A leap-second may be added or removed depending on the Earth's rotational changes. |
| * As such, UTC permits a day to have 86399 SI seconds or 86401 SI seconds where |
| * necessary in order to keep the day aligned with the Sun. |
| * <p> |
| * The modern UTC time-scale was introduced in 1972, introducing the concept of whole leap-seconds. |
| * Between 1958 and 1972, the definition of UTC was complex, with minor sub-second leaps and |
| * alterations to the length of the notional second. As of 2012, discussions are underway |
| * to change the definition of UTC again, with the potential to remove leap seconds or |
| * introduce other changes. |
| * <p> |
| * Given the complexity of accurate timekeeping described above, this Java API defines |
| * its own time-scale, the <i>Java Time-Scale</i>. |
| * <p> |
| * The Java Time-Scale divides each calendar day into exactly 86400 |
| * subdivisions, known as seconds. These seconds may differ from the |
| * SI second. It closely matches the de facto international civil time |
| * scale, the definition of which changes from time to time. |
| * <p> |
| * The Java Time-Scale has slightly different definitions for different |
| * segments of the time-line, each based on the consensus international |
| * time scale that is used as the basis for civil time. Whenever the |
| * internationally-agreed time scale is modified or replaced, a new |
| * segment of the Java Time-Scale must be defined for it. Each segment |
| * must meet these requirements: |
| * <ul> |
| * <li>the Java Time-Scale shall closely match the underlying international |
| * civil time scale;</li> |
| * <li>the Java Time-Scale shall exactly match the international civil |
| * time scale at noon each day;</li> |
| * <li>the Java Time-Scale shall have a precisely-defined relationship to |
| * the international civil time scale.</li> |
| * </ul> |
| * There are currently, as of 2013, two segments in the Java time-scale. |
| * <p> |
| * For the segment from 1972-11-03 (exact boundary discussed below) until |
| * further notice, the consensus international time scale is UTC (with |
| * leap seconds). In this segment, the Java Time-Scale is identical to |
| * <a href="http://www.cl.cam.ac.uk/~mgk25/time/utc-sls/">UTC-SLS</a>. |
| * This is identical to UTC on days that do not have a leap second. |
| * On days that do have a leap second, the leap second is spread equally |
| * over the last 1000 seconds of the day, maintaining the appearance of |
| * exactly 86400 seconds per day. |
| * <p> |
| * For the segment prior to 1972-11-03, extending back arbitrarily far, |
| * the consensus international time scale is defined to be UT1, applied |
| * proleptically, which is equivalent to the (mean) solar time on the |
| * prime meridian (Greenwich). In this segment, the Java Time-Scale is |
| * identical to the consensus international time scale. The exact |
| * boundary between the two segments is the instant where UT1 = UTC |
| * between 1972-11-03T00:00 and 1972-11-04T12:00. |
| * <p> |
| * Implementations of the Java time-scale using the JSR-310 API are not |
| * required to provide any clock that is sub-second accurate, or that |
| * progresses monotonically or smoothly. Implementations are therefore |
| * not required to actually perform the UTC-SLS slew or to otherwise be |
| * aware of leap seconds. JSR-310 does, however, require that |
| * implementations must document the approach they use when defining a |
| * clock representing the current instant. |
| * See {@link Clock} for details on the available clocks. |
| * <p> |
| * The Java time-scale is used for all date-time classes. |
| * This includes {@code Instant}, {@code LocalDate}, {@code LocalTime}, {@code OffsetDateTime}, |
| * {@code ZonedDateTime} and {@code Duration}. |
| * |
| * @implSpec |
| * This class is immutable and thread-safe. |
| * |
| * @since 1.8 |
| */ |
| public final class Instant |
| implements Temporal, TemporalAdjuster, Comparable<Instant>, Serializable { |
| |
| /** |
| * Constant for the 1970-01-01T00:00:00Z epoch instant. |
| */ |
| public static final Instant EPOCH = new Instant(0, 0); |
| /** |
| * The minimum supported epoch second. |
| */ |
| private static final long MIN_SECOND = -31557014167219200L; |
| /** |
| * The maximum supported epoch second. |
| */ |
| private static final long MAX_SECOND = 31556889864403199L; |
| /** |
| * The minimum supported {@code Instant}, '-1000000000-01-01T00:00Z'. |
| * This could be used by an application as a "far past" instant. |
| * <p> |
| * This is one year earlier than the minimum {@code LocalDateTime}. |
| * This provides sufficient values to handle the range of {@code ZoneOffset} |
| * which affect the instant in addition to the local date-time. |
| * The value is also chosen such that the value of the year fits in |
| * an {@code int}. |
| */ |
| public static final Instant MIN = Instant.ofEpochSecond(MIN_SECOND, 0); |
| /** |
| * The maximum supported {@code Instant}, '1000000000-12-31T23:59:59.999999999Z'. |
| * This could be used by an application as a "far future" instant. |
| * <p> |
| * This is one year later than the maximum {@code LocalDateTime}. |
| * This provides sufficient values to handle the range of {@code ZoneOffset} |
| * which affect the instant in addition to the local date-time. |
| * The value is also chosen such that the value of the year fits in |
| * an {@code int}. |
| */ |
| public static final Instant MAX = Instant.ofEpochSecond(MAX_SECOND, 999_999_999); |
| |
| /** |
| * Serialization version. |
| */ |
| @java.io.Serial |
| private static final long serialVersionUID = -665713676816604388L; |
| |
| /** |
| * The number of seconds from the epoch of 1970-01-01T00:00:00Z. |
| */ |
| private final long seconds; |
| /** |
| * The number of nanoseconds, later along the time-line, from the seconds field. |
| * This is always positive, and never exceeds 999,999,999. |
| */ |
| private final int nanos; |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Obtains the current instant from the system clock. |
| * <p> |
| * This will query the {@link Clock#systemUTC() system UTC clock} to |
| * obtain the current instant. |
| * <p> |
| * Using this method will prevent the ability to use an alternate time-source for |
| * testing because the clock is effectively hard-coded. |
| * |
| * @return the current instant using the system clock, not null |
| */ |
| public static Instant now() { |
| return Clock.currentInstant(); |
| } |
| |
| /** |
| * Obtains the current instant from the specified clock. |
| * <p> |
| * This will query the specified clock to obtain the current time. |
| * <p> |
| * Using this method allows the use of an alternate clock for testing. |
| * The alternate clock may be introduced using {@link Clock dependency injection}. |
| * |
| * @param clock the clock to use, not null |
| * @return the current instant, not null |
| */ |
| public static Instant now(Clock clock) { |
| Objects.requireNonNull(clock, "clock"); |
| return clock.instant(); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Obtains an instance of {@code Instant} using seconds from the |
| * epoch of 1970-01-01T00:00:00Z. |
| * <p> |
| * The nanosecond field is set to zero. |
| * |
| * @param epochSecond the number of seconds from 1970-01-01T00:00:00Z |
| * @return an instant, not null |
| * @throws DateTimeException if the instant exceeds the maximum or minimum instant |
| */ |
| public static Instant ofEpochSecond(long epochSecond) { |
| return create(epochSecond, 0); |
| } |
| |
| /** |
| * Obtains an instance of {@code Instant} using seconds from the |
| * epoch of 1970-01-01T00:00:00Z and nanosecond fraction of second. |
| * <p> |
| * This method allows an arbitrary number of nanoseconds to be passed in. |
| * The factory will alter the values of the second and nanosecond in order |
| * to ensure that the stored nanosecond is in the range 0 to 999,999,999. |
| * For example, the following will result in exactly the same instant: |
| * <pre> |
| * Instant.ofEpochSecond(3, 1); |
| * Instant.ofEpochSecond(4, -999_999_999); |
| * Instant.ofEpochSecond(2, 1000_000_001); |
| * </pre> |
| * |
| * @param epochSecond the number of seconds from 1970-01-01T00:00:00Z |
| * @param nanoAdjustment the nanosecond adjustment to the number of seconds, positive or negative |
| * @return an instant, not null |
| * @throws DateTimeException if the instant exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public static Instant ofEpochSecond(long epochSecond, long nanoAdjustment) { |
| long secs = Math.addExact(epochSecond, Math.floorDiv(nanoAdjustment, NANOS_PER_SECOND)); |
| int nos = (int)Math.floorMod(nanoAdjustment, NANOS_PER_SECOND); |
| return create(secs, nos); |
| } |
| |
| /** |
| * Obtains an instance of {@code Instant} using milliseconds from the |
| * epoch of 1970-01-01T00:00:00Z. |
| * <p> |
| * The seconds and nanoseconds are extracted from the specified milliseconds. |
| * |
| * @param epochMilli the number of milliseconds from 1970-01-01T00:00:00Z |
| * @return an instant, not null |
| * @throws DateTimeException if the instant exceeds the maximum or minimum instant |
| */ |
| public static Instant ofEpochMilli(long epochMilli) { |
| long secs = Math.floorDiv(epochMilli, 1000); |
| int mos = Math.floorMod(epochMilli, 1000); |
| return create(secs, mos * 1000_000); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Obtains an instance of {@code Instant} from a temporal object. |
| * <p> |
| * This obtains an instant based on the specified temporal. |
| * A {@code TemporalAccessor} represents an arbitrary set of date and time information, |
| * which this factory converts to an instance of {@code Instant}. |
| * <p> |
| * The conversion extracts the {@link ChronoField#INSTANT_SECONDS INSTANT_SECONDS} |
| * and {@link ChronoField#NANO_OF_SECOND NANO_OF_SECOND} fields. |
| * <p> |
| * This method matches the signature of the functional interface {@link TemporalQuery} |
| * allowing it to be used as a query via method reference, {@code Instant::from}. |
| * |
| * @param temporal the temporal object to convert, not null |
| * @return the instant, not null |
| * @throws DateTimeException if unable to convert to an {@code Instant} |
| */ |
| public static Instant from(TemporalAccessor temporal) { |
| if (temporal instanceof Instant) { |
| return (Instant) temporal; |
| } |
| Objects.requireNonNull(temporal, "temporal"); |
| try { |
| long instantSecs = temporal.getLong(INSTANT_SECONDS); |
| int nanoOfSecond = temporal.get(NANO_OF_SECOND); |
| return Instant.ofEpochSecond(instantSecs, nanoOfSecond); |
| } catch (DateTimeException ex) { |
| throw new DateTimeException("Unable to obtain Instant from TemporalAccessor: " + |
| temporal + " of type " + temporal.getClass().getName(), ex); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Obtains an instance of {@code Instant} from a text string such as |
| * {@code 2007-12-03T10:15:30.00Z}. |
| * <p> |
| * The string must represent a valid instant in UTC and is parsed using |
| * {@link DateTimeFormatter#ISO_INSTANT}. |
| * |
| * @param text the text to parse, not null |
| * @return the parsed instant, not null |
| * @throws DateTimeParseException if the text cannot be parsed |
| */ |
| public static Instant parse(final CharSequence text) { |
| return DateTimeFormatter.ISO_INSTANT.parse(text, Instant::from); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Obtains an instance of {@code Instant} using seconds and nanoseconds. |
| * |
| * @param seconds the length of the duration in seconds |
| * @param nanoOfSecond the nano-of-second, from 0 to 999,999,999 |
| * @throws DateTimeException if the instant exceeds the maximum or minimum instant |
| */ |
| private static Instant create(long seconds, int nanoOfSecond) { |
| if ((seconds | nanoOfSecond) == 0) { |
| return EPOCH; |
| } |
| if (seconds < MIN_SECOND || seconds > MAX_SECOND) { |
| throw new DateTimeException("Instant exceeds minimum or maximum instant"); |
| } |
| return new Instant(seconds, nanoOfSecond); |
| } |
| |
| /** |
| * Constructs an instance of {@code Instant} using seconds from the epoch of |
| * 1970-01-01T00:00:00Z and nanosecond fraction of second. |
| * |
| * @param epochSecond the number of seconds from 1970-01-01T00:00:00Z |
| * @param nanos the nanoseconds within the second, must be positive |
| */ |
| private Instant(long epochSecond, int nanos) { |
| super(); |
| this.seconds = epochSecond; |
| this.nanos = nanos; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks if the specified field is supported. |
| * <p> |
| * This checks if this instant can be queried for the specified field. |
| * If false, then calling the {@link #range(TemporalField) range}, |
| * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)} |
| * methods will throw an exception. |
| * <p> |
| * If the field is a {@link ChronoField} then the query is implemented here. |
| * The supported fields are: |
| * <ul> |
| * <li>{@code NANO_OF_SECOND} |
| * <li>{@code MICRO_OF_SECOND} |
| * <li>{@code MILLI_OF_SECOND} |
| * <li>{@code INSTANT_SECONDS} |
| * </ul> |
| * All other {@code ChronoField} instances will return false. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)} |
| * passing {@code this} as the argument. |
| * Whether the field is supported is determined by the field. |
| * |
| * @param field the field to check, null returns false |
| * @return true if the field is supported on this instant, false if not |
| */ |
| @Override |
| public boolean isSupported(TemporalField field) { |
| if (field instanceof ChronoField) { |
| return field == INSTANT_SECONDS || field == NANO_OF_SECOND || field == MICRO_OF_SECOND || field == MILLI_OF_SECOND; |
| } |
| return field != null && field.isSupportedBy(this); |
| } |
| |
| /** |
| * Checks if the specified unit is supported. |
| * <p> |
| * This checks if the specified unit can be added to, or subtracted from, this date-time. |
| * If false, then calling the {@link #plus(long, TemporalUnit)} and |
| * {@link #minus(long, TemporalUnit) minus} methods will throw an exception. |
| * <p> |
| * If the unit is a {@link ChronoUnit} then the query is implemented here. |
| * The supported units are: |
| * <ul> |
| * <li>{@code NANOS} |
| * <li>{@code MICROS} |
| * <li>{@code MILLIS} |
| * <li>{@code SECONDS} |
| * <li>{@code MINUTES} |
| * <li>{@code HOURS} |
| * <li>{@code HALF_DAYS} |
| * <li>{@code DAYS} |
| * </ul> |
| * All other {@code ChronoUnit} instances will return false. |
| * <p> |
| * If the unit is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)} |
| * passing {@code this} as the argument. |
| * Whether the unit is supported is determined by the unit. |
| * |
| * @param unit the unit to check, null returns false |
| * @return true if the unit can be added/subtracted, false if not |
| */ |
| @Override |
| public boolean isSupported(TemporalUnit unit) { |
| if (unit instanceof ChronoUnit) { |
| return unit.isTimeBased() || unit == DAYS; |
| } |
| return unit != null && unit.isSupportedBy(this); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Gets the range of valid values for the specified field. |
| * <p> |
| * The range object expresses the minimum and maximum valid values for a field. |
| * This instant is used to enhance the accuracy of the returned range. |
| * If it is not possible to return the range, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link ChronoField} then the query is implemented here. |
| * The {@link #isSupported(TemporalField) supported fields} will return |
| * appropriate range instances. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)} |
| * passing {@code this} as the argument. |
| * Whether the range can be obtained is determined by the field. |
| * |
| * @param field the field to query the range for, not null |
| * @return the range of valid values for the field, not null |
| * @throws DateTimeException if the range for the field cannot be obtained |
| * @throws UnsupportedTemporalTypeException if the field is not supported |
| */ |
| @Override // override for Javadoc |
| public ValueRange range(TemporalField field) { |
| return Temporal.super.range(field); |
| } |
| |
| /** |
| * Gets the value of the specified field from this instant as an {@code int}. |
| * <p> |
| * This queries this instant for the value of the specified field. |
| * The returned value will always be within the valid range of values for the field. |
| * If it is not possible to return the value, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link ChronoField} then the query is implemented here. |
| * The {@link #isSupported(TemporalField) supported fields} will return valid |
| * values based on this date-time, except {@code INSTANT_SECONDS} which is too |
| * large to fit in an {@code int} and throws a {@code DateTimeException}. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} |
| * passing {@code this} as the argument. Whether the value can be obtained, |
| * and what the value represents, is determined by the field. |
| * |
| * @param field the field to get, not null |
| * @return the value for the field |
| * @throws DateTimeException if a value for the field cannot be obtained or |
| * the value is outside the range of valid values for the field |
| * @throws UnsupportedTemporalTypeException if the field is not supported or |
| * the range of values exceeds an {@code int} |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override // override for Javadoc and performance |
| public int get(TemporalField field) { |
| if (field instanceof ChronoField) { |
| switch ((ChronoField) field) { |
| case NANO_OF_SECOND: return nanos; |
| case MICRO_OF_SECOND: return nanos / 1000; |
| case MILLI_OF_SECOND: return nanos / 1000_000; |
| } |
| throw new UnsupportedTemporalTypeException("Unsupported field: " + field); |
| } |
| return range(field).checkValidIntValue(field.getFrom(this), field); |
| } |
| |
| /** |
| * Gets the value of the specified field from this instant as a {@code long}. |
| * <p> |
| * This queries this instant for the value of the specified field. |
| * If it is not possible to return the value, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link ChronoField} then the query is implemented here. |
| * The {@link #isSupported(TemporalField) supported fields} will return valid |
| * values based on this date-time. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} |
| * passing {@code this} as the argument. Whether the value can be obtained, |
| * and what the value represents, is determined by the field. |
| * |
| * @param field the field to get, not null |
| * @return the value for the field |
| * @throws DateTimeException if a value for the field cannot be obtained |
| * @throws UnsupportedTemporalTypeException if the field is not supported |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public long getLong(TemporalField field) { |
| if (field instanceof ChronoField) { |
| switch ((ChronoField) field) { |
| case NANO_OF_SECOND: return nanos; |
| case MICRO_OF_SECOND: return nanos / 1000; |
| case MILLI_OF_SECOND: return nanos / 1000_000; |
| case INSTANT_SECONDS: return seconds; |
| } |
| throw new UnsupportedTemporalTypeException("Unsupported field: " + field); |
| } |
| return field.getFrom(this); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Gets the number of seconds from the Java epoch of 1970-01-01T00:00:00Z. |
| * <p> |
| * The epoch second count is a simple incrementing count of seconds where |
| * second 0 is 1970-01-01T00:00:00Z. |
| * The nanosecond part is returned by {@link #getNano}. |
| * |
| * @return the seconds from the epoch of 1970-01-01T00:00:00Z |
| */ |
| public long getEpochSecond() { |
| return seconds; |
| } |
| |
| /** |
| * Gets the number of nanoseconds, later along the time-line, from the start |
| * of the second. |
| * <p> |
| * The nanosecond-of-second value measures the total number of nanoseconds from |
| * the second returned by {@link #getEpochSecond}. |
| * |
| * @return the nanoseconds within the second, always positive, never exceeds 999,999,999 |
| */ |
| public int getNano() { |
| return nanos; |
| } |
| |
| //------------------------------------------------------------------------- |
| /** |
| * Returns an adjusted copy of this instant. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the instant adjusted. |
| * The adjustment takes place using the specified adjuster strategy object. |
| * Read the documentation of the adjuster to understand what adjustment will be made. |
| * <p> |
| * The result of this method is obtained by invoking the |
| * {@link TemporalAdjuster#adjustInto(Temporal)} method on the |
| * specified adjuster passing {@code this} as the argument. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param adjuster the adjuster to use, not null |
| * @return an {@code Instant} based on {@code this} with the adjustment made, not null |
| * @throws DateTimeException if the adjustment cannot be made |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant with(TemporalAdjuster adjuster) { |
| return (Instant) adjuster.adjustInto(this); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified field set to a new value. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the value |
| * for the specified field changed. |
| * If it is not possible to set the value, because the field is not supported or for |
| * some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link ChronoField} then the adjustment is implemented here. |
| * The supported fields behave as follows: |
| * <ul> |
| * <li>{@code NANO_OF_SECOND} - |
| * Returns an {@code Instant} with the specified nano-of-second. |
| * The epoch-second will be unchanged. |
| * <li>{@code MICRO_OF_SECOND} - |
| * Returns an {@code Instant} with the nano-of-second replaced by the specified |
| * micro-of-second multiplied by 1,000. The epoch-second will be unchanged. |
| * <li>{@code MILLI_OF_SECOND} - |
| * Returns an {@code Instant} with the nano-of-second replaced by the specified |
| * milli-of-second multiplied by 1,000,000. The epoch-second will be unchanged. |
| * <li>{@code INSTANT_SECONDS} - |
| * Returns an {@code Instant} with the specified epoch-second. |
| * The nano-of-second will be unchanged. |
| * </ul> |
| * <p> |
| * In all cases, if the new value is outside the valid range of values for the field |
| * then a {@code DateTimeException} will be thrown. |
| * <p> |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)} |
| * passing {@code this} as the argument. In this case, the field determines |
| * whether and how to adjust the instant. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param field the field to set in the result, not null |
| * @param newValue the new value of the field in the result |
| * @return an {@code Instant} based on {@code this} with the specified field set, not null |
| * @throws DateTimeException if the field cannot be set |
| * @throws UnsupportedTemporalTypeException if the field is not supported |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant with(TemporalField field, long newValue) { |
| if (field instanceof ChronoField chronoField) { |
| chronoField.checkValidValue(newValue); |
| switch (chronoField) { |
| case MILLI_OF_SECOND: { |
| int nval = (int) newValue * 1000_000; |
| return (nval != nanos ? create(seconds, nval) : this); |
| } |
| case MICRO_OF_SECOND: { |
| int nval = (int) newValue * 1000; |
| return (nval != nanos ? create(seconds, nval) : this); |
| } |
| case NANO_OF_SECOND: return (newValue != nanos ? create(seconds, (int) newValue) : this); |
| case INSTANT_SECONDS: return (newValue != seconds ? create(newValue, nanos) : this); |
| } |
| throw new UnsupportedTemporalTypeException("Unsupported field: " + field); |
| } |
| return field.adjustInto(this, newValue); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Returns a copy of this {@code Instant} truncated to the specified unit. |
| * <p> |
| * Truncating the instant returns a copy of the original with fields |
| * smaller than the specified unit set to zero. |
| * The fields are calculated on the basis of using a UTC offset as seen |
| * in {@code toString}. |
| * For example, truncating with the {@link ChronoUnit#MINUTES MINUTES} unit will |
| * round down to the nearest minute, setting the seconds and nanoseconds to zero. |
| * <p> |
| * The unit must have a {@linkplain TemporalUnit#getDuration() duration} |
| * that divides into the length of a standard day without remainder. |
| * This includes all supplied time units on {@link ChronoUnit} and |
| * {@link ChronoUnit#DAYS DAYS}. Other units throw an exception. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param unit the unit to truncate to, not null |
| * @return an {@code Instant} based on this instant with the time truncated, not null |
| * @throws DateTimeException if the unit is invalid for truncation |
| * @throws UnsupportedTemporalTypeException if the unit is not supported |
| */ |
| public Instant truncatedTo(TemporalUnit unit) { |
| if (unit == ChronoUnit.NANOS) { |
| return this; |
| } |
| Duration unitDur = unit.getDuration(); |
| if (unitDur.getSeconds() > LocalTime.SECONDS_PER_DAY) { |
| throw new UnsupportedTemporalTypeException("Unit is too large to be used for truncation"); |
| } |
| long dur = unitDur.toNanos(); |
| if ((LocalTime.NANOS_PER_DAY % dur) != 0) { |
| throw new UnsupportedTemporalTypeException("Unit must divide into a standard day without remainder"); |
| } |
| long nod = (seconds % LocalTime.SECONDS_PER_DAY) * LocalTime.NANOS_PER_SECOND + nanos; |
| long result = Math.floorDiv(nod, dur) * dur; |
| return plusNanos(result - nod); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Returns a copy of this instant with the specified amount added. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the specified amount added. |
| * The amount is typically {@link Duration} but may be any other type implementing |
| * the {@link TemporalAmount} interface. |
| * <p> |
| * The calculation is delegated to the amount object by calling |
| * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free |
| * to implement the addition in any way it wishes, however it typically |
| * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation |
| * of the amount implementation to determine if it can be successfully added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToAdd the amount to add, not null |
| * @return an {@code Instant} based on this instant with the addition made, not null |
| * @throws DateTimeException if the addition cannot be made |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant plus(TemporalAmount amountToAdd) { |
| return (Instant) amountToAdd.addTo(this); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified amount added. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the amount |
| * in terms of the unit added. If it is not possible to add the amount, because the |
| * unit is not supported or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link ChronoUnit} then the addition is implemented here. |
| * The supported fields behave as follows: |
| * <ul> |
| * <li>{@code NANOS} - |
| * Returns an {@code Instant} with the specified number of nanoseconds added. |
| * This is equivalent to {@link #plusNanos(long)}. |
| * <li>{@code MICROS} - |
| * Returns an {@code Instant} with the specified number of microseconds added. |
| * This is equivalent to {@link #plusNanos(long)} with the amount |
| * multiplied by 1,000. |
| * <li>{@code MILLIS} - |
| * Returns an {@code Instant} with the specified number of milliseconds added. |
| * This is equivalent to {@link #plusNanos(long)} with the amount |
| * multiplied by 1,000,000. |
| * <li>{@code SECONDS} - |
| * Returns an {@code Instant} with the specified number of seconds added. |
| * This is equivalent to {@link #plusSeconds(long)}. |
| * <li>{@code MINUTES} - |
| * Returns an {@code Instant} with the specified number of minutes added. |
| * This is equivalent to {@link #plusSeconds(long)} with the amount |
| * multiplied by 60. |
| * <li>{@code HOURS} - |
| * Returns an {@code Instant} with the specified number of hours added. |
| * This is equivalent to {@link #plusSeconds(long)} with the amount |
| * multiplied by 3,600. |
| * <li>{@code HALF_DAYS} - |
| * Returns an {@code Instant} with the specified number of half-days added. |
| * This is equivalent to {@link #plusSeconds(long)} with the amount |
| * multiplied by 43,200 (12 hours). |
| * <li>{@code DAYS} - |
| * Returns an {@code Instant} with the specified number of days added. |
| * This is equivalent to {@link #plusSeconds(long)} with the amount |
| * multiplied by 86,400 (24 hours). |
| * </ul> |
| * <p> |
| * All other {@code ChronoUnit} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)} |
| * passing {@code this} as the argument. In this case, the unit determines |
| * whether and how to perform the addition. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToAdd the amount of the unit to add to the result, may be negative |
| * @param unit the unit of the amount to add, not null |
| * @return an {@code Instant} based on this instant with the specified amount added, not null |
| * @throws DateTimeException if the addition cannot be made |
| * @throws UnsupportedTemporalTypeException if the unit is not supported |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant plus(long amountToAdd, TemporalUnit unit) { |
| if (unit instanceof ChronoUnit) { |
| switch ((ChronoUnit) unit) { |
| case NANOS: return plusNanos(amountToAdd); |
| case MICROS: return plus(amountToAdd / 1000_000, (amountToAdd % 1000_000) * 1000); |
| case MILLIS: return plusMillis(amountToAdd); |
| case SECONDS: return plusSeconds(amountToAdd); |
| case MINUTES: return plusSeconds(Math.multiplyExact(amountToAdd, SECONDS_PER_MINUTE)); |
| case HOURS: return plusSeconds(Math.multiplyExact(amountToAdd, SECONDS_PER_HOUR)); |
| case HALF_DAYS: return plusSeconds(Math.multiplyExact(amountToAdd, SECONDS_PER_DAY / 2)); |
| case DAYS: return plusSeconds(Math.multiplyExact(amountToAdd, SECONDS_PER_DAY)); |
| } |
| throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); |
| } |
| return unit.addTo(this, amountToAdd); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Returns a copy of this instant with the specified duration in seconds added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param secondsToAdd the seconds to add, positive or negative |
| * @return an {@code Instant} based on this instant with the specified seconds added, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant plusSeconds(long secondsToAdd) { |
| return plus(secondsToAdd, 0); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified duration in milliseconds added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param millisToAdd the milliseconds to add, positive or negative |
| * @return an {@code Instant} based on this instant with the specified milliseconds added, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant plusMillis(long millisToAdd) { |
| return plus(millisToAdd / 1000, (millisToAdd % 1000) * 1000_000); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified duration in nanoseconds added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param nanosToAdd the nanoseconds to add, positive or negative |
| * @return an {@code Instant} based on this instant with the specified nanoseconds added, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant plusNanos(long nanosToAdd) { |
| return plus(0, nanosToAdd); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified duration added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param secondsToAdd the seconds to add, positive or negative |
| * @param nanosToAdd the nanos to add, positive or negative |
| * @return an {@code Instant} based on this instant with the specified seconds added, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| private Instant plus(long secondsToAdd, long nanosToAdd) { |
| if ((secondsToAdd | nanosToAdd) == 0) { |
| return this; |
| } |
| long epochSec = Math.addExact(seconds, secondsToAdd); |
| epochSec = Math.addExact(epochSec, nanosToAdd / NANOS_PER_SECOND); |
| nanosToAdd = nanosToAdd % NANOS_PER_SECOND; |
| long nanoAdjustment = nanos + nanosToAdd; // safe int+NANOS_PER_SECOND |
| return ofEpochSecond(epochSec, nanoAdjustment); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Returns a copy of this instant with the specified amount subtracted. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the specified amount subtracted. |
| * The amount is typically {@link Duration} but may be any other type implementing |
| * the {@link TemporalAmount} interface. |
| * <p> |
| * The calculation is delegated to the amount object by calling |
| * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free |
| * to implement the subtraction in any way it wishes, however it typically |
| * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation |
| * of the amount implementation to determine if it can be successfully subtracted. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToSubtract the amount to subtract, not null |
| * @return an {@code Instant} based on this instant with the subtraction made, not null |
| * @throws DateTimeException if the subtraction cannot be made |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant minus(TemporalAmount amountToSubtract) { |
| return (Instant) amountToSubtract.subtractFrom(this); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified amount subtracted. |
| * <p> |
| * This returns an {@code Instant}, based on this one, with the amount |
| * in terms of the unit subtracted. If it is not possible to subtract the amount, |
| * because the unit is not supported or for some other reason, an exception is thrown. |
| * <p> |
| * This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated. |
| * See that method for a full description of how addition, and thus subtraction, works. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToSubtract the amount of the unit to subtract from the result, may be negative |
| * @param unit the unit of the amount to subtract, not null |
| * @return an {@code Instant} based on this instant with the specified amount subtracted, not null |
| * @throws DateTimeException if the subtraction cannot be made |
| * @throws UnsupportedTemporalTypeException if the unit is not supported |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Instant minus(long amountToSubtract, TemporalUnit unit) { |
| return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit)); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Returns a copy of this instant with the specified duration in seconds subtracted. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param secondsToSubtract the seconds to subtract, positive or negative |
| * @return an {@code Instant} based on this instant with the specified seconds subtracted, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant minusSeconds(long secondsToSubtract) { |
| if (secondsToSubtract == Long.MIN_VALUE) { |
| return plusSeconds(Long.MAX_VALUE).plusSeconds(1); |
| } |
| return plusSeconds(-secondsToSubtract); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified duration in milliseconds subtracted. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param millisToSubtract the milliseconds to subtract, positive or negative |
| * @return an {@code Instant} based on this instant with the specified milliseconds subtracted, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant minusMillis(long millisToSubtract) { |
| if (millisToSubtract == Long.MIN_VALUE) { |
| return plusMillis(Long.MAX_VALUE).plusMillis(1); |
| } |
| return plusMillis(-millisToSubtract); |
| } |
| |
| /** |
| * Returns a copy of this instant with the specified duration in nanoseconds subtracted. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param nanosToSubtract the nanoseconds to subtract, positive or negative |
| * @return an {@code Instant} based on this instant with the specified nanoseconds subtracted, not null |
| * @throws DateTimeException if the result exceeds the maximum or minimum instant |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public Instant minusNanos(long nanosToSubtract) { |
| if (nanosToSubtract == Long.MIN_VALUE) { |
| return plusNanos(Long.MAX_VALUE).plusNanos(1); |
| } |
| return plusNanos(-nanosToSubtract); |
| } |
| |
| //------------------------------------------------------------------------- |
| /** |
| * Queries this instant using the specified query. |
| * <p> |
| * This queries this instant using the specified query strategy object. |
| * The {@code TemporalQuery} object defines the logic to be used to |
| * obtain the result. Read the documentation of the query to understand |
| * what the result of this method will be. |
| * <p> |
| * The result of this method is obtained by invoking the |
| * {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the |
| * specified query passing {@code this} as the argument. |
| * |
| * @param <R> the type of the result |
| * @param query the query to invoke, not null |
| * @return the query result, null may be returned (defined by the query) |
| * @throws DateTimeException if unable to query (defined by the query) |
| * @throws ArithmeticException if numeric overflow occurs (defined by the query) |
| */ |
| @SuppressWarnings("unchecked") |
| @Override |
| public <R> R query(TemporalQuery<R> query) { |
| if (query == TemporalQueries.precision()) { |
| return (R) NANOS; |
| } |
| // inline TemporalAccessor.super.query(query) as an optimization |
| if (query == TemporalQueries.chronology() || query == TemporalQueries.zoneId() || |
| query == TemporalQueries.zone() || query == TemporalQueries.offset() || |
| query == TemporalQueries.localDate() || query == TemporalQueries.localTime()) { |
| return null; |
| } |
| return query.queryFrom(this); |
| } |
| |
| /** |
| * Adjusts the specified temporal object to have this instant. |
| * <p> |
| * This returns a temporal object of the same observable type as the input |
| * with the instant changed to be the same as this. |
| * <p> |
| * The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)} |
| * twice, passing {@link ChronoField#INSTANT_SECONDS} and |
| * {@link ChronoField#NANO_OF_SECOND} as the fields. |
| * <p> |
| * In most cases, it is clearer to reverse the calling pattern by using |
| * {@link Temporal#with(TemporalAdjuster)}: |
| * <pre> |
| * // these two lines are equivalent, but the second approach is recommended |
| * temporal = thisInstant.adjustInto(temporal); |
| * temporal = temporal.with(thisInstant); |
| * </pre> |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param temporal the target object to be adjusted, not null |
| * @return the adjusted object, not null |
| * @throws DateTimeException if unable to make the adjustment |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public Temporal adjustInto(Temporal temporal) { |
| return temporal.with(INSTANT_SECONDS, seconds).with(NANO_OF_SECOND, nanos); |
| } |
| |
| /** |
| * Calculates the amount of time until another instant in terms of the specified unit. |
| * <p> |
| * This calculates the amount of time between two {@code Instant} |
| * objects in terms of a single {@code TemporalUnit}. |
| * The start and end points are {@code this} and the specified instant. |
| * The result will be negative if the end is before the start. |
| * The calculation returns a whole number, representing the number of |
| * complete units between the two instants. |
| * The {@code Temporal} passed to this method is converted to a |
| * {@code Instant} using {@link #from(TemporalAccessor)}. |
| * For example, the amount in seconds between two dates can be calculated |
| * using {@code startInstant.until(endInstant, SECONDS)}. |
| * <p> |
| * There are two equivalent ways of using this method. |
| * The first is to invoke this method. |
| * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}: |
| * <pre> |
| * // these two lines are equivalent |
| * amount = start.until(end, SECONDS); |
| * amount = SECONDS.between(start, end); |
| * </pre> |
| * The choice should be made based on which makes the code more readable. |
| * <p> |
| * The calculation is implemented in this method for {@link ChronoUnit}. |
| * The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS}, |
| * {@code MINUTES}, {@code HOURS}, {@code HALF_DAYS} and {@code DAYS} |
| * are supported. Other {@code ChronoUnit} values will throw an exception. |
| * <p> |
| * If the unit is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)} |
| * passing {@code this} as the first argument and the converted input temporal |
| * as the second argument. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param endExclusive the end date, exclusive, which is converted to an {@code Instant}, not null |
| * @param unit the unit to measure the amount in, not null |
| * @return the amount of time between this instant and the end instant |
| * @throws DateTimeException if the amount cannot be calculated, or the end |
| * temporal cannot be converted to an {@code Instant} |
| * @throws UnsupportedTemporalTypeException if the unit is not supported |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| @Override |
| public long until(Temporal endExclusive, TemporalUnit unit) { |
| Instant end = Instant.from(endExclusive); |
| if (unit instanceof ChronoUnit chronoUnit) { |
| switch (chronoUnit) { |
| case NANOS: return nanosUntil(end); |
| case MICROS: return nanosUntil(end) / 1000; |
| case MILLIS: return Math.subtractExact(end.toEpochMilli(), toEpochMilli()); |
| case SECONDS: return secondsUntil(end); |
| case MINUTES: return secondsUntil(end) / SECONDS_PER_MINUTE; |
| case HOURS: return secondsUntil(end) / SECONDS_PER_HOUR; |
| case HALF_DAYS: return secondsUntil(end) / (12 * SECONDS_PER_HOUR); |
| case DAYS: return secondsUntil(end) / (SECONDS_PER_DAY); |
| } |
| throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); |
| } |
| return unit.between(this, end); |
| } |
| |
| private long nanosUntil(Instant end) { |
| long secsDiff = Math.subtractExact(end.seconds, seconds); |
| long totalNanos = Math.multiplyExact(secsDiff, NANOS_PER_SECOND); |
| return Math.addExact(totalNanos, end.nanos - nanos); |
| } |
| |
| private long secondsUntil(Instant end) { |
| long secsDiff = Math.subtractExact(end.seconds, seconds); |
| long nanosDiff = end.nanos - nanos; |
| if (secsDiff > 0 && nanosDiff < 0) { |
| secsDiff--; |
| } else if (secsDiff < 0 && nanosDiff > 0) { |
| secsDiff++; |
| } |
| return secsDiff; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Combines this instant with an offset to create an {@code OffsetDateTime}. |
| * <p> |
| * This returns an {@code OffsetDateTime} formed from this instant at the |
| * specified offset from UTC/Greenwich. An exception will be thrown if the |
| * instant is too large to fit into an offset date-time. |
| * <p> |
| * This method is equivalent to |
| * {@link OffsetDateTime#ofInstant(Instant, ZoneId) OffsetDateTime.ofInstant(this, offset)}. |
| * |
| * @param offset the offset to combine with, not null |
| * @return the offset date-time formed from this instant and the specified offset, not null |
| * @throws DateTimeException if the result exceeds the supported range |
| */ |
| public OffsetDateTime atOffset(ZoneOffset offset) { |
| return OffsetDateTime.ofInstant(this, offset); |
| } |
| |
| /** |
| * Combines this instant with a time-zone to create a {@code ZonedDateTime}. |
| * <p> |
| * This returns an {@code ZonedDateTime} formed from this instant at the |
| * specified time-zone. An exception will be thrown if the instant is too |
| * large to fit into a zoned date-time. |
| * <p> |
| * This method is equivalent to |
| * {@link ZonedDateTime#ofInstant(Instant, ZoneId) ZonedDateTime.ofInstant(this, zone)}. |
| * |
| * @param zone the zone to combine with, not null |
| * @return the zoned date-time formed from this instant and the specified zone, not null |
| * @throws DateTimeException if the result exceeds the supported range |
| */ |
| public ZonedDateTime atZone(ZoneId zone) { |
| return ZonedDateTime.ofInstant(this, zone); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Converts this instant to the number of milliseconds from the epoch |
| * of 1970-01-01T00:00:00Z. |
| * <p> |
| * If this instant represents a point on the time-line too far in the future |
| * or past to fit in a {@code long} milliseconds, then an exception is thrown. |
| * <p> |
| * If this instant has greater than millisecond precision, then the conversion |
| * will drop any excess precision information as though the amount in nanoseconds |
| * was subject to integer division by one million. |
| * |
| * @return the number of milliseconds since the epoch of 1970-01-01T00:00:00Z |
| * @throws ArithmeticException if numeric overflow occurs |
| */ |
| public long toEpochMilli() { |
| if (seconds < 0 && nanos > 0) { |
| long millis = Math.multiplyExact(seconds+1, 1000); |
| long adjustment = nanos / 1000_000 - 1000; |
| return Math.addExact(millis, adjustment); |
| } else { |
| long millis = Math.multiplyExact(seconds, 1000); |
| return Math.addExact(millis, nanos / 1000_000); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Compares this instant to the specified instant. |
| * <p> |
| * The comparison is based on the time-line position of the instants. |
| * It is "consistent with equals", as defined by {@link Comparable}. |
| * |
| * @param otherInstant the other instant to compare to, not null |
| * @return the comparator value, negative if less, positive if greater |
| * @throws NullPointerException if otherInstant is null |
| */ |
| @Override |
| public int compareTo(Instant otherInstant) { |
| int cmp = Long.compare(seconds, otherInstant.seconds); |
| if (cmp != 0) { |
| return cmp; |
| } |
| return nanos - otherInstant.nanos; |
| } |
| |
| /** |
| * Checks if this instant is after the specified instant. |
| * <p> |
| * The comparison is based on the time-line position of the instants. |
| * |
| * @param otherInstant the other instant to compare to, not null |
| * @return true if this instant is after the specified instant |
| * @throws NullPointerException if otherInstant is null |
| */ |
| public boolean isAfter(Instant otherInstant) { |
| return compareTo(otherInstant) > 0; |
| } |
| |
| /** |
| * Checks if this instant is before the specified instant. |
| * <p> |
| * The comparison is based on the time-line position of the instants. |
| * |
| * @param otherInstant the other instant to compare to, not null |
| * @return true if this instant is before the specified instant |
| * @throws NullPointerException if otherInstant is null |
| */ |
| public boolean isBefore(Instant otherInstant) { |
| return compareTo(otherInstant) < 0; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks if this instant is equal to the specified instant. |
| * <p> |
| * The comparison is based on the time-line position of the instants. |
| * |
| * @param other the other instant, null returns false |
| * @return true if the other instant is equal to this one |
| */ |
| @Override |
| public boolean equals(Object other) { |
| if (this == other) { |
| return true; |
| } |
| return (other instanceof Instant otherInstant) |
| && this.seconds == otherInstant.seconds |
| && this.nanos == otherInstant.nanos; |
| } |
| |
| /** |
| * Returns a hash code for this instant. |
| * |
| * @return a suitable hash code |
| */ |
| @Override |
| public int hashCode() { |
| return ((int) (seconds ^ (seconds >>> 32))) + 51 * nanos; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * A string representation of this instant using ISO-8601 representation. |
| * <p> |
| * The format used is the same as {@link DateTimeFormatter#ISO_INSTANT}. |
| * |
| * @return an ISO-8601 representation of this instant, not null |
| */ |
| @Override |
| public String toString() { |
| return DateTimeFormatter.ISO_INSTANT.format(this); |
| } |
| |
| // ----------------------------------------------------------------------- |
| /** |
| * Writes the object using a |
| * <a href="{@docRoot}/serialized-form.html#java.time.Ser">dedicated serialized form</a>. |
| * @serialData |
| * <pre> |
| * out.writeByte(2); // identifies an Instant |
| * out.writeLong(seconds); |
| * out.writeInt(nanos); |
| * </pre> |
| * |
| * @return the instance of {@code Ser}, not null |
| */ |
| @java.io.Serial |
| private Object writeReplace() { |
| return new Ser(Ser.INSTANT_TYPE, this); |
| } |
| |
| /** |
| * Defend against malicious streams. |
| * |
| * @param s the stream to read |
| * @throws InvalidObjectException always |
| */ |
| @java.io.Serial |
| private void readObject(ObjectInputStream s) throws InvalidObjectException { |
| throw new InvalidObjectException("Deserialization via serialization delegate"); |
| } |
| |
| void writeExternal(DataOutput out) throws IOException { |
| out.writeLong(seconds); |
| out.writeInt(nanos); |
| } |
| |
| static Instant readExternal(DataInput in) throws IOException { |
| long seconds = in.readLong(); |
| int nanos = in.readInt(); |
| return Instant.ofEpochSecond(seconds, nanos); |
| } |
| |
| } |
