simpleperf/cmd_inject.cpp

/*
 * Copyright (C) 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <stdint.h>
#include <stdio.h>
#include <unistd.h>

#include <memory>
#include <optional>
#include <string>
#include <thread>

#include <android-base/parseint.h>
#include <android-base/strings.h>

#include "BranchListFile.h"
#include "ETMDecoder.h"
#include "RegEx.h"
#include "ZstdUtil.h"
#include "command.h"
#include "record_file.h"
#include "system/extras/simpleperf/branch_list.pb.h"
#include "thread_tree.h"
#include "utils.h"

namespace simpleperf {

namespace {

using AddrPair = std::pair<uint64_t, uint64_t>;

struct AddrPairHash {
  size_t operator()(const AddrPair& ap) const noexcept {
    size_t seed = 0;
    HashCombine(seed, ap.first);
    HashCombine(seed, ap.second);
    return seed;
  }
};

enum class OutputFormat {
  AutoFDO,
  BOLT,
  BranchList,
};

struct AutoFDOBinaryInfo {
  std::vector<ElfSegment> executable_segments;
  std::unordered_map<uint64_t, uint64_t> address_count_map;
  std::unordered_map<AddrPair, uint64_t, AddrPairHash> range_count_map;
  std::unordered_map<AddrPair, uint64_t, AddrPairHash> branch_count_map;

  void AddAddress(uint64_t addr) { OverflowSafeAdd(address_count_map[addr], 1); }

  void AddRange(uint64_t begin, uint64_t end) {
    OverflowSafeAdd(range_count_map[std::make_pair(begin, end)], 1);
  }

  void AddBranch(uint64_t from, uint64_t to) {
    OverflowSafeAdd(branch_count_map[std::make_pair(from, to)], 1);
  }

  void AddInstrRange(const ETMInstrRange& instr_range) {
    uint64_t total_count = instr_range.branch_taken_count;
    OverflowSafeAdd(total_count, instr_range.branch_not_taken_count);
    OverflowSafeAdd(range_count_map[AddrPair(instr_range.start_addr, instr_range.end_addr)],
                    total_count);
    if (instr_range.branch_taken_count > 0) {
      OverflowSafeAdd(branch_count_map[AddrPair(instr_range.end_addr, instr_range.branch_to_addr)],
                      instr_range.branch_taken_count);
    }
  }

  void Merge(const AutoFDOBinaryInfo& other) {
    for (const auto& p : other.address_count_map) {
      auto res = address_count_map.emplace(p.first, p.second);
      if (!res.second) {
        OverflowSafeAdd(res.first->second, p.second);
      }
    }
    for (const auto& p : other.range_count_map) {
      auto res = range_count_map.emplace(p.first, p.second);
      if (!res.second) {
        OverflowSafeAdd(res.first->second, p.second);
      }
    }
    for (const auto& p : other.branch_count_map) {
      auto res = branch_count_map.emplace(p.first, p.second);
      if (!res.second) {
        OverflowSafeAdd(res.first->second, p.second);
      }
    }
  }

  std::optional<uint64_t> VaddrToOffset(uint64_t vaddr) const {
    for (const auto& segment : executable_segments) {
      if (segment.vaddr <= vaddr && vaddr < segment.vaddr + segment.file_size) {
        return vaddr - segment.vaddr + segment.file_offset;
      }
    }
    return std::nullopt;
  }
};

using AutoFDOBinaryCallback = std::function<void(const BinaryKey&, AutoFDOBinaryInfo&)>;
using ETMBinaryCallback = std::function<void(const BinaryKey&, ETMBinary&)>;
using LBRDataCallback = std::function<void(LBRData&)>;

static std::vector<ElfSegment> GetExecutableSegments(const Dso* dso) {
  std::vector<ElfSegment> segments;
  ElfStatus status;
  if (auto elf = ElfFile::Open(dso->GetDebugFilePath(), &status); elf) {
    segments = elf->GetProgramHeader();
    auto not_executable = [](const ElfSegment& s) { return !s.is_executable; };
    segments.erase(std::remove_if(segments.begin(), segments.end(), not_executable),
                   segments.end());
  }
  return segments;
}

// Base class for reading perf.data and generating AutoFDO or branch list data.
class PerfDataReader {
 public:
  static std::string GetDataType(RecordFileReader& reader) {
    const EventAttrIds& attrs = reader.AttrSection();
    if (attrs.size() != 1) {
      return "unknown";
    }
    const perf_event_attr& attr = attrs[0].attr;
    if (IsEtmEventType(attr.type)) {
      return "etm";
    }
    if (attr.sample_type & PERF_SAMPLE_BRANCH_STACK) {
      return "lbr";
    }
    return "unknown";
  }

  PerfDataReader(std::unique_ptr<RecordFileReader> reader, bool exclude_perf,
                 const RegEx* binary_name_regex)
      : reader_(std::move(reader)),
        exclude_perf_(exclude_perf),
        binary_filter_(binary_name_regex) {}
  virtual ~PerfDataReader() {}

  std::string GetDataType() const { return GetDataType(*reader_); }

  void AddCallback(const AutoFDOBinaryCallback& callback) { autofdo_callback_ = callback; }
  void AddCallback(const ETMBinaryCallback& callback) { etm_binary_callback_ = callback; }
  void AddCallback(const LBRDataCallback& callback) { lbr_data_callback_ = callback; }

  virtual bool Read() {
    if (exclude_perf_) {
      const auto& info_map = reader_->GetMetaInfoFeature();
      if (auto it = info_map.find("recording_process"); it == info_map.end()) {
        LOG(ERROR) << reader_->FileName() << " doesn't support --exclude-perf";
        return false;
      } else {
        int pid;
        if (!android::base::ParseInt(it->second, &pid, 0)) {
          LOG(ERROR) << "invalid recording_process " << it->second << " in " << reader_->FileName();
          return false;
        }
        exclude_pid_ = pid;
      }
    }

    if (!reader_->LoadBuildIdAndFileFeatures(thread_tree_)) {
      return false;
    }
    if (reader_->HasFeature(PerfFileFormat::FEAT_INIT_MAP)) {
      if (!reader_->ReadInitMapFeature([this](auto r) { return ProcessRecord(*r); })) {
        return false;
      }
    }
    if (!reader_->ReadDataSection([this](auto r) { return ProcessRecord(*r); })) {
      return false;
    }
    return PostProcess();
  }

 protected:
  virtual bool ProcessRecord(Record& r) = 0;
  virtual bool PostProcess() = 0;

  void ProcessAutoFDOBinaryInfo() {
    for (auto& p : autofdo_binary_map_) {
      const Dso* dso = p.first;
      AutoFDOBinaryInfo& binary = p.second;
      binary.executable_segments = GetExecutableSegments(dso);
      autofdo_callback_(BinaryKey(dso, 0), binary);
    }
  }

  const std::string data_type_;
  std::unique_ptr<RecordFileReader> reader_;
  bool exclude_perf_;
  BinaryFilter binary_filter_;

  std::optional<int> exclude_pid_;
  ThreadTree thread_tree_;
  AutoFDOBinaryCallback autofdo_callback_;
  ETMBinaryCallback etm_binary_callback_;
  LBRDataCallback lbr_data_callback_;
  // Store results for AutoFDO.
  std::unordered_map<const Dso*, AutoFDOBinaryInfo> autofdo_binary_map_;
};

class ETMThreadTreeWithFilter : public ETMThreadTree {
 public:
  ETMThreadTreeWithFilter(ThreadTree& thread_tree, std::optional<int>& exclude_pid,
                          const std::vector<std::unique_ptr<RegEx>>& exclude_process_names)
      : thread_tree_(thread_tree),
        exclude_pid_(exclude_pid),
        exclude_process_names_(exclude_process_names) {}

  void DisableThreadExitRecords() override { thread_tree_.DisableThreadExitRecords(); }

  const ThreadEntry* FindThread(int tid) override {
    const ThreadEntry* thread = thread_tree_.FindThread(tid);
    if (thread != nullptr && ShouldExcludePid(thread->pid)) {
      return nullptr;
    }
    return thread;
  }

  const MapSet& GetKernelMaps() override { return thread_tree_.GetKernelMaps(); }

 private:
  bool ShouldExcludePid(int pid) {
    if (exclude_pid_ && pid == exclude_pid_) {
      return true;
    }
    if (!exclude_process_names_.empty()) {
      const ThreadEntry* process = thread_tree_.FindThread(pid);
      if (process != nullptr) {
        for (const auto& regex : exclude_process_names_) {
          if (regex->Search(process->comm)) {
            return true;
          }
        }
      }
    }
    return false;
  }

  ThreadTree& thread_tree_;
  std::optional<int>& exclude_pid_;
  const std::vector<std::unique_ptr<RegEx>>& exclude_process_names_;
};

// Read perf.data with ETM data and generate AutoFDO or branch list data.
class ETMPerfDataReader : public PerfDataReader {
 public:
  ETMPerfDataReader(std::unique_ptr<RecordFileReader> reader, bool exclude_perf,
                    const std::vector<std::unique_ptr<RegEx>>& exclude_process_names,
                    const RegEx* binary_name_regex, ETMDumpOption etm_dump_option)
      : PerfDataReader(std::move(reader), exclude_perf, binary_name_regex),
        etm_dump_option_(etm_dump_option),
        etm_thread_tree_(thread_tree_, exclude_pid_, exclude_process_names) {}

  bool Read() override {
    if (reader_->HasFeature(PerfFileFormat::FEAT_ETM_BRANCH_LIST)) {
      return ProcessETMBranchListFeature();
    }
    return PerfDataReader::Read();
  }

 private:
  bool ProcessRecord(Record& r) override {
    thread_tree_.Update(r);
    if (r.type() == PERF_RECORD_AUXTRACE_INFO) {
      etm_decoder_ = ETMDecoder::Create(static_cast<AuxTraceInfoRecord&>(r), etm_thread_tree_);
      if (!etm_decoder_) {
        return false;
      }
      etm_decoder_->EnableDump(etm_dump_option_);
      if (autofdo_callback_) {
        etm_decoder_->RegisterCallback(
            [this](const ETMInstrRange& range) { ProcessInstrRange(range); });
      } else if (etm_binary_callback_) {
        etm_decoder_->RegisterCallback(
            [this](const ETMBranchList& branch) { ProcessETMBranchList(branch); });
      }
    } else if (r.type() == PERF_RECORD_AUX) {
      AuxRecord& aux = static_cast<AuxRecord&>(r);
      if (aux.data->aux_size > SIZE_MAX) {
        LOG(ERROR) << "invalid aux size";
        return false;
      }
      size_t aux_size = aux.data->aux_size;
      if (aux_size > 0) {
        bool error = false;
        if (!reader_->ReadAuxData(aux.Cpu(), aux.data->aux_offset, aux_size, aux_data_buffer_,
                                  error)) {
          return !error;
        }
        if (!etm_decoder_) {
          LOG(ERROR) << "ETMDecoder isn't created";
          return false;
        }
        return etm_decoder_->ProcessData(aux_data_buffer_.data(), aux_size, !aux.Unformatted(),
                                         aux.Cpu());
      }
    } else if (r.type() == PERF_RECORD_MMAP && r.InKernel()) {
      auto& mmap_r = static_cast<MmapRecord&>(r);
      if (android::base::StartsWith(mmap_r.filename, DEFAULT_KERNEL_MMAP_NAME)) {
        kernel_map_start_addr_ = mmap_r.data->addr;
      }
    }
    return true;
  }

  bool PostProcess() override {
    if (etm_decoder_ && !etm_decoder_->FinishData()) {
      return false;
    }
    if (autofdo_callback_) {
      ProcessAutoFDOBinaryInfo();
    } else if (etm_binary_callback_) {
      ProcessETMBinary();
    }
    return true;
  }

  bool ProcessETMBranchListFeature() {
    if (exclude_perf_) {
      LOG(WARNING) << "--exclude-perf has no effect on perf.data with etm branch list";
    }
    if (autofdo_callback_) {
      LOG(ERROR) << "convert to autofdo format isn't support on perf.data with etm branch list";
      return false;
    }
    CHECK(etm_binary_callback_);
    std::string s;
    if (!reader_->ReadFeatureSection(PerfFileFormat::FEAT_ETM_BRANCH_LIST, &s)) {
      return false;
    }
    ETMBinaryMap binary_map;
    if (!StringToETMBinaryMap(s, binary_map)) {
      return false;
    }
    for (auto& [key, binary] : binary_map) {
      if (!binary_filter_.Filter(key.path)) {
        continue;
      }
      etm_binary_callback_(key, binary);
    }
    return true;
  }

  void ProcessInstrRange(const ETMInstrRange& instr_range) {
    if (!binary_filter_.Filter(instr_range.dso)) {
      return;
    }

    autofdo_binary_map_[instr_range.dso].AddInstrRange(instr_range);
  }

  void ProcessETMBranchList(const ETMBranchList& branch_list) {
    if (!binary_filter_.Filter(branch_list.dso)) {
      return;
    }

    auto& branch_map = etm_binary_map_[branch_list.dso].branch_map;
    ++branch_map[branch_list.addr][branch_list.branch];
  }

  void ProcessETMBinary() {
    for (auto& p : etm_binary_map_) {
      Dso* dso = p.first;
      ETMBinary& binary = p.second;
      binary.dso_type = dso->type();
      BinaryKey key(dso, 0);
      if (binary.dso_type == DSO_KERNEL) {
        if (kernel_map_start_addr_ == 0) {
          LOG(WARNING) << "Can't convert kernel ip addresses without kernel start addr. So remove "
                          "branches for the kernel.";
          continue;
        }
        if (dso->GetDebugFilePath() == dso->Path()) {
          // vmlinux isn't available. We still use kernel ip addr. Put kernel start addr in proto
          // for address conversion later.
          key.kernel_start_addr = kernel_map_start_addr_;
        }
      }
      etm_binary_callback_(key, binary);
    }
  }

  ETMDumpOption etm_dump_option_;
  ETMThreadTreeWithFilter etm_thread_tree_;
  std::vector<uint8_t> aux_data_buffer_;
  std::unique_ptr<ETMDecoder> etm_decoder_;
  uint64_t kernel_map_start_addr_ = 0;
  // Store etm branch list data.
  std::unordered_map<Dso*, ETMBinary> etm_binary_map_;
};

static std::optional<std::vector<AutoFDOBinaryInfo>> ConvertLBRDataToAutoFDO(
    const LBRData& lbr_data) {
  std::vector<AutoFDOBinaryInfo> binaries(lbr_data.binaries.size());
  for (const LBRSample& sample : lbr_data.samples) {
    if (sample.binary_id != 0) {
      if (sample.binary_id > binaries.size()) {
        LOG(ERROR) << "binary_id out of range";
        return std::nullopt;
      }
      binaries[sample.binary_id - 1].AddAddress(sample.vaddr_in_file);
    }
    for (size_t i = 0; i < sample.branches.size(); ++i) {
      const LBRBranch& branch = sample.branches[i];
      if (branch.from_binary_id == 0) {
        continue;
      }
      if (branch.from_binary_id > binaries.size()) {
        LOG(ERROR) << "binary_id out of range";
        return std::nullopt;
      }
      if (branch.from_binary_id == branch.to_binary_id) {
        binaries[branch.from_binary_id - 1].AddBranch(branch.from_vaddr_in_file,
                                                      branch.to_vaddr_in_file);
      }
      if (i > 0 && branch.from_binary_id == sample.branches[i - 1].to_binary_id) {
        uint64_t begin = sample.branches[i - 1].to_vaddr_in_file;
        uint64_t end = branch.from_vaddr_in_file;
        // Use the same logic to skip bogus LBR data as AutoFDO.
        if (end < begin || end - begin > (1 << 20)) {
          continue;
        }
        binaries[branch.from_binary_id - 1].AddRange(begin, end);
      }
    }
  }
  return binaries;
}

class LBRPerfDataReader : public PerfDataReader {
 public:
  LBRPerfDataReader(std::unique_ptr<RecordFileReader> reader, bool exclude_perf,
                    const RegEx* binary_name_regex)
      : PerfDataReader(std::move(reader), exclude_perf, binary_name_regex) {}

 private:
  bool ProcessRecord(Record& r) override {
    thread_tree_.Update(r);
    if (r.type() == PERF_RECORD_SAMPLE) {
      auto& sr = static_cast<SampleRecord&>(r);
      ThreadEntry* thread = thread_tree_.FindThread(sr.tid_data.tid);
      if (thread == nullptr) {
        return true;
      }
      auto& stack = sr.branch_stack_data;
      lbr_data_.samples.resize(lbr_data_.samples.size() + 1);
      LBRSample& sample = lbr_data_.samples.back();
      std::pair<uint32_t, uint64_t> binary_addr = IpToBinaryAddr(*thread, sr.ip_data.ip);
      sample.binary_id = binary_addr.first;
      bool has_valid_binary_id = sample.binary_id != 0;
      sample.vaddr_in_file = binary_addr.second;
      sample.branches.resize(stack.stack_nr);
      for (size_t i = 0; i < stack.stack_nr; ++i) {
        uint64_t from_ip = stack.stack[i].from;
        uint64_t to_ip = stack.stack[i].to;
        LBRBranch& branch = sample.branches[i];
        binary_addr = IpToBinaryAddr(*thread, from_ip);
        branch.from_binary_id = binary_addr.first;
        branch.from_vaddr_in_file = binary_addr.second;
        binary_addr = IpToBinaryAddr(*thread, to_ip);
        branch.to_binary_id = binary_addr.first;
        branch.to_vaddr_in_file = binary_addr.second;
        if (branch.from_binary_id != 0 || branch.to_binary_id != 0) {
          has_valid_binary_id = true;
        }
      }
      if (!has_valid_binary_id) {
        lbr_data_.samples.pop_back();
      }
    }
    return true;
  }

  bool PostProcess() override {
    if (autofdo_callback_) {
      std::optional<std::vector<AutoFDOBinaryInfo>> binaries = ConvertLBRDataToAutoFDO(lbr_data_);
      if (!binaries) {
        return false;
      }
      for (const auto& [dso, binary_id] : dso_map_) {
        autofdo_binary_map_[dso] = std::move(binaries.value()[binary_id - 1]);
      }
      ProcessAutoFDOBinaryInfo();
    } else if (lbr_data_callback_) {
      lbr_data_callback_(lbr_data_);
    }
    return true;
  }

  std::pair<uint32_t, uint64_t> IpToBinaryAddr(ThreadEntry& thread, uint64_t ip) {
    const MapEntry* map = thread_tree_.FindMap(&thread, ip);
    Dso* dso = map->dso;
    if (thread_tree_.IsUnknownDso(dso) || !binary_filter_.Filter(dso)) {
      return std::make_pair(0, 0);
    }
    uint32_t binary_id = GetBinaryId(dso);
    uint64_t vaddr_in_file = dso->IpToVaddrInFile(ip, map->start_addr, map->pgoff);
    return std::make_pair(binary_id, vaddr_in_file);
  }

  uint32_t GetBinaryId(const Dso* dso) {
    if (auto it = dso_map_.find(dso); it != dso_map_.end()) {
      return it->second;
    }
    lbr_data_.binaries.emplace_back(dso, 0);
    uint32_t binary_id = static_cast<uint32_t>(lbr_data_.binaries.size());
    dso_map_[dso] = binary_id;
    return binary_id;
  }

  LBRData lbr_data_;
  // Map from dso to binary_id in lbr_data_.
  std::unordered_map<const Dso*, uint32_t> dso_map_;
};

// Read a protobuf file specified by branch_list.proto.
class BranchListReader {
 public:
  BranchListReader(std::string_view filename, const RegEx* binary_name_regex)
      : filename_(filename), binary_filter_(binary_name_regex) {}

  void AddCallback(const ETMBinaryCallback& callback) { etm_binary_callback_ = callback; }
  void AddCallback(const LBRDataCallback& callback) { lbr_data_callback_ = callback; }

  bool Read() {
    auto reader = BranchListProtoReader::CreateForFile(filename_);
    if (!reader) {
      return false;
    }
    ETMBinaryMap etm_data;
    LBRData lbr_data;
    if (!reader->Read(etm_data, lbr_data)) {
      return false;
    }
    if (etm_binary_callback_ && !etm_data.empty()) {
      ProcessETMData(etm_data);
    }
    if (lbr_data_callback_ && !lbr_data.samples.empty()) {
      ProcessLBRData(lbr_data);
    }
    return true;
  }

 private:
  void ProcessETMData(ETMBinaryMap& etm_data) {
    for (auto& [key, binary] : etm_data) {
      if (!binary_filter_.Filter(key.path)) {
        continue;
      }
      etm_binary_callback_(key, binary);
    }
  }

  void ProcessLBRData(LBRData& lbr_data) {
    // 1. Check if we need to remove binaries.
    std::vector<uint32_t> new_ids(lbr_data.binaries.size());
    uint32_t next_id = 1;

    for (size_t i = 0; i < lbr_data.binaries.size(); ++i) {
      if (!binary_filter_.Filter(lbr_data.binaries[i].path)) {
        new_ids[i] = 0;
      } else {
        new_ids[i] = next_id++;
      }
    }

    if (next_id <= lbr_data.binaries.size()) {
      // 2. Modify lbr_data.binaries.
      for (size_t i = 0; i < lbr_data.binaries.size(); ++i) {
        if (new_ids[i] != 0) {
          size_t new_pos = new_ids[i] - 1;
          lbr_data.binaries[new_pos] = lbr_data.binaries[i];
        }
      }
      lbr_data.binaries.resize(next_id - 1);

      // 3. Modify lbr_data.samples.
      auto convert_id = [&](uint32_t& binary_id) {
        if (binary_id != 0) {
          binary_id = (binary_id <= new_ids.size()) ? new_ids[binary_id - 1] : 0;
        }
      };
      std::vector<LBRSample> new_samples;
      for (LBRSample& sample : lbr_data.samples) {
        convert_id(sample.binary_id);
        bool has_valid_binary_id = sample.binary_id != 0;
        for (LBRBranch& branch : sample.branches) {
          convert_id(branch.from_binary_id);
          convert_id(branch.to_binary_id);
          if (branch.from_binary_id != 0 || branch.to_binary_id != 0) {
            has_valid_binary_id = true;
          }
        }
        if (has_valid_binary_id) {
          new_samples.emplace_back(std::move(sample));
        }
      }
      lbr_data.samples = std::move(new_samples);
    }
    lbr_data_callback_(lbr_data);
  }

  const std::string filename_;
  BinaryFilter binary_filter_;
  ETMBinaryCallback etm_binary_callback_;
  LBRDataCallback lbr_data_callback_;
};

// Convert ETMBinary into AutoFDOBinaryInfo.
class ETMBranchListToAutoFDOConverter {
 public:
  std::unique_ptr<AutoFDOBinaryInfo> Convert(const BinaryKey& key, ETMBinary& binary) {
    BuildId build_id = key.build_id;
    std::unique_ptr<Dso> dso = Dso::CreateDsoWithBuildId(binary.dso_type, key.path, build_id);
    if (!dso || !CheckBuildId(dso.get(), key.build_id)) {
      return nullptr;
    }
    std::unique_ptr<AutoFDOBinaryInfo> autofdo_binary(new AutoFDOBinaryInfo);
    autofdo_binary->executable_segments = GetExecutableSegments(dso.get());

    if (dso->type() == DSO_KERNEL) {
      CHECK_EQ(key.kernel_start_addr, 0);
    }

    auto process_instr_range = [&](const ETMInstrRange& range) {
      autofdo_binary->AddInstrRange(range);
    };

    auto result = ConvertETMBranchMapToInstrRanges(dso.get(), binary.GetOrderedBranchMap(),
                                                   process_instr_range);
    if (!result.ok()) {
      LOG(WARNING) << "failed to build instr ranges for binary " << dso->Path() << ": "
                   << result.error();
      return nullptr;
    }
    return autofdo_binary;
  }

 private:
  bool CheckBuildId(Dso* dso, const BuildId& expected_build_id) {
    if (expected_build_id.IsEmpty()) {
      return true;
    }
    BuildId build_id;
    return GetBuildIdFromDsoPath(dso->GetDebugFilePath(), &build_id) &&
           build_id == expected_build_id;
  }
};

// Write instruction ranges to a file in AutoFDO text format.
class AutoFDOWriter {
 public:
  void AddAutoFDOBinary(const BinaryKey& key, AutoFDOBinaryInfo& binary) {
    auto it = binary_map_.find(key);
    if (it == binary_map_.end()) {
      binary_map_[key] = std::move(binary);
    } else {
      it->second.Merge(binary);
    }
  }

  bool WriteAutoFDO(const std::string& output_filename) {
    std::unique_ptr<FILE, decltype(&fclose)> output_fp(fopen(output_filename.c_str(), "w"), fclose);
    if (!output_fp) {
      PLOG(ERROR) << "failed to write to " << output_filename;
      return false;
    }
    // autofdo_binary_map is used to store instruction ranges, which can have a large amount. And
    // it has a larger access time (instruction ranges * executed time). So it's better to use
    // unorder_maps to speed up access time. But we also want a stable output here, to compare
    // output changes result from code changes. So generate a sorted output here.
    std::vector<BinaryKey> keys;
    for (auto& p : binary_map_) {
      keys.emplace_back(p.first);
    }
    std::sort(keys.begin(), keys.end(),
              [](const BinaryKey& key1, const BinaryKey& key2) { return key1.path < key2.path; });
    if (keys.size() > 1) {
      fprintf(output_fp.get(),
              "// Please split this file. AutoFDO only accepts profile for one binary.\n");
    }
    for (const auto& key : keys) {
      const AutoFDOBinaryInfo& binary = binary_map_[key];
      // AutoFDO text format needs file_offsets instead of virtual addrs in a binary. So convert
      // vaddrs to file offsets.

      // Write range_count_map. Sort the output by addrs.
      std::vector<std::pair<AddrPair, uint64_t>> range_counts;
      for (std::pair<AddrPair, uint64_t> p : binary.range_count_map) {
        std::optional<uint64_t> start_offset = binary.VaddrToOffset(p.first.first);
        std::optional<uint64_t> end_offset = binary.VaddrToOffset(p.first.second);
        if (start_offset && end_offset) {
          p.first.first = start_offset.value();
          p.first.second = end_offset.value();
          range_counts.emplace_back(p);
        }
      }
      std::sort(range_counts.begin(), range_counts.end());
      fprintf(output_fp.get(), "%zu\n", range_counts.size());
      for (const auto& p : range_counts) {
        fprintf(output_fp.get(), "%" PRIx64 "-%" PRIx64 ":%" PRIu64 "\n", p.first.first,
                p.first.second, p.second);
      }

      // Write addr_count_map. Sort the output by addrs.
      std::vector<std::pair<uint64_t, uint64_t>> address_counts;
      for (std::pair<uint64_t, uint64_t> p : binary.address_count_map) {
        std::optional<uint64_t> offset = binary.VaddrToOffset(p.first);
        if (offset) {
          p.first = offset.value();
          address_counts.emplace_back(p);
        }
      }
      std::sort(address_counts.begin(), address_counts.end());
      fprintf(output_fp.get(), "%zu\n", address_counts.size());
      for (const auto& p : address_counts) {
        fprintf(output_fp.get(), "%" PRIx64 ":%" PRIu64 "\n", p.first, p.second);
      }

      // Write branch_count_map. Sort the output by addrs.
      std::vector<std::pair<AddrPair, uint64_t>> branch_counts;
      for (std::pair<AddrPair, uint64_t> p : binary.branch_count_map) {
        std::optional<uint64_t> from_offset = binary.VaddrToOffset(p.first.first);
        std::optional<uint64_t> to_offset = binary.VaddrToOffset(p.first.second);
        if (from_offset) {
          p.first.first = from_offset.value();
          p.first.second = to_offset ? to_offset.value() : 0;
          branch_counts.emplace_back(p);
        }
      }
      std::sort(branch_counts.begin(), branch_counts.end());
      fprintf(output_fp.get(), "%zu\n", branch_counts.size());
      for (const auto& p : branch_counts) {
        fprintf(output_fp.get(), "%" PRIx64 "->%" PRIx64 ":%" PRIu64 "\n", p.first.first,
                p.first.second, p.second);
      }

      // Write the binary path in comment.
      fprintf(output_fp.get(), "// build_id: %s\n", key.build_id.ToString().c_str());
      fprintf(output_fp.get(), "// %s\n\n", key.path.c_str());
    }
    return true;
  }

  // Write bolt profile in format documented in
  // https://github.com/llvm/llvm-project/blob/main/bolt/include/bolt/Profile/DataAggregator.h#L372.
  bool WriteBolt(const std::string& output_filename) {
    std::unique_ptr<FILE, decltype(&fclose)> output_fp(fopen(output_filename.c_str(), "w"), fclose);
    if (!output_fp) {
      PLOG(ERROR) << "failed to write to " << output_filename;
      return false;
    }
    // autofdo_binary_map is used to store instruction ranges, which can have a large amount. And
    // it has a larger access time (instruction ranges * executed time). So it's better to use
    // unorder_maps to speed up access time. But we also want a stable output here, to compare
    // output changes result from code changes. So generate a sorted output here.
    std::vector<BinaryKey> keys;
    for (auto& p : binary_map_) {
      keys.emplace_back(p.first);
    }
    std::sort(keys.begin(), keys.end(),
              [](const BinaryKey& key1, const BinaryKey& key2) { return key1.path < key2.path; });
    if (keys.size() > 1) {
      fprintf(output_fp.get(),
              "// Please split this file. BOLT only accepts profile for one binary.\n");
    }

    for (const auto& key : keys) {
      const AutoFDOBinaryInfo& binary = binary_map_[key];
      // Write range_count_map. Sort the output by addrs.
      std::vector<std::pair<AddrPair, uint64_t>> range_counts;
      for (const auto& p : binary.range_count_map) {
        range_counts.emplace_back(p);
      }
      std::sort(range_counts.begin(), range_counts.end());
      for (const auto& p : range_counts) {
        fprintf(output_fp.get(), "F %" PRIx64 " %" PRIx64 " %" PRIu64 "\n", p.first.first,
                p.first.second, p.second);
      }

      // Write branch_count_map. Sort the output by addrs.
      std::vector<std::pair<AddrPair, uint64_t>> branch_counts;
      for (const auto& p : binary.branch_count_map) {
        branch_counts.emplace_back(p);
      }
      std::sort(branch_counts.begin(), branch_counts.end());
      for (const auto& p : branch_counts) {
        fprintf(output_fp.get(), "B %" PRIx64 " %" PRIx64 " %" PRIu64 " 0\n", p.first.first,
                p.first.second, p.second);
      }

      // Write the binary path in comment.
      fprintf(output_fp.get(), "// build_id: %s\n", key.build_id.ToString().c_str());
      fprintf(output_fp.get(), "// %s\n", key.path.c_str());
    }
    return true;
  }

 private:
  std::unordered_map<BinaryKey, AutoFDOBinaryInfo, BinaryKeyHash> binary_map_;
};

// Merge branch list data.
struct BranchListMerger {
  void AddETMBinary(const BinaryKey& key, ETMBinary& binary) {
    if (auto it = etm_data_.find(key); it != etm_data_.end()) {
      it->second.Merge(binary);
    } else {
      etm_data_[key] = std::move(binary);
    }
  }

  void AddLBRData(LBRData& lbr_data) {
    // 1. Merge binaries.
    std::vector<uint32_t> new_ids(lbr_data.binaries.size());
    for (size_t i = 0; i < lbr_data.binaries.size(); i++) {
      const BinaryKey& key = lbr_data.binaries[i];
      if (auto it = lbr_binary_id_map_.find(key); it != lbr_binary_id_map_.end()) {
        new_ids[i] = it->second;
      } else {
        uint32_t next_id = static_cast<uint32_t>(lbr_binary_id_map_.size()) + 1;
        new_ids[i] = next_id;
        lbr_binary_id_map_[key] = next_id;
        lbr_data_.binaries.emplace_back(key);
      }
    }

    // 2. Merge samples.
    auto convert_id = [&](uint32_t& binary_id) {
      if (binary_id != 0) {
        binary_id = (binary_id <= new_ids.size()) ? new_ids[binary_id - 1] : 0;
      }
    };

    for (LBRSample& sample : lbr_data.samples) {
      convert_id(sample.binary_id);
      for (LBRBranch& branch : sample.branches) {
        convert_id(branch.from_binary_id);
        convert_id(branch.to_binary_id);
      }
      lbr_data_.samples.emplace_back(std::move(sample));
    }
  }

  void Merge(BranchListMerger& other) {
    for (auto& p : other.GetETMData()) {
      AddETMBinary(p.first, p.second);
    }
    AddLBRData(other.GetLBRData());
  }

  ETMBinaryMap& GetETMData() { return etm_data_; }

  LBRData& GetLBRData() { return lbr_data_; }

 private:
  ETMBinaryMap etm_data_;
  LBRData lbr_data_;
  std::unordered_map<BinaryKey, uint32_t, BinaryKeyHash> lbr_binary_id_map_;
};

// Read multiple branch list files and merge them using BranchListMerger.
class BranchListMergedReader {
 public:
  BranchListMergedReader(bool allow_mismatched_build_id, const RegEx* binary_name_regex,
                         size_t jobs)
      : allow_mismatched_build_id_(allow_mismatched_build_id),
        binary_name_regex_(binary_name_regex),
        jobs_(jobs) {}

  std::unique_ptr<BranchListMerger> Read(const std::vector<std::string>& input_filenames) {
    std::mutex input_file_mutex;
    size_t input_file_index = 0;
    auto get_input_file = [&]() -> std::string_view {
      std::lock_guard<std::mutex> guard(input_file_mutex);
      if (input_file_index == input_filenames.size()) {
        return "";
      }
      if ((input_file_index + 1) % 100 == 0) {
        LOG(VERBOSE) << "Read input file " << (input_file_index + 1) << "/"
                     << input_filenames.size();
      }
      return input_filenames[input_file_index++];
    };

    std::atomic_size_t failed_to_read_count = 0;
    size_t thread_count = std::min(jobs_, input_filenames.size()) - 1;
    std::vector<BranchListMerger> thread_mergers(thread_count);
    std::vector<std::unique_ptr<std::thread>> threads;

    for (size_t i = 0; i < thread_count; i++) {
      threads.emplace_back(new std::thread([&, i]() {
        ReadInThreadFunction(get_input_file, thread_mergers[i], failed_to_read_count);
      }));
    }
    auto merger = std::make_unique<BranchListMerger>();
    ReadInThreadFunction(get_input_file, *merger, failed_to_read_count);
    for (size_t i = 0; i < thread_count; i++) {
      threads[i]->join();
      merger->Merge(thread_mergers[i]);
    }
    if (failed_to_read_count == input_filenames.size()) {
      LOG(ERROR) << "No valid input file";
      return nullptr;
    }
    return merger;
  }

 private:
  void ReadInThreadFunction(const std::function<std::string_view()>& get_input_file,
                            BranchListMerger& merger, std::atomic_size_t& failed_to_read_count) {
    auto etm_callback = [&](const BinaryKey& key, ETMBinary& binary) {
      BinaryKey new_key = key;
      if (allow_mismatched_build_id_) {
        new_key.build_id = BuildId();
      }
      if (binary.dso_type == DsoType::DSO_KERNEL) {
        ModifyBranchMapForKernel(new_key, binary);
      }
      merger.AddETMBinary(new_key, binary);
    };
    auto lbr_callback = [&](LBRData& lbr_data) {
      if (allow_mismatched_build_id_) {
        for (BinaryKey& key : lbr_data.binaries) {
          key.build_id = BuildId();
        }
      }
      merger.AddLBRData(lbr_data);
    };
    while (true) {
      std::string_view input_file = get_input_file();
      if (input_file.empty()) {
        break;
      }
      BranchListReader reader(input_file, binary_name_regex_);
      reader.AddCallback(etm_callback);
      reader.AddCallback(lbr_callback);
      if (!reader.Read()) {
        failed_to_read_count++;
      }
    }
  }

  void ModifyBranchMapForKernel(BinaryKey& key, ETMBinary& binary) {
    if (key.kernel_start_addr == 0) {
      // vmlinux has been provided when generating branch lists. Addresses in branch lists are
      // already vaddrs in vmlinux.
      return;
    }
    {
      std::lock_guard<std::mutex> guard(kernel_dso_mutex_);
      if (!kernel_dso_) {
        BuildId build_id = key.build_id;
        kernel_dso_ = Dso::CreateDsoWithBuildId(binary.dso_type, key.path, build_id);
        if (!kernel_dso_) {
          return;
        }
        // Call IpToVaddrInFile once to initialize kernel start addr from vmlinux.
        kernel_dso_->IpToVaddrInFile(0, key.kernel_start_addr, 0);
      }
    }
    // Addresses are still kernel ip addrs in memory. Need to convert them to vaddrs in vmlinux.
    UnorderedETMBranchMap new_branch_map;
    for (auto& p : binary.branch_map) {
      uint64_t vaddr_in_file = kernel_dso_->IpToVaddrInFile(p.first, key.kernel_start_addr, 0);
      new_branch_map[vaddr_in_file] = std::move(p.second);
    }
    binary.branch_map = std::move(new_branch_map);
    key.kernel_start_addr = 0;
  }

  const bool allow_mismatched_build_id_;
  const RegEx* binary_name_regex_;
  size_t jobs_;
  std::unique_ptr<Dso> kernel_dso_;
  std::mutex kernel_dso_mutex_;
};

// Write branch lists to a protobuf file specified by branch_list.proto.
static bool WriteBranchListFile(const std::string& output_filename, const ETMBinaryMap& etm_data,
                                const LBRData& lbr_data, bool compress) {
  auto writer = BranchListProtoWriter::CreateForFile(output_filename, compress);
  if (!writer) {
    return false;
  }
  if (!etm_data.empty()) {
    return writer->Write(etm_data);
  }
  if (!lbr_data.samples.empty()) {
    return writer->Write(lbr_data);
  }
  // Don't produce empty output file.
  LOG(INFO) << "Skip empty output file.";
  unlink(output_filename.c_str());
  return true;
}

class InjectCommand : public Command {
 public:
  InjectCommand()
      : Command("inject", "parse etm instruction tracing data",
                // clang-format off
"Usage: simpleperf inject [options]\n"
"--binary binary_name         Generate data only for binaries matching binary_name regex.\n"
"-i file1,file2,...           Input files. Default is perf.data. Support below formats:\n"
"                               1. perf.data generated by recording cs-etm event type.\n"
"                               2. branch_list file generated by `inject --output branch-list`.\n"
"                             If a file name starts with @, it contains a list of input files.\n"
"-o <file>                    output file. Default is perf_inject.data.\n"
"--output <format>            Select output file format:\n"
"                               autofdo      -- text format accepted by TextSampleReader\n"
"                                               of AutoFDO\n"
"                               bolt         -- text format accepted by `perf2bolt --pa`\n"
"                               branch-list  -- protobuf file in etm_branch_list.proto\n"
"                             Default is autofdo.\n"
"--dump-etm type1,type2,...   Dump etm data. A type is one of raw, packet and element.\n"
"--exclude-perf               Exclude trace data for the recording process.\n"
"--exclude-process-name process_name_regex      Exclude data for processes with name containing\n"
"                                               the regular expression.\n"
"--symdir <dir>               Look for binaries in a directory recursively.\n"
"--allow-mismatched-build-id  Allow mismatched build ids when searching for debug binaries.\n"
"-j <jobs>                    Use multiple threads to process branch list files.\n"
"-z                           Compress branch-list output\n"
"--dump <file>                Dump a branch list file.\n"
"\n"
"Examples:\n"
"1. Generate autofdo text output.\n"
"$ simpleperf inject -i perf.data -o autofdo.txt --output autofdo\n"
"\n"
"2. Generate branch list proto, then convert to autofdo text.\n"
"$ simpleperf inject -i perf.data -o branch_list.data --output branch-list\n"
"$ simpleperf inject -i branch_list.data -o autofdo.txt --output autofdo\n"
                // clang-format on
        ) {}

  bool Run(const std::vector<std::string>& args) override {
    GOOGLE_PROTOBUF_VERIFY_VERSION;
    if (!ParseOptions(args)) {
      return false;
    }
    if (!dump_branch_list_file_.empty()) {
      return DumpBranchListFile(dump_branch_list_file_);
    }

    CHECK(!input_filenames_.empty());
    if (IsPerfDataFile(input_filenames_[0])) {
      switch (output_format_) {
        case OutputFormat::AutoFDO:
          [[fallthrough]];
        case OutputFormat::BOLT:
          return ConvertPerfDataToAutoFDO();
        case OutputFormat::BranchList:
          return ConvertPerfDataToBranchList();
      }
    } else {
      switch (output_format_) {
        case OutputFormat::AutoFDO:
          [[fallthrough]];
        case OutputFormat::BOLT:
          return ConvertBranchListToAutoFDO();
        case OutputFormat::BranchList:
          return ConvertBranchListToBranchList();
      }
    }
  }

 private:
  bool ParseOptions(const std::vector<std::string>& args) {
    const OptionFormatMap option_formats = {
        {"--allow-mismatched-build-id", {OptionValueType::NONE, OptionType::SINGLE}},
        {"--binary", {OptionValueType::STRING, OptionType::SINGLE}},
        {"--dump", {OptionValueType::STRING, OptionType::SINGLE}},
        {"--dump-etm", {OptionValueType::STRING, OptionType::SINGLE}},
        {"--exclude-perf", {OptionValueType::NONE, OptionType::SINGLE}},
        {"--exclude-process-name", {OptionValueType::STRING, OptionType::MULTIPLE}},
        {"-i", {OptionValueType::STRING, OptionType::MULTIPLE}},
        {"-j", {OptionValueType::UINT, OptionType::SINGLE}},
        {"-o", {OptionValueType::STRING, OptionType::SINGLE}},
        {"--output", {OptionValueType::STRING, OptionType::SINGLE}},
        {"--symdir", {OptionValueType::STRING, OptionType::MULTIPLE}},
        {"-z", {OptionValueType::NONE, OptionType::SINGLE}},
    };
    OptionValueMap options;
    std::vector<std::pair<OptionName, OptionValue>> ordered_options;
    if (!PreprocessOptions(args, option_formats, &options, &ordered_options, nullptr)) {
      return false;
    }

    if (options.PullBoolValue("--allow-mismatched-build-id")) {
      allow_mismatched_build_id_ = true;
      Dso::AllowMismatchedBuildId();
    }
    if (auto value = options.PullValue("--binary"); value) {
      binary_name_regex_ = RegEx::Create(value->str_value);
      if (binary_name_regex_ == nullptr) {
        return false;
      }
    }
    options.PullStringValue("--dump", &dump_branch_list_file_);
    if (auto value = options.PullValue("--dump-etm"); value) {
      if (!ParseEtmDumpOption(value->str_value, &etm_dump_option_)) {
        return false;
      }
    }
    exclude_perf_ = options.PullBoolValue("--exclude-perf");
    for (const std::string& value : options.PullStringValues("--exclude-process-name")) {
      std::unique_ptr<RegEx> regex = RegEx::Create(value);
      if (regex == nullptr) {
        return false;
      }
      exclude_process_names_.emplace_back(std::move(regex));
    }

    for (const OptionValue& value : options.PullValues("-i")) {
      std::vector<std::string> files = android::base::Split(value.str_value, ",");
      for (std::string& file : files) {
        if (android::base::StartsWith(file, "@")) {
          if (!ReadFileList(file.substr(1), &input_filenames_)) {
            return false;
          }
        } else {
          input_filenames_.emplace_back(file);
        }
      }
    }
    if (input_filenames_.empty()) {
      input_filenames_.emplace_back("perf.data");
    }
    if (!options.PullUintValue("-j", &jobs_, 1)) {
      return false;
    }
    options.PullStringValue("-o", &output_filename_);
    if (auto value = options.PullValue("--output"); value) {
      const std::string& output = value->str_value;
      if (output == "autofdo") {
        output_format_ = OutputFormat::AutoFDO;
      } else if (output == "bolt") {
        output_format_ = OutputFormat::BOLT;
      } else if (output == "branch-list") {
        output_format_ = OutputFormat::BranchList;
      } else {
        LOG(ERROR) << "unknown format in --output option: " << output;
        return false;
      }
    }
    if (std::vector<OptionValue> values = options.PullValues("--symdir"); !values.empty()) {
      for (const OptionValue& value : values) {
        if (!Dso::AddSymbolDir(value.str_value)) {
          return false;
        }
      }
      // Symbol dirs are cleaned when Dso count is decreased to zero, which can happen between
      // processing input files. To make symbol dirs always available, create a placeholder dso to
      // prevent cleaning from happening.
      placeholder_dso_ = Dso::CreateDso(DSO_UNKNOWN_FILE, "unknown");
    }
    compress_ = options.PullBoolValue("-z");
    CHECK(options.values.empty());
    return true;
  }

  bool ReadFileList(const std::string& path, std::vector<std::string>* file_list) {
    std::string data;
    if (!android::base::ReadFileToString(path, &data)) {
      PLOG(ERROR) << "failed to read " << path;
      return false;
    }
    std::vector<std::string> tokens = android::base::Tokenize(data, " \t\n\r");
    file_list->insert(file_list->end(), tokens.begin(), tokens.end());
    return true;
  }

  bool ReadPerfDataFiles(const std::function<void(PerfDataReader&)> reader_callback) {
    if (input_filenames_.empty()) {
      return true;
    }

    std::string expected_data_type;
    for (const auto& filename : input_filenames_) {
      std::unique_ptr<RecordFileReader> file_reader = RecordFileReader::CreateInstance(filename);
      if (!file_reader) {
        return false;
      }
      std::string data_type = PerfDataReader::GetDataType(*file_reader);
      if (expected_data_type.empty()) {
        expected_data_type = data_type;
      } else if (expected_data_type != data_type) {
        LOG(ERROR) << "files have different data type: " << input_filenames_[0] << ", " << filename;
        return false;
      }
      std::unique_ptr<PerfDataReader> reader;
      if (data_type == "etm") {
        reader.reset(new ETMPerfDataReader(std::move(file_reader), exclude_perf_,
                                           exclude_process_names_, binary_name_regex_.get(),
                                           etm_dump_option_));
      } else if (data_type == "lbr") {
        reader.reset(
            new LBRPerfDataReader(std::move(file_reader), exclude_perf_, binary_name_regex_.get()));
      } else {
        LOG(ERROR) << "unsupported data type " << data_type << " in " << filename;
        return false;
      }
      reader_callback(*reader);
      if (!reader->Read()) {
        return false;
      }
    }
    return true;
  }

  bool ConvertPerfDataToAutoFDO() {
    AutoFDOWriter autofdo_writer;
    auto afdo_callback = [&](const BinaryKey& key, AutoFDOBinaryInfo& binary) {
      autofdo_writer.AddAutoFDOBinary(key, binary);
    };
    auto reader_callback = [&](PerfDataReader& reader) { reader.AddCallback(afdo_callback); };
    if (!ReadPerfDataFiles(reader_callback)) {
      return false;
    }
    if (output_format_ == OutputFormat::AutoFDO) {
      return autofdo_writer.WriteAutoFDO(output_filename_);
    }
    CHECK(output_format_ == OutputFormat::BOLT);
    return autofdo_writer.WriteBolt(output_filename_);
  }

  bool ConvertPerfDataToBranchList() {
    BranchListMerger merger;
    auto etm_callback = [&](const BinaryKey& key, ETMBinary& binary) {
      merger.AddETMBinary(key, binary);
    };
    auto lbr_callback = [&](LBRData& lbr_data) { merger.AddLBRData(lbr_data); };

    auto reader_callback = [&](PerfDataReader& reader) {
      reader.AddCallback(etm_callback);
      reader.AddCallback(lbr_callback);
    };
    if (!ReadPerfDataFiles(reader_callback)) {
      return false;
    }
    return WriteBranchListFile(output_filename_, merger.GetETMData(), merger.GetLBRData(),
                               compress_);
  }

  bool ConvertBranchListToAutoFDO() {
    // Step1 : Merge branch lists from all input files.
    BranchListMergedReader reader(allow_mismatched_build_id_, binary_name_regex_.get(), jobs_);
    std::unique_ptr<BranchListMerger> merger = reader.Read(input_filenames_);
    if (!merger) {
      return false;
    }

    // Step2: Convert ETMBinary and LBRData to AutoFDOBinaryInfo.
    AutoFDOWriter autofdo_writer;
    ETMBranchListToAutoFDOConverter converter;
    for (auto& p : merger->GetETMData()) {
      const BinaryKey& key = p.first;
      ETMBinary& binary = p.second;
      std::unique_ptr<AutoFDOBinaryInfo> autofdo_binary = converter.Convert(key, binary);
      if (autofdo_binary) {
        // Create new BinaryKey with kernel_start_addr = 0. Because AutoFDO output doesn't care
        // kernel_start_addr.
        autofdo_writer.AddAutoFDOBinary(BinaryKey(key.path, key.build_id), *autofdo_binary);
      }
    }
    if (!merger->GetLBRData().samples.empty()) {
      LBRData& lbr_data = merger->GetLBRData();
      std::optional<std::vector<AutoFDOBinaryInfo>> binaries = ConvertLBRDataToAutoFDO(lbr_data);
      if (!binaries) {
        return false;
      }
      for (size_t i = 0; i < binaries.value().size(); ++i) {
        BinaryKey& key = lbr_data.binaries[i];
        AutoFDOBinaryInfo& binary = binaries.value()[i];
        std::unique_ptr<Dso> dso = Dso::CreateDsoWithBuildId(DSO_ELF_FILE, key.path, key.build_id);
        if (!dso) {
          continue;
        }
        binary.executable_segments = GetExecutableSegments(dso.get());
        autofdo_writer.AddAutoFDOBinary(key, binary);
      }
    }

    // Step3: Write AutoFDOBinaryInfo.
    if (output_format_ == OutputFormat::AutoFDO) {
      return autofdo_writer.WriteAutoFDO(output_filename_);
    }
    CHECK(output_format_ == OutputFormat::BOLT);
    return autofdo_writer.WriteBolt(output_filename_);
  }

  bool ConvertBranchListToBranchList() {
    // Step1 : Merge branch lists from all input files.
    BranchListMergedReader reader(allow_mismatched_build_id_, binary_name_regex_.get(), jobs_);
    std::unique_ptr<BranchListMerger> merger = reader.Read(input_filenames_);
    if (!merger) {
      return false;
    }
    // Step2: Write ETMBinary.
    return WriteBranchListFile(output_filename_, merger->GetETMData(), merger->GetLBRData(),
                               compress_);
  }

  std::unique_ptr<RegEx> binary_name_regex_;
  bool exclude_perf_ = false;
  std::vector<std::unique_ptr<RegEx>> exclude_process_names_;
  std::vector<std::string> input_filenames_;
  std::string output_filename_ = "perf_inject.data";
  OutputFormat output_format_ = OutputFormat::AutoFDO;
  ETMDumpOption etm_dump_option_;
  bool compress_ = false;
  bool allow_mismatched_build_id_ = false;
  size_t jobs_ = 1;
  std::string dump_branch_list_file_;

  std::unique_ptr<Dso> placeholder_dso_;
};

}  // namespace

void RegisterInjectCommand() {
  return RegisterCommand("inject", [] { return std::unique_ptr<Command>(new InjectCommand); });
}

}  // namespace simpleperf