| ''' pydevd - a debugging daemon |
| This is the daemon you launch for python remote debugging. |
| |
| Protocol: |
| each command has a format: |
| id\tsequence-num\ttext |
| id: protocol command number |
| sequence-num: each request has a sequence number. Sequence numbers |
| originating at the debugger are odd, sequence numbers originating |
| at the daemon are even. Every response uses the same sequence number |
| as the request. |
| payload: it is protocol dependent. When response is a complex structure, it |
| is returned as XML. Each attribute value is urlencoded, and then the whole |
| payload is urlencoded again to prevent stray characters corrupting protocol/xml encodings |
| |
| Commands: |
| |
| NUMBER NAME FROM* ARGUMENTS RESPONSE NOTE |
| 100 series: program execution |
| 101 RUN JAVA - - |
| 102 LIST_THREADS JAVA RETURN with XML listing of all threads |
| 103 THREAD_CREATE PYDB - XML with thread information |
| 104 THREAD_KILL JAVA id (or * to exit) kills the thread |
| PYDB id nofies JAVA that thread was killed |
| 105 THREAD_SUSPEND JAVA XML of the stack, suspends the thread |
| reason for suspension |
| PYDB id notifies JAVA that thread was suspended |
| |
| 106 CMD_THREAD_RUN JAVA id resume the thread |
| PYDB id \t reason notifies JAVA that thread was resumed |
| |
| 107 STEP_INTO JAVA thread_id |
| 108 STEP_OVER JAVA thread_id |
| 109 STEP_RETURN JAVA thread_id |
| |
| 110 GET_VARIABLE JAVA thread_id \t frame_id \t GET_VARIABLE with XML of var content |
| FRAME|GLOBAL \t attributes* |
| |
| 111 SET_BREAK JAVA file/line of the breakpoint |
| 112 REMOVE_BREAK JAVA file/line of the return |
| 113 CMD_EVALUATE_EXPRESSION JAVA expression result of evaluating the expression |
| 114 CMD_GET_FRAME JAVA request for frame contents |
| 115 CMD_EXEC_EXPRESSION JAVA |
| 116 CMD_WRITE_TO_CONSOLE PYDB |
| 117 CMD_CHANGE_VARIABLE |
| 118 CMD_RUN_TO_LINE |
| 119 CMD_RELOAD_CODE |
| 120 CMD_GET_COMPLETIONS JAVA |
| |
| 500 series diagnostics/ok |
| 501 VERSION either Version string (1.0) Currently just used at startup |
| 502 RETURN either Depends on caller - |
| |
| 900 series: errors |
| 901 ERROR either - This is reserved for unexpected errors. |
| |
| * JAVA - remote debugger, the java end |
| * PYDB - pydevd, the python end |
| ''' |
| from pydevd_constants import * #@UnusedWildImport |
| |
| import sys |
| |
| if USE_LIB_COPY: |
| import _pydev_time as time |
| import _pydev_threading as threading |
| try: |
| import _pydev_thread as thread |
| except ImportError: |
| import _thread as thread #Py3K changed it. |
| import _pydev_Queue as _queue |
| from _pydev_socket import socket |
| from _pydev_socket import AF_INET, SOCK_STREAM |
| from _pydev_socket import SHUT_RD, SHUT_WR |
| else: |
| import time |
| import threading |
| try: |
| import thread |
| except ImportError: |
| import _thread as thread #Py3K changed it. |
| |
| try: |
| import Queue as _queue |
| except ImportError: |
| import queue as _queue |
| from socket import socket |
| from socket import AF_INET, SOCK_STREAM |
| from socket import SHUT_RD, SHUT_WR |
| |
| try: |
| from urllib import quote |
| except: |
| from urllib.parse import quote #@Reimport @UnresolvedImport |
| |
| import pydevd_vars |
| import pydev_log |
| import pydevd_tracing |
| import pydevd_vm_type |
| import pydevd_file_utils |
| import traceback |
| from pydevd_utils import * |
| from pydevd_utils import quote_smart as quote |
| |
| |
| from pydevd_tracing import GetExceptionTracebackStr |
| import pydevconsole |
| |
| try: |
| _Thread_stop = threading.Thread._Thread__stop |
| except AttributeError: |
| _Thread_stop = threading.Thread._stop # _stop in Python 3 |
| |
| |
| |
| CMD_RUN = 101 |
| CMD_LIST_THREADS = 102 |
| CMD_THREAD_CREATE = 103 |
| CMD_THREAD_KILL = 104 |
| CMD_THREAD_SUSPEND = 105 |
| CMD_THREAD_RUN = 106 |
| CMD_STEP_INTO = 107 |
| CMD_STEP_OVER = 108 |
| CMD_STEP_RETURN = 109 |
| CMD_GET_VARIABLE = 110 |
| CMD_SET_BREAK = 111 |
| CMD_REMOVE_BREAK = 112 |
| CMD_EVALUATE_EXPRESSION = 113 |
| CMD_GET_FRAME = 114 |
| CMD_EXEC_EXPRESSION = 115 |
| CMD_WRITE_TO_CONSOLE = 116 |
| CMD_CHANGE_VARIABLE = 117 |
| CMD_RUN_TO_LINE = 118 |
| CMD_RELOAD_CODE = 119 |
| CMD_GET_COMPLETIONS = 120 |
| CMD_CONSOLE_EXEC = 121 |
| CMD_ADD_EXCEPTION_BREAK = 122 |
| CMD_REMOVE_EXCEPTION_BREAK = 123 |
| CMD_LOAD_SOURCE = 124 |
| CMD_ADD_DJANGO_EXCEPTION_BREAK = 125 |
| CMD_REMOVE_DJANGO_EXCEPTION_BREAK = 126 |
| CMD_SET_NEXT_STATEMENT = 127 |
| CMD_SMART_STEP_INTO = 128 |
| CMD_EXIT = 129 |
| CMD_SIGNATURE_CALL_TRACE = 130 |
| CMD_VERSION = 501 |
| CMD_RETURN = 502 |
| CMD_ERROR = 901 |
| |
| ID_TO_MEANING = { |
| '101':'CMD_RUN', |
| '102':'CMD_LIST_THREADS', |
| '103':'CMD_THREAD_CREATE', |
| '104':'CMD_THREAD_KILL', |
| '105':'CMD_THREAD_SUSPEND', |
| '106':'CMD_THREAD_RUN', |
| '107':'CMD_STEP_INTO', |
| '108':'CMD_STEP_OVER', |
| '109':'CMD_STEP_RETURN', |
| '110':'CMD_GET_VARIABLE', |
| '111':'CMD_SET_BREAK', |
| '112':'CMD_REMOVE_BREAK', |
| '113':'CMD_EVALUATE_EXPRESSION', |
| '114':'CMD_GET_FRAME', |
| '115':'CMD_EXEC_EXPRESSION', |
| '116':'CMD_WRITE_TO_CONSOLE', |
| '117':'CMD_CHANGE_VARIABLE', |
| '118':'CMD_RUN_TO_LINE', |
| '119':'CMD_RELOAD_CODE', |
| '120':'CMD_GET_COMPLETIONS', |
| '121':'CMD_CONSOLE_EXEC', |
| '122':'CMD_ADD_EXCEPTION_BREAK', |
| '123':'CMD_REMOVE_EXCEPTION_BREAK', |
| '124':'CMD_LOAD_SOURCE', |
| '125':'CMD_ADD_DJANGO_EXCEPTION_BREAK', |
| '126':'CMD_REMOVE_DJANGO_EXCEPTION_BREAK', |
| '127':'CMD_SET_NEXT_STATEMENT', |
| '128':'CMD_SMART_STEP_INTO', |
| '129': 'CMD_EXIT', |
| '130': 'CMD_SIGNATURE_CALL_TRACE', |
| '501':'CMD_VERSION', |
| '502':'CMD_RETURN', |
| '901':'CMD_ERROR', |
| } |
| |
| MAX_IO_MSG_SIZE = 1000 #if the io is too big, we'll not send all (could make the debugger too non-responsive) |
| #this number can be changed if there's need to do so |
| |
| VERSION_STRING = "@@BUILD_NUMBER@@" |
| |
| |
| #--------------------------------------------------------------------------------------------------- UTILITIES |
| |
| #======================================================================================================================= |
| # PydevdLog |
| #======================================================================================================================= |
| def PydevdLog(level, *args): |
| """ levels are: |
| 0 most serious warnings/errors |
| 1 warnings/significant events |
| 2 informational trace |
| """ |
| if level <= DebugInfoHolder.DEBUG_TRACE_LEVEL: |
| #yes, we can have errors printing if the console of the program has been finished (and we're still trying to print something) |
| try: |
| sys.stderr.write('%s\n' % (args,)) |
| except: |
| pass |
| |
| #======================================================================================================================= |
| # GlobalDebuggerHolder |
| #======================================================================================================================= |
| class GlobalDebuggerHolder: |
| ''' |
| Holder for the global debugger. |
| ''' |
| globalDbg = None |
| |
| #======================================================================================================================= |
| # GetGlobalDebugger |
| #======================================================================================================================= |
| def GetGlobalDebugger(): |
| return GlobalDebuggerHolder.globalDbg |
| |
| #======================================================================================================================= |
| # SetGlobalDebugger |
| #======================================================================================================================= |
| def SetGlobalDebugger(dbg): |
| GlobalDebuggerHolder.globalDbg = dbg |
| |
| |
| #------------------------------------------------------------------- ACTUAL COMM |
| |
| #======================================================================================================================= |
| # PyDBDaemonThread |
| #======================================================================================================================= |
| class PyDBDaemonThread(threading.Thread): |
| |
| def __init__(self): |
| threading.Thread.__init__(self) |
| self.setDaemon(True) |
| self.killReceived = False |
| self.dontTraceMe = True |
| |
| def run(self): |
| if sys.platform.startswith("java"): |
| import org.python.core as PyCore #@UnresolvedImport |
| ss = PyCore.PySystemState() |
| # Note: Py.setSystemState() affects only the current thread. |
| PyCore.Py.setSystemState(ss) |
| |
| self.OnRun() |
| |
| def OnRun(self): |
| raise NotImplementedError('Should be reimplemented by: %s' % self.__class__) |
| |
| def doKillPydevThread(self): |
| #that was not working very well because jython gave some socket errors |
| self.killReceived = True |
| |
| def stop(self): |
| _Thread_stop(self) |
| |
| def stopTrace(self): |
| if self.dontTraceMe: |
| pydevd_tracing.SetTrace(None) # no debugging on this thread |
| |
| |
| #======================================================================================================================= |
| # ReaderThread |
| #======================================================================================================================= |
| class ReaderThread(PyDBDaemonThread): |
| """ reader thread reads and dispatches commands in an infinite loop """ |
| |
| def __init__(self, sock): |
| PyDBDaemonThread.__init__(self) |
| self.sock = sock |
| self.setName("pydevd.Reader") |
| |
| |
| def doKillPydevThread(self): |
| #We must close the socket so that it doesn't stay halted there. |
| self.killReceived = True |
| try: |
| self.sock.shutdown(SHUT_RD) #shotdown the socket for read |
| except: |
| #just ignore that |
| pass |
| |
| def OnRun(self): |
| self.stopTrace() |
| buffer = "" |
| try: |
| |
| while not self.killReceived: |
| try: |
| r = self.sock.recv(1024) |
| except: |
| if not self.killReceived: |
| self.handleExcept() |
| return #Finished communication. |
| if IS_PY3K: |
| r = r.decode('utf-8') |
| |
| buffer += r |
| if DebugInfoHolder.DEBUG_RECORD_SOCKET_READS: |
| pydev_log.debug('received >>%s<<\n' % (buffer,)) |
| |
| if len(buffer) == 0: |
| self.handleExcept() |
| break |
| while buffer.find('\n') != -1: |
| command, buffer = buffer.split('\n', 1) |
| pydev_log.debug('Received command: >>%s<<\n' % (command,)) |
| args = command.split('\t', 2) |
| try: |
| self.processCommand(int(args[0]), int(args[1]), args[2]) |
| except: |
| traceback.print_exc() |
| sys.stderr.write("Can't process net command: %s\n" % command) |
| sys.stderr.flush() |
| |
| except: |
| traceback.print_exc() |
| self.handleExcept() |
| |
| |
| def handleExcept(self): |
| GlobalDebuggerHolder.globalDbg.FinishDebuggingSession() |
| |
| def processCommand(self, cmd_id, seq, text): |
| GlobalDebuggerHolder.globalDbg.processNetCommand(cmd_id, seq, text) |
| |
| |
| #----------------------------------------------------------------------------------- SOCKET UTILITIES - WRITER |
| #======================================================================================================================= |
| # WriterThread |
| #======================================================================================================================= |
| class WriterThread(PyDBDaemonThread): |
| """ writer thread writes out the commands in an infinite loop """ |
| def __init__(self, sock): |
| PyDBDaemonThread.__init__(self) |
| self.setDaemon(False) #writer isn't daemon to be able to deliver all messages after main thread terminated |
| self.sock = sock |
| self.setName("pydevd.Writer") |
| self.cmdQueue = _queue.Queue() |
| if pydevd_vm_type.GetVmType() == 'python': |
| self.timeout = 0 |
| else: |
| self.timeout = 0.1 |
| |
| def addCommand(self, cmd): |
| """ cmd is NetCommand """ |
| if not self.killReceived: #we don't take new data after everybody die |
| self.cmdQueue.put(cmd) |
| |
| def OnRun(self): |
| """ just loop and write responses """ |
| |
| self.stopTrace() |
| try: |
| while True: |
| try: |
| try: |
| cmd = self.cmdQueue.get(1, 0.1) |
| except _queue.Empty: |
| if self.killReceived: |
| try: |
| self.sock.shutdown(SHUT_WR) |
| self.sock.close() |
| except: |
| pass |
| self.stop() #mark thread as stopped to unblock joined threads for sure (they can hang otherwise) |
| |
| return #break if queue is empty and killReceived |
| else: |
| continue |
| except: |
| #PydevdLog(0, 'Finishing debug communication...(1)') |
| #when liberating the thread here, we could have errors because we were shutting down |
| #but the thread was still not liberated |
| return |
| out = cmd.getOutgoing() |
| |
| if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 1: |
| out_message = 'sending cmd: ' |
| out_message += ID_TO_MEANING.get(out[:3], 'UNKNOWN') |
| out_message += ' ' |
| out_message += out |
| try: |
| sys.stderr.write('%s\n' % (out_message,)) |
| except: |
| pass |
| |
| if IS_PY3K: |
| out = bytearray(out, 'utf-8') |
| self.sock.send(out) #TODO: this does not guarantee that all message are sent (and jython does not have a send all) |
| if cmd.id == CMD_EXIT: |
| break |
| if time is None: |
| break #interpreter shutdown |
| time.sleep(self.timeout) |
| except Exception: |
| GlobalDebuggerHolder.globalDbg.FinishDebuggingSession() |
| if DebugInfoHolder.DEBUG_TRACE_LEVEL >= 0: |
| traceback.print_exc() |
| |
| |
| |
| |
| #--------------------------------------------------- CREATING THE SOCKET THREADS |
| |
| #======================================================================================================================= |
| # StartServer |
| #======================================================================================================================= |
| def StartServer(port): |
| """ binds to a port, waits for the debugger to connect """ |
| s = socket(AF_INET, SOCK_STREAM) |
| s.bind(('', port)) |
| s.listen(1) |
| newSock, _addr = s.accept() |
| return newSock |
| |
| #======================================================================================================================= |
| # StartClient |
| #======================================================================================================================= |
| def StartClient(host, port): |
| """ connects to a host/port """ |
| PydevdLog(1, "Connecting to ", host, ":", str(port)) |
| |
| s = socket(AF_INET, SOCK_STREAM) |
| |
| MAX_TRIES = 3 |
| i = 0 |
| while i<MAX_TRIES: |
| try: |
| s.connect((host, port)) |
| except: |
| i+=1 |
| time.sleep(0.2) |
| continue |
| PydevdLog(1, "Connected.") |
| return s |
| |
| sys.stderr.write("Could not connect to %s: %s\n" % (host, port)) |
| sys.stderr.flush() |
| traceback.print_exc() |
| sys.exit(1) #TODO: is it safe? |
| |
| |
| |
| #------------------------------------------------------------------------------------ MANY COMMUNICATION STUFF |
| |
| #======================================================================================================================= |
| # NetCommand |
| #======================================================================================================================= |
| class NetCommand: |
| """ Commands received/sent over the network. |
| |
| Command can represent command received from the debugger, |
| or one to be sent by daemon. |
| """ |
| next_seq = 0 # sequence numbers |
| |
| def __init__(self, id, seq, text): |
| """ smart handling of paramaters |
| if sequence is 0, new sequence will be generated |
| if text has carriage returns they'll be replaced""" |
| self.id = id |
| if (seq == 0): seq = self.getNextSeq() |
| self.seq = seq |
| self.text = text |
| self.outgoing = self.makeMessage(id, seq, text) |
| |
| def getNextSeq(self): |
| """ returns next sequence number """ |
| NetCommand.next_seq += 2 |
| return NetCommand.next_seq |
| |
| def getOutgoing(self): |
| """ returns the outgoing message""" |
| return self.outgoing |
| |
| def makeMessage(self, cmd, seq, payload): |
| encoded = quote(to_string(payload), '/<>_=" \t') |
| return str(cmd) + '\t' + str(seq) + '\t' + encoded + "\n" |
| |
| #======================================================================================================================= |
| # NetCommandFactory |
| #======================================================================================================================= |
| class NetCommandFactory: |
| |
| def __init_(self): |
| self.next_seq = 0 |
| |
| def threadToXML(self, thread): |
| """ thread information as XML """ |
| name = pydevd_vars.makeValidXmlValue(thread.getName()) |
| cmdText = '<thread name="%s" id="%s" />' % (quote(name), GetThreadId(thread)) |
| return cmdText |
| |
| def makeErrorMessage(self, seq, text): |
| cmd = NetCommand(CMD_ERROR, seq, text) |
| if DebugInfoHolder.DEBUG_TRACE_LEVEL > 2: |
| sys.stderr.write("Error: %s" % (text,)) |
| return cmd |
| |
| def makeThreadCreatedMessage(self, thread): |
| cmdText = "<xml>" + self.threadToXML(thread) + "</xml>" |
| return NetCommand(CMD_THREAD_CREATE, 0, cmdText) |
| |
| def makeListThreadsMessage(self, seq): |
| """ returns thread listing as XML """ |
| try: |
| t = threading.enumerate() |
| cmdText = "<xml>" |
| for i in t: |
| if t.isAlive(): |
| cmdText += self.threadToXML(i) |
| cmdText += "</xml>" |
| return NetCommand(CMD_RETURN, seq, cmdText) |
| except: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| def makeVariableChangedMessage(self, seq, payload): |
| # notify debugger that value was changed successfully |
| return NetCommand(CMD_RETURN, seq, payload) |
| |
| def makeIoMessage(self, v, ctx, dbg=None): |
| ''' |
| @param v: the message to pass to the debug server |
| @param ctx: 1 for stdio 2 for stderr |
| @param dbg: If not none, add to the writer |
| ''' |
| |
| try: |
| if len(v) > MAX_IO_MSG_SIZE: |
| v = v[0:MAX_IO_MSG_SIZE] |
| v += '...' |
| |
| v = pydevd_vars.makeValidXmlValue(quote(v, '/>_= \t')) |
| net = NetCommand(str(CMD_WRITE_TO_CONSOLE), 0, '<xml><io s="%s" ctx="%s"/></xml>' % (v, ctx)) |
| except: |
| net = self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| if dbg: |
| dbg.writer.addCommand(net) |
| |
| return net |
| |
| def makeVersionMessage(self, seq): |
| try: |
| return NetCommand(CMD_VERSION, seq, VERSION_STRING) |
| except: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| def makeThreadKilledMessage(self, id): |
| try: |
| return NetCommand(CMD_THREAD_KILL, 0, str(id)) |
| except: |
| return self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| def makeThreadSuspendMessage(self, thread_id, frame, stop_reason, message): |
| |
| """ <xml> |
| <thread id="id" stop_reason="reason"> |
| <frame id="id" name="functionName " file="file" line="line"> |
| <var variable stuffff.... |
| </frame> |
| </thread> |
| """ |
| try: |
| cmdTextList = ["<xml>"] |
| |
| if message: |
| message = pydevd_vars.makeValidXmlValue(str(message)) |
| |
| cmdTextList.append('<thread id="%s" stop_reason="%s" message="%s">' % (thread_id, stop_reason, message)) |
| |
| curFrame = frame |
| try: |
| while curFrame: |
| #print cmdText |
| myId = str(id(curFrame)) |
| #print "id is ", myId |
| |
| if curFrame.f_code is None: |
| break #Iron Python sometimes does not have it! |
| |
| myName = curFrame.f_code.co_name #method name (if in method) or ? if global |
| if myName is None: |
| break #Iron Python sometimes does not have it! |
| |
| #print "name is ", myName |
| |
| filename, base = pydevd_file_utils.GetFilenameAndBase(curFrame) |
| |
| myFile = pydevd_file_utils.NormFileToClient(filename) |
| |
| #print "file is ", myFile |
| #myFile = inspect.getsourcefile(curFrame) or inspect.getfile(frame) |
| |
| myLine = str(curFrame.f_lineno) |
| #print "line is ", myLine |
| |
| #the variables are all gotten 'on-demand' |
| #variables = pydevd_vars.frameVarsToXML(curFrame.f_locals) |
| |
| variables = '' |
| cmdTextList.append('<frame id="%s" name="%s" ' % (myId , pydevd_vars.makeValidXmlValue(myName))) |
| cmdTextList.append('file="%s" line="%s">"' % (quote(myFile, '/>_= \t'), myLine)) |
| cmdTextList.append(variables) |
| cmdTextList.append("</frame>") |
| curFrame = curFrame.f_back |
| except : |
| traceback.print_exc() |
| |
| cmdTextList.append("</thread></xml>") |
| cmdText = ''.join(cmdTextList) |
| return NetCommand(CMD_THREAD_SUSPEND, 0, cmdText) |
| except: |
| return self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| def makeThreadRunMessage(self, id, reason): |
| try: |
| return NetCommand(CMD_THREAD_RUN, 0, str(id) + "\t" + str(reason)) |
| except: |
| return self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| def makeGetVariableMessage(self, seq, payload): |
| try: |
| return NetCommand(CMD_GET_VARIABLE, seq, payload) |
| except Exception: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| def makeGetFrameMessage(self, seq, payload): |
| try: |
| return NetCommand(CMD_GET_FRAME, seq, payload) |
| except Exception: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| |
| def makeEvaluateExpressionMessage(self, seq, payload): |
| try: |
| return NetCommand(CMD_EVALUATE_EXPRESSION, seq, payload) |
| except Exception: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| def makeGetCompletionsMessage(self, seq, payload): |
| try: |
| return NetCommand(CMD_GET_COMPLETIONS, seq, payload) |
| except Exception: |
| return self.makeErrorMessage(seq, GetExceptionTracebackStr()) |
| |
| def makeLoadSourceMessage(self, seq, source, dbg=None): |
| try: |
| net = NetCommand(CMD_LOAD_SOURCE, seq, '%s' % source) |
| |
| except: |
| net = self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| if dbg: |
| dbg.writer.addCommand(net) |
| return net |
| |
| def makeExitMessage(self): |
| try: |
| net = NetCommand(CMD_EXIT, 0, '') |
| |
| except: |
| net = self.makeErrorMessage(0, GetExceptionTracebackStr()) |
| |
| return net |
| |
| INTERNAL_TERMINATE_THREAD = 1 |
| INTERNAL_SUSPEND_THREAD = 2 |
| |
| |
| #======================================================================================================================= |
| # InternalThreadCommand |
| #======================================================================================================================= |
| class InternalThreadCommand: |
| """ internal commands are generated/executed by the debugger. |
| |
| The reason for their existence is that some commands have to be executed |
| on specific threads. These are the InternalThreadCommands that get |
| get posted to PyDB.cmdQueue. |
| """ |
| |
| def canBeExecutedBy(self, thread_id): |
| '''By default, it must be in the same thread to be executed |
| ''' |
| return self.thread_id == thread_id |
| |
| def doIt(self, dbg): |
| raise NotImplementedError("you have to override doIt") |
| |
| #======================================================================================================================= |
| # InternalTerminateThread |
| #======================================================================================================================= |
| class InternalTerminateThread(InternalThreadCommand): |
| def __init__(self, thread_id): |
| self.thread_id = thread_id |
| |
| def doIt(self, dbg): |
| PydevdLog(1, "killing ", str(self.thread_id)) |
| cmd = dbg.cmdFactory.makeThreadKilledMessage(self.thread_id) |
| dbg.writer.addCommand(cmd) |
| |
| |
| #======================================================================================================================= |
| # InternalRunThread |
| #======================================================================================================================= |
| class InternalRunThread(InternalThreadCommand): |
| def __init__(self, thread_id): |
| self.thread_id = thread_id |
| |
| def doIt(self, dbg): |
| t = PydevdFindThreadById(self.thread_id) |
| if t: |
| t.additionalInfo.pydev_step_cmd = None |
| t.additionalInfo.pydev_step_stop = None |
| t.additionalInfo.pydev_state = STATE_RUN |
| |
| |
| #======================================================================================================================= |
| # InternalStepThread |
| #======================================================================================================================= |
| class InternalStepThread(InternalThreadCommand): |
| def __init__(self, thread_id, cmd_id): |
| self.thread_id = thread_id |
| self.cmd_id = cmd_id |
| |
| def doIt(self, dbg): |
| t = PydevdFindThreadById(self.thread_id) |
| if t: |
| t.additionalInfo.pydev_step_cmd = self.cmd_id |
| t.additionalInfo.pydev_state = STATE_RUN |
| |
| #======================================================================================================================= |
| # InternalSetNextStatementThread |
| #======================================================================================================================= |
| class InternalSetNextStatementThread(InternalThreadCommand): |
| def __init__(self, thread_id, cmd_id, line, func_name): |
| self.thread_id = thread_id |
| self.cmd_id = cmd_id |
| self.line = line |
| self.func_name = func_name |
| |
| def doIt(self, dbg): |
| t = PydevdFindThreadById(self.thread_id) |
| if t: |
| t.additionalInfo.pydev_step_cmd = self.cmd_id |
| t.additionalInfo.pydev_next_line = int(self.line) |
| t.additionalInfo.pydev_func_name = self.func_name |
| t.additionalInfo.pydev_state = STATE_RUN |
| |
| |
| #======================================================================================================================= |
| # InternalGetVariable |
| #======================================================================================================================= |
| class InternalGetVariable(InternalThreadCommand): |
| """ gets the value of a variable """ |
| def __init__(self, seq, thread_id, frame_id, scope, attrs): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| self.scope = scope |
| self.attributes = attrs |
| |
| def doIt(self, dbg): |
| """ Converts request into python variable """ |
| try: |
| xml = "<xml>" |
| valDict = pydevd_vars.resolveCompoundVariable(self.thread_id, self.frame_id, self.scope, self.attributes) |
| if valDict is None: |
| valDict = {} |
| |
| keys = valDict.keys() |
| if hasattr(keys, 'sort'): |
| keys.sort(compare_object_attrs) #Python 3.0 does not have it |
| else: |
| if IS_PY3K: |
| keys = sorted(keys, key=cmp_to_key(compare_object_attrs)) #Jython 2.1 does not have it (and all must be compared as strings). |
| else: |
| keys = sorted(keys, cmp=compare_object_attrs) #Jython 2.1 does not have it (and all must be compared as strings). |
| |
| for k in keys: |
| xml += pydevd_vars.varToXML(valDict[k], to_string(k)) |
| |
| xml += "</xml>" |
| cmd = dbg.cmdFactory.makeGetVariableMessage(self.sequence, xml) |
| dbg.writer.addCommand(cmd) |
| except Exception: |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error resolving variables " + GetExceptionTracebackStr()) |
| dbg.writer.addCommand(cmd) |
| |
| |
| #======================================================================================================================= |
| # InternalChangeVariable |
| #======================================================================================================================= |
| class InternalChangeVariable(InternalThreadCommand): |
| """ changes the value of a variable """ |
| def __init__(self, seq, thread_id, frame_id, scope, attr, expression): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| self.scope = scope |
| self.attr = attr |
| self.expression = expression |
| |
| def doIt(self, dbg): |
| """ Converts request into python variable """ |
| try: |
| result = pydevd_vars.changeAttrExpression(self.thread_id, self.frame_id, self.attr, self.expression) |
| xml = "<xml>" |
| xml += pydevd_vars.varToXML(result, "") |
| xml += "</xml>" |
| cmd = dbg.cmdFactory.makeVariableChangedMessage(self.sequence, xml) |
| dbg.writer.addCommand(cmd) |
| except Exception: |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error changing variable attr:%s expression:%s traceback:%s" % (self.attr, self.expression, GetExceptionTracebackStr())) |
| dbg.writer.addCommand(cmd) |
| |
| |
| #======================================================================================================================= |
| # InternalGetFrame |
| #======================================================================================================================= |
| class InternalGetFrame(InternalThreadCommand): |
| """ gets the value of a variable """ |
| def __init__(self, seq, thread_id, frame_id): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| |
| def doIt(self, dbg): |
| """ Converts request into python variable """ |
| try: |
| frame = pydevd_vars.findFrame(self.thread_id, self.frame_id) |
| if frame is not None: |
| xml = "<xml>" |
| xml += pydevd_vars.frameVarsToXML(frame.f_locals) |
| del frame |
| xml += "</xml>" |
| cmd = dbg.cmdFactory.makeGetFrameMessage(self.sequence, xml) |
| dbg.writer.addCommand(cmd) |
| else: |
| #pydevd_vars.dumpFrames(self.thread_id) |
| #don't print this error: frame not found: means that the client is not synchronized (but that's ok) |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Frame not found: %s from thread: %s" % (self.frame_id, self.thread_id)) |
| dbg.writer.addCommand(cmd) |
| except: |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error resolving frame: %s from thread: %s" % (self.frame_id, self.thread_id)) |
| dbg.writer.addCommand(cmd) |
| |
| |
| #======================================================================================================================= |
| # InternalEvaluateExpression |
| #======================================================================================================================= |
| class InternalEvaluateExpression(InternalThreadCommand): |
| """ gets the value of a variable """ |
| |
| def __init__(self, seq, thread_id, frame_id, expression, doExec, doTrim): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| self.expression = expression |
| self.doExec = doExec |
| self.doTrim = doTrim |
| |
| def doIt(self, dbg): |
| """ Converts request into python variable """ |
| try: |
| result = pydevd_vars.evaluateExpression(self.thread_id, self.frame_id, self.expression, self.doExec) |
| xml = "<xml>" |
| xml += pydevd_vars.varToXML(result, "", self.doTrim) |
| xml += "</xml>" |
| cmd = dbg.cmdFactory.makeEvaluateExpressionMessage(self.sequence, xml) |
| dbg.writer.addCommand(cmd) |
| except: |
| exc = GetExceptionTracebackStr() |
| sys.stderr.write('%s\n' % (exc,)) |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error evaluating expression " + exc) |
| dbg.writer.addCommand(cmd) |
| |
| #======================================================================================================================= |
| # InternalConsoleExec |
| #======================================================================================================================= |
| class InternalConsoleExec(InternalThreadCommand): |
| """ gets the value of a variable """ |
| |
| def __init__(self, seq, thread_id, frame_id, expression): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| self.expression = expression |
| |
| def doIt(self, dbg): |
| """ Converts request into python variable """ |
| pydev_start_new_thread = None |
| try: |
| try: |
| pydev_start_new_thread = thread.start_new_thread |
| |
| thread.start_new_thread = thread._original_start_new_thread #don't trace new threads created by console command |
| thread.start_new = thread._original_start_new_thread |
| |
| result = pydevconsole.consoleExec(self.thread_id, self.frame_id, self.expression) |
| xml = "<xml>" |
| xml += pydevd_vars.varToXML(result, "") |
| xml += "</xml>" |
| cmd = dbg.cmdFactory.makeEvaluateExpressionMessage(self.sequence, xml) |
| dbg.writer.addCommand(cmd) |
| except: |
| exc = GetExceptionTracebackStr() |
| sys.stderr.write('%s\n' % (exc,)) |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error evaluating console expression " + exc) |
| dbg.writer.addCommand(cmd) |
| finally: |
| thread.start_new_thread = pydev_start_new_thread |
| thread.start_new = pydev_start_new_thread |
| sys.stderr.flush() |
| sys.stdout.flush() |
| |
| #======================================================================================================================= |
| # InternalGetCompletions |
| #======================================================================================================================= |
| class InternalGetCompletions(InternalThreadCommand): |
| """ Gets the completions in a given scope """ |
| |
| def __init__(self, seq, thread_id, frame_id, act_tok): |
| self.sequence = seq |
| self.thread_id = thread_id |
| self.frame_id = frame_id |
| self.act_tok = act_tok |
| |
| |
| def doIt(self, dbg): |
| """ Converts request into completions """ |
| try: |
| remove_path = None |
| try: |
| import _completer |
| except: |
| try: |
| path = os.environ['PYDEV_COMPLETER_PYTHONPATH'] |
| except : |
| path = os.path.dirname(__file__) |
| sys.path.append(path) |
| remove_path = path |
| try: |
| import _completer |
| except : |
| pass |
| |
| try: |
| |
| frame = pydevd_vars.findFrame(self.thread_id, self.frame_id) |
| if frame is not None: |
| |
| #Not using frame.f_globals because of https://sourceforge.net/tracker2/?func=detail&aid=2541355&group_id=85796&atid=577329 |
| #(Names not resolved in generator expression in method) |
| #See message: http://mail.python.org/pipermail/python-list/2009-January/526522.html |
| updated_globals = {} |
| updated_globals.update(frame.f_globals) |
| updated_globals.update(frame.f_locals) #locals later because it has precedence over the actual globals |
| locals = frame.f_locals |
| else: |
| updated_globals = {} |
| locals = {} |
| |
| |
| if pydevconsole.IPYTHON: |
| completions = pydevconsole.get_completions(self.act_tok, self.act_tok, updated_globals, locals) |
| else: |
| try: |
| completer = _completer.Completer(updated_globals, None) |
| #list(tuple(name, descr, parameters, type)) |
| completions = completer.complete(self.act_tok) |
| except : |
| completions = [] |
| |
| |
| def makeValid(s): |
| return pydevd_vars.makeValidXmlValue(pydevd_vars.quote(s, '/>_= \t')) |
| |
| msg = "<xml>" |
| |
| for comp in completions: |
| msg += '<comp p0="%s" p1="%s" p2="%s" p3="%s"/>' % (makeValid(comp[0]), makeValid(comp[1]), makeValid(comp[2]), makeValid(comp[3]),) |
| msg += "</xml>" |
| |
| cmd = dbg.cmdFactory.makeGetCompletionsMessage(self.sequence, msg) |
| dbg.writer.addCommand(cmd) |
| |
| finally: |
| if remove_path is not None: |
| sys.path.remove(remove_path) |
| |
| except: |
| exc = GetExceptionTracebackStr() |
| sys.stderr.write('%s\n' % (exc,)) |
| cmd = dbg.cmdFactory.makeErrorMessage(self.sequence, "Error getting completion " + exc) |
| dbg.writer.addCommand(cmd) |
| |
| |
| #======================================================================================================================= |
| # PydevdFindThreadById |
| #======================================================================================================================= |
| def PydevdFindThreadById(thread_id): |
| try: |
| # there was a deadlock here when I did not remove the tracing function when thread was dead |
| threads = threading.enumerate() |
| for i in threads: |
| if thread_id == GetThreadId(i): |
| return i |
| |
| sys.stderr.write("Could not find thread %s\n" % thread_id) |
| sys.stderr.write("Available: %s\n" % [GetThreadId(t) for t in threads]) |
| sys.stderr.flush() |
| except: |
| traceback.print_exc() |
| |
| return None |
| |
