binutils-2.27/include/opcode/m88k.h - toolchain/binutils - Git at Google

 /* Table of opcodes for the Motorola M88k family.
    Copyright (C) 1989-2016 Free Software Foundation, Inc.

    This file is part of GDB and GAS.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
    MA 02110-1301, USA.  */

 /*
  *			Disassembler Instruction Table
  *
  *	The first field of the table is the opcode field. If an opcode
  *	is specified which has any non-opcode bits on, a system error
  *	will occur when the system attempts the install it into the
  *	instruction table.  The second parameter is a pointer to the
  *	instruction mnemonic. Each operand is specified by offset, width,
  *	and type. The offset is the bit number of the least significant
  *	bit of the operand with bit 0 being the least significant bit of
  *	the instruction. The width is the number of bits used to specify
  *	the operand. The type specifies the output format to be used for
  *	the operand. The valid formats are: register, register indirect,
  *	hex constant, and bit field specification.  The last field is a
  *	pointer to the next instruction in the linked list.  These pointers
  *	are initialized by init_disasm().
  *
  *				Revision History
  *
  *	Revision 1.0	11/08/85	Creation date
  *		 1.1	02/05/86	Updated instruction mnemonic table MD
  *		 1.2	06/16/86	Updated SIM_FLAGS for floating point
  *		 1.3	09/20/86	Updated for new encoding
  *		 	05/11/89	R. Trawick adapted from Motorola disassembler
  */

 #include <stdio.h>

 /* Define the number of bits in the primary opcode field of the instruction,
    the destination field, the source 1 and source 2 fields.  */

 /* Size of opcode field.  */
 #define OP 8

 /* Size of destination.  */
 #define DEST 6

 /* Size of source1.  */
 #define SOURCE1 6

 /* Size of source2.  */
 #define SOURCE2 6

 /* Number of registers.  */
 #define REGs 32

 /* Type definitions.  */

 typedef unsigned int UINT;
 #define    WORD    long
 #define    FLAG    unsigned
 #define    STATE   short

 /* The next four equates define the priorities that the various classes
  * of instructions have regarding writing results back into registers and
  * signalling exceptions.  */

 /* PMEM is also defined in <sys/param.h> on Delta 88's.  Sigh!  */
 #undef PMEM

 /* Integer priority.  */
 #define    PINT  0

 /* Floating point priority.  */
 #define    PFLT  1

 /* Memory priority.  */
 #define    PMEM  2

 /* Not applicable, instruction doesn't write to regs.  */
 #define    NA    3

 /* Highest of these priorities.  */
 #define    HIPRI 3

 /* The instruction registers are an artificial mechanism to speed up
  * simulator execution.  In the real processor, an instruction register
  * is 32 bits wide.  In the simulator, the 32 bit instruction is kept in
  * a structure field called rawop, and the instruction is partially decoded,
  * and split into various fields and flags which make up the other fields
  * of the structure.
  * The partial decode is done when the instructions are initially loaded
  * into simulator memory.  The simulator code memory is not an array of
  * 32 bit words, but is an array of instruction register structures.
  * Yes this wastes memory, but it executes much quicker.
  */

 struct IR_FIELDS
 {
   unsigned op:OP,
     dest: DEST,
     src1: SOURCE1,
     src2: SOURCE2;
   int ltncy,
     extime,
     /* Writeback priority.  */
     wb_pri;
   /* Immediate size.  */
   unsigned        imm_flags:2,
     /* Register source 1 used.  */
     rs1_used:1,
     /* Register source 2 used. */
     rs2_used:1,
     /* Register source/dest. used.  */
     rsd_used:1,
     /* Complement.  */
     c_flag:1,
     /* Upper half word.  */
     u_flag:1,
     /* Execute next.  */
     n_flag:1,
     /* Uses writeback slot.  */
     wb_flag:1,
     /* Dest size.  */
     dest_64:1,
     /* Source 1 size.  */
     s1_64:1,
     /* Source 2 size.  */
     s2_64:1,
     scale_flag:1,
     /* Scaled register.  */
     brk_flg:1;
 };

 struct	mem_segs
 {
   /* Pointer (returned by calloc) to segment.  */
   struct mem_wrd *seg;

   /* Base load address from file headers.  */
   unsigned long baseaddr;

   /* Ending address of segment.  */
   unsigned long endaddr;

   /* Segment control flags (none defined).  */
   int	      flags;
 };

 #define	MAXSEGS		(10)			/* max number of segment allowed */
 #define	MEMSEGSIZE	(sizeof(struct mem_segs))/* size of mem_segs structure */

 #if 0
 #define BRK_RD		(0x01)			/* break on memory read */
 #define BRK_WR		(0x02)			/* break on memory write */
 #define BRK_EXEC	(0x04)			/* break on execution */
 #define	BRK_CNT		(0x08)			/* break on terminal count */
 #endif

 struct mem_wrd
 {
   /* Simulator instruction break down.  */
   struct IR_FIELDS opcode;
   union {
     /* Memory element break down.  */
     unsigned long  l;
     unsigned short s[2];
     unsigned char  c[4];
   } mem;
 };

 /* Size of each 32 bit memory model.  */
 #define	MEMWRDSIZE	(sizeof (struct mem_wrd))

 extern struct mem_segs memory[];
 extern struct PROCESSOR m78000;

 struct PROCESSOR
 {
   unsigned WORD
   /* Execute instruction pointer.  */
   ip,
     /* Vector base register.  */
     vbr,
     /* Processor status register.  */
     psr;

   /* Source 1.  */
   WORD    S1bus,
     /* Source 2.  */
     S2bus,
     /* Destination.  */
     Dbus,
     /* Data address bus.  */
     DAbus,
     ALU,
     /* Data registers.  */
     Regs[REGs],
     /* Max clocks before reg is available.  */
     time_left[REGs],
     /* Writeback priority of reg.  */
     wb_pri[REGs],
     /* Integer unit control regs.  */
     SFU0_regs[REGs],
     /* Floating point control regs.  */
     SFU1_regs[REGs],
     Scoreboard[REGs],
     Vbr;
   unsigned WORD   scoreboard,
     Psw,
     Tpsw;
   /* Waiting for a jump instruction.  */
   FLAG   jump_pending:1;
 };

 /* Size of immediate field.  */

 #define    i26bit      1
 #define    i16bit      2
 #define    i10bit      3

 /* Definitions for fields in psr.  */

 #define psr_mode  31
 #define psr_rbo   30
 #define psr_ser   29
 #define psr_carry 28
 #define psr_sf7m  11
 #define psr_sf6m  10
 #define psr_sf5m   9
 #define psr_sf4m   8
 #define psr_sf3m   7
 #define psr_sf2m   6
 #define psr_sf1m   5
 #define psr_mam    4
 #define psr_inm    3
 #define psr_exm    2
 #define psr_trm    1
 #define psr_ovfm   0

 /* The 1 clock operations.  */

 #define    ADDU        1
 #define    ADDC        2
 #define    ADDUC       3
 #define    ADD         4

 #define    SUBU    ADD+1
 #define    SUBB    ADD+2
 #define    SUBUB   ADD+3
 #define    SUB     ADD+4

 #define    AND_    ADD+5
 #define    OR      ADD+6
 #define    XOR     ADD+7
 #define    CMP     ADD+8

 /* Loads.  */

 #define    LDAB    CMP+1
 #define    LDAH    CMP+2
 #define    LDA     CMP+3
 #define    LDAD    CMP+4

 #define    LDB   LDAD+1
 #define    LDH   LDAD+2
 #define    LD    LDAD+3
 #define    LDD   LDAD+4
 #define    LDBU  LDAD+5
 #define    LDHU  LDAD+6

 /* Stores.  */

 #define    STB    LDHU+1
 #define    STH    LDHU+2
 #define    ST     LDHU+3
 #define    STD    LDHU+4

 /* Exchange.  */

 #define    XMEMBU LDHU+5
 #define    XMEM   LDHU+6

 /* Branches.  */

 #define    JSR    STD+1
 #define    BSR    STD+2
 #define    BR     STD+3
 #define    JMP    STD+4
 #define    BB1    STD+5
 #define    BB0    STD+6
 #define    RTN    STD+7
 #define    BCND   STD+8

 /* Traps.  */

 #define    TB1    BCND+1
 #define    TB0    BCND+2
 #define    TCND   BCND+3
 #define    RTE    BCND+4
 #define    TBND   BCND+5

 /* Misc.  */

 #define    MUL     TBND + 1
 #define    DIV     MUL  +2
 #define    DIVU    MUL  +3
 #define    MASK    MUL  +4
 #define    FF0     MUL  +5
 #define    FF1     MUL  +6
 #define    CLR     MUL  +7
 #define    SET     MUL  +8
 #define    EXT     MUL  +9
 #define    EXTU    MUL  +10
 #define    MAK     MUL  +11
 #define    ROT     MUL  +12

 /* Control register manipulations.  */

 #define    LDCR    ROT  +1
 #define    STCR    ROT  +2
 #define    XCR     ROT  +3

 #define    FLDCR    ROT  +4
 #define    FSTCR    ROT  +5
 #define    FXCR     ROT  +6

 #define    NOP     XCR +1

 /* Floating point instructions.  */

 #define    FADD    NOP +1
 #define    FSUB    NOP +2
 #define    FMUL    NOP +3
 #define    FDIV    NOP +4
 #define    FSQRT   NOP +5
 #define    FCMP    NOP +6
 #define    FIP     NOP +7
 #define    FLT     NOP +8
 #define    INT     NOP +9
 #define    NINT    NOP +10
 #define    TRNC    NOP +11
 #define    FLDC   NOP +12
 #define    FSTC   NOP +13
 #define    FXC    NOP +14

 #define UEXT(src,off,wid) \
   ((((unsigned int)(src)) >> (off)) & ((1 << (wid)) - 1))

 #define SEXT(src,off,wid) \
   (((((int)(src))<<(32 - ((off) + (wid)))) >>(32 - (wid))) )

 #define MAKE(src,off,wid) \
   ((((unsigned int)(src)) & ((1 << (wid)) - 1)) << (off))

 #define opword(n) (unsigned long) (memaddr->mem.l)

 /* Constants and masks.  */

 #define SFU0       0x80000000
 #define SFU1       0x84000000
 #define SFU7       0x9c000000
 #define RRI10      0xf0000000
 #define RRR        0xf4000000
 #define SFUMASK    0xfc00ffe0
 #define RRRMASK    0xfc00ffe0
 #define RRI10MASK  0xfc00fc00
 #define DEFMASK    0xfc000000
 #define CTRL       0x0000f000
 #define CTRLMASK   0xfc00f800

 /* Operands types.  */

 enum operand_type
 {
   HEX = 1,
   REG = 2,
   CONT = 3,
   IND = 3,
   BF = 4,
   /* Scaled register.  */
   REGSC = 5,
   /* Control register.  */
   CRREG = 6,
   /* Floating point control register.  */
   FCRREG = 7,
   PCREL = 8,
   CONDMASK = 9,
   /* Extended register.  */
   XREG = 10,
   /* Decimal.  */
   DEC = 11
 };

 /* Hashing specification.  */

 #define HASHVAL     79

 /* Structure templates.  */

 typedef struct
 {
   unsigned int offset;
   unsigned int width;
   enum operand_type type;
 } OPSPEC;

 struct SIM_FLAGS
 {
   int  ltncy,   /* latency (max number of clocks needed to execute).  */
     extime,   /* execution time (min number of clocks needed to execute).  */
     wb_pri;   /* writeback slot priority.  */
   unsigned         op:OP,   /* simulator version of opcode.  */
     imm_flags:2,   /* 10,16 or 26 bit immediate flags.  */
     rs1_used:1,   /* register source 1 used.  */
     rs2_used:1,   /* register source 2 used.  */
     rsd_used:1,   /* register source/dest used.  */
     c_flag:1,   /* complement.  */
     u_flag:1,   /* upper half word.  */
     n_flag:1,   /* execute next.  */
     wb_flag:1,   /* uses writeback slot.  */
     dest_64:1,   /* double precision dest.  */
     s1_64:1,   /* double precision source 1.  */
     s2_64:1,   /* double precision source 2.  */
     scale_flag:1;   /* register is scaled.  */
 };

 typedef struct INSTRUCTAB {
   unsigned int  opcode;
   char          *mnemonic;
   OPSPEC        op1,op2,op3;
   struct SIM_FLAGS flgs;
 } INSTAB;


 #define NO_OPERAND {0,0,0}

 extern const INSTAB  instructions[];

 /*
  * Local Variables:
  * fill-column: 131
  * End:
  */
	/* Table of opcodes for the Motorola M88k family.
	Copyright (C) 1989-2016 Free Software Foundation, Inc.

	This file is part of GDB and GAS.

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 3 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
	MA 02110-1301, USA. */

	/*
	* Disassembler Instruction Table
	*
	* The first field of the table is the opcode field. If an opcode
	* is specified which has any non-opcode bits on, a system error
	* will occur when the system attempts the install it into the
	* instruction table. The second parameter is a pointer to the
	* instruction mnemonic. Each operand is specified by offset, width,
	* and type. The offset is the bit number of the least significant
	* bit of the operand with bit 0 being the least significant bit of
	* the instruction. The width is the number of bits used to specify
	* the operand. The type specifies the output format to be used for
	* the operand. The valid formats are: register, register indirect,
	* hex constant, and bit field specification. The last field is a
	* pointer to the next instruction in the linked list. These pointers
	* are initialized by init_disasm().
	*
	* Revision History
	*
	* Revision 1.0 11/08/85 Creation date
	* 1.1 02/05/86 Updated instruction mnemonic table MD
	* 1.2 06/16/86 Updated SIM_FLAGS for floating point
	* 1.3 09/20/86 Updated for new encoding
	* 05/11/89 R. Trawick adapted from Motorola disassembler
	*/

	#include <stdio.h>

	/* Define the number of bits in the primary opcode field of the instruction,
	the destination field, the source 1 and source 2 fields. */

	/* Size of opcode field. */
	#define OP 8

	/* Size of destination. */
	#define DEST 6

	/* Size of source1. */
	#define SOURCE1 6

	/* Size of source2. */
	#define SOURCE2 6

	/* Number of registers. */
	#define REGs 32

	/* Type definitions. */

	typedef unsigned int UINT;
	#define WORD long
	#define FLAG unsigned
	#define STATE short

	/* The next four equates define the priorities that the various classes
	* of instructions have regarding writing results back into registers and
	* signalling exceptions. */

	/* PMEM is also defined in <sys/param.h> on Delta 88's. Sigh! */
	#undef PMEM

	/* Integer priority. */
	#define PINT 0

	/* Floating point priority. */
	#define PFLT 1

	/* Memory priority. */
	#define PMEM 2

	/* Not applicable, instruction doesn't write to regs. */
	#define NA 3

	/* Highest of these priorities. */
	#define HIPRI 3

	/* The instruction registers are an artificial mechanism to speed up
	* simulator execution. In the real processor, an instruction register
	* is 32 bits wide. In the simulator, the 32 bit instruction is kept in
	* a structure field called rawop, and the instruction is partially decoded,
	* and split into various fields and flags which make up the other fields
	* of the structure.
	* The partial decode is done when the instructions are initially loaded
	* into simulator memory. The simulator code memory is not an array of
	* 32 bit words, but is an array of instruction register structures.
	* Yes this wastes memory, but it executes much quicker.
	*/

	struct IR_FIELDS
	{
	unsigned op:OP,
	dest: DEST,
	src1: SOURCE1,
	src2: SOURCE2;
	int ltncy,
	extime,
	/* Writeback priority. */
	wb_pri;
	/* Immediate size. */
	unsigned imm_flags:2,
	/* Register source 1 used. */
	rs1_used:1,
	/* Register source 2 used. */
	rs2_used:1,
	/* Register source/dest. used. */
	rsd_used:1,
	/* Complement. */
	c_flag:1,
	/* Upper half word. */
	u_flag:1,
	/* Execute next. */
	n_flag:1,
	/* Uses writeback slot. */
	wb_flag:1,
	/* Dest size. */
	dest_64:1,
	/* Source 1 size. */
	s1_64:1,
	/* Source 2 size. */
	s2_64:1,
	scale_flag:1,
	/* Scaled register. */
	brk_flg:1;
	};

	struct mem_segs
	{
	/* Pointer (returned by calloc) to segment. */
	struct mem_wrd *seg;

	/* Base load address from file headers. */
	unsigned long baseaddr;

	/* Ending address of segment. */
	unsigned long endaddr;

	/* Segment control flags (none defined). */
	int flags;
	};

	#define MAXSEGS (10) /* max number of segment allowed */
	#define MEMSEGSIZE (sizeof(struct mem_segs))/* size of mem_segs structure */

	#if 0
	#define BRK_RD (0x01) /* break on memory read */
	#define BRK_WR (0x02) /* break on memory write */
	#define BRK_EXEC (0x04) /* break on execution */
	#define BRK_CNT (0x08) /* break on terminal count */
	#endif

	struct mem_wrd
	{
	/* Simulator instruction break down. */
	struct IR_FIELDS opcode;
	union {
	/* Memory element break down. */
	unsigned long l;
	unsigned short s[2];
	unsigned char c[4];
	} mem;
	};

	/* Size of each 32 bit memory model. */
	#define MEMWRDSIZE (sizeof (struct mem_wrd))

	extern struct mem_segs memory[];
	extern struct PROCESSOR m78000;

	struct PROCESSOR
	{
	unsigned WORD
	/* Execute instruction pointer. */
	ip,
	/* Vector base register. */
	vbr,
	/* Processor status register. */
	psr;

	/* Source 1. */
	WORD S1bus,
	/* Source 2. */
	S2bus,
	/* Destination. */
	Dbus,
	/* Data address bus. */
	DAbus,
	ALU,
	/* Data registers. */
	Regs[REGs],
	/* Max clocks before reg is available. */
	time_left[REGs],
	/* Writeback priority of reg. */
	wb_pri[REGs],
	/* Integer unit control regs. */
	SFU0_regs[REGs],
	/* Floating point control regs. */
	SFU1_regs[REGs],
	Scoreboard[REGs],
	Vbr;
	unsigned WORD scoreboard,
	Psw,
	Tpsw;
	/* Waiting for a jump instruction. */
	FLAG jump_pending:1;
	};

	/* Size of immediate field. */

	#define i26bit 1
	#define i16bit 2
	#define i10bit 3

	/* Definitions for fields in psr. */

	#define psr_mode 31
	#define psr_rbo 30
	#define psr_ser 29
	#define psr_carry 28
	#define psr_sf7m 11
	#define psr_sf6m 10
	#define psr_sf5m 9
	#define psr_sf4m 8
	#define psr_sf3m 7
	#define psr_sf2m 6
	#define psr_sf1m 5
	#define psr_mam 4
	#define psr_inm 3
	#define psr_exm 2
	#define psr_trm 1
	#define psr_ovfm 0

	/* The 1 clock operations. */

	#define ADDU 1
	#define ADDC 2
	#define ADDUC 3
	#define ADD 4

	#define SUBU ADD+1
	#define SUBB ADD+2
	#define SUBUB ADD+3
	#define SUB ADD+4

	#define AND_ ADD+5
	#define OR ADD+6
	#define XOR ADD+7
	#define CMP ADD+8

	/* Loads. */

	#define LDAB CMP+1
	#define LDAH CMP+2
	#define LDA CMP+3
	#define LDAD CMP+4

	#define LDB LDAD+1
	#define LDH LDAD+2
	#define LD LDAD+3
	#define LDD LDAD+4
	#define LDBU LDAD+5
	#define LDHU LDAD+6

	/* Stores. */

	#define STB LDHU+1
	#define STH LDHU+2
	#define ST LDHU+3
	#define STD LDHU+4

	/* Exchange. */

	#define XMEMBU LDHU+5
	#define XMEM LDHU+6

	/* Branches. */

	#define JSR STD+1
	#define BSR STD+2
	#define BR STD+3
	#define JMP STD+4
	#define BB1 STD+5
	#define BB0 STD+6
	#define RTN STD+7
	#define BCND STD+8

	/* Traps. */

	#define TB1 BCND+1
	#define TB0 BCND+2
	#define TCND BCND+3
	#define RTE BCND+4
	#define TBND BCND+5

	/* Misc. */

	#define MUL TBND + 1
	#define DIV MUL +2
	#define DIVU MUL +3
	#define MASK MUL +4
	#define FF0 MUL +5
	#define FF1 MUL +6
	#define CLR MUL +7
	#define SET MUL +8
	#define EXT MUL +9
	#define EXTU MUL +10
	#define MAK MUL +11
	#define ROT MUL +12

	/* Control register manipulations. */

	#define LDCR ROT +1
	#define STCR ROT +2
	#define XCR ROT +3

	#define FLDCR ROT +4
	#define FSTCR ROT +5
	#define FXCR ROT +6

	#define NOP XCR +1

	/* Floating point instructions. */

	#define FADD NOP +1
	#define FSUB NOP +2
	#define FMUL NOP +3
	#define FDIV NOP +4
	#define FSQRT NOP +5
	#define FCMP NOP +6
	#define FIP NOP +7
	#define FLT NOP +8
	#define INT NOP +9
	#define NINT NOP +10
	#define TRNC NOP +11
	#define FLDC NOP +12
	#define FSTC NOP +13
	#define FXC NOP +14

	#define UEXT(src,off,wid) \
	((((unsigned int)(src)) >> (off)) & ((1 << (wid)) - 1))

	#define SEXT(src,off,wid) \
	(((((int)(src))<<(32 - ((off) + (wid)))) >>(32 - (wid))) )

	#define MAKE(src,off,wid) \
	((((unsigned int)(src)) & ((1 << (wid)) - 1)) << (off))

	#define opword(n) (unsigned long) (memaddr->mem.l)

	/* Constants and masks. */

	#define SFU0 0x80000000
	#define SFU1 0x84000000
	#define SFU7 0x9c000000
	#define RRI10 0xf0000000
	#define RRR 0xf4000000
	#define SFUMASK 0xfc00ffe0
	#define RRRMASK 0xfc00ffe0
	#define RRI10MASK 0xfc00fc00
	#define DEFMASK 0xfc000000
	#define CTRL 0x0000f000
	#define CTRLMASK 0xfc00f800

	/* Operands types. */

	enum operand_type
	{
	HEX = 1,
	REG = 2,
	CONT = 3,
	IND = 3,
	BF = 4,
	/* Scaled register. */
	REGSC = 5,
	/* Control register. */
	CRREG = 6,
	/* Floating point control register. */
	FCRREG = 7,
	PCREL = 8,
	CONDMASK = 9,
	/* Extended register. */
	XREG = 10,
	/* Decimal. */
	DEC = 11
	};

	/* Hashing specification. */

	#define HASHVAL 79

	/* Structure templates. */

	typedef struct
	{
	unsigned int offset;
	unsigned int width;
	enum operand_type type;
	} OPSPEC;

	struct SIM_FLAGS
	{
	int ltncy, /* latency (max number of clocks needed to execute). */
	extime, /* execution time (min number of clocks needed to execute). */
	wb_pri; /* writeback slot priority. */
	unsigned op:OP, /* simulator version of opcode. */
	imm_flags:2, /* 10,16 or 26 bit immediate flags. */
	rs1_used:1, /* register source 1 used. */
	rs2_used:1, /* register source 2 used. */
	rsd_used:1, /* register source/dest used. */
	c_flag:1, /* complement. */
	u_flag:1, /* upper half word. */
	n_flag:1, /* execute next. */
	wb_flag:1, /* uses writeback slot. */
	dest_64:1, /* double precision dest. */
	s1_64:1, /* double precision source 1. */
	s2_64:1, /* double precision source 2. */
	scale_flag:1; /* register is scaled. */
	};

	typedef struct INSTRUCTAB {
	unsigned int opcode;
	char *mnemonic;
	OPSPEC op1,op2,op3;
	struct SIM_FLAGS flgs;
	} INSTAB;


	#define NO_OPERAND {0,0,0}

	extern const INSTAB instructions[];

	/*
	* Local Variables:
	* fill-column: 131
	* End:
	*/