build/tools/ndk-common.sh - toolchain/prebuilts/ndk/r17 - Git at Google

 # Copyright (C) 2009 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # A collection of shell function definitions used by various build scripts
 # in the Android NDK (Native Development Kit)
 #

 # Get current script name into PROGNAME
 PROGNAME=`basename $0`

 if [ -z "$TMPDIR" ]; then
     export TMPDIR=/tmp/ndk-$USER
 fi

 OS=`uname -s`
 if [ "$OS" == "Darwin" -a -z "$MACOSX_DEPLOYMENT_TARGET" ]; then
     export MACOSX_DEPLOYMENT_TARGET="10.8"
 fi

 # Find the Android NDK root, assuming we are invoked from a script
 # within its directory structure.
 #
 # $1: Variable name that will receive the path
 # $2: Path of invoking script
 find_ndk_root ()
 {
     # Try to auto-detect the NDK root by walking up the directory
     # path to the current script.
     local PROGDIR="`dirname \"$2\"`"
     while [ -n "1" ] ; do
         if [ -d "$PROGDIR/build/core" ] ; then
             break
         fi
         if [ -z "$PROGDIR" -o "$PROGDIR" = '/' ] ; then
             return 1
         fi
         PROGDIR="`cd \"$PROGDIR/..\" && pwd`"
     done
     eval $1="$PROGDIR"
 }

 # Put location of Android NDK into ANDROID_NDK_ROOT and
 # perform a tiny amount of sanity check
 #
 if [ -z "$ANDROID_NDK_ROOT" ] ; then
     find_ndk_root ANDROID_NDK_ROOT "$0"
     if [ $? != 0 ]; then
         echo "Please define ANDROID_NDK_ROOT to point to the root of your"
         echo "Android NDK installation."
         exit 1
     fi
 fi

 echo "$ANDROID_NDK_ROOT" | grep -q -e " "
 if [ $? = 0 ] ; then
     echo "ERROR: The Android NDK installation path contains a space !"
     echo "Please install to a different location."
     exit 1
 fi

 if [ ! -d $ANDROID_NDK_ROOT ] ; then
     echo "ERROR: Your ANDROID_NDK_ROOT variable does not point to a directory."
     echo "ANDROID_NDK_ROOT=$ANDROID_NDK_ROOT"
     exit 1
 fi

 if [ ! -f $ANDROID_NDK_ROOT/build/tools/ndk-common.sh ] ; then
     echo "ERROR: Your ANDROID_NDK_ROOT does not contain a valid NDK build system."
     echo "ANDROID_NDK_ROOT=$ANDROID_NDK_ROOT"
     exit 1
 fi

 ## Use DRYRUN to find out top-level commands.
 DRYRUN=${DRYRUN-no}

 ## Logging support
 ##
 VERBOSE=${VERBOSE-yes}

 dump ()
 {
     echo "$@"
 }

 dump_n ()
 {
     printf %s "$@"
 }

 log ()
 {
     if [ "$VERBOSE" = "yes" ] ; then
         echo "$@"
     fi
 }

 log_n ()
 {
     if [ "$VERBOSE" = "yes" ] ; then
         printf %s "$@"
     fi
 }

 run ()
 {
     if [ "$DRYRUN" = "yes" ] ; then
         echo "## SKIP COMMAND: $@"
     elif [ "$VERBOSE" = "yes" ] ; then
         echo "## COMMAND: $@"
         "$@" 2>&1
     else
         "$@" > /dev/null 2>&1
     fi
 }

 panic ()
 {
     dump "ERROR: $@"
     exit 1
 }

 fail_panic ()
 {
     if [ $? != 0 ] ; then
         dump "ERROR: $@"
         exit 1
     fi
 }

 fail_warning ()
 {
     if [ $? != 0 ] ; then
         dump "WARNING: $@"
     fi
 }


 ## Utilities
 ##

 # Return the value of a given named variable
 # $1: variable name
 #
 # example:
 #    FOO=BAR
 #    BAR=ZOO
 #    echo `var_value $FOO`
 #    will print 'ZOO'
 #
 var_value ()
 {
     # find a better way to do that ?
     eval echo "$`echo $1`"
 }

 # convert to uppercase
 # assumes tr is installed on the platform ?
 #
 to_uppercase ()
 {
     echo $1 | tr "[:lower:]" "[:upper:]"
 }

 ## First, we need to detect the HOST CPU, because proper HOST_ARCH detection
 ## requires platform-specific tricks.
 ##
 HOST_EXE=""
 HOST_OS=`uname -s`
 HOST_ARCH=x86_64
 case "$HOST_OS" in
     Darwin)
         HOST_OS=darwin
         ;;
     Linux)
         # note that building  32-bit binaries on x86_64 is handled later
         HOST_OS=linux
         ;;
     FreeBsd)  # note: this is not tested
         HOST_OS=freebsd
         ;;
     CYGWIN*|*_NT-*)
         HOST_OS=windows
         HOST_EXE=.exe
         HOST_ARCH=`uname -m`
         if [ "x$OSTYPE" = xcygwin ] ; then
             HOST_OS=cygwin
         fi
         ;;
 esac

 log "HOST_OS=$HOST_OS"
 log "HOST_EXE=$HOST_EXE"
 log "HOST_ARCH=$HOST_ARCH"

 # at this point, the supported values for HOST_ARCH are:
 #   x86
 #   x86_64
 #
 # other values may be possible but haven't been tested
 #
 # at this point, the value of HOST_OS should be one of the following:
 #   linux
 #   darwin
 #    windows (MSys)
 #    cygwin
 #
 # Note that cygwin is treated as a special case because it behaves very differently
 # for a few things. Other values may be possible but have not been tested
 #

 # define HOST_TAG as a unique tag used to identify both the host OS and CPU
 # supported values are:
 #
 #   linux-x86_64
 #   darwin-x86_64
 #   windows
 #   windows-x86_64
 #
 # other values are possible but were not tested.
 #
 compute_host_tag ()
 {
     HOST_TAG=${HOST_OS}-${HOST_ARCH}
     # Special case for windows-x86 => windows
     case $HOST_TAG in
         windows-x86|cygwin-x86)
             HOST_TAG="windows"
             ;;
         cygwin-x86_64)
             HOST_TAG="windows-x86_64"
             ;;
     esac
     log "HOST_TAG=$HOST_TAG"
 }

 compute_host_tag

 # Compute the number of host CPU cores an HOST_NUM_CPUS
 #
 case "$HOST_OS" in
     linux)
         HOST_NUM_CPUS=`cat /proc/cpuinfo | grep processor | wc -l`
         ;;
     darwin|freebsd)
         HOST_NUM_CPUS=`sysctl -n hw.ncpu`
         ;;
     windows|cygwin)
         HOST_NUM_CPUS=$NUMBER_OF_PROCESSORS
         ;;
     *)  # let's play safe here
         HOST_NUM_CPUS=1
 esac

 log "HOST_NUM_CPUS=$HOST_NUM_CPUS"

 # If BUILD_NUM_CPUS is not already defined in your environment,
 # define it as the double of HOST_NUM_CPUS. This is used to
 # run Make commands in parralles, as in 'make -j$BUILD_NUM_CPUS'
 #
 if [ -z "$BUILD_NUM_CPUS" ] ; then
     BUILD_NUM_CPUS=`expr $HOST_NUM_CPUS \* 2`
 fi

 log "BUILD_NUM_CPUS=$BUILD_NUM_CPUS"


 ##  HOST TOOLCHAIN SUPPORT
 ##

 # force the generation of 32-bit binaries on 64-bit systems
 #
 FORCE_32BIT=no
 force_32bit_binaries ()
 {
     if [ "$HOST_ARCH" = x86_64 ] ; then
         log "Forcing generation of 32-bit host binaries on $HOST_ARCH"
         FORCE_32BIT=yes
         HOST_ARCH=x86
         log "HOST_ARCH=$HOST_ARCH"
         compute_host_tag
     fi
 }

 # On Windows, cygwin binaries will be generated by default, but
 # you can force mingw ones that do not link to cygwin.dll if you
 # call this function.
 #
 disable_cygwin ()
 {
     if [ $HOST_OS = cygwin ] ; then
         log "Disabling cygwin binaries generation"
         CFLAGS="$CFLAGS -mno-cygwin"
         LDFLAGS="$LDFLAGS -mno-cygwin"
         HOST_OS=windows
         compute_host_tag
     fi
 }

 # Various probes are going to need to run a small C program
 mkdir -p $TMPDIR/tmp/tests

 TMPC=$TMPDIR/tmp/tests/test-$$.c
 TMPO=$TMPDIR/tmp/tests/test-$$.o
 TMPE=$TMPDIR/tmp/tests/test-$$$EXE
 TMPL=$TMPDIR/tmp/tests/test-$$.log

 # cleanup temporary files
 clean_temp ()
 {
     rm -f $TMPC $TMPO $TMPL $TMPE
 }

 # cleanup temp files then exit with an error
 clean_exit ()
 {
     clean_temp
     exit 1
 }

 # this function will setup the compiler and linker and check that they work as advertised
 # note that you should call 'force_32bit_binaries' before this one if you want it to
 # generate 32-bit binaries on 64-bit systems (that support it).
 #
 setup_toolchain ()
 {
     if [ -z "$CC" ] ; then
         CC=gcc
     fi
     if [ -z "$CXX" ] ; then
         CXX=g++
     fi
     if [ -z "$CXXFLAGS" ] ; then
         CXXFLAGS="$CFLAGS"
     fi
     if [ -z "$LD" ] ; then
         LD="$CC"
     fi

     log "Using '$CC' as the C compiler"

     # check that we can compile a trivial C program with this compiler
     mkdir -p $(dirname "$TMPC")
     cat > $TMPC <<EOF
 int main(void) {}
 EOF

     if [ "$FORCE_32BIT" = yes ] ; then
         CC="$CC -m32"
         CXX="$CXX -m32"
         LD="$LD -m32"
         compile
         if [ $? != 0 ] ; then
             # sometimes, we need to also tell the assembler to generate 32-bit binaries
             # this is highly dependent on your GCC installation (and no, we can't set
             # this flag all the time)
             CFLAGS="$CFLAGS -Wa,--32"
             compile
         fi
     fi

     compile
     if [ $? != 0 ] ; then
         echo "your C compiler doesn't seem to work:"
         cat $TMPL
         clean_exit
     fi
     log "CC         : compiler check ok ($CC)"

     # check that we can link the trivial program into an executable
     link
     if [ $? != 0 ] ; then
         OLD_LD="$LD"
         LD="$CC"
         compile
         link
         if [ $? != 0 ] ; then
             LD="$OLD_LD"
             echo "your linker doesn't seem to work:"
             cat $TMPL
             clean_exit
         fi
     fi
     log "Using '$LD' as the linker"
     log "LD         : linker check ok ($LD)"

     # check the C++ compiler
     log "Using '$CXX' as the C++ compiler"

     cat > $TMPC <<EOF
 #include <iostream>
 using namespace std;
 int main()
 {
   cout << "Hello World!" << endl;
   return 0;
 }
 EOF

     compile_cpp
     if [ $? != 0 ] ; then
         echo "your C++ compiler doesn't seem to work"
         cat $TMPL
         clean_exit
     fi

     log "CXX        : C++ compiler check ok ($CXX)"

     # XXX: TODO perform AR checks
     AR=ar
     ARFLAGS=
 }

 # try to compile the current source file in $TMPC into an object
 # stores the error log into $TMPL
 #
 compile ()
 {
     log "Object     : $CC -o $TMPO -c $CFLAGS $TMPC"
     $CC -o $TMPO -c $CFLAGS $TMPC 2> $TMPL
 }

 compile_cpp ()
 {
     log "Object     : $CXX -o $TMPO -c $CXXFLAGS $TMPC"
     $CXX -o $TMPO -c $CXXFLAGS $TMPC 2> $TMPL
 }

 # try to link the recently built file into an executable. error log in $TMPL
 #
 link()
 {
     log "Link      : $LD -o $TMPE $TMPO $LDFLAGS"
     $LD -o $TMPE $TMPO $LDFLAGS 2> $TMPL
 }

 # run a command
 #
 execute()
 {
     log "Running: $*"
     $*
 }

 # perform a simple compile / link / run of the source file in $TMPC
 compile_exec_run()
 {
     log "RunExec    : $CC -o $TMPE $CFLAGS $TMPC"
     compile
     if [ $? != 0 ] ; then
         echo "Failure to compile test program"
         cat $TMPC
         cat $TMPL
         clean_exit
     fi
     link
     if [ $? != 0 ] ; then
         echo "Failure to link test program"
         cat $TMPC
         echo "------"
         cat $TMPL
         clean_exit
     fi
     $TMPE
 }

 pattern_match ()
 {
     echo "$2" | grep -q -E -e "$1"
 }

 # Let's check that we have a working md5sum here
 check_md5sum ()
 {
     A_MD5=`echo "A" | md5sum | cut -d' ' -f1`
     if [ "$A_MD5" != "bf072e9119077b4e76437a93986787ef" ] ; then
         echo "Please install md5sum on this machine"
         exit 2
     fi
 }

 # Find if a given shell program is available.
 # We need to take care of the fact that the 'which <foo>' command
 # may return either an empty string (Linux) or something like
 # "no <foo> in ..." (Darwin). Also, we need to redirect stderr
 # to /dev/null for Cygwin
 #
 # $1: variable name
 # $2: program name
 #
 # Result: set $1 to the full path of the corresponding command
 #         or to the empty/undefined string if not available
 #
 find_program ()
 {
     local PROG RET
     PROG=`which $2 2>/dev/null`
     RET=$?
     if [ $RET != 0 ]; then
         PROG=
     fi
     eval $1=\"$PROG\"
     return $RET
 }

 prepare_download ()
 {
     find_program CMD_WGET wget
     find_program CMD_CURL curl
     find_program CMD_SCRP scp
 }

 find_pbzip2 ()
 {
     if [ -z "$_PBZIP2_initialized" ] ; then
         find_program PBZIP2 pbzip2
         _PBZIP2_initialized="yes"
     fi
 }

 # Download a file with either 'curl', 'wget' or 'scp'
 #
 # $1: source URL (e.g. http://foo.com, ssh://blah, /some/path)
 # $2: target file
 download_file ()
 {
     # Is this HTTP, HTTPS or FTP ?
     if pattern_match "^(http|https|ftp):.*" "$1"; then
         if [ -n "$CMD_WGET" ] ; then
             run $CMD_WGET -O $2 $1
         elif [ -n "$CMD_CURL" ] ; then
             run $CMD_CURL -o $2 $1
         else
             echo "Please install wget or curl on this machine"
             exit 1
         fi
         return
     fi

     # Is this SSH ?
     # Accept both ssh://<path> or <machine>:<path>
     #
     if pattern_match "^(ssh|[^:]+):.*" "$1"; then
         if [ -n "$CMD_SCP" ] ; then
             scp_src=`echo $1 | sed -e s%ssh://%%g`
             run $CMD_SCP $scp_src $2
         else
             echo "Please install scp on this machine"
             exit 1
         fi
         return
     fi

     # Is this a file copy ?
     # Accept both file://<path> or /<path>
     #
     if pattern_match "^(file://|/).*" "$1"; then
         cp_src=`echo $1 | sed -e s%^file://%%g`
         run cp -f $cp_src $2
         return
     fi
 }

 # Form the relative path between from one abs path to another
 #
 # $1 : start path
 # $2 : end path
 #
 # From:
 # http://stackoverflow.com/questions/2564634/bash-convert-absolute-path-into-relative-path-given-a-current-directory
 relpath ()
 {
     [ $# -ge 1 ] && [ $# -le 2 ] || return 1
     current="${2:+"$1"}"
     target="${2:-"$1"}"
     [ "$target" != . ] || target=/
     target="/${target##/}"
     [ "$current" != . ] || current=/
     current="${current:="/"}"
     current="/${current##/}"
     appendix="${target##/}"
     relative=''
     while appendix="${target#"$current"/}"
         [ "$current" != '/' ] && [ "$appendix" = "$target" ]; do
         if [ "$current" = "$appendix" ]; then
             relative="${relative:-.}"
             echo "${relative#/}"
             return 0
         fi
         current="${current%/*}"
         relative="$relative${relative:+/}.."
     done
     relative="$relative${relative:+${appendix:+/}}${appendix#/}"
     echo "$relative"
 }

 # Pack a given archive
 #
 # $1: archive file path (including extension)
 # $2: source directory for archive content
 # $3+: list of files (including patterns), all if empty
 pack_archive ()
 {
     local ARCHIVE="$1"
     local SRCDIR="$2"
     local SRCFILES
     local TARFLAGS ZIPFLAGS
     shift; shift;
     if [ -z "$1" ] ; then
         SRCFILES="*"
     else
         SRCFILES="$@"
     fi
     if [ "`basename $ARCHIVE`" = "$ARCHIVE" ] ; then
         ARCHIVE="`pwd`/$ARCHIVE"
     fi
     mkdir -p `dirname $ARCHIVE`

     TARFLAGS="--exclude='*.py[cod]' --exclude='*.swp' --exclude=.git --exclude=.gitignore -cf"
     ZIPFLAGS="-x *.git* -x *.pyc -x *.pyo -0qr"
     # Ensure symlinks are stored as is in zip files. for toolchains
     # this can save up to 7 MB in the size of the final archive
     #ZIPFLAGS="$ZIPFLAGS --symlinks"
     case "$ARCHIVE" in
         *.zip)
             rm -f $ARCHIVE
             (cd $SRCDIR && run zip $ZIPFLAGS "$ARCHIVE" $SRCFILES)
             ;;
         *.tar.bz2)
             find_pbzip2
             if [ -n "$PBZIP2" ] ; then
                 (cd $SRCDIR && run tar --use-compress-prog=pbzip2 $TARFLAGS "$ARCHIVE" $SRCFILES)
             else
                 (cd $SRCDIR && run tar -j $TARFLAGS "$ARCHIVE" $SRCFILES)
             fi
             ;;
         *)
             panic "Unsupported archive format: $ARCHIVE"
             ;;
     esac
 }

 # Copy a directory, create target location if needed
 #
 # $1: source directory
 # $2: target directory location
 #
 copy_directory ()
 {
     local SRCDIR="$1"
     local DSTDIR="$2"
     if [ ! -d "$SRCDIR" ] ; then
         panic "Can't copy from non-directory: $SRCDIR"
     fi
     log "Copying directory: "
     log "  from $SRCDIR"
     log "  to $DSTDIR"
     mkdir -p "$DSTDIR" && (cd "$SRCDIR" && 2>/dev/null tar cf - *) | (tar xf - -C "$DSTDIR")
     fail_panic "Cannot copy to directory: $DSTDIR"
 }

 # Move a directory, create target location if needed
 #
 # $1: source directory
 # $2: target directory location
 #
 move_directory ()
 {
     local SRCDIR="$1"
     local DSTDIR="$2"
     if [ ! -d "$SRCDIR" ] ; then
         panic "Can't move from non-directory: $SRCDIR"
     fi
     log "Move directory: "
     log "  from $SRCDIR"
     log "  to $DSTDIR"
     mkdir -p "$DSTDIR" && (mv "$SRCDIR"/* "$DSTDIR")
     fail_panic "Cannot move to directory: $DSTDIR"
 }

 # This is the same than copy_directory(), but symlinks will be replaced
 # by the file they actually point to instead.
 copy_directory_nolinks ()
 {
     local SRCDIR="$1"
     local DSTDIR="$2"
     if [ ! -d "$SRCDIR" ] ; then
         panic "Can't copy from non-directory: $SRCDIR"
     fi
     log "Copying directory (without symlinks): "
     log "  from $SRCDIR"
     log "  to $DSTDIR"
     mkdir -p "$DSTDIR" && (cd "$SRCDIR" && tar chf - *) | (tar xf - -C "$DSTDIR")
     fail_panic "Cannot copy to directory: $DSTDIR"
 }

 # Copy certain files from one directory to another one
 # $1: source directory
 # $2: target directory
 # $3+: file list (including patterns)
 copy_file_list ()
 {
     local SRCDIR="$1"
     local DSTDIR="$2"
     shift; shift;
     if [ ! -d "$SRCDIR" ] ; then
         panic "Cant' copy from non-directory: $SRCDIR"
     fi
     log "Copying file: $@"
     log "  from $SRCDIR"
     log "  to $DSTDIR"
     mkdir -p "$DSTDIR" && (cd "$SRCDIR" && (echo $@ | tr ' ' '\n' | tar hcf - -T -)) | (tar xf - -C "$DSTDIR")
     fail_panic "Cannot copy files to directory: $DSTDIR"
 }

 # Rotate a log file
 # If the given log file exist, add a -1 to the end of the file.
 # If older log files exist, rename them to -<n+1>
 # $1: log file
 # $2: maximum version to retain [optional]
 rotate_log ()
 {
     # Default Maximum versions to retain
     local MAXVER="5"
     local LOGFILE="$1"
     shift;
     if [ ! -z "$1" ] ; then
         local tmpmax="$1"
         shift;
         tmpmax=`expr $tmpmax + 0`
         if [ $tmpmax -lt 1 ] ; then
             panic "Invalid maximum log file versions '$tmpmax' invalid; defaulting to $MAXVER"
         else
             MAXVER=$tmpmax;
         fi
     fi

     # Do Nothing if the log file does not exist
     if [ ! -f "${LOGFILE}" ] ; then
         return
     fi

     # Rename existing older versions
     ver=$MAXVER
     while [ $ver -ge 1 ]
     do
         local prev=$(( $ver - 1 ))
         local old="-$prev"

         # Instead of old version 0; use the original filename
         if [ $ver -eq 1 ] ; then
             old=""
         fi

         if [ -f "${LOGFILE}${old}" ] ; then
             mv -f "${LOGFILE}${old}" "${LOGFILE}-${ver}"
         fi

         ver=$prev
     done
 }

 # Dereference symlink
 # $1+: directories
 dereference_symlink ()
 {
     local DIRECTORY SYMLINKS DIR FILE LINK
     for DIRECTORY in "$@"; do
         if [ -d "$DIRECTORY" ]; then
             while true; do
                 # Find all symlinks in this directory.
                 SYMLINKS=`find $DIRECTORY -type l`
                 if [ -z "$SYMLINKS" ]; then
                     break;
                 fi
                 # Iterate symlinks
                 for SYMLINK in $SYMLINKS; do
                     if [ -L "$SYMLINK" ]; then
                         DIR=`dirname "$SYMLINK"`
                         FILE=`basename "$SYMLINK"`
                         # Note that if `readlink $FILE` is also a link, we want to deal
                         # with it in the next iteration.  There is potential infinite-loop
                         # situation for cicular link doesn't exist in our case, though.
                         (cd "$DIR" && \
                          LINK=`readlink "$FILE"` && \
                          test ! -L "$LINK" && \
                          rm -f "$FILE" && \
                          cp -a "$LINK" "$FILE")
                     fi
                 done
             done
         fi
     done
 }
	# Copyright (C) 2009 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# A collection of shell function definitions used by various build scripts
	# in the Android NDK (Native Development Kit)
	#

	# Get current script name into PROGNAME
	PROGNAME=`basename $0`

	if [ -z "$TMPDIR" ]; then
	export TMPDIR=/tmp/ndk-$USER
	fi

	OS=`uname -s`
	if [ "$OS" == "Darwin" -a -z "$MACOSX_DEPLOYMENT_TARGET" ]; then
	export MACOSX_DEPLOYMENT_TARGET="10.8"
	fi

	# Find the Android NDK root, assuming we are invoked from a script
	# within its directory structure.
	#
	# $1: Variable name that will receive the path
	# $2: Path of invoking script
	find_ndk_root ()
	{
	# Try to auto-detect the NDK root by walking up the directory
	# path to the current script.
	local PROGDIR="`dirname \"$2\"`"
	while [ -n "1" ] ; do
	if [ -d "$PROGDIR/build/core" ] ; then
	break
	fi
	if [ -z "$PROGDIR" -o "$PROGDIR" = '/' ] ; then
	return 1
	fi
	PROGDIR="`cd \"$PROGDIR/..\" && pwd`"
	done
	eval $1="$PROGDIR"
	}

	# Put location of Android NDK into ANDROID_NDK_ROOT and
	# perform a tiny amount of sanity check
	#
	if [ -z "$ANDROID_NDK_ROOT" ] ; then
	find_ndk_root ANDROID_NDK_ROOT "$0"
	if [ $? != 0 ]; then
	echo "Please define ANDROID_NDK_ROOT to point to the root of your"
	echo "Android NDK installation."
	exit 1
	fi
	fi

	echo "$ANDROID_NDK_ROOT" \| grep -q -e " "
	if [ $? = 0 ] ; then
	echo "ERROR: The Android NDK installation path contains a space !"
	echo "Please install to a different location."
	exit 1
	fi

	if [ ! -d $ANDROID_NDK_ROOT ] ; then
	echo "ERROR: Your ANDROID_NDK_ROOT variable does not point to a directory."
	echo "ANDROID_NDK_ROOT=$ANDROID_NDK_ROOT"
	exit 1
	fi

	if [ ! -f $ANDROID_NDK_ROOT/build/tools/ndk-common.sh ] ; then
	echo "ERROR: Your ANDROID_NDK_ROOT does not contain a valid NDK build system."
	echo "ANDROID_NDK_ROOT=$ANDROID_NDK_ROOT"
	exit 1
	fi

	## Use DRYRUN to find out top-level commands.
	DRYRUN=${DRYRUN-no}

	## Logging support
	##
	VERBOSE=${VERBOSE-yes}

	dump ()
	{
	echo "$@"
	}

	dump_n ()
	{
	printf %s "$@"
	}

	log ()
	{
	if [ "$VERBOSE" = "yes" ] ; then
	echo "$@"
	fi
	}

	log_n ()
	{
	if [ "$VERBOSE" = "yes" ] ; then
	printf %s "$@"
	fi
	}

	run ()
	{
	if [ "$DRYRUN" = "yes" ] ; then
	echo "## SKIP COMMAND: $@"
	elif [ "$VERBOSE" = "yes" ] ; then
	echo "## COMMAND: $@"
	"$@" 2>&1
	else
	"$@" > /dev/null 2>&1
	fi
	}

	panic ()
	{
	dump "ERROR: $@"
	exit 1
	}

	fail_panic ()
	{
	if [ $? != 0 ] ; then
	dump "ERROR: $@"
	exit 1
	fi
	}

	fail_warning ()
	{
	if [ $? != 0 ] ; then
	dump "WARNING: $@"
	fi
	}


	## Utilities
	##

	# Return the value of a given named variable
	# $1: variable name
	#
	# example:
	# FOO=BAR
	# BAR=ZOO
	# echo `var_value $FOO`
	# will print 'ZOO'
	#
	var_value ()
	{
	# find a better way to do that ?
	eval echo "$`echo $1`"
	}

	# convert to uppercase
	# assumes tr is installed on the platform ?
	#
	to_uppercase ()
	{
	echo $1 \| tr "[:lower:]" "[:upper:]"
	}

	## First, we need to detect the HOST CPU, because proper HOST_ARCH detection
	## requires platform-specific tricks.
	##
	HOST_EXE=""
	HOST_OS=`uname -s`
	HOST_ARCH=x86_64
	case "$HOST_OS" in
	Darwin)
	HOST_OS=darwin
	;;
	Linux)
	# note that building 32-bit binaries on x86_64 is handled later
	HOST_OS=linux
	;;
	FreeBsd) # note: this is not tested
	HOST_OS=freebsd
	;;
	CYGWIN\|_NT-*)
	HOST_OS=windows
	HOST_EXE=.exe
	HOST_ARCH=`uname -m`
	if [ "x$OSTYPE" = xcygwin ] ; then
	HOST_OS=cygwin
	fi
	;;
	esac

	log "HOST_OS=$HOST_OS"
	log "HOST_EXE=$HOST_EXE"
	log "HOST_ARCH=$HOST_ARCH"

	# at this point, the supported values for HOST_ARCH are:
	# x86
	# x86_64
	#
	# other values may be possible but haven't been tested
	#
	# at this point, the value of HOST_OS should be one of the following:
	# linux
	# darwin
	# windows (MSys)
	# cygwin
	#
	# Note that cygwin is treated as a special case because it behaves very differently
	# for a few things. Other values may be possible but have not been tested
	#

	# define HOST_TAG as a unique tag used to identify both the host OS and CPU
	# supported values are:
	#
	# linux-x86_64
	# darwin-x86_64
	# windows
	# windows-x86_64
	#
	# other values are possible but were not tested.
	#
	compute_host_tag ()
	{
	HOST_TAG=${HOST_OS}-${HOST_ARCH}
	# Special case for windows-x86 => windows
	case $HOST_TAG in
	windows-x86\|cygwin-x86)
	HOST_TAG="windows"
	;;
	cygwin-x86_64)
	HOST_TAG="windows-x86_64"
	;;
	esac
	log "HOST_TAG=$HOST_TAG"
	}

	compute_host_tag

	# Compute the number of host CPU cores an HOST_NUM_CPUS
	#
	case "$HOST_OS" in
	linux)
	HOST_NUM_CPUS=`cat /proc/cpuinfo \| grep processor \| wc -l`
	;;
	darwin\|freebsd)
	HOST_NUM_CPUS=`sysctl -n hw.ncpu`
	;;
	windows\|cygwin)
	HOST_NUM_CPUS=$NUMBER_OF_PROCESSORS
	;;
	*) # let's play safe here
	HOST_NUM_CPUS=1
	esac

	log "HOST_NUM_CPUS=$HOST_NUM_CPUS"

	# If BUILD_NUM_CPUS is not already defined in your environment,
	# define it as the double of HOST_NUM_CPUS. This is used to
	# run Make commands in parralles, as in 'make -j$BUILD_NUM_CPUS'
	#
	if [ -z "$BUILD_NUM_CPUS" ] ; then
	BUILD_NUM_CPUS=`expr $HOST_NUM_CPUS \* 2`
	fi

	log "BUILD_NUM_CPUS=$BUILD_NUM_CPUS"


	## HOST TOOLCHAIN SUPPORT
	##

	# force the generation of 32-bit binaries on 64-bit systems
	#
	FORCE_32BIT=no
	force_32bit_binaries ()
	{
	if [ "$HOST_ARCH" = x86_64 ] ; then
	log "Forcing generation of 32-bit host binaries on $HOST_ARCH"
	FORCE_32BIT=yes
	HOST_ARCH=x86
	log "HOST_ARCH=$HOST_ARCH"
	compute_host_tag
	fi
	}

	# On Windows, cygwin binaries will be generated by default, but
	# you can force mingw ones that do not link to cygwin.dll if you
	# call this function.
	#
	disable_cygwin ()
	{
	if [ $HOST_OS = cygwin ] ; then
	log "Disabling cygwin binaries generation"
	CFLAGS="$CFLAGS -mno-cygwin"
	LDFLAGS="$LDFLAGS -mno-cygwin"
	HOST_OS=windows
	compute_host_tag
	fi
	}

	# Various probes are going to need to run a small C program
	mkdir -p $TMPDIR/tmp/tests

	TMPC=$TMPDIR/tmp/tests/test-$$.c
	TMPO=$TMPDIR/tmp/tests/test-$$.o
	TMPE=$TMPDIR/tmp/tests/test-$$$EXE
	TMPL=$TMPDIR/tmp/tests/test-$$.log

	# cleanup temporary files
	clean_temp ()
	{
	rm -f $TMPC $TMPO $TMPL $TMPE
	}

	# cleanup temp files then exit with an error
	clean_exit ()
	{
	clean_temp
	exit 1
	}

	# this function will setup the compiler and linker and check that they work as advertised
	# note that you should call 'force_32bit_binaries' before this one if you want it to
	# generate 32-bit binaries on 64-bit systems (that support it).
	#
	setup_toolchain ()
	{
	if [ -z "$CC" ] ; then
	CC=gcc
	fi
	if [ -z "$CXX" ] ; then
	CXX=g++
	fi
	if [ -z "$CXXFLAGS" ] ; then
	CXXFLAGS="$CFLAGS"
	fi
	if [ -z "$LD" ] ; then
	LD="$CC"
	fi

	log "Using '$CC' as the C compiler"

	# check that we can compile a trivial C program with this compiler
	mkdir -p $(dirname "$TMPC")
	cat > $TMPC <<EOF
	int main(void) {}
	EOF

	if [ "$FORCE_32BIT" = yes ] ; then
	CC="$CC -m32"
	CXX="$CXX -m32"
	LD="$LD -m32"
	compile
	if [ $? != 0 ] ; then
	# sometimes, we need to also tell the assembler to generate 32-bit binaries
	# this is highly dependent on your GCC installation (and no, we can't set
	# this flag all the time)
	CFLAGS="$CFLAGS -Wa,--32"
	compile
	fi
	fi

	compile
	if [ $? != 0 ] ; then
	echo "your C compiler doesn't seem to work:"
	cat $TMPL
	clean_exit
	fi
	log "CC : compiler check ok ($CC)"

	# check that we can link the trivial program into an executable
	link
	if [ $? != 0 ] ; then
	OLD_LD="$LD"
	LD="$CC"
	compile
	link
	if [ $? != 0 ] ; then
	LD="$OLD_LD"
	echo "your linker doesn't seem to work:"
	cat $TMPL
	clean_exit
	fi
	fi
	log "Using '$LD' as the linker"
	log "LD : linker check ok ($LD)"

	# check the C++ compiler
	log "Using '$CXX' as the C++ compiler"

	cat > $TMPC <<EOF
	#include <iostream>
	using namespace std;
	int main()
	{
	cout << "Hello World!" << endl;
	return 0;
	}
	EOF

	compile_cpp
	if [ $? != 0 ] ; then
	echo "your C++ compiler doesn't seem to work"
	cat $TMPL
	clean_exit
	fi

	log "CXX : C++ compiler check ok ($CXX)"

	# XXX: TODO perform AR checks
	AR=ar
	ARFLAGS=
	}

	# try to compile the current source file in $TMPC into an object
	# stores the error log into $TMPL
	#
	compile ()
	{
	log "Object : $CC -o $TMPO -c $CFLAGS $TMPC"
	$CC -o $TMPO -c $CFLAGS $TMPC 2> $TMPL
	}

	compile_cpp ()
	{
	log "Object : $CXX -o $TMPO -c $CXXFLAGS $TMPC"
	$CXX -o $TMPO -c $CXXFLAGS $TMPC 2> $TMPL
	}

	# try to link the recently built file into an executable. error log in $TMPL
	#
	link()
	{
	log "Link : $LD -o $TMPE $TMPO $LDFLAGS"
	$LD -o $TMPE $TMPO $LDFLAGS 2> $TMPL
	}

	# run a command
	#
	execute()
	{
	log "Running: $*"
	$*
	}

	# perform a simple compile / link / run of the source file in $TMPC
	compile_exec_run()
	{
	log "RunExec : $CC -o $TMPE $CFLAGS $TMPC"
	compile
	if [ $? != 0 ] ; then
	echo "Failure to compile test program"
	cat $TMPC
	cat $TMPL
	clean_exit
	fi
	link
	if [ $? != 0 ] ; then
	echo "Failure to link test program"
	cat $TMPC
	echo "------"
	cat $TMPL
	clean_exit
	fi
	$TMPE
	}

	pattern_match ()
	{
	echo "$2" \| grep -q -E -e "$1"
	}

	# Let's check that we have a working md5sum here
	check_md5sum ()
	{
	A_MD5=`echo "A" \| md5sum \| cut -d' ' -f1`
	if [ "$A_MD5" != "bf072e9119077b4e76437a93986787ef" ] ; then
	echo "Please install md5sum on this machine"
	exit 2
	fi
	}

	# Find if a given shell program is available.
	# We need to take care of the fact that the 'which <foo>' command
	# may return either an empty string (Linux) or something like
	# "no <foo> in ..." (Darwin). Also, we need to redirect stderr
	# to /dev/null for Cygwin
	#
	# $1: variable name
	# $2: program name
	#
	# Result: set $1 to the full path of the corresponding command
	# or to the empty/undefined string if not available
	#
	find_program ()
	{
	local PROG RET
	PROG=`which $2 2>/dev/null`
	RET=$?
	if [ $RET != 0 ]; then
	PROG=
	fi
	eval $1=\"$PROG\"
	return $RET
	}

	prepare_download ()
	{
	find_program CMD_WGET wget
	find_program CMD_CURL curl
	find_program CMD_SCRP scp
	}

	find_pbzip2 ()
	{
	if [ -z "$_PBZIP2_initialized" ] ; then
	find_program PBZIP2 pbzip2
	_PBZIP2_initialized="yes"
	fi
	}

	# Download a file with either 'curl', 'wget' or 'scp'
	#
	# $1: source URL (e.g. http://foo.com, ssh://blah, /some/path)
	# $2: target file
	download_file ()
	{
	# Is this HTTP, HTTPS or FTP ?
	if pattern_match "^(http\|https\|ftp):.*" "$1"; then
	if [ -n "$CMD_WGET" ] ; then
	run $CMD_WGET -O $2 $1
	elif [ -n "$CMD_CURL" ] ; then
	run $CMD_CURL -o $2 $1
	else
	echo "Please install wget or curl on this machine"
	exit 1
	fi
	return
	fi

	# Is this SSH ?
	# Accept both ssh://<path> or <machine>:<path>
	#
	if pattern_match "^(ssh\|[^:]+):.*" "$1"; then
	if [ -n "$CMD_SCP" ] ; then
	scp_src=`echo $1 \| sed -e s%ssh://%%g`
	run $CMD_SCP $scp_src $2
	else
	echo "Please install scp on this machine"
	exit 1
	fi
	return
	fi

	# Is this a file copy ?
	# Accept both file://<path> or /<path>
	#
	if pattern_match "^(file://\|/).*" "$1"; then
	cp_src=`echo $1 \| sed -e s%^file://%%g`
	run cp -f $cp_src $2
	return
	fi
	}

	# Form the relative path between from one abs path to another
	#
	# $1 : start path
	# $2 : end path
	#
	# From:
	# http://stackoverflow.com/questions/2564634/bash-convert-absolute-path-into-relative-path-given-a-current-directory
	relpath ()
	{
	[ $# -ge 1 ] && [ $# -le 2 ] \|\| return 1
	current="${2:+"$1"}"
	target="${2:-"$1"}"
	[ "$target" != . ] \|\| target=/
	target="/${target##/}"
	[ "$current" != . ] \|\| current=/
	current="${current:="/"}"
	current="/${current##/}"
	appendix="${target##/}"
	relative=''
	while appendix="${target#"$current"/}"
	[ "$current" != '/' ] && [ "$appendix" = "$target" ]; do
	if [ "$current" = "$appendix" ]; then
	relative="${relative:-.}"
	echo "${relative#/}"
	return 0
	fi
	current="${current%/*}"
	relative="$relative${relative:+/}.."
	done
	relative="$relative${relative:+${appendix:+/}}${appendix#/}"
	echo "$relative"
	}

	# Pack a given archive
	#
	# $1: archive file path (including extension)
	# $2: source directory for archive content
	# $3+: list of files (including patterns), all if empty
	pack_archive ()
	{
	local ARCHIVE="$1"
	local SRCDIR="$2"
	local SRCFILES
	local TARFLAGS ZIPFLAGS
	shift; shift;
	if [ -z "$1" ] ; then
	SRCFILES="*"
	else
	SRCFILES="$@"
	fi
	if [ "`basename $ARCHIVE`" = "$ARCHIVE" ] ; then
	ARCHIVE="`pwd`/$ARCHIVE"
	fi
	mkdir -p `dirname $ARCHIVE`

	TARFLAGS="--exclude='.py[cod]' --exclude='.swp' --exclude=.git --exclude=.gitignore -cf"
	ZIPFLAGS="-x .git -x .pyc -x .pyo -0qr"
	# Ensure symlinks are stored as is in zip files. for toolchains
	# this can save up to 7 MB in the size of the final archive
	#ZIPFLAGS="$ZIPFLAGS --symlinks"
	case "$ARCHIVE" in
	*.zip)
	rm -f $ARCHIVE
	(cd $SRCDIR && run zip $ZIPFLAGS "$ARCHIVE" $SRCFILES)
	;;
	*.tar.bz2)
	find_pbzip2
	if [ -n "$PBZIP2" ] ; then
	(cd $SRCDIR && run tar --use-compress-prog=pbzip2 $TARFLAGS "$ARCHIVE" $SRCFILES)
	else
	(cd $SRCDIR && run tar -j $TARFLAGS "$ARCHIVE" $SRCFILES)
	fi
	;;
	*)
	panic "Unsupported archive format: $ARCHIVE"
	;;
	esac
	}

	# Copy a directory, create target location if needed
	#
	# $1: source directory
	# $2: target directory location
	#
	copy_directory ()
	{
	local SRCDIR="$1"
	local DSTDIR="$2"
	if [ ! -d "$SRCDIR" ] ; then
	panic "Can't copy from non-directory: $SRCDIR"
	fi
	log "Copying directory: "
	log " from $SRCDIR"
	log " to $DSTDIR"
	mkdir -p "$DSTDIR" && (cd "$SRCDIR" && 2>/dev/null tar cf - *) \| (tar xf - -C "$DSTDIR")
	fail_panic "Cannot copy to directory: $DSTDIR"
	}

	# Move a directory, create target location if needed
	#
	# $1: source directory
	# $2: target directory location
	#
	move_directory ()
	{
	local SRCDIR="$1"
	local DSTDIR="$2"
	if [ ! -d "$SRCDIR" ] ; then
	panic "Can't move from non-directory: $SRCDIR"
	fi
	log "Move directory: "
	log " from $SRCDIR"
	log " to $DSTDIR"
	mkdir -p "$DSTDIR" && (mv "$SRCDIR"/* "$DSTDIR")
	fail_panic "Cannot move to directory: $DSTDIR"
	}

	# This is the same than copy_directory(), but symlinks will be replaced
	# by the file they actually point to instead.
	copy_directory_nolinks ()
	{
	local SRCDIR="$1"
	local DSTDIR="$2"
	if [ ! -d "$SRCDIR" ] ; then
	panic "Can't copy from non-directory: $SRCDIR"
	fi
	log "Copying directory (without symlinks): "
	log " from $SRCDIR"
	log " to $DSTDIR"
	mkdir -p "$DSTDIR" && (cd "$SRCDIR" && tar chf - *) \| (tar xf - -C "$DSTDIR")
	fail_panic "Cannot copy to directory: $DSTDIR"
	}

	# Copy certain files from one directory to another one
	# $1: source directory
	# $2: target directory
	# $3+: file list (including patterns)
	copy_file_list ()
	{
	local SRCDIR="$1"
	local DSTDIR="$2"
	shift; shift;
	if [ ! -d "$SRCDIR" ] ; then
	panic "Cant' copy from non-directory: $SRCDIR"
	fi
	log "Copying file: $@"
	log " from $SRCDIR"
	log " to $DSTDIR"
	mkdir -p "$DSTDIR" && (cd "$SRCDIR" && (echo $@ \| tr ' ' '\n' \| tar hcf - -T -)) \| (tar xf - -C "$DSTDIR")
	fail_panic "Cannot copy files to directory: $DSTDIR"
	}

	# Rotate a log file
	# If the given log file exist, add a -1 to the end of the file.
	# If older log files exist, rename them to -<n+1>
	# $1: log file
	# $2: maximum version to retain [optional]
	rotate_log ()
	{
	# Default Maximum versions to retain
	local MAXVER="5"
	local LOGFILE="$1"
	shift;
	if [ ! -z "$1" ] ; then
	local tmpmax="$1"
	shift;
	tmpmax=`expr $tmpmax + 0`
	if [ $tmpmax -lt 1 ] ; then
	panic "Invalid maximum log file versions '$tmpmax' invalid; defaulting to $MAXVER"
	else
	MAXVER=$tmpmax;
	fi
	fi

	# Do Nothing if the log file does not exist
	if [ ! -f "${LOGFILE}" ] ; then
	return
	fi

	# Rename existing older versions
	ver=$MAXVER
	while [ $ver -ge 1 ]
	do
	local prev=$(( $ver - 1 ))
	local old="-$prev"

	# Instead of old version 0; use the original filename
	if [ $ver -eq 1 ] ; then
	old=""
	fi

	if [ -f "${LOGFILE}${old}" ] ; then
	mv -f "${LOGFILE}${old}" "${LOGFILE}-${ver}"
	fi

	ver=$prev
	done
	}

	# Dereference symlink
	# $1+: directories
	dereference_symlink ()
	{
	local DIRECTORY SYMLINKS DIR FILE LINK
	for DIRECTORY in "$@"; do
	if [ -d "$DIRECTORY" ]; then
	while true; do
	# Find all symlinks in this directory.
	SYMLINKS=`find $DIRECTORY -type l`
	if [ -z "$SYMLINKS" ]; then
	break;
	fi
	# Iterate symlinks
	for SYMLINK in $SYMLINKS; do
	if [ -L "$SYMLINK" ]; then
	DIR=`dirname "$SYMLINK"`
	FILE=`basename "$SYMLINK"`
	# Note that if `readlink $FILE` is also a link, we want to deal
	# with it in the next iteration. There is potential infinite-loop
	# situation for cicular link doesn't exist in our case, though.
	(cd "$DIR" && \
	LINK=`readlink "$FILE"` && \
	test ! -L "$LINK" && \
	rm -f "$FILE" && \
	cp -a "$LINK" "$FILE")
	fi
	done
	done
	fi
	done
	}