| srcdir := @abs_top_srcdir@ |
| builddir := @abs_top_builddir@ |
| INSTALL_DIR := @prefix@ |
| |
| GCC_SRCDIR := @with_gcc_src@ |
| BINUTILS_SRCDIR := @with_binutils_src@ |
| NEWLIB_SRCDIR := @with_newlib_src@ |
| GLIBC_SRCDIR := @with_glibc_src@ |
| MUSL_SRCDIR := @with_musl_src@ |
| LINUX_HEADERS_SRCDIR := @with_linux_headers_src@ |
| GDB_SRCDIR := @with_gdb_src@ |
| QEMU_SRCDIR := @with_qemu_src@ |
| SPIKE_SRCDIR := @with_spike_src@ |
| PK_SRCDIR := @with_pk_src@ |
| LLVM_SRCDIR := @with_llvm_src@ |
| DEJAGNU_SRCDIR := @with_dejagnu_src@ |
| DEBUG_INFO := @debug_info@ |
| DEJAGNU_SRCDIR := @with_dejagnu_src@ |
| |
| SIM ?= @WITH_SIM@ |
| |
| ifeq ($(srcdir)/gcc,$(GCC_SRCDIR)) |
| # We need a relative source dir for the gcc configure, to make msys2 mingw64 |
| # builds work. Mayberelsrcdir is relative if a relative path was used to run |
| # configure, otherwise absolute, so we have to check. |
| mayberelsrcdir := @top_srcdir@ |
| gccsrcdir := $(shell case $(mayberelsrcdir) in \ |
| ([\\/]* | ?:[\\/]*) echo $(mayberelsrcdir)/gcc ;; \ |
| (*) echo ../$(mayberelsrcdir)/gcc ;; \ |
| esac) |
| else |
| gccsrcdir := $(abspath $(GCC_SRCDIR)) |
| endif |
| |
| WITH_ARCH ?= @WITH_ARCH@ |
| WITH_ABI ?= @WITH_ABI@ |
| WITH_TUNE ?= @WITH_TUNE@ |
| WITH_ISA_SPEC ?= @WITH_ISA_SPEC@ |
| SYSROOT := $(INSTALL_DIR)/sysroot |
| ENABLE_LIBSANITIZER ?= @enable_libsanitizer@ |
| QEMU_TARGETS ?= @qemu_targets@ |
| |
| SHELL := /bin/sh |
| AWK := @GAWK@ |
| SED := @GSED@ |
| PATH := $(INSTALL_DIR)/bin:$(PATH) |
| |
| # Check to see if we need wrapper scripts for awk/sed (which point to |
| # gawk/gsed on platforms where these aren't the default), otherwise |
| # don't override these as the wrappers don't always work. |
| ifneq (@GSED@,/bin/sed) |
| PATH := $(builddir)/scripts/wrapper/sed:$(PATH) |
| endif |
| ifneq (@GAWK@,/usr/bin/gawk) |
| PATH := $(builddir)/scripts/wrapper/awk:$(PATH) |
| endif |
| |
| export PATH AWK SED |
| |
| MULTILIB_FLAGS := @multilib_flags@ |
| MULTILIB_GEN := @multilib_gen@ |
| ifeq ($(MULTILIB_GEN),) |
| NEWLIB_MULTILIB_NAMES := @newlib_multilib_names@ |
| GCC_MULTILIB_FLAGS := $(MULTILIB_FLAGS) |
| else |
| NEWLIB_MULTILIB_NAMES := $(shell echo "$(MULTILIB_GEN)" | $(SED) 's/;/\n/g' | $(SED) '/^$$/d' | $(AWK) '{split($$0,a,"-"); printf "%s-%s ", a[1],a[2]}') |
| GCC_MULTILIB_FLAGS := $(MULTILIB_FLAGS) --with-multilib-generator="$(MULTILIB_GEN)" |
| endif |
| GLIBC_MULTILIB_NAMES := @glibc_multilib_names@ |
| GCC_CHECKING_FLAGS := @gcc_checking@ |
| |
| EXTRA_MULTILIB_TEST := @extra_multilib_test@ |
| |
| XLEN := $(shell echo $(WITH_ARCH) | tr A-Z a-z | sed 's/.*rv\([0-9]*\).*/\1/') |
| ifneq ($(XLEN),32) |
| XLEN := 64 |
| endif |
| |
| make_tuple = riscv$(1)-unknown-$(2) |
| LINUX_TUPLE ?= $(call make_tuple,$(XLEN),linux-gnu) |
| NEWLIB_TUPLE ?= $(call make_tuple,$(XLEN),elf) |
| MUSL_TUPLE ?= $(call make_tuple,$(XLEN),linux-musl) |
| |
| CFLAGS_FOR_TARGET := $(CFLAGS_FOR_TARGET_EXTRA) $(DEBUG_INFO) @target_cflags@ @cmodel@ |
| CXXFLAGS_FOR_TARGET := $(CXXFLAGS_FOR_TARGET_EXTRA) $(DEBUG_INFO) @target_cxxflags@ @cmodel@ |
| ASFLAGS_FOR_TARGET := $(ASFLAGS_FOR_TARGET_EXTRA) $(DEBUG_INFO) @cmodel@ |
| # --with-expat is required to enable XML support used by OpenOCD. |
| BINUTILS_TARGET_FLAGS := --with-expat=yes $(BINUTILS_TARGET_FLAGS_EXTRA) |
| BINUTILS_NATIVE_FLAGS := $(BINUTILS_NATIVE_FLAGS_EXTRA) |
| GDB_TARGET_FLAGS := --with-expat=yes $(GDB_TARGET_FLAGS_EXTRA) |
| GDB_NATIVE_FLAGS := $(GDB_NATIVE_FLAGS_EXTRA) |
| |
| GLIBC_TARGET_FLAGS := $(GLIBC_TARGET_FLAGS_EXTRA) |
| GLIBC_CC_FOR_TARGET ?= $(LINUX_TUPLE)-gcc |
| GLIBC_CXX_FOR_TARGET ?= $(LINUX_TUPLE)-g++ |
| GLIBC_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ |
| --sim-name riscv-sim \ |
| --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ |
| --build-arch-abi $(GLIBC_MULTILIB_NAMES) \ |
| --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") |
| |
| NEWLIB_CC_FOR_TARGET ?= $(NEWLIB_TUPLE)-gcc |
| NEWLIB_CXX_FOR_TARGET ?= $(NEWLIB_TUPLE)-g++ |
| NEWLIB_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ |
| --sim-name riscv-sim \ |
| --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ |
| --build-arch-abi $(NEWLIB_MULTILIB_NAMES) \ |
| --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") |
| |
| NEWLIB_NANO_TARGET_BOARDS ?= $(shell $(srcdir)/scripts/generate_target_board \ |
| --sim-name riscv-sim-nano \ |
| --cmodel $(shell echo @cmodel@ | cut -d '=' -f2) \ |
| --build-arch-abi $(NEWLIB_MULTILIB_NAMES) \ |
| --extra-test-arch-abi-flags-list "$(EXTRA_MULTILIB_TEST)") |
| NEWLIB_CC_FOR_MULTILIB_INFO := $(NEWLIB_CC_FOR_TARGET) |
| |
| MUSL_TARGET_FLAGS := $(MUSL_TARGET_FLAGS_EXTRA) |
| MUSL_CC_FOR_TARGET ?= $(MUSL_TUPLE)-gcc |
| MUSL_CXX_FOR_TARGET ?= $(MUSL_TUPLE)-g++ |
| |
| CONFIGURE_HOST = @configure_host@ |
| |
| all: @default_target@ |
| newlib: stamps/build-gcc-newlib-stage2 |
| linux: stamps/build-gcc-linux-stage2 |
| ifneq (,$(findstring riscv32,$(MUSL_TUPLE))) |
| .PHONY: musl |
| musl: |
| @echo "musl only supports 64bit builds." && exit 1 |
| else |
| musl: stamps/build-gcc-musl-stage2 |
| endif |
| ifeq (@enable_gdb@,--enable-gdb) |
| newlib: stamps/build-gdb-newlib |
| linux: stamps/build-gdb-linux |
| endif |
| linux-native: stamps/build-gcc-linux-native |
| ifeq (@enable_llvm@,--enable-llvm) |
| all: stamps/build-llvm-@default_target@ |
| newlib: stamps/build-llvm-newlib |
| linux: stamps/build-llvm-linux |
| ifeq (@multilib_flags@,--enable-multilib) |
| $(error "Setting multilib flags for LLVM builds is not supported.") |
| endif |
| endif |
| |
| .PHONY: build-binutils build-gdb build-gcc1 build-libc build-gcc2 build-qemu build-llvm |
| build-binutils: stamps/build-binutils-@default_target@ |
| build-gdb: stamps/build-gdb-@default_target@ |
| build-gcc%: stamps/build-gcc-@default_target@-stage% |
| ifeq (@default_target@,linux) |
| build-libc: $(addprefix stamps/build-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) |
| else |
| build-libc: stamps/build-newlib stamps/build-newlib-nano \ |
| stamps/merge-newlib-nano |
| endif |
| build-qemu: stamps/build-qemu |
| build-llvm: stamps/build-llvm-@default_target@ |
| |
| REGRESSION_TEST_LIST = gcc |
| |
| .PHONY: check |
| check: check-@default_target@ |
| .PHONY: check-linux check-newlib |
| check-linux: $(patsubst %,check-%-linux,$(REGRESSION_TEST_LIST)) |
| check-newlib: $(patsubst %,check-%-newlib,$(REGRESSION_TEST_LIST)) |
| check-newlib-nano: $(patsubst %,check-%-newlib-nano,$(REGRESSION_TEST_LIST)) |
| .PHONY: check-gcc check-gcc-linux check-gcc-newlib check-gcc-newlib-nano |
| check-gcc: check-gcc-@default_target@ |
| check-gcc-linux: stamps/check-gcc-linux |
| check-gcc-newlib: stamps/check-gcc-newlib |
| check-gcc-newlib-nano: stamps/check-gcc-newlib-nano |
| .PHONY: check-glibc-linux |
| check-glibc-linux: $(addprefix stamps/check-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) |
| .PHONY: check-dhrystone check-dhrystone-linux check-dhrystone-newlib |
| check-dhrystone: check-dhrystone-@default_target@ |
| .PHONY: check-binutils check-binutils-linux check-binutils-newlib |
| check-binutils: check-binutils-@default_target@ |
| check-binutils-linux: stamps/check-binutils-linux |
| check-binutils-newlib: stamps/check-binutils-newlib |
| check-binutils-newlib-nano: stamps/check-binutils-newlib-nano |
| .PHONY: check-gdb check-gdb-linux check-gdb-newlib |
| check-gdb: check-gdb-@default_target@ |
| check-gdb-linux: stamps/check-gdb-linux |
| check-gdb-newlib: stamps/check-gdb-newlib |
| check-gdb-newlib-nano: stamps/check-gdb-newlib-nano |
| |
| .PHONY: report |
| report: report-@default_target@ |
| .PHONY: report-linux report-newlib report-newlib-nano |
| report-linux: $(patsubst %,report-%-linux,$(REGRESSION_TEST_LIST)) |
| report-newlib: $(patsubst %,report-%-newlib,$(REGRESSION_TEST_LIST)) |
| report-newlib-nano: $(patsubst %,report-%-newlib-nano,$(REGRESSION_TEST_LIST)) |
| .PHONY: report-gcc |
| report-gcc: report-gcc-@default_target@ |
| .PHONY: report-dhrystone |
| report-dhrystone: report-dhrystone-@default_target@ |
| .PHONY: report-binutils |
| report-binutils: report-binutils-@default_target@ |
| .PHONY: report-gdb |
| report-gdb: report-gdb-@default_target@ |
| |
| .PHONY: build-sim |
| ifeq ($(SIM),qemu) |
| SIM_PATH:=$(srcdir)/scripts/wrapper/qemu:$(srcdir)/scripts |
| SIM_PREPARE:=PATH="$(SIM_PATH):$(INSTALL_DIR)/bin:$(PATH)" RISC_V_SYSROOT="$(SYSROOT)" |
| SIM_STAMP:= stamps/build-qemu |
| else |
| ifeq ($(SIM),spike) |
| # Using spike simulator. |
| SIM_PATH:=$(srcdir)/scripts/wrapper/spike:$(srcdir)/scripts |
| SIM_PREPARE:=PATH="$(SIM_PATH):$(INSTALL_DIR)/bin:$(PATH)" PK_PATH="$(INSTALL_DIR)/$(NEWLIB_TUPLE)/bin/" ARCH_STR="$(WITH_ARCH)" |
| SIM_STAMP:= stamps/build-spike |
| ifneq (,$(findstring rv32,$(NEWLIB_MULTILIB_NAMES))) |
| SIM_STAMP+= stamps/build-pk32 |
| endif |
| ifneq (,$(findstring rv64,$(NEWLIB_MULTILIB_NAMES))) |
| SIM_STAMP+= stamps/build-pk64 |
| endif |
| else |
| ifeq ($(SIM),gdb) |
| # Using gdb simulator. |
| SIM_PATH:=$(INSTALL_DIR)/bin |
| SIM_PREPARE:= |
| else |
| $(error "Only support SIM=spike, SIM=gdb or SIM=qemu (default).") |
| endif |
| endif |
| endif |
| |
| build-sim: $(SIM_STAMP) |
| |
| stamps/check-write-permission: |
| mkdir -p $(INSTALL_DIR)/.test || \ |
| (echo "Sorry, you don't have permission to write to" \ |
| "'$(INSTALL_DIR)'. Please make sure that the location is " \ |
| "writable or use --prefix to specify another destination.'" \ |
| && exit 1) |
| rm -r $(INSTALL_DIR)/.test |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-linux-headers: |
| mkdir -p $(SYSROOT)/usr/ |
| ifdef LINUX_HEADERS_SRCDIR |
| cp -a $(LINUX_HEADERS_SRCDIR) $(SYSROOT)/usr/ |
| else |
| cp -a $(srcdir)/linux-headers/include $(SYSROOT)/usr/ |
| endif |
| mkdir -p $(dir $@) && touch $@ |
| |
| # |
| # Rule for auto init submodules |
| # |
| |
| ifeq ($(findstring $(srcdir),$(GCC_SRCDIR)),$(srcdir)) |
| GCC_SRC_GIT := $(GCC_SRCDIR)/.git |
| else |
| GCC_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(BINUTILS_SRCDIR)),$(srcdir)) |
| BINUTILS_SRC_GIT := $(BINUTILS_SRCDIR)/.git |
| else |
| BINUTILS_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(GDB_SRCDIR)),$(srcdir)) |
| GDB_SRC_GIT := $(GDB_SRCDIR)/.git |
| else |
| GDB_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(NEWLIB_SRCDIR)),$(srcdir)) |
| NEWLIB_SRC_GIT := $(NEWLIB_SRCDIR)/.git |
| else |
| NEWLIB_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(GLIBC_SRCDIR)),$(srcdir)) |
| GLIBC_SRC_GIT := $(GLIBC_SRCDIR)/.git |
| else |
| GLIBC_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(MUSL_SRCDIR)),$(srcdir)) |
| MUSL_SRC_GIT := $(MUSL_SRCDIR)/.git |
| else |
| MUSL_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(QEMU_SRCDIR)),$(srcdir)) |
| QEMU_SRC_GIT := $(QEMU_SRCDIR)/.git |
| else |
| QEMU_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(SPIKE_SRCDIR)),$(srcdir)) |
| SPIKE_SRC_GIT := $(SPIKE_SRCDIR)/.git |
| PK_SRC_GIT := $(PK_SRCDIR)/.git |
| else |
| SPIKE_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(LLVM_SRCDIR)),$(srcdir)) |
| LLVM_SRC_GIT := $(LLVM_SRCDIR)/.git |
| else |
| LLVM_SRC_GIT := |
| endif |
| |
| ifeq ($(findstring $(srcdir),$(DEJAGNU_SRCDIR)),$(srcdir)) |
| DEJAGNU_SRC_GIT := $(DEJAGNU_SRCDIR)/.git |
| else |
| DEJAGNU_SRC_GIT := |
| endif |
| |
| ifneq ("$(wildcard $(GCC_SRCDIR)/.git)","") |
| GCCPKGVER := g$(shell git -C $(GCC_SRCDIR) describe --always --dirty --exclude '*') |
| else |
| GCCPKGVER := |
| endif |
| |
| $(srcdir)/%/.git: |
| cd $(srcdir) && \ |
| flock `git rev-parse --git-dir`/config git submodule init $(dir $@) && \ |
| flock `git rev-parse --git-dir`/config git submodule update $(dir $@) |
| |
| # |
| # GLIBC |
| # |
| |
| stamps/build-binutils-linux: $(BINUTILS_SRCDIR) $(BINUTILS_SRC_GIT) stamps/check-write-permission |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # CC_FOR_TARGET is required for the ld testsuite. |
| cd $(notdir $@) && CC_FOR_TARGET=$(GLIBC_CC_FOR_TARGET) $</configure \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| $(MULTILIB_FLAGS) \ |
| @with_guile@ \ |
| --disable-werror \ |
| --disable-nls \ |
| $(BINUTILS_TARGET_FLAGS) \ |
| --disable-gdb \ |
| --disable-sim \ |
| --disable-libdecnumber \ |
| --disable-readline \ |
| $(WITH_ISA_SPEC) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gdb-linux: $(GDB_SRCDIR) $(GDB_SRC_GIT) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # CC_FOR_TARGET is required for the ld testsuite. |
| cd $(notdir $@) && CC_FOR_TARGET=$(GLIBC_CC_FOR_TARGET) $</configure \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| $(MULTILIB_FLAGS) \ |
| @with_guile@ \ |
| --disable-werror \ |
| --disable-nls \ |
| $(GDB_TARGET_FLAGS) \ |
| --enable-gdb \ |
| --disable-gas \ |
| --disable-binutils \ |
| --disable-ld \ |
| --disable-gold \ |
| --disable-gprof |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-glibc-linux-headers: $(GLIBC_SRCDIR) $(GLIBC_SRC_GIT) stamps/build-gcc-linux-stage1 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && CC="$(GLIBC_CC_FOR_TARGET)" $</configure \ |
| --host=$(LINUX_TUPLE) \ |
| --prefix=$(SYSROOT)/usr \ |
| --enable-shared \ |
| --with-headers=$(LINUX_HEADERS_SRCDIR) \ |
| --disable-multilib \ |
| --enable-kernel=3.0.0 |
| $(MAKE) -C $(notdir $@) install-headers |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-glibc-linux-%: $(GLIBC_SRCDIR) $(GLIBC_SRC_GIT) stamps/build-gcc-linux-stage1 |
| ifeq ($(MULTILIB_FLAGS),--enable-multilib) |
| $(eval $@_ARCH := $(word 4,$(subst -, ,$@))) |
| $(eval $@_ABI := $(word 5,$(subst -, ,$@))) |
| else |
| $(eval $@_ARCH := ) |
| $(eval $@_ABI := ) |
| endif |
| $(eval $@_LIBDIRSUFFIX := $(if $($@_ABI),$(shell echo $($@_ARCH) | sed 's/.*rv\([0-9]*\).*/\1/')/$($@_ABI),)) |
| $(eval $@_XLEN := $(if $($@_ABI),$(shell echo $($@_ARCH) | sed 's/.*rv\([0-9]*\).*/\1/'),$(XLEN))) |
| $(eval $@_CFLAGS := $(if $($@_ABI),-march=$($@_ARCH) -mabi=$($@_ABI),)) |
| $(eval $@_LIBDIROPTS := $(if $@_LIBDIRSUFFIX,--libdir=/usr/lib$($@_LIBDIRSUFFIX) libc_cv_slibdir=/lib$($@_LIBDIRSUFFIX) libc_cv_rtlddir=/lib,)) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && \ |
| CC="$(GLIBC_CC_FOR_TARGET) $($@_CFLAGS)" \ |
| CXX="this-is-not-the-compiler-youre-looking-for" \ |
| CFLAGS="$(CFLAGS_FOR_TARGET) -O2 $($@_CFLAGS)" \ |
| CXXFLAGS="$(CXXFLAGS_FOR_TARGET) -O2 $($@_CFLAGS)" \ |
| ASFLAGS="$(ASFLAGS_FOR_TARGET) $($@_CFLAGS)" \ |
| $</configure \ |
| --host=$(call make_tuple,$($@_XLEN),linux-gnu) \ |
| --prefix=/usr \ |
| --disable-werror \ |
| --enable-shared \ |
| --enable-obsolete-rpc \ |
| --with-headers=$(LINUX_HEADERS_SRCDIR) \ |
| $(MULTILIB_FLAGS) \ |
| --enable-kernel=3.0.0 \ |
| $(GLIBC_TARGET_FLAGS) \ |
| $($@_LIBDIROPTS) |
| $(MAKE) -C $(notdir $@) |
| +flock $(SYSROOT)/.lock $(MAKE) -C $(notdir $@) install install_root=$(SYSROOT) |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-linux-stage1: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-binutils-linux \ |
| stamps/build-linux-headers |
| if test -f $</contrib/download_prerequisites && test "@NEED_GCC_EXTERNAL_LIBRARIES@" = "true"; then cd $< && ./contrib/download_prerequisites; fi |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| --with-newlib \ |
| --without-headers \ |
| --disable-shared \ |
| --disable-threads \ |
| @with_system_zlib@ \ |
| --enable-tls \ |
| --enable-languages=c \ |
| --disable-libatomic \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-libgomp \ |
| --disable-nls \ |
| --disable-bootstrap \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| $(MULTILIB_FLAGS) \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-O2 $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-O2 $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) inhibit-libc=true all-gcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true install-gcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true all-target-libgcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true install-target-libgcc |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-linux-stage2: $(GCC_SRCDIR) $(GCC_SRC_GIT) $(addprefix stamps/build-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) \ |
| stamps/build-glibc-linux-headers |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| --with-pkgversion="$(GCCPKGVER)" \ |
| @with_system_zlib@ \ |
| --enable-shared \ |
| --enable-tls \ |
| --enable-languages=c,c++,fortran \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| $(ENABLE_LIBSANITIZER) \ |
| --disable-nls \ |
| --disable-bootstrap \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| $(MULTILIB_FLAGS) \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-O2 $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-O2 $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| cp -a $(INSTALL_DIR)/$(LINUX_TUPLE)/lib* $(SYSROOT) |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-binutils-linux-native: $(BINUTILS_SRCDIR) $(BINUTILS_SRC_GIT) stamps/build-gcc-linux-stage2 stamps/check-write-permission |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --host=$(LINUX_TUPLE) \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR)/native \ |
| $(MULTILIB_FLAGS) \ |
| @with_guile@ \ |
| --disable-werror \ |
| --disable-nls \ |
| $(BINUTILS_NATIVE_FLAGS) \ |
| --disable-gdb \ |
| --disable-sim \ |
| --disable-libdecnumber \ |
| --disable-readline \ |
| $(WITH_ISA_SPEC) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-linux-native: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-gcc-linux-stage2 stamps/build-binutils-linux-native |
| if test -f $</contrib/download_prerequisites; then cd $< && ./contrib/download_prerequisites; fi |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --host=$(LINUX_TUPLE) \ |
| --target=$(LINUX_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR)/native \ |
| --without-system-zlib \ |
| --enable-shared \ |
| --enable-tls \ |
| --enable-languages=c,c++,fortran \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-nls \ |
| --disable-bootstrap \ |
| --with-native-system-header-dir=$(INSTALL_DIR)/native/include \ |
| $(GCC_CHECKING_FLAGS) \ |
| $(MULTILIB_FLAGS) \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| cp -a $(INSTALL_DIR)/$(LINUX_TUPLE)/lib* $(SYSROOT) |
| mkdir -p $(dir $@) && touch $@ |
| |
| # |
| # NEWLIB |
| # |
| |
| stamps/build-binutils-newlib: $(BINUTILS_SRCDIR) $(BINUTILS_SRC_GIT) stamps/check-write-permission |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # CC_FOR_TARGET is required for the ld testsuite. |
| cd $(notdir $@) && CC_FOR_TARGET=$(NEWLIB_CC_FOR_TARGET) $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| @with_guile@ \ |
| --disable-werror \ |
| $(BINUTILS_TARGET_FLAGS) \ |
| --disable-gdb \ |
| --disable-sim \ |
| --disable-libdecnumber \ |
| --disable-readline \ |
| $(WITH_ISA_SPEC) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gdb-newlib: $(GDB_SRCDIR) $(GDB_SRC_GIT) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # CC_FOR_TARGET is required for the ld testsuite. |
| cd $(notdir $@) && CC_FOR_TARGET=$(NEWLIB_CC_FOR_TARGET) $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| @with_guile@ \ |
| --disable-werror \ |
| $(GDB_TARGET_FLAGS) \ |
| --enable-gdb \ |
| --disable-gas \ |
| --disable-binutils \ |
| --disable-ld \ |
| --disable-gold \ |
| --disable-gprof |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-newlib-stage1: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-binutils-newlib |
| if test -f $</contrib/download_prerequisites && test "@NEED_GCC_EXTERNAL_LIBRARIES@" = "true"; then cd $< && ./contrib/download_prerequisites; fi |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --disable-shared \ |
| --disable-threads \ |
| --disable-tls \ |
| --enable-languages=c,c++ \ |
| @with_system_zlib@ \ |
| --with-newlib \ |
| --with-sysroot=$(INSTALL_DIR)/$(NEWLIB_TUPLE) \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-libgomp \ |
| --disable-nls \ |
| --disable-tm-clone-registry \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| $(GCC_MULTILIB_FLAGS) \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-Os $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-Os $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) all-gcc |
| $(MAKE) -C $(notdir $@) install-gcc |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-newlib: $(NEWLIB_SRCDIR) $(NEWLIB_SRC_GIT) stamps/build-gcc-newlib-stage1 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --enable-newlib-io-long-double \ |
| --enable-newlib-io-long-long \ |
| --enable-newlib-io-c99-formats \ |
| --enable-newlib-register-fini \ |
| CFLAGS_FOR_TARGET="-O2 -D_POSIX_MODE -ffunction-sections -fdata-sections $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-O2 -D_POSIX_MODE -ffunction-sections -fdata-sections $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-newlib-nano: $(NEWLIB_SRCDIR) $(NEWLIB_SRC_GIT) stamps/build-gcc-newlib-stage1 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(builddir)/install-newlib-nano \ |
| --enable-newlib-reent-small \ |
| --disable-newlib-fvwrite-in-streamio \ |
| --disable-newlib-fseek-optimization \ |
| --disable-newlib-wide-orient \ |
| --enable-newlib-nano-malloc \ |
| --disable-newlib-unbuf-stream-opt \ |
| --enable-lite-exit \ |
| --enable-newlib-global-atexit \ |
| --enable-newlib-nano-formatted-io \ |
| --disable-newlib-supplied-syscalls \ |
| --disable-nls \ |
| CFLAGS_FOR_TARGET="-Os -ffunction-sections -fdata-sections $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-Os -ffunction-sections -fdata-sections $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/merge-newlib-nano: stamps/build-newlib-nano stamps/build-newlib |
| # Copy nano library files into newlib install dir. |
| if [ -f $(INSTALL_DIR)/bin/$(NEWLIB_TUPLE)-gcc ] ; then \ |
| export NEWLIB_CC_FOR_MULTILIB_INFO="$(INSTALL_DIR)/bin/$(NEWLIB_TUPLE)-gcc"; \ |
| else \ |
| export NEWLIB_CC_FOR_MULTILIB_INFO="$(NEWLIB_CC_FOR_TARGET)"; \ |
| fi |
| set -e; \ |
| for ml in `${NEWLIB_CC_FOR_MULTILIB_INFO} --print-multi-lib`; \ |
| do \ |
| mld=`echo $${ml} | sed -e 's/;.*$$//'`; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/lib/$${mld}/libc.a \ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/lib/$${mld}/libc_nano.a; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/lib/$${mld}/libm.a \ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/lib/$${mld}/libm_nano.a; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/lib/$${mld}/libg.a \ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/lib/$${mld}/libg_nano.a; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/lib/$${mld}/libgloss.a\ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/lib/$${mld}/libgloss_nano.a; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/lib/$${mld}/crt0.o\ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/lib/$${mld}/crt0.o; \ |
| done |
| # Copy nano header files into newlib install dir. |
| mkdir -p $(INSTALL_DIR)/$(NEWLIB_TUPLE)/include/newlib-nano; \ |
| cp $(builddir)/install-newlib-nano/$(NEWLIB_TUPLE)/include/newlib.h \ |
| $(INSTALL_DIR)/$(NEWLIB_TUPLE)/include/newlib-nano/newlib.h; \ |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-newlib-stage2: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-newlib \ |
| stamps/merge-newlib-nano |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(NEWLIB_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --disable-shared \ |
| --disable-threads \ |
| --enable-languages=c,c++ \ |
| --with-pkgversion="$(GCCPKGVER)" \ |
| @with_system_zlib@ \ |
| --enable-tls \ |
| --with-newlib \ |
| --with-sysroot=$(INSTALL_DIR)/$(NEWLIB_TUPLE) \ |
| --with-native-system-header-dir=/include \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-libgomp \ |
| --disable-nls \ |
| --disable-tm-clone-registry \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| $(GCC_MULTILIB_FLAGS) \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-Os $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-Os $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| # |
| # MUSL |
| # |
| |
| stamps/build-binutils-musl: $(BINUTILS_SRCDIR) $(BINUTILS_SRC_GIT) stamps/check-write-permission |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # CC_FOR_TARGET is required for the ld testsuite. |
| cd $(notdir $@) && CC_FOR_TARGET=$(MUSL_CC_FOR_TARGET) $</configure \ |
| --target=$(MUSL_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| $(MULTILIB_FLAGS) \ |
| @with_guile@ \ |
| --disable-werror \ |
| --disable-nls \ |
| $(BINUTILS_TARGET_FLAGS) \ |
| --disable-gdb \ |
| --disable-sim \ |
| --disable-libdecnumber \ |
| --disable-readline \ |
| $(WITH_ISA_SPEC) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-musl-stage1: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-binutils-musl \ |
| stamps/build-linux-headers |
| if test -f $</contrib/download_prerequisites && test "@NEED_GCC_EXTERNAL_LIBRARIES@" = "true"; then cd $< && ./contrib/download_prerequisites; fi |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --target=$(MUSL_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --without-headers \ |
| --disable-shared \ |
| --disable-threads \ |
| @with_system_zlib@ \ |
| --enable-tls \ |
| --enable-languages=c \ |
| --disable-libatomic \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-libgomp \ |
| --disable-nls \ |
| --disable-bootstrap \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| --disable-multilib \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-O2 $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-O2 $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) inhibit-libc=true all-gcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true install-gcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true all-target-libgcc |
| $(MAKE) -C $(notdir $@) inhibit-libc=true install-target-libgcc |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-musl-linux-headers: $(MUSL_SRCDIR) $(MUSL_SRC_GIT) stamps/build-gcc-musl-stage1 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && CC="$(MUSL_CC_FOR_TARGET)" $</configure \ |
| --host=$(MUSL_TUPLE) \ |
| --prefix=$(SYSROOT)/usr \ |
| --enable-shared \ |
| --with-headers=$(LINUX_HEADERS_SRCDIR) \ |
| --disable-multilib \ |
| --enable-kernel=3.0.0 |
| $(MAKE) -C $(notdir $@) install-headers |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-musl-linux: $(MUSL_SRCDIR) $(MUSL_SRC_GIT) stamps/build-gcc-musl-stage1 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && \ |
| CC="$(MUSL_CC_FOR_TARGET) $($@_CFLAGS)" \ |
| CXX="$(MUSL_CXX_FOR_TARGET) $($@_CFLAGS)" \ |
| CFLAGS="$(CFLAGS_FOR_TARGET) -O2 $($@_CFLAGS)" \ |
| CXXFLAGS="$(CXXFLAGS_FOR_TARGET) -O2 $($@_CFLAGS)" \ |
| ASFLAGS="$(ASFLAGS_FOR_TARGET) $($@_CFLAGS)" \ |
| $</configure \ |
| --host=$(MUSL_TUPLE) \ |
| --prefix=$(SYSROOT) \ |
| --disable-werror \ |
| --enable-shared \ |
| $(MUSL_TARGET_FLAGS) |
| $(MAKE) -C $(notdir $@) |
| +flock $(SYSROOT)/.lock $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-gcc-musl-stage2: $(GCC_SRCDIR) $(GCC_SRC_GIT) stamps/build-musl-linux \ |
| stamps/build-musl-linux-headers |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| # Disable libsanitizer for now |
| # https://github.com/google/sanitizers/issues/1080 |
| cd $(notdir $@) && $</configure \ |
| --target=$(MUSL_TUPLE) \ |
| $(CONFIGURE_HOST) \ |
| --prefix=$(INSTALL_DIR) \ |
| --with-sysroot=$(SYSROOT) \ |
| @with_system_zlib@ \ |
| --enable-shared \ |
| --enable-tls \ |
| --enable-languages=c,c++ \ |
| --disable-libmudflap \ |
| --disable-libssp \ |
| --disable-libquadmath \ |
| --disable-libsanitizer \ |
| --disable-nls \ |
| --disable-bootstrap \ |
| --src=$(gccsrcdir) \ |
| $(GCC_CHECKING_FLAGS) \ |
| --disable-multilib \ |
| $(WITH_ABI) \ |
| $(WITH_ARCH) \ |
| $(WITH_TUNE) \ |
| $(WITH_ISA_SPEC) \ |
| $(GCC_EXTRA_CONFIGURE_FLAGS) \ |
| CFLAGS_FOR_TARGET="-O2 $(CFLAGS_FOR_TARGET)" \ |
| CXXFLAGS_FOR_TARGET="-O2 $(CXXFLAGS_FOR_TARGET)" |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| cp -a $(INSTALL_DIR)/$(MUSL_TUPLE)/lib* $(SYSROOT) |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-spike: $(SPIKE_SRCDIR) $(SPIKE_SRC_GIT) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --prefix=$(INSTALL_DIR) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/build-pk32: $(PK_SRCDIR) $(PK_SRC_GIT) stamps/build-gcc-newlib-stage2 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --prefix=$(INSTALL_DIR) \ |
| --host=$(NEWLIB_TUPLE) \ |
| --with-arch=rv32gc \ |
| --with-abi=ilp32f |
| $(MAKE) -C $(notdir $@) |
| cp $(notdir $@)/pk $(INSTALL_DIR)/$(NEWLIB_TUPLE)/bin/pk32 |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/build-pk64: $(PK_SRCDIR) $(PK_SRC_GIT) stamps/build-gcc-newlib-stage2 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --prefix=$(INSTALL_DIR) \ |
| --host=$(NEWLIB_TUPLE) \ |
| --with-arch=rv64gc \ |
| --with-abi=lp64d |
| $(MAKE) -C $(notdir $@) |
| cp $(notdir $@)/pk $(INSTALL_DIR)/$(NEWLIB_TUPLE)/bin/pk64 |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/build-qemu: $(QEMU_SRCDIR) $(QEMU_SRC_GIT) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --prefix=$(INSTALL_DIR) \ |
| --target-list=$(QEMU_TARGETS) \ |
| --interp-prefix=$(INSTALL_DIR)/sysroot \ |
| --python=python3 |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/build-llvm-linux: $(LLVM_SRCDIR) $(LLVM_SRC_GIT) \ |
| stamps/build-gcc-linux-stage2 |
| # We have the following situation: |
| # - sysroot directory: $(INSTALL_DIR)/sysroot |
| # - GCC install directory: $(INSTALL_DIR) |
| # However, LLVM does not allow to set a GCC install prefix |
| # (-DGCC_INSTALL_PREFIX) if a sysroot (-DDEFAULT_SYSROOT) is set |
| # (the GCC install prefix will be ignored silently). |
| # Without a proper sysroot path feature.h won't be found by clang. |
| # Without a proper GCC install directory libgcc won't be found. |
| # As a workaround we have to merge both paths: |
| mkdir -p $(SYSROOT)/lib/ |
| ln -s -f $(INSTALL_DIR)/lib/gcc $(SYSROOT)/lib/gcc |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && ln -f -s $(SYSROOT) sysroot |
| cd $(notdir $@) && \ |
| cmake $(LLVM_SRCDIR)/llvm \ |
| -DCMAKE_INSTALL_PREFIX=$(INSTALL_DIR) \ |
| -DCMAKE_BUILD_TYPE=Release \ |
| -DLLVM_TARGETS_TO_BUILD="RISCV" \ |
| -DLLVM_ENABLE_PROJECTS="clang;lld" \ |
| -DLLVM_ENABLE_RUNTIMES="compiler-rt;libcxx;libcxxabi;libunwind" \ |
| -DLLVM_DEFAULT_TARGET_TRIPLE="$(LINUX_TUPLE)" \ |
| -DDEFAULT_SYSROOT="../sysroot" \ |
| -DLLVM_RUNTIME_TARGETS=$(call make_tuple,$(XLEN),linux-gnu) \ |
| -DLLVM_INSTALL_TOOLCHAIN_ONLY=On \ |
| -DLLVM_PARALLEL_LINK_JOBS=4 |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| cp $(notdir $@)/lib/riscv$(XLEN)-unknown-linux-gnu/libc++* $(SYSROOT)/lib |
| cd $(INSTALL_DIR)/bin && ln -s -f clang $(LINUX_TUPLE)-clang && ln -s -f clang++ $(LINUX_TUPLE)-clang++ |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-llvm-newlib: $(LLVM_SRCDIR) $(LLVM_SRC_GIT) stamps/build-gcc-newlib-stage2 |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && \ |
| cmake $(LLVM_SRCDIR)/llvm \ |
| -DCMAKE_INSTALL_PREFIX=$(INSTALL_DIR) \ |
| -DCMAKE_BUILD_TYPE=Release \ |
| -DLLVM_TARGETS_TO_BUILD="RISCV" \ |
| -DLLVM_ENABLE_PROJECTS="clang;lld" \ |
| -DLLVM_DEFAULT_TARGET_TRIPLE="$(NEWLIB_TUPLE)" \ |
| -DLLVM_INSTALL_TOOLCHAIN_ONLY=On \ |
| -DLLVM_PARALLEL_LINK_JOBS=4 |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| cd $(INSTALL_DIR)/bin && ln -s -f clang $(NEWLIB_TUPLE)-clang && \ |
| ln -s -f clang++ $(NEWLIB_TUPLE)-clang++ |
| mkdir -p $(dir $@) && touch $@ |
| |
| stamps/build-dejagnu: $(DEJAGNU_SRCDIR) $(DEJAGNU_SRC_GIT) |
| rm -rf $@ $(notdir $@) |
| mkdir $(notdir $@) |
| cd $(notdir $@) && $</configure \ |
| --prefix=$(INSTALL_DIR) |
| $(MAKE) -C $(notdir $@) |
| $(MAKE) -C $(notdir $@) install |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/check-gcc-newlib: stamps/build-gcc-newlib-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gcc-newlib-stage2 check-gcc "RUNTESTFLAGS=$(RUNTESTFLAGS) --target_board='$(NEWLIB_TARGET_BOARDS)'" |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/check-gcc-newlib-nano: stamps/build-gcc-newlib-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gcc-newlib-stage2 check-gcc "RUNTESTFLAGS=$(RUNTESTFLAGS) --target_board='$(NEWLIB_NANO_TARGET_BOARDS)'" |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/check-gcc-linux: stamps/build-gcc-linux-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gcc-linux-stage2 check-gcc "RUNTESTFLAGS=$(RUNTESTFLAGS) --target_board='$(GLIBC_TARGET_BOARDS)'" |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| stamps/check-glibc-linux-%: stamps/build-gcc-linux-stage2 $(SIM_STAMP) stamps/build-dejagnu \ |
| $(addprefix stamps/build-glibc-linux-,$(GLIBC_MULTILIB_NAMES)) |
| $(eval $@_BUILD_DIR := $(notdir $@)) |
| $(eval $@_BUILD_DIR := $(subst check-,build-,$($@_BUILD_DIR))) |
| $(SIM_PREPARE) $(MAKE) -C $($@_BUILD_DIR) check |
| mkdir -p $(dir $@) |
| date > $@ |
| |
| .PHONY: check-dhrystone-newlib check-dhrystone-newlib-nano |
| check-dhrystone-newlib: $(patsubst %,stamps/check-dhrystone-newlib-%,$(NEWLIB_MULTILIB_NAMES)) |
| check-dhrystone-newlib-nano: $(patsubst %,stamps/check-dhrystone-newlib-nano-%,$(NEWLIB_MULTILIB_NAMES)) |
| |
| stamps/check-dhrystone-newlib-%: \ |
| stamps/build-gcc-newlib-stage2 \ |
| $(SIM_STAMP) \ |
| $(wildcard $(srcdir)/test/benchmarks/dhrystone/*) |
| $(eval $@_ARCH := $(word 4,$(subst -, ,$@))) |
| $(eval $@_ABI := $(word 5,$(subst -, ,$@))) |
| $(eval $@_XLEN := $(patsubst rv32%,32,$(patsubst rv64%,64,$($@_ARCH)))) |
| $(SIM_PREPARE) $(srcdir)/test/benchmarks/dhrystone/check -march=$($@_ARCH) -mabi=$($@_ABI) -cc=riscv$(XLEN)-unknown-elf-gcc -objdump=riscv$(XLEN)-unknown-elf-objdump -sim=riscv$($@_XLEN)-unknown-elf-run -out=$@ $(filter %.c,$^) || true |
| |
| stamps/check-dhrystone-newlib-nano-%: \ |
| stamps/build-gcc-newlib-stage2 \ |
| $(SIM_STAMP) \ |
| $(wildcard $(srcdir)/test/benchmarks/dhrystone/*) |
| $(eval $@_ARCH := $(word 5,$(subst -, ,$@))) |
| $(eval $@_ABI := $(word 6,$(subst -, ,$@))) |
| $(eval $@_XLEN := $(patsubst rv32%,32,$(patsubst rv64%,64,$($@_ARCH)))) |
| $(SIM_PREPARE) $(srcdir)/test/benchmarks/dhrystone/check -march=$($@_ARCH) -mabi=$($@_ABI) -specs=nano.specs -cc=riscv$(XLEN)-unknown-elf-gcc -objdump=riscv$(XLEN)-unknown-elf-objdump -sim=riscv$($@_XLEN)-unknown-elf-run -out=$@ $(filter %.c,$^) || true |
| |
| .PHONY: check-dhrystone-linux |
| check-dhrystone-linux: $(patsubst %,stamps/check-dhrystone-linux-%,$(GLIBC_MULTILIB_NAMES)) |
| |
| stamps/check-dhrystone-linux-%: \ |
| stamps/build-gcc-linux-stage2 \ |
| $(SIM_STAMP) \ |
| $(wildcard $(srcdir)/test/benchmarks/dhrystone/*) |
| $(eval $@_ARCH := $(word 4,$(subst -, ,$@))) |
| $(eval $@_ABI := $(word 5,$(subst -, ,$@))) |
| $(eval $@_XLEN := $(patsubst rv32%,32,$(patsubst rv64%,64,$($@_ARCH)))) |
| $(SIM_PREPARE) $(srcdir)/test/benchmarks/dhrystone/check -march=$($@_ARCH) -mabi=$($@_ABI) -cc=riscv$(XLEN)-unknown-elf-gcc -objdump=riscv$(XLEN)-unknown-elf-objdump -sim=riscv$($@_XLEN)-unknown-elf-run -out=$@ $(filter %.c,$^) || true |
| |
| stamps/check-binutils-newlib: stamps/build-gcc-newlib-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-binutils-newlib check-binutils check-gas check-ld -k "RUNTESTFLAGS=--target_board='$(NEWLIB_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| stamps/check-binutils-newlib-nano: stamps/build-gcc-newlib-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-binutils-newlib check-binutils check-gas check-ld -k "RUNTESTFLAGS=--target_board='$(NEWLIB_NANO_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| stamps/check-binutils-linux: stamps/build-gcc-linux-stage2 $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-binutils-linux check-binutils check-gas check-ld -k "RUNTESTFLAGS=--target_board='$(GLIBC_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| stamps/check-gdb-newlib: stamps/build-gcc-newlib-stage2 stamps/build-gdb-newlib $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gdb-newlib check-gdb -k "RUNTESTFLAGS=--target_board='$(NEWLIB_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| stamps/check-gdb-newlib-nano: stamps/build-gcc-newlib-stage2 stamps/build-gdb-newlib $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gdb-newlib check-gdb -k "RUNTESTFLAGS=--target_board='$(NEWLIB_NANO_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| stamps/check-gdb-linux: stamps/build-gcc-linux-stage2 stamps/build-gdb-linux $(SIM_STAMP) stamps/build-dejagnu |
| $(SIM_PREPARE) $(MAKE) -C build-gdb-linux check-gdb -k "RUNTESTFLAGS=--target_board='$(GLIBC_TARGET_BOARDS)'" || true |
| date > $@ |
| |
| .PHONY: report-gcc-newlib report-gcc-newlib-nano |
| report-gcc-newlib: stamps/check-gcc-newlib |
| $(srcdir)/scripts/testsuite-filter gcc newlib $(srcdir)/test/allowlist `find build-gcc-newlib-stage2/gcc/testsuite/ -name *.sum |paste -sd "," -` |
| |
| report-gcc-newlib-nano: stamps/check-gcc-newlib-nano |
| $(srcdir)/scripts/testsuite-filter gcc newlib-nano $(srcdir)/test/allowlist `find build-gcc-newlib-stage2/gcc/testsuite/ -name *.sum |paste -sd "," -` |
| |
| .PHONY: report-gcc-linux |
| report-gcc-linux: stamps/check-gcc-linux |
| $(srcdir)/scripts/testsuite-filter gcc glibc $(srcdir)/test/allowlist `find build-gcc-linux-stage2/gcc/testsuite/ -name *.sum |paste -sd "," -` |
| |
| .PHONY: report-dhrystone-newlib report-dhrystone-newlib-nano |
| report-dhrystone-newlib: $(patsubst %,stamps/check-dhrystone-newlib-%,$(NEWLIB_MULTILIB_NAMES)) |
| if cat $^ | grep -v '^PASS'; then false; else true; fi |
| report-dhrystone-newlib-nano: $(patsubst %,stamps/check-dhrystone-newlib-nano-%,$(NEWLIB_MULTILIB_NAMES)) |
| if cat $^ | grep -v '^PASS'; then false; else true; fi |
| |
| .PHONY: report-dhrystone-linux |
| report-dhrystone-linux: $(patsubst %,stamps/check-dhrystone-linux-%,$(GLIBC_MULTILIB_NAMES)) |
| if cat $^ | grep -v '^PASS'; then false; else true; fi |
| |
| .PHONY: report-binutils-newlib report-binutils-newlib-nano |
| report-binutils-newlib: stamps/check-binutils-newlib |
| $(srcdir)/scripts/testsuite-filter binutils newlib \ |
| $(srcdir)/test/allowlist \ |
| `find build-binutils-newlib/ -name *.sum |paste -sd "," -` |
| |
| report-binutils-newlib-nano: stamps/check-binutils-newlib-nano |
| $(srcdir)/scripts/testsuite-filter binutils newlib-nano \ |
| $(srcdir)/test/allowlist \ |
| `find build-binutils-newlib/ -name *.sum |paste -sd "," -` |
| |
| .PHONY: report-binutils-linux |
| report-binutils-linux: stamps/check-binutils-linux |
| $(srcdir)/scripts/testsuite-filter binutils glibc \ |
| $(srcdir)/test/allowlist \ |
| `find build-binutils-linux/ -name *.sum |paste -sd "," -` |
| |
| clean: |
| rm -rf build-* stamps install-newlib-nano |
| |
| .PHONY: report-gdb-newlib report-gdb-newlib-nano |
| report-gdb-newlib: stamps/check-gdb-newlib |
| stat $(patsubst %,$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)) || exit 1 |
| # Fail if there are blank lines in the log file used as input for grep below. |
| if grep '^$$' $(patsubst %,$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)); then exit 1; fi |
| if find build-gdb-newlib -iname '*.sum' | xargs grep ^FAIL | sort | grep -F -v $(patsubst %,--file=$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)); then false; else true; fi |
| |
| report-gdb-newlib-nano: stamps/check-gdb-newlib-nano |
| stat $(patsubst %,$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)) || exit 1 |
| # Fail if there are blank lines in the log file used as input for grep below. |
| if grep '^$$' $(patsubst %,$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)); then exit 1; fi |
| if find build-gdb-newlib -iname '*.sum' | xargs grep ^FAIL | sort | grep -F -v $(patsubst %,--file=$(srcdir)/test/gdb-newlib/%.log,$(NEWLIB_MULTILIB_NAMES)); then false; else true; fi |
| |
| .PHONY: report-gdb-linux |
| report-gdb-linux: stamps/check-gdb-linux |
| stat $(patsubst %,$(srcdir)/test/gdb-linux/%.log,$(GLIBC_MULTILIB_NAMES)) || exit 1 |
| # Fail if there are blank lines in the log file used as input for grep below. |
| if grep '^$$' $(patsubst %,$(srcdir)/test/gdb-linux/%.log,$(GLIBC_MULTILIB_NAMES)); then exit 1; fi |
| if find build-gdb-linux -iname '*.sum' | xargs grep ^FAIL | sort | grep -F -v $(patsubst %,--file=$(srcdir)/test/gdb-linux/%.log,$(GLIBC_MULTILIB_NAMES)); then false; else true; fi |
| |
| distclean: clean |
| rm -rf src |
| |
| # All of the packages install themselves, so our install target does nothing. |
| install: |
| |
| # Rebuilding Makefile. |
| Makefile: $(srcdir)/Makefile.in config.status |
| CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
| |
| config.status: $(srcdir)/configure |
| CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck |
