| //! This module provides a framework on top of the normal MIR dataflow framework to simplify the |
| //! implementation of analyses that track information about the values stored in certain places. |
| //! We are using the term "place" here to refer to a `mir::Place` (a place expression) instead of |
| //! an `interpret::Place` (a memory location). |
| //! |
| //! The default methods of [`ValueAnalysis`] (prefixed with `super_` instead of `handle_`) |
| //! provide some behavior that should be valid for all abstract domains that are based only on the |
| //! value stored in a certain place. On top of these default rules, an implementation should |
| //! override some of the `handle_` methods. For an example, see `ConstAnalysis`. |
| //! |
| //! An implementation must also provide a [`Map`]. Before the analysis begins, all places that |
| //! should be tracked during the analysis must be registered. During the analysis, no new places |
| //! can be registered. The [`State`] can be queried to retrieve the abstract value stored for a |
| //! certain place by passing the map. |
| //! |
| //! This framework is currently experimental. Originally, it supported shared references and enum |
| //! variants. However, it was discovered that both of these were unsound, and especially references |
| //! had subtle but serious issues. In the future, they could be added back in, but we should clarify |
| //! the rules for optimizations that rely on the aliasing model first. |
| //! |
| //! |
| //! # Notes |
| //! |
| //! - The bottom state denotes uninitialized memory. Because we are only doing a sound approximation |
| //! of the actual execution, we can also use this state for places where access would be UB. |
| //! |
| //! - The assignment logic in `State::assign_place_idx` assumes that the places are non-overlapping, |
| //! or identical. Note that this refers to place expressions, not memory locations. |
| //! |
| //! - Currently, places that have their reference taken cannot be tracked. Although this would be |
| //! possible, it has to rely on some aliasing model, which we are not ready to commit to yet. |
| //! Because of that, we can assume that the only way to change the value behind a tracked place is |
| //! by direct assignment. |
| |
| use std::fmt::{Debug, Formatter}; |
| |
| use rustc_data_structures::fx::FxHashMap; |
| use rustc_index::vec::IndexVec; |
| use rustc_middle::mir::visit::{MutatingUseContext, PlaceContext, Visitor}; |
| use rustc_middle::mir::*; |
| use rustc_middle::ty::{self, Ty, TyCtxt}; |
| use rustc_target::abi::VariantIdx; |
| |
| use crate::lattice::{HasBottom, HasTop}; |
| use crate::{ |
| fmt::DebugWithContext, Analysis, AnalysisDomain, CallReturnPlaces, JoinSemiLattice, |
| SwitchIntEdgeEffects, |
| }; |
| |
| pub trait ValueAnalysis<'tcx> { |
| /// For each place of interest, the analysis tracks a value of the given type. |
| type Value: Clone + JoinSemiLattice + HasBottom + HasTop; |
| |
| const NAME: &'static str; |
| |
| fn map(&self) -> ⤅ |
| |
| fn handle_statement(&self, statement: &Statement<'tcx>, state: &mut State<Self::Value>) { |
| self.super_statement(statement, state) |
| } |
| |
| fn super_statement(&self, statement: &Statement<'tcx>, state: &mut State<Self::Value>) { |
| match &statement.kind { |
| StatementKind::Assign(box (place, rvalue)) => { |
| self.handle_assign(*place, rvalue, state); |
| } |
| StatementKind::SetDiscriminant { .. } => { |
| // Could treat this as writing a constant to a pseudo-place. |
| // But discriminants are currently not tracked, so we do nothing. |
| // Related: https://github.com/rust-lang/unsafe-code-guidelines/issues/84 |
| } |
| StatementKind::Intrinsic(box intrinsic) => { |
| self.handle_intrinsic(intrinsic, state); |
| } |
| StatementKind::StorageLive(local) | StatementKind::StorageDead(local) => { |
| // StorageLive leaves the local in an uninitialized state. |
| // StorageDead makes it UB to access the local afterwards. |
| state.flood_with(Place::from(*local).as_ref(), self.map(), Self::Value::bottom()); |
| } |
| StatementKind::Deinit(box place) => { |
| // Deinit makes the place uninitialized. |
| state.flood_with(place.as_ref(), self.map(), Self::Value::bottom()); |
| } |
| StatementKind::Retag(..) => { |
| // We don't track references. |
| } |
| StatementKind::Nop |
| | StatementKind::FakeRead(..) |
| | StatementKind::Coverage(..) |
| | StatementKind::AscribeUserType(..) => (), |
| } |
| } |
| |
| fn handle_intrinsic( |
| &self, |
| intrinsic: &NonDivergingIntrinsic<'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| self.super_intrinsic(intrinsic, state); |
| } |
| |
| fn super_intrinsic( |
| &self, |
| intrinsic: &NonDivergingIntrinsic<'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| match intrinsic { |
| NonDivergingIntrinsic::Assume(..) => { |
| // Could use this, but ignoring it is sound. |
| } |
| NonDivergingIntrinsic::CopyNonOverlapping(CopyNonOverlapping { dst, .. }) => { |
| if let Some(place) = dst.place() { |
| state.flood(place.as_ref(), self.map()); |
| } |
| } |
| } |
| } |
| |
| fn handle_assign( |
| &self, |
| target: Place<'tcx>, |
| rvalue: &Rvalue<'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| self.super_assign(target, rvalue, state) |
| } |
| |
| fn super_assign( |
| &self, |
| target: Place<'tcx>, |
| rvalue: &Rvalue<'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| let result = self.handle_rvalue(rvalue, state); |
| state.assign(target.as_ref(), result, self.map()); |
| } |
| |
| fn handle_rvalue( |
| &self, |
| rvalue: &Rvalue<'tcx>, |
| state: &mut State<Self::Value>, |
| ) -> ValueOrPlace<Self::Value> { |
| self.super_rvalue(rvalue, state) |
| } |
| |
| fn super_rvalue( |
| &self, |
| rvalue: &Rvalue<'tcx>, |
| state: &mut State<Self::Value>, |
| ) -> ValueOrPlace<Self::Value> { |
| match rvalue { |
| Rvalue::Use(operand) => self.handle_operand(operand, state), |
| Rvalue::CopyForDeref(place) => self.handle_operand(&Operand::Copy(*place), state), |
| Rvalue::Ref(..) | Rvalue::AddressOf(..) => { |
| // We don't track such places. |
| ValueOrPlace::top() |
| } |
| Rvalue::Repeat(..) |
| | Rvalue::ThreadLocalRef(..) |
| | Rvalue::Len(..) |
| | Rvalue::Cast(..) |
| | Rvalue::BinaryOp(..) |
| | Rvalue::CheckedBinaryOp(..) |
| | Rvalue::NullaryOp(..) |
| | Rvalue::UnaryOp(..) |
| | Rvalue::Discriminant(..) |
| | Rvalue::Aggregate(..) |
| | Rvalue::ShallowInitBox(..) => { |
| // No modification is possible through these r-values. |
| ValueOrPlace::top() |
| } |
| } |
| } |
| |
| fn handle_operand( |
| &self, |
| operand: &Operand<'tcx>, |
| state: &mut State<Self::Value>, |
| ) -> ValueOrPlace<Self::Value> { |
| self.super_operand(operand, state) |
| } |
| |
| fn super_operand( |
| &self, |
| operand: &Operand<'tcx>, |
| state: &mut State<Self::Value>, |
| ) -> ValueOrPlace<Self::Value> { |
| match operand { |
| Operand::Constant(box constant) => { |
| ValueOrPlace::Value(self.handle_constant(constant, state)) |
| } |
| Operand::Copy(place) | Operand::Move(place) => { |
| // On move, we would ideally flood the place with bottom. But with the current |
| // framework this is not possible (similar to `InterpCx::eval_operand`). |
| self.map() |
| .find(place.as_ref()) |
| .map(ValueOrPlace::Place) |
| .unwrap_or(ValueOrPlace::top()) |
| } |
| } |
| } |
| |
| fn handle_constant( |
| &self, |
| constant: &Constant<'tcx>, |
| state: &mut State<Self::Value>, |
| ) -> Self::Value { |
| self.super_constant(constant, state) |
| } |
| |
| fn super_constant( |
| &self, |
| _constant: &Constant<'tcx>, |
| _state: &mut State<Self::Value>, |
| ) -> Self::Value { |
| Self::Value::top() |
| } |
| |
| /// The effect of a successful function call return should not be |
| /// applied here, see [`Analysis::apply_terminator_effect`]. |
| fn handle_terminator(&self, terminator: &Terminator<'tcx>, state: &mut State<Self::Value>) { |
| self.super_terminator(terminator, state) |
| } |
| |
| fn super_terminator(&self, terminator: &Terminator<'tcx>, _state: &mut State<Self::Value>) { |
| match &terminator.kind { |
| TerminatorKind::Call { .. } | TerminatorKind::InlineAsm { .. } => { |
| // Effect is applied by `handle_call_return`. |
| } |
| TerminatorKind::Drop { .. } => { |
| // We don't track dropped places. |
| } |
| TerminatorKind::DropAndReplace { .. } | TerminatorKind::Yield { .. } => { |
| // They would have an effect, but are not allowed in this phase. |
| bug!("encountered disallowed terminator"); |
| } |
| TerminatorKind::Goto { .. } |
| | TerminatorKind::SwitchInt { .. } |
| | TerminatorKind::Resume |
| | TerminatorKind::Abort |
| | TerminatorKind::Return |
| | TerminatorKind::Unreachable |
| | TerminatorKind::Assert { .. } |
| | TerminatorKind::GeneratorDrop |
| | TerminatorKind::FalseEdge { .. } |
| | TerminatorKind::FalseUnwind { .. } => { |
| // These terminators have no effect on the analysis. |
| } |
| } |
| } |
| |
| fn handle_call_return( |
| &self, |
| return_places: CallReturnPlaces<'_, 'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| self.super_call_return(return_places, state) |
| } |
| |
| fn super_call_return( |
| &self, |
| return_places: CallReturnPlaces<'_, 'tcx>, |
| state: &mut State<Self::Value>, |
| ) { |
| return_places.for_each(|place| { |
| state.flood(place.as_ref(), self.map()); |
| }) |
| } |
| |
| fn handle_switch_int( |
| &self, |
| discr: &Operand<'tcx>, |
| apply_edge_effects: &mut impl SwitchIntEdgeEffects<State<Self::Value>>, |
| ) { |
| self.super_switch_int(discr, apply_edge_effects) |
| } |
| |
| fn super_switch_int( |
| &self, |
| _discr: &Operand<'tcx>, |
| _apply_edge_effects: &mut impl SwitchIntEdgeEffects<State<Self::Value>>, |
| ) { |
| } |
| |
| fn wrap(self) -> ValueAnalysisWrapper<Self> |
| where |
| Self: Sized, |
| { |
| ValueAnalysisWrapper(self) |
| } |
| } |
| |
| pub struct ValueAnalysisWrapper<T>(pub T); |
| |
| impl<'tcx, T: ValueAnalysis<'tcx>> AnalysisDomain<'tcx> for ValueAnalysisWrapper<T> { |
| type Domain = State<T::Value>; |
| |
| type Direction = crate::Forward; |
| |
| const NAME: &'static str = T::NAME; |
| |
| fn bottom_value(&self, _body: &Body<'tcx>) -> Self::Domain { |
| State(StateData::Unreachable) |
| } |
| |
| fn initialize_start_block(&self, body: &Body<'tcx>, state: &mut Self::Domain) { |
| // The initial state maps all tracked places of argument projections to ⊤ and the rest to ⊥. |
| assert!(matches!(state.0, StateData::Unreachable)); |
| let values = IndexVec::from_elem_n(T::Value::bottom(), self.0.map().value_count); |
| *state = State(StateData::Reachable(values)); |
| for arg in body.args_iter() { |
| state.flood(PlaceRef { local: arg, projection: &[] }, self.0.map()); |
| } |
| } |
| } |
| |
| impl<'tcx, T> Analysis<'tcx> for ValueAnalysisWrapper<T> |
| where |
| T: ValueAnalysis<'tcx>, |
| { |
| fn apply_statement_effect( |
| &self, |
| state: &mut Self::Domain, |
| statement: &Statement<'tcx>, |
| _location: Location, |
| ) { |
| if state.is_reachable() { |
| self.0.handle_statement(statement, state); |
| } |
| } |
| |
| fn apply_terminator_effect( |
| &self, |
| state: &mut Self::Domain, |
| terminator: &Terminator<'tcx>, |
| _location: Location, |
| ) { |
| if state.is_reachable() { |
| self.0.handle_terminator(terminator, state); |
| } |
| } |
| |
| fn apply_call_return_effect( |
| &self, |
| state: &mut Self::Domain, |
| _block: BasicBlock, |
| return_places: crate::CallReturnPlaces<'_, 'tcx>, |
| ) { |
| if state.is_reachable() { |
| self.0.handle_call_return(return_places, state) |
| } |
| } |
| |
| fn apply_switch_int_edge_effects( |
| &self, |
| _block: BasicBlock, |
| discr: &Operand<'tcx>, |
| apply_edge_effects: &mut impl SwitchIntEdgeEffects<Self::Domain>, |
| ) { |
| // FIXME: Dataflow framework provides no access to current state here. |
| self.0.handle_switch_int(discr, apply_edge_effects) |
| } |
| } |
| |
| rustc_index::newtype_index!( |
| /// This index uniquely identifies a place. |
| /// |
| /// Not every place has a `PlaceIndex`, and not every `PlaceIndex` correspondends to a tracked |
| /// place. However, every tracked place and all places along its projection have a `PlaceIndex`. |
| pub struct PlaceIndex {} |
| ); |
| |
| rustc_index::newtype_index!( |
| /// This index uniquely identifies a tracked place and therefore a slot in [`State`]. |
| /// |
| /// It is an implementation detail of this module. |
| struct ValueIndex {} |
| ); |
| |
| /// See [`State`]. |
| #[derive(PartialEq, Eq, Debug)] |
| enum StateData<V> { |
| Reachable(IndexVec<ValueIndex, V>), |
| Unreachable, |
| } |
| |
| impl<V: Clone> Clone for StateData<V> { |
| fn clone(&self) -> Self { |
| match self { |
| Self::Reachable(x) => Self::Reachable(x.clone()), |
| Self::Unreachable => Self::Unreachable, |
| } |
| } |
| |
| fn clone_from(&mut self, source: &Self) { |
| match (&mut *self, source) { |
| (Self::Reachable(x), Self::Reachable(y)) => { |
| // We go through `raw` here, because `IndexVec` currently has a naive `clone_from`. |
| x.raw.clone_from(&y.raw); |
| } |
| _ => *self = source.clone(), |
| } |
| } |
| } |
| |
| /// The dataflow state for an instance of [`ValueAnalysis`]. |
| /// |
| /// Every instance specifies a lattice that represents the possible values of a single tracked |
| /// place. If we call this lattice `V` and set of tracked places `P`, then a [`State`] is an |
| /// element of `{unreachable} ∪ (P -> V)`. This again forms a lattice, where the bottom element is |
| /// `unreachable` and the top element is the mapping `p ↦ ⊤`. Note that the mapping `p ↦ ⊥` is not |
| /// the bottom element (because joining an unreachable and any other reachable state yields a |
| /// reachable state). All operations on unreachable states are ignored. |
| /// |
| /// Flooding means assigning a value (by default `⊤`) to all tracked projections of a given place. |
| #[derive(PartialEq, Eq, Debug)] |
| pub struct State<V>(StateData<V>); |
| |
| impl<V: Clone> Clone for State<V> { |
| fn clone(&self) -> Self { |
| Self(self.0.clone()) |
| } |
| |
| fn clone_from(&mut self, source: &Self) { |
| self.0.clone_from(&source.0); |
| } |
| } |
| |
| impl<V: Clone + HasTop + HasBottom> State<V> { |
| pub fn is_reachable(&self) -> bool { |
| matches!(&self.0, StateData::Reachable(_)) |
| } |
| |
| pub fn mark_unreachable(&mut self) { |
| self.0 = StateData::Unreachable; |
| } |
| |
| pub fn flood_all(&mut self) { |
| self.flood_all_with(V::top()) |
| } |
| |
| pub fn flood_all_with(&mut self, value: V) { |
| let StateData::Reachable(values) = &mut self.0 else { return }; |
| values.raw.fill(value); |
| } |
| |
| pub fn flood_with(&mut self, place: PlaceRef<'_>, map: &Map, value: V) { |
| if let Some(root) = map.find(place) { |
| self.flood_idx_with(root, map, value); |
| } |
| } |
| |
| pub fn flood(&mut self, place: PlaceRef<'_>, map: &Map) { |
| self.flood_with(place, map, V::top()) |
| } |
| |
| pub fn flood_idx_with(&mut self, place: PlaceIndex, map: &Map, value: V) { |
| let StateData::Reachable(values) = &mut self.0 else { return }; |
| map.preorder_invoke(place, &mut |place| { |
| if let Some(vi) = map.places[place].value_index { |
| values[vi] = value.clone(); |
| } |
| }); |
| } |
| |
| pub fn flood_idx(&mut self, place: PlaceIndex, map: &Map) { |
| self.flood_idx_with(place, map, V::top()) |
| } |
| |
| /// Copies `source` to `target`, including all tracked places beneath. |
| /// |
| /// If `target` contains a place that is not contained in `source`, it will be overwritten with |
| /// Top. Also, because this will copy all entries one after another, it may only be used for |
| /// places that are non-overlapping or identical. |
| pub fn assign_place_idx(&mut self, target: PlaceIndex, source: PlaceIndex, map: &Map) { |
| let StateData::Reachable(values) = &mut self.0 else { return }; |
| |
| // If both places are tracked, we copy the value to the target. If the target is tracked, |
| // but the source is not, we have to invalidate the value in target. If the target is not |
| // tracked, then we don't have to do anything. |
| if let Some(target_value) = map.places[target].value_index { |
| if let Some(source_value) = map.places[source].value_index { |
| values[target_value] = values[source_value].clone(); |
| } else { |
| values[target_value] = V::top(); |
| } |
| } |
| for target_child in map.children(target) { |
| // Try to find corresponding child and recurse. Reasoning is similar as above. |
| let projection = map.places[target_child].proj_elem.unwrap(); |
| if let Some(source_child) = map.projections.get(&(source, projection)) { |
| self.assign_place_idx(target_child, *source_child, map); |
| } else { |
| self.flood_idx(target_child, map); |
| } |
| } |
| } |
| |
| pub fn assign(&mut self, target: PlaceRef<'_>, result: ValueOrPlace<V>, map: &Map) { |
| if let Some(target) = map.find(target) { |
| self.assign_idx(target, result, map); |
| } else { |
| // We don't track this place nor any projections, assignment can be ignored. |
| } |
| } |
| |
| pub fn assign_idx(&mut self, target: PlaceIndex, result: ValueOrPlace<V>, map: &Map) { |
| match result { |
| ValueOrPlace::Value(value) => { |
| // First flood the target place in case we also track any projections (although |
| // this scenario is currently not well-supported by the API). |
| self.flood_idx(target, map); |
| let StateData::Reachable(values) = &mut self.0 else { return }; |
| if let Some(value_index) = map.places[target].value_index { |
| values[value_index] = value; |
| } |
| } |
| ValueOrPlace::Place(source) => self.assign_place_idx(target, source, map), |
| } |
| } |
| |
| /// Retrieve the value stored for a place, or ⊤ if it is not tracked. |
| pub fn get(&self, place: PlaceRef<'_>, map: &Map) -> V { |
| map.find(place).map(|place| self.get_idx(place, map)).unwrap_or(V::top()) |
| } |
| |
| /// Retrieve the value stored for a place index, or ⊤ if it is not tracked. |
| pub fn get_idx(&self, place: PlaceIndex, map: &Map) -> V { |
| match &self.0 { |
| StateData::Reachable(values) => { |
| map.places[place].value_index.map(|v| values[v].clone()).unwrap_or(V::top()) |
| } |
| StateData::Unreachable => { |
| // Because this is unreachable, we can return any value we want. |
| V::bottom() |
| } |
| } |
| } |
| } |
| |
| impl<V: JoinSemiLattice + Clone> JoinSemiLattice for State<V> { |
| fn join(&mut self, other: &Self) -> bool { |
| match (&mut self.0, &other.0) { |
| (_, StateData::Unreachable) => false, |
| (StateData::Unreachable, _) => { |
| *self = other.clone(); |
| true |
| } |
| (StateData::Reachable(this), StateData::Reachable(other)) => this.join(other), |
| } |
| } |
| } |
| |
| /// Partial mapping from [`Place`] to [`PlaceIndex`], where some places also have a [`ValueIndex`]. |
| /// |
| /// This data structure essentially maintains a tree of places and their projections. Some |
| /// additional bookkeeping is done, to speed up traversal over this tree: |
| /// - For iteration, every [`PlaceInfo`] contains an intrusive linked list of its children. |
| /// - To directly get the child for a specific projection, there is a `projections` map. |
| #[derive(Debug)] |
| pub struct Map { |
| locals: IndexVec<Local, Option<PlaceIndex>>, |
| projections: FxHashMap<(PlaceIndex, TrackElem), PlaceIndex>, |
| places: IndexVec<PlaceIndex, PlaceInfo>, |
| value_count: usize, |
| } |
| |
| impl Map { |
| fn new() -> Self { |
| Self { |
| locals: IndexVec::new(), |
| projections: FxHashMap::default(), |
| places: IndexVec::new(), |
| value_count: 0, |
| } |
| } |
| |
| /// Returns a map that only tracks places whose type passes the filter. |
| /// |
| /// This is currently the only way to create a [`Map`]. The way in which the tracked places are |
| /// chosen is an implementation detail and may not be relied upon (other than that their type |
| /// passes the filter). |
| #[instrument(skip_all, level = "debug")] |
| pub fn from_filter<'tcx>( |
| tcx: TyCtxt<'tcx>, |
| body: &Body<'tcx>, |
| filter: impl FnMut(Ty<'tcx>) -> bool, |
| ) -> Self { |
| let mut map = Self::new(); |
| let exclude = excluded_locals(body); |
| map.register_with_filter(tcx, body, filter, &exclude); |
| debug!("registered {} places ({} nodes in total)", map.value_count, map.places.len()); |
| map |
| } |
| |
| /// Register all non-excluded places that pass the filter. |
| fn register_with_filter<'tcx>( |
| &mut self, |
| tcx: TyCtxt<'tcx>, |
| body: &Body<'tcx>, |
| mut filter: impl FnMut(Ty<'tcx>) -> bool, |
| exclude: &IndexVec<Local, bool>, |
| ) { |
| // We use this vector as stack, pushing and popping projections. |
| let mut projection = Vec::new(); |
| for (local, decl) in body.local_decls.iter_enumerated() { |
| if !exclude[local] { |
| self.register_with_filter_rec(tcx, local, &mut projection, decl.ty, &mut filter); |
| } |
| } |
| } |
| |
| /// Potentially register the (local, projection) place and its fields, recursively. |
| /// |
| /// Invariant: The projection must only contain fields. |
| fn register_with_filter_rec<'tcx>( |
| &mut self, |
| tcx: TyCtxt<'tcx>, |
| local: Local, |
| projection: &mut Vec<PlaceElem<'tcx>>, |
| ty: Ty<'tcx>, |
| filter: &mut impl FnMut(Ty<'tcx>) -> bool, |
| ) { |
| // Note: The framework supports only scalars for now. |
| if filter(ty) && ty.is_scalar() { |
| // We know that the projection only contains trackable elements. |
| let place = self.make_place(local, projection).unwrap(); |
| |
| // Allocate a value slot if it doesn't have one. |
| if self.places[place].value_index.is_none() { |
| self.places[place].value_index = Some(self.value_count.into()); |
| self.value_count += 1; |
| } |
| } |
| |
| // Recurse with all fields of this place. |
| iter_fields(ty, tcx, |variant, field, ty| { |
| if variant.is_some() { |
| // Downcasts are currently not supported. |
| return; |
| } |
| projection.push(PlaceElem::Field(field, ty)); |
| self.register_with_filter_rec(tcx, local, projection, ty, filter); |
| projection.pop(); |
| }); |
| } |
| |
| /// Tries to add the place to the map, without allocating a value slot. |
| /// |
| /// Can fail if the projection contains non-trackable elements. |
| fn make_place<'tcx>( |
| &mut self, |
| local: Local, |
| projection: &[PlaceElem<'tcx>], |
| ) -> Result<PlaceIndex, ()> { |
| // Get the base index of the local. |
| let mut index = |
| *self.locals.get_or_insert_with(local, || self.places.push(PlaceInfo::new(None))); |
| |
| // Apply the projection. |
| for &elem in projection { |
| let elem = elem.try_into()?; |
| index = *self.projections.entry((index, elem)).or_insert_with(|| { |
| // Prepend new child to the linked list. |
| let next = self.places.push(PlaceInfo::new(Some(elem))); |
| self.places[next].next_sibling = self.places[index].first_child; |
| self.places[index].first_child = Some(next); |
| next |
| }); |
| } |
| |
| Ok(index) |
| } |
| |
| /// Returns the number of tracked places, i.e., those for which a value can be stored. |
| pub fn tracked_places(&self) -> usize { |
| self.value_count |
| } |
| |
| /// Applies a single projection element, yielding the corresponding child. |
| pub fn apply(&self, place: PlaceIndex, elem: TrackElem) -> Option<PlaceIndex> { |
| self.projections.get(&(place, elem)).copied() |
| } |
| |
| /// Locates the given place, if it exists in the tree. |
| pub fn find(&self, place: PlaceRef<'_>) -> Option<PlaceIndex> { |
| let mut index = *self.locals.get(place.local)?.as_ref()?; |
| |
| for &elem in place.projection { |
| index = self.apply(index, elem.try_into().ok()?)?; |
| } |
| |
| Some(index) |
| } |
| |
| /// Iterate over all direct children. |
| pub fn children(&self, parent: PlaceIndex) -> impl Iterator<Item = PlaceIndex> + '_ { |
| Children::new(self, parent) |
| } |
| |
| /// Invoke a function on the given place and all descendants. |
| pub fn preorder_invoke(&self, root: PlaceIndex, f: &mut impl FnMut(PlaceIndex)) { |
| f(root); |
| for child in self.children(root) { |
| self.preorder_invoke(child, f); |
| } |
| } |
| } |
| |
| /// This is the information tracked for every [`PlaceIndex`] and is stored by [`Map`]. |
| /// |
| /// Together, `first_child` and `next_sibling` form an intrusive linked list, which is used to |
| /// model a tree structure (a replacement for a member like `children: Vec<PlaceIndex>`). |
| #[derive(Debug)] |
| struct PlaceInfo { |
| /// We store a [`ValueIndex`] if and only if the placed is tracked by the analysis. |
| value_index: Option<ValueIndex>, |
| |
| /// The projection used to go from parent to this node (only None for root). |
| proj_elem: Option<TrackElem>, |
| |
| /// The left-most child. |
| first_child: Option<PlaceIndex>, |
| |
| /// Index of the sibling to the right of this node. |
| next_sibling: Option<PlaceIndex>, |
| } |
| |
| impl PlaceInfo { |
| fn new(proj_elem: Option<TrackElem>) -> Self { |
| Self { next_sibling: None, first_child: None, proj_elem, value_index: None } |
| } |
| } |
| |
| struct Children<'a> { |
| map: &'a Map, |
| next: Option<PlaceIndex>, |
| } |
| |
| impl<'a> Children<'a> { |
| fn new(map: &'a Map, parent: PlaceIndex) -> Self { |
| Self { map, next: map.places[parent].first_child } |
| } |
| } |
| |
| impl<'a> Iterator for Children<'a> { |
| type Item = PlaceIndex; |
| |
| fn next(&mut self) -> Option<Self::Item> { |
| match self.next { |
| Some(child) => { |
| self.next = self.map.places[child].next_sibling; |
| Some(child) |
| } |
| None => None, |
| } |
| } |
| } |
| |
| /// Used as the result of an operand or r-value. |
| pub enum ValueOrPlace<V> { |
| Value(V), |
| Place(PlaceIndex), |
| } |
| |
| impl<V: HasTop> ValueOrPlace<V> { |
| pub fn top() -> Self { |
| ValueOrPlace::Value(V::top()) |
| } |
| } |
| |
| /// The set of projection elements that can be used by a tracked place. |
| /// |
| /// Although only field projections are currently allowed, this could change in the future. |
| #[derive(Copy, Clone, Debug, PartialEq, Eq, Hash)] |
| pub enum TrackElem { |
| Field(Field), |
| } |
| |
| impl<V, T> TryFrom<ProjectionElem<V, T>> for TrackElem { |
| type Error = (); |
| |
| fn try_from(value: ProjectionElem<V, T>) -> Result<Self, Self::Error> { |
| match value { |
| ProjectionElem::Field(field, _) => Ok(TrackElem::Field(field)), |
| _ => Err(()), |
| } |
| } |
| } |
| |
| /// Invokes `f` on all direct fields of `ty`. |
| fn iter_fields<'tcx>( |
| ty: Ty<'tcx>, |
| tcx: TyCtxt<'tcx>, |
| mut f: impl FnMut(Option<VariantIdx>, Field, Ty<'tcx>), |
| ) { |
| match ty.kind() { |
| ty::Tuple(list) => { |
| for (field, ty) in list.iter().enumerate() { |
| f(None, field.into(), ty); |
| } |
| } |
| ty::Adt(def, substs) => { |
| if def.is_union() { |
| return; |
| } |
| for (v_index, v_def) in def.variants().iter_enumerated() { |
| let variant = if def.is_struct() { None } else { Some(v_index) }; |
| for (f_index, f_def) in v_def.fields.iter().enumerate() { |
| let field_ty = f_def.ty(tcx, substs); |
| let field_ty = tcx |
| .try_normalize_erasing_regions(ty::ParamEnv::reveal_all(), field_ty) |
| .unwrap_or(field_ty); |
| f(variant, f_index.into(), field_ty); |
| } |
| } |
| } |
| ty::Closure(_, substs) => { |
| iter_fields(substs.as_closure().tupled_upvars_ty(), tcx, f); |
| } |
| _ => (), |
| } |
| } |
| |
| /// Returns all locals with projections that have their reference or address taken. |
| fn excluded_locals<'tcx>(body: &Body<'tcx>) -> IndexVec<Local, bool> { |
| struct Collector { |
| result: IndexVec<Local, bool>, |
| } |
| |
| impl<'tcx> Visitor<'tcx> for Collector { |
| fn visit_place(&mut self, place: &Place<'tcx>, context: PlaceContext, _location: Location) { |
| if context.is_borrow() |
| || context.is_address_of() |
| || context.is_drop() |
| || context == PlaceContext::MutatingUse(MutatingUseContext::AsmOutput) |
| { |
| // A pointer to a place could be used to access other places with the same local, |
| // hence we have to exclude the local completely. |
| self.result[place.local] = true; |
| } |
| } |
| } |
| |
| let mut collector = Collector { result: IndexVec::from_elem(false, &body.local_decls) }; |
| collector.visit_body(body); |
| collector.result |
| } |
| |
| /// This is used to visualize the dataflow analysis. |
| impl<'tcx, T> DebugWithContext<ValueAnalysisWrapper<T>> for State<T::Value> |
| where |
| T: ValueAnalysis<'tcx>, |
| T::Value: Debug, |
| { |
| fn fmt_with(&self, ctxt: &ValueAnalysisWrapper<T>, f: &mut Formatter<'_>) -> std::fmt::Result { |
| match &self.0 { |
| StateData::Reachable(values) => debug_with_context(values, None, ctxt.0.map(), f), |
| StateData::Unreachable => write!(f, "unreachable"), |
| } |
| } |
| |
| fn fmt_diff_with( |
| &self, |
| old: &Self, |
| ctxt: &ValueAnalysisWrapper<T>, |
| f: &mut Formatter<'_>, |
| ) -> std::fmt::Result { |
| match (&self.0, &old.0) { |
| (StateData::Reachable(this), StateData::Reachable(old)) => { |
| debug_with_context(this, Some(old), ctxt.0.map(), f) |
| } |
| _ => Ok(()), // Consider printing something here. |
| } |
| } |
| } |
| |
| fn debug_with_context_rec<V: Debug + Eq>( |
| place: PlaceIndex, |
| place_str: &str, |
| new: &IndexVec<ValueIndex, V>, |
| old: Option<&IndexVec<ValueIndex, V>>, |
| map: &Map, |
| f: &mut Formatter<'_>, |
| ) -> std::fmt::Result { |
| if let Some(value) = map.places[place].value_index { |
| match old { |
| None => writeln!(f, "{}: {:?}", place_str, new[value])?, |
| Some(old) => { |
| if new[value] != old[value] { |
| writeln!(f, "\u{001f}-{}: {:?}", place_str, old[value])?; |
| writeln!(f, "\u{001f}+{}: {:?}", place_str, new[value])?; |
| } |
| } |
| } |
| } |
| |
| for child in map.children(place) { |
| let info_elem = map.places[child].proj_elem.unwrap(); |
| let child_place_str = match info_elem { |
| TrackElem::Field(field) => { |
| if place_str.starts_with('*') { |
| format!("({}).{}", place_str, field.index()) |
| } else { |
| format!("{}.{}", place_str, field.index()) |
| } |
| } |
| }; |
| debug_with_context_rec(child, &child_place_str, new, old, map, f)?; |
| } |
| |
| Ok(()) |
| } |
| |
| fn debug_with_context<V: Debug + Eq>( |
| new: &IndexVec<ValueIndex, V>, |
| old: Option<&IndexVec<ValueIndex, V>>, |
| map: &Map, |
| f: &mut Formatter<'_>, |
| ) -> std::fmt::Result { |
| for (local, place) in map.locals.iter_enumerated() { |
| if let Some(place) = place { |
| debug_with_context_rec(*place, &format!("{:?}", local), new, old, map, f)?; |
| } |
| } |
| Ok(()) |
| } |